Des-Case
PE Energy is a trusted Des-Case distributor and Des-Case supplier in Houston, TX, offering genuine Des-Case products, Des-Case breathers, Des-Case desiccant breathers, Des-Case filtration systems, Des-Case contamination control products, Des-Case oil transfer containers, Des-Case condition monitoring, Des-Case visual oil analysis, Des-Case lubricant storage solutions, Des-Case connected breathers, Des-Case moisture control solutions, Des-Case oil sampling products, Des-Case filter housings, and Des-Case RMF systems for industrial lubrication management and equipment protection. As a leading Des-Case products distributor, we help customers source authentic Des-Case solutions for moisture control, particulate contamination prevention, lubricant protection, and equipment reliability with fast delivery, competitive pricing, and dependable availability.
Rebuildable steel or disposable: which Des-Case breather makes sense?
Disposable breathers are the low-cost entry point and are replaced as a unit; rebuildable steel breathers cost more up front but take replacement cartridges, which wins on total cost where breathers are changed often. PE Energy stocks 387 Des-Case line items: 71 disposable desiccant breathers and 40 rebuildable steel breather units such as the DC-R6025SBS, alongside the rebuild kits that keep them in service.
What does Des-Case offer beyond breathers?
Contamination control does not stop at the breather port. The catalog carries 51 breather adapters and mounting hardware items, 15 oil level gauge indicators for visual checks, and 12 hydraulic off-line filtration units like the OLU1A30HB001000 for polishing a reservoir without taking the machine down. That mix lets a reliability team standardize storage, transfer and monitoring on one brand.
Showing 1–45 of 401 results
-
Des-Case 16″ Extended Spout 1″ Tip
$33.6016" Extended Spout 1" tip NOTE: All Spouts Come with Black Contamination Control Caps Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer. With non-desiccant and desiccant breather options available, as well as quick connects for clean filling, these transfer containers isolate oil from the environment providing the ultimate in best practice contamination control. Features Performance For keeping oil clean and dry during storage and transfer to machinery within ambient temperature ranges of -40ºF to 176ºF (-40°C to 80°C). Materials & Components Dispensing Lid and Spouts: – Nylon – 304 Stainless Steel – Steel – Buna-N – HDPE & PTFE Pump Lid, with Pump 304 Stainless Steel Steel Fluoro-silicone Silicone – Nylon PVC Polyurethane Aluminum HDPE Container HDPE Applications Transferring small volumes of oil Topping off reservoirs Small volume storage How it Works Oil Transfer Containers are the perfect solution for small volume transfers of oil to machines. Industrial-grade HDPE containers will not chemically react with oil or additive packages. The trigger mechanism in the dispensing lid keeps fluid isolated until engaged, controlling moisture and contamination. Optional non-desiccant or desiccant breathers keep oil clean and dry while in the container. An optional ISO B quick connect allows new, pre-filtered oil to be added to the container without exposing it to the atmosphere. The interchangeable spouts allow more flexibility with the standard dispensing lid and eliminate the need for funnels. They are available in different lengths, tip sizes, colors, and either rigid or extended options. Additional accessories like the pump lid, pump, and color-coding label system allow for even more control of your lubricant storage and handling. Using the Oil Transfer Container and its best practices options ensures the oil transferred to your equipment is free of contamination. TDS -
Des-Case 16″ Extended Spout 1/4″ Tip
$33.6016" Extended Spout 1/4" tip NOTE: All Spouts Come with Black Contamination Control Caps Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer. With non-desiccant and desiccant breather options available, as well as quick connects for clean filling, these transfer containers isolate oil from the environment providing the ultimate in best practice contamination control. Features Performance For keeping oil clean and dry during storage and transfer to machinery within ambient temperature ranges of -40ºF to 176ºF (-40°C to 80°C). Materials & Components Dispensing Lid and Spouts: – Nylon – 304 Stainless Steel – Steel – Buna-N – HDPE & PTFE Pump Lid, with Pump 304 Stainless Steel Steel Fluoro-silicone Silicone – Nylon PVC Polyurethane Aluminum HDPE Container HDPE Applications Transferring small volumes of oil Topping off reservoirs Small volume storage How it Works Oil Transfer Containers are the perfect solution for small volume transfers of oil to machines. Industrial-grade HDPE containers will not chemically react with oil or additive packages. The trigger mechanism in the dispensing lid keeps fluid isolated until engaged, controlling moisture and contamination. Optional non-desiccant or desiccant breathers keep oil clean and dry while in the container. An optional ISO B quick connect allows new, pre-filtered oil to be added to the container without exposing it to the atmosphere. The interchangeable spouts allow more flexibility with the standard dispensing lid and eliminate the need for funnels. They are available in different lengths, tip sizes, colors, and either rigid or extended options. Additional accessories like the pump lid, pump, and color-coding label system allow for even more control of your lubricant storage and handling. Using the Oil Transfer Container and its best practices options ensures the oil transferred to your equipment is free of contamination. TDS -
Des-Case 22 Micron Large Spin-On Filter Element
$199.23What is the 22 Micron Large Spin-On Filter Element?Large spin-on microglass filter element, 22 micron, Beta 1000, for filter carts, drum filter carts, panel and compact panel units, LT-LMS and mobile utility carts. Sold in cases of six.What is on this listing?22 Micron, case of 6. Each is a separate part number in the 2026 price book, quoted and supplied by PE Energy.[PROOF: field observation or a customer application for this part, to be added by PE Energy] -
Des-Case 30G Series Cartridge Filter Element
Price range: $160.42 through $175.00These elements provide high-efficiency filtration with low pressure drop. With a high dirt-holding capacity, they are ideal for large applications and highly contaminated lubricants. 30G1B - Single piece, microglass 1 Micron ß4 (c) > 1000 Buna-N seals 30G1V - Single piece, microglass 1 Micron ß4 (c) > 1000 FPM seals (Viton) 30G3B - Single piece, microglass 3 Micron ß5 (c) > 1000 Buna-N seals 30G3V - Single piece, microglass 3 Micron ß5 (c) > 1000 FPM seals (Viton)30G6V - Single piece, microglass 6 Micron ß7 (c) > 1000 FPM seals (Viton)30G10V - Single piece, microglass 10 Micron ß10 (c) > 1000 FPM seals (Viton)30A5V - Single piece, microglass and water absorbing Polymer 5 Micron; ß5(c) > 200 TDS -
Des-Case 5″ Rigid Spout with 1″ Tip
$7.885" Rigid Spout with 1" tip NOTE: All Spouts Come with Black Contamination Control Caps Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer. With non-desiccant and desiccant breather options available, as well as quick connects for clean filling, these transfer containers isolate oil from the environment providing the ultimate in best practice contamination control. FeaturesPerformance For keeping oil clean and dry during storage and transfer to machinery within ambient temperature ranges of -40ºF to 176ºF (-40°C to 80°C). Materials & Components Dispensing Lid and Spouts: – Nylon – 304 Stainless Steel – Steel – Buna-N – HDPE & PTFE Pump Lid, with Pump 304 Stainless Steel Steel Fluoro-silicone Silicone – Nylon PVC Polyurethane Aluminum HDPE Container HDPE Applications Transferring small volumes of oil Topping off reservoirs Small volume storage How it Works Oil Transfer Containers are the perfect solution for small volume transfers of oil to machines. Industrial-grade HDPE containers will not chemically react with oil or additive packages. The trigger mechanism in the dispensing lid keeps fluid isolated until engaged, controlling moisture and contamination. Optional non-desiccant or desiccant breathers keep oil clean and dry while in the container. An optional ISO B quick connect allows new, pre-filtered oil to be added to the container without exposing it to the atmosphere. The interchangeable spouts allow more flexibility with the standard dispensing lid and eliminate the need for funnels. They are available in different lengths, tip sizes, colors, and either rigid or extended options. Additional accessories like the pump lid, pump, and color-coding label system allow for even more control of your lubricant storage and handling. Using the Oil Transfer Container and its best practices options ensures the oil transferred to your equipment is free of contamination. TDS -
