Optical Flame Detectors

The EQP Addressable Smoke Module (Spec Sheet: 90-1226) is designed to expand the input and output capability of the Det-Tronics EQP system. The ASM is an interface device designed to provide continuous and automated fire protection. It ensures system operation through continuous supervision of system inputs/outputs and Local Operating Network/Signaling Line Circuit (LON/SLC) monitoring in the controller. The ASM is located directly on the LON of the EQP system, with a loop of up to 100 addressable devices tied into the ASM. This allows the EQP controller to annunciate a fire alarm from either its own LON based I/O or from the ASM connected addressable smoke and heat detection loops. System status can be determined using the troubleshooting procedures, Eagle Quantum Safety System Software (S3), and the status indicators on the module. Expands the capabilities of the Det-Tronics EQP system Class 1 Div. 2 locations combined with Zone 2 rated devices Type N SIL 2 Capable certification Provides power and communications to 100 addressable devices Uses Apollo Discovery and XP95 smoke and heat detectors ASM alarm and fault status are logged in the EQP controller LEDs for easy annunciation of power, faults and an active device on the loop Monitors single addressable devices Provides remote I/O capabilities via LON/SLC DIN rail or panel mounting Plug-in wiring connectors RFI and EMI hardened Smoke detectors are globally approved (see product data sheets) Option Intrinsically Safe detectors EQ3760 ASM Model Matrix MODEL DESCRIPTION EQ3760 Addressable Smoke Module (ASM)   TYPE MOUNTING OPTION D DIN Rail P Panel   TYPE APPROVALS T FM/CSA/ATEX/IECEx   EQ3760 ASM Module Model Part Number Material FM/CSA/ATEX/IECEx Ship Weight EQ3760DT 014050-001 AL X 3 lb (1.4 kg) EQ3760PT 014050-002 AL X 3 lb (1.4 kg)   Devices for EQ3760 ASM Module Model Part Number Material APOLLO IONIZATION SMOKE, EU 000515-501 58000-500 APOLLO OPTICAL SMOKE, EU 000515-502 58000-600 APOLLO HEAT DETECTOR, EU 000515-503 58000-400 APOLLO MULTISENSOR, EU 000515-504 58000-700 APOLLO CO DETECTOR, EU 000515-505 58000-300 APOLLO INTELLIGENT MNT BASE,EU 000515-506 45681-210 APOLLO ISOLATING BASE 000515-507 45681-284 APOLLO INTELLIGENT ISOLATOR 000515-508 55000-720 APOLLO I/O UNIT W/ ISOLATOR 000515-509 55000-847 APOLLO SOUNDER CONTROL UNIT 000515-510 55000-852 APOLLO SWITCH MONITOR PLUS 000515-511 55000-841 APOLLO MANUAL CALL W/ISOLATOR 000515-512 58100-908 APOLLO MANUAL CALL, W/ISO,IP66 000515-513 58100-951 APOLLO MANUAL CALL COVER 000515-514 26729-152 APOLLO SOUNDER, 100DB, RED 000515-515 55000-278 APOLLO SOUNDER,100DB,RED,IP66 000515-516 55000-274 APOLLO BEACON,RED 000515-517 55000-877 APOLLO SOUNDER/BEACON, W/ISO 000515-518 55000-293 APOLLO INTELLIGENT ISOLATOR BA 000515-519 45681-211 APOLLO BLANK ADDRESS CARD 000515-521 38531-771 APOLLO IONIZATION SMOKE, NA 000515-551 58000-550 APOLLO OPTICAL SMOKE, NA 000515-552 58000-650 APOLLO HEAT DETECTOR, NA 000515-553 58000-450 APOLLO MULTISENSOR, NA 000515-554 58000-750 APOLLO MOUNTING BASE 4",NA 000515-555 45681-210USA APOLLO MOUNTING BASE 6",NA 000515-556 45681-225USA APOLLO ISOLATOR, NA 000515-557 55000-750 APOLLO ISOLATOR BASE, NA 000515-558 45681-211USA APOLLO PRIORITY SWITCH MONITOR 000515-559 55000-806 APOLLO SOUNDER CONTROL MOD,NA 000515-560 55000-825 APOLLO I/O MODULE, NA 000515-561 55000-820 APOLLO MINI MONITOR MOD, NA 000515-562 55000-765 APOLLO INTELLIGENT DEEP BASE 000515-563 45681-209 EU = European Approvals NA = North American Approvals NOTE: Average lead time is 4 weeks. For additional options please consult the factory. Compatibility list of products for ASM Description Part Number Apollo Part # Apollo Heat Detector 000515-XXX 5800-400 Apollo Heat Detector, EU Marine 000515-611 58000-400MAR Apollo Heat, IS ** 000515-585 55000-440 Apollo Heat Detector, SIL2 000515-XXX 58000-400SIL Apollo Heat Detector, FM 000515-553 58000-450 Apollo Ionization Smoke, EU 000515-501 58000-500 Apollo Ionization Smoke, Marine 000515-XXX 58000-500MAR Apollo Smoke, EU Marine Optical 000515-XXX 58000-600MAR Apollo Smoke, SIL2 Optical 000515-645 58000-600SIL Apollo Ionization Smoke, IS ** 000515-XXX 58000-540 Apollo Smoke, IS Optical ** 000515-XXX 58000-640 Apollo Ionization Smoke, FM 000515-551 58000-550 Apollo Optical Smoke Detector, FM 000515-552 58000-650 Apollo Duct Smoke Det. Base EU 000515-550 53546-022 Apollo Multisensor, EU Marine 000515-XXX 58000-700MAR Apollo Multisensor, EU 000515-504 58000-700 Apollo Multisensor, SIL2 000515-637 58000-700SIL Apollo Multisensor, FM 000515-554 58000-750 Apollo Carbon Monoxide Detector, EU 000515-505 58000-300 Apollo Input / Output Unit, with Isolator 000515-509 55000-847 Apollo Manual Call, with Isolator 000515-512 58100-908 Apollo Manual Call, with Isolator, IP66 000515-513 58100-951 Apollo Beacon, Red 000515-517 55000-877 Apollo Isolator, FM 000515-557 55000-750 Apollo XP95A Priority Switch Monitor, FM 000515-559 55000-806 Apollo XP95A Sounder Control Module, FM 000515-560 55000-825 Apollo XP95A Input / Output Module, FM 000515-561 55000-820 Apollo Mounting Base, Marine 000515-XXX 45681-210MAR Apollo Mounting Base, IS 000515-586 45681-215 Apollo Isolator Base, Marine 000515-XXX 45681-211MAR Apollo Relay Base, EU 000515-XXX 45681-242 Apollo Manual Call Point, Standard, Non-Isolated, Waterproof, IS ** 000515-581 55000-940 Apollo Manual Call Point, Break Glass, Non-Isolated, Waterproof IS ** 000515-677 55000-960 Apollo Manual Call Point, Push Button, Non-Isolated, Waterproof, IS ** 000515-617 55000-970 Apollo Manual Call, Standard, Non-Isolated, Non-Waterproof, EU 000515-XXX 55200-910 Apollo Manual Call, Standard, Non-Isolated, Waterproof, EU 000515-XXX 55200-950 Apollo Manual Call, Standard, Isolated, Waterproof, Marine 000515-XXX 58200-971MAR Apollo Manual Call, Standard, Isolated, Non-Waterproof, SIL2 000515-XXX 58200-908SIL Apollo Remote Led 1 Gang Red 000116-180 53832-070 Apollo Sounder Control Unit 000515-510 55000-852 Apollo Sounder, 100dB, Red 000515-515 55000-278 Apollo Sounder / Beacon, with Isolator 000515-518 55000-293 Apollo Sounder, 100dB, Red, IP66 000515-516 55000-274 Apollo Sounder XP95a, Isolated, Non-Weatherproof, UL 000515-XXX 55000-041 Apollo Sounder Beacon Discovery, Non-Isolated, Non-Weatherproof, EU 000515-XXX 58000-005 Apollo Sounder Beacon XP95, Isolated, Waterproof, EU 000515-520 55000-298 Apollo Sounder Beacon Discovery, Non-Isolated, Weatherproof, Marine 000515-XXX 55000-374MAR Apollo Sounder Beacon Discovery, Non-Isolated, Weatherproof, UL 000515-XXX 58000-011 Apollo Sounder Beacon Discovery, Isolated, Weatherproof, Marine 000515-XXX 55000-398MAR Apollo Sounder Control, Din Rail, EU 000515-XXX 55000-182 Apollo Sounder Control, Din Rail, Marine 000515-XXX 55000-181MAR Apollo I/O, Din Rail, EU 000515-576 55000-803 Apollo I/O, Din Rail, Marine 000515-XXX 55000-774MAR Apollo 3 Channel I/O, Standard, EU 000515-XXX 55000-588 Apollo I/O, Standard, SIL2 000515-XXX 55000-847SIL Apollo Relay Output, Din Rail, EU 000515-XXX 55000-804 Apollo Relay Output, Din Rail, Marine 000515-XXX 55000-771MAR Apollo Switch Monitor Plus 000515-511 55000-841 Apollo Switch Monitor, Din Rail, EU 000515-675 55000-822 Apollo Switch Monitor Plus, Din Rail, Marine 000515-XXX 55000-772MAR Apollo Mini Switch Monitor, Mini, Marine 000515-XXX 55000-775MAR Apollo Zone Monitor, Standard, Eu 000515-XXX 55000-845 Apollo Zone Monitor, Din Rail, Eu 000515-575 55000-812 Apollo Zone Monitor, Din Rail, Marine 000515-XXX 55000-773MAR Apollo Vac I/O, Standard, FM 000515-XXX 55000-859 Apollo Is Protocol Translator, Sgl ** 000515-582 55000-855 Apollo Is Protocol Translator, Dbl ** 000515-583 55000-856 Apollo Is Galvanic Barrier ** 000515-XXX 29600-098 Apollo Isolator, Marine 000515-XXX 55000-721MAR Apollo Mini Monitor Module, NA or Apollo Priority Mini Switch Monitor, FM 000515-562 55000-765* The device type depends on the priority switch setting on the device. ** Not FM approved as non-interfering FM = FM Approved EU = European Approvals

