Whitmore
Established in 1893, Whitmore is a global leader in providing innovative products and services that increase the reliability, performance, and lifespan of industrial assets.
PE Energy is an authorized Whitmore distributor. See our selection of Whitmore products.
Showing 1–15 of 981 results
-
1001 NON-AEROSOL SPRAY
Whitmore's 1001 spray is a multipurpose penetrating lubricant in an easy to use non-aerosol package. Designed for a wide variety of uses, Whitmore's 1001 can be used on wire ropes, cables, chains, and springs as well as most general maintenance applications. Whitmore's 1001 is an excellent penetrant, loosening rusted or corroded nuts and bolts, leaving a thin film of protective oil to reduce any additional metal oxidation. The unique packaging design of 1001 allows the product to be sprayed in any position, making it the ideal choice for hard-toreach places. Formulated with environmentally friendly additives, 1001 contains no propellants, is nonflammable, noncorrosive, and is classified as TCLP-SAFE. BENEFITS: CORROSION INHIBITED - protects against rust and corrosion. DISPLACES MOISTURE - leaves a protective coating of light oil. PENETRATES AND LUBRICATES - minimizes breaking of bolts and stripping of threads. GUARDS AGAINST WEAR - extends parts life. APPLICATIONS: 1001 Multipurpose Lubricant is an all-purpose, light, penetrating oil which is ideal for applications in general maintenance such as chains, wire ropes, cables, loosening rusted or corroded nuts and bolts, stopping squeaks, and lubricating pins, valves, and hinges Size and Type Container: CS Weight: 16 LBS -
5090B APPLIANCE LUBRICANT Drum Greases
Whitmore's 5090B Appliance Lubricant is a colorless, nontoxic grease designed for use where incidental contact with the skin or with food is possible. It is highly resistant to water and most cleaners. Whitmore's 5090B Appliance Lubricant contains no solids or substances that might cause staining. The high viscosity base oil provides excellent film strength. The gelling agent used creates a highly stable, nondrip grease at elevated temperatures. Whitmore's 5090B Appliance Lubricant is a true multipurpose grease that is compatible with plastics, elastomers, and other components normally found in toys, vehicles, and appliances. This lubricant should not be used in highly loaded equipment (steel mills, mining, etc.) or at temperatures consistently above 350°F (177°C).BENEFITS: WATER-RESISTANT - remains in place when the appliance is washed. SMOOTH CONSISTENCY - extremely adherent to metal, yet it does not attract dust. CORROSION INHIBITED - protects metal parts from rust. COLOR - colorless, slightly opaque, will not cause staining. NONDRIP - will not drip when exposed to temperatures up to 350°F (177°C).APPLICATIONS: Vehicle doors, sliding doors, plastics, toys, and appliances (except oven doors). Where a nonstaining or food grade product is required. Where product appearance is important. Where long product life is advantageous Size and Type Container: Drum Weight: 441 LBS. -
5090B APPLIANCE LUBRICANT Keg Greases
$1,528.79Whitmore's 5090B Appliance Lubricant is a colorless, nontoxic grease designed for use where incidental contact with the skin or with food is possible. It is highly resistant to water and most cleaners. Whitmore's 5090B Appliance Lubricant contains no solids or substances that might cause staining. The high viscosity base oil provides excellent film strength. The gelling agent used creates a highly stable, nondrip grease at elevated temperatures. Whitmore's 5090B Appliance Lubricant is a true multipurpose grease that is compatible with plastics, elastomers, and other components normally found in toys, vehicles, and appliances. This lubricant should not be used in highly loaded equipment (steel mills, mining, etc.) or at temperatures consistently above 350°F (177°C).BENEFITS: WATER-RESISTANT - remains in place when the appliance is washed. SMOOTH CONSISTENCY - extremely adherent to metal, yet it does not attract dust. CORROSION INHIBITED - protects metal parts from rust. COLOR - colorless, slightly opaque, will not cause staining. NONDRIP - will not drip when exposed to temperatures up to 350°F (177°C).APPLICATIONS: Vehicle doors, sliding doors, plastics, toys, and appliances (except oven doors). Where a nonstaining or food grade product is required. Where product appearance is important. Where long product life is advantageous Size and Type Container: Keg Weight: 134 LBS. -