Des-Case 60G Series Cartridge Filter Element
Price range: $314.35 through $324.06These elements provide high-efficiency filtration with low pressure drop. With a high dirt-holding capacity, they are ideal for large applications and highly contaminated lubricants. 60G1B - Single piece, microglass 1 Micron ß4 (c) > 1000 Buna-N seals 60G1V - Single piece, microglass 1 Micron ß4 (c) > 1000 FPM seals (Viton) 60G3B - Single piece, microglass 3 Micron ß5 (c) > 1000 Buna-N seals 60G3V - Single piece, microglass 3 Micron ß5 (c) > 1000 FPM seals (Viton) 60G6V - Single piece, microglass 6 Micron ß7 (c) > 1000 FPM seals (Viton) 60G10V - Single piece, microglass 10 Micron ß10 (c) > 1000 FPM seals (Viton) 60A1V - Single piece, microglass and water absorbing Polymer 1 Micron; ß1(c) > 200 60A5V - Single piece, microglass and water absorbing Polymer 5 Micron; ß5(c) > 200 TDS -
Des-Case 6×18 Cartridge Filter Element
$403.56These elements provide high-efficiency filtration with low pressure drop. With a high dirt-holding capacity, they are ideal for large applications and highly contaminated lubricants. TDS -
Des-Case 6×36 Cartridge Filter Element
$877.18What is the 6x36 Cartridge Filter Element?Cartridge microglass and water adsorbing filter elements for the TC-Series and the Giant Off-Line Unit, sold individually. This is the 6x36 body; the same element is also made in 6x18.What is on this listing?2.5 Micron, 5 Micron, 7 Micron, 12 Micron, 22 Micron, Water Removal. Each is a separate part number in the 2026 price book, quoted and supplied by PE Energy.[PROOF: field observation or a customer application for this part, to be added by PE Energy] -
Des-Case 8″ Rigid Spout 1″ Tip
$11.038" Rigid Spout 1" tip NOTE: All Spouts Come with Black Contamination Control Caps Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer. With non-desiccant and desiccant breather options available, as well as quick connects for clean filling, these transfer containers isolate oil from the environment providing the ultimate in best practice contamination control. Features Performance For keeping oil clean and dry during storage and transfer to machinery within ambient temperature ranges of -40ºF to 176ºF (-40°C to 80°C). Materials & Components Dispensing Lid and Spouts: – Nylon – 304 Stainless Steel – Steel – Buna-N – HDPE & PTFE Pump Lid, with Pump 304 Stainless Steel Steel Fluoro-silicone Silicone – Nylon PVC Polyurethane Aluminum HDPE Container HDPE Applications Transferring small volumes of oil Topping off reservoirs Small volume storage How it Works Oil Transfer Containers are the perfect solution for small volume transfers of oil to machines. Industrial-grade HDPE containers will not chemically react with oil or additive packages. The trigger mechanism in the dispensing lid keeps fluid isolated until engaged, controlling moisture and contamination. Optional non-desiccant or desiccant breathers keep oil clean and dry while in the container. An optional ISO B quick connect allows new, pre-filtered oil to be added to the container without exposing it to the atmosphere. The interchangeable spouts allow more flexibility with the standard dispensing lid and eliminate the need for funnels. They are available in different lengths, tip sizes, colors, and either rigid or extended options. Additional accessories like the pump lid, pump, and color-coding label system allow for even more control of your lubricant storage and handling. Using the Oil Transfer Container and its best practices options ensures the oil transferred to your equipment is free of contamination. TDS -
Des-Case 8″ Rigid Spout 1/2″ Tip
$10.508" Rigid Spout 1/4" tip NOTE: All Spouts Come with Black Contamination Control Caps Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer. With non-desiccant and desiccant breather options available, as well as quick connects for clean filling, these transfer containers isolate oil from the environment providing the ultimate in best practice contamination control. Features Performance For keeping oil clean and dry during storage and transfer to machinery within ambient temperature ranges of -40ºF to 176ºF (-40°C to 80°C). Materials & Components Dispensing Lid and Spouts: – Nylon – 304 Stainless Steel – Steel – Buna-N – HDPE & PTFE Pump Lid, with Pump 304 Stainless Steel Steel Fluoro-silicone Silicone – Nylon PVC Polyurethane Aluminum HDPE Container HDPE Applications Transferring small volumes of oil Topping off reservoirs Small volume storage How it Works Oil Transfer Containers are the perfect solution for small volume transfers of oil to machines. Industrial-grade HDPE containers will not chemically react with oil or additive packages. The trigger mechanism in the dispensing lid keeps fluid isolated until engaged, controlling moisture and contamination. Optional non-desiccant or desiccant breathers keep oil clean and dry while in the container. An optional ISO B quick connect allows new, pre-filtered oil to be added to the container without exposing it to the atmosphere. The interchangeable spouts allow more flexibility with the standard dispensing lid and eliminate the need for funnels. They are available in different lengths, tip sizes, colors, and either rigid or extended options. Additional accessories like the pump lid, pump, and color-coding label system allow for even more control of your lubricant storage and handling. Using the Oil Transfer Container and its best practices options ensures the oil transferred to your equipment is free of contamination. TDS -
Des-Case 8″ Rigid Spout 1/4″ tip
$11.038" Rigid Spout 1/4" tip NOTE: All Spouts Come with Black Contamination Control Caps Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer. With non-desiccant and desiccant breather options available, as well as quick connects for clean filling, these transfer containers isolate oil from the environment providing the ultimate in best practice contamination control. FeaturesPerformance For keeping oil clean and dry during storage and transfer to machinery within ambient temperature ranges of -40ºF to 176ºF (-40°C to 80°C). Materials & Components Dispensing Lid and Spouts: – Nylon – 304 Stainless Steel – Steel – Buna-N – HDPE & PTFE Pump Lid, with Pump 304 Stainless Steel Steel Fluoro-silicone Silicone – Nylon PVC Polyurethane Aluminum HDPE Container HDPE Applications Transferring small volumes of oil Topping off reservoirs Small volume storage How it Works Oil Transfer Containers are the perfect solution for small volume transfers of oil to machines. Industrial-grade HDPE containers will not chemically react with oil or additive packages. The trigger mechanism in the dispensing lid keeps fluid isolated until engaged, controlling moisture and contamination. Optional non-desiccant or desiccant breathers keep oil clean and dry while in the container. An optional ISO B quick connect allows new, pre-filtered oil to be added to the container without exposing it to the atmosphere. The interchangeable spouts allow more flexibility with the standard dispensing lid and eliminate the need for funnels. They are available in different lengths, tip sizes, colors, and either rigid or extended options. Additional accessories like the pump lid, pump, and color-coding label system allow for even more control of your lubricant storage and handling. Using the Oil Transfer Container and its best practices options ensures the oil transferred to your equipment is free of contamination. TDS -
Des-Case ACL93R Desiccant Breather
