pesales@pe-energy.com +1 ( 281 ) 310 – 0628

Det-Tronics

Det-Tronics is renowned in providing proven flame detection, gas detection and hazard mitigation systems for high-risk processes and critical industrial operations.

Showing 1–45 of 64 results

Det-Tronics Duct-Mounting Kits for PointWatch Eclipse Model PIRECL

The Direct Duct Mount Assembly (p/n 007525-XXX series) (Spec Sheet: 90-1151) is FM approved for use with PointWatch Eclipse model PIRECL to be installed directly within air handling ductwork. The assembly is mounted on the duct wall, with the PIRECL sensing chamber exposed directly to duct airflow, ensuring fast response to Methane. A built-in calibration gas nozzle with an external, self-sealing fitting enables testing and calibration without removal of the detector from the duct. Not recommended for applications where duct air temperatures can exceed 167 °F (75 °C). Price includes all necessary hardware for proper operation, but does not include the PointWatch Eclipse PIRECL gas detector. A factory pre-assembled Direct Duct Mount Kit is available (p/n 007529-XXX series) that provides a PIRECL detector prefit into the Direct Duct Mount kit assembly. Pricing for the 007529-XXX assembly includes the PIRECL gas detector. The Direct Duct Mount Assembly complies to the ANSI/ISA-12.13.01-2000 performance standards. Direct Duct Mount Kits (PIRECL not included) Part Number Mount Material Ship Weight 007525-003 Vertical 316 SS 3.5 lb (1.6 kg) 007525-004 Vertical Aluminum 1 lb (0.46 kg) 007525-005 Horizontal 316 SS 3.5 lb (1.6 kg) 007525-006 Horizontal Aluminum 1 lb (0.46 kg) *Use PIRECL with standard baffle. Direct Duct Mount Assemblies Part Number Mount PIRECL Model PIRECL Output Hart Port Material 014101-410 Vertical PIRECLA11D3T1 4-20 mA X 316 SS 014101-440 Vertical PIRECLB11D3T1 4-20 mA X 316 SS 014101-416 Vertical PIRECLA14D3T1 EQP X 316 SS 014101-417 Vertical PIRECLB14D3T1 EQP X 316 SS 007529-903 Vertical PIRECLA4A3R1 EQP X 316 SS 007529-908 Horizontal PIRECLA4A3R1 EQP X 316 SS 007529-909 Vertical PIRECLB1A3R1 4-20mA X 316 SS Ship Weight 15 lb (6.8 kg)
Det-Tronics Eagle Quantum Premier Controller EQ30XX

Eagle Quantum Premier Controller EQ30XX (Spec Sheet: 90-1148) The Eagle Quantum Premier Controller is a microprocessor-based module that performs all the communication and control functions for the system. The controller can be configured in a simplex or redundant mode of operation. It includes all the required operator interface controls for a fire alarm and releasing system. Fire detection and alarm Fire suppression control Gas detection and alarm Available in certified enclosures Compliance to ANSI/ISA-12.13.01-2000 performance standard Performance certified to FM 6310/6320 Performance certified to ATEX/IEC 60079-29-1 Simplex or redundant operation Models with SIL 2 certification Programmable logic Optional Dual Ethernet Ports (Modbus TCP/IP) Multiple serial ports (three RS-232 and two RS-485) Transformer isolation of network ports Utilizes Modbus RTU, Modbus TCP/IP, or Allen Bradley protocols ControlNet Interface (Optional DRL Device level ring EtherNet DLR) Eight Programmable Relay Outputs Dedicated Fault Output Eight Digital Inputs Four-line, 20-character alphanumeric display LED status indicators Fault-tolerant communication loop Extensive built-in diagnostics Real-time clock Compact design US Coast Guard type approval. Lloyd’s Register Type Approval. EQ30XX Model Matrix MODEL DESCRIPTION EQ3001 Eagle Quantum Premier Controller - 246 Nodes EQ3016 Eagle Quantum Premier Controller - 16 Nodes TYPE MOUNTING OPTION D Din Rail P Panel TYPE COM BOARD 1 N None C ControlNet D EtherNet DLR TYPE COM BOARD 2 N None D Ethernet IP with DLR E Ethernet IP S Serial Port Expansion TYPE APPROVALS* R VNIIPO/VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx W FM/CSA/ATEX/IECEx *Type Approvals can use one or more letters to designate the approvals of the product. EQ3001 Controller - SIL 2 Model Part Number Mounting ControlNet Ethernet Ethernet/ IP DLR Serial Port Expansion/ Redundancy Port SIL/FM/CSA/ ATEX/IECEx EQ3001PNNT 007609-072 Panel X EQ3001DNNT 007609-073 DIN X EQ3001PCNT 007609-075 Panel X X EQ3001DCNT 007609-076 DIN X X EQ3001PNET 007609-086 Panel X X X EQ3001DNET 007609-087 DIN X X X EQ3001PCET 007609-088 Panel X X X X EQ3001DCET 007609-089 DIN X X X X EQ3001PNST 007609-077 Panel X X EQ3001DNST 007609-078 DIN X X EQ3001PCST 007609-079 Panel X X X EQ3001DCST 007609-080 DIN X X X EQ3001DDET 007609-189 DIN X X X X Ship Weight: 5.0 lb (2.3 kg) EQ3016 Controller - SIL 2 Model Part Number Mounting ControlNet Ethernet Ethernet/ IP DLR Serial Port Expansion/ Redundancy Port SIL/FM/CSA/ ATEX/IECEx EQ3016PNNT 007609-472 Panel EQ3016DNNT 007609-473 DIN EQ3016PCNT 007609-475 Panel X EQ3016DCNT 007609-476 DIN X X EQ3016PNET 007609-486 Panel X X X EQ3016DNET 007609-487 DIN X X X EQ3016PCET 007609-488 Panel X X X X EQ3016DCET 007609-489 DIN X X X X EQ3016PNST 007609-477 Panel X X EQ3016DNST 007609-478 DIN X X EQ3016PCST 007609-479 Panel X X X EQ3016DCST 007609-480 DIN X X X EQ3016DDET 007609-689 DIN X X X X Ship Weight: 5.0 lb (2.3 kg) EQ3001 Controller Model Part Number Mounting ControlNet Ethernet Ethernet/ IP DLR Serial Port Expansion/ Redundancy Port FM/CSA/ ATEX/IECEx EQ3001PNNW 007609-062 Panel X EQ3001DNNW 007609-063 DIN X EQ3001PCNW 007609-065 Panel X X EQ3001DCNW 007609-066 DIN X X EQ3001PNEW 007609-082 Panel X X X EQ3001DNEW 007609-083 DIN X X X EQ3001PCEW 007609-084 Panel X X X X EQ3001DCEW 007609-085 DIN X X X X EQ3001PNSW 007609-067 Panel X X EQ3001DNSW 007609-068 DIN X X EQ3001PCSW 007609-069 Panel X X X EQ3001DCSW 007609-070 DIN X X X EQ3001PCSW-C* 007609-269 Panel X X X EQ3001DDEW 007609-185 DIN X X X X Ship Weight: 5.0 lb (2.3 kg) *US Coast Guard type approval under 46 CFR 161.002. For use with USCG approved system only. EQ3016 Controller Model Part Number Mounting ControlNet Ethernet Ethernet/ IP DLR Serial Port Expansion/ Redundancy Port FM/CSA/ ATEX/IECEx EQ3016PNNW 007609-462 Panel X EQ3016DNNW 007609-463 DIN X EQ3016PCNW 007609-465 Panel X X EQ3016DCNW 007609-466 DIN X X EQ3016PNEW 007609-482 Panel X X X EQ3016DNEW 007609-483 DIN X X X EQ3016PCEW 007609-484 Panel X X X X EQ3016DCEW 007609-485 DIN X X X X EQ3016PNSW 007609-467 Panel X X EQ3016DNSW 007609-468 DIN X X EQ3016PCSW 007609-469 Panel X X X EQ3016DCSW 007609-470 DIN X X X EQ3016PNNW-C* 007609-282 Panel X EQ3016DDEW 007609-685 DIN X X X X Ship Weight: 5.0 lb (2.3 kg) *US Coast Guard type approval under 46 CFR 161.002. For use with USCG approved system only. Redundancy Parts Part Number* Description Ship Weight 008981-001 Controller to Controller High Speed Serial Cable (4 ft) 1.0 lb (0.45 kg) 008982-001 EQ3LTM LON Termination Module (2 required per LON) 1.0 lb (0.45 kg) *Parts can only be used with EQP Controllers with serial port expansion option. Controller Communication Cables Part Number Description Length Ship Weight 15 ft. (4.57 m) 30 ft. (9.14m) 50 ft. (15.24m) 007633-001 Controller RS-232 Cable (DB9 Female PC Connection) X 1.0 lb (0.45 kg) 007633-002 Controller RS-232 Cable (DB9 Female PC Connection) X 1.0 lb (0.45 kg) 007633-003 Controller RS-232 Cable (DB9 Female PC Connection) X 1.6 lb (0.7 kg) Typical Order for a Redundant System Qty Part Number Description 2 007609-078 EQ3001DNST Controller 1 008981-001 Controller to Controller redundancy High Speed Serial Cable (4 ft) 2 008982-001 EQ3LTM LON Termination Module (2 required per LON) Interface Hardware RS 485 and Hart Part Number Description Ship Weight 014008-001 EQ2230RSP Surge Protector RS485 1.0 lb (.45 kg) 008056-001 HIM, HART Interface Module, EQP 1.0 lb (.45 kg)
Det-Tronics EQ3760 Addressable Smoke Module

The EQP Addressable Smoke Module (Spec Sheet: 90-1226) is designed to expand the input and output capability of the Det-Tronics EQP system. The ASM is an interface device designed to provide continuous and automated fire protection. It ensures system operation through continuous supervision of system inputs/outputs and Local Operating Network/Signaling Line Circuit (LON/SLC) monitoring in the controller. The ASM is located directly on the LON of the EQP system, with a loop of up to 100 addressable devices tied into the ASM. This allows the EQP controller to annunciate a fire alarm from either its own LON based I/O or from the ASM connected addressable smoke and heat detection loops. System status can be determined using the troubleshooting procedures, Eagle Quantum Safety System Software (S3), and the status indicators on the module. Expands the capabilities of the Det-Tronics EQP system Class 1 Div. 2 locations combined with Zone 2 rated devices Type N SIL 2 Capable certification Provides power and communications to 100 addressable devices Uses Apollo Discovery and XP95 smoke and heat detectors ASM alarm and fault status are logged in the EQP controller LEDs for easy annunciation of power, faults and an active device on the loop Monitors single addressable devices Provides remote I/O capabilities via LON/SLC DIN rail or panel mounting Plug-in wiring connectors RFI and EMI hardened Smoke detectors are globally approved (see product data sheets) Option Intrinsically Safe detectors EQ3760 ASM Model Matrix MODEL DESCRIPTION EQ3760 Addressable Smoke Module (ASM) TYPE MOUNTING OPTION D DIN Rail P Panel TYPE APPROVALS T FM/CSA/ATEX/IECEx EQ3760 ASM Module Model Part Number Material FM/CSA/ATEX/IECEx Ship Weight EQ3760DT 014050-001 AL X 3 lb (1.4 kg) EQ3760PT 014050-002 AL X 3 lb (1.4 kg) Devices for EQ3760 ASM Module Model Part Number Material APOLLO IONIZATION SMOKE, EU 000515-501 58000-500 APOLLO OPTICAL SMOKE, EU 000515-502 58000-600 APOLLO HEAT DETECTOR, EU 000515-503 58000-400 APOLLO MULTISENSOR, EU 000515-504 58000-700 APOLLO CO DETECTOR, EU 000515-505 58000-300 APOLLO INTELLIGENT MNT BASE,EU 000515-506 45681-210 APOLLO ISOLATING BASE 000515-507 45681-284 APOLLO INTELLIGENT ISOLATOR 000515-508 55000-720 APOLLO I/O UNIT W/ ISOLATOR 000515-509 55000-847 APOLLO SOUNDER CONTROL UNIT 000515-510 55000-852 APOLLO SWITCH MONITOR PLUS 000515-511 55000-841 APOLLO MANUAL CALL W/ISOLATOR 000515-512 58100-908 APOLLO MANUAL CALL, W/ISO,IP66 000515-513 58100-951 APOLLO MANUAL CALL COVER 000515-514 26729-152 APOLLO SOUNDER, 100DB, RED 000515-515 55000-278 APOLLO SOUNDER,100DB,RED,IP66 000515-516 55000-274 APOLLO BEACON,RED 000515-517 55000-877 APOLLO SOUNDER/BEACON, W/ISO 000515-518 55000-293 APOLLO INTELLIGENT ISOLATOR BA 000515-519 45681-211 APOLLO BLANK ADDRESS CARD 000515-521 38531-771 APOLLO IONIZATION SMOKE, NA 000515-551 58000-550 APOLLO OPTICAL SMOKE, NA 000515-552 58000-650 APOLLO HEAT DETECTOR, NA 000515-553 58000-450 APOLLO MULTISENSOR, NA 000515-554 58000-750 APOLLO MOUNTING BASE 4",NA 000515-555 45681-210USA APOLLO MOUNTING BASE 6",NA 000515-556 45681-225USA APOLLO ISOLATOR, NA 000515-557 55000-750 APOLLO ISOLATOR BASE, NA 000515-558 45681-211USA APOLLO PRIORITY SWITCH MONITOR 000515-559 55000-806 APOLLO SOUNDER CONTROL MOD,NA 000515-560 55000-825 APOLLO I/O MODULE, NA 000515-561 55000-820 APOLLO MINI MONITOR MOD, NA 000515-562 55000-765 APOLLO INTELLIGENT DEEP BASE 000515-563 45681-209 EU = European Approvals NA = North American Approvals NOTE: Average lead time is 4 weeks. For additional options please consult the factory. Compatibility list of products for ASM Description Part Number Apollo Part # Apollo Heat Detector 000515-XXX 5800-400 Apollo Heat Detector, EU Marine 000515-611 58000-400MAR Apollo Heat, IS ** 000515-585 55000-440 Apollo Heat Detector, SIL2 000515-XXX 58000-400SIL Apollo Heat Detector, FM 000515-553 58000-450 Apollo Ionization Smoke, EU 000515-501 58000-500 Apollo Ionization Smoke, Marine 000515-XXX 58000-500MAR Apollo Smoke, EU Marine Optical 000515-XXX 58000-600MAR Apollo Smoke, SIL2 Optical 000515-645 58000-600SIL Apollo Ionization Smoke, IS ** 000515-XXX 58000-540 Apollo Smoke, IS Optical ** 000515-XXX 58000-640 Apollo Ionization Smoke, FM 000515-551 58000-550 Apollo Optical Smoke Detector, FM 000515-552 58000-650 Apollo Duct Smoke Det. Base EU 000515-550 53546-022 Apollo Multisensor, EU Marine 000515-XXX 58000-700MAR Apollo Multisensor, EU 000515-504 58000-700 Apollo Multisensor, SIL2 000515-637 58000-700SIL Apollo Multisensor, FM 000515-554 58000-750 Apollo Carbon Monoxide Detector, EU 000515-505 58000-300 Apollo Input / Output Unit, with Isolator 000515-509 55000-847 Apollo Manual Call, with Isolator 000515-512 58100-908 Apollo Manual Call, with Isolator, IP66 000515-513 58100-951 Apollo Beacon, Red 000515-517 55000-877 Apollo Isolator, FM 000515-557 55000-750 Apollo XP95A Priority Switch Monitor, FM 000515-559 55000-806 Apollo XP95A Sounder Control Module, FM 000515-560 55000-825 Apollo XP95A Input / Output Module, FM 000515-561 55000-820 Apollo Mounting Base, Marine 000515-XXX 45681-210MAR Apollo Mounting Base, IS 000515-586 45681-215 Apollo Isolator Base, Marine 000515-XXX 45681-211MAR Apollo Relay Base, EU 000515-XXX 45681-242 Apollo Manual Call Point, Standard, Non-Isolated, Waterproof, IS ** 000515-581 55000-940 Apollo Manual Call Point, Break Glass, Non-Isolated, Waterproof IS ** 000515-677 55000-960 Apollo Manual Call Point, Push Button, Non-Isolated, Waterproof, IS ** 000515-617 55000-970 Apollo Manual Call, Standard, Non-Isolated, Non-Waterproof, EU 000515-XXX 55200-910 Apollo Manual Call, Standard, Non-Isolated, Waterproof, EU 000515-XXX 55200-950 Apollo Manual Call, Standard, Isolated, Waterproof, Marine 000515-XXX 58200-971MAR Apollo Manual Call, Standard, Isolated, Non-Waterproof, SIL2 000515-XXX 58200-908SIL Apollo Remote Led 1 Gang Red 000116-180 53832-070 Apollo Sounder Control Unit 000515-510 55000-852 Apollo Sounder, 100dB, Red 000515-515 55000-278 Apollo Sounder / Beacon, with Isolator 000515-518 55000-293 Apollo Sounder, 100dB, Red, IP66 000515-516 55000-274 Apollo Sounder XP95a, Isolated, Non-Weatherproof, UL 000515-XXX 55000-041 Apollo Sounder Beacon Discovery, Non-Isolated, Non-Weatherproof, EU 000515-XXX 58000-005 Apollo Sounder Beacon XP95, Isolated, Waterproof, EU 000515-520 55000-298 Apollo Sounder Beacon Discovery, Non-Isolated, Weatherproof, Marine 000515-XXX 55000-374MAR Apollo Sounder Beacon Discovery, Non-Isolated, Weatherproof, UL 000515-XXX 58000-011 Apollo Sounder Beacon Discovery, Isolated, Weatherproof, Marine 000515-XXX 55000-398MAR Apollo Sounder Control, Din Rail, EU 000515-XXX 55000-182 Apollo Sounder Control, Din Rail, Marine 000515-XXX 55000-181MAR Apollo I/O, Din Rail, EU 000515-576 55000-803 Apollo I/O, Din Rail, Marine 000515-XXX 55000-774MAR Apollo 3 Channel I/O, Standard, EU 000515-XXX 55000-588 Apollo I/O, Standard, SIL2 000515-XXX 55000-847SIL Apollo Relay Output, Din Rail, EU 000515-XXX 55000-804 Apollo Relay Output, Din Rail, Marine 000515-XXX 55000-771MAR Apollo Switch Monitor Plus 000515-511 55000-841 Apollo Switch Monitor, Din Rail, EU 000515-675 55000-822 Apollo Switch Monitor Plus, Din Rail, Marine 000515-XXX 55000-772MAR Apollo Mini Switch Monitor, Mini, Marine 000515-XXX 55000-775MAR Apollo Zone Monitor, Standard, Eu 000515-XXX 55000-845 Apollo Zone Monitor, Din Rail, Eu 000515-575 55000-812 Apollo Zone Monitor, Din Rail, Marine 000515-XXX 55000-773MAR Apollo Vac I/O, Standard, FM 000515-XXX 55000-859 Apollo Is Protocol Translator, Sgl ** 000515-582 55000-855 Apollo Is Protocol Translator, Dbl ** 000515-583 55000-856 Apollo Is Galvanic Barrier ** 000515-XXX 29600-098 Apollo Isolator, Marine 000515-XXX 55000-721MAR Apollo Mini Monitor Module, NA or Apollo Priority Mini Switch Monitor, FM 000515-562 55000-765* The device type depends on the priority switch setting on the device. ** Not FM approved as non-interfering FM = FM Approved EU = European Approvals
Det-Tronics Flame Detector Mounting Hardware

Q9001B (Manual: 95-8338) Aluminum swivel for positioning the C7050 and X7050. Q9001H (Manual: 95-8338) Stainless steel swivel for positioning the C7050 and X7050. Q9033A Aluminum Mounting Arm for all aluminum X-Series flame detectors. NOTE: For use with aluminum detectors only. Q9033B Stainless steel Mounting Arm for all X-Series flame detectors (DNV approved with X3301). NOTE: For use with stainless steel and aluminum detectors. Q9033 Collar Attachment (Manual: 95-8686) for all X-Series flame detectors . Used in conjunction with the Q9033A/B Mounting Arm. The Collar Attachment adds versatility to the mounted detector by allowing a wider (3-dimensional) range of motion and improved viewing angles (DNV approved with X3301). Q1130 (Manual: 95-8662) Flange mount assembly for X3301 and X3302, allows the detector to be mounted externally to monitor storage or process areas. Not suitable for Zone 0 defined locations. Flame Detector Mounting Hardware Model Part Number For Use With Ship Weight Q9001B1175 002099-003 AL C7050 and X7050 0.5 lb (0.23 kg) Q9001H8001 004404-002 SS C7050 and X7050 1 lb (0.45 kg) Q9033A1000 007290-002 AL X2200, X5200, X9800, X3301, X3302 6 lb (2.75 kg) Q9033B1000 007290-001 SS X2200, X5200, X9800, X3301, X3302 14 lb (6.4 kg) Q9033 Collar Attachment* 011385-001 Q9033A, Q9033B 2.05 lb (0.9 kg) Q9033 Collar Attachment† 011385-002 Q9033A, Q9033B 2.05 lb (0.9 kg) Q9033 Spare Lock Washer 103019-002 Q9033A, Q9033B 0.04lb (0.02 kg) Q9033A Spare M16 Top Screw 400525-018 Q9033A 0.2 lb (0.1 kg) Q1130A1001 010857-001 X3301, X3302 2.8 lb (1.3 kg) *Note: Screws that connect collar halves enter from the top †Note: Screws that connect collar halves enter from the bottom 4-Inch Pipe Mount Bracket and U-Bolt Kit (Specification Sheet 90-1227) This kit is used to install an X-Series flame detector and Q9033 mounting arm to a 4-inch pipe. This kit includes a pipe mount plate, all hardware for installing mounting arm to plate, and U-Bolts and hardware for attaching the pipe mount plate to a 4-Inch pipe. All materials are 316 Stainless Steel. 4-Inch Pipe Mount Bracket and U-Bolt Kit Model Part Number Ship Weight 4” Pipe Mnt Kit, SS, w/ Hardware 000609-026 2.5 lb (1.3 kg) 2-Inch U-Bolt Kit (Specification Sheet 90-1228) This kit is used to install an X-Series flame detector and Q9033 mounting arm to a 2-inch pipe. This kit includes two U-bolts, washers, lock washers, and hex nuts. All materials are 316 Stainless Steel 2-Inch Pipe Mount Bracket and U-Bolt Kit Model Part Number Ship Weight 2” Pipe Mt. U Bolt Kit 000609-035 0.75 lb (0.3 kg) Sun shade for X-Series Flame Detectors (Specification Sheet 90-1229)The sun shade installs between the wall, pole surface, or pole mount bracket and the Q9033 mounting arm providing the flame detector with protection from the sun and precipitation. Material is 316 Stainless Steel. Detector in photo below is shown installed on a 4-inch pole using the 4-Inch Pipe Mount Bracket and U-Bolt Kit (Part number 000609-026) which is not included with the Sun Shade. Sun shade for X-Series Flame Detectors Model Part Number Ship Weight Stainless Steel Sun Shade for X-Series Flame Detector 000003-067 5 lbs. (2.27 kg)
Det-Tronics PM-5MPX Dual Spectrum Flame Detector

PM-5MPX Dual Spectrum Flame Detector (Spec Sheet: 90-1182) is optimized for the rigorous semiconductor fabrication industry, which is beset with many hazards that result in stringent and application-specific requirements for fire protection safety systems. Additionally, the PM-5MPX is well-suited for the detection of cutting oil fires within CNC machine grinding applications. Complies to FM wet bench performance standards Approved to FM3260: 2000 Dual spectrum IR design Compact size LED indicator for operational status Built-in mounting plate Typical response of <0.5 sec Fast response–-as fast as 25 milliseconds Polypropylene housing: excellent resistance to corrosion and contamination effects FM approved for intrinsic safety CE marked Highly resistant to false alarms May qualify for RoHS machine guarding exception PM-5MPX Dual Spectrum IR Flame Detector MODEL Part Number Encl Material Cable Length FM Ship Weight PM-5MPX 421132-001 Polypropylene 50 ft X 0.5 lb (0.23 kg) PM-5MPX Accessories Part Number Description Ship Weight 007351-001 PSS-ML Test Lamp <1 lb (<0.45 kg)
Det-Tronics X2200 UV Flame Detector