X2200 UV Flame Detector (Spec Sheet: 90-1157) meets the most stringent requirements worldwide with advanced signal processing and immunity to extraneous sources, combined with Ultra-high speed capability. The detector is equipped with both automatic and manual oi (optical integrity). The detector has Division and Zone explosion-proof ratings and is suitable for use in a variety of applications. The standard output configuration includes fire, fault, and auxiliary relays with RS-485 Modbus. Optional 0-20 mA, Pulse, Eagle Quantum Premier, or HART outputs are also available. A model with pulse output is available for easy retrofitting into existing Det-Tronics R74XX controller based systems. The X2200 housing is available in aluminum or stainless steel, with NEMA/Type 4X and IP66/IP67 rating. Typical applications include: HVDC converter stations, munitions, sulfur production, and silane storage. Models available with SIL 2 certification ARC rejection - Advanced signal processing Unequaled false alarm rejection - Solar blind Responds to a fire in the presence of modulated blackbody radiation without false alarm Ultra-High speed capability Optional HART output and AMS aware Automatic, manual, or magnetic oi (optical integrity) testing Pulse output for compatibility with Det-Tronics R74XX controller-based systems (optional) FM, CSA, ATEX, CE, and IECEx EN 54 part 10 certified by BRE, LPCB Tricolor LED indicates normal operation, fire, and fault conditions Mounting arm allows easy sighting Integral wiring compartment for ease of installation Terminal block allows for Class X Pathway Designation per NFPA 72 EMI, RFI, EMC Directive Compliant Built-in data logging / event monitoring Models available with integral Explosion-proof camera option (xWatch) Molybdenum Model available for applications that require increased spectral sensitivity    X2200 Model Matrix MODEL DESCRIPTION X2200  UV Flame Detector X2200G UV Flame Detector with Kr85 free Source Tube X2200M* UV Flame Detector with Molybdenum Tube X2200GM* UV Flame Detector with Molybdenum Tube, Kr85 free   TYPE MATERIAL A Aluminum (AL) S Stainless Steel (SS)   TYPE THREAD TYPE 3M  3 Port, M25† 3N 3 Port, 3/4" NPT† 4M 4 Port, M25 4N 4 Port, 3/4" NPT   TYPE OUTPUTS 11 Relay 13 Relay and 0-20 mA 14 Eagle Quantum Premier 15 Relay and Pulse 16 Addressable Module Only (third-party type) 23‡ HART, Relay, and 0-20 mA 24 Eagle Quantum 33 Relay and 0-20 mA / NTSC (xWatch) 34 Eagle Quantum Premier / NTSC (xWatch) 43  Relay and 0-20 mA / PAL (xWatch) 44 Eagle Quantum Premier / PAL (xWatch)   TYPE APPROVALS§ A FM/CSA B INMETRO (BRAZIL) E ATEX/IECEx/EN 54-10 R VNIIPO/VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx U  TCCExEE/UKRCEPRO (UKRAINE) W FM/CSA/ATEX/IECEx   TYPE CLASSIFICATION 1 Division/Zone Ex d e 2 Division/Zone Ex d   *Special Application - consult factory before ordering. †3 port models are only available with output types 33, 34, 43, and 44 (xWatch) ‡Type 23 Output - When HART output chosen detector does not have RS-485 communication available. §Type Approvals can use one or more letters to designate the approvals of the product   Table D1 - X2200 Software Part Number Configuration Matrix Dash UV Sensitivity Arc Rejection Alarm Relay Aux Output Function Aux Relay Fault Relay -001 High High De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -002 High Very High De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -003 High Off De-Energized Non-latching Pre-Alarm Energized Non-latching Energized Non-latching -005 Medium High De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -006 High High De-Energized Non-latching Pre-Alarm Energized Non-latching Energized Non-latching -007 High High De-Energized Latching Follows Alarm De-energized Latching Energized Non-latching -008 High Very High De-Energized Latching Follows Alarm De-energized Latching Energized Non-latching -009 High Off De-Energized Latching Pre-Alarm De-energized Latching Energized Non-latching -010 Medium High De-Energized Latching Follows Alarm De-energized Latching Energized Non-latching -011 High High De-Energized Latching Pre-Alarm De-energized Latching Energized Non-latching -013* High Off De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -014* High Off De-Energized Latching Follows Alarm De-Energized Non-latching Energized Non-latching -015 Very High Low De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -016 Very High Low De-Energized Latching Follows Alarm De-Energized Non-latching Energized Non-latching -017 Very High Off De-Energized Non-latching Pre-Alarm Energized Non-latching Energized Non-latching -018 Very High Off De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -019 Very High Off De-Energized Non-latching Pre-Alarm De-Energized Non-latching Energized Non-latching *Available only on the X2200M model ARC = Arc Rejection. An algorithm that prevents false alarms from transient UV sources Application Guidelines The following criteria should be considered when choosing a sensitivity level for the intended application: Speed of response based on fuel type and fire size Distance between the hazard and the flame detector These are typical industry application settings. They may not be applicable to all installations. Contact factory for additional application guidance. HVDC 019 Compressor 002 High Speed 003 Automotive 005 Turbine 006 Munitions 013/019 NOTE: Latching relays cannot be used in voted systems. X2200 UV Flame Detector - SIL 2 Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone SIL/FM/CSA/ ATEX/IECEx X2200A4N13T1 008430-XXX AL 3/4 NPT Relay/0-20 mA X X X2200A4M13T1 008431-XXX AL M25 Relay/0-20 mA X X X2200S4N13T1 008432-XXX SS 3/4 NPT Relay/0-20 mA X X X2200S4M13T1 008433-XXX SS M25 Relay/0-20 mA X X X2200A4N13T2 008434-XXX AL 3/4 NPT Relay/0-20 mA X X X2200A4M13T2 008435-XXX AL M25 Relay/0-20 mA X X X2200S4N13T2 008436-XXX SS 3/4 NPT Relay/0-20 mA X X X2200S4M13T2 008437-XXX SS M25 Relay/0-20 mA X X X2200A4N23T1 008438-XXX AL 3/4 NPT Rly/0-20/HART X X X2200A4M23T1 008439-XXX AL M25 Rly/0-20/HART X X X2200S4N23T1 008440-XXX SS 3/4 NPT Rly/0-20/HART X X X2200S4M23T1 008441-XXX SS M25 Rly/0-20/HART X X X2200A4N23T2 008442-XXX AL 3/4 NPT Rly/0-20/HART X X X2200A4M23T2 008443-XXX AL M25 Rly/0-20/HART X X X2200S4N23T2 008444-XXX SS 3/4 NPT Rly/0-20/HART X X X2200S4M23T2 008445-XXX SS M25 Rly/0-20/HART X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg)   *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option.  X2200 UV Flame Detector - Moly - SIL 2 The X2200M UV detector utilizes a molybdenum (moly) sensing element. Moly-based sensors have an increased spectral range of 1850 to 2650 angstroms, which is better suited for detecting substances with unusual chemistry, sulfur fires, and some black powders. Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d SIL/FM/CSA/ ATEX/IECEx X2200MA4N23T1 008446-XXX AL 3/4 NPT Rly/0-20/HART X X X2200MA4M23T1 008447-XXX AL M25 Rly/0-20/HART X X X2200MS4N23T1 008448-XXX SS 3/4 NPT Rly/0-20/HART X X X2200MS4M23T1 008449-XXX SS M25 Rly/0-20/HART X X X2200MA4N23T2 008450-XXX AL 3/4 NPT Rly/0-20/HART X X X2200MA4M23T2 008451-XXX AL M25 Rly/0-20/HART X X X2200MS4N23T2 008452-XXX SS 3/4 NPT Rly/0-20/HART X X X2200MS4M23T2 008453-XXX SS M25 Rly/0-20/HART X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg)    X2200 UV Flame Detector Model Part Number * Material Threads Output Div/Zone Ex d e  Div/Zone Ex d FM/CSA/ ATEX/IECEx X2200A4N11W1 008300-XXX AL 3/4 NPT Relay X X X2200A4M11W1 008301-XXX AL M25 Relay X X X2200S4N11W1 008302-XXX SS 3/4 NPT Relay X X X2200S4M11W1 008303-XXX SS M25 Relay X X X2200A4N11W2 008304-XXX AL 3/4 NPT Relay X X X2200A4M11W2 008305-XXX AL M25 Relay X X X2200S4N11W2 008306-XXX SS 3/4 NPT Relay X X X2200S4M11W2 008307-XXX SS M25 Relay X X X2200A4N14W1 008316-001 AL 3/4 NPT EQP X X X2200A4M14W1 008317-001 AL M25 EQP X X X2200S4N14W1 008318-001 SS 3/4 NPT EQP X X X2200S4M14W1 008319-001 SS M25 EQP X X X2200A4N14W2 008320-001 AL 3/4 NPT EQP X X X2200A4M14W2 008321-001 AL M25 EQP X X X2200S4N14W2 008322-001 SS 3/4 NPT EQP X X X2200S4M14W2 008323-001 SS M25 EQP X X X2200A4N15W1 008324-XXX AL 3/4 NPT Pulse/Relay X X X2200A4M15W1 008325-XXX AL M25 Pulse/Relay X X X2200S4N15W1 008326-XXX SS 3/4 NPT Pulse/Relay X X X2200S4M15W1 008327-XXX SS M25 Pulse/Relay X X X2200A4N15W2 008328-XXX AL 3/4 NPT Pulse/Relay X X X2200A4M15W2 008329-XXX AL M25 Pulse/Relay X X X2200S4N15W2 008330-XXX SS 3/4 NPT Pulse/Relay X X X2200S4M15W2 008331-XXX SS M25 Pulse/Relay X X X2200A4N24W1 008356-001 AL 3/4 NPT Eagle Quantum X X X2200A4M24W1 008357-001 AL M25 Eagle Quantum X X X2200S4N24W1 008358-001 SS 3/4 NPT Eagle Quantum X X X2200S4M24W1 008359-001 SS M25 Eagle Quantum X X X2200A4N24W2 008360-001 AL 3/4 NPT Eagle Quantum X X X2200A4M24W2 008361-001 AL M25 Eagle Quantum X X X2200S4N24W2 008362-001 SS 3/4 NPT Eagle Quantum X X X2200S4M24W2 008363-001 SS M25 Eagle Quantum X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option. The EQ and EQP detectors are completely configurable using the configuration software and are shipped defaulted to the -001 setting. X2200M UV Flame Detector - Moly The X2200M UV detector utilizes a molybdenum (moly) sensing element. Moly-based sensors have an increased spectral range of 1850 to 2650 angstroms, which is better suited for detecting substances with unusual chemistry, sulfur fires, and some black powders. Model Part Number * Material Threads Output Div/Zone Ex d e  Div/Zone Ex d FM/CSA/ ATEX/IECEx X2200MA4N13W1 008340-013 AL 3/4 NPT Relay/0-20 mA X X X2200MA4M13W1 008341-013 AL M25 Relay/0-20 mA X X X2200MS4N13W1 008342-013 SS 3/4 NPT Relay/0-20 mA X X X2200MS4M13W1 008343-013 SS M25 Relay/0-20 mA X X X2200MA4N13W2 008344-013 AL 3/4 NPT Relay/0-20 mA X X X2200MA4M13W2 008345-013 AL M25 Relay/0-20 mA X X X2200MS4N13W2 008346-013 SS 3/4 NPT Relay/0-20 mA X X X2200MS4M13W2 008347-013 SS M25 Relay/0-20 mA X X X2200MA4N14W1 008372-001 AL 3/4 NPT EQP X X X2200MA4M14W1 008373-001 AL M25 EQP X X X2200MS4N14W1 008374-001 SS 3/4 NPT EQP X X X2200MS4M14W1 008375-001 SS M25 EQP X X X2200MA4N14W2 008376-001 AL 3/4 NPT EQP X X X2200MA4M14W2 008377-001 AL M25 EQP X X X2200MS4N14W2 008378-001 SS 3/4 NPT EQP X X X2200MS4M14W2 008379-001 SS M25 EQP X X X2200MA4N15W1 008348-013 AL 3/4 NPT Pulse/Relay X X X2200MA4M15W1 008349-013 AL M25 Pulse/Relay X X X2200MS4N15W1 008350-013 SS 3/4 NPT Pulse/Relay X X X2200MS4M15W1 008351-013 SS M25 Pulse/Relay X X X2200MA4N15W2 008352-013 AL 3/4 NPT Pulse/Relay X X X2200MA4M15W2 008353-013 AL M25 Pulse/Relay X X X2200MS4N15W2 008354-013 SS 3/4 NPT Pulse/Relay X X X2200MS4M15W2 008355-013 SS M25 Pulse/Relay X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg)   *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option. The EQP detectors are completely configurable using the S3 configuration software and are shipped defaulted to the -001 setting. X2200G UV Flame Detector - ATEX/IECEx/EN 54-10 The X2200G UV Flame Detector contains a Kr-85 free source tube. There are no differences in detection performance when compared to an X2200. Model Part Number * Material Threads Output Div/Zone Ex d e  Div/Zone Ex d ATEX/IECEx/ EN 54-10 X2200GA4N11E1 013010-XXX AL 3/4 NPT Relay X X X2200GA4M11E1 013011-XXX AL M25 Relay X X X2200GS4N11E1 013012-XXX SS 3/4 NPT Relay X X X2200GS4M11E1 013013-XXX SS M25 Relay X X X2200GA4N11E2 013014-XXX AL 3/4 NPT Relay X X X2200GA4M11E2 013015-XXX AL M25 Relay X X X2200GS4N11E2 013016-XXX SS 3/4 NPT Relay X X X2200GS4M11E2 013017-XXX SS M25 Relay X X X2200GA4N13E1 013018-XXX AL 3/4 NPT Relay/0-20 mA X X X2200GA4M13E1 013019-XXX AL M25 Relay/0-20 mA X X X2200GS4N13E1 013020-XXX SS 3/4 NPT Relay/0-20 mA X X X2200GS4M13E1 013021-XXX SS M25 Relay/0-20 mA X X X2200GA4N13E2 013022-XXX AL 3/4 NPT Relay/0-20 mA X X X2200GA4M13E2 013023-XXX AL M25 Relay/0-20 mA X X X2200GS4N13E2 013024-XXX SS 3/4 NPT Relay/0-20 mA X X X2200GS4M13E2 013025-XXX SS M25 Relay/0-20 mA X X X2200GA4N23E1 013026-XXX AL 3/4 NPT Rly/0-20/HART X X X2200GA4M23E1 013027-XXX AL M25 Rly/0-20/HART X X X2200GS4N23E1 013028-XXX SS 3/4 NPT Rly/0-20/HART X X X2200GS4M23E1 013029-XXX SS M25 Rly/0-20/HART X X X2200GA4N23E2 013030-XXX AL 3/4 NPT Rly/0-20/HART X X X2200GA4M23E2 013031-XXX AL M25 Rly/0-20/HART X X X2200GS4N23E2 013032-XXX SS 3/4 NPT Rly/0-20/HART X X X2200GS4M23E2 013033-XXX SS M25 Rly/0-20/HART X X X2200GA4N14E1 013034-XXX AL 3/4 NPT EQP X X X2200GA4M14E1 013035-XXX AL M25 EQP X X X2200GS4N14E1 013036-XXX SS 3/4 NPT EQP X X X2200GS4M14E1 013037-XXX SS M25 EQP X X X2200GA4N14E2 013038-XXX AL 3/4 NPT EQP X X X2200GA4M14E2 013039-XXX AL M25 EQP X X X2200GS4N14E2 013040-XXX SS 3/4 NPT EQP X X X2200GS4M14E2 013041-XXX SS M25 EQP X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg)   *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option. The EQP detectors are completely configurable using the configuration software and are shipped defaulted to the -001 setting. X2200G UV Flame Detector - CSA Model Part Number * Material Threads Output Div/Zone Ex d e  Div/Zone Ex d CSA X2200GA4N13C1 013098-001 AL 3/4 NPT Relay and 0-20 mA X X X2200GA4N13C2 013102-001 AL 3/4 NPT Relay and 0-20 mA X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg)   X2200GM UV Flame Detector - Moly In addition to having a Kr-85 free source tube, the X2200GM UV Flame Detector utilizes a molybdenum (moly) sensing element. Moly-based sensors have an increased spectral range of 1850 to 2650 angstroms, which is better suited for detecting substances with unusual chemistry, sulfur fires, and some black powders. Model Part Number * Material Threads Output Div/Zone Ex d e  Div/Zone Ex d FM/CSA/ ATEX/IECEx X2200GMA4N11E2 013042-003 AL 3/4 NPT Relay/0-20 mA X X2200GMA4N11E2 013042-013 AL 3/4 NPT Relay/0-20 mA X X2200GMA4M11E2 013043-003 AL M25 Relay/0-20 mA X X2200GMA4M11E2 013043-013 AL M25 Relay/0-20 mA X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg)   *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option. The EQP detectors are completely configurable using the S3 configuration software and are shipped defaulted to the -001 setting. X2200 UV Flame Detector / xWatch Camera Model Part Number * Material Threads Output Video FM/CSA X2200A3N33A2 009564-XXX AL 3/4 NPT Relay/0-20 NTSC X X2200A3M33A2 009565-XXX AL M25 Relay/0-20 NTSC X X2200S3N33A2 009566-XXX SS 3/4 NPT Relay/0-20 NTSC X X2200S3M33A2 009567-XXX SS M25 Relay/0-20 NTSC X X2200A3N43A2 009568-XXX AL 3/4 NPT Relay/0-20 PAL X X2200A3M43A2 009569-XXX AL M25 Relay/0-20 PAL X X2200S3N43A2 009570-XXX SS 3/4 NPT Relay/0-20 PAL X X2200S3M43A2 009571-XXX SS M25 Relay/0-20 PAL X X2200A3N34A2 009572-001 AL 3/4 NPT EQP NTSC X X2200A3M34A2 009573-001 AL M25 EQP NTSC X X2200S3N34A2 009574-001 SS 3/4 NPT EQP NTSC X X2200S3M34A2 009575-001 SS M25 EQP NTSC X X2200A3N44A2 009576-001 AL 3/4 NPT EQP PAL X X2200A3M44A2 009577-001 AL M25 EQP PAL X X2200S3N44A2 009578-001 SS 3/4 NPT EQP PAL X X2200S3M44A2 009579-001 SS M25 EQP PAL X Ship Weight: Aluminum = 9lb (4.1kg) Stainless Steel = 17.6lb (7.9kg)   *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option. The standard EQP detectors are completely configurable using the S3 software and are defaulted to the -001 setting. NOTES: 3 year warranty excludes xWatch camera. Models listed above come with a 2.3 mm lens on the camera, which emulates the 90° field of view of the flame detector. See section Flame F for additional lens options.