$116.24Refillable breather comes standard with ZR gel. Breathers with spring loaded check valves end in "V" Dimension/ Measurements: 5.91" x 3.78" ±150 x 96 mm Connection: 3/4" BSP Female Micron Rating: 3 micron -
Des-Case ACL96R Desiccant Breather
$132.63Refillable breather comes standard with ZR gel. Breathers with spring loaded check valves end in "V" Dimension/ Measurements: 8.27" x 3.78" ±210 x 96 mm Connection: 3/4" BSP Female Micron Rating: 3 micron -
Des-Case ACL96RV Desiccant Breather
$150.50Refillable breather comes standard with ZR gel. Breathers with spring loaded check valves end in "V" Dimension/ Measurements: 8.27" x 3.78" ±210 x 96 mm Connection: 3/4" BSP Female Micron Rating: 3 micron -
Des-Case ACM61R Desiccant Breather
$77.74ACM Series Breathers The RMF Systems ACM breathers are suitable for mobile and industrial applications because of their lightweight, rugged body. This series is fully serviceable and has optional check valves that prevent premature saturation of the silica gel and extend breather life. The spin on filter cap also provides a high dirt holding capacity. Applications Hydraulics Mobile & off-road equipment Truck differentials Nautical applications Features  By the Numbers 1. Spin-On Filter CapA spin-on filter cap provides increased dirt holding capacity and removes airborne contamination to 3-micron absolute. 2. Foam PadFoam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. 3. External RibsExternal ribs on shell to create greater durability and grip when installing or replacing breather. 4. Optional Check ValvesHigh quality check valves that won’t clog or stick are located underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions prolonging breather life and protecting system integrity. 5. Threaded MountingInternal threads provide durability and stability and can be used with an adapter. Specifications Model: 61 Series¹Part Number: ACM61R, ACM61RVFilter Efficiency: 3μ absolute (β3≥200)Amount of ZR Gel: 0.2 lbs (80 g)Adsorption Capacity: 0.9 fl oz (29 ml)Max. Flow Rate: N/ATemperature Range: -40°F to 194°F (-40°C to 90°C)Airflow without Check Valves: 9 cfm (260 l/min)Airflow with Check Valves: 2 cfm (50 l/min)KL Spin-On: KL60 (9237734)ZR Gel Refill: 100 cc / RF-100 (9253184)Spare Kit: RK-61 (9253193) ¹Note: The ACM part code ACM61R now reflects the ACM without check valves. We added the ACM61RV part code to represent the ACM with check valves.  TDS -
Des-Case ACM61RV Breather
$142.88What is the ACM61RV Breather?The RMF Systems ACM breathers are suitable for mobile and industrial applications because of their lightweight, rugged body. This series is fully serviceable and has optional check valves that prevent premature saturation of the silica gel and extend breather life. The spin on filter cap also provides a high dirt holding capacity.What is on this listing?ACM61RV, spring loaded check valve. Each is a separate part number in the 2026 Des-Case price book, quoted and supplied by PE Energy.[PROOF: field observation, install or a customer application for this product, to be added by PE Energy] -
Des-Case Axial Depth Filter Element
Price range: $132.16 through $162.54Elements for TC-Series, POD Systems and Mobile Equipment Kits DC-D10000C10004B - Depth Filter Element—4 part size 1000 DC-D10000C10006B - Depth Filter Element—6 part size 1000 DC-D10000C10008B - Depth Filter Element—8 part size 1000 TDS -
Des-Case Bottle Sampling Units
Price range: $5,510.94 through $11,580.14What is the Bottle Sampling Units?Fluid analysis is a crucial component of any oil management program. Early detection of potential problems can prevent costly repairs and downtime. The Portable Laser Particle Counter makes it possible to detect the ISO Cleanliness levels of the hydraulic media. The Portable Laser Particle Counter is available in different versions.Which part number do I order?These are the sampling units built for the portable laser particle counter line; the counter itself is a separate part.What is on this listing?BSU110PLPCM, BSU500V00US, BSU500V00AU/CN, BSU500E0SUS, BSU500E0SAU/CN. Each is a separate part number in the 2026 Des-Case price book, quoted and supplied by PE Energy.[PROOF: field observation, install or a customer application for this product, to be added by PE Energy] -
Des-Case BPU1A30HB000 Bypass Unit
$1,219.90By-Pass Unit, single housing, incl.1 cellulose element 30HB, flow control valve, visual indicator and single-stage (parallel) filtration The RMF Bypass Units are especially designed for mobile application in hydraulic and/or transmission systems. Specifications Nominal Flow 2,1 l/min Standard Max. Oil Temperature¹ 80°C Max. pressure filter housing 20 bar Inlet connection 1⁄4’’ BSP female Outlet connection 1⁄2’’ BSP female Operating pressure flow control valve (min – max) 12 – 420 bar Suitable elements 30HB, 30HV, 30NB, 30NV,30G1B, 30G1V,30G3B, 30G3V,30G6B, 30G6V, 30G12B, 30G12V30A5V By-pass openings pressure 6,2 bar (at 0 bar back pressure) Max. tank volume ± 750 l Fluid compatibility² Hydraulic fluids according to ISO 2943 Approximate weight 6 kg ¹ For other oil temperatures, please contact Des-Case² For other fluids, please contact Des-CaseFeaturesHow it works The Bypass filter comes equipped with an integrated pressure compensated flow control valve. This valve bleeds oil from the main hydraulic system, passes this through the filter after which it is returned to the hydraulic reservoir. The amount of oil extracted from the main system at any time is insignificant ensuring that it will not affect the working of the main system. Most commonly used biodegradable oils in the mobile sector are suitable for filtration with RMF filter elements. Applications RMF Bypass filter units can be fitted to every imaginable mobile application where hydraulic and/or transmission systems are present. Installation is very simple, the filter housing provides mounting slots on all four sides and the pressure and return connections are available on the side and the back of the Bypass unit. In recent years RMF Systems have developed a great deal of experience in cleaning and keeping clean hydraulic and transmission systems on: excavators wheel loaders forestry machines asphalt machines concrete pumps aviation ground support equipment agricultural machines Advantages Extremely clean oil due to high filtration efficiency Prevention of channel forming by radial filtration direction Large dirt and water holding capacity Compact and easy-maintenance design Environmentally friendly elements available Longer usage life for oil and components Reduces cost of ownership TDS -
Des-Case BPU1B60HB000 Bypass Unit
$1,707.87By-Pass Unit, single housing, double length incl. 1 cellulose 60HB, flow control valve, visual indicator and single-stage (parallel) filtration The RMF Bypass Units are especially designed for mobile application in hydraulic and/or transmission systems. Specifications Nominal Flow 2,1 l/min Standard Max. Oil Temperature¹ 80°C Max. pressure filter housing 20 bar Inlet connection 1⁄4’’ BSP female Outlet connection 1⁄2’’ BSP female Operating pressure flow control valve (min – max) 12 – 420 bar Suitable elements 30HB, 30HV, 30NB, 30NV,30G1B, 30G1V,30G3B, 30G3V,30G6B, 30G6V, 30G12B, 30G12V30A5V By-pass openings pressure 6,2 bar (at 0 bar back pressure) Max. tank volume ± 750 l Fluid compatibility² Hydraulic fluids according to ISO 2943 Approximate weight 6 kg ¹ For other oil temperatures, please contact Des-Case² For other fluids, please contact Des-CaseFeaturesHow it works The Bypass filter comes equipped with an integrated pressure compensated flow control valve. This valve bleeds oil from the main hydraulic system, passes this through the filter after which it is returned to the hydraulic reservoir. The amount of oil extracted from the main system at any time is insignificant ensuring that it will not affect the working of the main system. Most commonly used biodegradable oils in the mobile sector are suitable for filtration with RMF filter elements. Applications RMF Bypass filter units can be fitted to every imaginable mobile application where hydraulic and/or transmission systems are present. Installation is very simple, the filter housing provides mounting slots on all four sides and the pressure and return connections are available on the side and the back of the Bypass unit. In recent years RMF Systems have developed a great deal of experience in cleaning and keeping clean hydraulic and transmission systems on: excavators wheel loaders forestry machines asphalt machines concrete pumps aviation ground support equipment agricultural machines Advantages Extremely clean oil due to high filtration efficiency Prevention of channel forming by radial filtration direction Large dirt and water holding capacity Compact and easy-maintenance design Environmentally friendly elements available Longer usage life for oil and components Reduces cost of ownership TDS -