X2200 UV Flame Detector (Spec Sheet: 90-1157) meets the most stringent requirements worldwide with advanced signal processing and immunity to extraneous sources, combined with Ultra-high speed capability. The detector is equipped with both automatic and manual oi (optical integrity). The detector has Division and Zone explosion-proof ratings and is suitable for use in a variety of applications. The standard output configuration includes fire, fault, and auxiliary relays with RS-485 Modbus. Optional 0-20 mA, Pulse, Eagle Quantum Premier, or HART outputs are also available. A model with pulse output is available for easy retrofitting into existing Det-Tronics R74XX controller based systems. The X2200 housing is available in aluminum or stainless steel, with NEMA/Type 4X and IP66/IP67 rating. Typical applications include: HVDC converter stations, munitions, sulfur production, and silane storage. Models available with SIL 2 certification ARC rejection - Advanced signal processing Unequaled false alarm rejection - Solar blind Responds to a fire in the presence of modulated blackbody radiation without false alarm Ultra-High speed capability Optional HART output and AMS aware Automatic, manual, or magnetic oi (optical integrity) testing Pulse output for compatibility with Det-Tronics R74XX controller-based systems (optional) FM, CSA, ATEX, CE, and IECEx EN 54 part 10 certified by BRE, LPCB Tricolor LED indicates normal operation, fire, and fault conditions Mounting arm allows easy sighting Integral wiring compartment for ease of installation Terminal block allows for Class X Pathway Designation per NFPA 72 EMI, RFI, EMC Directive Compliant Built-in data logging / event monitoring Models available with integral Explosion-proof camera option (xWatch) Molybdenum Model available for applications that require increased spectral sensitivity X2200 Model Matrix MODEL DESCRIPTION X2200 UV Flame Detector X2200G UV Flame Detector with Kr85 free Source Tube X2200M* UV Flame Detector with Molybdenum Tube X2200GM* UV Flame Detector with Molybdenum Tube, Kr85 free TYPE MATERIAL A Aluminum (AL) S Stainless Steel (SS) TYPE THREAD TYPE 3M 3 Port, M25† 3N 3 Port, 3/4" NPT† 4M 4 Port, M25 4N 4 Port, 3/4" NPT TYPE OUTPUTS 11 Relay 13 Relay and 0-20 mA 14 Eagle Quantum Premier 15 Relay and Pulse 16 Addressable Module Only (third-party type) 23‡ HART, Relay, and 0-20 mA 24 Eagle Quantum 33 Relay and 0-20 mA / NTSC (xWatch) 34 Eagle Quantum Premier / NTSC (xWatch) 43 Relay and 0-20 mA / PAL (xWatch) 44 Eagle Quantum Premier / PAL (xWatch) TYPE APPROVALS§ A FM/CSA B INMETRO (BRAZIL) E ATEX/IECEx/EN 54-10 R VNIIPO/VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx U TCCExEE/UKRCEPRO (UKRAINE) W FM/CSA/ATEX/IECEx TYPE CLASSIFICATION 1 Division/Zone Ex d e 2 Division/Zone Ex d *Special Application - consult factory before ordering. †3 port models are only available with output types 33, 34, 43, and 44 (xWatch) ‡Type 23 Output - When HART output chosen detector does not have RS-485 communication available. §Type Approvals can use one or more letters to designate the approvals of the product Table D1 - X2200 Software Part Number Configuration Matrix Dash UV Sensitivity Arc Rejection Alarm Relay Aux Output Function Aux Relay Fault Relay -001 High High De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -002 High Very High De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -003 High Off De-Energized Non-latching Pre-Alarm Energized Non-latching Energized Non-latching -005 Medium High De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -006 High High De-Energized Non-latching Pre-Alarm Energized Non-latching Energized Non-latching -007 High High De-Energized Latching Follows Alarm De-energized Latching Energized Non-latching -008 High Very High De-Energized Latching Follows Alarm De-energized Latching Energized Non-latching -009 High Off De-Energized Latching Pre-Alarm De-energized Latching Energized Non-latching -010 Medium High De-Energized Latching Follows Alarm De-energized Latching Energized Non-latching -011 High High De-Energized Latching Pre-Alarm De-energized Latching Energized Non-latching -013* High Off De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -014* High Off De-Energized Latching Follows Alarm De-Energized Non-latching Energized Non-latching -015 Very High Low De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -016 Very High Low De-Energized Latching Follows Alarm De-Energized Non-latching Energized Non-latching -017 Very High Off De-Energized Non-latching Pre-Alarm Energized Non-latching Energized Non-latching -018 Very High Off De-Energized Non-latching Follows Alarm Energized Non-latching Energized Non-latching -019 Very High Off De-Energized Non-latching Pre-Alarm De-Energized Non-latching Energized Non-latching *Available only on the X2200M model ARC = Arc Rejection. An algorithm that prevents false alarms from transient UV sources Application Guidelines The following criteria should be considered when choosing a sensitivity level for the intended application: Speed of response based on fuel type and fire size Distance between the hazard and the flame detector These are typical industry application settings. They may not be applicable to all installations. Contact factory for additional application guidance. HVDC 019 Compressor 002 High Speed 003 Automotive 005 Turbine 006 Munitions 013/019 NOTE: Latching relays cannot be used in voted systems. X2200 UV Flame Detector - SIL 2 Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone SIL/FM/CSA/ ATEX/IECEx X2200A4N13T1 008430-XXX AL 3/4 NPT Relay/0-20 mA X X X2200A4M13T1 008431-XXX AL M25 Relay/0-20 mA X X X2200S4N13T1 008432-XXX SS 3/4 NPT Relay/0-20 mA X X X2200S4M13T1 008433-XXX SS M25 Relay/0-20 mA X X X2200A4N13T2 008434-XXX AL 3/4 NPT Relay/0-20 mA X X X2200A4M13T2 008435-XXX AL M25 Relay/0-20 mA X X X2200S4N13T2 008436-XXX SS 3/4 NPT Relay/0-20 mA X X X2200S4M13T2 008437-XXX SS M25 Relay/0-20 mA X X X2200A4N23T1 008438-XXX AL 3/4 NPT Rly/0-20/HART X X X2200A4M23T1 008439-XXX AL M25 Rly/0-20/HART X X X2200S4N23T1 008440-XXX SS 3/4 NPT Rly/0-20/HART X X X2200S4M23T1 008441-XXX SS M25 Rly/0-20/HART X X X2200A4N23T2 008442-XXX AL 3/4 NPT Rly/0-20/HART X X X2200A4M23T2 008443-XXX AL M25 Rly/0-20/HART X X X2200S4N23T2 008444-XXX SS 3/4 NPT Rly/0-20/HART X X X2200S4M23T2 008445-XXX SS M25 Rly/0-20/HART X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option. X2200 UV Flame Detector - Moly - SIL 2 The X2200M UV detector utilizes a molybdenum (moly) sensing element. Moly-based sensors have an increased spectral range of 1850 to 2650 angstroms, which is better suited for detecting substances with unusual chemistry, sulfur fires, and some black powders. Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d SIL/FM/CSA/ ATEX/IECEx X2200MA4N23T1 008446-XXX AL 3/4 NPT Rly/0-20/HART X X X2200MA4M23T1 008447-XXX AL M25 Rly/0-20/HART X X X2200MS4N23T1 008448-XXX SS 3/4 NPT Rly/0-20/HART X X X2200MS4M23T1 008449-XXX SS M25 Rly/0-20/HART X X X2200MA4N23T2 008450-XXX AL 3/4 NPT Rly/0-20/HART X X X2200MA4M23T2 008451-XXX AL M25 Rly/0-20/HART X X X2200MS4N23T2 008452-XXX SS 3/4 NPT Rly/0-20/HART X X X2200MS4M23T2 008453-XXX SS M25 Rly/0-20/HART X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) X2200 UV Flame Detector Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d FM/CSA/ ATEX/IECEx X2200A4N11W1 008300-XXX AL 3/4 NPT Relay X X X2200A4M11W1 008301-XXX AL M25 Relay X X X2200S4N11W1 008302-XXX SS 3/4 NPT Relay X X X2200S4M11W1 008303-XXX SS M25 Relay X X X2200A4N11W2 008304-XXX AL 3/4 NPT Relay X X X2200A4M11W2 008305-XXX AL M25 Relay X X X2200S4N11W2 008306-XXX SS 3/4 NPT Relay X X X2200S4M11W2 008307-XXX SS M25 Relay X X X2200A4N14W1 008316-001 AL 3/4 NPT EQP X X X2200A4M14W1 008317-001 AL M25 EQP X X X2200S4N14W1 008318-001 SS 3/4 NPT EQP X X X2200S4M14W1 008319-001 SS M25 EQP X X X2200A4N14W2 008320-001 AL 3/4 NPT EQP X X X2200A4M14W2 008321-001 AL M25 EQP X X X2200S4N14W2 008322-001 SS 3/4 NPT EQP X X X2200S4M14W2 008323-001 SS M25 EQP X X X2200A4N15W1 008324-XXX AL 3/4 NPT Pulse/Relay X X X2200A4M15W1 008325-XXX AL M25 Pulse/Relay X X X2200S4N15W1 008326-XXX SS 3/4 NPT Pulse/Relay X X X2200S4M15W1 008327-XXX SS M25 Pulse/Relay X X X2200A4N15W2 008328-XXX AL 3/4 NPT Pulse/Relay X X X2200A4M15W2 008329-XXX AL M25 Pulse/Relay X X X2200S4N15W2 008330-XXX SS 3/4 NPT Pulse/Relay X X X2200S4M15W2 008331-XXX SS M25 Pulse/Relay X X X2200A4N24W1 008356-001 AL 3/4 NPT Eagle Quantum X X X2200A4M24W1 008357-001 AL M25 Eagle Quantum X X X2200S4N24W1 008358-001 SS 3/4 NPT Eagle Quantum X X X2200S4M24W1 008359-001 SS M25 Eagle Quantum X X X2200A4N24W2 008360-001 AL 3/4 NPT Eagle Quantum X X X2200A4M24W2 008361-001 AL M25 Eagle Quantum X X X2200S4N24W2 008362-001 SS 3/4 NPT Eagle Quantum X X X2200S4M24W2 008363-001 SS M25 Eagle Quantum X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option. The EQ and EQP detectors are completely configurable using the configuration software and are shipped defaulted to the -001 setting. X2200M UV Flame Detector - Moly The X2200M UV detector utilizes a molybdenum (moly) sensing element. Moly-based sensors have an increased spectral range of 1850 to 2650 angstroms, which is better suited for detecting substances with unusual chemistry, sulfur fires, and some black powders. Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d FM/CSA/ ATEX/IECEx X2200MA4N13W1 008340-013 AL 3/4 NPT Relay/0-20 mA X X X2200MA4M13W1 008341-013 AL M25 Relay/0-20 mA X X X2200MS4N13W1 008342-013 SS 3/4 NPT Relay/0-20 mA X X X2200MS4M13W1 008343-013 SS M25 Relay/0-20 mA X X X2200MA4N13W2 008344-013 AL 3/4 NPT Relay/0-20 mA X X X2200MA4M13W2 008345-013 AL M25 Relay/0-20 mA X X X2200MS4N13W2 008346-013 SS 3/4 NPT Relay/0-20 mA X X X2200MS4M13W2 008347-013 SS M25 Relay/0-20 mA X X X2200MA4N14W1 008372-001 AL 3/4 NPT EQP X X X2200MA4M14W1 008373-001 AL M25 EQP X X X2200MS4N14W1 008374-001 SS 3/4 NPT EQP X X X2200MS4M14W1 008375-001 SS M25 EQP X X X2200MA4N14W2 008376-001 AL 3/4 NPT EQP X X X2200MA4M14W2 008377-001 AL M25 EQP X X X2200MS4N14W2 008378-001 SS 3/4 NPT EQP X X X2200MS4M14W2 008379-001 SS M25 EQP X X X2200MA4N15W1 008348-013 AL 3/4 NPT Pulse/Relay X X X2200MA4M15W1 008349-013 AL M25 Pulse/Relay X X X2200MS4N15W1 008350-013 SS 3/4 NPT Pulse/Relay X X X2200MS4M15W1 008351-013 SS M25 Pulse/Relay X X X2200MA4N15W2 008352-013 AL 3/4 NPT Pulse/Relay X X X2200MA4M15W2 008353-013 AL M25 Pulse/Relay X X X2200MS4N15W2 008354-013 SS 3/4 NPT Pulse/Relay X X X2200MS4M15W2 008355-013 SS M25 Pulse/Relay X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option. The EQP detectors are completely configurable using the S3 configuration software and are shipped defaulted to the -001 setting. X2200G UV Flame Detector - ATEX/IECEx/EN 54-10 The X2200G UV Flame Detector contains a Kr-85 free source tube. There are no differences in detection performance when compared to an X2200. Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d ATEX/IECEx/ EN 54-10 X2200GA4N11E1 013010-XXX AL 3/4 NPT Relay X X X2200GA4M11E1 013011-XXX AL M25 Relay X X X2200GS4N11E1 013012-XXX SS 3/4 NPT Relay X X X2200GS4M11E1 013013-XXX SS M25 Relay X X X2200GA4N11E2 013014-XXX AL 3/4 NPT Relay X X X2200GA4M11E2 013015-XXX AL M25 Relay X X X2200GS4N11E2 013016-XXX SS 3/4 NPT Relay X X X2200GS4M11E2 013017-XXX SS M25 Relay X X X2200GA4N13E1 013018-XXX AL 3/4 NPT Relay/0-20 mA X X X2200GA4M13E1 013019-XXX AL M25 Relay/0-20 mA X X X2200GS4N13E1 013020-XXX SS 3/4 NPT Relay/0-20 mA X X X2200GS4M13E1 013021-XXX SS M25 Relay/0-20 mA X X X2200GA4N13E2 013022-XXX AL 3/4 NPT Relay/0-20 mA X X X2200GA4M13E2 013023-XXX AL M25 Relay/0-20 mA X X X2200GS4N13E2 013024-XXX SS 3/4 NPT Relay/0-20 mA X X X2200GS4M13E2 013025-XXX SS M25 Relay/0-20 mA X X X2200GA4N23E1 013026-XXX AL 3/4 NPT Rly/0-20/HART X X X2200GA4M23E1 013027-XXX AL M25 Rly/0-20/HART X X X2200GS4N23E1 013028-XXX SS 3/4 NPT Rly/0-20/HART X X X2200GS4M23E1 013029-XXX SS M25 Rly/0-20/HART X X X2200GA4N23E2 013030-XXX AL 3/4 NPT Rly/0-20/HART X X X2200GA4M23E2 013031-XXX AL M25 Rly/0-20/HART X X X2200GS4N23E2 013032-XXX SS 3/4 NPT Rly/0-20/HART X X X2200GS4M23E2 013033-XXX SS M25 Rly/0-20/HART X X X2200GA4N14E1 013034-XXX AL 3/4 NPT EQP X X X2200GA4M14E1 013035-XXX AL M25 EQP X X X2200GS4N14E1 013036-XXX SS 3/4 NPT EQP X X X2200GS4M14E1 013037-XXX SS M25 EQP X X X2200GA4N14E2 013038-XXX AL 3/4 NPT EQP X X X2200GA4M14E2 013039-XXX AL M25 EQP X X X2200GS4N14E2 013040-XXX SS 3/4 NPT EQP X X X2200GS4M14E2 013041-XXX SS M25 EQP X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option. The EQP detectors are completely configurable using the configuration software and are shipped defaulted to the -001 setting. X2200G UV Flame Detector - CSA Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d CSA X2200GA4N13C1 013098-001 AL 3/4 NPT Relay and 0-20 mA X X X2200GA4N13C2 013102-001 AL 3/4 NPT Relay and 0-20 mA X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) X2200GM UV Flame Detector - Moly In addition to having a Kr-85 free source tube, the X2200GM UV Flame Detector utilizes a molybdenum (moly) sensing element. Moly-based sensors have an increased spectral range of 1850 to 2650 angstroms, which is better suited for detecting substances with unusual chemistry, sulfur fires, and some black powders. Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d FM/CSA/ ATEX/IECEx X2200GMA4N11E2 013042-003 AL 3/4 NPT Relay/0-20 mA X X2200GMA4N11E2 013042-013 AL 3/4 NPT Relay/0-20 mA X X2200GMA4M11E2 013043-003 AL M25 Relay/0-20 mA X X2200GMA4M11E2 013043-013 AL M25 Relay/0-20 mA X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option. The EQP detectors are completely configurable using the S3 configuration software and are shipped defaulted to the -001 setting. X2200 UV Flame Detector / xWatch Camera Model Part Number * Material Threads Output Video FM/CSA X2200A3N33A2 009564-XXX AL 3/4 NPT Relay/0-20 NTSC X X2200A3M33A2 009565-XXX AL M25 Relay/0-20 NTSC X X2200S3N33A2 009566-XXX SS 3/4 NPT Relay/0-20 NTSC X X2200S3M33A2 009567-XXX SS M25 Relay/0-20 NTSC X X2200A3N43A2 009568-XXX AL 3/4 NPT Relay/0-20 PAL X X2200A3M43A2 009569-XXX AL M25 Relay/0-20 PAL X X2200S3N43A2 009570-XXX SS 3/4 NPT Relay/0-20 PAL X X2200S3M43A2 009571-XXX SS M25 Relay/0-20 PAL X X2200A3N34A2 009572-001 AL 3/4 NPT EQP NTSC X X2200A3M34A2 009573-001 AL M25 EQP NTSC X X2200S3N34A2 009574-001 SS 3/4 NPT EQP NTSC X X2200S3M34A2 009575-001 SS M25 EQP NTSC X X2200A3N44A2 009576-001 AL 3/4 NPT EQP PAL X X2200A3M44A2 009577-001 AL M25 EQP PAL X X2200S3N44A2 009578-001 SS 3/4 NPT EQP PAL X X2200S3M44A2 009579-001 SS M25 EQP PAL X Ship Weight: Aluminum = 9lb (4.1kg) Stainless Steel = 17.6lb (7.9kg) *The last 3 digits of the part number identify the software configuration. Please see table D1 to choose the correct option. The standard EQP detectors are completely configurable using the S3 software and are defaulted to the -001 setting. NOTES: 3 year warranty excludes xWatch camera. Models listed above come with a 2.3 mm lens on the camera, which emulates the 90° field of view of the flame detector. See section Flame F for additional lens options.
Det-Tronics X3302 Multispectrum Infrared Flame Detector

X3302 Multispectrum Infrared Flame Detector (Spec Sheet: 90-1232) provides a large field of view for hydrogen fire detection coupled with superior false alarm rejection. The detector utilizes advanced signal processing algorithms supported by an embedded 32-bit microprocessor to provide continuous protection in the presence of false alarm sources and environments with infrared radiation present. When configured for Very High Sensitivity, the X3302 has a detection range of 125 feet on axis and 100 feet off axis to a hydrogen fire and is recommended for any indoor/outdoor application. The detector is available in aluminum or stainless steel. Standard outputs include fire alarm, auxiliary alarm and fault relays, with RS 485 Modbus. Optional 0-20 mA, HART, Pulse, or Eagle Quantum Premier outputs are also available. Pulse output is available for easy retrofitting into Det-Tronics R74XX controller based systems. Ideal applications include hydrogen storage, aerospace, battery rooms, and filling stations. Eagle Quantum Premier model Models available with SIL 2 certification Multiple sensitivities and certified performance to Hydrogen and Methanol Terminal block allows for Class X Pathway Designation per NFPA 72 125 feet on axis and 100 feet off axis detection range for hydrogen fire Microprocessor controlled heated optics, enable optimal performance in adverse environments Data logger for event time and date stamping Optional HART output, AMS aware, and FDT/DTM capable Automatic oi (optical integrity) continuously verifies each sensors ability to detect fire Calibrated manual testing/magnetic oi, no test lamp required Four conduit entries for easy installation Division Approval Ratings: FM and CSA Zone Approval Ratings: FM, CSA, ATEX, and IECEx Models available with integral Explosion-proof camera option (xWatch) Tricolor LED on detector faceplate indicates detector status condition X3302 Model Matrix MODEL DESCRIPTION X3302 Multispectrum IR Flame Detector TYPE MATERIAL A Aluminum (AL) S Stainless Steel (SS) TYPE THREAD TYPE 3M 3 Port, M25* 3N 3 Port, 3/4" NPT* 4M 4 Port, M25 4N 4 Port, 3/4" NPT TYPE OUTPUTS 13 Relay and 0-20 mA 14 Eagle Quantum Premier (EQP) 15 Relay and Pulse 16 Addressable Module Only (third-party type) 23† HART, Relay, and 0-20 mA 33 Relay and 0-20 mA/ NTSC (xWatch) 34 Eagle Quantum Premier / NTSC (xWatch) 43 Relay and 0-20 mA / PAL (xWatch) 44 Eagle Quantum Premier / PAL (xWatch) TYPE APPROVALS‡ A FM/CSA B INMETRO (BRAZIL) R VNIIPO/VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx W FM/CSA/ATEX/IECEx TYPE CLASSIFICATION 1 Division/Zone Ex d e 2 Division/Zone Ex d *3-port models only available with output types 33, 34, 43, and 44 (xWatch) † Type 23 Output - When HART output chosen detector does not have RS-485 communication available. ‡Type Approvals can use one or more letters to designate the approvals of the product. Table A2 - X3302 Software Part Number Configuration Matrix Dash Sensitivity Alarm Relay Aux Relay Fault Relay Special -001 Medium De-energized Non-latching Energized Non-latching Energized Non-latching None -002 Very High De-energized Non-latching Energized Non-latching Energized Non-latching None -004 Low De-energized Non-latching Energized Non-latching Energized Non-latching 3 min oi 10 fails to fault -006 Medium De-energized Non-latching De-energized Non-latching Energized Non-latching None -007 Very High De-energized Non-latching De-energized Non-latching Energized Non-latching None -009 Low De-energized Non-Latching De-energized Non-Latching Energized Non-latching 3 min oi 10 fails to fault -050 High De-energized Non-Latching Energized Non-latching Energized Non-latching None -051 High De-energized Non-Latching Energized Non-latching Energized Non-latching None NOTE: The X3302 window heaters are set to 100% as a default but can be configured from 0-100% with the Enhanced Flame Inspector. Please refer to section E.3 for more details. Application Guidelines The following criteria should be considered when choosing a sensitivity level for the intended application: Speed of response based on fuel type and fire size Distance between the hazard and the flame detector These are typical industry application settings. They may not be applicable to all installations. Contact factory for additional application guidance. NOTE: Latching relays cannot be used in voted systems. Fertilizer (Outdoor), Ammonia, Refrigerants 001 Aerospace, Hydrogen Storage 002 Filling Stations, Turbines 004 Fertilizer (Indoor), Refrigerants, Compressors, Battery Manufacturing 050 X3302 Multispectrum Infrared Flame Detector - SIL 2 Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d FM/CSA/ ATEX/IECEx SIL 2 X3302A4N13T1 029008-XXX AL 3/4 NPT Relay/0-20mA X X X X3302A4M13T1 029009-XXX AL M25 Relay/0-20mA X X X X3302S4N13T1 029010-XXX SS 3/4 NPT Relay/0-20mA X X X X3302S4M13T1 029011-XXX SS M25 Relay/0-20mA X X X X3302A4N13T2 029012-XXX AL 3/4 NPT Relay/0-20mA X X X X3302A4M13T2 029013-XXX AL M25 Relay/0-20mA X X X X3302S4N13T2 029014-XXX SS 3/4 NPT Relay/0-20mA X X X X3302S4M13T2 029015-XXX SS M25 Relay/0-20mA X X X X3302A4N23T1 029032-XXX AL 3/4 NPT Relay/0-20mA/HART X X X X3302A4M23T1 029033-XXX AL M25 Relay/0-20mA/HART X X X X3302S4N23T1 029034-XXX SS 3/4 NPT Relay/0-20mA/HART X X X X3302S4M23T1 029035-XXX SS M25 Relay/0-20mA/HART X X X X3302A4N23T2 029036-XXX AL 3/4 NPT Relay/0-20mA/HART X X X X3302A4M23T2 029037-XXX AL M25 Relay/0-20mA/HART X X X X3302S4N23T2 029038-XXX SS 3/4 NPT Relay/0-20mA/HART X X X X3302S4M23T2 029039-XXX SS M25 Relay/0-20mA/HART X X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 13.8lb (6.3kg) X3302 Multispectrum Infrared Flame Detector Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d FM/CSA ATEX/IECEx X3302A4N13W1 029000-XXX AL 3/4 NPT Relay/0-20mA X X X3302A4M13W1 029001-XXX AL M25 Relay/0-20mA X X X3302S4N13W1 029002-XXX SS 3/4 NPT Relay/0-20mA X X X3302S4M13W1 029003-XXX SS M25 Relay/0-20mA X X X3302A4N13W2 029004-XXX AL 3/4 NPT Relay/0-20mA X X X3302A4M13W2 029005-XXX AL M25 Relay/0-20mA X X X3302S4N13W2 029006-XXX SS 3/4 NPT Relay/0-20mA X X X3302S4M13W2 029007-XXX SS M25 Relay/0-20mA X X X3302A4N15W1 029016-XXX AL 3/4 NPT Pulse/Relay X X X3302A4M15W1 029017-XXX AL M25 Pulse/Relay X X X3302S4N15W1 029018-XXX SS 3/4 NPT Pulse/Relay X X X3302S4M15W1 029019-XXX SS M25 Pulse/Relay X X X3302A4N15W2 029020-XXX AL 3/4 NPT Pulse/Relay X X X3302A4M15W2 029021-XXX AL M25 Pulse/Relay X X X3302S4N15W2 029022-XXX SS 3/4 NPT Pulse/Relay X X X3302S4M15W2 029023-XXX SS M25 Pulse/Relay X X X3302A4N14W1 029024-001 AL 3/4 NPT EQP X X X3302A4M14W1 029025-001 AL M25 EQP X X X3302S4N14W1 029026-001 SS 3/4 NPT EQP X X X3302S4M14W1 029027-001 SS M25 EQP X X X3302A4N14W2 029028-001 AL 3/4 NPT EQP X X X3302A4M14W2 029029-001 AL M25 EQP X X X3302S4N14W2 029030-001 SS 3/4 NPT EQP X X X3302S4M14W2 029031-001 SS M25 EQP X X X3302A4N23W1 029090-XXX AL 3/4 NPT Relay/0-20mA/HART X X X3302A4M23W1 029091-XXX AL M25 Relay/0-20mA/HART X X X3302S4N23W1 029092-XXX SS 3/4 NPT Relay/0-20mA/HART X X X3302S4M23W1 029093-XXX SS M25 Relay/0-20mA/HART X X X3302A4N23W2 029094-XXX AL 3/4 NPT Relay/0-20mA/HART X X X3302A4M23W2 029095-XXX AL M25 Relay/0-20mA/HART X X X3302S4N23W2 029096-XXX SS 3/4 NPT Relay/0-20mA/HART X X X3302S4M23W2 029097-XXX SS M25 Relay/0-20mA/HART X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 13.8lb (6.3kg) *The last 3 digits of the part number identify the software configuration. Please see table A2 to choose the correct option. The standard EQP detectors are completely configurable using the S3 software and are shipped defaulted to the -001 setting
Det-Tronics X5200 UVIR Flame Detector

