Jet-Lube
Jet-Lube is a manufacturer of anti-seize compounds, thread sealants, thread compounds, greases and specialty lubricants.
Showing 1–45 of 543 results
-
#202 MOLY-LITH 400 lb Drum
$4,055.02JET-LUBE #202 MOLY-LITH has exceptional resistance to the effects of heat, water, weathering, oxidation and heavy loads. It contains rust, corrosion and oxidation inhibitors. #202 MOLY-LITH provides unexcelled protection wherever dirt, dust, high humidity, rain and adverse temperatures are problems; highly adhesive, pumpable and stable. BENEFITS: Has a dropping point of >390°F Excellent work stability under high loads, shock, and vibration Water resistant Fortified with rust and corrosion inhibitors High strength fluid film High lithium soap content >10% High moly content >8% Pumpable formula Temkin load – 60 lbs. Designed for: Excellent for rack/pinion grease cups, drive shaft idler arm and ball joints. Specifically formulated to protect your equipment from premature damages that can occur from dirt, dust, and sediments. The high soap content builds a shield between the bearing surfaces and the external elements. Contains micro-fine Molybdenum Disulfide (MoS2) particles to further enhance load carrying and low friction characteristics. Applications Automotive and industrial applications, including all grease fittings where semi-solid or plastic consistency grease is normally used. Reapplication according to owner’s manual to maintain excellent equipment functionality. Not Recommended for Oxygen Service Service Rating: 0°F to 300°F -18°C to 150°C -
02500 – DOPE BRUSH
JET-LUBE DOPE BRUSHES are engineered to hold up to the rough conditions where they are used and the materials that are being applied. Solid wood handles with rubber drip collars make for safe handling. BENEFITS: Tapered and Beveled ends Non-abrasive Thick handle 16" & 30" brush lengths Available in two styles, tapered and beveled. Note: Tapered brushes available with a 30 in. handle, without a hand guard. Applications Used to apply any bulk product. TDS -
03000 – DOPE BRUSH
JET-LUBE DOPE BRUSHES are engineered to hold up to the rough conditions where they are used and the materials that are being applied. Solid wood handles with rubber drip collars make for safe handling. BENEFITS: Tapered and Beveled ends Non-abrasive Thick handle 16" & 30" brush lengths Available in two styles, tapered and beveled. Note: Tapered brushes available with a 30 in. handle, without a hand guard. Applications Used to apply any bulk product. TDS -
03500 – DOPE BRUSH
JET-LUBE DOPE BRUSHES are engineered to hold up to the rough conditions where they are used and the materials that are being applied. Solid wood handles with rubber drip collars make for safe handling. BENEFITS: Tapered and Beveled ends Non-abrasive Thick handle 16 & 30 brush lengths Available in two styles, tapered and beveled. Note: Tapered brushes available with a 30 in. handle, without a hand guard. Applications Used to apply any bulk product. -
10002 – KOPR-KOTE®
$16.40Industrial Copper Anti-Seize & Thread Lubricant - NSF H2 KOPR-KOTE® 1/2 lb. Brushtop can of Jet-Lube is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. KOPR-KOTE® contains CZ-EX®, Jet-Lube's EP additive, providing protection unequalled by competitive brands. Ideal tubing connections - threaded. Benefits of using KOPR-KOTE (Industrial) Lowers friction Not affected by contraction, expansion, or vibration Reduces wrench torque Will not run, drip, or settle out Permits reuse of fittings; saves stud, bolt, and nut replacement Has controlled frictional characteristics so that the surfaces of the nut & bolt are torque to the designed K-Factor Assures full hydraulic efficiency Will not harden, evaporate, or settle out; and requires no thinning Retains equipment in serviceable condition Environmentally safe - free of sulfur, lead & other environmentally undesirable metals Assures protection against rust, oxidation & corrosion Water-resistant & excellent for rough-cut threads made of cast iron, steel, and most alloys Available in convenient aerosol form (Aerosol not NSF H2) Specifications Base Materials: Complex / Petroleum Friction / K-Factor: 0.15 Certifications: Not classified as a marine pollutant DOT Approval CA2004080025, NSF Registered H2 (No. 120923)*, Conforms to MIL-PRF-907F Conforms to RAYTHEON spec M8656839 Type II Service Rating: -65° to 1800°F, -54°C to 982°C TDS SDS -
10004 – KOPR-KOTE®
$24.80JET-LUBE KOPR-KOTE is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. KOPR-KOTE contains CZ-EX®: JET-LUBE's EP additive, providing protection unequalled by competitive brands. BENEFITS: Retains the equipment in serviceable condition Environmentally safe formula is free of sulfur, lead, and other environmentally undesirable metals Assures protection against rust, oxidation, and corrosion Will not harden, evaporate, or settle out; and requires no thinning Water resistant and excellent for rough-cut threads made of cast iron, steel, and most alloys Has controlled frictional characteristics so that the surfaces of the nut & bolt are torque to the designed K-Factor Assures full hydraulic efficiency by allowing the metal surfaces to slide over each other without metal-to-metal contact KOPR-KOTE provides a shield against metal-to-metal contact, preventing seizure and corrosion. It fills irregularities and imperfections and resists welding, hardening, or setting. KOPR-KOTE provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up, or wash off. Applications Specially formulated to prevent excessive over torque issues and has a very high static friction factor of 0.15, the unique blend of complex thickeners to help evenly distribute the copper flake onto the metal surfaces to eliminate metal to threaded metal contact. KOPR-KOTE is ideal for use on threaded connections, pump housings, flanges, studs, exhaust manifold bolts, compressor heads, autoclaves, lathe centers, etc. Not recommended for oxygen services or on aluminum coated parts or fasteners SDS TDS -