Des-Case BPU2A30HB000 Bypass Unit
$2,103.06By-Pass Unit, double housing, single length incl.2 cellulose elements 30HB, flow control valve, visual indicator and single-stage (parallel) filtration The RMF Bypass Units are especially designed for mobile application in hydraulic and/or transmission systems. Specifications Nominal Flow 4,2 l/min Standard Max. Oil Temperature¹ 80°C Max. pressure filter housing 20 bar Inlet connection 1⁄4’’ BSP female Outlet connection 1⁄2’’ BSP female Operating pressure flow control valve (min – max) 12 – 420 bar Suitable elements 60HB, 60HV, 60NB, 60NV,60G1B, 60G1V, 60G3B, 60G3V,60G6B, 60G6V, 60G12B, 60G12V60A5V By-pass openings pressure 6,2 bar (at 0 bar back pressure) Max. tank volume ± 1500 l Fluid compatibility² Hydraulic fluids according to ISO 2943 Approximate weight 10 kg ¹ For other oil temperatures, please contact Des-Case² For other fluids, please contact Des-CaseFeaturesHow it works The Bypass filter comes equipped with an integrated pressure compensated flow control valve. This valve bleeds oil from the main hydraulic system, passes this through the filter after which it is returned to the hydraulic reservoir. The amount of oil extracted from the main system at any time is insignificant ensuring that it will not affect the working of the main system. Most commonly used biodegradable oils in the mobile sector are suitable for filtration with RMF filter elements. Applications RMF Bypass filter units can be fitted to every imaginable mobile application where hydraulic and/or transmission systems are present. Installation is very simple, the filter housing provides mounting slots on all four sides and the pressure and return connections are available on the side and the back of the Bypass unit. In recent years RMF Systems have developed a great deal of experience in cleaning and keeping clean hydraulic and transmission systems on: excavators wheel loaders forestry machines asphalt machines concrete pumps aviation ground support equipment agricultural machines Advantages Extremely clean oil due to high filtration efficiency Prevention of channel forming by radial filtration direction Large dirt and water holding capacity Compact and easy-maintenance design Environmentally friendly elements available Longer usage life for oil and components Reduces cost of ownership TDS -
Des-Case BPU2B60HB000 Bypass Unit
$3,118.49By-Pass Unit, double housing, double length incl.2 cellulose elements 60HB, flow control valve, visual indicator and single-stage (parallel) filtration The RMF Bypass Units are especially designed for mobile application in hydraulic and/or transmission systems. Specifications Nominal Flow 4,2 l/min Standard Max. Oil Temperature¹ 80°C Max. pressure filter housing 20 bar Inlet connection 1⁄4’’ BSP female Outlet connection 1⁄2’’ BSP female Operating pressure flow control valve (min – max) 12 – 420 bar Suitable elements 60HB, 60HV, 60NB, 60NV, 60G1B, 60G1V, 60G3B, 60G3V, 60G6B, 60G6V, 60G12B, 60G12V 60A5V By-pass openings pressure 6,2 bar (at 0 bar back pressure) Max. tank volume ± 1500 l Fluid compatibility² Hydraulic fluids according to ISO 2943 Approximate weight 10 kg ¹ For other oil temperatures, please contact Des-Case ² For other fluids, please contact Des-Case Features How it works The Bypass filter comes equipped with an integrated pressure compensated flow control valve. This valve bleeds oil from the main hydraulic system, passes this through the filter after which it is returned to the hydraulic reservoir. The amount of oil extracted from the main system at any time is insignificant ensuring that it will not affect the working of the main system. Most commonly used biodegradable oils in the mobile sector are suitable for filtration with RMF filter elements. Applications RMF Bypass filter units can be fitted to every imaginable mobile application where hydraulic and/or transmission systems are present. Installation is very simple, the filter housing provides mounting slots on all four sides and the pressure and return connections are available on the side and the back of the Bypass unit. In recent years RMF Systems have developed a great deal of experience in cleaning and keeping clean hydraulic and transmission systems on: excavators wheel loaders forestry machines asphalt machines concrete pumps aviation ground support equipment agricultural machines Advantages Extremely clean oil due to high filtration efficiency Prevention of channel forming by radial filtration direction Large dirt and water holding capacity Compact and easy-maintenance design Environmentally friendly elements available Longer usage life for oil and components Reduces cost of ownership TDS -
Des-Case CB-01-03 Desiccant Breather
$48.38Wired Connected Breather power-data cable: M8 Right Angle Female, 4 Position Connector x Wire Leads, 10 ft Cable Assembly Connected Breathers Take a proactive approach to water ingression with the market’s first connected and most accurate breather. Unlike any other breather on the market, our connected breathers eliminate the subjectivity of color-changing desiccant media. Our patent pending IsoLogic® Sensor Technology provides a precise measurement of your breather’s life to eliminate replacing a breather too late or too soon. Shorten time-consuming, scheduled lube routes by collecting data on multiple breathers at the same time. Decrease the risk of workplace injuries by monitoring breathers installed on remote or hard-to-access equipment. View all breather statuses and trend data on the web platform from anywhere, anytime. All you need is the internet. Features By the Numbers 1. Sensors Measures critical values to calculate the remaining breather life, temperature and saturation direction. 2. Detachable Module Calculates the remaining breather life, temperature and saturation direction and stores breather data. 3. Threaded Mounting Internal threads provide durability and stability and can be used with one of several adapters. 4. Recessed Check-Valves High-quality umbrella check-valves that won’t clog or stick are recessed underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions, prolonging breather life. 5. Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 6. Resilient Polycarbonate Body Shock-absorbing, clear casing provides reliable service and easy maintenance. 7. Water Adsorbent Silica gel adsorbs water from incoming air and can hold up to 40% of its weight. 8. Secondary Filter Element Second polyester filter element protects against migration of desiccant dust, providing maximum efficiency. 9. Foam Pad Foam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. TDS -
Des-Case CLPC-0-M Compact Laser Particle Counter
$8,569.29Without RH moisture and temperature sensor, for Mineral Oil A compact, lightweight and budget-friendly particle counter featuring twin laser technology for accurate insight into oil cleanliness levels in your equipment. SpecificationsTECHNOLOGYTwin laser and twin optical diode detectors Based Light Extinction Automatic Optical Contamination MonitorCALIBRATIONEach unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171, on equipment certified by I.F.T.S. To ISO 11943ANALYSIS RANGE ISO 4406:2017 Code 8 to 24 NAS 1638 Class 2 to 12 AS4059 Rev. E. Table 1 Size Codes 2-12 AS4059 Rev. E. Table 2 Size Codes, A:000 to 12, B:00 to 12, C:00 to 12, D:2 to 12, E: 4 to 12,F: 7 to 12 Voltage 9-36 VDC Power Integrated rechargeable battery Pressure Range 29 – 5802 PSI (2 – 400 bar) Viscosity Range up to 400 cSt Weight 13.2 lb (6 kg) Fluid Temperature 41° F – 176° F (+5° C – +80° C ) Ambient Temperature 14° F – 140° F (-10° C – +60° C) Temperature Measurement ± 37.4° F (± 3° C ) Particle Sizing >4, 6, 14, 21, 25, 38, 50, 70 μm(c) to ISO 4406:2017 Standard Accuracy Better than 3% typical Data Storage 600 tests Communication Options USB communication port Environmental Protection IP51 (open lid) Moisture Sensing %RH (relative humidity) ± 3% Outer Case Material Injection Molded Ultra High Impact structural copolymer Software Des-Case View (included) Sample Volume / Test Time (seconds) 0.27 oz (8 ml) (short): 2:500.50 oz (15 ml) (normal): 5:001.01 oz (30 ml) (dynamic): 10:000.81 oz (24 ml) (bottle sampler): 8:000.51 oz (15 ml) (continuous): 5:00 Features Light and portable Integrated battery Full Calibration based on ISO11171 Data logging and 600 test result memory Manual and remote control flexibility TDS -