X5200 UVIR Flame Detector (Spec Sheet: 90-1156) meets the most stringent requirements worldwide with advanced ultra high speed detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The combination of Arc Rejection on the UV sensor and TDSA/Quick Fire on the IR sensor make this detector the highest false alarm immune UVIR available. The mounting arrangement allows the UV and IR sensors to monitor the same hazardous location with a 90-degree field of view. When both sensors simultaneously detect the presence of a flame, an alarm signal is generated. The standard output configuration includes fire, fault, and auxiliary relays with RS-485 Modbus. Optional 0-20 mA, Eagle Quantum Premier, or HART outputs are also available. Auxiliary relay offers the flexibility to customize detection, using UV, IR, or both. A model with pulse output is available for easy retrofitting into existing Det-Tronics controller based systems. The X5200 housing is available in aluminum or stainless steel, with NEMA/Type 4X and IP66/IP67 rating. Typical applications include paper machines, munitions, petrochemical applications, and aerosol filling. Eagle Quantum Premier and Eagle Quantum compatible models available Models available with SIL 2 certification Responds to a fire in the presence of modulated blackbody radiation (i.e., heaters, ovens, turbines) without false alarm Ultra high speed capability Optional HART output, AMS aware, and FDT/DTM capable Heated optics for increased resistance to moisture and ice Automatic, manual, or magnetic oi (optical integrity) FM, CSA, ATEX, and IECEx EN 54 part 10 certified by BRE, LPCB Meets Construction Product Directive Configurable auxiliary relay allows independent alarm signaling Terminal block allows for Class X Pathway Designation per NFPA 72 EMI, RFI, EMC Directive Compliant Built-in data logging / event monitoring Models available with integral Explosion-proof camera option (xWatch) Tricolor LED on detector faceplate indicates detector status condition X5200 Model Matrix MODEL DESCRIPTION X5200 UVIR Flame Detector X5200G UVIR Flame Detector with Kr85 free Source Tube X5200M* UVIR Flame Detector with Molybdenum Tube TYPE MATERIAL A Aluminum (AL) S Stainless Steel (SS) TYPE THREAD TYPE 3M 3 Port, M25† 3N 3 Port, 3/4" NPT† 4M 4 Port, M25 4N 4 Port, 3/4" NPT TYPE OUTPUTS 11 Relay 13 Relay and 0-20 mA 14 Eagle Quantum Premier 24 Eagle Quantum 15 Relay and Pulse 16 Addressable Module Only (third-party type) 23‡ HART, Relay, and 0-20 mA 33 Relay and 0-20 mA / NTSC (xWatch) 34 Eagle Quantum Premier / NTSC (xWatch) 43 Relay and 0-20 mA / PAL (xWatch) 44 Eagle Quantum Premier / PAL (xWatch) TYPE APPROVALS§ A FM/CSA B INMETRO (BRAZIL) E ATEX/IECEx/EN 54-10 R VNIIPO/VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx U TCCExEE/UKRCEPRO (UKRAINE) W FM/CSA/ATEX/IECEx TYPE CLASSIFICATION 1 Division/Zone Ex d e 2 Division/Zone Ex d *Special Application - consult factory before ordering. †3-port models only available with output types 33, 34, 43, and 44 (xWatch) ‡Type 23 Output - When HART output chosen detector does not have RS-485 communication available. §Type Approvals can use one or more letters to designate the approvals of the product Table B1 - X5200 Software Part Number Configuration Matrix Dash UV Sensitivity Arc Rejection IR Sensitivity Alarm Output IR Qualifications Alarm Relay Aux Output Function ARC Rejection Aux Output IR Qualifications Aux Relay Alarm Relay -001 High High High TDSA Only De-Energized Non-latching Follows Alarm High TDSA Energized Non-latching Energized Non-latching -002 High Very High High TDSA or Quick De-Energized Non-latching Follows Alarm Very High TDSA or Quick Energized Non-latching Energized Non-latching -003 High Off Very High TDSA or Quick De-Energized Non-latching UV or IR Off TDSA Energized Non-latching Energized Non-latching -004 High High Very High TDSA Only De-Energized Non-latching Pre-Alarm High TDSA Energized Non-latching Energized Non-latching -005 Medium High High TDSA or Quick De-Energized Non-latching UV or IR High TDSA Energized Non-latching Energized Non-latching -006 High High Low TDSA Only De-Energized Non-latching Pre-Alarm High TDSA Energized Non-latching Energized Non-latching -007 High High High TDSA Only De-Energized Latching Follows Alarm High TDSA De-energized Latching Energized Non-latching -008 High Very High High TDSA or Quick De-Energized Latching Follows Alarm Very High TDSA or Quick De-energized Latching Energized Non-latching -009 High Off Very High TDSA or Quick De-Energized Latching UV or IR Off TDSA De-energized Latching Energized Non-latching -010 High High Very High TDSA Only De-Energized Latching Pre-Alarm High TDSA De-energized Latching Energized Non-latching -011 Medium High High TDSA or Quick De-Energized Latching UV or IR High TDSA De-energized Latching Energized Non-latching -012 High High Low TDSA Only De-Energized Latching Pre-Alarm High TDSA De-energized Latching Energized Non-latching -013* High Off High TDSA or Quick De-Energized Non-Latching Follows Alarm Off TDSA or Quick Energized Non-Latching Energized Non-latching -014* High Off High TDSA or Quick De-Energized Latching Follows Alarm Off TDSA or Quick De-energized Latching Energized Non-latching -015 Very High Low Very High TDSA or Quick De-Energized Non-Latching Follows Alarm Off TDSA or Quick Energized Non-Latching Energized Non-latching -016 Very High Low Very High TDSA or Quick De-Energized Latching Follows Alarm Off TDSA or Quick De-energized Latching Energized Non-latching -019 Very High Off Very High TDSA or Quick De-Energized Non-Latching UV or IR Off TDSA Energized Non-Latching Energized Non-latching -021 Very High Off Very High TDSA or Quick De-Energized Latching Follows Alarm Off TDSA or Quick Energized Latching Energized Non-latching -022 Very High Off Very High TDSA or Quick De-Energized Non-Latching UV or IR Off TDSA or Quick De-Energized Non-latching Energized Non-latching *Available only on the X5200M model ARC = Arc Rejection. An algorithm that prevents false alarms from transient UV sources TDSA = "Time Domain Signal Analysis" proprietary signal processing algorithm for superior IR false alarm rejection Quick = Signal processing for explosive IR events Application Guidelines The following criteria should be considered when choosing a sensitivity level for the intended application: Speed of response based on fuel type and fire size Distance between the hazard and the flame detector These are typical industry application settings. They may not be applicable to all installations. Contact factory for additional application guidance. Offshore 001 Compressor 002 Paper Machine 003 Engine Test Cells 001 Aerosol Fill 013/022 Munitions 013/022 High Speed 013/022 NOTE: Latching relays cannot be used in voted systems. X5200 UVIR Flame Detector - SIL 2 Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone SIL/FM/CSA/ ATEX/IECEx X5200A4N13T1 008650-XXX AL 3/4 NPT Relay/0-20 mA X X X5200A4M13T1 008651-XXX AL M25 Relay/0-20 mA X X X5200S4N13T1 008652-XXX SS 3/4 NPT Relay/0-20 mA X X X5200S4M13T1 008653-XXX SS M25 Relay/0-20 mA X X X5200A4N13T2 008654-XXX AL 3/4 NPT Relay/0-20 mA X X X5200A4M13T2 008655-XXX AL M25 Relay/0-20 mA X X X5200S4N13T2 008656-XXX SS 3/4 NPT Relay/0-20 mA X X X5200S4M13T2 008657-XXX SS M25 Relay/0-20 mA X X X5200A4N23T1 008658-XXX AL 3/4 NPT Rly/0-20/HART X X X5200A4M23T1 008659-XXX AL M25 Rly/0-20/HART X X X5200S4N23T1 008660-XXX SS 3/4 NPT Rly/0-20/HART X X X5200S4M23T1 008661-XXX SS M25 Rly/0-20/HART X X X5200A4N23T2 008662-XXX AL 3/4 NPT Rly/0-20/HART X X X5200A4M23T2 008663-XXX AL M25 Rly/0-20/HART X X X5200S4N23T2 008664-XXX SS 3/4 NPT Rly/0-20/HART X X X5200S4M23T2 008665-XXX SS M25 Rly/0-20/HART X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) X5200 UVIR Flame Detector - Moly - SIL 2 Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d SIL/FM/CSA/ ATEX/IECEx X5200MA4N23T1 008666-XXX AL 3/4 NPT Rly/0-20/HART X X X5200MA4M23T1 008667-XXX AL M25 Rly/0-20/HART X X X5200MS4N23T1 008668-XXX SS 3/4 NPT Rly/0-20/HART X X X5200MS4M23T1 008669-XXX SS M25 Rly/0-20/HART X X X5200MA4N23T2 008670-XXX AL 3/4 NPT Rly/0-20/HART X X X5200MA4M23T2 008671-XXX AL M25 Rly/0-20/HART X X X5200MS4N23T2 008672-XXX SS 3/4 NPT Rly/0-20/HART X X X5200MS4M23T2 008673-XXX SS M25 Rly/0-20/HART X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) *The last 3 digits of the part number identify the software configuration. Please see table B1 to choose the correct option. X5200 UVIR Flame Detector Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d FM/CSA/ ATEX/IECEx X5200A4N11W1 008500-XXX AL 3/4 NPT Relay X X X5200A4M11W1 008501-XXX AL M25 Relay X X X5200S4N11W1 008502-XXX SS 3/4 NPT Relay X X X5200S4M11W1 008503-XXX SS M25 Relay X X X5200A4N11W2 008504-XXX AL 3/4 NPT Relay X X X5200A4M11W2 008505-XXX AL M25 Relay X X X5200S4N11W2 008506-XXX SS 3/4 NPT Relay X X X5200S4M11W2 008507-XXX SS M25 Relay X X X5200A4N14W1 008516-001 AL 3/4 NPT EQP X X X5200A4M14W1 008517-001 AL M25 EQP X X X5200S4N14W1 008518-001 SS 3/4 NPT EQP X X X5200S4M14W1 008519-001 SS M25 EQP X X X5200A4N14W2 008520-001 AL 3/4 NPT EQP X X X5200A4M14W2 008521-001 AL M25 EQP X X X5200S4N14W2 008522-001 SS 3/4 NPT EQP X X X5200S4M14W2 008523-001 SS M25 EQP X X X5200A4N15W1 008524-XXX AL 3/4 NPT Pulse/Relay X X X5200A4M15W1 008525-XXX AL M25 Pulse/Relay X X X5200S4N15W1 008526-XXX SS 3/4 NPT Pulse/Relay X X X5200S4M15W1 008527-XXX SS M25 Pulse/Relay X X X5200A4N15W2 008528-XXX AL 3/4 NPT Pulse/Relay X X X5200A4M15W2 008529-XXX AL M25 Pulse/Relay X X X5200S4N15W2 008530-XXX SS 3/4 NPT Pulse/Relay X X X5200S4M15W2 008531-XXX SS M25 Pulse/Relay X X X5200A4N24W1 008556-XXX AL 3/4 NPT Eagle Quantum X X X5200A4M24W1 008557-001 AL M25 Eagle Quantum X X X5200S4N24W1 008558-001 SS 3/4 NPT Eagle Quantum X X X5200S4M24W1 008559-001 SS M25 Eagle Quantum X X X5200A4N24W2 008560-001 AL 3/4 NPT Eagle Quantum X X X5200A4M24W2 008561-001 AL M25 Eagle Quantum X X X5200S4N24W2 008562-001 SS 3/4 NPT Eagle Quantum X X X5200S4M24W2 008563-001 SS M25 Eagle Quantum X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) X5200G UVIR Flame Detector - ATEX/IECEx/EN 54-10 The X5200G UVIR Flame Detector contains a Kr-85 free source tube. There are no differences in detection performance when compared to an X5200. Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d FM/CSA/ ATEX/IECEx X5200GA4N11E1 013244-XXX AL 3/4 NPT Relay X X X5200GA4M11E1 013245-XXX AL M25 Relay X X X5200GS4N11E1 013246-XXX SS 3/4 NPT Relay X X X5200GS4M11E1 013247-XXX SS M25 Relay X X X5200GA4N11E2 013248-XXX AL 3/4 NPT Relay X X X5200GA4M11E2 013249-XXX AL M25 Relay X X X5200GS4N11E2 013250-XXX SS 3/4 NPT Relay X X X5200GS4M11E2 013251-XXX SS M25 Relay X X X5200GA4N13E1 013252-XXX AL 3/4 NPT Relay/0-20 mA X X X5200GA4M13E1 013253-XXX AL M25 Relay/0-20 mA X X X5200GS4N13E1 013254-XXX SS 3/4 NPT Relay/0-20 mA X X X5200GS4M13E1 013255-XXX SS M25 Relay/0-20 mA X X X5200GA4N13E2 013256-XXX AL 3/4 NPT Relay/0-20 mA X X X5200GA4M13E2 013257-XXX AL M25 Relay/0-20 mA X X X5200GS4N13E2 013258-XXX SS 3/4 NPT Relay/0-20 mA X X X5200GS4M13E2 013259-XXX SS M25 Relay/0-20 mA X X X5200GA4N23E1 013260-XXX AL 3/4 NPT Rly/0-20/HART X X X5200GA4M23E1 013261-XXX AL M25 Rly/0-20/HART X X X5200GS4N23E1 013262-XXX SS 3/4 NPT Rly/0-20/HART X X X5200GS4M23E1 013263-XXX SS M25 Rly/0-20/HART X X X5200GA4N23E2 013264-XXX AL 3/4 NPT Rly/0-20/HART X X X5200GA4M23E2 013265-XXX AL M25 Rly/0-20/HART X X X5200GS4N23E2 013266-XXX SS 3/4 NPT Rly/0-20/HART X X X5200GS4M23E2 013267-XXX SS M25 Rly/0-20/HART X X X5200GA4N14E1 013268-001 AL 3/4 NPT EQP X X X5200GA4M14E1 013269-001 AL M25 EQP X X X5200GS4N14E1 013270-001 SS 3/4 NPT EQP X X X5200GS4M14E1 013271-001 SS M25 EQP X X X5200GA4N14E2 013272-001 AL 3/4 NPT EQP X X X5200GA4M14E2 013273-001 AL M25 EQP X X X5200GS4N14E2 013274-001 SS 3/4 NPT EQP X X X5200GS4M14E2 013275-001 SS M25 EQP X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) *The last 3 digits of the part number identify the software configuration. Please see table B1 to choose the correct option. The EQ and EQP detectors are completely configurable using the S3 configuration software and are shipped defaulted to the -001 setting. X5200G UVIR Flame Detector - CSA Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d CSA X5200GA4N13C1 013308-XXX AL 3/4 NPT Relay/0-20 mA X X X5200GA4N13C2 013312-XXX AL 3/4 NPT Relay/0-20 mA X X *The last 3 digits of the part number identify the software configuration. Please see table B1 to choose the correct option. The EQ and EQP detectors are completely configurable using the S3 configuration software and are shipped defaulted to the -001 setting. X5200M UVIR Flame Detector - Moly The X5200M UV/IR detector utilizes a molybdenum (moly) sensing element. Moly-based sensors have an increased spectral range of 1850 to 2650 angstroms, which is better suited for detecting substances with unusual chemistry and some black powders. Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d CSA X5200MA4N13W1 008540-013 AL 3/4 NPT Relay/0-20 mA X X X5200MA4M13W1 008541-013 AL M25 Relay/0-20 mA X X X5200MS4N13W1 008542-013 SS 3/4 NPT Relay/0-20 mA X X X5200MS4M13W1 008543-013 SS M25 Relay/0-20 mA X X X5200MA4N13W2 008544-013 AL 3/4 NPT Relay/0-20 mA X X X5200MA4M13W2 008545-013 AL M25 Relay/0-20 mA X X X5200MS4N13W2 008546-013 SS 3/4 NPT Relay/0-20 mA X X X5200MS4M13W2 008547-013 SS M25 Relay/0-20 mA X X X5200MA4N15W1 008548-013 AL 3/4 NPT Pulse/Relay X X X5200MA4M15W1 008549-013 AL M25 Pulse/Relay X X X5200MS4N15W1 008550-013 SS 3/4 NPT Pulse/Relay X X X5200MS4M15W1 008551-013 SS M25 Pulse/Relay X X X5200MA4N15W2 008552-013 AL 3/4 NPT Pulse/Relay X X X5200MA4M15W2 008553-013 AL M25 Pulse/Relay X X X5200MS4N15W2 008554-013 SS 3/4 NPT Pulse/Relay X X X5200MS4M15W2 008555-013 SS M25 Pulse/Relay X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) *The last 3 digits of the part number identify the software configuration. Please see table B1 to choose the correct option. X5200 UVIR Flame Detector / xWatch Camera Model Part Number * Material Threads Output Video FM/CSA X5200A3N33A2 009532-XXX AL 3/4 NPT Relay/0-20 NTSC X X5200A3M33A2 009533-XXX AL M25 Relay/0-20 NTSC X X5200S3N33A2 009534-XXX SS 3/4 NPT Relay/0-20 NTSC X X5200S3M33A2 009535-XXX SS M25 Relay/0-20 NTSC X X5200A3N43A2 009536-XXX AL 3/4 NPT Relay/0-20 PAL X X5200A3M43A2 009537-XXX AL M25 Relay/0-20 PAL X X5200S3N43A2 009538-XXX SS 3/4 NPT Relay/0-20 PAL X X5200S3M43A2 009539-XXX SS M25 Relay/0-20 PAL X X5200A3N34A2 009540-001 AL 3/4 NPT EQP NTSC X X5200A3M34A2 009541-001 AL M25 EQP NTSC X X5200S3N34A2 009542-001 SS 3/4 NPT EQP NTSC X X5200S3M34A2 009543-001 SS M25 EQP NTSC X X5200A3N44A2 009544-001 AL 3/4 NPT EQP PAL X X5200A3M44A2 009545-001 AL M25 EQP PAL X X5200S3N44A2 009546-001 SS 3/4 NPT EQP PAL X X5200S3M44A2 009547-001 SS M25 EQP PAL X Ship Weight: Aluminum = 9lb (4.1kg) Stainless Steel = 17.6lb (7.9kg) *The last 3 digits of the part number identify the software configuration. Please see table B1 to choose the correct option. The standard EQP detectors are completely configurable using the S3 software and are defaulted to the -001 setting. NOTES: 3 year warranty excludes xWatch camera. Models listed above come with a 2.3 mm lens on the camera, which emulates the 90° field of view of the flame detector. See section Flame F for additional lens options.
Det-Tronics X7050 xWatch Explosion-Proof Surveillance Camera

X7050 xWatch Explosion-Proof Surveillance Camera (Spec Sheet 90-1193) An explosion proof surveillance camera providing high-resolution color images of activity in the monitored area, which allows the capture and recording of fires and other activities on video. When a detector goes into alarm, the operator can immediately view the monitored area in real time and accurately assess the risk and location of the fire. The camera can be used with any video switcher or server for a live video feed and the output can be directed to a DVR or computer monitor. xWatch camera features: Easy connection to a video switcher using twisted pair wiring Existing wiring can be used in most applications FM, CSA, ATEX, and IECEx Three lens choices for field of view requirements Retrofit into a standard C7050 housing by simply replacing the tube module with the DE2020 camera module Three configurations are available: As a stand-alone device to perform typical CCTV functions Retrofitted into a C7050 Detector, replacing the UV tube module with the camera module Ordered as a combined unit with any of the X-Series Flame Detectors (see flame detector sections for specific models) - FM/CSA. X7050 Model Matrix MODEL DESCRIPTION X7050 xWatch Explosion-Proof Camera TYPE MATERIAL A Aluminum (AL) S Stainless Steel (SS) TYPE THREAD TYPE 1E 1/2" NPT 1F M20 TYPE VIDEO OUTPUT 50 NTSC 51 PAL TYPE FIELD OF VIEW 1 Wide FOV (90°), 2.3mm Lens* 2 Normal FOV (50°), 4.3mm Lens 3 Narrow FOV (30°), 8.0mm Lens TYPE APPROVALS W FM/CSA/ATEX/IECEx TYPE CLASSIFICATION 1 Division/Zone Ex d *This lens emulates the 90° field of view to match the X-Series Flame Detectors. X7050 xWatch Camera Model Part Number Material Threads FOV Output Ship Weight X7050A1E501W2 009580-001 AL 1/2 NPT 2.3mm NTSC 1.5 lb (0.7 kg) X7050A1E502W2 009580-002 AL 1/2 NPT 4.3mm NTSC 1.5 lb (0.7 kg) X7050A1E503W2 009580-003 AL 1/2 NPT 8.0mm NTSC 1.5 lb (0.7 kg) X7050A1F501W2 009581-001 AL M20 2.3mm NTSC 1.5 lb (0.7 kg) X7050A1F502W2 009581-002 AL M20 4.3mm NTSC 1.5 lb (0.7 kg) X7050A1F503W2 009581-003 AL M20 8.0mm NTSC 1.5 lb (0.7 kg) X7050S1E501W2 009582-001 SS 1/2 NPT 2.3mm NTSC 2.5 lb (1.2 kg) X7050S1E502W2 009582-002 SS 1/2 NPT 4.3mm NTSC 2.5 lb (1.2 kg) X7050S1E503W2 009582-003 SS 1/2 NPT 8.0mm NTSC 2.5 lb (1.2 kg) X7050S1F501W2 009583-001 SS M20 2.3mm NTSC 2.5 lb (1.2 kg) X7050S1F502W2 009583-002 SS M20 4.3mm NTSC 2.5 lb (1.2 kg) X7050S1F503W2 009583-003 SS M20 8.0mm NTSC 2.5 lb (1.2 kg) X7050A1E511W2 009584-001 AL 1/2 NPT 2.3mm PAL 1.5 lb (0.7 kg) X7050A1E512W2 009584-002 AL 1/2 NPT 4.3mm PAL 1.5 lb (0.7 kg) X7050A1E513W2 009584-003 AL 1/2 NPT 8.0mm PAL 1.5 lb (0.7 kg) X7050A1F511W2 009585-001 AL M20 2.3mm PAL 1.5 lb (0.7 kg) X7050A1F512W2 009585-002 AL M20 4.3mm PAL 1.5 lb (0.7 kg) X7050A1F513W2 009585-003 AL M20 8.0mm PAL 1.5 lb (0.7 kg) X7050S1E511W2 009586-001 SS 1/2 NPT 2.3mm PAL 2.5 lb (1.2 kg) X7050S1E512W2 009586-002 SS 1/2 NPT 4.3mm PAL 2.5 lb (1.2 kg) X7050S1E513W2 009586-003 SS 1/2 NPT 8.0mm PAL 2.5 lb (1.2 kg) X7050S1F511W2 009587-001 SS M20 2.3mm PAL 2.5 lb (1.2 kg) X7050S1F512W2 009587-002 SS M20 4.3mm PAL 2.5 lb (1.2 kg) X7050S1F513W2 009587-003 SS M20 8.0mm PAL 2.5 lb (1.2 kg) X7050 Spare Camera Modules Model Part Number FOV Output Ship Weight DE2020N 009448-003 2.3mm NTSC 5 oz. (0.14 kg) DE2020P 009448-004 2.3mm PAL 5 oz. (0.14 kg) DE2022N 009448-005 4.3mm NTSC 5 oz. (0.14 kg) DE2022P 009448-006 4.3mm PAL 5 oz. (0.14 kg) DE2023N 009448-007 8.0mm NTSC 5 oz. (0.14 kg) DE2023P 009448-008 8.0mm PAL 5 oz. (0.14 kg) X7050 Mounting Hardware Model Part Number Material Ship Weight Q9001B1175 002099-003 AL 0.5 lb (0.23 kg) Q9001H8001 004404-002 SS 1 lb (0.45 kg) X7050 Accessories Part Number Description Ship Weight 000499-132 Screw Terminal Balun, Active, converts single composite CCTV video signal from CAT-5 twisted pair wiring to BNC coaxial connector on DVR or video multiplexer, active type, suitable for distances over 750 ft (0.23 km) <1 lb (<0.45 kg) 000499-073 Screw Terminal Balun, Passive, converts single composite CCTV video signal from CAT-5 twisted pair wiring to BNC coaxial connector on DVR or video multiplexer, passive type, suitable for distances up to 750 ft (0.23 km) <1 lb (<0.45 kg)
Det-Tronics X9800 Single Frequency IR Flame Detector

The X9800 IR Flame Detector (Spec Sheet: 90-1160) meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The detector is equipped with dual signal processing (Quick Fire high speed operation and Time Domain Signal Analysis) and automatic/magnetic manual oi (optical integrity) test capability. The detector has Division and Zone explosion-proof ratings and is suitable for use in indoor and outdoor applications. The standard output configuration includes fire, fault, and auxiliary relays with RS-485 Modbus. Optional 0-20 mA, Pulse, Eagle Quantum Premier, or HART outputs are also available. A model with pulse output is available for easy retrofitting into existing Det-Tronics R74XX controller-based systems. The X9800 housing is available in aluminum or stainless steel, with NEMA/Type 4X and IP66/IP67 rating. Typical applications include: printing, petrochemical, automotive, and dirty environments. Models available with SIL 2 certification Unequaled false alarm rejection, TDSA Tricolor LED on detector faceplate indicates detector status condition Ultra High speed capability Heated optics for increased resistance to moisture and ice Automatic, manual, or magnetic oi testing Optional HART output and AMS aware Tricolor LED indicates normal operation, fire, and fault conditions FM, CSA, ATEX, and IECEx EN 54 part 10 certified by BRE, LPCB Mounting arm allows easy sighting Integral wiring compartment for ease of installation Terminal block allows for Class X Pathway Designation per NFPA 72 Meets NFPA 33 response requirement for under 0.5 seconds (available when model selected) Built-in data logging / event monitoring Models available with integral Explosion-proof camera option (xWatch) X9800 Model Matrix MODEL DESCRIPTION X9800 Single Frequency IR Flame Detector TYPE MATERIAL A Aluminum (AL) S Stainless Steel (SS) TYPE THREAD TYPE 3M 3 Port, M25* 3N 3 Port, 3/4" NPT* 4M 4 Port, M25 4N 4 Port, 3/4" NPT TYPE OUTPUTS 11 Relay 13 Relay and 0-20 mA 14 Eagle Quantum Premier 15 Relay and Pulse 16 Addressable Module Only (third-party type) 23† HART, Relay, and 0-20 mA 33 Relay and 0-20 mA / NTSC (xWatch) 34 Eagle Quantum Premier / NTSC (xWatch) 43 Relay and 0-20 mA / PAL (xWatch) 44 Eagle Quantum Premier / PAL (xWatch) TYPE APPROVALS‡ A FM/CSA R VNIIPO/VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx U TCCEX EE/UKRCEPRO (UKRAINE) W FM/CSA/ATEX/IECEx/ Y CHINA TYPE CLASSIFICATION 1 Division/Zone Ex d e 2 Division/Zone Ex d *3-port models only available with output types 33, 34, 43, and 44 (xWatch) † Type 23 Output - When HART output chosen detector does not have RS-485 communication available. ‡Type Approvals can use one or more letters to designate the approvals of the product. Table C1 - X9800 Software Part Number Configuration Matrix Dash IR Sensitivity Alarm Output IR Qualifications Alarm Relay Aux Output Function Aux Output IR Qualifications Aux Relay Alarm Relay -001 High TDSA De-Energized Non-latching Follows Alarm TDSA Energized Non-latching Energized Non-latching -002 High TDSA or Quick De-Energized Non-latching Follows Alarm TDSA or Quick Energized Non-latching Energized Non-latching -003 Very High TDSA or Quick De-Energized Non-latching Follows Alarm TDSA or Quick Energized Non-latching Energized Non-latching -004 Very High TDSA De-Energized Non-latching Follows Alarm TDSA Energized Non-latching Energized Non-latching -005 High TDSA or Quick De-Energized Non-latching Independent Quick Energized Non-latching Energized Non-latching -006 Low TDSA De-Energized Non-latching Follows Alarm TDSA Energized Non-latching Energized Non-latching -007 High TDSA De-Energized Latching Follows Alarm TDSA De-energized Latching Energized Non-latching -008 High TDSA or Quick De-Energized Latching Follows Alarm TDSA or Quick De-energized Latching Energized Non-latching -009 Very High TDSA or Quick De-Energized Latching Follows Alarm TDSA or Quick De-energized Latching Energized Non-latching -010 Very High TDSA De-Energized Latching Follows Alarm TDSA De-energized Latching Energized Non-latching -011 High TDSA or Quick De-Energized Latching Independent Quick De-energized Latching Energized Non-latching -012 Low TDSA De-Energized Latching Follows Alarm TDSA De-energized Latching Energized Non-latching -013 High Quick De-Energized Non-Latching Pre-Alarm None Energized Non-Latching Energized Non-latching TDSA = "Time Domain Signal Analysis" proprietary signal processing algorithm for superior IR false alarm rejection Quick = Signal processing for explosive IR events Application Guidelines The following criteria should be considered when choosing a sensitivity level for the intended application: Speed of response based on fuel type and fire size Distance between the hazard and the flame detector These are typical industry application settings. They may not be applicable to all installations. Contact factory for additional application guidance. Offshore 001 Compressor 002 High Speed 003 Powder Coating 013 Automotive 005 Printing 001 NOTE: Latching relays cannot be used in voted systems. X9800 Single Frequency IR Flame Detector - SIL 2 Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone FM/CSA/ ATEX/IECEx X9800A4N13T1 008800-XXX AL 3/4 NPT Relay/0-20 mA X X X9800A4M13T1 008801-XXX AL M25 Relay/0-20 mA X X X9800S4N13T1 008802-XXX SS 3/4 NPT Relay/0-20 mA X X X9800S4M13T1 008803-XXX SS M25 Relay/0-20 mA X X X9800A4N13T2 008804-XXX AL 3/4 NPT Relay/0-20 mA X X X9800A4M13T2 008805-XXX AL M25 Relay/0-20 mA X X X9800S4N13T2 008806-XXX SS 3/4 NPT Relay/0-20 mA X X X9800S4M13T2 008807-XXX SS M25 Relay/0-20 mA X X X9800A4N23T1 008808-XXX AL 3/4 NPT Rly/0-20/HART X X X9800A4M23T1 008809-XXX AL M25 Rly/0-20/HART X X X9800S4N23T1 008810-XXX SS 3/4 NPT Rly/0-20/HART X X X9800S4M23T1 008811-XXX SS M25 Rly/0-20/HART X X X9800A4N23T2 008812-XXX AL 3/4 NPT Rly/0-20/HART X X X9800A4M23T2 008813-XXX AL M25 Rly/0-20/HART X X X9800S4N23T2 008814-XXX SS 3/4 NPT Rly/0-20/HART X X X9800S4M23T2 008815-XXX SS M25 Rly/0-20/HART X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) *The last 3 digits of the part number identify the software configuration. Please see table C1 to choose the correct option. The EQP detectors are completely configurable using the S3 configuration software and are shipped defaulted to the -001 setting. X9800 Single Frequency IR Flame Detector Model Part Number * Material Threads Output Div/Zone Ex d e Div/Zone Ex d FM/CSA/ ATEX/IECEx X9800A4N11W1 008700-XXX AL 3/4 NPT Relay X X X9800A4M11W1 008701-XXX AL M25 Relay X X X9800S4N11W1 008702-XXX SS 3/4 NPT Relay X X X9800S4M11W1 008703-XXX SS M25 Relay X X X9800A4N11W2 008704-XXX AL 3/4 NPT Relay X X X9800A4M11W2 008705-XXX AL M25 Relay X X X9800S4N11W2 008706-XXX SS 3/4 NPT Relay X X X9800S4M11W2 008707-XXX SS M25 Relay X X X9800A4N14W1 008716-001 AL 3/4 NPT EQP X X X9800A4M14W1 008717-001 AL M25 EQP X X X9800S4N14W1 008718-001 SS 3/4 NPT EQP X X X9800S4M14W1 008719-001 SS M25 EQP X X X9800A4N14W2 008720-001 AL 3/4 NPT EQP X X X9800A4M14W2 008721-001 AL M25 EQP X X X9800S4N14W2 008722-001 SS 3/4 NPT EQP X X X9800S4M14W2 008723-001 SS M25 EQP X X X9800A4N15W1 008724-XXX AL 3/4 NPT Pulse/Relay X X X9800A4M15W1 008725-XXX AL M25 Pulse/Relay X X X9800S4N15W1 008726-XXX SS 3/4 NPT Pulse/Relay X X X9800S4M15W1 008727-XXX SS M25 Pulse/Relay X X X9800A4N15W2 008728-XXX AL 3/4 NPT Pulse/Relay X X X9800A4M15W2 008729-XXX AL M25 Pulse/Relay X X X9800S4N15W2 008730-XXX SS 3/4 NPT Pulse/Relay X X X9800S4M15W2 008731-XXX SS M25 Pulse/Relay X X Ship Weight: Aluminum = 7lb (3.2kg) Stainless Steel = 14.6lb (6.7kg) *The last 3 digits of the part number identify the software configuration. Please see table C1 to choose the correct option. The EQP detectors are completely configurable using the S3 configuration software and are shipped defaulted to the -001 setting. X9800 Single Frequency IR Flame Detector / xWatch Camera Model Part Number * Material Threads Output Video FM/CSA X9800A3N33A2 009548-XXX AL 3/4 NPT Relay/0-20 NTSC X X9800A3M33A2 009549-XXX AL M25 Relay/0-20 NTSC X X9800S3N33A2 009550-XXX SS 3/4 NPT Relay/0-20 NTSC X X9800S3M33A2 009551-XXX SS M25 Relay/0-20 NTSC X X9800A3N43A2 009552-XXX AL 3/4 NPT Relay/0-20 PAL X X9800A3M43A2 009553-XXX AL M25 Relay/0-20 PAL X X9800S3N43A2 009554-XXX SS 3/4 NPT Relay/0-20 PAL X X9800S3M43A2 009555-XXX SS M25 Relay/0-20 PAL X X9800A3N34A2 009556-001 AL 3/4 NPT EQP NTSC X X9800A3M34A2 009557-001 AL M25 EQP NTSC X X9800S3N34A2 009558-001 SS 3/4 NPT EQP NTSC X X9800S3M34A2 009559-001 SS M25 EQP NTSC X X9800A3N44A2 009560-001 AL 3/4 NPT EQP PAL X X9800A3M44A2 009561-001 AL M25 EQP PAL X X9800S3N44A2 009562-001 SS 3/4 NPT EQP PAL X X9800S3M44A2 009563-001 SS M25 EQP PAL X Ship Weight: Aluminum = 9lb (4.1kg) Stainless Steel = 17.6lb (7.9kg) *The last 3 digits of the part number identify the software configuration. Please see table C1 to choose the correct option. The standard EQP detectors are completely configurable using the S3 software and are defaulted to the -001 setting. NOTES: 3 year warranty excludes xWatch camera. Models listed above come with a 2.3 mm lens on the camera, which emulates the 90° field of view of the flame detector. See section Flame F for additional lens options.
Det-Tronics C7050B UV Flame Detector

C7050B UV Flame Detector (Manual: 95-8214) combined with the EQ2200UVHT (95-8570) on an Eagle Quantum Premier system (or as a replacement on legacy Eagle Quantum provides fast, reliable flame detection in a wide variety of applications. The detector has the Automatic oi (optical integrity) feature, providing a continuous check of detector optical surfaces, detector sensitivity, and electronic circuitry of the detector/controller system. Not recommended for applications where welding or lightning may be present. Replaceable tube module Automatic oi High temperature, 125°C continuous duty Variable sensitivities configurable via S3 FM, CSA, ATEX, and IECEx C7050B Model Matrix MODEL DESCRIPTION C7050B Controller Based UV Flame Detector TYPE MATERIAL A Aluminum (AL) S Stainless Steel (SS) TYPE THREAD TYPE 6 1 Port TYPE THREAD TYPE E 1/2" NPT F M20 TYPE OUTPUTS 4 Pulse (Standard) TYPE TUBE MODULE OPTION E DE1888K3 (High Temperature for UVHT) TYPE OPTIONS 1H Operating Temperature 125° C TYPE APPROVAL TYPE 1 Explosion-Proof TYPE APPROVALS E ATEX/IECEx A FM/CSA C7050B Ultraviolet Flame Detectors (ATEX/IECEx) Model Part Number Material Conduit Entry Tube Module ATEX/IECEx Ship Weight C7050BS6F4E1H1E 006899-040 SS M20 DE1888K3 X 2.2 lb (1.0 kg) C7050 LENS CAP/BODY 008054-001 SS N/A N/A X 1 lb (0.45 kg) C7050B Ultraviolet Flame Detectors (FM/CSA) Model Part Number Material Conduit Entry Tube Module FM/CSA Ship Weight C7050BA6E4E1H1A 006899-037 AL 1/2 NPT DE1888K3 X 1.2 lb (0.6 kg) C7050BS6E4E1H1A 006899-038 SS 1/2 NPT DE1888K3 X 2.2 lb (1.0 kg) C7050BA6F4E1H1A 006899-039 AL M20 DE1888K3 X 1.2 lb (0.6 kg) C7050 LENS CAP/BODY 004907-021 AL N/A N/A X <1 lb (<0.45 kg) C7050 LENS CAP/BODY 004907-022 SS N/A N/A X 1 lb (0.45 kg) High temperature rating - continuous duty at 125° Celsius, for environments that normally exceed 75° Celsius operation. EQP UVHT Electronic Module* Model Part Number Enclosure Material Conduit Entry Tube Module FM/CSA/ ATEX/ IECEx Ship Weight EQ2253UVHT* 007082-001 AL 3/4" NPT N/A X 4.0 lb (1.8 kg) EQ2207UVHT* 007082-002 AL M25/M20 N/A X 4.0 lb (1.8 kg) EQ2263UVHT* 007082-003 SS 3/4" NPT N/A X 9.5 lb (4.3 kg) EQ2217UVHT* 007082-004 SS M25/M20 N/A X 9.5 lb (4.3 kg) *One (1) Electronic Module (EQxxxxUVHT) is required for use with each C7050B Detector
Det-Tronics C7064E Sensor/Transmitter