10012 – KOPR-KOTE®
$165.45Water Well Drill Rod Compound KOPR-KOTE® Pail 2 GAL of Jet-Lube is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE's water well solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. Benefits of using KOPR-KOTE (Water Well) High copper content 10% Non-corrosive Sticks to steel Extreme pressure additives Developed for water well drillers High temp >450°F (232°C) Specifications Base Materials: Aluminum Complex / Petroleum Certifications: NSF Registered H2 #120923 Service Rating: 0°F to 450°F, -18°C to 232°C TDS -
10015 – KOPR-KOTE®
$323.54This product has been replaced by 10115 – Jet-Lube Kopr-Kote 5 Gal. Pail Water Well Drill Rod Compound KOPR-KOTE® Pail 5 GAL of Jet-Lube is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE's water well solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. Benefits of using KOPR-KOTE (Water Well) High copper content 10% Non-corrosive Sticks to steel Extreme pressure additives Developed for water well drillers High temp >450°F (232°C) Specifications Base Materials: Aluminum Complex / Petroleum Certifications: NSF Registered H2 #120923 Service Rating: 0°F to 450°F, -18°C to 232°C TDS -
10023 – KOPR-KOTE®
$85.26This product has been replaced by 10123 Jet-Lube Kopr-Kote 1 Gal. Pail. Water Well Drill Rod Compound KOPR-KOTE® 1 GAL Pail of Jet-Lube is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE's water well solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. Benefits of using KOPR-KOTE (Water Well) High copper content 10% Non-corrosive Sticks to steel Extreme pressure additives Developed for water well drillers High temp >450°F (232°C) Specifications Base Materials: Aluminum Complex / Petroleum Certifications: NSF Registered H2 #120923 Service Rating: 0°F to 450°F, -18°C to 232°C TDS -
10041 – KOPR-KOTE®
$20.46Industrial Copper Anti-Seize & Thread Lubricant - NSF H2 KOPR-KOTE® 12 oz. Aerosol of Jet-Lube is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. KOPR-KOTE® contains CZ-EX®, Jet-Lube's EP additive, providing protection unequalled by competitive brands. Ideal tubing connections - threaded. Benefits of using KOPR-KOTE (Industrial) Lowers friction Not affected by contraction, expansion, or vibration Reduces wrench torque Will not run, drip, or settle out Permits reuse of fittings; saves stud, bolt, and nut replacement Has controlled frictional characteristics so that the surfaces of the nut & bolt are torque to the designed K-Factor Assures full hydraulic efficiency Will not harden, evaporate, or settle out; and requires no thinning Retains equipment in serviceable condition Environmentally safe - free of sulfur, lead & other environmentally undesirable metals Assures protection against rust, oxidation & corrosion Water-resistant & excellent for rough-cut threads made of cast iron, steel, and most alloys Available in convenient aerosol form (Aerosol not NSF H2) Specifications Base Materials: Complex / Petroleum Friction / K-Factor: 0.15 Certifications: Not classified as a marine pollutant DOT Approval CA2004080025, NSF Registered H2 (No. 120923)*, Conforms to MIL-PRF-907F Conforms to RAYTHEON spec M8656839 Type II Service Rating: -65° to 1800°F, -54°C to 982°C TDS SDS -
10055 – KOPR-KOTE®
$12.17Industrial Copper Anti-Seize & Thread Lubricant - NSF H2 KOPR-KOTE® 1/4 lb. Brushtop can of Jet-Lube is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. KOPR-KOTE provides a shield against metal-to-metal contact, preventing seizure and corrosion. It fills irregularities and imperfections and resists welding, hardening, or setting. KOPR-KOTE provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up, or wash off. Benefits Lowers friction Not affected by contraction, expansion, or vibration Reduces wrench torque Will not run, drip, or settle out Permits reuse of fittings; saves stud, bolt, and nut replacement Has controlled frictional characteristics so that the surfaces of the nut & bolt are torque to the designed K-Factor Contains no lead or zinc Available in convenient aerosol form (Aerosol not NSF H2) Specifications Base Materials: Complex / Petroleum Friction / K-Factor: 0.15 Certifications: Not classified as a marine pollutant DOT Approval CA2004080025, NSF Registered H2 (No. 120923)*, Conforms to MIL-PRF-907F Conforms to RAYTHEON spec M8656839 Type II Service Rating: -65° to 1800°F, -54°C to 982°C TDS SDS -
10061 – KOPR-KOTE®