X7050 xWatch Explosion-Proof Surveillance Camera (Spec Sheet 90-1193) An explosion proof surveillance camera providing high-resolution color images of activity in the monitored area, which allows the capture and recording of fires and other activities on video. When a detector goes into alarm, the operator can immediately view the monitored area in real time and accurately assess the risk and location of the fire. The camera can be used with any video switcher or server for a live video feed and the output can be directed to a DVR or computer monitor. xWatch camera features: Easy connection to a video switcher using twisted pair wiring Existing wiring can be used in most applications FM, CSA, ATEX, and IECEx Three lens choices for field of view requirements Retrofit into a standard C7050 housing by simply replacing the tube module with the DE2020 camera module Three configurations are available: As a stand-alone device to perform typical CCTV functions Retrofitted into a C7050 Detector, replacing the UV tube module with the camera module Ordered as a combined unit with any of the X-Series Flame Detectors (see flame detector sections for specific models) - FM/CSA.  X7050 Model Matrix MODEL DESCRIPTION  X7050 xWatch Explosion-Proof Camera   TYPE MATERIAL A Aluminum (AL) S Stainless Steel (SS)   TYPE THREAD TYPE 1E 1/2" NPT 1F M20   TYPE VIDEO OUTPUT 50 NTSC 51 PAL   TYPE FIELD OF VIEW 1 Wide FOV (90°), 2.3mm Lens* 2 Normal FOV (50°), 4.3mm Lens 3 Narrow FOV (30°), 8.0mm Lens   TYPE APPROVALS W FM/CSA/ATEX/IECEx   TYPE CLASSIFICATION 1 Division/Zone Ex d *This lens emulates the 90° field of view to match the X-Series Flame Detectors.  X7050 xWatch Camera Model Part Number Material Threads FOV Output Ship Weight X7050A1E501W2 009580-001 AL 1/2 NPT 2.3mm NTSC 1.5 lb (0.7 kg) X7050A1E502W2 009580-002 AL 1/2 NPT 4.3mm NTSC 1.5 lb (0.7 kg) X7050A1E503W2 009580-003 AL 1/2 NPT 8.0mm NTSC 1.5 lb (0.7 kg) X7050A1F501W2 009581-001 AL M20 2.3mm NTSC 1.5 lb (0.7 kg) X7050A1F502W2 009581-002 AL M20 4.3mm NTSC 1.5 lb (0.7 kg) X7050A1F503W2 009581-003 AL M20 8.0mm NTSC 1.5 lb (0.7 kg) X7050S1E501W2 009582-001 SS 1/2 NPT 2.3mm NTSC 2.5 lb (1.2 kg) X7050S1E502W2 009582-002 SS 1/2 NPT 4.3mm NTSC 2.5 lb (1.2 kg) X7050S1E503W2 009582-003 SS 1/2 NPT 8.0mm NTSC 2.5 lb (1.2 kg) X7050S1F501W2 009583-001 SS M20 2.3mm NTSC 2.5 lb (1.2 kg) X7050S1F502W2 009583-002 SS M20 4.3mm NTSC 2.5 lb (1.2 kg) X7050S1F503W2 009583-003 SS M20 8.0mm NTSC 2.5 lb (1.2 kg) X7050A1E511W2 009584-001 AL 1/2 NPT 2.3mm PAL 1.5 lb (0.7 kg) X7050A1E512W2 009584-002 AL 1/2 NPT 4.3mm PAL 1.5 lb (0.7 kg) X7050A1E513W2 009584-003 AL 1/2 NPT 8.0mm PAL 1.5 lb (0.7 kg) X7050A1F511W2 009585-001 AL M20 2.3mm PAL 1.5 lb (0.7 kg) X7050A1F512W2 009585-002 AL M20 4.3mm PAL 1.5 lb (0.7 kg) X7050A1F513W2 009585-003 AL M20 8.0mm PAL 1.5 lb (0.7 kg) X7050S1E511W2 009586-001 SS 1/2 NPT 2.3mm PAL 2.5 lb (1.2 kg) X7050S1E512W2 009586-002 SS 1/2 NPT 4.3mm PAL 2.5 lb (1.2 kg) X7050S1E513W2 009586-003 SS 1/2 NPT 8.0mm PAL 2.5 lb (1.2 kg) X7050S1F511W2 009587-001 SS M20 2.3mm PAL 2.5 lb (1.2 kg) X7050S1F512W2 009587-002 SS M20 4.3mm PAL 2.5 lb (1.2 kg) X7050S1F513W2 009587-003 SS M20 8.0mm PAL 2.5 lb (1.2 kg)   X7050 Spare Camera Modules Model Part Number FOV Output Ship Weight DE2020N 009448-003 2.3mm NTSC 5 oz. (0.14 kg) DE2020P 009448-004 2.3mm PAL 5 oz. (0.14 kg) DE2022N 009448-005 4.3mm NTSC 5 oz. (0.14 kg) DE2022P 009448-006 4.3mm PAL 5 oz. (0.14 kg) DE2023N 009448-007 8.0mm NTSC 5 oz. (0.14 kg) DE2023P 009448-008 8.0mm PAL 5 oz. (0.14 kg)   X7050 Mounting Hardware Model Part Number Material Ship Weight Q9001B1175 002099-003 AL 0.5 lb (0.23 kg) Q9001H8001 004404-002 SS 1 lb (0.45 kg)   X7050 Accessories Part Number Description Ship Weight 000499-132 Screw Terminal Balun, Active, converts single composite CCTV video signal from CAT-5 twisted pair wiring to BNC coaxial connector on DVR or video multiplexer, active type, suitable for distances over 750 ft (0.23 km) <1 lb (<0.45 kg) 000499-073 Screw Terminal Balun, Passive, converts single composite CCTV video signal from CAT-5 twisted pair wiring to BNC coaxial connector on DVR or video multiplexer, passive type, suitable for distances up to 750 ft (0.23 km) <1 lb (<0.45 kg)