C7064E Sensor/Transmitter (Spec Sheet: 90-1079) housing. Two-wire, stainless steel or aluminum toxic gas detector with 3/4” NPT or 20 mm threads. Purchase EC cell separately for monitoring H2S toxic gases. 4-20 mA output is proportional to EC cell measurement range Electrochemical cell sold separately For use with: - FlexVu UD10 Universal Display - U9500 Infiniti Transmitter - STB Sensor Termination Box - DCU Digital Communication Unit - R8471X Toxic Controller Optional measurement ranges available for H2S versions Hydrophobic filter provided on C7064E housings –40°C to 75°C hazardous location temperature rating C7064E H2S Electrochemical Sensor Housings (sensor sold separately) Model Part Number Toxic Gas Enclosure Threads Enclosure Material Measurement Range Approvals Other C7064E4012 004539-009 Hydrogen Sulfide 3/4 NPT SS All FM/CSA Groups C, D C7064E5012 004539-102 Hydrogen Sulfide M20 SS All FM/CSA Groups C, D C7064E6031 004539-103 Hydrogen Sulfide M20 SS All CSA Groups C, D C7064E5014 004539-105 Hydrogen Sulfide 3/4 NPT SS All FM/CSA Groups B, C, D Note: All C7064E housings above require an electrochemical sensor cell (not included) for proper operation. Shipping weight of all C7064E gas detector housings is 2.5 lbs (1.28 kg)
Det-Tronics CGS Accessories: Rain Shields, Splash Guards, Dust Covers, Remote Calibration Cups

Rain Shields (Spec Sheet: 90-1046) protect combustible sensors from rain and snow. Splash Guards (Spec Sheet: 90-1046) protect combustible sensors from ingress due to rain or splashing water. Dust Covers (Spec Sheet: 90-1046) are recommended to protect sensors in windy, dusty, and oily environments. Porex and stainless steel filters available. Remote Calibration cups provide the means to apply calibration to a CGS gas sensor from a remote location. Tubing not included. Options include barbed fitting or ¼” compression fitting. NOTE: Only one accessory recommended to be fitted per catalytic sensor. Rain Shields Part Number Material Ship Weight 226349-001 AL 6 oz (0.17 kg) Splash Guard Part Number Material Ship Weight 006491-001 AL 2 lb (0.95 kg) Dust Covers Part Number Material Ship Weight 225312-001 SS 2 oz (0.06 kg) 226190-001 Porex* 2 oz (0.06 kg) *Porex not recommended for outdoors or temperatures above 75°C Remote Calibration Cups Part Number Use Filter Material Tube Fitting Type Ship Weight 225777-001 Indoor Porex* Barbed 0.5 lb (0.14 kg) 004996-001 Indoor Porex* Compression 0.5 lb (0.14 kg) 006618-001 Outdoor SS Screen Barbed 0.5 lb (0.14 kg) 006618-002 Outdoor SS Screen Compression 0.5 lb (0.14 kg) *Porex not recommended for outdoors or temperatures above 75°C.
Det-Tronics CGS Combustible Gas Certified Calibration Kits

Combustible Gas Certified Calibration Kits (Spec Sheet: 90-1059) for combustible gas sensors. Kits include sturdy plastic carrying case containing: Two 3.6 ft3 (103 liters) cylinders of Class 2.2 non-flammable, non-toxic compressed gas Regulator/shutoff valve with gauge, 3-foot tubing and stainless steel CGS calibration cup Regulator provides fixed flow rate of 1 liter per minute designed for CGS sensors 3-foot tube Sturdy plastic carrying case Calibration Kits for CGS Catalytic Sensor Part Number Gas LFL % Vol Standard Balance Ship Weight 225130-002 Ethane 50% 1.5 ISO Air 11.5 lb (5.23 kg) 225130-902* Ethane 50% 1.5 ISO Air 11.5 lb (5.23 kg) 225130-003 Ethylene 50% 1.35 ISO Air 11.5 lb (5.23 kg) 225130-005 Hydrogen 50% 2.0 ISO Air 11.5 lb (5.23 kg) 225130-905* Hydrogen 50% 2.0 ISO Air 11.5 lb (5.23 kg) 225130-006 Methane 20% 1.0 ISO Air 11.5 lb (5.23 kg) 225130-007 Methane 25% 1.25 ISO Air 11.5 lb (5.23 kg) 225130-008 Methane 35% 1.75 ISO Air 11.5 lb (5.23 kg) 225130-014 Methane 50% 2.2 IEC Air 11.5 lb (5.23 kg) 225130-914* Methane 50% 2.2 IEC Air 11.5 lb (5.23 kg) 225130-001 Methane 50% 2.5 ISO Air 11.5 lb (5.23 kg) 225130-901* Methane 50% 2.5 ISO Air 11.5 lb (5.23 kg) 225130-015 Propane 50% 0.85 IEC Air 11.5 lb (5.23 kg) 225130-915* Propane 50% 0.85 IEC Air 11.5 lb (5.23 kg) 225130-004 Propane 50% 1.1 ISO Air 11.5 lb (5.23 kg) 225130-009 Empty kit–no cal gas 10 lb (4.6 kg) *These items are certified for Russian projects. NOTE: Average lead time is 2-3 weeks Replacement Gas Cylinders for Combustible Gas Calibration Kits Part Number Gas %LFL % Vol Standard Balance Ship Weight 226166-006 Zero Air N/A 20.9 N/A Nitrogen 1.5 lb (0.7 kg) 226166-002 Ethane 50% 1.5 ISO Air 1.5 lb (0.7 kg) 226166-902* Ethane 50% 1.5 ISO Air 1.5 lb (0.7 kg) 226166-003 Ethylene 50% 1.35 ISO Air 1.5 lb (0.7 kg) 226166-005 Hydrogen 50% 2.0 ISO Air 1.5 lb (0.7 kg) 226166-905* Hydrogen 50% 2.0 ISO Air 1.5 lb (0.7 kg) 226166-007 Methane 20% 1.0 ISO Air 1.5 lb (0.7 kg) 226166-008 Methane 25% 1.25 ISO Air 1.5 lb (0.7 kg) 226166-009 Methane 35% 1.75 ISO Air 1.5 lb (0.7 kg) 226166-014 Methane 50% 2.2 IEC Air 1.5 lb (0.7 kg) 226166-914* Methane 50% 2.2 IEC Air 1.5 lb (0.7 kg) 226166-001 Methane 50% 2.5 ISO Air 1.5 lb (0.7 kg) 226166-901* Methane 50% 2.5 ISO Air 1.5 lb (0.7 kg) 226166-015 Propane 50% 0.85 IEC Air 1.5 lb (0.7 kg) 226166-915* Propane 50% 0.85 IEC Air 1.5 lb (0.7 kg) 226166-004 Propane 50% 1.1 ISO Air 1.5 lb (0.7 kg) 226166-010 Propylene 50% 1.2 ISO Air 1.5 lb (0.7 kg) *These items are certified for Russian projects. Replacement Kit Replacement Parts Part Number Description Ship Weight 004976-001 Standard calibration cup, SS 8 oz (0.23 kg) 101678-007 Tubing, 3 ft. 8 oz (0.23 kg) 101678-013 Tubing, 100 ft. spool 8 oz (0.23 kg) 162552-001 1 LPM Regulator for CGS sensors 8 oz (0.23 kg) 162553-001 Carrying Case 8 oz (0.23 kg)
Det-Tronics CGS Combustible Gas Sensor

CGS Combustible Gas Sensor (Spec Sheet: 90-1041). Stainless steel catalytic sensor that provides an accurate measurement of combustible gas concentration in the % LFL range. Requires FlexVu UD10, Model 505, U9500A or DCUEX transmitter. Compliance to ANSI/ISA-12.13.01-2000 performance standard Performance certified to FM 6310/6320, CSA 22.2 #154, and ATEX EN60079-29-1 Performance certified to IEC60079-29-1 when connected to the FlexVu UD10, UD10-DCU Detects hydrogen and hydrocarbon gases Constant current or constant voltage options available Poison resistant construction 3/4” NPT or 20 mm thread option Wire lead options of 6” or 30” Sensor Separation Termination Box (STB) option available Variety of special accessories available FlexVu UD10 universal display provides full digital readout, calibration and user interface Performance approved from –40°C to 75°C for life safety applications Hazardous Location approved from –55°C to 125°C for process control applications SIL2 certified when used with FlexVu UD10 Universal Display Combustible Gas Sensor for Models 505, 500, and K-Series Transmitters Model Part Number Replaces old catalytic sensor p/n Threads Lead Length FM/CSA/ATEX/IECEx Russia CGSS1A6V2R1X 006824-002 225006-002, 225957-001, 226530-001, 226531-001, 226931-001, 226931-002, 226999-002, 226999-004,223106-002 3/4 NPT 6 in X CGSS1A3V2R1X 006824-006 225006-005, 226530-004, 226531-002, 226931-003, 226931-004 3/4 NPT 30 in X CGSS1C3V2R1X 006824-008 M20 30 in X CGSS1C6V2R1X 006824-004 226999-010, 226999-013, 226999-018, 226999-019 M20 6 in X CGSS1C6V2R1R 006824-904 M20 6 in X Shipping Weight = 1 lb. (0.45 kg) NOTES: CGS sensors always require a transmitter (sold separately). Constant voltage Combustible Gas Sensor for UD10, DCUEX, U9500A, U8700, 400, 405, 810, 820, and 880 Transmitters Model Part Number Replaces old catalytic sensor p/n Threads Lead Length FM/CSA/ATEX/IECEx Russia Brazil CGSS1A6C2R1X 006824-001 225006-004, 225957-002, 226530-003, 226531-003, 226931-005, 226931-006, 226999-011, 226999-012 3/4 NPT 6 in X CGSS1A6C2R1B 006824-101 225006-003, 226530-005, 226531-004, 226931-007, 226931-008 3/4 NPT 6 in X CGSS1A3C2R1X 006824-005 3/4 NPT 30 in X CGSS1C3C2R1X 006824-007 225006-003, 226530-005, 226531-004, 226931-007, 226931-008 M20 30 in X CGSS1C6C2R1X 006824-003 226999-008, 226999-020, 226999-014, 226999-021 M20 6 in X CGSS1C6C2R1R 006824-903 M20 6 in X Shipping Weight = 1 lb. (0.45 kg) NOTES: CGS sensors always require a transmitter (sold separately). Constant current
Det-Tronics Duct Mount and Sample Draw Assemblies for CGS

Direct Duct Mount Assembly (Spec Sheet: 90-1046). For mounting combustible sensors to air handling duct work. The Direct Duct Mount CGS assembly enables combustible gas detection in air handling, heating, ventilating, and air conditioning ducts. Designed for flat surface mounting only. Seal gaskets provided to prevent leakage Circular duct wall cutout required Positive pressure ducts only Calibration gas inlet enables in-situ calibration Flexible conduit/cabling recommended to enable sensor removal from assembly Model Q811 Duct Mount Enclosure (Manual: 95-8459) The Q811 provides combustible gas detection in air handling, heating, ventilating, and air conditioning ducts. Designed for flat surface mounting only Stainless steel NEMA 4X enclosure 316 Stainless steel enclosure and sample inlet tube spans the duct’s cross section 1 foot outlet tube returns the sample Requires a 600–4000 fpm velocity Sample Draw Cup Assembly for CGS. The Sample Draw cup assembly for CGS provides a sealed enclosure with compression fittings to enable the CGS to be used as part of an extractive gas sampling system. Aluminum enclosure with seals provides airtight flow chamber Brass compression fittings accept 1/4” OD tubing Threaded cover enables sensor removal Sampling system hardware required for proper operation Direct Duct Mount Assemblies for CGS Part Number Material Ship Weight 226846-001 AL 6 oz (0.17 kg) 226846-008 SS 1 lb (0.46 kg) Model Q811 CGS Duct Mount Enclosure Part Number Material Ship Weight Thread 000811-106 SS 10 lb (4.5 kg) M20 000811-105 SS 1 lb (0.46 kg) 3/4" NOTE: 1 inlet and 1 outlet tube included at no extra cost. Specify length of inlet tube at time of order (1, 3, 6, 10 or 13 ft). Q811 Spare Parts Part Number Description Length Material Ship Weight 000214-281 Inlet Tube 1 ft (0.3 m) 316 SS 8 oz (0.23 kg) 000214-282 Inlet Tube 3 ft (0.9 m) 316 SS 1 lb (0.45 kg) 000214-283 Inlet Tube 6 ft (1.8 m) 316 SS 3 lb (1.35 kg) 000214-284 Inlet Tube 10 ft (3.1 m) 316 SS 6 lb (2.4 kg) 000214-285 Inlet Tube 13 ft (4 m) 316 SS 9 lb (4.0 kg) 000214-419 Inlet Tube 15 ft (4.6 m) 316 SS 11 lb (5.0 kg) 000214-280 Outlet Tube 1 ft (0.3 m) 316 SS 8 oz (0.23 kg) 102359-001 Stopper Plug N/A Rubber <1 lb (<0.45 kg) Sample Draw Cup Assembly for CGS Part Number Material Ship Weight 009171-001 AL 1 lb (0.45 kg)
Det-Tronics Electrochemical Sensor Cells for use with Model C7064E housings

Electrochemical sensor cells are provided for use with the C7064E (Spec Sheet: 90-1079) gas detector housings. All sensors are shipped in a sealed bag. Store in a cool, dry place until installation/commissioning is required. H2S Electrochemical Sensor Cell Part Number Toxic Gas Measurement Range (PPM) 005434-003 Hydrogen Sulfide 0-20 005434-004 Hydrogen Sulfide 0-50 005434-002 Hydrogen Sulfide 0-100 Shipping weight for sensor cells is 2 oz. (.1 kg) C7064E Calibration Gas Kits Part Number Concentration Gas Balance Ship Weight 227115-001 50 ppm Hydrogen Sulfide Nitrogen 11.5 lb (5.23 kg) 227115-002 20 ppm Hydrogen Sulfide Nitrogen 11.5 lb (5.23 kg) 227115-014 10 ppm Hydrogen Sulfide Nitrogen 11.5 lb (5.23 kg) 227115-015 25 ppm Hydrogen Sulfide Nitrogen 11.5 lb (5.23 kg) 227115-008 Empty kit - no cal gas 8.5 lb (3.9 kg) C7064E Calibration Gas Kit Replacement Cylinders Part Number Concentration Gas Balance Ship Weight 227117-001 50 ppm Hydrogen Sulfide Nitrogen 1.5 lb (0.7 kg) 227117-002 20 ppm Hydrogen Sulfide Nitrogen 1.5 lb (0.7 kg) 227117-011 10 ppm Hydrogen Sulfide Nitrogen 1.5 lb (0.7 kg) 227117-012 25 ppm Hydrogen Sulfide Nitrogen 1.5 lb (0.7 kg) C7064E Calibration Kit Replacement Parts Part Number Description Ship Weight 005964-001 C7064E Calibration cup 8 oz (0.23 kg) 101678-007 Tubing, 3 ft. 8 oz (0.23 kg) 101678-013 Tubing 100 ft. spool 8 oz (0.23 kg) 107427-084 C7064E Calibration cup O-ring 8 oz (0.23 kg) 162552-001 Regulator, 1 LPM 8 oz (0.23 kg) 162553-001 Carrying Case 8 oz (0.23 kg)
Det-Tronics EQ2200UVHT and C7050 Detector

EQ2200UVHT (Manual: 95-8570) combined with the C7050 Detector (Manual: 95-8214) on an EQP (or as a replacement on an older EQ system) provides fast, reliable flame detection in a wide variety of applications. The detector has the Automatic oi (optical integrity) feature, providing a continuous check of detector optical surfaces, detector sensitivity, and electronic circuitry of the detector/controller system. Not recommended for applications where welding or lightning may be present. For large fixed installations only. Replaceable tube module External Automatic oi Internal Automatic oi Standard temperature option High temperature option, 125°C continuous duty Variable sensitivities available to match hazard FM, CSA, ATEX, CE C7050 Model Matrix MODEL DESCRIPTION C7050B Controller Based UV Flame Detector TYPE MATERIAL A Aluminum S Stainless Steel (316) TYPE 6 1 Port TYPE THREAD TYPE E 1/2" NPT F M20 TYPE OUTPUTS 4 Pulse (Standard) TYPE TUBE MODULE OPTION E DE1888K3 (High Temperature for UVHT) TYPE OPTIONS 1H Operating Temperature 125° C TYPE APPROVAL TYPE 1 Explosion-Proof TYPE APPROVALS E ATEX/IECEx A FM/CSA C7050B Ultraviolet Flame Detectors (ATEX/IECEx) Model Part Number Enclosure Material Conduit Entry Tube Module ATEX/ IECEx Ship Weight C7050BS6F4E1H1E 006899-040 SS M20 DE1888K3 X 2.2 lb (1.0 kg) C7050 LENS CAP/BODY 008054-001 SS N/A N/A X 1 lb (0.45 kg) High temperature rating - continuous duty at 125° Celsius, for environments that normally exceed 75° Celsius operation. C7050B Ultraviolet Flame Detectors (FM/CSA) Model Part Number Enclosure Material Conduit Entry Tube Module FM/CSA Ship Weight C7050BA6E4E1H1A 006899-037 AL 1/2" NPT DE1888K3 X 1.2 lb (0.6 kg) C7050BS6E4E1H1A 006899-038 SS 1/2" NPT DE1888K3 X 2.2 lb (1.0 kg) C7050BA6F4E1H1A 006899-039 AL M20 DE1888K3 X 1.2 lb (0.6 kg) C7050 LENS CAP/BODY 004907-021 AL N/A N/A X <1 lb (<0.45 kg) C7050 LENS CAP/BODY 004907-022 SS N/A N/A X 1 lb (0.45 kg) High temperature rating - continuous duty at 125° Celsius, for environments that normally exceed 75° Celsius operation. EQP UVHT Electronic Module* Model Part Number Enclosure Material Conduit Entry Tube Module FM/CSA/ ATEX/ IECEx Ship Weight EQ2253UVHT* 007082-001 AL 3/4" NPT N/A X 4.0 lb (1.8 kg) EQ2207UVHT* 007082-002 AL M25/M20 N/A X 4.0 lb (1.8 kg) EQ2263UVHT* 007082-003 SS 3/4" NPT N/A X 9.5 lb (4.3 kg) EQ2217UVHT* 007082-004 SS M25/M20 N/A X 9.5 lb (4.3 kg) DE6598-002 006598-002 Module only 2.5 lb (1.2 kg) *One (1) Electronic Module (EQxxxxUVHT) is required for use with each C7050B Detector
Det-Tronics EQ2400NE Network Extender

EQ2400NE Network Extender (Spec Sheet: 90-1132) expands the capabilities of the Eagle Quantum Premier system by allowing additional nodes as well as additional wiring to be added to the LON communication loop. Without a network extender, the communication network is limited to 60 nodes on a 2,000 meter loop. Each network extender increases the capacity of the loop by 40 nodes and an additional 2,000 meters of wiring. The maximum system size is 246 field nodes and 10,000 meters of wiring. To ensure optimum performance, it is important to distribute the network extenders along the loop so that no more than 40 nodes or 2,000 meters of wiring are on either side of a network extender. Network extender circuitry supports communication in both directions. If a network fault should occur, uninterrupted communication can continue in the opposite direction. Increases network capacity by 40 nodes per unit (system maximum = 246) Each extender increases wiring length by 2,000 meters Visual indication of network traffic Up to 6 extenders can be added per system EQ24xxNE - Network Extender Model Part Number Material Thread Ports FM/CSA/ATEX Ship Weight EQ2453NE 006941-009 AL 3/4 NPT 5 X 6 lb (2.7 kg) EQ2408NE 006941-007 AL 3/4 NPT 6 X 6 lb (2.7 kg) EQ2407NE 006941-003 AL M25/M20 5 X 6 lb (2.7 kg) EQ2409NE 006941-008 AL M25/M20 6 X 6 lb (2.7 kg) EQ2463NE 006941-010 SS 3/4 NPT 5 X 10 lb (4.5 kg) EQ2417NE 006941-006 SS M25/M20 5 X 10 lb (4.5 kg)
Det-Tronics EQ2400PLR Physical Layer Repeater

EQ2400PLR Physical Layer Repeater (spec sheet 90-XXXX) is a repeater module that is connected between two network segments. A network segment is defined as the segment between two network extenders or the segment between an EQP controller and a network extender. The purpose of the physical layer repeater is to eliminate communication interference resulting from network wiring opens caused by a break in the wire or a bad connection. An open wire will result in the reflection of the network signal back along the network wiring segment. This interference has the potential to cause a network device to fault isolate. This will occur at a device located at a certain distance from the network open. Typically the distance lies between 350 and 500 meters and is dependent upon the electrical characteristics of the network cable. Suppresses reflection Amplifies signal EQ24XX PLR Physical Layer Repeater Model Part Number Material Thread Ports FM/CSA/ATEX Ship Weight EQ2453PLR 009183-001 AL 3/4 NPT 5 X 6 lb (2.7 kg) EQ2457PLR 009183-002 AL M25/M20 6 X 6 lb (2.7 kg) EQ2463PLR 009183-003 SS 3/4 NPT 5 X 10 lb (4.5 kg) EQ2467PLR 009183-004 SS M25/M20 5 X 10 lb (4.5 kg) EQ24EMPLR 009183-005 1 lb (0.46 kg)
Det-Tronics EQ3700 DCIO Discrete Input/Output Module

EQ3700 DCIO Input/Output Module (Spec Sheet: 90-1149) The 8 Channel DC I/O Module is specially designed to expand the Input and Output (I/O) capability of the Det-Tronics Eagle Quantum Premier System. The unit is designed to provide continuous and automated fire/gas protection while ensuring system operation through continuous supervision of system I/O and signaling line circuit (SLC). The DCIO module provides eight channels of configurable I/O points that can be programmed for supervised or unsupervised operation. Each input point can accept fire detection devices such as heat, smoke, or unitized flame detectors. Each output point can be configured for signaling or releasing output operation. Each channel on the module is provided with individual indicators for active and fault conditions. Monitors eight independent I/O channels IDC Class B wiring Class 1 Div. 2 locations combined with Zone 2 rated devices Type N Individual channels are configurable as an Input or Output Individual point Style is configurable as a supervised or an unsupervised point Individual point Type is configurable for alarm/supervisory/other input styles, notification/releasing/dry contact output Meets the requirements of NFPA 72 Panel or DIN rail mounting EQ3700 DCIO Model Matrix MODEL DESCRIPTION EQ3700 8 Channel Discrete Input/Output Module (DCIO) TYPE MOUNTING OPTION D Din Rail P Panel TYPE APPROVALS R VNIIPO/VNIIFTRI (RUSSIA) W FM/CSA/ATEX/IECEx EQ3700 DCIO Module Model Part Number Material FM/CSA/ ATEX/IECEx Ship Weight EQ3700PW 007371-002 AL X 1.0 lb (0.45 kg) EQ3700DW 007371-003 AL X 2.0 lb (0.90 kg)
Det-Tronics EQ3710 AIM Analog Input Module

EQ3710 AIM Analog Input Module (Spec Sheet: 90-1183). The 8 Channel Analog Input Module expands the input capability of the Det-Tronics Eagle Quantum Premier System. The unit provides a means of connecting devices with a 4-20 mA output signal to the Eagle Quantum Premier System. Each channel is fully configurable to provide device and alarm information. This information includes tag name, descriptor, engineering units, fault alarm, low/high alarm, and alarm threshold limits. Compliance to ANSI/ISA-12.13.01, for combustible gas Compliance to ANSI/ISA 92.0.01, CSA 22.2 #152, and EN60079-29-1 NFPA 72 Approved 4-20 mA flame detector input Class 1 Div. 2 locations combined with Zone 2 rated devices Type N Models with SIL 2 certification Monitors eight independent channels Panel or DIN rail mounting Optional HART Interface module (HIM) available Supports 2 or 3 wire 4-20 mA transmitters EQ3710 AIM Model Matrix MODEL DESCRIPTION EQ3710 8 Channel Analog Input Module (AIM) TYPE MOUNTING OPTION D Din Rail P Panel TYPE APPROVALS R VNIIPO/VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx W FM/CSA/ATEX/IECEx *Type Approvals can use one or more letters to designate the approvals of the product. EQ3710 AIM - SIL 2 Model Part Number Material SIL/FM/CSA/ ATEX/IECEx Ship Weight EQ3710DT 007918-013 AL X 2.0 lb (0.90 kg) EQ3710PT 007918-012 AL X 1.0 lb (0.45 kg) EQ3710 AIM Model Part Number Material FM/CSA/ ATEX/IECEx Ship Weight EQ3710DW 007918-003 AL X 2.0 lb (0.90 kg) EQ3710PW 007918-002 AL X 1.0 lb (0.45 kg)
Det-Tronics EQ3720 RM Relay Module

EQ3720 RM Relay Module (Spec Sheet: 90-1181) The 8 Channel Relay Module is specially designed to expand the output capability of the Det-Tronics Eagle Quantum Premier System. The Relay Module provides eight channels of relay output points that are programmed for unsupervised operation. The output relays are rated up to 2 amps per channel at 30 Vdc maximum or 0.5 amps per channel at 30 Vac. Class 1 Div. 2 locations combined with Zone 2 rated devices Type N Controls eight independent form “C” relay output channels Panel or DIN rail mounting “Hold last state” capable Recommended for use as an interface to normally energized (fail-safe) systems EQ3720 RM Model Matrix MODEL DESCRIPTION EQ3720 8 Channel Relay Module (RM)) TYPE MOUNTING OPTION D Din Rail P Panel TYPE APPROVALS R VNIIPO/VNIIFTRI (RUSSIA) W FM/CSA/ATEX/IECEx EQ3720 Relay Module Model Part Number Material FM/CSA/ ATEX/IECEx Ship Weight EQ3720DW 007792-003 AL X 2.0 lb (0.90 kg) EQ3720PW 007792-002 AL X 1.0 lb (0.45 kg)
Det-Tronics EQ3730 EDIO Enhanced Discrete Input/Output Module

EQ3730 EDIO Enhanced Discrete Input/Output Module (Spec Sheet: 90-1189) The 8 Channel EDIO Module is specially designed to expand the input and output (I/O) capability of the Det-Tronics Eagle Quantum Premier System. The unit is designed to provide continuous and automated fire/gas protection while ensuring system operation through continuous supervision of system I/O and signaling line circuit (SLC). The EDIO module provides eight channels of configurable input or output points that can be configured as input/output, two-wire smoke/heat detector, Class A input, Class A output. Each input point can accept fire detection devices such as heat, smoke, or unitized flame detectors. Each output point can be configured for signaling or releasing output operation. Each channel on the module is provided with individual indicators for active and fault conditions. Monitors eight independent I/O channels IDC Class A or B wiring Class 1 Div. 2 locations combined with Zone 2 rated devices Type N Individual channels are configurable as an input/output/two-wire smoke/heat detectors/ Class A input/Class A output A smoke/heat channel can support up to 15 two-wire smoke and heat devices per channel For Class A input and output wiring two channels are required per Class A circuit Models with SIL 2 certification Individual point style is configurable as a supervised or an unsupervised point User configurable supervision for opens and/or shorts Individual point type is configurable for alarm/supervisory/other input styles, notification/releasing/dry contact output Exceeds the requirements of NFPA 72 Panel or DIN rail mounting EQ3730 EDIO Model Matrix MODEL DESCRIPTION EQ3730 8 Channel Enhanced Discrete Input/Output Module (EDIO) TYPE MOUNTING OPTION D DIN Rail P Panel TYPE APPROVALS R VNIIPO/VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx W FM/CSA/ATEX/IECEx *Type Approvals can use one or more letters to designate the approvals of the product. EQ3730 EDIO Module - SIL 2 Model Part Number Material SIL/FM/CSA/ATEX/IECEx Ship Weight EQ3730PT 009174-012 AL X 1.0 lb (0.45 kg) EQ3730DT 009174-013 AL X 2.0 lb (0.90 kg) EQ3730 EDIO Module Model Part Number Material FM/CSA/ATEX/IECEx Ship Weight EQ3730PW 009174-002 AL X 1.0 lb (0.45 kg) EQ3730DW 009174-003 AL X 2.0 lb (0.90 kg)
Det-Tronics EQ3780HSDM High Speed Deluge Module