$104.18KOPR-KOTE provides a shield against metal-to-metal contact, preventing seizure and corrosion. It fills irregularities and imperfections and resists welding, hardening, or setting. KOPR-KOTE provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up, or wash off. View all -
10091 – KOPR-KOTE®
$114.15Industrial Copper Anti-Seize & Thread Lubricant - NSF H2 KOPR-KOTE® 1 GAL. PAIL of Jet-Lube is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. KOPR-KOTE® contains CZ-EX®, Jet-Lube's EP additive, providing protection unequalled by competitive brands. Ideal tubing connections - threaded. Benefits of using KOPR-KOTE (Industrial) Lowers friction Not affected by contraction, expansion, or vibration Reduces wrench torque Will not run, drip, or settle out Permits reuse of fittings; saves stud, bolt, and nut replacement Has controlled frictional characteristics so that the surfaces of the nut & bolt are torque to the designed K-Factor Assures full hydraulic efficiency Will not harden, evaporate, or settle out; and requires no thinning Retains equipment in serviceable condition Environmentally safe - free of sulfur, lead & other environmentally undesirable metals Assures protection against rust, oxidation & corrosion Water-resistant & excellent for rough-cut threads made of cast iron, steel, and most alloys Available in convenient aerosol form (Aerosol not NSF H2) Specifications Base Materials: Complex / Petroleum Friction / K-Factor: 0.15 Certifications: Not classified as a marine pollutant DOT Approval CA2004080025, NSF Registered H2 (No. 120923)*, Conforms to MIL-PRF-907F Conforms to RAYTHEON spec M8656839 Type II Service Rating: -65° to 1800°F, -54°C to 982°C TDS SDS -
10092 – KOPR-KOTE®
$250.06Industrial Copper Anti-Seize & Thread Lubricant - NSF H2 KOPR-KOTE® 2.5 GAL Pail of Jet-Lube is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. KOPR-KOTE® contains CZ-EX®, Jet-Lube's EP additive, providing protection unequalled by competitive brands. Ideal tubing connections - threaded. Benefits of using KOPR-KOTE (Industrial) Lowers friction Not affected by contraction, expansion, or vibration Reduces wrench torque Will not run, drip, or settle out Permits reuse of fittings; saves stud, bolt, and nut replacement Has controlled frictional characteristics so that the surfaces of the nut & bolt are torque to the designed K-Factor Assures full hydraulic efficiency Will not harden, evaporate, or settle out; and requires no thinning Retains equipment in serviceable condition Environmentally safe - free of sulfur, lead & other environmentally undesirable metals Assures protection against rust, oxidation & corrosion Water-resistant & excellent for rough-cut threads made of cast iron, steel, and most alloys Available in convenient aerosol form (Aerosol not NSF H2) Specifications Base Materials: Complex / Petroleum Friction / K-Factor: 0.15 Certifications: Not classified as a marine pollutant DOT Approval CA2004080025, NSF Registered H2 (No. 120923)*, Conforms to MIL-PRF-907F Conforms to RAYTHEON spec M8656839 Type II Service Rating: -65° to 1800°F, -54°C to 982°C TDS SDS -
10093 – KOPR-KOTE®
$469.31Industrial Copper Anti-Seize & Thread Lubricant - NSF H2 KOPR-KOTE® 5 GAL Pail of Jet-Lube is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. KOPR-KOTE® contains CZ-EX®, Jet-Lube's EP additive, providing protection unequalled by competitive brands. Ideal tubing connections - threaded. Benefits of using KOPR-KOTE (Industrial) Lowers friction Not affected by contraction, expansion, or vibration Reduces wrench torque Will not run, drip, or settle out Permits reuse of fittings; saves stud, bolt, and nut replacement Has controlled frictional characteristics so that the surfaces of the nut & bolt are torque to the designed K-Factor Assures full hydraulic efficiency Will not harden, evaporate, or settle out; and requires no thinning Retains equipment in serviceable condition Environmentally safe - free of sulfur, lead & other environmentally undesirable metals Assures protection against rust, oxidation & corrosion Water-resistant & excellent for rough-cut threads made of cast iron, steel, and most alloys Available in convenient aerosol form (Aerosol not NSF H2) Specifications Base Materials: Complex / Petroleum Friction / K-Factor: 0.15 Certifications: Not classified as a marine pollutant DOT Approval CA2004080025, NSF Registered H2 (No. 120923)*, Conforms to MIL-PRF-907F Conforms to RAYTHEON spec M8656839 Type II Service Rating: -65° to 1800°F, -54°C to 982°C TDS SDS -
10113 – Jet-Lube Kopr-Kote 2.5 Gal. Pail
$254.79Oilfield Tool Joint & Drill Collar Compound Jet-Lube Kopr-Kote 2.5 Gal. Pail is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE oilfield’s solid package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. Benefits of using Jet-Lube 10113 Kopr-Kote Repeatable frictional characteristics High temp complex grease Resistance to make up downhole Not considered a marine pollutant Highly adhesive Specifications of 10113 Kopr-Kote Base Materials: Complex Soap / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G), 1.25 very severe service Certifications: NSF Registered H2, DOT approval CA2004080025, Conforms to API RP7G torque charts Service Rating: 0°F to 450°F, -18°C to 232°C TDS SDS PDS -
10115 – Jet-Lube Kopr-Kote 5 Gal. Pail