EQ2200UVHT (Manual: 95-8570) combined with the C7050 Detector (Manual: 95-8214) on an EQP (or as a replacement on an older EQ system) provides fast, reliable flame detection in a wide variety of applications. The detector has the Automatic oi (optical integrity) feature, providing a continuous check of detector optical surfaces, detector sensitivity, and electronic circuitry of the detector/controller system. Not recommended for applications where welding or lightning may be present. For large fixed installations only. Replaceable tube module External Automatic oi Internal Automatic oi Standard temperature option High temperature option, 125°C continuous duty Variable sensitivities available to match hazard FM, CSA, ATEX, CE C7050 Model Matrix MODEL DESCRIPTION C7050B Controller Based UV Flame Detector   TYPE MATERIAL A Aluminum S Stainless Steel (316)   TYPE 6 1 Port   TYPE THREAD TYPE E 1/2" NPT F M20   TYPE OUTPUTS 4 Pulse (Standard)   TYPE TUBE MODULE OPTION E  DE1888K3 (High Temperature for UVHT)   TYPE OPTIONS 1H Operating Temperature 125° C   TYPE APPROVAL TYPE 1 Explosion-Proof   TYPE APPROVALS E ATEX/IECEx A FM/CSA   C7050B Ultraviolet Flame Detectors (ATEX/IECEx) Model Part Number Enclosure Material Conduit Entry Tube Module ATEX/ IECEx Ship Weight  C7050BS6F4E1H1E 006899-040 SS M20 DE1888K3 X 2.2 lb (1.0 kg) C7050 LENS CAP/BODY 008054-001 SS N/A N/A X 1 lb (0.45 kg) High temperature rating - continuous duty at 125° Celsius, for environments that normally exceed 75° Celsius operation. C7050B Ultraviolet Flame Detectors (FM/CSA) Model Part Number Enclosure Material Conduit Entry Tube Module FM/CSA Ship Weight C7050BA6E4E1H1A 006899-037 AL 1/2" NPT DE1888K3 X 1.2 lb (0.6 kg) C7050BS6E4E1H1A 006899-038 SS 1/2" NPT DE1888K3 X 2.2 lb (1.0 kg) C7050BA6F4E1H1A 006899-039 AL M20 DE1888K3 X 1.2 lb (0.6 kg) C7050 LENS CAP/BODY 004907-021 AL N/A N/A X <1 lb (<0.45 kg) C7050 LENS CAP/BODY 004907-022 SS N/A N/A X 1 lb (0.45 kg) High temperature rating - continuous duty at 125° Celsius, for environments that normally exceed 75° Celsius operation. EQP UVHT Electronic Module* Model Part Number Enclosure Material Conduit Entry Tube Module FM/CSA/ ATEX/ IECEx Ship Weight EQ2253UVHT* 007082-001 AL 3/4" NPT N/A X 4.0 lb (1.8 kg) EQ2207UVHT* 007082-002 AL M25/M20 N/A X 4.0 lb (1.8 kg) EQ2263UVHT* 007082-003 SS 3/4" NPT N/A X 9.5 lb (4.3 kg) EQ2217UVHT* 007082-004 SS M25/M20 N/A X 9.5 lb (4.3 kg) DE6598-002 006598-002 Module only 2.5 lb (1.2 kg) *One (1) Electronic Module (EQxxxxUVHT) is required for use with each C7050B Detector

EQ3700 DCIO Input/Output Module (Spec Sheet: 90-1149) The 8 Channel DC I/O Module is specially designed to expand the Input and Output (I/O) capability of the Det-Tronics Eagle Quantum Premier System. The unit is designed to provide continuous and automated fire/gas protection while ensuring system operation through continuous supervision of system I/O and signaling line circuit (SLC). The DCIO module provides eight channels of configurable I/O points that can be programmed for supervised or unsupervised operation. Each input point can accept fire detection devices such as heat, smoke, or unitized flame detectors. Each output point can be configured for signaling or releasing output operation. Each channel on the module is provided with individual indicators for active and fault conditions. Monitors eight independent I/O channels IDC Class B wiring Class 1 Div. 2 locations combined with Zone 2 rated devices Type N Individual channels are configurable as an Input or Output Individual point Style is configurable as a supervised or an unsupervised point Individual point Type is configurable for alarm/supervisory/other input styles, notification/releasing/dry contact output Meets the requirements of NFPA 72 Panel or DIN rail mounting EQ3700 DCIO Model Matrix MODEL DESCRIPTION EQ3700 8 Channel Discrete Input/Output Module (DCIO)   TYPE MOUNTING OPTION D Din Rail P Panel   TYPE APPROVALS R VNIIPO/VNIIFTRI (RUSSIA) W FM/CSA/ATEX/IECEx   EQ3700 DCIO Module Model Part Number Material FM/CSA/ ATEX/IECEx Ship Weight EQ3700PW 007371-002 AL X 1.0 lb (0.45 kg) EQ3700DW 007371-003 AL X 2.0 lb (0.90 kg)

EQ3730 EDIO Enhanced Discrete Input/Output Module (Spec Sheet: 90-1189) The 8 Channel EDIO Module is specially designed to expand the input and output (I/O) capability of the Det-Tronics Eagle Quantum Premier System. The unit is designed to provide continuous and automated fire/gas protection while ensuring system operation through continuous supervision of system I/O and signaling line circuit (SLC). The EDIO module provides eight channels of configurable input or output points that can be configured as input/output, two-wire smoke/heat detector, Class A input, Class A output. Each input point can accept fire detection devices such as heat, smoke, or unitized flame detectors. Each output point can be configured for signaling or releasing output operation. Each channel on the module is provided with individual indicators for active and fault conditions. Monitors eight independent I/O channels IDC Class A or B wiring Class 1 Div. 2 locations combined with Zone 2 rated devices Type N Individual channels are configurable as an input/output/two-wire smoke/heat detectors/ Class A input/Class A output A smoke/heat channel can support up to 15 two-wire smoke and heat devices per channel For Class A input and output wiring two channels are required per Class A circuit Models with SIL 2 certification Individual point style is configurable as a supervised or an unsupervised point User configurable supervision for opens and/or shorts Individual point type is configurable for alarm/supervisory/other input styles, notification/releasing/dry contact output Exceeds the requirements of NFPA 72 Panel or DIN rail mounting EQ3730 EDIO Model Matrix MODEL DESCRIPTION EQ3730 8 Channel Enhanced Discrete Input/Output Module (EDIO)   TYPE MOUNTING OPTION D DIN Rail P Panel   TYPE APPROVALS R VNIIPO/VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx W FM/CSA/ATEX/IECEx *Type Approvals can use one or more letters to designate the approvals of the product. EQ3730 EDIO Module - SIL 2 Model Part Number Material SIL/FM/CSA/ATEX/IECEx Ship Weight EQ3730PT 009174-012 AL X 1.0 lb (0.45 kg) EQ3730DT 009174-013 AL X 2.0 lb (0.90 kg)   EQ3730 EDIO Module Model Part Number Material FM/CSA/ATEX/IECEx Ship Weight EQ3730PW 009174-002 AL X 1.0 lb (0.45 kg) EQ3730DW 009174-003 AL X 2.0 lb (0.90 kg)