EQ3780HSDM High Speed Deluge Module (HSDM) (Spec Sheet: 90-1233) is specifically designed to expand the capability of the Det-Tronics Eagle Quantum Premier® (EQP) System by providing the capability to activate ultra-high speed suppression systems for hazardous applications such as munitions manufacturing. The HSDM provides up to six (6) configurable input channels and up to six (6) configurable output channels that can be programmed for supervised or unsupervised operation. Typical initiating devices include optical flame detectors, heat detectors, and manual pull stations. Output channels are designed to activate Factory Mutual (FM) approved solenoids. Solenoids that are activated by the HSDM are typically used to initiate pilot-actuated deluge valves. A unique cascade output feature allows the output of the HSDM to be connected to the input of another HSDM, extending the systems capability to activate multiple solenoids with a single input. Typical 2 mS independent response time Available only as part of a EQ3900 Series Certified System Uniquely programmable outputs - one-to-one, one-to-many, or many-to-one Cascade capability to activate multiple solenoids with a single input Internal independent logic capabilities RFI and EMI hardened (CE Marked and Maritime Compliant) Expands the capabilities of the Det-Tronics Eagle Quantum Premier® system Provides up to six (6) Class B Input Channels (Supports Class A wiring when two input channels are combined) Provides up to six (6) Class B Output Channels (Supports Class A wiring when two output channels are combined) Input and Output channels are configurable as supervised or unsupervised points Output Channels are capable of continuously driving 2A at 30Vdc, up to a maximum of 10A per module Individual channel LEDs indicate Normal, Active, and Fault status Provides remote I/O capabilities via LON/SLC Panel or DIN rail mounting Module level status LED indicator Plug-in wiring connectors Meets the requirements of NFPA 72 Allows customer to meet requirements of NFPA 15, Chapter 12 FM, CSA, ATEX, IECEx, Exida, and DNV-GL certified SIL 2 rated per IEC 61508 Series EQ3780 HSDM Model Matrix MODEL DESCRIPTION EQ3780 High Speed Deluge Module TYPE INSTALLATION OPTION D Din Rail P Panel TYPE APPROVALS T SIL/FM/CSA/ATEX/IECEx
Det-Tronics EQ3900G Power Distribution / Monitoring Enclosure Solution

This wall-mounted enclosure accommodates the Power Supply Monitor, terminal blocks, relays, circuit breakers, and fuses as physical space allows. Red Painted (RAL 3020) Steel Enclosure 20”(H) x 20”(W) x 8”(D) (508mm x 508mm x 203mm) Front Access Door with Locking Key Handle Passive Venting NEMA 4, IP66 No Viewing Window or Operators One EQ2100 PSM Power Supply Monitor installed Provides required isolation for high voltage circuitry Backup Battery Enclosure This wall-mounted enclosure holds up to four 12 Volt, sealed lead acid, top-post, 100AH batteries. Red Painted (RAL 3020) Steel Enclosure 30” (H) x 30” (W) x 8” (D) (762mm x 762mm x 203mm) One shelf Latching front access door Filtered vents NEMA 1
Det-Tronics EQP21XXPS Power Supplies

EQP21XXPS Power Supplies can be used as singular or duplex. The power supply is available in a DIN rail mount or panel mount configuration for ease of mounting. Power supplies should be sized to approximately 50% of the power draw requirement or to local code requirements. EQP21XX Power Supply Model Part Number Description Ship Weight EQP2120PS-B 010988-001* EQP2120PS-B 20A 120/220V PANEL 3.7 lb (1.7 kg) EQP2120PS 010988-002 EQP2120PS 20A 120/220V DIN 3.7 lb (1.7 kg) EQP2110PS-P 010985-001* EQP2110PS-P 10A 120/220V, PANEL 2.9 lb (1.3 kg) EQP2110PS 010985-002 EQP2110PS 10A 120/220V, DIN 2.9 lb (1.3 kg) *For FM/USCG approved system
Det-Tronics EQP21XXPS Power Supplies Control Room

EQP21XXPS Power Supplies are used in pairs where the primary source of input supply is connected to one and the secondary source is connected to the other. A maximum of eight power supplies operated in parallel can be connected to each input supply. Both the primary and secondary sets must be individually capable of operating the system without the other supply. The secondary source is required to be continuously powered. EQP21XX Power Supply Model Part Number Description Ship Weight EQP2120PS-B 010988-001* EQP2120PS-B 20A 120/220V PANEL 3.7 lb (1.7 kg) EQP2120PS 010988-002 EQP2120PS 20A 120/220V DIN 3.7 lb (1.7 kg) *For FM/USCG approved system EQP2410 Converter serves as a DC voltage regulator for the secondary/back-up power supply source. It converts grounded DC input source into floating DC output power for ground fault monitoring capability. EQP2410 Converter Model Part Number Description Ship Weight EQP2410PS-P 010892-001* 10A 24VDC CONVERTER, PANEL 2.7 lb (1.2 kg) EQP2410PS 010892-002 10A 24VDC CONVERTER, DIN 2.7 lb (1.2 kg) *For FM/USCG approved system Diode Module Model Part Number Description Ship Weight N/A 009934-001* DIODE REDUNDANCY MOD W/MTG BKT 2.0 lb (0.90 kg) N/A 009934-002 DIODE REDUNDANCY MOD DIN RAIL 2.0 lb (0.90 kg) *For FM/USCG approved system EQ2220GFM Ground Fault Monitor (Spec Sheet: 90-1134) provides ground fault monitoring in a system that includes reliable dual isolated 24 Vdc power. The output from the ground fault monitor is a contact closure in the presence of a ground fault. The ground fault monitor is DIN rail mountable and is intended to be mounted in the same enclosure as the controller. Ground Fault Monitor (For use with power supplies above) Model Part Number Description Ship Weight EQ2220GFM 007941-001 Ground Fault Monitor 0.5 lb (0.2 kg) EQ2220GFMR 007941-901 Ground Fault Monitor 0.5 lb (0.2 kg) EQ3900RPS (Manual: 95-8745) The EQ3900RPS Remote Power Supply is an industrial power supply that accepts two independent AC inputs and produces 24 Vdc with up to 18 amperes output current. The EQ3900RPS remote power supply can be configured with various numbers of 24 Vdc power outputs, fuse monitoring, and status indicators. There are two designs for the EQ3900RPS depending upon where they will be located. One model is intended for use in hazardous locations, with certification for Class I, Division 1 and Class I, Division 2 per the National Electrical Code, and one model for ordinary locations. MODEL DESCRIPTION EQ3900RPS Remote LON-based Power Supply TYPE ENCLOSURE E Explosion-proof (Class I, Division 1) G Ordinary Location TYPE 24 VDC POWER OUTPUTS (Notes 1 & 2) 1 1 24Vdc Power Output (18 Amp Fuses) 2 2 24Vdc Power Outputs (9 Amp Fuses) 3 3 24Vdc Power Outputs (6 Amp Fuses) TYPE FUSE MONITORING (Notes 2 & 3) 0 0 Fuse Monitoring 1 1 Fuse Monitoring (Power Outputs: #1) 2 2 Fuse Monitoring (Power Outputs: #1& #2) 3 3 Fuse Monitoring (Power Outputs: #1,#2,& #3) TYPE INDICATIONS (More than one can be chosen) (Notes 3 & 5) N No Indicator or Operator A Power Present Indicator B Power Trouble Indicator C Ground Fault Indicator D Ground Fault Test Operator TYPE WINDOW N No Window W Window NOTES: 1. Maximum total current draw = 18 amperes. All power outputs have same fuse rating. 2. Fuse monitoring by EQP only. No local indication. 3. Consult factory if other configuration are desired. 4. Consult factory for size and number of conduit entries. 5. No ingress rating if operators are included. EQ3900 RPS Power Supply Description Part Number Material Entries Div 1 Class 1 FM/CSA EQ3900RPS 000525-XXX AL Up to 12 X X EQ3900RPS 000525-XXX SS Up to 12 X
Det-Tronics Explosion-proof Input Output Module

EQ3770EIO (Manual: 95-8761)The Eagle Quantum Premier EQ3770 EIO Input/Output module for hazardous locations provides an economic solution for field mounted systems and devices. The EIO can be used with most EQ37XX devices, and can be combined with an onboard ground fault monitor. The enclosure can be configured to house various Eagle Quantum Premier 8 channel IO modules. They are intended for use in hazardous locations, with certifications that include Class I, Division 1 per the National Electrical Code, and Zone 1 per EN/IEC60079-1. EQ3770 EIO Description Part Number Material Treads Window Div/Zone Exd FM/CSAs ATEX/IECex EQ3770EIO 000520-051 AL 8-NPT X X EQ3770EIO 000520-052 AL 8-NPT X X X EQ3770EIO 000520-053 AL 8-Metric X X EQ3770EIO 000520-054 AL 8-Metric X X X
Det-Tronics Flame Detector Hardware

Q1113A Universal Air Shield Assembly (Manual: 95-8321). Use on UV, IR, and UVIR detectors (C7050A, B and H, C7051, C7052, C7098, U7600, U7602 and U7698) in areas with airborne contamination. Consists of Delrin (solvent-resistant plastic) air shield housing with bronze sintered air diffuser. Quick connect air line fitting accepts 1/4 inch OD nylon tubing for instrument grade air supply of 5 to 15 psi at 3 or more cubic feet per minute. Easy to install on existing detectors. Q1113 Universal Air Shield Assembly Model Part Number Air Connection Air Supply Air Requirement Ship Weight Q1113A1001 004273-002 1/4" OD nylon tubing 5-15 psi 3 cfm minimum 1 lb (0.45 kg) Q1115 Universal Air Shield/Flange Mount Assembly (Manual: 95-8467). Use on UV and IR detectors (C7050B, C7098, U7600, U7602 and U7698) in areas with air-borne contaminants. Available in either aluminum or stainless steel with a sintered air diffuser. Quick connect air line fitting accepts 1/4 inch OD nylon tubing for instrument grade air supply of 5 to 15 psi at 3 or more cubic feet per minute. Q1115 Universal Air Shield / Flange Mount Assembly Model Part Number Material Air Connection Air Supply Air Requirement Ship Weight Q1115A1001 006528-001 SS 1/4” OD nylon tubing 5-15 psi 3 cfm minimum 2 lb (0.9 kg) Q1115A1002 006528-002 AL 1/4” OD nylon tubing 5-15 psi 3 cfm minimum 1 lb (0.45 kg) Q1116 Universal Air Shield Assembly (Manual: 95-8597). Use on all X-Series flame detectors in areas with air-borne contaminants. Available in aluminum with a sintered air diffuser. Quick connect air line fitting accepts 1/4 inch OD nylon tubing for instrument grade air supply of 12 to 20 psi at 3 or more cubic feet per minute. Q1116 Universal Air Shield Assembly Model Part Number Air Connection Air Supply Air Requirement Ship Weight Q1116A1001 007240-001 1/4" OD nylon tubing 12-20 psi 3 cfm minimum 2 lb (0.9 kg) N/A 011990-001 Q1116/Q1118 SINTER REPLACEMENT KIT 2 lb (0.9 kg) Q1118 Universal Air Shield/Flange Mount Assembly (Manual: 95-8595). Use on all X-Series flame detectors in areas with air-borne contaminants. Available in either aluminum or stainless steel with a sintered air diffuser. Quick connect air line fitting accepts 1/4 inch OD nylon tubing for instrument grade air supply of 10 to 20 psi at 3 or more cubic feet per minute. Q1118 Universal Air Shield / Flange Mount Assembly Model Part Number Material Air Connection Air Supply Air Requirement Ship Weight Q1118A1001 007818-001 AL 1/4" OD nylon tubing 10-30 psi 3-20 cfm target 2 lb (0.9 kg) Q1118S1001 007818-002 SS 1/4” OD nylon tubing 10-30 psi 3-20 cfm target 6 lb (2.75 kg) N/A 011990-001 Q1116/Q1118 SINTER REPLACEMENT KIT 2 lb (0.9 kg) NOTE: Not compatible with Q9033 Q1198 Dual Air Shield/Flange Mount Assembly (Manual: 95-8598). Use on X9800 in areas with high levels of powdered air-borne contaminants. Available in Aluminum with a sintered air diffuser. Provided with two quick connect air line fittings - one for constant air flow function and the second for quick clean/purge function. Both fittings accept 1/4 inch OD nylon tubing for instrument grade air supply of 10 to 60 psi at 3 or more cubic feet per minute. Q1198 Dual Air Shield / Flange Mount Assembly for X9800 Model Part Number Material Air Connection Air Supply Air Requirement Ship Weight Q1198A1001 009199-001 AL 6mm OD nylon tubing 10-20 psi 3-5 cfm min 2 lb (0.9 kg) NOTE: Not compatible with Q9033
Det-Tronics FlexSight LS2000 Line-of-Sight Infrared Gas Detector

The FlexSight LS2000 Line-of-Sight Infrared Gas Detection System (Spec Sheet: 90-1215) is a stainless steel, IR beam-type hydrocarbon gas detection system. The system consists of two modules (transmitter and receiver) offering: Eagle Quantum Premier model Industry Leading Misalignment Tolerance: ±0.8 degrees (~±56cm @ 40m; ~±168cm @ 120m). Patented design. Compliance to ISA-12.13.04 performance standard Third party certified for Methane (default). Factory calibrated to Methane, Propane, and Butane Performance certified to EN60079-29-4 -55°C to +75°C certified temperature range Compliance to FM6325 and ISA-12.13.04 performance standards Certified SIL 2 capable Module separation distance range from 5-120 meters IR source: High performance, long lasting xenon flashlamp - 10 year warranty on IR source 5 year detector warranty Standard 4-20 mA output (configurable), HART communications (on receiver), RS485 Modbus Optional alarm relays (Ex d only) Easy Install / Alignment - Mounting / alignment hardware included with both modules - Built-in locking adjusters deliver fine control of alignment angles - Telescope alignment tool for accurate alignment - No HART or Software Interrogation tool needed Use of ‘Smart’ monitoring and control: maintains device temperature, heater obscuration triggers, drift / beam block tolerance, power supply and 4-20 mA monitoring, event logging, power consumption management Non-intrusive zero calibration options: on-board magnetic switch, HART communication, external switch, or MODBUS communication DNV Maritime approval Globally certified including SIL, FM, CSA, ATEX, IECEx, CE, DNV, INMETRO, and CUTR / KIM approvals Optional communication link provides: dynamic lamp power adjustments, synchronized LEDs, remote configuration read and calibration initiation from the transmitter LS2000 Model Matrix MODEL DESCRIPTION LS2000 Line-of-Sight Infrared Gas Detector TYPE MATERIAL S Stainless Steel TYPE CONDUIT ENTRY THREAD TYPE N 3/4" NPT, 4 Port Receiver, 2 Port Transmitter M Metric M25, 4 Port Receiver, 2 Port Transmitter TYPE OUTPUT 00 None (Transmitter only) 14 Eagle Quantum Premier (EQP) (Receiver or Kit) 18 4-20 mA, RS485, HART (Receiver or Kit) 25 4-20 mA, RS485, HART w/Optional Relays (Receiver or Kit) – Ex d only TYPE RANGE N None (Transmitter only) S Short Range, 5-60 Meters (Receiver or Kit) L Long Range, 30-120 Meters (Receiver or Kit) TYPE FACTORY SET TARGET GAS* N None (Transmitter only) M Methane (Receiver or Kit) P Propane (Receiver or Kit) B Butane (Receiver or Kit) TYPE APPROVALS† A FM/CSA B INMETRO E ATEX/IECEx R VNIIFTRI (RUSSIA) S SIL TYPE CLASSIFICATION 1 Division and/or Ex d e 2 Division and/or Ex d TYPE CONFIGURATION S Transmitter/Receiver/Mounting Hardware T Transmitter Only R Receiver Only TM Spare Transmitter Electronics Module RM Spare Receiver Electronics Module *The LS2000 is factory calibrated to M, P, and B gas types; this selection indicates which gas type the device will be configured to detect upon arrival. Users can change this selection via HART or MODBUS. †Type Approvals can use one or more letters to designate the approvals of the product. Typical LS2000 Customer Proposal Qty Model Part Number Description 1 LS2000SM18SMSE1S 012731-503 Consists of LS2000SM00NNSE1T Transmitter, LS2000SM18SMSE1R Receiver, and two Mounting & Alignment Brackets LS2000 - Complete Gas Detector Systems - SIL/FM/CSA Model Part Number Target Gas Range Threads Relay Output EQP Output DNV·GL Ex d e Ex d LS2000SN18SMSA1S 012731-401 Methane Short 3/4 NPT X X LS2000SM18SMSA1S 012731-403 M25 X X LS2000SN25SMSA2S 012731-426 3/4 NPT X X X LS2000SM25SMSA2S 012731-427 M25 X X X LS2000SN18SMSA2S 012731-402 3/4 NPT X X LS2000SN18LMSA1S 012731-451 Long 3/4 NPT X X LS2000SM18LMSA1S 012731-453 M25 X X LS2000SN25LMSA2S 012731-476 3/4 NPT X X X LS2000SM25LMSA2S 012731-477 M25 X X X LS2000SN18LMSA2S 012731-452 3/4 NPT X X LS2000SN14SMSA1S 011760-401 Methane Short 3/4 NPT X X X LS2000SM14SMSA1S 011760-403 M25 X X X LS2000SN14SMSA2S 011760-426 3/4 NPT X X X LS2000SM14SMSA2S 011760-427 M2511 X X X LS2000SN14LMSA1S 011760-451 Long 3/4 NPT X X X LS2000SM14LMSA1S 011760-453 M25 X X X LS2000SN14LMSA2S 011760-476 3/4 NPT X X X LS2000SM14LMSA2S 011760-477 M25 X X X LS2000SN18SPSA1S 012731-401P Propane Short 3/4 NPT X X LS2000SN25SPSA2S 012731-426P 3/4 NPT X X X LS2000SN18LPSA1S 012731-451P Long 3/4 NPT X X LS2000SN25LPSA2S 012731-476P 3/4 NPT X X X LS2000SN14SPSA1S 011760-401P Propane Short 3/4 NPT X X X LS2000SN14SPSA2S 011760-426P 3/4 NPT X X X LS2000SN14LPSA1S 011760-451P Long 3/4 NPT X X X LS2000SN14LPSA2S 011760-476P 3/4 NPT X X X LS2000SN18SBSA1S 012731-401B Butane Short 3/4 NPT X X LS2000SN25SBSA2S 012731-426B 3/4 NPT X X X LS2000SN18LBSA1S 012731-451B Long 3/4 NPT X X LS2000SN25LBSA2S 012731-476B 3/4 NPT X X X LS2000SN14SBSA1S 011760-401B Butane Short 3/4 NPT X X X LS2000SN14SBSA2S 011760-426B 3/4 NPT X X X LS2000SN14LBSA1S 011760-451B Long 3/4 NPT X X X LS2000SN14LBSA2S 011760-476B 3/4 NPT X X X Ship Weight = 85 lbs (38 kg) LS2000 - Complete Gas Detector Systems - SIL/ATEX/IECEx Model Part Number Target Gas Range Threads Relay Output EQP Output DNV·GL Ex d e Ex d LS2000SN18SMSE1S 012731-501 Methane Short 3/4 NPT X X LS2000SN18SMSE2S 012731-502 3/4 NPT X X LS2000SM18SMSE1S 012731-503 M25 X X LS2000SM18SMSE2S 012731-504 M25 X X LS2000SN25SMSE2S 012731-526 3/4 NPT X X X LS2000SM25SMSE2S 012731-527 M25 X X X LS2000SN18LMSE1S 012731-551 Long 3/4 NPT X X LS2000SN18LMSE2S 012731-552 3/4 NPT X X LS2000SM18LMSE1S 012731-553 M25 X X LS2000SM18LMSE2S 012731-554 M25 X X LS2000SN25LMSE2S 012731-576 3/4 NPT X X X LS2000SM25LMSE2S 012731-577 M25 X X X LS2000SN14SMSE1S 011760-501 Methane Short 3/4 NPT X X X LS2000SM14SMSE1S 011760-503 M25 X X X LS2000SN14SMSE2S 011760-526 3/4 NPT X X X LS2000SM14SMSE2S 011760-527 M25 X X X LS2000SN14LMSE1S 011760-551 Long 3/4 NPT X X X LS2000SM14LMSE1S 011760-553 M25 X X X LS2000SN14LMSE2S 011760-576 3/4 NPT X X X LS2000SM14LMSE2S 011760-577 M25 X X X LS2000SM18SPSE1S 012731-503P Propane Short M25 X X LS2000SM18SPSE2S 012731-504P M25 X X LS2000SM25SPSE2S 012731-527P M25 X X X LS2000SM18LPSE1S 012731-553P Long M25 X X LS2000SM18LPSE2S 012731-554P M25 X X LS2000SN25LPSE2S 012731-576P 3/4 NPT X X X LS2000SM25LPSE2S 012731-577P M25 X X X LS2000SM14SPSE1S 011760-503P Propane Short M25 X X X LS2000SM14SPSE2S 011760-527P M25 X X X LS2000SM14LPSE1S 011760-553P Long M25 X X X LS2000SM14LPSE2S 011760-577P M25 X X X LS2000SN18SBSE1S 012731-501B Butane Short 3/4 NPT X X LS2000SM18SBSE1S 012731-503B M25 X X LS2000SM18SBSE2S 012731-504B M25 X X LS2000SM25SBSE2S 012731-527B M25 X X X LS2000SN18LBSE1S 012731-551B 3/4 NPT X X LS2000SM18LBSE1S 012731-553B Long M25 X X LS2000SM18LBSE2S 012731-554B M25 X X LS2000SM25LBSE2S 012731-577B M25 X X X LS2000SM14SBSE1S 011760-503B Butane Short M25 X X X LS2000SM14SBSE2S 011760-527B M25 X X X LS2000SM14LBSE1S 011760-553B Long M25 X X X LS2000SM14LBSE2S 011760-577B M25 X X X Ship Weight = 85 lbs (38 kg) NOTE: All complete systems have a long range (L) of 30-120 meters or a short range (S) of 5-60 meters (apertures may be needed for shortest 15m of each range). The complete system includes a transmitter, receiver, aperture, and mounting hardware. LS2000 - Complete Gas Detector Systems - SIL/INMETRO Model Part Number Target Gas Range Threads Relay Output DNV Ex d e Ex d LS2000SN18SMSB1S 012731-201 Methane Short 3/4 NPT X X LS2000SN18SMSB2S 012731-202 3/4 NPT X X LS2000SN25SMSB2S 012731-226 3/4 NPT X X X LS2000SN18LMSB1S 012731-251 Long 3/4 NPT X X LS2000SN18LMSB2S 012731-252 3/4 NPT X X LS2000SN25LMSB2S 012731-276 3/4 NPT X X X LS2000SN18SPSB1S 012731-201P Propane Short 3/4 NPT X X LS2000SN18SPSB2S 012731-202P 3/4 NPT X X LS2000SN25SPSB2S 012731-226P 3/4 NPT X X X LS2000SN18LPSB1S 012731-251P Long 3/4 NPT X X LS2000SN18LPSB2S 012731-252P 3/4 NPT X X LS2000SN25LPSB2S 012731-276P 3/4 NPT X X X LS2000SN18SBSB1S 012731-201B Butane Short 3/4 NPT X X LS2000SN18SBSB2S 012731-202B 3/4 NPT X X LS2000SN25SBSB2S 012731-226B 3/4 NPT X X X LS2000SN18LBSB1S 012731-251B Long 3/4 NPT X X LS2000SN18LBSB2S 012731-252B 3/4 NPT X X LS2000SN25LBSB2S 012731-276B 3/4 NPT X X X Ship Weight = 85 lbs (38 kg) NOTE: All complete systems have a long range (L) of 30-120 meters or a short range (S) of 5-60 meters (apertures may be needed for shortest 15m of each range). The complete system includes a transmitter, receiver, aperture, and mounting hardware. LS2000 Transmitter Replacement - SIL/FM/CSA Model Part Number Threads DNV·GL Ex d e Ex d LS2000SN00NNSA1T 012020-401 3/4 NPT X X LS2000SN00NNSA2T 012020-402 3/4 NPT X X LS2000SM00NNSA1T 012020-403 M25 X X LS2000SM00NNSA2T 012020-404 M25 X X Ship Weight = 23 lbs (10.4 kg) NOTE: Spare transmitters do not include mounting hardware LS2000 Transmitter Replacement - SIL/ATEX/IECEx Model Part Number Threads DNV·GL Ex d e Ex d LS2000SN00NNSE1T 012020-501 3/4 NPT X X LS2000SN00NNSE2T 012020-502 3/4 NPT X X LS2000SM00NNSE1T 012020-503 M25 X X LS2000SM00NNSE2T 012020-504 M25 X X Ship Weight = 23 lbs (10.4 kg) NOTE: Spare transmitters do not include mounting hardware LS2000 Transmitter Replacement - SIL/INMETRO Model Part Number Threads DNV·GL Ex d e Ex d LS2000SN00NNSB1T 012020-201 3/4 NPT X X LS2000SN00NNSB2T 012020-202 3/4 NPT X X Ship Weight = 23 lbs (10.4 kg) NOTE: Spare transmitters do not include mounting hardware LS2000 - Receiver Replacement - SIL/FM/CSA Model Part Number Target Gas Range Threads Relay Output EQP Output Relay Output Relay Output Relay Output LS2000SN18SMSA1R 012097-401 Methane Short 3/4 NPT X X LS2000SN18SMSA2R 012097-402 3/4 NPT X X LS2000SM18SMSA1R 012097-403 M25 X X LS2000SN25SMSA2R 012097-426 3/4 NPT X X X LS2000SM25SMSA2R 012097-427 M25 X X X LS2000SN18LMSA1R 012097-451 Long 3/4 NPT X X LS2000SN18LMSA2R 012097-452 3/4 NPT X X LS2000SM18LMSA1R 012097-453 X X LS2000SN25LMSA2R 012097-476 3/4 NPT X X X LS2000SM25LMSA2R 012097-477 X X X LS2000SN14SMSA1R 011758-401 Methane Short 3/4 NPT X X X LS2000SM14SMSA1R 011758-403 X X X LS2000SN14SMSA2R 011758-426 3/4 NPT X X X LS2000SM14SMSA2R 011758-427 X X X LS2000SN14LMSA1R 011758-451 Long 3/4 NPT X X X LS2000SM14LMSA1R 011758-453 X X X LS2000SN14LMSA2R 011758-476 3/4 NPT X X X LS2000SM14LMSA2R 011758-477 X X X LS2000SN18SPSA1R 012097-401P Propane Short 3/4 NPT X X LS2000SN25SPSA2R 012097-426P 3/4 NPT X X X LS2000SN18LPSA1R 012097-451P 3/4 NPT X X LS2000SN25LPSA2R 012097-476P 3/4 NPT X X X LS2000SN14SPSA1R 011758-401P Propane Short 3/4 NPT X X X LS2000SN14SPSA2R 011758-426P 3/4 NPT X X X LS2000SN14LPSA1R 011758-451P Long 3/4 NPT X X X LS2000SN14LPSA2R 011758-476P 3/4 NPT X X X LS2000SN18SBSA1R 012097-401B Butane Short 3/4 NPT X X LS2000SN25SBSA2R 012097-426B 3/4 NPT X X X LS2000SN18LBSA1R 012097-451B Long 3/4 NPT X X LS2000SN25LBSA2R 012097-476B 3/4 NPT X X X LS2000SN14SBSA1R 011758-401B Butane Short 3/4 NPT X X X LS2000SN14SBSA2R 011758-426B 3/4 NPT X X X LS2000SN14LBSA1R 011758-451B Long 3/4 NPT X X X LS2000SN14LBSA2R 011758-476B 3/4 NPT X X X Ship Weight = 20 lbs (9 kg) NOTE: Spare receivers do not include mounting hardware LS2000 - Receiver Replacement - SIL/ATEX/IECEx Model Part Number Target Gas Range Threads Relay Output EQP Output DNV·GL Ex d e Ex d LS2000SN18SMSE1R 012097-501 Methane Short 3/4 NPT X X LS2000SN18SMSE2R 012097-502 3/4 NPT X X LS2000SM18SMSE1R 012097-503 M25 X X LS2000SM18SMSE2R 012097-504 M25 X X LS2000SN25SMSE2R 012097-526 3/4 NPT X X X LS2000SM25SMSE2R 012097-527 M25 X X X LS2000SN18LMSE1R 012097-551 Long 3/4 NPT X X LS2000SN18LMSE2R 012097-552 3/4 NPT X X LS2000SM18LMSE1R 012097-553 M25 X X LS2000SM18LMSE2R 012097-554 M25 X X LS2000SN25LMSE2R 012097-576 3/4 NPT X X X LS2000SM25LMSE2R 012097-577 M25 X X X LS2000SN14SMSE1R 011758-501 Methane Short 3/4 NPT X X X LS2000SM14SMSE1R 011758-503 M25 X X X LS2000SN14SMSE2R 011758-526 3/4 NPT X X X LS2000SM14SMSE2R 011758-527 M25 X X X LS2000SN14LMSE1R 011758-551 Long 3/4 NPT X X X LS2000SM14LMSE1R 011758-553 M25 X X X LS2000SN14LMSE2R 011758-576 3/4 NPT X X X LS2000SM14LMSE2R 011758-577 M25 X X X LS2000SM18SPSE1R 012097-503P Propane Short M25 X X LS2000SM18SPSE2R 012097-504P M25 X X LS2000SM25SPSE2R 012097-527P M25 X X X LS2000SM18LPSE1R 012097-553P Long M25 X X LS2000SM18LPSE2R 012097-554P M25 X X LS2000SN25LPSE2R 012097-576P 3/4 NPT X X X LS2000SM25LPSE2R 012097-577P M25 X X X LS2000SM14SPSE1R 011758-503P Propane Short M25 X X X LS2000SM14SPSE2R 011758-527P M25 X X X LS2000SM14LPSE1R 011758-553P Long M25 X X X LS2000SM14LPSE2R 011758-577P M25 X X X LS2000SM18SBSE1R 012097-503B Butane Short M25 X X LS2000SM18SBSE2R 012097-504B M25 X X LS2000SM25SBSE2R 012097-527B M25 X X X LS2000SM18LBSE1R 012097-553B Long M25 X X LS2000SM18LBSE2R 012097-554B M25 X X LS2000SM25LBSE2R 012097-577B M25 X X X LS2000SM14SBSE1R 011758-503B Butane Short M25 X X X LS2000SM14SBSE2R 011758-527B M25 X X X LS2000SM14LBSE1R 011758-553B Long M25 X X X LS2000SM14LBSE2R 011758-577B M25 X X X Ship Weight = 20 lbs (9 kg) NOTE: Spare receivers do not include mounting hardware LS2000 - Receiver Replacement - SIL/INMETRO Model Part Number Target Gas Range Threads Relay Output DNV Ex d e Ex d LS2000SN18SMSB1R 012097-201 Methane Short 3/4 NPT X X LS2000SN18SMSB2R 012097-202 3/4 NPT X LS2000SN25SMSB2R 012097-226 3/4 NPT X X X LS2000SN18LMSB1R 012097-251 Long 3/4 NPT X X LS2000SN18LMSB2R 012097-252 3/4 NPT X LS2000SN25LMSB2R 012097-276 3/4 NPT X X X LS2000SN18SPSB1R 012097-201P Propane Short 3/4 NPT X X LS2000SN18SPSB2R 012097-202P 3/4 NPT X LS2000SN25SPSB2R 012097-226P 3/4 NPT X X X LS2000SN18LPSB1R 012097-251P Long 3/4 NPT X X LS2000SN18LPSB2R 012097-252P 3/4 NPT X LS2000SN25LPSB2R 012097-276P 3/4 NPT X X X LS2000SN18SBSB1R 012097-201B Butane Short 3/4 NPT X X LS2000SN18SBSB2R 012097-202B 3/4 NPT X LS2000SN25SBSB2R 012097-226B 3/4 NPT X X X LS2000SN18LBSB1R 012097-251B Long 3/4 NPT X X LS2000SN18LBSB2R 012097-252B 3/4 NPT X LS2000SN25LBSB2R 012097-276B 3/4 NPT X X X Ship Weight = 20 lbs (9 kg) NOTE: Spare receivers do not include mounting hardware LS2000 Spare Transmitter Module - SIL/FM/CSA Model Part Number Threads DNV·GL Ex d e Ex d LS2000SN00NNSA1TM 012713-401 3/4 NPT X X LS2000SN00NNSA2TM 012713-402 3/4 NPT X X LS2000SM00NNSA1TM 012713-403 M25 X X LS2000SM00NNSA2TM 012713-404 M25 X X Ship Weight = 10.4 lbs (4.7 kg) NOTE: Includes front electronics module only LS2000 Spare Transmitter Module - SIL/ATEX/IECEx Model Part Number Threads DNV·GL Ex d e Ex d LS2000SN00NNSE1TM 012713-501 3/4 NPT X X LS2000SN00NNSE2TM 012713-502 3/4 NPT X X LS2000SM00NNSE1TM 012713-503 M25 X X LS2000SM00NNSE2TM 012713-504 M25 X X Ship Weight = 10.4 lbs (4.7 kg) NOTE: Includes front electronics module only LS2000 Spare Transmitter Module - SIL/INMETRO Model Part Number Threads DNV·GL Ex d e Ex d LS2000SN00NNSB1TM 012713-201 3/4 NPT X X LS2000SN00NNSB2TM 012713-202 3/4 NPT X X Ship Weight = 10.4 lbs (4.7 kg) NOTE: Includes front electronics module only LS2000 Spare Receiver Modules - SIL/FM/CSA Model Part Number Target Gas Range Threads Relay Output EQP Output DNV·GL Ex d e Ex d LS2000SN18SMSA1RM 012714-401 Methane Short 3/4 NPT X X LS2000SM18SMSA1RM 012714-403 M25 X X LS2000SN25SMSA2RM 012714-426 3/4 NPT X X X LS2000SM25SMSA2RM 012714-427 M25 X X X LS2000SN14SMSA1RM 011759-401 3/4 NPT X X X LS2000SM14SMSA1RM 011759-403 M25 X X X LS2000SN14SMSA2RM 011759-426 3/4 NPT X X X LS2000SM14SMSA2RM 011759-427 M25 X X X LS2000SN18LMSA1RM 012714-451 Long 3/4 NPT X X LS2000SM18LMSA1RM 012714-453 M25 X X LS2000SN25LMSA2RM 012714-476 3/4 NPT X X X LS2000SM25LMSA2RM 012714-477 M25 X X X LS2000SN14LMSA1RM 011759-451 3/4 NPT X X X LS2000SM14LMSA1RM 011759-453 M25 X X X LS2000SN14LMSA2RM 011759-476 3/4 NPT X X X LS2000SM14LMSA2RM 011759-477 M25 X X X LS2000SN18SPSA1RM 012714-401P Propane Short 3/4 NPT X X LS2000SN25SPSA2RM 012714-426P 3/4 NPT X X X LS2000SN14SPSA1RM 011759-401P 3/4 NPT X X X LS2000SN14SPSA2RM 011759-426P 3/4 NPT X X X LS2000SN18LPSA1RM 012714-451P Long 3/4 NPT X X LS2000SN25LPSA2RM 012714-476P 3/4 NPT X X X LS2000SN14LPSA1RM 011759-451P 3/4 NPT X X X LS2000SN14LPSA2RM 011759-476P 3/4 NPT X X X LS2000SN18SBSA1RM 012714-401B Butane Short 3/4 NPT X X LS2000SN25SBSA2RM 012714-426B 3/4 NPT X X X LS2000SN14SBSA1RM 011759-401B 3/4 NPT X X X LS2000SN14SBSA2RM 011759-426B 3/4 NPT X X X LS2000SN18LBSA1RM 012714-451B Long 3/4 NPT X X LS2000SN25LBSA2RM 012714-476B 3/4 NPT X X X LS2000SN14LBSA1RM 011759-451B 3/4 NPT X X X LS2000SN14LBSA2RM 011759-476B 3/4 NPT X X X Ship Weight = 7.8 lbs (3.6 kg) NOTE: Includes front electronics module only LS2000 Spare Receiver Modules - SIL/ATEX/IECEx Model Part Number Target Gas Range Threads Relay Output EQP Output DNV·GL Ex d e Ex d LS2000SN18SMSE1RM 012714-501 Methane Short 3/4 NPT X X LS2000SN18SMSE2RM 012714-502 3/4 NPT X X LS2000SM18SMSE1RM 012714-503 M25 X X LS2000SM18SMSE2RM 012714-504 M25 X X LS2000SN25SMSE2RM 012714-526 3/4 NPT X X X LS2000SM25SMSE2RM 012714-527 M25 X X X LS2000SN14SMSE1RM 011759-501 3/4 NPT X X X LS2000SM14SMSE1RM 011759-503 M25 X X X LS2000SN14SMSE2RM 011759-526 3/4 NPT X X X LS2000SM14SMSE2RM 011759-527 M25 X X X LS2000SN18LMSE1RM 012714-551 Long 3/4 NPT X X LS2000SN18LMSE2RM 012714-552 3/4 NPT X X LS2000SM18LMSE1RM 012714-553 M25 X X LS2000SM18LMSE2RM 012714-554 M25 X X LS2000SN25LMSE2RM 012714-576 3/4 NPT X X X LS2000SM25LMSE2RM 012714-577 M25 X X X LS2000SN14LMSE1RM 011759-551 3/4 NPT X X X LS2000SM14LMSE1RM 011759-553 M25 X X X LS2000SN14LMSE2RM 011759-576 3/4 NPT X X X LS2000SM14LMSE2RM 011759-577 M25 X X X LS2000SM18SPSE1RM 012714-503P Propane Short M25 X X LS2000SM18SPSE2RM 012714-504P M25 X X LS2000SM25SPSE2RM 012714-527P M25 X X X LS2000SM14SPSE1RM 011759-503P M25 X X X LS2000SM14SPSE2RM 011759-527P M25 X X X LS2000SM18LPSE1RM 012714-553P Long M25 X X LS2000SM18LPSE2RM 012714-554P M25 X X LS2000SM25LPSE2RM 012714-577P M25 X X X LS2000SM14LPSE1RM 011759-553P M25 X X X LS2000SM14LPSE2RM 011759-577P M25 X X X LS2000SM18SBSE1RM 012714-503B Butane Short M25 X X LS2000SM18SBSE2RM 012714-504B M25 X X LS2000SM25SBSE2RM 012714-527B M25 X X X LS2000SM14SBSE1RM 011759-503B M25 X X X LS2000SM14SBSE2RM 011759-527B M25 X X X LS2000SM14SBSE1RM 011759-503B M25 X X X LS2000SM14SBSE2RM 011759-527B M25 X X X LS2000SM18LBSE1RM 012714-553B Long M25 X X LS2000SM18LBSE2RM 012714-554B M25 X X LS2000SM25LBSE2RM 012714-577B M25 X X X LS2000SM14LBSE1RM 011759-553B M25 X X X LS2000SM14LBSE2RM 011759-577B M25 X X X Ship Weight = 7.8 lbs (3.6 kg) NOTE: Includes front electronics module only LS2000 Spare Receiver Modules - SIL/INMETRO Model Part Number Target Gas Range Threads Relay Output DNV Ex d e Ex d LS2000SN18SMSB1RM 012714-201 Methane Short 3/4 NPT X X LS2000SN18SMSB2RM 012714-202 3/4 NPT X X LS2000SN25SMSB2RM 012714-226 3/4 NPT X X X LS2000SN18LMSB1RM 012714-251 Long 3/4 NPT X X LS2000SN18LMSB2RM 012714-252 3/4 NPT X X LS2000SN25LMSB2RM 012714-276 3/4 NPT X X X LS2000SN18SPSB1RM 012714-201P Propane Short 3/4 NPT X X LS2000SN18SPSB2RM 012714-202P 3/4 NPT X X LS2000SN25SPSB2RM 012714-226P 3/4 NPT X X X LS2000SN18LPSB1RM 012714-251P Long 3/4 NPT X X LS2000SN18LPSB2RM 012714-252P 3/4 NPT X X LS2000SN25LPSB2RM 012714-276P 3/4 NPT X X X LS2000SN18SBSB1RM 012714-201B Butane Short 3/4 NPT X X LS2000SN18SBSB2RM 012714-202B 3/4 NPT X X LS2000SN25SBSB2RM 012714-226B 3/4 NPT X X X LS2000SN18LBSB1RM 012714-251B Long 3/4 NPT X X LS2000SN18LBSB2RM 012714-252B 3/4 NPT X X LS2000SN25LBSB2RM 012714-276B 3/4 NPT X X X Ship Weight = 7.8 lbs (3.6 kg) NOTE: Includes front electronics module only LS2000 Accessories Part Number Description 012287-002 LS2000 Alignment Tool 012673-001 System Test Film, (set of 5 films) 103922-003 AMS Trex Device Communicator 014020-001 W6300G1006 Gas Inspector II Kit (PC software and connection hardware included) 009246-003 High Range LS2000 Gas Test Cell (0.125) 009246-001 Low Range OPECL Gas Test Cell 009246-002 High Range OPECL Gas Test Cell 009246-004 Gas Test Cell, LS2000 Methane IEC 009246-005 Gas Test Cell, LS2000 Propane ISO 009246-006 Gas Test Cell, LS2000 Propane IEC 009246-007 Gas Test Cell, LS2000 Butane ISO 009246-008 Gas Test Cell, LS2000 Butane IEC 012840-001 Gas Cell Adapter (converts OPECL Test Cell to mount on LS2000 Rx) 012718-003 Flat Surface Adapter Plate (converts OPECL flat surface mounting to LS2000) 012790-001 Thermal Shield for Right Module* 012791-001 Thermal Shield for Left Module* * Two Thermal Shields required per complete LS2000 system (one right and one left) LS2000 Spare Parts Part Number Description 102740-002 Calibration Magnet* 011773-001 Short Range Aperture† 012300-001 Spare Brow, Rx 012312-001 Spare Brow, Tx 400525-023 Spare M8 Flange Bolt for Tx Module 012660-001 Spare Mounting & Alignment Bracket (for one module only) 103578-001 Anti-seize Lubricant Packet 006680-001 Grease Kit, Silicone 104346-154 O-Ring, 3.75” i.d., for wiring compartment cover 104346-046 O-Ring, 4.25", for front flange Transmitter *1 magnet ships with each individual order of an LS2000 Kit or Receiver free of charge. †Qty 1 aperture is provided with each LS2000 Transmitter
Det-Tronics FlexSonic Acoustic Detector