Des-Case CLPC-0-N Compact Laser Particle Counter
$9,858.67Without RH moisture and temperature sensor, for Mineral Oil A compact, lightweight and budget-friendly particle counter featuring twin laser technology for accurate insight into oil cleanliness levels in your equipment. SpecificationsTECHNOLOGYTwin laser and twin optical diode detectors Based Light Extinction Automatic Optical Contamination MonitorCALIBRATIONEach unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171, on equipment certified by I.F.T.S. To ISO 11943ANALYSIS RANGE ISO 4406:2017 Code 8 to 24 NAS 1638 Class 2 to 12 AS4059 Rev. E. Table 1 Size Codes 2-12 AS4059 Rev. E. Table 2 Size Codes, A:000 to 12, B:00 to 12, C:00 to 12, D:2 to 12, E: 4 to 12,F: 7 to 12 Voltage 9-36 VDC Power Integrated rechargeable battery Pressure Range 29 – 5802 PSI (2 – 400 bar) Viscosity Range up to 400 cSt Weight 13.2 lb (6 kg) Fluid Temperature 41° F – 176° F (+5° C – +80° C ) Ambient Temperature 14° F – 140° F (-10° C – +60° C) Temperature Measurement ± 37.4° F (± 3° C ) Particle Sizing >4, 6, 14, 21, 25, 38, 50, 70 μm(c) to ISO 4406:2017 Standard Accuracy Better than 3% typical Data Storage 600 tests Communication Options USB communication port Environmental Protection IP51 (open lid) Moisture Sensing %RH (relative humidity) ± 3% Outer Case Material Injection Molded Ultra High Impact structural copolymer Software Des-Case View (included) Sample Volume / Test Time (seconds) 0.27 oz (8 ml) (short): 2:500.50 oz (15 ml) (normal): 5:001.01 oz (30 ml) (dynamic): 10:000.81 oz (24 ml) (bottle sampler): 8:000.51 oz (15 ml) (continuous): 5:00 Features Light and portable Integrated battery Full Calibration based on ISO11171 Data logging and 600 test result memory Manual and remote control flexibility TDS -
Des-Case CLPC-0-S Compact Laser Particle Counter
$9,994.55Without RH moisture and temperature sensor, for Phosphate ester and aggressive fluids A compact, lightweight and budget-friendly particle counter featuring twin laser technology for accurate insight into oil cleanliness levels in your equipment. SpecificationsTECHNOLOGYTwin laser and twin optical diode detectors Based Light Extinction Automatic Optical Contamination MonitorCALIBRATIONEach unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171, on equipment certified by I.F.T.S. To ISO 11943ANALYSIS RANGE ISO 4406:2017 Code 8 to 24 NAS 1638 Class 2 to 12 AS4059 Rev. E. Table 1 Size Codes 2-12 AS4059 Rev. E. Table 2 Size Codes, A:000 to 12, B:00 to 12, C:00 to 12, D:2 to 12, E: 4 to 12,F: 7 to 12 Voltage 9-36 VDC Power Integrated rechargeable battery Pressure Range 29 – 5802 PSI (2 – 400 bar) Viscosity Range up to 400 cSt Weight 13.2 lb (6 kg) Fluid Temperature 41° F – 176° F (+5° C – +80° C ) Ambient Temperature 14° F – 140° F (-10° C – +60° C) Temperature Measurement ± 37.4° F (± 3° C ) Particle Sizing >4, 6, 14, 21, 25, 38, 50, 70 μm(c) to ISO 4406:2017 Standard Accuracy Better than 3% typical Data Storage 600 tests Communication Options USB communication port Environmental Protection IP51 (open lid) Moisture Sensing %RH (relative humidity) ± 3% Outer Case Material Injection Molded Ultra High Impact structural copolymer Software Des-Case View (included) Sample Volume / Test Time (seconds) 0.27 oz (8 ml) (short): 2:500.50 oz (15 ml) (normal): 5:001.01 oz (30 ml) (dynamic): 10:000.81 oz (24 ml) (bottle sampler): 8:000.51 oz (15 ml) (continuous): 5:00 Features Light and portable Integrated battery Full Calibration based on ISO11171 Data logging and 600 test result memory Manual and remote control flexibility TDS -
Des-Case CLPC-W-M Compact Laser Particle Counter
$9,495.34With RH moisture and temperature sensor, for Mineral Oil A compact, lightweight and budget-friendly particle counter featuring twin laser technology for accurate insight into oil cleanliness levels in your equipment. SpecificationsTECHNOLOGYTwin laser and twin optical diode detectors Based Light Extinction Automatic Optical Contamination MonitorCALIBRATIONEach unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171, on equipment certified by I.F.T.S. To ISO 11943ANALYSIS RANGE ISO 4406:2017 Code 8 to 24 NAS 1638 Class 2 to 12 AS4059 Rev. E. Table 1 Size Codes 2-12 AS4059 Rev. E. Table 2 Size Codes, A:000 to 12, B:00 to 12, C:00 to 12, D:2 to 12, E: 4 to 12,F: 7 to 12 Voltage 9-36 VDC Power Integrated rechargeable battery Pressure Range 29 – 5802 PSI (2 – 400 bar) Viscosity Range up to 400 cSt Weight 13.2 lb (6 kg) Fluid Temperature 41° F – 176° F (+5° C – +80° C ) Ambient Temperature 14° F – 140° F (-10° C – +60° C) Temperature Measurement ± 37.4° F (± 3° C ) Particle Sizing >4, 6, 14, 21, 25, 38, 50, 70 μm(c) to ISO 4406:2017 Standard Accuracy Better than 3% typical Data Storage 600 tests Communication Options USB communication port Environmental Protection IP51 (open lid) Moisture Sensing %RH (relative humidity) ± 3% Outer Case Material Injection Molded Ultra High Impact structural copolymer Software Des-Case View (included) Sample Volume / Test Time (seconds) 0.27 oz (8 ml) (short): 2:500.50 oz (15 ml) (normal): 5:001.01 oz (30 ml) (dynamic): 10:000.81 oz (24 ml) (bottle sampler): 8:000.51 oz (15 ml) (continuous): 5:00 Features Light and portable Integrated battery Full Calibration based on ISO11171 Data logging and 600 test result memory Manual and remote control flexibility TDS -
Des-Case CMS-RDU2 Contamination Monitoring Sensor
$1,938.50Contamination Monitor Sensor Remote Display Unit with Keypad. The CMS in-line contamination monitor automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and cost are limited. Formats: ISO 4406:1999, NAS 1638, ES4059E Table 2, AS4059E Table 1, ISO 11218Accuracy: ± 1/2 code for 4, 6, 14 μm (c), ± 1 code for larger sizesCalibration: Each unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171 (1999) on equipment certified by IFTS.Hydraulic Fluid Compatibility: Mineral oil & petroleum based fluids (consult RMF Systems for other fluids)Flow Rate: 20-400 ml/minuteViscosity Range: max. 1000 cStFluid Temperature: -25° C to +80° CMax Working Pressure: 420 barElectrical Supply: Voltage 9 – 36V DCSeal Material: FPM (Viton) – Contact Des-Case regarding any fluids that are incompatible with FPM sealsTest Time: Adjustable 10 – 3600 seconds, factory set to 120 secondsMoisture Sensing: % RH (Relative Humidity) ±3%Temperature Measurement: ±3° CFlow Rate Measurement: Indication onlyData Storage: 4000 testsCommunication Options: RS 485, MODBUS, CANBUS, 4-20 mAAmbient Temperature: -25° C -to +80° C or -25° C to +55° C for K versionIP Rating: IP 65/67 versatile IK04 Impact protectionPhysical Dimensions: 123(H) x 142(W) x 65(D) mmWeight: 1,15 kg Sensors: Water and Temperature Sensor The water sensor option measures water content using a capacitive RH (relative humidity) sensor. The results is expressed as percentage saturation. 100% RH corresponds to the point at which free water exists in the fluid, i.e. the fluid is no longer able to hold the water in a dissolved solution. Software All CMS units are supplied with software to download automatically new results as they are generated, provided the test is done while being directly controlled by the software. Or alternatively historical results can be downloaded form the CMS’s inbuilt memory. The CMS memory has space for around 4000 log entries, when full, the oldest log entry is overwritten. Which test are logged, and when, are determined by the log settingsEach log entry is time-stamped and contains the CMS serial number, so that it can be identified later. Accessories CMS “USB-I” ConnectorThis is a ready-made solution for easily connecting a PC/ Laptop to the CMS. CMS-FC1A pressure compensated flow control valve specifically designed to fit the CMS. This may be needed if the application produces an oil flow greater than 400ml/min. TDS -