EQP21XXPS Power Supplies are used in pairs where the primary source of input supply is connected to one and the secondary source is connected to the other. A maximum of eight power supplies operated in parallel can be connected to each input supply. Both the primary and secondary sets must be individually capable of operating the system without the other supply. The secondary source is required to be continuously powered. EQP21XX Power Supply Model Part Number Description Ship Weight EQP2120PS-B 010988-001* EQP2120PS-B 20A 120/220V PANEL 3.7 lb (1.7 kg) EQP2120PS  010988-002 EQP2120PS 20A 120/220V DIN 3.7 lb (1.7 kg) *For FM/USCG approved system   EQP2410 Converter serves as a DC voltage regulator for the secondary/back-up power supply source. It converts grounded DC input source into floating DC output power for ground fault monitoring capability. EQP2410 Converter Model Part Number Description Ship Weight EQP2410PS-P 010892-001* 10A 24VDC CONVERTER, PANEL 2.7 lb (1.2 kg) EQP2410PS 010892-002 10A 24VDC CONVERTER, DIN 2.7 lb (1.2 kg) *For FM/USCG approved system   Diode Module Model Part Number Description Ship Weight N/A 009934-001* DIODE REDUNDANCY MOD W/MTG BKT 2.0 lb (0.90 kg) N/A 009934-002 DIODE REDUNDANCY MOD DIN RAIL 2.0 lb (0.90 kg) *For FM/USCG approved system   EQ2220GFM Ground Fault Monitor (Spec Sheet: 90-1134) provides ground fault monitoring in a system that includes reliable dual isolated 24 Vdc power. The output from the ground fault monitor is a contact closure in the presence of a ground fault. The ground fault monitor is DIN rail mountable and is intended to be mounted in the same enclosure as the controller. Ground Fault Monitor (For use with power supplies above) Model Part Number Description Ship Weight EQ2220GFM 007941-001 Ground Fault Monitor 0.5 lb (0.2 kg) EQ2220GFMR 007941-901 Ground Fault Monitor 0.5 lb (0.2 kg)     EQ3900RPS (Manual: 95-8745) The EQ3900RPS Remote Power Supply is an industrial power supply that accepts two independent AC inputs and produces 24 Vdc with up to 18 amperes output current. The EQ3900RPS remote power supply can be configured with various numbers of 24 Vdc power outputs, fuse monitoring, and status indicators. There are two designs for the EQ3900RPS depending upon where they will be located. One model is intended for use in hazardous locations, with certification for Class I, Division 1 and Class I, Division 2 per the National Electrical Code, and one model for ordinary locations.   MODEL DESCRIPTION EQ3900RPS Remote LON-based Power Supply   TYPE ENCLOSURE E Explosion-proof (Class I, Division 1) G Ordinary Location   TYPE 24 VDC POWER OUTPUTS (Notes 1 & 2) 1 1 24Vdc Power Output (18 Amp Fuses) 2 2 24Vdc Power Outputs (9 Amp Fuses) 3 3 24Vdc Power Outputs (6 Amp Fuses)   TYPE FUSE MONITORING (Notes 2 & 3) 0 0 Fuse Monitoring 1 1 Fuse Monitoring (Power Outputs: #1) 2 2 Fuse Monitoring (Power Outputs: #1& #2) 3 3 Fuse Monitoring (Power Outputs: #1,#2,& #3)   TYPE INDICATIONS (More than one can be chosen) (Notes 3 & 5) N No Indicator or Operator A Power Present Indicator B Power Trouble Indicator C Ground Fault Indicator D Ground Fault Test Operator   TYPE WINDOW N No Window W Window NOTES: 1. Maximum total current draw = 18 amperes. All power outputs have same fuse rating. 2. Fuse monitoring by EQP only. No local indication. 3. Consult factory if other configuration are desired. 4. Consult factory for size and number of conduit entries. 5. No ingress rating if operators are included. EQ3900 RPS Power Supply Description Part Number Material Entries Div 1 Class 1 FM/CSA EQ3900RPS 000525-XXX AL Up to 12 X X EQ3900RPS 000525-XXX SS Up to 12 X

FlexVu UD10-DCU Universal Display (Spec Sheet 90-1200) is recommended for applications that require a gas detector with digital readout of detected gas levels. Its LON interface board makes the FlexVu UD10 compatible with Eagle Quantum Premier systems by digitizing the 4-20 mA analog signal from the attached sensor/transmitter and transmitting the value as a process variable over the LON to the EQP controller. The UD10 is designed for use with a variety of Det-Tronics gas sensors for combustible and toxic detection, GT3000 and C7064E. When used with the EQP controller, it meets all gas performance standards. Compliance to ANSI/ISA-12.13.01-2000 performance standard Compliance to ISA-92.0.01 Part 1 performance standard, and EN50104 for oxygen depletion Performance certified to FM 6310/6320, CSA 22.2 #152, ATEX EN60079-29-1, and IEC60079-29-1 Division Approval Ratings: FM and CSA Zone Approval Ratings: FM, CSA, ATEX, and IECEx Accepts 4-20 mA input from a variety of detection devices (gas, flame, pressure, flow, etc.) Compatible with FlexSonic Acoustic leak detector AC100/ATX10, providing spectrum display and configuration setup menus Non-intrusive menu allows device calibration without de-classifying the hazardous area Continuously displays gas level, gas type, and units measured Alarm setpoints adjustable via network Data logger for event time and date stamping Heated and backlit display IP66 rated Emulates the EQ22xxDCU for direct replacement Replaces EQ2200 DCUEX for direct replacement FlexVu UD10 DCU Model Matrix MODEL DESCRIPTION UD10 Universal Display Unit   TYPE MATERIAL A Aluminum S Stainless Steel (316)   TYPE THREAD TYPE 5M 5 Port, Metric M25 5N 5 Port, 3/4" NPT   TYPE OUTPUTS 28 EQP - DCU Emulator   TYPE APPROVALS B INMETRO (BRAZIL) R VNIIFTRI (RUSSIA) W FM/CSA/ATEX/IECEx   TYPE CLASSIFICATION (Div/Zone) 2 Ex d (Flameproof)   TYPE OPTIONAL CONDITIONING BOARD C CGS   FlexVu UD10-DCU Universal Display Model Part Number Material Threads EQP-DCU Emulator Cond. Board FM/CSA/ ATEX/IECEx UD10A5M28W2 010765-005 AL M25 X X UD10A5N28W2 010765-006 AL 3/4 NPT X X UD10S5M28W2 010765-007 316 SS M25 X X UD10S5N28W2 010765-008 316 SS 3/4 NPT X X Ship Weight: Aluminum = 4.2lb (1.9kg) Stainless Steel = 10.5lb (4.8kg)   FlexVu UD10-DCU Universal Display - CGS Model Part Number Material Threads EQP-DCU Emulator Cond. Board FM/CSA/ ATEX/IECEx UD10A5M28W2C 010254-005 AL M25 X CGS X UD10A5N28W2C 010254-006 AL 3/4 NPT X CGS X UD10S5M28W2C 010254-007 316 SS M25 X CGS X UD10S5N28W2C 010254-008 316 SS 3/4 NPT X CGS X Ship Weight: Aluminum = 4.2lb (1.9kg) Stainless Steel = 10.5lb (4.8kg)   FlexVu UD10 Spare Module Part Number Description Output Ship Weight 010535-001 UD10 Display Module EQP-DCU 1 lb (0.45 kg)   FlexVu UD10 Accessories Part Number Description Ship Weight 009700-001 Magnetic Tool <1 lb (0.45 kg) 014019-001 Gas Inspector 11 CD <1 lb (0.45 kg) 014020-001 W6300G1006 Gas Inspector 11 Kit (includes CD) <1 lb (0.45 kg) 102988-002 Plug, 5.0mm, 6 Position - P2 <1 lb (0.45 kg) 102988-026 Plug, 5.0mm, 3 Position - P1 (J10, CGS) <1 lb (0.45 kg) 102988-028 Plug, 5.0mm, 5 Position - (J3, CGS) <1 lb (0.45 kg) 103726-002 Plug, 3.5mm, 3 Position - J2 <1 lb (0.45 kg) 103726-004 Plug, 3.5mm, 5 Position - J3 <1 lb (0.45 kg) 103726-011 Plug, 3.5mm, 12 Position - J4 <1 lb (0.45 kg)   Stop Plugs and Reducers Part Number Description Ship Weight 101197-001* Stop Plug, 3/4" NPT, AL <1 lb (<0.45 kg) 101197-004* Stop Plug, 3/4" NPT, SS <1 lb (<0.45 kg) 101197-005 Stop Plug, M25, AL, IP66 <1 lb (<0.45 kg) 101197-003 Stop Plug, M25, SS, IP66 3.25 lb (1.5 kg) 010816-001* Stop Plug, 20 Pack, 3/4"NPT, AL 1 lb (0.45 kg) 010817-001* Stop Plug, 20 Pack, 3/4"NPT, SS 2 lb (0.9 kg) 010818-001 Stop Plug, 20 Pack, M25, AL,IP66 1.5 lb (0.7 kg) 010819-001 Stop Plug, 20 Pack, M25, SS,IP66 3.25 lb (1.5 kg) 102804-001 Reducer, M25 to M20, AL <1 lb (<0.45 kg) 102804-003 Reducer, M25 to M20, SS <1 lb (<0.45 kg) *NEMA/TYPE 4 and IP66 rating requires addition of Teflon tape.