The FlexSonic® Acoustic Detector – comprised of the AC100 Acoustic Sensor and the ATX10 Acoustic Transmitter (Spec Sheet: 90-1208) is designed to recognize the unique frequency content of events such as gas leaks. When a pressurized gas leak occurs, the frequency content of the sound being generated extends beyond the audible portion of the spectrum into the ultrasonic region (above 20 kHz). The intensity of the sound generated by a leak is determined by several factors including pressure differential, leak rate, gas viscosity, and distance from the leak source. Acoustic detection is less susceptible to environmental factors (such as high winds) that can degrade the ability of traditional sensing technology based on gas concentration to detect the presence of a leak. When combined with line-of-sight and/or point gas detectors, the additional layer of protection provided by the FlexSonic Acoustic Detector offers the ultimate solution for gas leak detection. Analyzes 24 discrete ultrasonic bands Nearly instantaneous response Non-contact gas leak detection 4-20 mA output combined with HART Can detect small gas leaks at or below 6 bar (87 psi) Extensive data logging with removable storage that records the acoustic spectrum Superior false alarm discrimination with patented technology Ideally suited for locations where traditional technologies are challenged, such as outdoor and unmanned operations Large detection coverage area FM, CSA, ATEX, and IECEx Certified SIL 2 Capable for all gas types Globally approved Explosion-proof 316 stainless steel housing Integrated Acoustic Integrity Check (AIC) No routine calibration required Not affected by poisoning FlexSonic AC100/ATX10 Kits Part Number Description Consists of: SIL/FM/CSA/ ATEX/IECEx SIL/ INMETRO SIL/ VNIIFTRI 012152-001 AC100/ATX Kit, 3/4" NPT AC100SNT2 ATX10S5N26T X 012153-001 AC100/ATX Kit, M25 AC100SMT2 ATX10S5M26T X 012152-601 AC100/ATX Kit, 3/4" NPT AC100SNSB2 ATX10S5N26SB X 012153-601 AC100/ATX Kit, M25 AC100SMSB2 ATX10S5M26SB X 012153-901 AC100/ATX Kit, M25 AC100SMSR2 ATX10S5M26SR X Kit includes individually packaged AC100 and ATX10. Typical FlexSonic Customer Proposal Qty Model Part Number Description 1 AC100/ATX10 KIT, M25 012153-001 Consists of AC100SMT2 and ATX10S5M26T Spare Parts Qty Model Part Number Description 1 N/A 104155-001 Micro SDHC Card, 4GB Industrial Temperature Rating 1 N/A 009700-001 Magnetic Tool Accessories Qty Part Number Description 1 104218-001 35mm Socket for use with M25 model 1 012401-001 Acoustic Configurator Package 2 101197-003 Stop Plug, M25, SS, IP66 FlexSonic AC100 Model Matrix MODEL DESCRIPTION AC100 Acoustic Sensor TYPE MATERIAL S Stainless Steel TYPE THREAD TYPE N 3/4" NPT M M25 TYPE APPROVALS* B INMETRO (BRAZIL) R VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx TYPE CLASSIFICATION 2 Division/Zone Ex d *Type Approvals can use one or more letters to designate the approvals of the product. FlexSonic AC100 Acoustic Sensor Model Part Number Threads Ex d SIL/FM/CSA/ATEX/IECEx SIL/INMETRO SIL/VNIIFTRI AC100SNT2 010567-003 3/4" NPT X X AC100SMT2 010567-004 M25 X X AC100SNSB2 010567-603 3/4" NPT X X AC100SMSB2 010567-604 M25 X X AC100SMSR2 010567-904 M25 X X Ship Weight: 6.2 lb (2.8 kg) NOTE: Above part numbers do not include foam insert. AC100 Spare Parts Part Number Description Ship Weight 011355-001 Foam Insert <1lb (<0.45 kg) AC100 Accessories Part Number Description Ship Weight 104218-001 35mm Socket for use with M25 model 1.8 lb (<0.8 kg) 226365-601 STB7A5YW, AL, M25 2.2 lb (1.0 kg) 226365-602 STB7A5NW, AL, 3/4 NPT 2.2 lb (1.0 kg) 226365-603 STB7S5YW, SS, M25 3.0 lb (1.4 kg) 226365-604 STB7S5NW, SS, 3/4 NPT 3.0 lb (1.4 kg) 226365-606 STB7A5NB ,AL, 3/4, INMETRO 2.2 lb (1.0 kg) 226365-607 STB7S5NB, SS, 3/4, INMETRO 3.0 lb (1.4 kg) 226365-963 STB7S5YR,SS,M25,RUSSIA 3.0 lb (1.4 kg) FlexSonic ATX10 Model Matrix MODEL DESCRIPTION ATX10 AC100 Transmitter TYPE MATERIAL S Stainless Steel TYPE # OF OPEN PORTS 5 5 Port TYPE THREAD TYPE N 3/4" NPT M M25 TYPE OUTPUT 26 4-20 mA w/HART Protocol TYPE APPROVALS* B INMETRO (BRAZIL) R VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx *Type Approvals can use one or more letters to designate the approvals of the product. FlexSonic ATX10 Transmitter for AC100 Model Part Number Threads 4-20 RS485 HART Ex d SIL/FM/CSA/ATEX/IECEx SIL/INMETRO SIL/VNIIFTRI ATX10S5N26T 011942-001 3/4 NPT X X X ATX10S5M26T 011942-002 M25 X X X ATX10S5N26SB 011942-601 3/4 NPT X X X ATX10S5M26SB 011942-602 M25 X X X ATX10S5M26SR 011942-902 M25 X X X Ship Weight: 11.5 lb (5.2 kg) ATX10 Spare Parts Part Number Description Ship Weight 010969-001 ATX10 Replacement Module 1 lb (0.45 kg) 011365-102 ATX10 Memory Module Assembly (SD Card not included) 1 lb (0.45 kg) 104155-001 Micro SDHC Card, 4G, Industrial Temperature Rating <1lb (<0.45kg) 103028-027 Plug, 5mm, 4 Position - P1 <1lb (<0.45kg) 103028-028 Plug, 5mm, 5 Position - J3 <1lb (<0.45kg) ATX10 Accessories Part Number Description Ship Weight 012400-001 Acoustic Inspector Package <1lb (<0.45kg) 012401-001 Acoustic Configurator Package <1lb (<0.45kg) 012402-001 W6300G1004 Acoustic Software Connector (software not included) 1 lb (0.45 kg) 009700-001 Magnetic Tool <1lb (<0.45kg) 104218-001 35mm Socket for use with M25 model 1.8 lb (<0.8 kg) Stop Plugs Part Number Description Ship Weight 101197-004* Stop Plug, 3/4" NPT, SS <1 lb (<0.45 kg) 101197-003 Stop Plug, M25, SS, IP66 <1 lb (<0.45 kg) 010817-001* Stop Plug, 20 Pack, 3/4"NPT, SS 2 lb (0.9 kg) 010819-001 Stop Plug, 20 Pack, M25, SS,IP66 3.25 lb (1.5 kg) *NEMA Type 4X/IP66 rating requires Teflon tape.
Det-Tronics FlexVu UD10 Universal Display (for Toxics)

FlexVu UD10 Universal Display (Spec Sheet: 90-1200) is recommended for applications where a gas detector with digital read-out of detected gas levels are required. The FlexVu UD10 Universal Display Unit is designed for use with various Det-Tronics toxic gas sensor/transmitters such as GT3000, NTMOS or C706x. The display unit is designed and approved as a stand alone controller and performs all the functions of a gas controller. Compliance to ISA-92.0.01 Part 1 performance standard, and EN50104 for oxygen depletion Division Approval Ratings: FM and CSA Zone Approval Ratings: FM, CSA, ATEX, and IECEx DNV type approval - maritime/offshore Eagle Quantum Premier model Universal design supports a variety of Det-Tronics sensors/detectors Non-intrusive menu allows device configuration and calibration without de-classifying the hazardous area Continuously displays gas level, gas type, and units measured Data logger for event time and date stamping Heated backlit display Relay, modbus, and linear isolated/non-isolated 4-20 mA output with HART, configurable 4-20 mA output loop monitoring IP66 rated FlexVu UD10 Model Matrix MODEL DESCRIPTION UD10 Universal Display Unit TYPE MATERIAL A Aluminum S Stainless Steel (316) TYPE THREAD TYPE 5M 5 Port, Metric M25 5N 5 Port, 3/4" NPT TYPE OUTPUTS 25 Relay, 4-20mA, RS485, HART 28 EQP / DCU Emulator TYPE APPROVALS* B INMETRO (BRAZIL) R VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx W FM/CSA/ATEX/ICEx TYPE CLASSIFICATION (Div/Zone) 2 Ex d (Flameproof) TYPE OPTIONAL CONDITIONING BOARD N NTMOS† * Type Approvals can use one or more letters to designate the approvals of the product. † Not required for DCU Emulator model. FlexVu UD10 Universal Display - Toxics Model Part Number Material Threads Relay 4-20 RS485 HART EQP DCU Emulator Cond. Board FM/CSA/ ATEX/ IECEx SIL 2 UD10A5M25T2 010765-001 AL M25 X X X UD10A5N25T2 010765-002 AL 3/4 NPT X X X UD10S5M25T2 010765-003 316 SS M25 X X X UD10S5N25T2 010765-004 316 SS 3/4 NPT X X X UD10A5M28W2 010765-005 AL M25 X X UD10A5N28W2 010765-006 AL 3/4 NPT X X UD10S5M28W2 010765-007 316 SS M25 X X UD10S5N28W2 010765-008 316 SS 3/4 NPT X X UD10A5M25W2N 010252-001 AL M25 X NTMOS X UD10A5N25W2N 010252-002 AL 3/4 NPT X NTMOS X UD10S5M25W2N 010252-003 316 SS M25 X NTMOS X UD10S5N25W2N 010252-004 316 SS 3/4 NPT X NTMOS X Ship Weight: Aluminum = 4.2lb (1.9kg) Stainless Steel = 10.5lb (4.8kg) FlexVu UD10 Spare Modules Part Number Description Output Ship Weight 010569-001 UD10 Display Module Relay/4-20mA 1 lb (0.45 kg) 010535-001 UD10 Display Module EQP-DCU 1 lb (0.45 kg) FlexVu UD10 Accessories Part Number Description Ship Weight 009700-001 Magnetic Tool <1 lb (0.45 kg) 014019-001 Gas Inspector 11 CD <1 lb (0.45 kg) 014020-001 W6300G1006 Gas Inspector 11 Kit (includes CD) <1 lb (0.45 kg) 102988-002 Plug, 5.0mm, 6 Position - P2 <1 lb (0.45 kg) 102988-026 Plug, 5.0mm, 3 Position - P1 (J10, CGS) <1 lb (0.45 kg) 102988-028 Plug, 5.0mm, 5 Position - (J3, CGS) <1 lb (0.45 kg) 103726-002 Plug, 3.5mm, 3 Position - J2 <1 lb (0.45 kg) 103726-004 Plug, 3.5mm, 5 Position - J3 <1 lb (0.45 kg) 103726-011 Plug, 3.5mm, 12 Position - J4 <1 lb (0.45 kg) FlexVu UD10 Miscellaneous Spare Parts Part Number Description Ship Weight 011919-001 UD10/NTMOS REPLACEMENT BOARD <1 lb (<0.45 kg) Stop Plugs and Reducers Part Number Description Ship Weight 101197-001* Stop Plug, 3/4" NPT, AL <1 lb (<0.45 kg) 101197-004* Stop Plug, 3/4" NPT, SS <1 lb (<0.45 kg) 101197-005 Stop Plug, M25, AL, IP66 <1 lb (<0.45 kg) 101197-003 Stop Plug, M25, SS, IP66 <1 lb (<0.45 kg) 010816-001* Stop Plug, 20 Pack, 3/4"NPT, AL 1 lb (0.45 kg) 010817-001* Stop Plug, 20 Pack, 3/4"NPT, SS 2 lb (0.9 kg) 010818-001 Stop Plug, 20 Pack, M25, AL,IP66 1.5 lb (0.7 kg) 010819-001 Stop Plug, 20 Pack, M25, SS,IP66 3.25 lb (1.5 kg) 102804-001 Reducer, M25 to M20, AL <1 lb (<0.45 kg) 102804-003 Reducer, M25 to M20, SS <1 lb (<0.45 kg) *NEMA/TYPE 4 and IP66 rating requires addition of Teflon tape. FlexVu® UD10 Universal Display Repair / Upgrade Kit (Technical Bulletin: 76-1046) The UD10 Repair/Upgrade Kit allows field conversion of an existing U9500 Infiniti®Transmitter, Model 505 Transmitter, or Eagle Quantum Premier® Digital Communication Unit (DCU) to a FlexVu® UD10 Universal Display. The existing junction box base, along with the existing conduit and field wiring, can be left in place and do not need to be replaced. FlexVu UD10 Upgrade Kit - Toxics Model Part Number Material Threads Relay 4-20 RS485 HART EQP DCU Emulator FM/CSA/ ATEX/ IECEx SIL 2 UPGRADE KIT UD10A5M25T2 010970-001 AL M25 X X X UPGRADE KIT UD10A5N25T2 010970-002 AL 3/4 NPT X X X UPGRADE KIT UD10S5M25T2 010970-003 316 SS M25 X X X UPGRADE KIT UD10S5N25T2 010970-004 316 SS 3/4 NPT X X X UPGRADE KIT UD10A5M28W2 010970-005 AL M25 X X UPGRADE KIT UD10A5N28W2 010970-006 AL 3/4 NPT X X UPGRADE KIT UD10S5M28W2 010970-007 316 SS M25 X X UPGRADE KIT UD10S5N28W2 010970-008 316 SS 3/4 NPT X X Ship Weight: Aluminum = 3.5lb (1.6kg) Stainless Steel = 8.7lb (3.9kg)
Det-Tronics FlexVu UD10 Universal Display