Des-Case CMS-USBi Contamination Monitoring Sensor
$749.04Contamination Monitor Sensor without Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2 connection, with 10 meter cable. The CMS in-line contamination monitor automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and cost are limited. Formats: ISO 4406:1999, NAS 1638, ES4059E Table 2, AS4059E Table 1, ISO 11218Accuracy: ± 1/2 code for 4, 6, 14 μm (c), ± 1 code for larger sizesCalibration: Each unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171 (1999) on equipment certified by IFTS.Hydraulic Fluid Compatibility: Mineral oil & petroleum based fluids (consult RMF Systems for other fluids)Flow Rate: 20-400 ml/minuteViscosity Range: max. 1000 cStFluid Temperature: -25° C to +80° CMax Working Pressure: 420 barElectrical Supply: Voltage 9 – 36V DCSeal Material: FPM (Viton) – Contact Des-Case regarding any fluids that are incompatible with FPM sealsTest Time: Adjustable 10 – 3600 seconds, factory set to 120 secondsMoisture Sensing: % RH (Relative Humidity) ±3%Temperature Measurement: ±3° CFlow Rate Measurement: Indication onlyData Storage: 4000 testsCommunication Options: RS 485, MODBUS, CANBUS, 4-20 mAAmbient Temperature: -25° C -to +80° C or -25° C to +55° C for K versionIP Rating: IP 65/67 versatile IK04 Impact protectionPhysical Dimensions: 123(H) x 142(W) x 65(D) mmWeight: 1,15 kg Sensors: Water and Temperature Sensor The water sensor option measures water content using a capacitive RH (relative humidity) sensor. The results is expressed as percentage saturation. 100% RH corresponds to the point at which free water exists in the fluid, i.e. the fluid is no longer able to hold the water in a dissolved solution. Software All CMS units are supplied with software to download automatically new results as they are generated, provided the test is done while being directly controlled by the software. Or alternatively historical results can be downloaded form the CMS’s inbuilt memory. The CMS memory has space for around 4000 log entries, when full, the oldest log entry is overwritten. Which test are logged, and when, are determined by the log settingsEach log entry is time-stamped and contains the CMS serial number, so that it can be identified later. Accessories CMS “USB-I” ConnectorThis is a ready-made solution for easily connecting a PC/ Laptop to the CMS. CMS-FC1A pressure compensated flow control valve specifically designed to fit the CMS. This may be needed if the application produces an oil flow greater than 400ml/min. TDS -
Des-Case CMS0M0RG1-2 Contamination Monitoring Sensor
$3,390.06Contamination Monitor Sensor without Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection, with 10 meter cable. The CMS in-line contamination monitor automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and cost are limited. Formats: ISO 4406:1999, NAS 1638, ES4059E Table 2, AS4059E Table 1, ISO 11218Accuracy: ± 1/2 code for 4, 6, 14 μm (c), ± 1 code for larger sizesCalibration: Each unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171 (1999) on equipment certified by IFTS.Hydraulic Fluid Compatibility: Mineral oil & petroleum based fluids (consult RMF Systems for other fluids)Flow Rate: 20-400 ml/minuteViscosity Range: max. 1000 cStFluid Temperature: -25° C to +80° CMax Working Pressure: 420 barElectrical Supply: Voltage 9 – 36V DCSeal Material: FPM (Viton) – Contact Des-Case regarding any fluids that are incompatible with FPM sealsTest Time: Adjustable 10 – 3600 seconds, factory set to 120 secondsMoisture Sensing: % RH (Relative Humidity) ±3%Temperature Measurement: ±3° CFlow Rate Measurement: Indication onlyData Storage: 4000 testsCommunication Options: RS 485, MODBUS, CANBUS, 4-20 mAAmbient Temperature: -25° C -to +80° C or -25° C to +55° C for K versionIP Rating: IP 65/67 versatile IK04 Impact protectionPhysical Dimensions: 123(H) x 142(W) x 65(D) mmWeight: 1,15 kg Sensors: Water and Temperature Sensor The water sensor option measures water content using a capacitive RH (relative humidity) sensor. The results is expressed as percentage saturation. 100% RH corresponds to the point at which free water exists in the fluid, i.e. the fluid is no longer able to hold the water in a dissolved solution. Software All CMS units are supplied with software to download automatically new results as they are generated, provided the test is done while being directly controlled by the software. Or alternatively historical results can be downloaded form the CMS’s inbuilt memory. The CMS memory has space for around 4000 log entries, when full, the oldest log entry is overwritten. Which test are logged, and when, are determined by the log settingsEach log entry is time-stamped and contains the CMS serial number, so that it can be identified later. Accessories CMS “USB-I” ConnectorThis is a ready-made solution for easily connecting a PC/ Laptop to the CMS. CMS-FC1A pressure compensated flow control valve specifically designed to fit the CMS. This may be needed if the application produces an oil flow greater than 400ml/min. TDS -
Des-Case CMS0MKRG1-2 Contamination Monitoring Sensor
$4,007.27Contamination Monitor Sensor without Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection, with 10 meter cable The CMS in-line contamination monitor automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and cost are limited. Formats: ISO 4406:1999, NAS 1638, ES4059E Table 2, AS4059E Table 1, ISO 11218Accuracy: ± 1/2 code for 4, 6, 14 μm (c), ± 1 code for larger sizesCalibration: Each unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171 (1999) on equipment certified by IFTS.Hydraulic Fluid Compatibility: Mineral oil & petroleum based fluids (consult RMF Systems for other fluids)Flow Rate: 20-400 ml/minuteViscosity Range: max. 1000 cStFluid Temperature: -25° C to +80° CMax Working Pressure: 420 barElectrical Supply: Voltage 9 – 36V DCSeal Material: FPM (Viton) – Contact Des-Case regarding any fluids that are incompatible with FPM sealsTest Time: Adjustable 10 – 3600 seconds, factory set to 120 secondsMoisture Sensing: % RH (Relative Humidity) ±3%Temperature Measurement: ±3° CFlow Rate Measurement: Indication onlyData Storage: 4000 testsCommunication Options: RS 485, MODBUS, CANBUS, 4-20 mAAmbient Temperature: -25° C -to +80° C or -25° C to +55° C for K versionIP Rating: IP 65/67 versatile IK04 Impact protectionPhysical Dimensions: 123(H) x 142(W) x 65(D) mmWeight: 1,15 kg Sensors: Water and Temperature Sensor The water sensor option measures water content using a capacitive RH (relative humidity) sensor. The results is expressed as percentage saturation. 100% RH corresponds to the point at which free water exists in the fluid, i.e. the fluid is no longer able to hold the water in a dissolved solution. Software All CMS units are supplied with software to download automatically new results as they are generated, provided the test is done while being directly controlled by the software. Or alternatively historical results can be downloaded form the CMS’s inbuilt memory. The CMS memory has space for around 4000 log entries, when full, the oldest log entry is overwritten. Which test are logged, and when, are determined by the log settingsEach log entry is time-stamped and contains the CMS serial number, so that it can be identified later. Accessories CMS “USB-I” ConnectorThis is a ready-made solution for easily connecting a PC/ Laptop to the CMS. CMS-FC1A pressure compensated flow control valve specifically designed to fit the CMS. This may be needed if the application produces an oil flow greater than 400ml/min. TDS -
Des-Case CMS0NKRG1-2 Contamination Monitoring Sensor