Class 1, Division 1 Part Number Description Ship Weight 000115-316 MCP, PB, 3XM20, Red, Duty 3.3K Series, 10K EOL 5.5 lb (2.5 kg) 000115-317 MCP, PB, 3XM20, Red, Duty 1.5K Series, 2.4K EOL 5.5 lb (2.5 kg) 000115-333 MCP, BG, ATEX, IECEx, Tag, Red 10K EOL, 1K Series, DP 5.5 lb (2.5 kg) 000115-195 Manual Pull Station, push button with lift flap (dual action), SPST contact, surface mount, alloy housing painted red, key for reset, 1/2” NPT bottom, includes "FIRE-PUSH BUTTON" label, Class 1, Division 1, Groups C-D, NEMA 4X, UL 5.5 lb (2.5 kg) 000115-003 Manual Pull station, Dual Action Lift and Pull Ring, 3/4" Entry, Class 1, Division 1, SPDT Contacts, Groups C & D, Aluminum material, UL, ULC, CSA, CSFM Listed, Red Finish 5.5 lb (2.5 kg) 000115-040 Manual Pull Station, pull ring with lift flap (dual action), SPDT contact, surface mount, Aluminum housing, two 3/4” NPT (F) entries, Class 1, Division 1, Groups B, C, & D, NEMA 4/7/9, ULC, Red Finish 5.5 lb (2.5 kg) 000115-010 Manual Pull Station, Single Action (Dual if used with Lift Flap), DPDT Contacts, Aluminum material, Class 1, Division 1, Groups B, C, & D, NEMA 4X, UL Listed, Red Finish, Model B-9 3.5 lb (1.6 kg) 000210-709 Lift Flap for B-9, "CO2 Release" label 0.5 lb (.23 kg) 000115-011 Lift Flap for B-9, "FIRE ALARM" label 0.5 lb (.23 kg) 000115-012 Lift Flap for B-9, "FIRE SYSTEM RELEASE" label 0.5 lb (.23 kg) 000115-027 Lift Flap for B-9, "FM-200 Release" label 0.5 lb (.23 kg)   Class 1, Division 2 Part Number Description Ship Weight 000115-006  MCP Push Button, 24V, Red, IECEx Call Point  2.7 lb (1.3 kg) 000115-278  MCP, PB, Single Switch, Red, ATEX Call Point 2.7 lb (1.3 kg) 000115-279 MCP, PB, Single Switch, YEL, ATEX Call Point 2.7 lb (1.3 kg) 000115-053 Manual Pull Station, pushbutton type with lift flap (dual action), Class 1, Division 2, Groups A, B, C, & D, NEMA 4X, SPST contact, surface mount, GRP housing painted red, key for reset, two 1/2” NPT (F) entries, includes "FIRE ALARM" label and 10K EOL resistor, UL 2.7 lb (1.3 kg) 000115-054  Manual Call Station, break glass type, SPST contact, Class 1, Division 2, Groups A, B, C, & D, NEMA 4X, SPST contact, surface mount, GRP housing painted red, key for test, two 1/2” NPT (F) entries, includes "FIRE BREAK GLASS" label, no EOL resistor, UL 2.7 lb (1.3 kg)   General Purpose Part Number Description Ship Weight 000515-012 Manual Pull Station, Dual Action w/ Labels, DPST Contacts, Red Finish, Model 3300 1.2 (.6 kg) 000115-051 Manual Pull Station, Dual Action w/ Labels, SPST Contacts, Red Finish, Model 3300 1.2 (.6 kg) 000515-013 Weatherproof Backbox for 3300 Pull Station 1 lb (.45 kg) 000515-014 Indoor Backbox for 3300 Pull Station 0.5 lb (.23 kg)   Accessories Part Number Description Ship Weight  000115-028 Glass Breakrods for B-9 (10 Pk) 0.5 lb (.23 kg) 000515-015 Glass Breakrods for 3300 Pull Station (12 Pk) 0.5 lb (.23 kg) 000515-016 Spare Key for 3300 Pull Station 0.5 lb (.23 kg) 000106-108 EOL Resistor, 10K Ohm <1 lb (<.45 kg) 000115-334 Spare Break Glass, E2S 50=1 EA Pack of 50 2 lb (.9 kg)

Q5016 Duct Mount Accessory (Instruction Manual: 95-8752) is used with the U5015 explosion-proof smoke detector to detect smoke within air handling duct work. Mounted to the exterior of the duct wall, the Q5016 utilizes the differential pressure created between the inlet (sampling) and outlet (exhaust) tubes to drive a continuous air sample through the measurement chamber. The Q5016 is designed for hazardous industrial and commercial applications. Also available in red epoxy painted option. Air Velocity Range of 300 to 4000 ft/min (91.4 to 1219 meters/min) NEMA 250 Type 4X All aluminum surfaces are coated with chemical film per MIL-DTL-5541 TYPE II Class 1A and ISO 8081 Q5016 Duct Mount Accessory Model Part Number Inlet Tube Length Q5016-1 013901-001 1 ft (0.3 m) Q5016-3 013901-003 3 ft (0.9 m) Q5016-6 013901-006 6 ft (1.8 m) Q5016-10 013901-010 10 ft (3.1 m) Ship Weight: 14.2lb (6.5kg)   Q5016 Duct Mount Accessory (Instruction Manual: 95-8752) Prior to painting, all aluminum surfaces are coated with chemical film per MIL-DTL-5541 TYPE II Class 1A and ISO 8081. The Q5016 Duct Mount Accessory is painted with a deep-red epoxy. Qualification Tests Per ISO 12944-6, Category C5-I and C5-M. Air Velocity Range of 300 to 4000 ft/min (91.4 to 1219 meters/min) NEMA 250 Type 4X All aluminum surfaces are coated with chemical film per MIL-DTL-5541 TYPE II Class 1A and ISO 8081   Q5016 Duct Mount Accessory - Red Painted Model Part Number Inlet Tube Length Q5016-1-RED 013901-011 1 ft (0.3 m)  Q5016-3-RED 013901-013 3 ft (0.9 m)  Q5016-6-RED 013901-016 6 ft (1.8 m)  Q5016-10-RED 013901-020 10 ft (3.1 m) Ship Weight: 14.2lb (6.5kg)   Q5016 Duct Mount Accessory Spare Parts Model Part Number Q5016 inlet tube 1 ft (0.3 m) w/stop 013660-001 Q5016 inlet tube 3 ft (0.9 m) w/stop 013660-003 Q5016 inlet tube 6 ft (1.8 m) w/stop 013660-006 Q5016 inlet tube 10 ft (3.0 m) w/stop 013660-010 Q5016 outlet tube,1 ft 013628-001 Inlet tube stop plug 013653-001 Differential pressure adaptors (2x) 013655-001 Chamber gasket 013626-001 Locknut, serrated flange 400587-001

W8066 UV Test Lamp (Spec Sheet: 90-1055) is used for on-site testing of all UV detector types. It replaces W866. Consists of a UV lamp powered by a replaceable 9 volt battery and is contained in a plastic enclosure. Available as intrinsically safe. “G” version available Kr85 Free.   W867 Explosion-Proof UVIR Test Lamp (Spec Sheet: 90-1055) is used for on-site testing of UV, single frequency IR, or UVIR detectors. Consists of a high-energy broad band lamp powered by rechargeable batteries and is contained in an explosion-proof non-ferrous metallic enclosure.   W8067 Test Lamp (Manual: 95-8626) for on-site testing of the UVIR and single frequency IR detectors. NON EXPLOSION-PROOF - CANNOT BE USED IN HAZARDOUS LOCATIONS.   W8066 UV Test Lamp Model/Description Part Number FM CSA Ship Weight W8066A1001 004483-001 X X 1.5 lb (0.7 kg) W8066G1001 Kr85-free 004483-002 1.5 lb (0.7 kg) W8066A Replacement Bulb 002405-002 <1 lb (<0.45 kg) W8066G Replacement Bulb 002405-004 <1 lb (<0.45 kg) Screw-on cap, red for Lens 004520-003 1.5 lb (0.7 kg) Window, Fused Silica 004648-001 1.5 lb (0.7 kg) Seal, Pushbutton Boot 102219-001 1.5 lb (0.7 kg)   W867 Explosion-Proof UVIR Test Lamp Model/Description Part Number FM Ship Weight W867C3004 Test Lamp 110/220 VAC* 004000-006 X 14 lb (6.2 kg) Universal Battery Charger for W867 and W8067, 110/220 VAC 009997-001 1 lb (0.4 kg) Battery Charger, W8673001, 120 VAC 009117-001 1 lb (0.4 kg) W867 Battery Pack Kit 004611-002 7 lb (3.2 kg) W867 Bulb Replacement Assembly 010543-001 <1 lb (<0.4 kg) *Includes Universal Battery Charger W8067 Test Lamp Model/Description Part Number Ship Weight W8067S1004 006439-004 2.0 lb (0.95 kg)  Universal Battery Charger for W867 and W8067, 110/220 VAC 009997-001 <1 lb (<0.4 kg)  W8067S Battery, 6V (2 required for 12V operation) 103855-001 <1 lb (<0.4 kg) W8067S Battery, 12V 103937-001 <1 lb (<0.4 kg)