FlexVu UD10 Universal Display (Spec Sheet: 90-1200) is recommended for applications that require a gas detector with digital read-out of detected gas levels. The FlexVu UD10 Universal Display Unit is designed for use with various Det-Tronics gas sensor/transmitters. The display unit is designed and approved as a stand-alone device and performs all the functions of a gas controller. Compliance to ANSI/ISA-12.13.01-2000 performance standard Compliance to ISA-92.0.01 Part 1 performance standard, and EN50104 for oxygen depletion Performance certified to FM 6310/6320, CSA 22.2 #152, ATEX EN60079-29-1, and IEC60079-29-1 Approved as a stand-alone combustible gas and low concentration toxic controller, when using the relay contacts Division Approval Ratings: FM and CSA Zone Approval Ratings: FM, CSA, ATEX, and IECEx Eagle Quantum Premier model Universal design supports a variety of Det-Tronics sensors/detectors Non-intrusive menu allows device configuration and calibration without de-classifying the hazardous area Continuously displays gas level, gas type, and units measured Data logger for event time and date stamping Heated and backlit display Relay, modbus, and linear isolated/non-isolated 4-20 mA output with HART, configurable 4-20 mA output loop monitoring IP66 rated FlexVu UD10 Model Matrix MODEL DESCRIPTION UD10 Universal Display Unit TYPE MATERIAL A Aluminum S Stainless Steel (316) TYPE THREAD TYPE 5M 5 Port, Metric M25 5N 5 Port, 3/4" NPT TYPE OUTPUTS 25 Relay, 4-20mA, RS485, HART 28 EQP / DCU Emulator TYPE APPROVALS* B INMETRO (BRAZIL) R VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx W FM/CSA/ATEX/IECEx TYPE CLASSIFICATION (Div/Zone) 2 Ex d (Flameproof) TYPE OPTIONAL CONDITIONING BOARD (Blank) None C CGS N NTMOS† * Type Approvals can use one or more letters to designate the approvals of the product. † Not required for DCU Emulator model. FlexVu UD10 Universal Display Model Part Number Material Threads Relay 4-20 RS485 HART EQP/DCU Emulator Cond. Board FM/CSA/ ATEX/IECEx SIL 2 UD10A5M25T2 010765-001 AL M25 X X X UD10A5N25T2 010765-002 AL 3/4 NPT X X X UD10S5M25T2 010765-003 316 SS M25 X X X UD10S5N25T2 010765-004 316 SS 3/4 NPT X X X UD10A5M28W2 010765-005 AL M25 X X UD10A5N28W2 010765-006 AL 3/4 NPT X X UD10S5M28W2 010765-007 316 SS M25 X X UD10S5N28W2 010765-008 316 SS 3/4 NPT X X UD10A5M25W2C 010254-001 AL M25 X CGS X UD10A5N25W2C 010254-002 AL 3/4 NPT X CGS X UD10S5M25W2C 010254-003 316 SS M25 X CGS X UD10S5N25W2C 010254-004 316 SS 3/4 NPT X CGS X UD10A5M28W2C 010254-005 AL M25 X CGS X UD10A5N28W2C 010254-006 AL 3/4 NPT X CGS X UD10S5M28W2C 010254-007 316 SS M25 X CGS X UD10S5N28W2C 010254-008 316 SS 3/4 NPT X CGS X UD10A5M25W2N 010252-001 AL M25 X NTMOS X UD10A5N25W2N 010252-002 AL 3/4 NPT X NTMOS X UD10S5M25W2N 010252-003 316 SS M25 X NTMOS X UD10S5N25W2N 010252-004 316 SS 3/4 NPT X NTMOS X Ship Weight: Aluminum = 4.2lb (1.9kg) Stainless Steel = 10.5lb (4.8kg) FlexVu UD10 Spare Modules Part Number Description Output Ship Weight 010569-001 UD10 Display Module Relay/4-20mA 1 lb (0.45 kg) 010535-001 UD10 Display Module EQP-DCU 1 lb (0.45 kg) FlexVu UD10 Miscellaneous Spare Parts Part Number Description Ship Weight 011919-001 UD10/NTMOS REPLACEMENT BOARD <1 lb (<0.45 kg) FlexVu UD10 Accessories Part Number Description Ship Weight 009700-001 Magnetic Tool <1 lb (0.45 kg) 014019-001 Gas Inspector 11 CD <1 lb (0.45 kg) 014020-001 W6300G1006 Gas Inspector 11 Kit (includes CD) <1 lb (0.45 kg) 102988-002 Plug, 5.0mm, 6 Position - P2 <1 lb (0.45 kg) 102988-026 Plug, 5.0mm, 3 Position - P1 (J10, CGS) <1 lb (0.45 kg) 102988-028 Plug, 5.0mm, 5 Position - (J3, CGS) <1 lb (0.45 kg) 103726-002 Plug, 3.5mm, 3 Position - J2 <1 lb (0.45 kg) 103726-004 Plug, 3.5mm, 5 Position - J3 <1 lb (0.45 kg) 103726-011 Plug, 3.5mm, 12 Position - J4 <1 lb (0.45 kg) Stop Plugs and Reducers Part Number Description Ship Weight 101197-001* Stop Plug, 3/4" NPT, AL <1 lb (<0.45 kg) 101197-004* Stop Plug, 3/4" NPT, SS <1 lb (<0.45 kg) 101197-005 Stop Plug, M25, AL, IP66 <1 lb (<0.45 kg) 101197-003 Stop Plug, M25, SS, IP66 <1 lb (<0.45 kg) 010816-001* Stop Plug, 20 Pack, 3/4"NPT, AL 1 lb (0.45 kg) 010817-001* Stop Plug, 20 Pack, 3/4"NPT, SS 2 lb (0.9 kg) 010818-001 Stop Plug, 20 Pack, M25, AL,IP66 1.5 lb (0.7 kg) 010819-001 Stop Plug, 20 Pack, M25, SS,IP66 3.25 lb (1.5 kg) 102804-001 Reducer, M25 to M20, AL <1 lb (<0.45 kg) 102804-003 Reducer, M25 to M20, SS <1 lb (<0.45 kg) *NEMA/TYPE 4 and IP66 rating requires addition of Teflon tape. FlexVu® UD10 Universal Display Repair / Upgrade Kit (Technical Bulletin: 76-1046) The UD10 Repair/Upgrade Kit allows field conversion of an existing U9500 Infiniti® Transmitter, Model 505 Transmitter, or Eagle Quantum Premier® Digital Communication Unit (DCU) to a FlexVu® UD10 Universal Display. The existing junction box base, along with the existing conduit and field wiring, can be left in place and do not need to be replaced. FlexVu UD10 Upgrade Kit Model Part Number Material Threads Relay 4-20 RS485 HART EQP/ DCU Emulator Cond. Board FM/ CSA/ ATEX/ IECEx SIL 2 UPGRADE KIT UD10A5M25T2 010970-001 AL M25 X X X UPGRADE KIT UD10A5N25T2 010970-002 AL 3/4 NPT X X X UPGRADE KIT UD10S5M25T2 010970-003 316 SS M25 X X X UPGRADE KIT UD10S5N25T2 010970-004 316 SS 3/4 NPT X X X UPGRADE KIT UD10A5M28W2 010970-005 AL M25 X X UPGRADE KIT UD10A5N28W2 010970-006 AL 3/4 NPT X X UPGRADE KIT UD10S5M28W2 010970-007 316 SS M25 X X UPGRADE KIT UD10S5N28W2 010970-008 316 SS 3/4 NPT X X UPGRADE KIT UD10A5M25W2C 010971-001 AL M25 X CGS X UPGRADE KIT UD10A5N25W2C 010971-002 AL 3/4 NPT X CGS X UPGRADE KIT UD10S5M25W2C 010971-003 316 SS M25 X CGS X UPGRADE KIT UD10S5N25W2C 010971-004 316 SS 3/4 NPT X CGS X UPGRADE KIT UD10A5M28W2C 010971-005 AL M25 X CGS X UPGRADE KIT UD10A5N28W2C 010971-006 AL 3/4 NPT X CGS X UPGRADE KIT UD10S5M28W2C 010971-007 316 SS M25 X CGS X UPGRADE KIT UD10S5N28W2C 010971-008 316 SS 3/4 NPT X CGS X Ship Weight: Aluminum = 3.5 lb (1.6 kg) Stainless Steel = 8.7 lb (3.9 kg)
Det-Tronics FlexVu UD10 Universal Display (for Catalytic)

FlexVu UD10 Universal Display (Spec Sheet: 90-1200) is recommended for applications where a gas detector with digital read-out of detected gas levels are required. The FlexVu UD10 Universal Display Unit is designed for use with various Det-Tronics catalytic gas sensor/ transmitters such as Model 505 or CGS. The display unit is designed and approved as a standalone device and performs all the functions of a gas controller. Compliance to ANSI/ISA-12.13.01-2000 performance standard Performance certified to FM 6310/6320, CSA 22.2 #152, ATEX EN60079-29-1, and IEC60079-29-1 Certified as a stand-alone combustible gas controller/detector when used with the CGS sensor Division Approval Ratings: FM and CSA Zone Approval Ratings: FM, CSA, ATEX, and IECEx Eagle Quantum Premier model Non-intrusive menu allows device configuration and calibration without de-classifying the hazardous area Continuously displays gas level, gas type, and units measured Data logger for event time and date stamping Heated and backlit LCD display Relay, modbus, and linear isolated/non-isolated 4-20 mA output with HART, configurable 4-20 mA output loop monitoring IP66 rated SIL2 certified when used with CGS combustible gas sensor FlexVu UD10 Model Matrix - CGS MODEL DESCRIPTION UD10 Universal Display Unit TYPE MATERIAL A Aluminum S Stainless Steel (316) TYPE THREAD TYPE 5M 5 Port, Metric M25 5N 5 Port, 3/4" NPT TYPE OUTPUTS 25 Relay, 4-20mA, RS485, HART 28 EQP / DCU Emulator TYPE APPROVALS B INMETRO (BRAZIL) R VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx W FM/CSA/ATEX/IECEx TYPE CLASSIFICATION (Div/Zone) 2 Ex d (Flameproof) TYPE OPTIONAL CONDITIONING BOARD C CGS Typical UD10/CGS Customer Proposal Qty Part Number Description 1 006824-003 Catalytic Combustible Gas Sensor (CGS), M20, CC 1 010254-001 UD10A5M25W2C Universal Display, AL, M25 2 101197-005 Stop plug, M25, AL 1 102804-001 Reducer, M25 to M20, AL Option Qty Part Number Description 1 226365-119 STB1A2MW Sensor Separation Termination Box Accessories Qty Part Number Description 1 225130-001 Methane Gas Calibration Kit, 50% LFL methane 1 226166-001 Spare 103 L gas cylinder, 50% LFL methane FlexVu UD10 Universal Display - CGS - SIL/FM/CSA/ATEX/IECEx Model Part Number Material Threads Relay 4-20 RS485 HART EQP-DCU Emulator Cond. Board SIL/FM/CSA/ ATEX/IECEx FM/CSA/ ATEX/IECEx UD10A5M25W2C 010254-001 AL M25 X CGS X UD10A5N25W2C 010254-002 AL 3/4 NPT X CGS X UD10S5M25W2C 010254-003 316 SS M25 X CGS X UD10S5N25W2C 010254-004 316 SS 3/4 NPT X CGS X UD10A5M25T2C 010254-021 AL M25 X CGS X UD10A5N25T2C 010254-022 AL 3/4 NPT X CGS X UD10S5M25T2C 010254-023 316 SS M25 X CGS X UD10S5N25T2C 010254-024 316 SS 3/4 NPT X CGS X UD10A5M28W2C 010254-005 AL M25 X CGS X UD10A5N28W2C 010254-006 AL 3/4 NPT X CGS X UD10S5M28W2C 010254-007 316 SS M25 X CGS X UD10S5N28W2C 010254-008 316 SS 3/4 NPT X CGS X Ship Weight: Aluminum = 4.2lb (1.9kg) Stainless Steel = 10.5lb (4.8kg) FlexVu UD10 Spare Modules Part Number Description Output Ship Weight 010569-001 UD10 Display Module Relay/4-20mA 1 lb (0.45 kg) 010535-001 UD10 Display Module EQP-DCU 1 lb (0.45 kg) FlexVu UD10 Spare Parts Part Number Description Ship Weight 010973-001 UD10/CGS REPLACEMENT BOARD <1 lb (<0.45 kg) FlexVu UD10 Accessories Part Number Description Ship Weight 009700-001 Magnetic Tool <1 lb (0.45 kg) 014019-001 Gas Inspector 11 CD <1 lb (0.45 kg) 014020-001 W6300G1006 Gas Inspector 11 Kit (includes CD) 1 lb (0.45 kg) 102988-002 Plug, 5.0mm, 6 Position - P2 <1 lb (0.45 kg) 102988-026 Plug, 5.0mm, 3 Position - P1 (J10, CGS) <1 lb (0.45 kg) 102988-028 Plug, 5.0mm, 5 Position - (J3, CGS) <1 lb (0.45 kg) 103726-002 Plug, 3.5mm, 3 Position - J2 <1 lb (0.45 kg) 103726-004 Plug, 3.5mm, 5 Position - J3 <1 lb (0.45 kg) 103726-011 Plug, 3.5mm, 12 Position - J4 <1 lb (0.45 kg) Stop Plugs and Reducers Part Number Description Ship Weight 101197-001* Stop Plug, 3/4" NPT, AL <1 lb (<0.45 kg) 101197-004* Stop Plug, 3/4" NPT, SS <1 lb (<0.45 kg) 101197-005 Stop Plug, M25, AL, IP66 <1 lb (<0.45 kg) 101197-003 Stop Plug, M25, SS, IP66 <1 lb (<0.45 kg) 010816-001* Stop Plug, 20 Pack, 3/4"NPT, AL 1 lb (0.45 kg) 010817-001* Stop Plug, 20 Pack, 3/4"NPT, SS 2 lb (0.9 kg) 010818-001 Stop Plug, 20 Pack, M25, AL,IP66 1.5 lb (0.7 kg) 010819-001 Stop Plug, 20 Pack, M25, SS,IP66 3.25 lb (1.5 kg) 102804-001 Reducer, M25 to M20, AL <1 lb (<0.45 kg) 102804-003 Reducer, M25 to M20, SS <1 lb (<0.45 kg) *NEMA/TYPE 4 and IP66 rating requires addition of Teflon tape. FlexVu® UD10 Universal Display Repair / Upgrade Kit (Technical Bulletin: 76-1046) The UD10 Repair/Upgrade Kit allows field conversion of an existing U9500 Infiniti® Transmitter, Model 505 Transmitter, or Eagle Quantum Premier® Digital Communication Unit (DCU) to a FlexVu® UD10 Universal Display. The existing junction box base, along with the existing conduit and field wiring, can be left in place and do not need to be replaced. FlexVu UD10 Upgrade Kit - CGS Model Part Number Material Threads Relay 4-20 RS485 HART EQPDCU Emulator Cond. Board FM/CSA/ ATEX/ IECEx UPGRADE KIT UD10A5M25W2C 010971-001 AL M25 X CGS X UPGRADE KIT UD10A5N25W2C 010971-002 AL 3/4 NPT X CGS X UPGRADE KIT UD10S5M25W2C 010971-003 316 SS M25 X CGS X UPGRADE KIT UD10S5N25W2C 010971-004 316 SS 3/4 NPT X CGS X UPGRADE KIT UD10A5M28W2C 010971-005 AL M25 X CGS X UPGRADE KIT UD10A5N28W2C 010971-006 AL 3/4 NPT X CGS X UPGRADE KIT UD10S5M28W2C 010971-007 316 SS M25 X CGS X UPGRADE KIT UD10S5N28W2C 010971-008 316 SS 3/4 NPT X CGS X UPGRADE KIT UD10A5M25T2C 010971-011 AL M25 X UPGRADE KIT UD10A5N25T2C 010971-012 AL 3/4 NPT X UPGRADE KIT UD10S5M25T2C 010971-013 316 SS M25 X UPGRADE KIT UD10S5N25T2C 010971-014 316 SS 3/4 NPT X Ship Weight: Aluminum = 3.5lb (1.6kg) Stainless Steel = 8.7lb (3.9kg)
Det-Tronics FlexVu UD10 Universal Display (for Infrared)

FlexVu UD10 Universal Display (Spec Sheet: 90-1200) is recommended for applications where a gas detector with digital read-out of detected gas levels are required. The FlexVu UD10 Universal Display Unit is designed for use with various Det-Tronics infrared gas sensor/transmitters such as PIRECL, PIR9400, PIRDUCT, or LS2000. The display unit is designed and approved as a stand-alone controller when connected to a certified gas detector and performs all the functions of a gas controller. Compliance to ANSI/ISA-12.13.01-2000 performance standard Performance certified to FM 6310/6320, CSA 22.2 #152, ATEX EN60079-29-1 Division Approval Ratings: FM and CSA Zone Approval Ratings: FM, CSA, ATEX, and IECEx Eagle Quantum Premier model Universal design supports a variety of Det-Tronics sensors/detectors Non-intrusive menu allows device configuration and calibration without de-classifying the hazardous area Continuously displays gas level, gas type, and units measured Data logger for event time and date stamping Heated and backlit display Relay, modbus, and linear isolated/non-isolated 4-20 mA output with HART, configurable 4-20 mA output loop monitoring FDT/DTM capable IP66 rated FlexVu UD10 Model Matrix MODEL DESCRIPTION UD10 Universal Display Unit TYPE MATERIAL A Aluminum S Stainless Steel (316) TYPE THREAD TYPE 5M 5 Port, Metric M25 5N 5 Port, 3/4" NPT TYPE OUTPUTS 25 Relay, 4-20mA, RS485, HART 28 EQP / DCU Emulator TYPE APPROVALS* B INMETRO (BRAZIL) R VNIIFTRI (RUSSIA) S SIL T SIL/FM/CSA/ATEX/IECEx W FM/CSA/ATEX/IECEx TYPE CLASSIFICATION (Div/Zone) 2 Ex d (Flameproof) * Type Approvals can use one or more letters to designate the approvals of the product. FlexVu UD10 Universal Display - Infrared - FM/CSA/ATEX/IECEx Model Part Number Material Threads Relay 4-20 RS485 HART EQP DCU Emulator SIL 2 UD10A5M25T2 010765-001 AL M25 X X UD10A5N25T2 010765-002 AL 3/4 NPT X X UD10S5M25T2 010765-003 316 SS M25 X X UD10S5N25T2 010765-004 316 SS 3/4 NPT X X UD10A5M28W2 010765-005 AL M25 X UD10A5N28W2 010765-006 AL 3/4 NPT X UD10S5M28W2 010765-007 316 SS M25 X UD10S5N28W2 010765-008 316 SS 3/4 NPT X Ship Weight: Aluminum = 4.2lb (1.9kg) Stainless Steel = 10.5lb (4.8kg) FlexVu UD10 Spare Modules Part Number Description Output Ship Weight 010569-001 UD10 Display Module Relay/4-20mA 1 lb (0.45 kg) 010535-001 UD10 Display Module EQP-DCU 1 lb (0.45 kg) FlexVu UD10 Miscellaneous Spare Parts Part Number Description Ship Weight 010973-001 UD10/CGS REPLACEMENT BOARD <1 lb (<0.45 kg) 011919-001 UD10/NTMOS REPLACEMENT BOARD <1 lb (<0.45 kg) FlexVu UD10 Accessories Part Number Description Ship Weight 009700-001 Magnetic Tool <1 lb (0.45 kg) 014019-001 Gas Inspector 11 CD <1 lb (0.45 kg) 014020-001 W6300G1006 Gas Inspector 11 Kit (includes CD) 1 lb (0.45 kg) 102988-002 Plug, 5.0mm, 6 Position - P2 <1 lb (0.45 kg) 102988-026 Plug, 5.0mm, 3 Position - P1 (J10, CGS) <1 lb (0.45 kg) 102988-028 Plug, 5.0mm, 5 Position - (J3, CGS) <1 lb (0.45 kg) 103726-002 Plug, 3.5mm, 3 Position - J2 <1 lb (0.45 kg) 103726-004 Plug, 3.5mm, 5 Position - J3 <1 lb (0.45 kg) 103726-011 Plug, 3.5mm, 12 Position - J4 <1 lb (0.45 kg) Stop Plugs and Reducers Part Number Description Ship Weight 101197-001* Stop Plug, 3/4" NPT, AL <1 lb (<0.45 kg) 101197-004* Stop Plug, 3/4" NPT, SS <1 lb (<0.45 kg) 101197-005 Stop Plug, M25, AL, IP66 <1 lb (<0.45 kg) 101197-003 Stop Plug, M25, SS, IP66 <1 lb (<0.45 kg) 010816-001* Stop Plug, 20 Pack, 3/4"NPT, AL 1 lb (0.45 kg) 010817-001* Stop Plug, 20 Pack, 3/4"NPT, SS 2 lb (0.9 kg) 010818-001 Stop Plug, 20 Pack, M25, AL,IP66 1.5 lb (0.7 kg) 010819-001 Stop Plug, 20 Pack, M25, SS,IP66 3.25 lb (1.5 kg) 102804-001 Reducer, M25 to M20, AL <1 lb (<0.45 kg) 102804-003 Reducer, M25 to M20, SS <1 lb (<0.45 kg) *NEMA/TYPE 4 and IP66 rating requires addition of Teflon tape. FlexVu® UD10 Universal Display Repair / Upgrade Kit (Technical Bulletin: 76-1046) The UD10 Repair/Upgrade Kit allows field conversion of an existing U9500 Infiniti® Transmitter, Model 505 Transmitter, or Eagle Quantum Premier Digital Communication Unit (DCU) to a FlexVu® UD10 Universal Display. The existing junction box base, along with the existing conduit and field wiring, can be left in place and do not need to be replaced. FlexVu UD10 Upgrade Kit - Infrared Model Part Number Material Threads Relay 4-20 RS485 HART EQP DCU Emulator FM/CSA/ATEX/IECEx SIL 2 UPGRADE KIT UD10A5M25T2 010970-001 AL M25 X X X UPGRADE KIT UD10A5N25T2 010970-002 AL 3/4 NPT X X X UPGRADE KIT UD10S5M25T2 010970-003 316 SS M25 X X X UPGRADE KIT UD10S5N25T2 010970-004 316 SS 3/4 NPT X X X UPGRADE KIT UD10A5M28W2 010970-005 AL M25 X X UPGRADE KIT UD10A5N28W2 010970-006 AL 3/4 NPT X X UPGRADE KIT UD10S5M28W2 010970-007 316 SS M25 X X UPGRADE KIT UD10S5N28W2 010970-008 316 SS 3/4 NPT X X Ship Weight: Aluminum = 3.5lb (1.6kg) Stainless Steel = 8.7lb (3.9kg)
Det-Tronics FlexVu UD10-DCU Universal Display

FlexVu UD10-DCU Universal Display (Spec Sheet 90-1200) is recommended for applications that require a gas detector with digital readout of detected gas levels. Its LON interface board makes the FlexVu UD10 compatible with Eagle Quantum Premier systems by digitizing the 4-20 mA analog signal from the attached sensor/transmitter and transmitting the value as a process variable over the LON to the EQP controller. The UD10 is designed for use with a variety of Det-Tronics gas sensors for combustible and toxic detection, GT3000 and C7064E. When used with the EQP controller, it meets all gas performance standards. Compliance to ANSI/ISA-12.13.01-2000 performance standard Compliance to ISA-92.0.01 Part 1 performance standard, and EN50104 for oxygen depletion Performance certified to FM 6310/6320, CSA 22.2 #152, ATEX EN60079-29-1, and IEC60079-29-1 Division Approval Ratings: FM and CSA Zone Approval Ratings: FM, CSA, ATEX, and IECEx Accepts 4-20 mA input from a variety of detection devices (gas, flame, pressure, flow, etc.) Compatible with FlexSonic Acoustic leak detector AC100/ATX10, providing spectrum display and configuration setup menus Non-intrusive menu allows device calibration without de-classifying the hazardous area Continuously displays gas level, gas type, and units measured Alarm setpoints adjustable via network Data logger for event time and date stamping Heated and backlit display IP66 rated Emulates the EQ22xxDCU for direct replacement Replaces EQ2200 DCUEX for direct replacement FlexVu UD10 DCU Model Matrix MODEL DESCRIPTION UD10 Universal Display Unit TYPE MATERIAL A Aluminum S Stainless Steel (316) TYPE THREAD TYPE 5M 5 Port, Metric M25 5N 5 Port, 3/4" NPT TYPE OUTPUTS 28 EQP - DCU Emulator TYPE APPROVALS B INMETRO (BRAZIL) R VNIIFTRI (RUSSIA) W FM/CSA/ATEX/IECEx TYPE CLASSIFICATION (Div/Zone) 2 Ex d (Flameproof) TYPE OPTIONAL CONDITIONING BOARD C CGS FlexVu UD10-DCU Universal Display Model Part Number Material Threads EQP-DCU Emulator Cond. Board FM/CSA/ ATEX/IECEx UD10A5M28W2 010765-005 AL M25 X X UD10A5N28W2 010765-006 AL 3/4 NPT X X UD10S5M28W2 010765-007 316 SS M25 X X UD10S5N28W2 010765-008 316 SS 3/4 NPT X X Ship Weight: Aluminum = 4.2lb (1.9kg) Stainless Steel = 10.5lb (4.8kg) FlexVu UD10-DCU Universal Display - CGS Model Part Number Material Threads EQP-DCU Emulator Cond. Board FM/CSA/ ATEX/IECEx UD10A5M28W2C 010254-005 AL M25 X CGS X UD10A5N28W2C 010254-006 AL 3/4 NPT X CGS X UD10S5M28W2C 010254-007 316 SS M25 X CGS X UD10S5N28W2C 010254-008 316 SS 3/4 NPT X CGS X Ship Weight: Aluminum = 4.2lb (1.9kg) Stainless Steel = 10.5lb (4.8kg) FlexVu UD10 Spare Module Part Number Description Output Ship Weight 010535-001 UD10 Display Module EQP-DCU 1 lb (0.45 kg) FlexVu UD10 Accessories Part Number Description Ship Weight 009700-001 Magnetic Tool <1 lb (0.45 kg) 014019-001 Gas Inspector 11 CD <1 lb (0.45 kg) 014020-001 W6300G1006 Gas Inspector 11 Kit (includes CD) <1 lb (0.45 kg) 102988-002 Plug, 5.0mm, 6 Position - P2 <1 lb (0.45 kg) 102988-026 Plug, 5.0mm, 3 Position - P1 (J10, CGS) <1 lb (0.45 kg) 102988-028 Plug, 5.0mm, 5 Position - (J3, CGS) <1 lb (0.45 kg) 103726-002 Plug, 3.5mm, 3 Position - J2 <1 lb (0.45 kg) 103726-004 Plug, 3.5mm, 5 Position - J3 <1 lb (0.45 kg) 103726-011 Plug, 3.5mm, 12 Position - J4 <1 lb (0.45 kg) Stop Plugs and Reducers Part Number Description Ship Weight 101197-001* Stop Plug, 3/4" NPT, AL <1 lb (<0.45 kg) 101197-004* Stop Plug, 3/4" NPT, SS <1 lb (<0.45 kg) 101197-005 Stop Plug, M25, AL, IP66 <1 lb (<0.45 kg) 101197-003 Stop Plug, M25, SS, IP66 3.25 lb (1.5 kg) 010816-001* Stop Plug, 20 Pack, 3/4"NPT, AL 1 lb (0.45 kg) 010817-001* Stop Plug, 20 Pack, 3/4"NPT, SS 2 lb (0.9 kg) 010818-001 Stop Plug, 20 Pack, M25, AL,IP66 1.5 lb (0.7 kg) 010819-001 Stop Plug, 20 Pack, M25, SS,IP66 3.25 lb (1.5 kg) 102804-001 Reducer, M25 to M20, AL <1 lb (<0.45 kg) 102804-003 Reducer, M25 to M20, SS <1 lb (<0.45 kg) *NEMA/TYPE 4 and IP66 rating requires addition of Teflon tape.
Det-Tronics FlexVu UD20 Universal Display

FlexVu UD20 Universal Display (Spec Sheet: 90-1201 - Explosion-proof Model, 90-1205 - Intrinsically Safe Model) supports the GT3000 Series toxic gas detectors. Compliance to ANSI/ISA-60079-11 and ISA-92.0.01 Part 1 performance standard Division Approval Ratings: FM and CSA Zone Approval Ratings: FM, CSA, ATEX, and IECEx LCD display Non-intrusive automatic calibration Non-intrusive menu system Linear 4-20 mA output with HART Explosion-proof design IP66 rated 2 wire loop powered Certified Non-Interfering with GT3000 SIL model FlexVu UD20 Model Matrix MODEL DESCRIPTION UD20 Universal Display Unit TYPE MATERIAL A Aluminum S Stainless Steel (316) TYPE THREAD TYPE 5M 5 Port, Metric M25 5N 5 Port, 3/4" NPT TYPE OUTPUTS 26 Pass-Through 4-20mA, HART TYPE APPROVALS* B INMETRO (BRAZIL) R VNIIFTRI (RUSSIA) W FM/CSA/ATEX/IECEx TYPE CLASSIFICATION (Div/Zone) 2 Ex d (Flameproof) 4 Ex ia (intrinsically safe) FlexVu UD20 Universal Display - FM/CSA/ATEX/IECEx Model Part Number Material Threads Pass-Through 4-20 HART Ex d Ex ia FM/CSA/ ATEX/IECEx UD20A5M26W2 009791-001 AL M25 X X X UD20A5N26W2 009791-002 AL 3/4 NPT X X X UD20S5M26W2 009791-003 316 SS M25 X X X UD20S5N26W2 009791-004 316 SS 3/4 NPT X X X UD20A5M26W4 009791-005* AL M25 X X X UD20A5N26W4 009791-006* AL 3/4 NPT X X X UD20S5M26W4 009791-007* SS M25 X X X UD20S5N26W4 009791-008* SS 3/4 NPT X X X Ship Weight: Aluminum = 4.2lb (1.9kg) Stainless Steel = 10.5lb (4.8kg) FlexVu UD20 Spares Part Number Description Pass-Through 4-20 / HART Ship Weight 009793-002 UD20 Display Module X 1 lb (0.45 kg) FlexVu UD20 Accessories Part Number Description Ship Weight 009700-001 Magnetic Tool <1 lb (0.45 kg) 010253-001 Kit, 250Ω Terminating Resistor <1 lb (0.45 kg) Stop Plugs and Reducers Part Number Description Ship Weight 101197-001* Stop Plug, 3/4" NPT, AL <1 lb (<0.45 kg) 101197-004* Stop Plug, 3/4" NPT, SS <1 lb (<0.45 kg) 101197-005 Stop Plug, M25, AL, IP66 <1 lb (<0.45 kg) 101197-003 Stop Plug, M25, SS, IP66 <1 lb (<0.45 kg) 010816-001* Stop Plug, 20 Pack, 3/4"NPT, AL 1 lb (0.45 kg) 010817-001* Stop Plug, 20 Pack, 3/4"NPT, SS 2 lb (0.9 kg) 010818-001 Stop Plug, 20 Pack, M25, AL,IP66 1.5 lb (0.7 kg) 010819-001 Stop Plug, 20 Pack, M25, SS,IP66 3.25 lb (1.5 kg) 102804-001 Reducer, M25 to M20, AL <1 lb (<0.45 kg) 102804-003 Reducer, M25 to M20, SS <1 lb (<0.45 kg) *NEMA/TYPE 4 and IP66 rating requires addition of Teflon tape.
Det-Tronics GT3000 Certified Calibration Kits

GT3000 Certified Calibration Kits (Manual: 95-8643) consists of a sturdy carrying case containing: Configuration 1 GT3000 calibration kit with two cylinders of calibration gas Two cylinders of Class 2.2 non-flammable, non-toxic compressed gas A 1 liter/minute regulator and pressure indicator 3-foot tube GT3000 Calibration Cup Configuration 2 GT3000 calibration kit with one cylinder of calibration gas and one humidifier One cylinder of Class 2.2 non-flammable, non-toxic compressed gas One humidifier A 1 liter/minute regulator and pressure indicator 3-foot tube GT3000 Calibration Cup GT3000 Calibration Gas Kits Part Number Concentration Gas Balance Cylinders Humidifier Ship Weight 010274-001 10 ppm Hydrogen Sulfide Nitrogen 2 11.5 lb (5.23 kg) 010274-002 25 ppm Hydrogen Sulfide Nitrogen 2 11.5 lb (5.23 kg) 010274-003* 50 ppm Hydrogen Sulfide Nitrogen 2 11.5 lb (5.23 kg) 010274-004 5 ppm Chlorine Nitrogen 2 11.5 lb (5.23 kg) 010274-005 50 ppm Ammonia Nitrogen 2 11.5 lb (5.23 kg) 010274-006 250 ppm Ammonia Nitrogen 2 11.5 lb (5.23 kg) 010274-008 500 ppm Hydrogen Air 2 11.5 lb (5.23 kg) 010274-009 20.90% Oxygen Nitrogen 2 11.5 lb (5.23 kg) 010274-010 50 ppm Carbon Monoxide Air 2 11.5 lb (5.23 kg) 010274-011 250 ppm Carbon Monoxide Air 2 11.5 lb (5.23 kg) 010274-013 10 ppm Sulfur Dioxide Nitrogen 2 11.5 lb (5.23 kg) 010274-014 50 ppm Sulfur Dioxide Nitrogen 2 11.5 lb (5.23 kg) 010274-016 10 ppm Nitrogen Dioxide Air 2 11.5 lb (5.23 kg) 014059-001 5 ppm Chlorine Nitrogen 1 1 11.5 lb (5.23 kg) *Do not use for NTMOS. GT3000 Calibration Gas Kit Replacement Cylinders Part Number Concentration Gas Balance Cylinders 227117-011 10 ppm Hydrogen Sulfide Nitrogen 1.5 lb (0.7 kg) 227117-012 25 ppm Hydrogen Sulfide Nitrogen 1.5 lb (0.7 kg) 227117-001* 50 ppm Hydrogen Sulfide Nitrogen 1.5 lb (0.7 kg) 227117-006 5 ppm Chlorine Nitrogen 1.5 lb (0.7 kg) 227117-013 50 ppm Ammonia Nitrogen 1.5 lb (0.7 kg) 227117-019 250 ppm Ammonia Nitrogen 1.5 lb (0.7 kg) 227117-018 500 ppm Hydrogen Air 1.5 lb (0.7 kg) 226166-006 20.90% Oxygen Nitrogen 1.5 lb (0.7 kg) 227117-003 50 ppm Carbon Monoxide Air 1.5 lb (0.7 kg) 227117-004 250 ppm Carbon Monoxide Air 1.5 lb (0.7 kg) 227117-016 10 ppm Sulfur Dioxide Nitrogen 1.5 lb (0.7 kg) 227117-008 50 ppm Sulfur Dioxide Nitrogen 1.5 lb (0.7 kg) 227117-010 10 ppm Nitrogen Dioxide Air 1.5 lb (0.7 kg) *Do not use for NTMOS. GT3000 Calibration Kit Replacement Parts Part Number Description Ship Weight 009700-001 Magnetic Tool <1 lb (0.45 kg) 009737-001 GT3000 Calibration Cup 8 oz (0.23 kg) 107427-059 O-ring for Calibration Cup <1 lb (0.45 kg) 010780-003 GT3000 Remote Calibration Adaptor <1 lb (0.45 kg) 101678-007 Tubing, 3 ft. 8 oz (0.23 kg) 101678-013 Tubing, 100 ft. spool 8 oz (0.23 kg) 162552-001 Regulator, 1 LPM 8 oz (0.23 kg) 162553-001 Carrying Case 8 oz (0.23 kg)
Det-Tronics GTS Toxic Gas Sensor Module (GT3000 Series)