$400.46Oilfield Tool Joint & Drill Collar Compound KOPR - KOTE 5 Gal. Pail by Jet-Lube is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE oilfield’s solid package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. Benefits Repeatable frictional characteristics High temp complex grease Resistance to make up downhole Not considered a marine pollutant Highly adhesive Specifications Base Materials: Complex Soap / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G), 1.25 very severe service Certifications: Environmental Rating: UK CEFAS OCNS Group B, NSF Registered H2, DOT approval CA2004080025, Conforms to API RP7G torque charts Service Rating: 0°F to 450°F, -18°C to 232°C TDS SDS PDS -
10115L – KOPR-KOTE®
$405.88Oilfield Tool Joint & Drill Collar Compound Jet-Lube 10115L KOPR-KOTE® is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE oilfield’s solid package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. Benefits of using KOPR-KOTE Repeatable frictional characteristics High temp complex grease Resistance to make up downhole Not considered a marine pollutant Highly adhesive Specifications of 10115L KOPR-KOTE® Base Materials: Complex Soap / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G), 1.25 very severe service Certifications: NSF Registered H2, DOT approval CA2004080025, Conforms to API RP7G torque charts Service Rating: 0°F to 450°F, -18°C to 232°C TDS SDS PDS -
10123 Jet-Lube Kopr-Kote 1 Gal. Pail
$109.04Oilfield Tool Joint & Drill Collar Compound Jet-Lube Kopr-Kote 1 Gal. Pail is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE oilfield’s solid package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. Benefits of using Jet-Lube KOPR-KOTE Repeatable frictional characteristics High temp complex grease Resistance to make up downhole Not considered a marine pollutant Highly adhesive Specifications of 10123 Kopr-Kote Base Materials: Complex Soap / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G), 1.25 very severe service Certifications: NSF Registered H2, DOT approval CA2004080025, Conforms to API RP7G torque charts Service Rating: 0°F to 450°F, -18°C to 232°C -
10129 – KOPR-KOTE®
$4,267.32Oilfield Tool Joint & Drill Collar Compound Jet-Lube 10129 - KOPR-KOTE® is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE oilfield’s solid package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. Benefits of using KOPR-KOTE® Repeatable frictional characteristics High temp complex grease Resistance to make up downhole Not considered a marine pollutant Highly adhesive Specifications of 10129 KOPR-KOTE® Base Materials: Complex Soap / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G), 1.25 very severe service Certifications: NSF Registered H2, DOT approval CA2004080025, Conforms to API RP7G torque charts Service Rating: 0°F to 450°F, -18°C to 232°C TDS SDS PDS -
10212 – JET-LUBE KOPR-KOTE GEOTHERMAL 2 gal pail
Oilfield Tool Joint & Drill Collar Compound - Geothermal Formula JET-LUBE KOPR-KOTE GEOTHERMAL is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE's solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. Benefits of using KOPR-KOTE GEOTHERMAL Ideal where extreme high temps are encountered Contains no lead or zinc Extreme pressure additives provide additional protection against seizing, galling and allow consistent makeup Sticks to wet joints Unequaled resistance to makeup downhole Specifications of 10212 KOPR-KOTE GEOTHERMAL Friction / K-Factor: 1.15 Certifications: NFS Registered H2 #120923 TDS SDS -
10224 – JET-LUBE KOPR-KOTE GEOTHERMAL 15 gal pail
JET-LUBE KOPR-KOTE GEOTHERMAL is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE's solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. BENEFITS: Extreme High Temp -0°F to 700°F Friction Factor 1.15 Conforms to API-RP7G Non-Melt Formula Double Duty Drill Collar Compound NLGI 1 The highly refined, low pour point oil used in the production of our grease ensures brushability at low temperatures as well as the necessary oxidation and thermal stability at high temperatures. Aluminum based greases offer the additional advantage of superior adhesion to wet steel surfaces and resistance to water wash-off. Applications As stress levels rise above 50% of yield, the friction factor increases, limiting downhole makeup. Full hydraulic joint efficiency is maintained allowing joint shoulder faces to mate completely without standoff or deformation. For invert or high-pH muds, use Jet-Lube EXTREME™. For wedge-type thread connections, use NCS-30™ ECF for best thread-wear protection. Service Rating 0°F to 700°F -18°C to 370°C SDS TDS -
10229 – JET-LUBE KOPR-KOTE GEOTHERMAL 50 gal drum
JET-LUBE KOPR-KOTE GEOTHERMAL is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE's solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. BENEFITS: Extreme High Temp -0°F to 700°F Friction Factor 1.15 Conforms to API-RP7G Non-Melt Formula Double Duty Drill Collar Compound NLGI 1 The highly refined, low pour point oil used in the production of our grease ensures brushability at low temperatures as well as the necessary oxidation and thermal stability at high temperatures. Aluminum based greases offer the additional advantage of superior adhesion to wet steel surfaces and resistance to water wash-off. Applications As stress levels rise above 50% of yield, the friction factor increases, limiting downhole makeup. Full hydraulic joint efficiency is maintained allowing joint shoulder faces to mate completely without standoff or deformation. For invert or high-pH muds, use Jet-Lube EXTREME™. For wedge-type thread connections, use NCS-30™ ECF for best thread-wear protection. Service Rating 0°F to 700°F -18°C to 370°C SDS TDS -