X3301 Multispectrum Infrared Flame Detector (Spec Sheet: 90-1218, 90-1219) establishes the benchmark in hydrocarbon based fire detection performance and false alarm rejection. The detector utilizes advanced signal processing algorithms supported by an embedded 32-bit microprocessor to provide continuous protection in the presence of false alarm sources and environments with infrared radiation present. Multiple sensitivity and output options are available enabling the X3301 to be used in a variety of applications such as offshore oil/gas platforms. Standard outputs include fire alarm, auxiliary alarm and fault relays, with RS-485 Modbus. Optional 0-20 mA, HART, Pulse, or Eagle Quantum Premier outputs are also available. Hangar Mode processing option provides an increased verification time to a sustained fire while maintaining extended detection range capability. Hangar mode provides additional false alarm rejection capability for applications that contain temporary sources of alarm. Model options available that are optimized for Aircraft Hangars, Turbines, and Automotive Paint Spray Booth applications. Models available with SIL 2 certification Increased detection range compared to traditional detectors Third-party certified performance to multiple fuel types Terminal block allows for Class X Pathway Designation per NFPA 72 125 feet (30.5 m) of detection range on axis for methane Microprocessor controlled heated optics enable optimal performance in adverse environments Data logger for event time and date stamping Automatic oi (optical integrity) continuously verifies each sensors ability to detect fire Calibrated manual testing/magnetic oi, no test lamp required Four conduit entries for easy installation Division Approval Ratings: FM and CSA Zone Approval Ratings: FM, CSA, ATEX, and IECEx DNV, MED, ULC, USCG EN 54 part 10 certified by VdS, LPCB Meets Construction Product Directive Optional HART output, AMS aware, and FDT/DTM capable Models available with integral Explosion-proof camera option (xWatch) Tricolor LED on detector faceplate indicates detector status condition Automotive Model meets NFPA 33 response requirements for under 0.5 seconds   X3301 Model Matrix MODEL DESCRIPTION X3301 Multispectrum IR Flame Detector   TYPE MATERIAL A Aluminum (AL) S Stainless Steel (SS)   TYPE THREAD TYPE 3M 3 Port, M25* 3N 3 Port, 3/4" NPT* 4M 4 Port, M25 4N 4 Port, 3/4" NPT   TYPE OUTPUTS 11 Relay 13 Relay and 0-20 mA 14 Eagle Quantum Premier (EQP) 15 Relay and Pulse 16 Addressable Module Only (third-party type) 21 Relay - Automotive 22 Eagle Quantum Premier - Automotive 23† HART, Relay, and 0-20 mA 33 Relay and 0-20 mA/ NTSC (xWatch) 34 Eagle Quantum Premier / NTSC (xWatch) 43 Relay and 0-20 mA / PAL (xWatch) 44 Eagle Quantum Premier / PAL (xWatch)   *3-port models only available with output types 33, 34, 43, and 44 (xWatch) † Type 23 Output - When HART output chosen detector does not have RS-485 communication available. ‡Type Approvals can use one or more letters to designate the approvals of the product. § ULC approval applies to output types 11, 13, 15, 21, and 23, 33, 34 Certified by QPS Evaluation Services, Inc. §§VdS approval only applies to output types 11, 13, and 14 Table A1 - X3301 Software Part Number Configuration Matrix Dash Sensitivity Alarm Relay Aux Relay Fault Relay Special -001 Medium De-energized Non-latching Energized Non-latching Energized Non-latching None -002 Very High De-energized Non-latching Energized Non-latching Energized Non-latching None -004* Low De-energized Non-latching Energized Non-latching Energized Non-latching 3 min oi 10 fails to fault -005† Medium De-energized Non-latching De-energized Non-latching Energized Non-latching Automotive -010* T-Low De-energized Non-latching Energized Non-latching Energized Non-latching None -034 Medium De-energized Non-Latching De-energized Non-Latching Energized Non-latching Hangar‡ -035 Very High De-energized Non-Latching De-energized Non-Latching Energized Non-latching Hangar‡ *Compatible with EQP Controller firmware 11.08 and later. †Available only on type 21 & 22 (Automotive) output. ‡See 95-8735 Hangar Mode Addendum and Consult Factory for Recommendations NOTE: The X3301 window heaters are set to 100% as a default but can be configured from 0-100% with the Enhanced Flame Inspector. Please refer to section E.3 for more details. Application Guidelines The following criteria should be considered when choosing a sensitivity level for the intended application: Potential for interference from IR emitting sources Speed of response based on fuel type and fire size Distance between the hazard and the flame detector These are typical industry application settings. They may not be applicable to all installations. Contact factory for additional application guidance. NOTE: Latching relays cannot be used in voted systems. Offshore 001, 004 Turbine 010, 001 Compressor 001, 010 Hangar 034 or 035 Petroleum Loading Racks 034 Automotive 005 High IR Backgrounds 004, 010, 034   X3301 Multispectrum Infrared Flame Detector - SIL 2 Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d SIL/FM/CSA/ ATEX/IECEx X3301A4N11T1 028234-XXX AL 3/4 NPT Relay X X X3301A4M11T1 028235-XXX AL M25 Relay X X X3301S4N11T1 028236-XXX SS 3/4 NPT Relay X X X3301S4M11T1 028237-XXX SS M25 Relay X X X3301A4N11T2 028238-XXX AL 3/4 NPT Relay X X X3301A4M11T2 028239-XXX AL M25 Relay X X X3301S4N11T2 028240-XXX SS 3/4 NPT Relay X X X3301S4M11T2 028241-XXX SS M25 Relay X X X3301A4N13T1 028258-XXX AL 3/4 NPT Relay/0-20 mA X X X3301A4M13T1 028259-XXX AL M25 Relay/0-20 mA X X X3301S4N13T1 028260-XXX SS 3/4 NPT Relay/0-20 mA X X X3301S4M13T1 028261-XXX SS M25 Relay/0-20 mA X X X3301A4N13T2 028270-XXX AL 3/4 NPT Relay/0-20 mA X X X3301A4M13T2 028271-XXX AL M25 Relay/0-20 mA X X X3301S4N13T2 028272-XXX SS 3/4 NPT Relay/0-20 mA X X X3301S4M13T2 028273-XXX SS M25 Relay/0-20 mA X X X3301A4N23T1 028244-XXX AL 3/4 NPT Rly/0-20/HART X X X3301A4M23T1 028245-XXX AL M25 Rly/0-20/HART X X X3301S4N23T1 028246-XXX SS 3/4 NPT Rly/0-20/HART X X X3301S4M23T1 028247-XXX SS M25 Rly/0-20/HART X X X3301A4N23T2 028248-XXX AL 3/4 NPT Rly/0-20/HART X X X3301A4M23T2 028249-XXX AL M25 Rly/0-20/HART X X X3301S4N23T2 028250-XXX SS 3/4 NPT Rly/0-20/HART X X X3301S4M23T2 028251-XXX SS M25 Rly/0-20/HART X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 13.8lb (6.3kg)   X3301 Multispectrum Infrared Flame Detector - SIL 2 EQP Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d SIL/FM/CSA/ ATEX/IECEx X3301A4N14T1 028262-001 AL 3/4 NPT EQP X X X3301A4M14T1 028263-001 AL M25 EQP X X X3301S4N14T1 028264-001 SS 3/4 NPT EQP X X X3301S4M14T1 028265-001 SS M25 EQP X X X3301A4N14T2 028274-001 AL 3/4 NPT EQP X X X3301A4M14T2 028275-001 AL M25 EQP X X X3301S4N14T2 028276-001 SS 3/4 NPT EQP X X X3301S4M14T2 028277-001 SS M25 EQP X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 13.8lb (6.3kg)   X3301 Multispectrum Infrared Flame Detector Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d SIL/FM/CSA/ ATEX/IECEx X3301A4N11W1 028100-XXX AL 3/4 NPT Relay X X X3301A4M11W1 028101-XXX AL M25 Relay X X X3301S4N11W1 028102-XXX SS 3/4 NPT Relay X X X3301S4M11W1 028103-XXX SS M25 Relay X X X33014AN11W2 028104-XXX AL 3/4 NPT Relay X X X3301A4M11W2 028105-XXX AL M25 Relay X X X3301S4N11W2 028106-XXX SS 3/4 NPT Relay X X X3301S4M11W2 028107-XXX SS M25 Relay X X X3301A4N15W1 028112-XXX AL 3/4 NPT Pulse/Relay X X X3301A4M15W1 028113-XXX AL M25 Pulse/Relay X X X3301S4N15W1 028114-XXX SS 3/4 NPT Pulse/Relay X X X3301S4M15W1 028115-XXX SS M25 Pulse/Relay X X X3301A4N15W2 028132-XXX AL 3/4 NPT Pulse/Relay X X X3301A4M15W2 028133-XXX AL M25 Pulse/Relay X X X3301S4N15W2 028134-XXX SS 3/4 NPT Pulse/Relay X X X3301S4M15W2 028135-XXX SS M25 Pulse/Relay X X X3301A4N21W2 028118-005 AL 3/4 NPT Automotive X X X3301A4M21W2 028119-005 AL M25 Automotive X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 13.8lb (6.3kg)   X3301 Multispectrum Infrared Flame Detector - EQP Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d FM/CSA/ ATEX/IECEx X3301A4N14W1 028124-001 AL 3/4 NPT EQP X X X3301A4M14W1 028125-001 AL M25 EQP X X X3301S4N14W1 028126-001 SS 3/4 NPT EQP X X X3301S4M14W1 028127-001 SS M25 EQP X X X3301A4N14W2 028128-001 AL 3/4 NPT EQP X X X3301A4M14W2 028129-001 AL M25 EQP X X X3301S4N14W2 028130-001 SS 3/4 NPT EQP X X X3301S4M14W2 028131-001 SS M25 EQP X X X3301A4N14W1 028124-034 AL 3/4 NPT EQP/Hangar X X X3301A4M14W1 028125-034 AL M25 EQP/Hangar X X X3301S4N14W1 028126-034 SS 3/4 NPT EQP/Hangar X X X3301S4M14W1 028127-034 SS M25 EQP/Hangar X X X3301A4N14W2 028128-034 AL 3/4 NPT EQP/Hangar X X X3301A4M14W2 028129-034 AL M25 EQP/Hangar X X X3301S4N14W2 028130-034 SS 3/4 NPT EQP/Hangar X X X3301S4M14W2 028131-034 SS M25 EQP/Hangar X X X3301A4N22W2 028228-005 AL 3/4 NPT EQP/Automotive X X X3301A4M22W2 028229-005 AL M25 EQP/Automotive X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 13.8lb (6.3kg)   X3301 Multispectrum Infrared Flame Detector / xWatch Camera Model Part Number * Material Threads Output Video FM/CSA X3301A3N33A2 029500-XXX AL  3/4 NPT Relay/0-20 NTSC X X3301A3M33A2  029501-XXX AL M25 Relay/0-20 NTSC X X3301S3N33A2 029502-XXX SS  3/4 NPT Relay/0-20 NTSC X X3301S3M33A2  029503-XXX SS M25 Relay/0-20 NTSC X X3301A3N43A2 029504-XXX AL  3/4 NPT Relay/0-20 PAL X X3301A3M43A2 029505-XXX AL M25 Relay/0-20 PAL X X3301S3N43A2 029506-XXX SS  3/4 NPT Relay/0-20 PAL X X3301S3M43A2 029507-XXX SS M25 Relay/0-20 PAL X X3301A3N34A2 029508-001 AL 3/4 NPT EQP NTSC X X3301A3M34A2 029509-001 AL M25 EQP NTSC X X3301S3N34A2 029510-001 SS 3/4 NPT EQP NTSC X X3301S3M34A2 029511-001 SS M25 EQP NTSC X X3301A3N44A2 029512-001 AL 3/4 NPT EQP PAL X X3301A3M44A2 029513-001 AL M25 EQP PAL X X3301S3N44A2 029514-001 SS 3/4 NPT EQP PAL X X3301S3M44A2 029515-001 SS M25 EQP PAL X Ship Weight: Aluminum = 9lb (4.9kg) Stainless Steel = 16.8lb (7.6kg)   *The last 3 digits of the part number identify the software configuration. Please see table A1 to choose the correct option. The standard EQP detectors are completely configurable using the S3 software and are defaulted to the -001 setting. NOTES: 5 year warranty excludes xWatch camera. Models listed above come with a 2.3 mm lens on the camera, which emulates the 90° field of view of the flame detector. See section Flame F for additional lens options.