$4,509.28Contamination Monitor Sensor without Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2 connection, with 10 meter cable. The CMS in-line contamination monitor automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and cost are limited. Formats: ISO 4406:1999, NAS 1638, ES4059E Table 2, AS4059E Table 1, ISO 11218Accuracy: ± 1/2 code for 4, 6, 14 μm (c), ± 1 code for larger sizesCalibration: Each unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171 (1999) on equipment certified by IFTS.Hydraulic Fluid Compatibility: Mineral oil & petroleum based fluids (consult RMF Systems for other fluids)Flow Rate: 20-400 ml/minuteViscosity Range: max. 1000 cStFluid Temperature: -25° C to +80° CMax Working Pressure: 420 barElectrical Supply: Voltage 9 – 36V DCSeal Material: FPM (Viton) – Contact Des-Case regarding any fluids that are incompatible with FPM sealsTest Time: Adjustable 10 – 3600 seconds, factory set to 120 secondsMoisture Sensing: % RH (Relative Humidity) ±3%Temperature Measurement: ±3° CFlow Rate Measurement: Indication onlyData Storage: 4000 testsCommunication Options: RS 485, MODBUS, CANBUS, 4-20 mAAmbient Temperature: -25° C -to +80° C or -25° C to +55° C for K versionIP Rating: IP 65/67 versatile IK04 Impact protectionPhysical Dimensions: 123(H) x 142(W) x 65(D) mmWeight: 1,15 kg Sensors: Water and Temperature Sensor The water sensor option measures water content using a capacitive RH (relative humidity) sensor. The results is expressed as percentage saturation. 100% RH corresponds to the point at which free water exists in the fluid, i.e. the fluid is no longer able to hold the water in a dissolved solution. Software All CMS units are supplied with software to download automatically new results as they are generated, provided the test is done while being directly controlled by the software. Or alternatively historical results can be downloaded form the CMS’s inbuilt memory. The CMS memory has space for around 4000 log entries, when full, the oldest log entry is overwritten. Which test are logged, and when, are determined by the log settingsEach log entry is time-stamped and contains the CMS serial number, so that it can be identified later. Accessories CMS “USB-I” ConnectorThis is a ready-made solution for easily connecting a PC/ Laptop to the CMS. CMS-FC1A pressure compensated flow control valve specifically designed to fit the CMS. This may be needed if the application produces an oil flow greater than 400ml/min. TDS -
Des-Case CMS0SKRG1-2 Contamination Monitoring Sensor
$5,243.27Contamination Monitor Sensor without Moisture sensor, for offshore and selected water based fluids, display, customizable relay, M16x2 connection, with 10 meter cable. The CMS in-line contamination monitor automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and cost are limited. Formats: ISO 4406:1999, NAS 1638, ES4059E Table 2, AS4059E Table 1, ISO 11218Accuracy: ± 1/2 code for 4, 6, 14 μm (c), ± 1 code for larger sizesCalibration: Each unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171 (1999) on equipment certified by IFTS.Hydraulic Fluid Compatibility: Mineral oil & petroleum based fluids (consult RMF Systems for other fluids)Flow Rate: 20-400 ml/minuteViscosity Range: max. 1000 cStFluid Temperature: -25° C to +80° CMax Working Pressure: 420 barElectrical Supply: Voltage 9 – 36V DCSeal Material: FPM (Viton) – Contact Des-Case regarding any fluids that are incompatible with FPM sealsTest Time: Adjustable 10 – 3600 seconds, factory set to 120 secondsMoisture Sensing: % RH (Relative Humidity) ±3%Temperature Measurement: ±3° CFlow Rate Measurement: Indication onlyData Storage: 4000 testsCommunication Options: RS 485, MODBUS, CANBUS, 4-20 mAAmbient Temperature: -25° C -to +80° C or -25° C to +55° C for K versionIP Rating: IP 65/67 versatile IK04 Impact protectionPhysical Dimensions: 123(H) x 142(W) x 65(D) mmWeight: 1,15 kg Sensors: Water and Temperature Sensor The water sensor option measures water content using a capacitive RH (relative humidity) sensor. The results is expressed as percentage saturation. 100% RH corresponds to the point at which free water exists in the fluid, i.e. the fluid is no longer able to hold the water in a dissolved solution. Software All CMS units are supplied with software to download automatically new results as they are generated, provided the test is done while being directly controlled by the software. Or alternatively historical results can be downloaded form the CMS’s inbuilt memory. The CMS memory has space for around 4000 log entries, when full, the oldest log entry is overwritten. Which test are logged, and when, are determined by the log settingsEach log entry is time-stamped and contains the CMS serial number, so that it can be identified later. Accessories CMS “USB-I” ConnectorThis is a ready-made solution for easily connecting a PC/ Laptop to the CMS. CMS-FC1A pressure compensated flow control valve specifically designed to fit the CMS. This may be needed if the application produces an oil flow greater than 400ml/min. TDS -
Des-Case CMSWM0RG1-2 Contamination Monitoring Sensor
$3,918.87Contamination Monitor Sensor with Moisture sensor, for mineral fluid, no display, customizable relay, M16x2 connection, with 10 meter cable. The CMS in-line contamination monitor automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and cost are limited. Formats: ISO 4406:1999, NAS 1638, ES4059E Table 2, AS4059E Table 1, ISO 11218Accuracy: ± 1/2 code for 4, 6, 14 μm (c), ± 1 code for larger sizesCalibration: Each unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171 (1999) on equipment certified by IFTS.Hydraulic Fluid Compatibility: Mineral oil & petroleum based fluids (consult RMF Systems for other fluids)Flow Rate: 20-400 ml/minuteViscosity Range: max. 1000 cStFluid Temperature: -25° C to +80° CMax Working Pressure: 420 barElectrical Supply: Voltage 9 – 36V DCSeal Material: FPM (Viton) – Contact Des-Case regarding any fluids that are incompatible with FPM sealsTest Time: Adjustable 10 – 3600 seconds, factory set to 120 secondsMoisture Sensing: % RH (Relative Humidity) ±3%Temperature Measurement: ±3° CFlow Rate Measurement: Indication onlyData Storage: 4000 testsCommunication Options: RS 485, MODBUS, CANBUS, 4-20 mAAmbient Temperature: -25° C -to +80° C or -25° C to +55° C for K versionIP Rating: IP 65/67 versatile IK04 Impact protectionPhysical Dimensions: 123(H) x 142(W) x 65(D) mmWeight: 1,15 kg Sensors: Water and Temperature Sensor The water sensor option measures water content using a capacitive RH (relative humidity) sensor. The results is expressed as percentage saturation. 100% RH corresponds to the point at which free water exists in the fluid, i.e. the fluid is no longer able to hold the water in a dissolved solution. Software All CMS units are supplied with software to download automatically new results as they are generated, provided the test is done while being directly controlled by the software. Or alternatively historical results can be downloaded form the CMS’s inbuilt memory. The CMS memory has space for around 4000 log entries, when full, the oldest log entry is overwritten. Which test are logged, and when, are determined by the log settingsEach log entry is time-stamped and contains the CMS serial number, so that it can be identified later. Accessories CMS “USB-I” ConnectorThis is a ready-made solution for easily connecting a PC/ Laptop to the CMS. CMS-FC1A pressure compensated flow control valve specifically designed to fit the CMS. This may be needed if the application produces an oil flow greater than 400ml/min. TDS -
Des-Case CMSWMKRG1-2 Contamination Monitoring Sensor