10312 – JET-LUBE KOPR-KOTE ARCTIC 2 gal pail
Oilfield Tool Joint & Drill Collar Compound - Arctic Formula JET-LUBE KOPR-KOTE ARCTIC is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE ARCTIC uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE®. For severe cold drilling applications KOPR-KOTE ARCTIC utilizes very low pour-point naphthenic oil which greatly improves the applicability of the compounds to the connection while providing the same water resistance of standard KOPR-KOTE. Benefits of using JET-LUBE KOPR-KOTE ARCTIC Repeatable frictional characteristics Resistance to downhole make-up Highly adhesive Improved low temperature applicability Contains no lead or zinc Extreme pressure additives Sticks to wet joints Specifications of 10312 KOPR-KOTE ARCTIC Base Materials: Anhydrous Calcium / Petroleum Friction / K-Factor: 1.15 (drill strings) Relative to API RP 7G, 1.40 (relative to API-Mod) Relative to API RP 5A3 Certifications: Not classified as marine pollutant - DOT Approval CA2004080025 TDS SDS PDS -
10323 – JET-LUBE KOPR-KOTE ARCTIC 1 gal pail
Oilfield Tool Joint & Drill Collar Compound - Arctic Formula JET-LUBE KOPR-KOTE ARCTIC 1 gal pail is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE ARCTIC uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE®. For severe cold drilling applications KOPR-KOTE ARCTIC utilizes very low pour-point naphthenic oil which greatly improves the applicability of the compounds to the connection while providing the same water resistance of standard KOPR-KOTE. Benefits of using JET-LUBE KOPR-KOTE ARCTIC Repeatable frictional characteristics Resistance to downhole make-up Highly adhesive Improved low temperature applicability Contains no lead or zinc Extreme pressure additives Sticks to wet joints Specifications of 10323 KOPR-KOTE ARCTIC Base Materials: Anhydrous Calcium / Petroleum Friction / K-Factor: 1.15 (drill strings) Relative to API RP 7G, 1.40 (relative to API-Mod) Relative to API RP 5A3 Certifications: Not classified as marine pollutant - DOT Approval CA2004080025 TDS SDS PDS -
10324 – JET-LUBE KOPR-KOTE ARCTIC 15 gal pail
Oilfield Tool Joint & Drill Collar Compound - Arctic Formula JET-LUBE KOPR-KOTE ARCTIC 15 gal pail is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE ARCTIC uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE®. For severe cold drilling applications KOPR-KOTE ARCTIC utilizes very low pour-point naphthenic oil which greatly improves the applicability of the compounds to the connection while providing the same water resistance of standard KOPR-KOTE. Benefits of using JET-LUBE KOPR-KOTE ARCTIC Repeatable frictional characteristics Resistance to downhole make-up Highly adhesive Improved low temperature applicability Contains no lead or zinc Extreme pressure additives Sticks to wet joints Specifications of 10324 KOPR-KOTE ARCTIC Base Materials: Anhydrous Calcium / Petroleum Friction / K-Factor: 1.15 (drill strings) Relative to API RP 7G, 1.40 (relative to API-Mod) Relative to API RP 5A3 Certifications: Not classified as marine pollutant - DOT Approval CA2004080025 TDS SDS PDS -
10329 – JET-LUBE KOPR-KOTE ARCTIC 50 gal drum
Oilfield Tool Joint & Drill Collar Compound - Arctic Formula JET-LUBE KOPR-KOTE ARCTIC 50 gal drum is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE ARCTIC uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE®. For severe cold drilling applications KOPR-KOTE ARCTIC utilizes very low pour-point naphthenic oil which greatly improves the applicability of the compounds to the connection while providing the same water resistance of standard KOPR-KOTE. Benefits of using JET-LUBE KOPR-KOTE ARCTIC Repeatable frictional characteristics Resistance to downhole make-up Highly adhesive Improved low temperature applicability Contains no lead or zinc Extreme pressure additives Sticks to wet joints Specifications of 10329 KOPR-KOTE ARCTIC Base Materials: Anhydrous Calcium / Petroleum Friction / K-Factor: 1.15 (drill strings) Relative to API RP 7G, 1.40 (relative to API-Mod) Relative to API RP 5A3 Certifications: Not classified as marine pollutant - DOT Approval CA2004080025 TDS SDS PDS -
10512 – KOPR-KOTE® ARCTIC
$187.73Water Well Drill Rod Compound KOPR-KOTE® ARCTIC is the more pumpable or sprayable version of the standard grade KOPR-KOTE, our premier waterwell and HDD drilling compound in the market. JET-LUBE KOPR-KOTE® ARCTIC is an unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE® ARCTIC's solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. As stress levels rise above 50% of yield, the friction factor increases, limiting downhole makeup. Full hydraulic joint efficiency is maintained allowing joint shoulder faces to mate completely without standoff or deformation. This water well drill rod compound offers the best protection in the most severe drilling situations such as higher speeds, higher penetration rates, long horizontal holes or harder formations. Benefits of using KOPR-KOTE Arctic (Water Well) Designed to handle extremes in low temperature Contains no lead or zinc Spray and pump application Extreme-pressure additives Protects against rust & corrosion Sticks to wet joints Unequaled resistance to makeup down-hole Designed to handle extremes in low temperature Specifications Base Materials: Aluminum Complex / Petroleum Certifications: "Conforms to assembly bill 1953, Not classified as a marine pollutant - DOT Approval CA2004080025 Service Rating: -40°F to 300°, -40°C to 149°C View all -