GTS Toxic Gas Sensor Module (Spec Sheet: 90-1199) housings are incorporated into the GTX toxic gas transmitter. The electrochemical cell is embedded in the module. Performance approved models NEW! Plus (+) series sensors with dual reservoir technology and extended temperature range Sensor modules are available in a variety of gas types and concentration ranges Hot-swappable capabilities with the GTX transmitter Easy install and removal with the GTX transmitter Intrinsically safe (IS) design SIL models available for Hydrogen Sulfide and Oxygen sensors DNV models available with Hydrogen Sulfide sensors Suitable for outdoor applications requiring IP66 rating Electrochemical sensor cell for increased accuracy, stability, and reliability Highly specific response reduces the chance of false alarms resulting from the presence of other gases Temperature compensated to ensure consistent performance over entire operating temperature range Hydrophobic filter easily replaced without opening the device or use of tools EMI/RFI hardened Event and calibration logs are stored in non-volatile memory and are accessible using a UD10/UD20, HART device, or AMS software. FDT/DTM capable Real-time clock with battery back-up GTS Model Matrix MODEL DESCRIPTION GTS Toxic Gas Sensor Module TYPE GAS / RANGE H2S+ Hydrogen Sulfide (certified SIL 2 capable) 20P 0 - 20 PPM 50P 0 - 50 PPM 100P 0 - 100 PPM CL2 Chlorine 10P 0 - 10 PPM NH3 Ammonia 100P 0 - 100 PPM 500P 0 - 500 PPM H2 Hydrogen 1000P 0 - 1000 PPM O2 Oxygen (certified SIL 2 capable) 25V 0 - 25 % by Vol CO Carbon Monoxide 100P 0 - 100 PPM 500P 0 - 500 PPM SO2+ Sulfur Dioxide 20P 0 - 20 PPM 100P 0 - 100 PPM NO2 Nitrogen Dioxide 20P 0 - 20 PPM TYPE SAFETY INTEGRITY LEVEL S SIL 2 N NON-SIL TYPE LABEL C CHINESE E ENGLISH K KAZAKH P PORTUGUESE (Brazil) R RUSSIA TYPE HOUSING S STANDARD E ENHANCED SHIELDING GTS Toxic Gas Sensor Module - ENGLISH Model Number Part Number Toxic Gas ppm Range % by Volume GTSH2S+20PSEE1 009471-3411 H2S 0-20 GTSH2S+50PSEE1 009471-3421 H2S 0-50 GTSH2S+100PSES2 009471-3432 H2S 0-100 GTSH2S+100PSEE1 009471-3441 H2S 0-100 GTSCL210PNES3 009471-3043 Cl2 0-10 GTSNH3100PNES2 009471-3052 NH3 0-100 GTSNH3500PNES3 009471-3063 NH3 0-500 GTSH21000PNES3 009471-3083 H2 0-1000 GTSO225VSES3 009471-3093 O2 0-25% GTSCO100PNES2 009471-3102 CO 0-100 GTSCO500PNES2 009471-3112 CO 0-500 GTSSO2+20PNES3 009471-3133 SO2 0-20 GTSSO2+100PNES3 009471-3143 SO2 0-100 GTSNO220PNES3 009471-3163 NO2 0-20 NOTE: Refer to the GT3000 Instruction Manual 95-8616 for details on performance approvals. NOTES: GTS Approval when paired with approriate GTX approval type GTX approval types 1 DNV/FM/CSA/IECEx N 2 FM/CSA/IECEx N 3 CSA/IECEx N Sensor Comparison Gas Range Response Time1 Accuracy of Reading (Whichever is Greater) Operating Temperature Range Zero Drift Performance Approved Standard Hydrogen Sulfide (H2S) 0-20 ppm T20 = ≤7 Sec. T50 = ≤10 Sec. T90 = ≤16 Sec. ±2 ppm or ±10% of Reading –40°C to +50°C ± 1 ppm/Mo. ISA 92.00.014 Hydrogen Sulfide (H2S) 0-50 ppm T20 = ≤4 Sec. T50 = ≤7 Sec. T90 = ≤16 Sec. ±2 ppm or ±10% of Reading –40°C to +50°C ± 1 ppm/Mo. ISA 92.00.014 Hydrogen Sulfide (H2S) 0-100 ppm T20 = ≤5 Sec. T50 = ≤8 Sec. T90 = ≤21 Sec. ±2 ppm or ±10% of Reading –40°C to +50°C ± 2 ppm/Mo. ISA 92.00.014 Hydrogen Sulfide (H2S+) 0-20 ppm T20 = ≤10 Sec. T50 = ≤13 Sec. T90 = ≤23 Sec. ±2 ppm or ±10% of Reading –40°C to +55°C ± 1 ppm/Mo. ISA 92.00.014 Hydrogen Sulfide (H2S+) 0-50 ppm T20 = ≤6 Sec. T50 = ≤9 Sec. T90 = ≤15 Sec. ±2 ppm or ±10% of Reading –40°C to +55°C ± 1 ppm/Mo. ISA 92.00.014 Hydrogen Sulfide (H2S+) 0-100 ppm T20 = ≤6 Sec. T50 = ≤8 Sec. T90 = ≤15 Sec. ±2 ppm or ±10% of Reading –40°C to +55°C ± 2 ppm/Mo. ISA 92.00.014 Ammonia (NH3) 0-100 ppm2 T50 = 24 Sec. T90 = 65 Sec. ±4 ppm or ±10% of Reading –20°C to +40°C ± 2 ppm/Mo. FM63404 Ammonia (NH3) 0-500 ppm2 T50 = 30 Sec. T90 = 120 Sec. ±4 ppm or ±10% of Reading –20°C to +40°C ± 10 ppm/Mo. Det-Tronics Verified Oxygen (O2) 0-25% V/V3 T20 = 7 Sec. T90 = 30 Sec. < 0.5% V/V –20°C to +50°C < 2 %/Mo. Det-Tronics Verified Carbon Monoxide (CO) 0-100 ppm T50 = 15 Sec. T90 = 40 Sec. ±5 ppm or ±10% of Reading –20°C to +50°C ± 2 ppm/Mo. ISA 92.00.014 Carbon Monoxide (CO) 0-500 ppm T50 = 12 Sec. T90 = 25 Sec. ±5 ppm or ±10% of Reading –40°C to +50°C ± 9 ppm/Mo. ISA 92.00.014 Sulfur Dioxide (SO2+) 0-20 ppm T50 = 12 Sec. T90 = 30 Sec. ±0.6 ppm or ±10% of Reading –40°C to +55°C ± 0.4 ppm/Mo. Det-Tronics Verified Sulfur Dioxide (SO2+) 0-100 ppm T50 = 15 Sec. T90 = 35 Sec. ±0.6 ppm or ±10% of Reading –20°C to +55°C ± 0.4 ppm/Mo. Det-Tronics Verified Chlorine (Cl2) 0-10 ppm T50 = ≤14 Sec. T90 = ≤34 Sec. ±0.6 ppm or ±10% of Reading –20°C to +50°C < 0.2 ppm/Mo. Det-Tronics Verified Hydrogen (H2) 0-1000 ppm T50 = 8 Sec. T90 = 60 Sec. ±50 ppm or ±10% of Reading –20°C to +40°C ± 20 ppm/Mo. Det-Tronics Verified Nitrogen Dioxide (NO2) 0-20 ppm T50 = 7 Sec. T90 = 31 Sec. ±2 ppm or ±10% of Reading –20°C to +40°C ± 0.1 ppm/Mo. Det-Tronics VerifiedZ 1 Time to reach percentage of final reading when gas concentration equal to full scale is applied to sensor. 2 Background concentrations of ammonia may shorten lifetime of sensor. 3 Sensor approved for oxygen depletion (< 21% V/V) only. 4 Factory Mutual Performance Approved. Model Q912 Duct Mount Enclosure The Model Q912 Duct Mount Enclosure provides reliable detection of toxic gases within air-handling ductwork. The device mounts directly to the ductwork, and uses a cross-sectional inlet and outlet sampling tube arrangement that allows large volume air sampling. The Q912 is compatible with the entire Det-Tronics GT3000 family of gas detectors, and is suitable for hazardous industrial and commercial applications. Stainless steel NEMA 4X enclosure Stainless steel sample inlet tube spans the duct’s cross section 1, 3, 6, 10 or 13 ft (0.3, 0.9, 1.8, 3.1 or 4 meter) inlet tube options 1 ft (0.3 m) outlet tube returns the sample Requires a 600–4000 fpm velocity Designed for flat surface mounting only Model Q912 Toxic Duct Mount Enclosure Part Number Description* Detector Conduit Inlet Tube Length 012513-001 Q912 Duct Mount M25, 1ft inlet M25 1 ft (0.3m) 012513-003 Q912 Duct Mount M25, 3ft inlet M25 3 ft (0.9m) 012513-006 Q912 Duct Mount M25, 6ft inlet M25 6 ft (1.8m) 012513-010 Q912 Duct Mount M25, 10ft inlet M25 10 ft (3.1m) 012513-013 Q912 Duct Mount M25, 13ft inlet M25 13 ft (4m) 012514-001 Q912 Duct Mount 3/4", 1ft inlet 3/4" 1 ft (0.3m) 012514-003 Q912 Duct Mount 3/4", 3ft inlet 3/4" 3 ft (0.9m) 012514-006 Q912 Duct Mount 3/4", 6ft inlet 3/4" 6 ft (1.8m) 012514-010 Q912 Duct Mount 3/4", 10ft inlet 3/4" 10 ft (3.1m) 012514-013 Q912 Duct Mount 3/4", 13ft inlet 3/4" 13 ft (4m) 012363-001 Spare Diffuser Insert *1 ft outlet tube included with each duct mount. Model Q912 Spare Parts Part Number Description* Length Material Ship Weight 000214-281 Inlet Tube 1 ft (0.3 m) 316 SS 8 oz (0.23 kg) 000214-282 Inlet Tube 3 ft (0.9 m) 316 SS 1 lb (0.45 kg) 000214-283 Inlet Tube 6 ft (1.8 m) 316 SS 3 lb (1.35 kg) 000214-284 Inlet Tube 10 ft (3.1 m) 316 SS 6 lb (2.4 kg) 000214-285 Inlet Tube 13 ft (4 m) 316 SS 9 lb (4.0 kg) 000214-280 Outlet Tube 1 ft (0.3 m) 316 SS 8 oz (0.23 kg) 102359-001 Stopper Plug N/A Rubber <1 lb (<0.45 kg)
Det-Tronics GTX Toxic Gas Transmitter (GT3000 Series)

GTX Toxic Gas Transmitter (Spec Sheet: 90-1199). Stainless steel, toxic gas transmitter that provides an accurate measurement of toxic gasses. 316 Stainless Steel Approved as a stand-alone device when combined with a GTS toxic gas sensor 4-20 mA output with HART Intrinsically safe (IS) or Explosion-proof design IP66 rated SIL 2 capable sensors are Hydrogen Sulfide and Oxygen Performance approved and verified Self-contained transmitter circuitry Event and calibration logs are stored in non-volatile memory and are accessible using a UD10/UD20, HART device, AMS software, or Gas Inspector. FDT/DTM capable Real-time clock with battery back-up Magnetic switch and LEDs for user interface 2-wire loop powered GTX Model Matrix MODEL DESCRIPTION GTX Toxic Gas Transmitter TYPE MATERIAL S Stainless Steel (316) TYPE THREAD TYPE N 3/4" NPT M Metric M25 TYPE OUTPUTS 26 4-20 mA w/HART (3.5 mA fault) 29 4-20 mA w/HART (2.45 mA fault) TYPE APPROVALS B INMETRO (Brazil) K KAZAKH N FM/CSA/IEXEx R RUSSIA Y CHINA TYPE CLASSIFICATION (Division/Zone) 4 Intrinsically Safe 5 Explosion-proof GTX Toxic Gas Transmitter (for use with FlexVu models UD10/20, and GDTB) Model Number Part Number Threads IS Ex Proof Approvals GTXSN26N4 009480-321 3/4 NPT X FM/CSA/IECEx GTXSM26N4 009480-322 M25 X FM/CSA/IECEx GTXSN26N5 009480-323 3/4 NPT X FM/CSA/IECEx GTXSM26N5 009480-324 M25 X FM/CSA/IECEx GTXSN26B5 009480-305 3/4 NPT X INMETRO GTXSM26B5 009480-306 M25 X INMETRO GTXSM26SK5 009480-866 M25 X KAZAKH GTXSN26R4 009480-905 3/4 NPT X RUSSIA GTXSM26R4 009480-906 M25 X RUSSIA GTXSN26R5 009480-907 3/4 NPT X RUSSIA GTXSM26R5 009480-908 M25 X RUSSIA GTXSN26Y4 009480-805 3/4 NPT X CHINA GTXSM26Y4 009480-806 M25 X CHINA Ship Weight: <1lb (<0.45kg) NOTE: Refer to the GT3000 Instruction Manual 95-8616 for details on performance approvals. GTX Toxic Gas Transmitter (for use with U9500) Model Number Part Number Threads IS Ex Proof Approvals GTXSN29N4 009480-325 3/4 NPT X FM/CSA/IECEx GTXSM29N4 009480-326 M25 X FM/CSA/IECEx GTXSN29N5 009480-327 3/4 NPT X FM/CSA/IECEx GTXSM29N5 009480-328 M25 X FM/CSA/IECEx GTXSN29B5 009480-307 3/4 NPT X INMETRO GTXSM29B5 009480-308 M25 X INMETRO Ship Weight: <1lb (<0.45kg) NOTE: Refer to the GT3000 Instruction Manual 95-8616 for details on performance approvals.
Det-Tronics Horns (non-addressable)

Class 1, Division 1 Part Number Description Ship Weight 000121-408 Sounder/Beacon Combo, E2X, 24 Vdc, 1/2” NPT, Lens Clear 10.3 lb (4.7 kg) 000122-135 Sounder, 24 Vdc, 110 dB @ 1M, ATEX Z1&2, 250mA, Blue Housing, 2-M20 10.3 lb (4.7 kg) 000122-186 Sounder, 24 Vdc, Red Housing, IP66 4XM20, 32 Tones, 104 dB(A) 10.3 lb (4.7 kg) 000122-240 Sounder, ATEX, IECEx, Tag, Red 2XM20, 3.3K EOL, Plug 10.3 lb (4.7 kg) 000122-241 Horn, 24 Vdc, 2XM20, Blk Body SS Bracket, UL, IECEx, ATEX 10.3 lb (4.7 kg) 000122-254 Sounder, 117 dB, C1D1, Red 24 Vdc, 1X1/2”NPT, 2XM20, ATEX, UL 10.3 lb (4.7 kg) 000122-144 Horn, 27 Tones, marine grade alloy, Up to 100+/-3 dB, UL Class 1, Division 1, Groups C & D, NEMA 4x, Volt age: 24 Vdc, Cable Entries: 1x3/4" NPT LHS, 1x3/4" NPT RHS, Duty Label: None, Tag Label: None, Other Features: None, Finish: Red Finish 12.3 lb (5.6 kg) 000122-098 Horn, Alloy, Up to 100+/-3dB, UL Class 1, Div 1, Groups C & D, NEMA 4x, 24VDC, 3/4" NPT bottom entry, No duty or tag label, Fitted with 10K EOL Resistor), Red finish 12.3 lb (5.6 kg) 000122-024 Horn, Explosion-Proof, Class 1, Division 1, 24 Vdc, 3/4" Entry, 100 dB @ 10 ft., UL, cUL, CSFM 10.3 lb (4.7 kg) 000122-036 Siren, Explosion-Proof, Class 1, Division 1, Groups B, C, & D, 4 Selectable Tones, 24 Vdc, 108 dB @ 10 ft., NEMA 4X, UL, cUL 23 (10.5 kg) Class 1, Division 2 Part Number Description Ship Weight 000122-079 Horn, up to 115 dB, UL Class 1 Division 2, Class 1 Zones 1 & 2, NEMA 4X & 6, GRP material, 24 Vdc, no labels, one (1) 1/2" NPT entry, no special features, red finish 13.2 lb (6 kg) 000122-074 Horn, up to 118dB(A), GRP, UL Class 1 Division 2, Class 1 Zones 1 & 2, Class II Div 2, Groups F & G, NEMA 4x & 6, Voltage: 12V-48V d.c, Labels: None, Entries: 2x1/2" NPT, Options: None, Color: Painted Red 13.2 lb (6 kg) 000122-099 Horn, up to 118dB, GRP material, Certified EExd IIC T5, ATEX approved Ex II 2GD, IP66 & 67, 24 Vdc, No labels, two M20 entries, Natural Black finish 13.2 lb (6 kg) 000122-031 Alarm Horn, Class 1, Division 2, Groups A, B, C, & D, 24 Vdc, 0-110 dB @ 10 ft., NEMA 4X, UL, ULC, CSFM (requires tone module) 6.1 lb (2.7 kg) 000122-052 Universal Tone Module, 32 switchable Tones, UL, ULC, CSA, CSFM 0.5 lb (.23 kg) 000106-108 End of Line (EOL) Resistor, for supervision of end devices, 10K Ohm <1 lb (<.45 kg) General Purpose Part Number Description Ship Weight 000122-039 Horn, 80 to 92 dB @ 10 ft, surface mount, diode polarized, UL Listed 1 lb (.45 kg) 000122-037 Indoor backbox, general purpose 0.5 lb (.23 kg) 000122-033 Horn, 24 Vdc, Non-Polarized, general purpose, Model 450 1.5 lb (.68 kg) 000122-034 Panel Mount Gasket Kit, 350/450 0.5 lb (.23 kg) 000122-035 Back Box for 450 Horn 1 lb (.45 kg) 000122-245 Sounder, IS, 105 dB, ATEX, FM, IP66 25mA, 16-28 Vdc, Red 1.5 lb (.68 kg) Accessories Part Number Description Ship Weight 000106-108 EOL Resistor, 10K Ohm <1 lb (<.45 kg)
Det-Tronics Laser, Laser Aimer Holder

Laser Aimer is for use with the Q1201A and Q1201C Laser Holder in sighting and testing the area of flame detection coverage. When used with its holder, the laser beam identifies the center and edges of the detector’s field of view (FOV). NEW! Green laser available, for greater visibility. Preferred for most applications. Includes battery. Q1201A Laser Aimer Holder (Manual: 95-8404) is for use with the Laser Aimer for sighting and testing area of flame detection coverage. Easily attaches to the front of Det-Tronics legacy model UV, single frequency IR and UVIR detectors for use during system startup, checkout, and re-alignments. Q1201C Laser Aimer Holder (Manual: 95-8596) is for use with X3301, X3302, X5200, X9800, X2200, and X3300 flame detectors. Designed to hold the Laser Aimer to show exact location of the center of the detector’s FOV. Two additional holding positions are available for locating the outside edges of the FOV at either 30 degrees off center (75 degrees total FOV) or at 45 degrees off center (90 degrees total FOV). While the Laser Aimer is being used to locate edges of the FOV it can be rotated 360 degrees to identify the entire area of flame detection coverage. Q1201C Accessory is used with the Q1201C to determine the top aim point of the flame detector when a 10 or 20 degree FOV sight limiter is to be installed. Laser, Laser Aimer Holder Model/Description Part Number For Use With Ship Weight Red Laser Aimer 006097-001 Q1201A, B, and C 1 lb (0.46 kg) Green Laser Aimer 006097-002 Q1201A, B, and C 1 lb (0.46 kg) Battery, 3V Lithium 102871-001 Laser Aimer <1 lb (<0.46 kg) Q1201A1001 006066-001 C7050, C7052, U7602, X7050 2 lb (0.95 kg) Q1201C1001 007255-001 All X-Series 2 lb (0.95 kg) Q1201 Accessory 012125-001 Q1201C1001 (Provides 10° & 20° field of view) 1 lb (0.46 kg)
Det-Tronics Manual Call Stations (non-addressable)

Class 1, Division 1 Part Number Description Ship Weight 000115-316 MCP, PB, 3XM20, Red, Duty 3.3K Series, 10K EOL 5.5 lb (2.5 kg) 000115-317 MCP, PB, 3XM20, Red, Duty 1.5K Series, 2.4K EOL 5.5 lb (2.5 kg) 000115-333 MCP, BG, ATEX, IECEx, Tag, Red 10K EOL, 1K Series, DP 5.5 lb (2.5 kg) 000115-195 Manual Pull Station, push button with lift flap (dual action), SPST contact, surface mount, alloy housing painted red, key for reset, 1/2” NPT bottom, includes "FIRE-PUSH BUTTON" label, Class 1, Division 1, Groups C-D, NEMA 4X, UL 5.5 lb (2.5 kg) 000115-003 Manual Pull station, Dual Action Lift and Pull Ring, 3/4" Entry, Class 1, Division 1, SPDT Contacts, Groups C & D, Aluminum material, UL, ULC, CSA, CSFM Listed, Red Finish 5.5 lb (2.5 kg) 000115-040 Manual Pull Station, pull ring with lift flap (dual action), SPDT contact, surface mount, Aluminum housing, two 3/4” NPT (F) entries, Class 1, Division 1, Groups B, C, & D, NEMA 4/7/9, ULC, Red Finish 5.5 lb (2.5 kg) 000115-010 Manual Pull Station, Single Action (Dual if used with Lift Flap), DPDT Contacts, Aluminum material, Class 1, Division 1, Groups B, C, & D, NEMA 4X, UL Listed, Red Finish, Model B-9 3.5 lb (1.6 kg) 000210-709 Lift Flap for B-9, "CO2 Release" label 0.5 lb (.23 kg) 000115-011 Lift Flap for B-9, "FIRE ALARM" label 0.5 lb (.23 kg) 000115-012 Lift Flap for B-9, "FIRE SYSTEM RELEASE" label 0.5 lb (.23 kg) 000115-027 Lift Flap for B-9, "FM-200 Release" label 0.5 lb (.23 kg) Class 1, Division 2 Part Number Description Ship Weight 000115-006 MCP Push Button, 24V, Red, IECEx Call Point 2.7 lb (1.3 kg) 000115-278 MCP, PB, Single Switch, Red, ATEX Call Point 2.7 lb (1.3 kg) 000115-279 MCP, PB, Single Switch, YEL, ATEX Call Point 2.7 lb (1.3 kg) 000115-053 Manual Pull Station, pushbutton type with lift flap (dual action), Class 1, Division 2, Groups A, B, C, & D, NEMA 4X, SPST contact, surface mount, GRP housing painted red, key for reset, two 1/2” NPT (F) entries, includes "FIRE ALARM" label and 10K EOL resistor, UL 2.7 lb (1.3 kg) 000115-054 Manual Call Station, break glass type, SPST contact, Class 1, Division 2, Groups A, B, C, & D, NEMA 4X, SPST contact, surface mount, GRP housing painted red, key for test, two 1/2” NPT (F) entries, includes "FIRE BREAK GLASS" label, no EOL resistor, UL 2.7 lb (1.3 kg) General Purpose Part Number Description Ship Weight 000515-012 Manual Pull Station, Dual Action w/ Labels, DPST Contacts, Red Finish, Model 3300 1.2 (.6 kg) 000115-051 Manual Pull Station, Dual Action w/ Labels, SPST Contacts, Red Finish, Model 3300 1.2 (.6 kg) 000515-013 Weatherproof Backbox for 3300 Pull Station 1 lb (.45 kg) 000515-014 Indoor Backbox for 3300 Pull Station 0.5 lb (.23 kg) Accessories Part Number Description Ship Weight 000115-028 Glass Breakrods for B-9 (10 Pk) 0.5 lb (.23 kg) 000515-015 Glass Breakrods for 3300 Pull Station (12 Pk) 0.5 lb (.23 kg) 000515-016 Spare Key for 3300 Pull Station 0.5 lb (.23 kg) 000106-108 EOL Resistor, 10K Ohm <1 lb (<.45 kg) 000115-334 Spare Break Glass, E2S 50=1 EA Pack of 50 2 lb (.9 kg)
Det-Tronics Model 505 Combustible Transmitter

(Includes junction box, sensor ordered separately) Model 505 Combustible Transmitter (Spec Sheet: 90-1114). Designed for use with CGS sensor, the 505 provides an analog signal output representing detected gas concentration. The 505 is always used with a gas controller. Compliance to ANSI/ISA-12.13.01-2000 performance standards when connected to a standalone gas controller Performance certified to ATEX EN60079-29-1 4-20 mA output Sensor sensitivity check function One person calibration Includes a variety of j-box options Model 505 Retrofit Kits are available to upgrade an existing K-Series or Model 500 transmitter to the Model 505 transmitter using existing junction boxes and field wiring. The kit consists of: A transmitter board A label with calibration instructions for the junction box cover Instruction manual Junction box not included. Model 505 Model Matrix MODEL DESCRIPTION 505 Catalytic Combustible Gas Transmitter TYPE MATERIAL A Aluminum S Stainless Steel TYPE CONDUIT ENTRIES AND ORIENTATION 2 2-ports, ST-straight-through configuration (180 degree orientation) 3 2-ports, L-configuration (90 degree orientation) 4 3-ports, T-configuration 5 5-ports TYPE THREAD TYPE A 3/4" NPT C M20/M25 TYPE OUTPUT 2 4-20 mA TYPE SIGNAL LOOP IMPEDANCE A 0-125 ohms (replaces K series) B 100-500 ohms (replaces Model 500) TYPE CLASSIFICATION 1 Explosion-proof TYPE APPROVALS W FM/CSA/ATEX/IECEx Model 505 Combustible Transmitter and Junction Box Model Part Number Replaces Material Conduit Entry* Ports† Ohm Output FM/CSA/ ATEX/ IECEx 505A2A2A1W 006748-001 226585-001, 226555-113 AL 3/4 NPT 2 (ST) 125 X 505A3A2A1W 006748-002 226585-001, 226555-101 AL 3/4 NPT 2 (L) 125 X 505A2C2A1W 006748-003 AL M20 2 (ST) 125 X 505A3C2A1W 006748-004 226585-001, 226555-107 AL M20/M25 2 (L) 125 X 505A2A2B1W 006748-005 226673-001, 226555-113 AL 3/4 NPT 2 (ST) 500 X 505A3A2B1W 006748-006 226673-001, 226555-101 AL 3/4 NPT 2 (L) 500 X 505A2C2B1W 006748-007 AL M20 2 (ST) 500 X 505A3C2B1W 006748-008 226673-001, 226555-107 AL M20/M25 2 (L) 500 X 505S3A2A1W 006748-009 226585-001, 226555-111 SS 3/4 NPT 2 (L) 125 X 505S3C2A1W 006748-010 226585-001, 226555-112 SS M20 2 (L) 125 X 505S3A2B1W 006748-011 226673-001, 226555-111 SS 3/4 NPT 2 (L) 500 X 505S3C2B1W 006748-012 226673-001, 226555-112 SS M20 2 (L) 500 X 505A4A2A1W 006748-013 AL 3/4 NPT 3 (T) 125 X 505A4C2A1W 006748-014 AL M20 3 (T) 125 X Ship Weight: Aluminum = 3.8 lb (1.7 kg) Stainless Steel = 8.7 lb (4 kg) *If 2 numbers are listed, the first number is sensor entry, and second number is for field cable entry(ies) †"L" designates 90 degree conduit entry orientation. "ST" designates straight-thru or 180 degree orientation Model 505 Spare Parts Part Number Description Output Load Ship Weight 006817-001 505 pc board 125 ohms 8 oz (0.23 kg) 006817-002 505 pc board 500 ohms 8 oz (0.23 kg) 102883-001 505 Sensor Wiring Terminal Block n/a 8 oz (0.23 kg) Model 505 Retrofit Kits Part Number Description Output Load 006818-001 K series-125 ohms 8 oz (0.23 kg) 006818-002 500 model-500 ohms 8 oz (0.23 kg)