5090B APPLIANCE LUBRICANT Pail Greases
$409.77Whitmore's 5090B Appliance Lubricant is a colorless, nontoxic grease designed for use where incidental contact with the skin or with food is possible. It is highly resistant to water and most cleaners. Whitmore's 5090B Appliance Lubricant contains no solids or substances that might cause staining. The high viscosity base oil provides excellent film strength. The gelling agent used creates a highly stable, nondrip grease at elevated temperatures. Whitmore's 5090B Appliance Lubricant is a true multipurpose grease that is compatible with plastics, elastomers, and other components normally found in toys, vehicles, and appliances. This lubricant should not be used in highly loaded equipment (steel mills, mining, etc.) or at temperatures consistently above 350°F (177°C).BENEFITS: WATER-RESISTANT - remains in place when the appliance is washed. SMOOTH CONSISTENCY - extremely adherent to metal, yet it does not attract dust. CORROSION INHIBITED - protects metal parts from rust. COLOR - colorless, slightly opaque, will not cause staining. NONDRIP - will not drip when exposed to temperatures up to 350°F (177°C).APPLICATIONS: Vehicle doors, sliding doors, plastics, toys, and appliances (except oven doors). Where a nonstaining or food grade product is required. Where product appearance is important. Where long product life is advantageous Size and Type Container: Pail Weight: 38 LBS. -
AFC 3WW Drum Greases
Whitmore's Anti-Friction Composition is a series of high performance sodium-based greases that are designed for use in slow-moving applications as encountered in industries such as mining, primary metals, cement, and aggregate production. The AFC greases are fibrous, stringy, and adhesive. Excess grease will form a collar or lip around the seal. This helps in keeping out dust and contaminants. AFC greases can be used in any bearing or other application where conventional grease is appropriate for lubrication; however they are particularly effective on plain bushings, whether Babbitt, bronze, or leaded steel. The natural adhesiveness of Whitmore's AFC greases provides excellent film forming characteristics and outstanding resistance to pound out. AFC greases meet the Extraction Procedure Toxicity guidelines established by the Environmental Protection Agency, which excludes them from the stringent storage and disposal requirements of the EPA Hazardous Waste law. Maximum DN factor for AFC No. 5 (NLGI grade 2): 180,000 Maximum continuous temperature: 200°F (93°C) Maximum occasional temperature: 250°F (121°C) Appearance: Black, stringy, adhesive BENEFITS: EXTREME LOAD-CARRYING ABILITY - protects from seizure during shock loads. REDUCES FRICTION AND WEAR - fortified with EP additives to provide longer equipment life. ENERGY EFFICIENT - lowers friction drag for reduced amperage draw. PROTECTS UNDER ADVERSE CONDITIONS - tough adhesive and cohesive thickener. SEALS OUT CONTAMINANTS – forms a fibrous seal to protect moving parts from dust. APPLICATIONS: Choose AFC greases where lubricated components are subjected to high load, slow speed, and contamination. Recommended for conveyor bearings, calendars, rubber mill bearings, and motor bearings in dusty conditions. Use in bearings in the primary metals or mining industries that operate under high load at slow speeds, i.e., crushers, shaker screens, pelletizers, and centrifuges. AFC greases are not suitable for use under water. Size and Type Container: Drum Weight: 426 LBS. -
AFC 3WW Keg Greases
Whitmore's Anti-Friction Composition is a series of high performance sodium-based greases that are designed for use in slow-moving applications as encountered in industries such as mining, primary metals, cement, and aggregate production. The AFC greases are fibrous, stringy, and adhesive. Excess grease will form a collar or lip around the seal. This helps in keeping out dust and contaminants. AFC greases can be used in any bearing or other application where conventional grease is appropriate for lubrication; however they are particularly effective on plain bushings, whether Babbitt, bronze, or leaded steel. The natural adhesiveness of Whitmore's AFC greases provides excellent film forming characteristics and