10515 – KOPR-KOTE® ARCTIC
$442.40Water Well Drill Rod Compound KOPR-KOTE® ARCTIC is the more pumpable or sprayable version of the standard grade KOPR-KOTE, our premier waterwell and HDD drilling compound in the market. JET-LUBE KOPR-KOTE® ARCTIC is an unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE® ARCTIC's solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. As stress levels rise above 50% of yield, the friction factor increases, limiting downhole makeup. Full hydraulic joint efficiency is maintained allowing joint shoulder faces to mate completely without standoff or deformation. This water well drill rod compound offers the best protection in the most severe drilling situations such as higher speeds, higher penetration rates, long horizontal holes or harder formations. Benefits of using KOPR-KOTE Arctic (Water Well) Designed to handle extremes in low temperature Contains no lead or zinc Spray and pump application Extreme-pressure additives Protects against rust & corrosion Sticks to wet joints Unequaled resistance to makeup down-hole Designed to handle extremes in low temperature Specifications Base Materials: Aluminum Complex / Petroleum Certifications: "Conforms to assembly bill 1953, Not classified as a marine pollutant - DOT Approval CA2004080025 Service Rating: -40°F to 300°, -40°C to 149°C View all -
10523 – KOPR-KOTE® ARCTIC
$104.02Water Well Drill Rod Compound KOPR-KOTE® ARCTIC is the more pumpable or sprayable version of the standard grade KOPR-KOTE, our premier waterwell and HDD drilling compound in the market. JET-LUBE KOPR-KOTE® ARCTIC is an unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE® ARCTIC's solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. As stress levels rise above 50% of yield, the friction factor increases, limiting downhole makeup. Full hydraulic joint efficiency is maintained allowing joint shoulder faces to mate completely without standoff or deformation. This water well drill rod compound offers the best protection in the most severe drilling situations such as higher speeds, higher penetration rates, long horizontal holes or harder formations. Benefits of using KOPR-KOTE Arctic (Water Well) Designed to handle extremes in low temperature Contains no lead or zinc Spray and pump application Extreme-pressure additives Protects against rust & corrosion Sticks to wet joints Unequaled resistance to makeup down-hole Designed to handle extremes in low temperature Specifications Base Materials: Aluminum Complex / Petroleum Certifications: "Conforms to assembly bill 1953, Not classified as a marine pollutant - DOT Approval CA2004080025 Service Rating: -40°F to 300°, -40°C to 149°C View all -
10912 – 21®
$110.69Water Well Drill Rod Compound An excellent drill rod compound for water well and construction applications. 21® is formulated to provide a superior level of performance for the increasing demands of today’s water well and HDD drilling markets. The lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21 utilizes our EXTREME base grease which is resistant to invert or high-pH muds and provides better pipe storage properties. Benefits of using 21® (Water Well) Lead & zinc-free Rust & corrosion inhibitors Excellent resistance to make up downhole Sticks to wet joints Specifications: Base Materials: Complex Soap / Petroleum Certifications: Not classified as a marine pollutant -
10915 – 21®
$223.09Water Well Drill Rod Compound An excellent drill rod compound for water well and construction applications. 21® is formulated to provide a superior level of performance for the increasing demands of today’s water well and HDD drilling markets. The lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21 utilizes our EXTREME base grease which is resistant to invert or high-pH muds and provides better pipe storage properties. Benefits of using 21® (Water Well) Lead & zinc-free Rust & corrosion inhibitors Excellent resistance to make up downhole Sticks to wet joints Specifications: Base Materials: Complex Soap / Petroleum Certifications: Not classified as a marine pollutant TDS SDS -
10923 – 21®
$54.90Water Well Drill Rod Compound An excellent drill rod compound for water well and construction applications. 21® is formulated to provide a superior level of performance for the increasing demands of today’s water well and HDD drilling markets. The lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21 utilizes our EXTREME base grease which is resistant to invert or high-pH muds and provides better pipe storage properties. Benefits of using 21® (Water Well) Lead & zinc-free Rust & corrosion inhibitors Excellent resistance to make up downhole Sticks to wet joints Specifications: Base Materials: Complex Soap / Petroleum Certifications: Not classified as a marine pollutant TDS SDS -