$4,534.54Contamination Monitor Sensor with Moisture sensor, for mineral fluid, display, customizable relay, M16x2 connection, with 10 meter cable. The CMS in-line contamination monitor automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and cost are limited. Formats: ISO 4406:1999, NAS 1638, ES4059E Table 2, AS4059E Table 1, ISO 11218Accuracy: ± 1/2 code for 4, 6, 14 μm (c), ± 1 code for larger sizesCalibration: Each unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171 (1999) on equipment certified by IFTS.Hydraulic Fluid Compatibility: Mineral oil & petroleum based fluids (consult RMF Systems for other fluids)Flow Rate: 20-400 ml/minuteViscosity Range: max. 1000 cStFluid Temperature: -25° C to +80° CMax Working Pressure: 420 barElectrical Supply: Voltage 9 – 36V DCSeal Material: FPM (Viton) – Contact Des-Case regarding any fluids that are incompatible with FPM sealsTest Time: Adjustable 10 – 3600 seconds, factory set to 120 secondsMoisture Sensing: % RH (Relative Humidity) ±3%Temperature Measurement: ±3° CFlow Rate Measurement: Indication onlyData Storage: 4000 testsCommunication Options: RS 485, MODBUS, CANBUS, 4-20 mAAmbient Temperature: -25° C -to +80° C or -25° C to +55° C for K versionIP Rating: IP 65/67 versatile IK04 Impact protectionPhysical Dimensions: 123(H) x 142(W) x 65(D) mmWeight: 1,15 kg Sensors: Water and Temperature Sensor The water sensor option measures water content using a capacitive RH (relative humidity) sensor. The results is expressed as percentage saturation. 100% RH corresponds to the point at which free water exists in the fluid, i.e. the fluid is no longer able to hold the water in a dissolved solution. Software All CMS units are supplied with software to download automatically new results as they are generated, provided the test is done while being directly controlled by the software. Or alternatively historical results can be downloaded form the CMS’s inbuilt memory. The CMS memory has space for around 4000 log entries, when full, the oldest log entry is overwritten. Which test are logged, and when, are determined by the log settingsEach log entry is time-stamped and contains the CMS serial number, so that it can be identified later. Accessories CMS “USB-I” ConnectorThis is a ready-made solution for easily connecting a PC/ Laptop to the CMS. CMS-FC1A pressure compensated flow control valve specifically designed to fit the CMS. This may be needed if the application produces an oil flow greater than 400ml/min. TDS -
Des-Case Compact Particle Counter
$22,596.80What is the Compact Particle Counter?The Compact Particle Counter (CPC) is a portable, lightweight contamination sensor designed for rapid, reliable field assessments. Engineered for mobility and ease of use, it delivers fast, accurate readings to help detect contamination across a wide range of environments. It measures contamination levels, moisture and temperature in fluids.What is on this listing?CPC-W-M-2, CPC-W-M-4. Each is a separate part number in the 2026 Des-Case price book, quoted and supplied by PE Energy.[PROOF: field observation, install or a customer application for this product, to be added by PE Energy] -
Des-Case CP01EB01 Compact Panel Unit
$2,525.881 gpm, 60 hz electric motor base model (for high viscosity oils up to ISO VG 460) with single-stage filtration A compact, permanently mounted, and continuous-duty filtration system that’s designed for critical applications and difficult-to-access equipment. Or, it can serve as a maintenance station Where It’s Used Decontaminating systems Collecting oil samples for analysis What Are the Features? Automatic pressure relief valve Compact size–60% smaller than our standard unit Plastic removable drip pan Industrial powder-coated paint One-year warranty What Can I Customize? Flow rates Sample valves Color Micron rating of filter Performance For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc plated steel and/or brass Pumps: Aluminum/steel Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi (5.49bar) Weight: Approximately 45-50lbs (will vary depending on options selected) Dimensions: 10.2"L x 18.2"W x 18.1"H TDS -
Des-Case CP03FB11 Compact Panel Unit
$2,692.543.5 gpm, .25 hp, 230 vac, 60 hz, 1725 rpms, 2.5 amps, 60 hz electric motor base model (for low viscosity oils up to ISO VG 100) with single-stage filtration and sample valves A compact, permanently mounted, and continuous-duty filtration system that’s designed for critical applications and difficult-to-access equipment. Or, it can serve as a maintenance station Where It’s Used Decontaminating systems Collecting oil samples for analysis What Are the Features? Automatic pressure relief valve Compact size–60% smaller than our standard unit Plastic removable drip pan Industrial powder-coated paint One-year warranty What Can I Customize? Flow rates Sample valves Color Micron rating of filter Performance For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc plated steel and/or brass Pumps: Aluminum/steel Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi (5.49bar) Weight: Approximately 45-50lbs (will vary depending on options selected) Dimensions: 10.2"L x 18.2"W x 18.1"H TDS -
Des-Case DAB1000022 Drum Adapter Kit
$269.06Protect and filter your drums right as they enter your plant and during storage with the easy-to-use drum adapter kit. Easily connect your drum of oil to your filtration system while keeping your lubricants and equipment clean and dry. The Key Benefits Prohibits entry of dirt and moistur Allows for easy equipment adaptation and quick connection to a filtration system Allows for customization What Are All the Features? Replaceable breather with color-indicating desiccant Quick connect plugs Sample valve 2" male NPT connection size Customizable colors TDS -
Des-Case DC-1 Desiccant Breather
Price range: $55.64 through $333.84Standard Desiccant Breathers Des-Case Standard breathers provide simple, yet dependable protection from moisture and particulate contamination in lubricants and equipment across multiple industries and applications. These versatile breathers are five times more effective than the leading non-desiccant breathers, providing optimal defense against humidity for your applications. Applications Totes Transformers Storage Tanks Hydraulics Features 1. Domed Cap A domed cap allows for better washdown runoff. 2. Integrated Nylon Standpipe The integrated standpipe provides excellent vibration resistance and dissipates impact throughout the unit, eliminating weak points. It also allows even airflow distribution throughout the unit, eliminating inaccurate readings of desiccant saturation. 3. External Ribs External ribs on shell to create greater durability and grip when installing or replacing breather. 4. Integrated Drip Ring An integrated drip ring keeps shedding water from entering the vent holes. 5. Threaded Mounting Easily replaces standard filler/breather cap with multi-fit connection or one of several adapters. 6. Air Vents Individual air intakes are opened based on flow requirements of the system. Plugs protect unit during shipping and storage. 7. Foam Pad Foam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. 8. Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 9. Enhanced Seal An enhanced seal eliminates potential for airflow bypass. Specifications Unit Height: 5.36 in (136 mm) Unit Diameter: 2.52 in (64 mm) Filter Efficiency: 3μ absolute (β3≥200) Amount of Silica Gel: 0.3 lbs (127 g) Adsorption Capacity: 1.7 fl oz (50 ml) Max. Flow Rate: 4 cfm (113 lpm) Temperature Range: -20°F to 200°F (-29°C to 93°C) Connection Size: 3/8″ Multi-Fit (NPT, NPSM, BSPP, BSPT) Max. Airflow at 1 psid: 30 gpm (113 lpm) Gearbox/Storage Tank Max. Volume: 35 gal (132 L) Hydraulic Reservoir Max. Volume: 5 gal (19 L) Micron Rating: 3 micron TDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE Standard Series Desiccant Breathers: How to Size DC-BB through DC-4 for Any Reservoir. Or listen on RSS.com. -
Des-Case DC-12-T Breather Adapter
$8.48Standard, Ventguard & Hydroguard Breather Adapters Nylon Threaded Flange Adapter Breather Connection Size: 1" NPT Female Equipment Connection Size: 6-Bolt Circular Mounting (Ø 2.9”) -
Des-Case DC-12-T-EX Breather Adapter
$83.03Steel Threaded Flange Adapter Breather Connection Size: 1" NPT MaleEquipment Connection Size: 6-Bolt Circular Mounting (Ø 2.9") -
Des-Case DC-12-T-SD Breather Adapter
$70.64Standard, Ventguard & Hydroguard Breather Adapters Steel Threaded Flange Adapter Breather Connection Size: 1" NPT Female Equipment Connection Size: 6-Bolt Circular Mounting (Ø 2.9”) -
Des-Case DC-12-TG Breather Adapter
$10.97Standard, Ventguard & Hydroguard Breather Adapters Nylon Threaded Flange Adapter with Gasket Breather Connection Size: 1" NPT Female Equipment Connection Size: 6-Bolt Circular Mounting (Ø 2.9”) -
Des-Case DC-12-TG-EX Breather Adapter
$85.57Steel Threaded Flange Adapter with Gasket Breather Connection Size: 1" NPT MaleEquipment Connection Size: 6-Bolt Circular Mounting (Ø 2.9")