What is the Oldham Simtronics AS050-2?The Oldham Simtronics AS050-2 is: Laser aimer. The MultiFlame DF-TV7 is an optical flame detector for hydrocarbon fires, designed around minimising false alarms and fitted with an intelligent optical self-test. The family has two detection technologies: the DF-TV7-T reads three separate infrared wavelengths and detects hydrocarbon fires up to 80 metres away, and the DF-TV7-V combines ultraviolet with double infrared for higher immunity to false alarms and a shorter response time, detecting hydrocarbon fires up to 45 metres away. The detector connects directly to conventional fire controllers or to a PLC, and a DF-RV7 variant exists for the addressable SYNTEL network. Configuration, including time delay, sensitivity and output behaviour, is done with the TLU600 hazardous area remote terminal or over HART with a TLH710 or TLH720.About the MultiFlame DF-TV7 Flame Detectors lineThis part is an accessory for the MultiFlame DF-TV7 Flame Detectors line. The specification below describes the detectors it is used with, not the accessory itself.Detection technologies: triple infrared (DF-TV7-T) and ultraviolet with double infrared (DF-TV7-V)Detection distance: up to 80 m for the triple IR version, up to 45 m for the UV/2IR versionField of view up to 120 degrees, per the vendor product overviewOutputs: 4-20 mA, relays, HART as an option, and LonWorks for the SYNTEL systemPower supply 24 V DC (18 to 35 V DC on DF-T#7 versions, 18 to 30 V DC on DF-R#7)Typical power consumption 1.4 W for IR3 and 1.5 W for UV2IR, 5 W maximumOperating and storage temperature: -40 C to +65 CHumidity 95% RH non condensing, protection rating IP66Explosion proof housing in 316 L stainless steel, weight 5.1 kgPerformance certified to EN 54-10/A1, RFI and EMI to EN 50130-4, SIL 2 capableWhat should you check before ordering?The two technologies in this family are not interchangeable and the difference is measurable rather than a matter of preference: the triple IR version reaches 80 metres and is aimed at smoky hydrocarbon fires that are hard to see optically, while the UV/2IR version trades reach for speed and false alarm immunity and reaches 45 metres. Published MTBF also separates them, at 172,000 hours for the DF-TV7-T against 115,000 hours for the DF-TV7-V. One exception is worth catching at specification time: the manual states that reference DF-V7-XT0-0-0-0---1 is neither EN 54-10 compliant nor SIL compliant, so a site with an EN 54-10 requirement cannot take that particular reference.How do the part numbers differ?Part numbers separate the detection technology (XT for triple infrared, XV for ultraviolet with double infrared), the range (A standard, B long), the output (C configurable, H HART, L LON for the SYNTEL network), and the DF-RV7 prefix marks the addressable SYNTEL variant. Published detection distances are test figures: sensitivity in the field also depends on fuel type, fire size, atmospheric conditions such as wind, rain and fog, and the angle between the fire and the detector.Where is it used?Typical service: Refineries and chemical plants; Drilling and production platforms, and FPSO vessels; Fuel loading facilities and compressor stations; LNG and LPG processing and storage; Gas turbines and aircraft hangars; Stadia and gymnasia.How do I order or get a quote?PE Energy supplies the Oldham Simtronics AS050-2 on a quote basis: send the part number with your application details and we return pricing and lead time. Fixed gas and flame detection is quoted rather than listed because most references ship configured for target gas, range, approval scope and cable entry, and those choices are fixed at the part number. This part belongs to the same product line as the MultiFlame DF-TV7 optical flame detector line already in our catalogue.

What is the Oldham Simtronics DF-RV7-XTA0-0XL-0N?The Oldham Simtronics DF-RV7-XTA0-0XL-0N is: 3IR DF-TV7, Standard range, LON protocol. The MultiFlame DF-TV7 is an optical flame detector for hydrocarbon fires, designed around minimising false alarms and fitted with an intelligent optical self-test. The family has two detection technologies: the DF-TV7-T reads three separate infrared wavelengths and detects hydrocarbon fires up to 80 metres away, and the DF-TV7-V combines ultraviolet with double infrared for higher immunity to false alarms and a shorter response time, detecting hydrocarbon fires up to 45 metres away. The detector connects directly to conventional fire controllers or to a PLC, and a DF-RV7 variant exists for the addressable SYNTEL network. Configuration, including time delay, sensitivity and output behaviour, is done with the TLU600 hazardous area remote terminal or over HART with a TLH710 or TLH720.What are the specifications of the MultiFlame DF-TV7 Flame Detectors?Detection technologies: triple infrared (DF-TV7-T) and ultraviolet with double infrared (DF-TV7-V)Detection distance: up to 80 m for the triple IR version, up to 45 m for the UV/2IR versionField of view up to 120 degrees, per the vendor product overviewOutputs: 4-20 mA, relays, HART as an option, and LonWorks for the SYNTEL systemPower supply 24 V DC (18 to 35 V DC on DF-T#7 versions, 18 to 30 V DC on DF-R#7)Typical power consumption 1.4 W for IR3 and 1.5 W for UV2IR, 5 W maximumOperating and storage temperature: -40 C to +65 CHumidity 95% RH non condensing, protection rating IP66Explosion proof housing in 316 L stainless steel, weight 5.1 kgPerformance certified to EN 54-10/A1, RFI and EMI to EN 50130-4, SIL 2 capableWhat should you check before ordering?The two technologies in this family are not interchangeable and the difference is measurable rather than a matter of preference: the triple IR version reaches 80 metres and is aimed at smoky hydrocarbon fires that are hard to see optically, while the UV/2IR version trades reach for speed and false alarm immunity and reaches 45 metres. Published MTBF also separates them, at 172,000 hours for the DF-TV7-T against 115,000 hours for the DF-TV7-V. One exception is worth catching at specification time: the manual states that reference DF-V7-XT0-0-0-0---1 is neither EN 54-10 compliant nor SIL compliant, so a site with an EN 54-10 requirement cannot take that particular reference.How do the part numbers differ?Part numbers separate the detection technology (XT for triple infrared, XV for ultraviolet with double infrared), the range (A standard, B long), the output (C configurable, H HART, L LON for the SYNTEL network), and the DF-RV7 prefix marks the addressable SYNTEL variant. Published detection distances are test figures: sensitivity in the field also depends on fuel type, fire size, atmospheric conditions such as wind, rain and fog, and the angle between the fire and the detector.Where is it used?Typical service: Refineries and chemical plants; Drilling and production platforms, and FPSO vessels; Fuel loading facilities and compressor stations; LNG and LPG processing and storage; Gas turbines and aircraft hangars; Stadia and gymnasia.How do I order or get a quote?PE Energy supplies the Oldham Simtronics DF-RV7-XTA0-0XL-0N on a quote basis: send the part number with your application details and we return pricing and lead time. Fixed gas and flame detection is quoted rather than listed because most references ship configured for target gas, range, approval scope and cable entry, and those choices are fixed at the part number. This part belongs to the same product line as the MultiFlame DF-TV7 optical flame detector line already in our catalogue.

What is the Oldham Simtronics DF-RV7-XVA0-0XL-00?The Oldham Simtronics DF-RV7-XVA0-0XL-00 is: UV2IR DF-TV7, Standard range, LON protocol. The MultiFlame DF-TV7 is an optical flame detector for hydrocarbon fires, designed around minimising false alarms and fitted with an intelligent optical self-test. The family has two detection technologies: the DF-TV7-T reads three separate infrared wavelengths and detects hydrocarbon fires up to 80 metres away, and the DF-TV7-V combines ultraviolet with double infrared for higher immunity to false alarms and a shorter response time, detecting hydrocarbon fires up to 45 metres away. The detector connects directly to conventional fire controllers or to a PLC, and a DF-RV7 variant exists for the addressable SYNTEL network. Configuration, including time delay, sensitivity and output behaviour, is done with the TLU600 hazardous area remote terminal or over HART with a TLH710 or TLH720.What are the specifications of the MultiFlame DF-TV7 Flame Detectors?Detection technologies: triple infrared (DF-TV7-T) and ultraviolet with double infrared (DF-TV7-V)Detection distance: up to 80 m for the triple IR version, up to 45 m for the UV/2IR versionField of view up to 120 degrees, per the vendor product overviewOutputs: 4-20 mA, relays, HART as an option, and LonWorks for the SYNTEL systemPower supply 24 V DC (18 to 35 V DC on DF-T#7 versions, 18 to 30 V DC on DF-R#7)Typical power consumption 1.4 W for IR3 and 1.5 W for UV2IR, 5 W maximumOperating and storage temperature: -40 C to +65 CHumidity 95% RH non condensing, protection rating IP66Explosion proof housing in 316 L stainless steel, weight 5.1 kgPerformance certified to EN 54-10/A1, RFI and EMI to EN 50130-4, SIL 2 capableWhat should you check before ordering?The two technologies in this family are not interchangeable and the difference is measurable rather than a matter of preference: the triple IR version reaches 80 metres and is aimed at smoky hydrocarbon fires that are hard to see optically, while the UV/2IR version trades reach for speed and false alarm immunity and reaches 45 metres. Published MTBF also separates them, at 172,000 hours for the DF-TV7-T against 115,000 hours for the DF-TV7-V. One exception is worth catching at specification time: the manual states that reference DF-V7-XT0-0-0-0---1 is neither EN 54-10 compliant nor SIL compliant, so a site with an EN 54-10 requirement cannot take that particular reference.How do the part numbers differ?Part numbers separate the detection technology (XT for triple infrared, XV for ultraviolet with double infrared), the range (A standard, B long), the output (C configurable, H HART, L LON for the SYNTEL network), and the DF-RV7 prefix marks the addressable SYNTEL variant. Published detection distances are test figures: sensitivity in the field also depends on fuel type, fire size, atmospheric conditions such as wind, rain and fog, and the angle between the fire and the detector.Where is it used?Typical service: Refineries and chemical plants; Drilling and production platforms, and FPSO vessels; Fuel loading facilities and compressor stations; LNG and LPG processing and storage; Gas turbines and aircraft hangars; Stadia and gymnasia.How do I order or get a quote?PE Energy supplies the Oldham Simtronics DF-RV7-XVA0-0XL-00 on a quote basis: send the part number with your application details and we return pricing and lead time. Fixed gas and flame detection is quoted rather than listed because most references ship configured for target gas, range, approval scope and cable entry, and those choices are fixed at the part number. This part belongs to the same product line as the MultiFlame DF-TV7 optical flame detector line already in our catalogue.