10929 – 21®
$1,896.50Water Well Drill Rod Compound An excellent drill rod compound for water well and construction applications. 21® is formulated to provide a superior level of performance for the increasing demands of today’s water well and HDD drilling markets. The lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21 utilizes our EXTREME base grease which is resistant to invert or high-pH muds and provides better pipe storage properties. Benefits of using 21® (Water Well) Lead & zinc-free Rust & corrosion inhibitors Excellent resistance to make up downhole Sticks to wet joints Specifications: Base Materials: Complex Soap / Petroleum Certifications: Not classified as a marine pollutant -
11013 JET-LUBE 21 Joint/Drill Collar Compound 2.5 Gal
$192.41Oilfield Drill Collar & Tool Joint Compound 21 Joint/Drill Collar Compound is an environmentally-friendly, double duty drill collar and tool joint compound, formulated to provide a superior level of performance for the increasing demands of today’s oilfield market. 21®'s lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21 utilizes our EXTREME base grease which is resistant to invert or high-pH muds and provides better pipe storage properties. Specifications of JET-LUBE 21 Joint/Drill Collar Compound Base Materials: Complex / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G) Certifications: Not classified as a marine pollutant, Conforms to the API RP7G make-up charts Service Rating: 0°F to 450°F, -18°C to 232°C TDS -
11014 – 21®
Oilfield Drill Collar & Tool Joint Compound 21 Joint/Drill Collar Compound is an environmentally-friendly, double duty drill collar and tool joint compound, formulated to provide a superior level of performance for the increasing demands of today’s oilfield market. 21®'s lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21 utilizes our EXTREME base grease which is resistant to invert or high-pH muds and provides better pipe storage properties. Specifications of JET-LUBE 11014 21 Joint/Drill Collar Compound Base Materials: Complex / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G) Certifications: Not classified as a marine pollutant, Conforms to the API RP7G make-up charts Service Rating: 0°F to 450°F, -18°C to 232°C TDS -
11015 JET-LUBE 21 Joint/Drill Collar Compound 5 Gal
$344.29Oilfield Drill Collar & Tool Joint Compound Environmentally-friendly, double duty drill collar and tool joint compound, formulated to provide a superior level of performance for the increasing demands of today’s oilfield market. 21®'s lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21 utilizes our EXTREME base grease which is resistant to invert or high-pH muds and provides better pipe storage properties. Specifications: Base Materials: Complex / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G) Certifications: Not classified as a marine pollutant, Conforms to the API RP7G make-up charts Service Rating: 0°F to 450°F, -18°C to 232°C TDS -
11024 JET-LUBE 21 Joint/Drill Collar Compound 15 gal. drom
Oilfield Drill Collar & Tool Joint Compound JET-LUBE 21 Joint/Drill Collar Compound 5 Gal is an environmentally-friendly, double duty drill collar and tool joint compound, formulated to provide a superior level of performance for the increasing demands of today’s oilfield market. 21®'s lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21 utilizes our EXTREME base grease which is resistant to invert or high-pH muds and provides better pipe storage properties. Specifications of 11024 21 Joint/Drill Collar Compound Base Materials: Complex / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G) Certifications: Not classified as a marine pollutant, Conforms to the API RP7G make-up charts Service Rating: 0°F to 450°F, -18°C to 232°C TDS -
11029 – 21®
$2,365.25Oilfield Drill Collar & Tool Joint Compound JET-LUBE 21 Joint/Drill Collar Compound 5 Gal is an environmentally-friendly, double duty drill collar and tool joint compound, formulated to provide a superior level of performance for the increasing demands of today’s oilfield market. 21®'s lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21 utilizes our EXTREME base grease which is resistant to invert or high-pH muds and provides better pipe storage properties. Specifications of 11029 21 Joint/Drill Collar Compound Base Materials: Complex / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G) Certifications: Not classified as a marine pollutant, Conforms to the API RP7G make-up charts Service Rating: 0°F to 450°F, -18°C to 232°C TDS -
11093 – 21®
Oilfield Drill Collar & Tool Joint Compound JET-LUBE 21 Joint/Drill Collar Compound 5 Gal is an environmentally-friendly, double duty drill collar and tool joint compound, formulated to provide a superior level of performance for the increasing demands of today’s oilfield market. 21®'s lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21 utilizes our EXTREME base grease which is resistant to invert or high-pH muds and provides better pipe storage properties. Specifications of 11093 21 Joint/Drill Collar Compound Base Materials: Complex / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G) Certifications: Not classified as a marine pollutant, Conforms to the API RP7G make-up charts Service Rating: 0°F to 450°F, -18°C to 232°C TDS -
