+1 ( 281 ) 310 – 0628

Det-Tronics EQ2400PLR Physical Layer Repeater


Bulk Orders

Competitive Pricing
Short Lead Times
Consolidated Shipping
Prompt Response
Request a Quote

EQ2400PLR Physical Layer Repeater (spec sheet 90-XXXX) is a repeater module that is connected between two network segments. A network segment is defined as the segment between two network extenders or the segment between an EQP controller and a network extender. The purpose of the physical layer repeater is to eliminate communication interference resulting from network wiring opens caused by a break in the wire or a bad connection. An open wire will result in the reflection of the network signal back along the network wiring segment. This interference has the potential to cause a network device to fault isolate. This will occur at a device located at a certain distance from the network open. Typically the distance lies between 350 and 500 meters and is dependent upon the electrical characteristics of the network cable.

  • Suppresses reflection
  • Amplifies signal


EQ24XX PLR Physical Layer Repeater

Model Part Number Material Thread Ports FM/CSA/ATEX Ship Weight
EQ2453PLR 009183-001 AL 3/4 NPT 5 X 6 lb (2.7 kg)
EQ2457PLR 009183-002 AL M25/M20 6 X 6 lb (2.7 kg)
EQ2463PLR 009183-003 SS 3/4 NPT 5 X 10 lb (4.5 kg)
EQ2467PLR 009183-004 SS M25/M20 5 X 10 lb (4.5 kg)
EQ24EMPLR 009183-005 1 lb (0.46 kg)



There are no reviews yet.

Be the first to review “Det-Tronics EQ2400PLR Physical Layer Repeater”