11215 JET-LUBE 21 – ARCTIC Double Duty Drill Collar & Tool Joint Compound 5 Gal Pail
$371.39Oilfield Drill Collar & Tool Joint Compound Jet-Lube ARCTIC Double Duty Drill Collar & Tool Joint Compound is a free of lead and zinc and formulated to provide a high level of performance for the increasing demands of today’s oilfield market. 21® Arctic's lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21's arctic grade is for improved low temperature applicability and spray systems. Benefits of using 21® Arctic (Oilfield) Pumpable & brushable Lead & zinc-free Rust & corrosion inhibitors Specifications of 11215 ARCTIC Double Duty Drill Collar & Tool Joint Compound Base Materials: Soap / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G) Certifications: Not classified as a marine pollutant - DOT Approval CA2006100003 TDS SDS -
11224 – JET-LUBE 21 – ARCTIC 15 gal. drom
$0.93JET-LUBE 21 - ARCTIC, double-duty drill collar and tool joint compound, is free of lead and zinc and is formulated to provide a high level of performance for the increasing demands of today’s oilfield market. The lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. BENEFITS: Low Temp Arctic base grease -65°F (-54°C) to 225°F (107°C) Pumpable & Brushable formula Friction factor: 1.15 Density: 9.0 NLGI Grade 1 No Lead No Zinc Consistent rig floor makeup Copper, Graphite formula JET-LUBE® 21® ARCTIC has been designed to utilize the makeup charts in API RP7G multiplied by the factor of 1.15. In the more severe drilling situations such as higher speeds, higher penetration rates, deviated holes, or harder formations, drill collars and other rotary shouldered connections should be made up at least 10% over the listed RP7G values. Applications JET-LUBE® 21® ARCTIC is recommended for the entire drill string in most drilling conditions. Typical applications would include high angle holes, problem holes, whip stocks, and horizontal drilling applications in moderate to low temperature regions. JET-LUBE® 21® ARCTIC prevents high stress in drill pipe connections which shortens their useful life. Service Rating -55°F to 300°F -47°C to 149°C SDS -
11229 – JET-LUBE 21 – ARCTIC 50 gal. drum
$2,489.98JET-LUBE 21 - ARCTIC, double-duty drill collar and tool joint compound, is free of lead and zinc and is formulated to provide a high level of performance for the increasing demands of today’s oilfield market. The lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. BENEFITS: Low Temp Arctic base grease -65°F (-54°C) to 225°F (107°C) Pumpable & Brushable formula Friction factor: 1.15 Density: 9.0 NLGI Grade 1 No Lead No Zinc Consistent rig floor makeup Copper, Graphite formula JET-LUBE® 21® ARCTIC has been designed to utilize the makeup charts in API RP7G multiplied by the factor of 1.15. In the more severe drilling situations such as higher speeds, higher penetration rates, deviated holes, or harder formations, drill collars and other rotary shouldered connections should be made up at least 10% over the listed RP7G values. Applications JET-LUBE® 21® ARCTIC is recommended for the entire drill string in most drilling conditions. Typical applications would include high angle holes, problem holes, whip stocks, and horizontal drilling applications in moderate to low temperature regions. JET-LUBE® 21® ARCTIC prevents high stress in drill pipe connections which shortens their useful life. Service Rating -55°F to 300°F -47°C to 149°C SDS -
11312 – 21® ARCTIC
$121.41Water Well Drill Rod Compound 21® Arctic 2 Gal. Pail Water Well low temp base grease is formulated to provide a superior level of performance for the increasing demands of today’s water well and HDD drilling markets. The lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and antiwear additives. This grease provides protection and prevention of excessive circumferential makeup in hostile drilling environments Benefits Excellent resistance to makeup downhole Contains no lead or zinc Sticks to wet joints Special base for brushability and stability over a wide temperature range Very good running capability Inhibitors protect against rust and corrosion Consistent rig floor makeup Specifications Base Materials: Soap / Petroleum Certifications: Not classified as a marine pollutant - DOT Approval CA2006100003 -
11323 – 21® ARCTIC
$58.40Water Well Drill Rod Compound 21® Arctic 1 Gal. Pail Water Well low temp base grease is formulated to provide a superior level of performance for the increasing demands of today’s water well and HDD drilling markets. The lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and antiwear additives. This grease provides protection and prevention of excessive circumferential makeup in hostile drilling environments Benefits of using 21® Arctic (Water Well) Excellent resistance to makeup downhole Contains no lead or zinc Sticks to wet joints Special base for brushability and stability over a wide temperature range Very good running capability Inhibitors protect against rust and corrosion Consistent rig floor makeup Specifications Base Materials: Soap / Petroleum Certifications: Not classified as a marine pollutant - DOT Approval CA2006100003