outstanding resistance to pound out. AFC greases meet the Extraction Procedure Toxicity guidelines established by the Environmental Protection Agency, which excludes them from the stringent storage and disposal requirements of the EPA Hazardous Waste law. Maximum DN factor for AFC No. 5 (NLGI grade 2): 180,000 Maximum continuous temperature: 200°F (93°C) Maximum occasional temperature: 250°F (121°C) Appearance: Black, stringy, adhesive BENEFITS: EXTREME LOAD-CARRYING ABILITY - protects from seizure during shock loads. REDUCES FRICTION AND WEAR - fortified with EP additives to provide longer equipment life. ENERGY EFFICIENT - lowers friction drag for reduced amperage draw. PROTECTS UNDER ADVERSE CONDITIONS - tough adhesive and cohesive thickener. SEALS OUT CONTAMINANTS – forms a fibrous seal to protect moving parts from dust. APPLICATIONS: Choose AFC greases where lubricated components are subjected to high load, slow speed, and contamination. Recommended for conveyor bearings, calendars, rubber mill bearings, and motor bearings in dusty conditions. Use in bearings in the primary metals or mining industries that operate under high load at slow speeds, i.e., crushers, shaker screens, pelletizers, and centrifuges. AFC greases are not suitable for use under water. Size and Type Container: Keg Weight: 134 LBS. -
AFC 3WW Pail Greases
Whitmore's Anti-Friction Composition is a series of high performance sodium-based greases that are designed for use in slow-moving applications as encountered in industries such as mining, primary metals, cement, and aggregate production. The AFC greases are fibrous, stringy, and adhesive. Excess grease will form a collar or lip around the seal. This helps in keeping out dust and contaminants. AFC greases can be used in any bearing or other application where conventional grease is appropriate for lubrication; however they are particularly effective on plain bushings, whether Babbitt, bronze, or leaded steel. The natural adhesiveness of Whitmore's AFC greases provides excellent film forming characteristics and outstanding resistance to pound out. AFC greases meet the Extraction Procedure Toxicity guidelines established by the Environmental Protection Agency, which excludes them from the stringent storage and disposal requirements of the EPA Hazardous Waste law. Maximum DN factor for AFC No. 5 (NLGI grade 2): 180,000 Maximum continuous temperature: 200°F (93°C) Maximum occasional temperature: 250°F (121°C) Appearance: Black, stringy, adhesive BENEFITS: EXTREME LOAD-CARRYING ABILITY - protects from seizure during shock loads. REDUCES FRICTION AND WEAR - fortified with EP additives to provide longer equipment life. ENERGY EFFICIENT - lowers friction drag for reduced amperage draw. PROTECTS UNDER ADVERSE CONDITIONS - tough adhesive and cohesive thickener. SEALS OUT CONTAMINANTS – forms a fibrous seal to protect moving parts from dust. APPLICATIONS: Choose AFC greases where lubricated components are subjected to high load, slow speed, and contamination. Recommended for conveyor bearings, calendars, rubber mill bearings, and motor bearings in dusty conditions. Use in bearings in the primary metals or mining industries that operate under high load at slow speeds, i.e., crushers, shaker screens, pelletizers, and centrifuges. AFC greases are not suitable for use under water. Size and Type Container: Pail Weight: 35 LBS. -
AFC 5 50 CT CARTRIDGE Greases
Whitmore's Anti-Friction Composition is a series of high performance sodium-based greases that are designed for use in slow-moving applications as encountered in industries such as mining, primary metals, cement, and aggregate production. The AFC greases are fibrous, stringy, and adhesive. Excess grease will form a collar or lip around the seal. This helps in keeping out dust and contaminants. AFC greases can be used in any bearing or other application where conventional grease is appropriate for lubrication; however they are particularly effective on plain bushings, whether Babbitt, bronze, or leaded steel. The natural adhesiveness of Whitmore's AFC greases provides excellent film forming characteristics and outstanding resistance to pound out. AFC greases meet the Extraction Procedure Toxicity guidelines established by the Environmental Protection Agency, which excludes them from the stringent storage and disposal requirements of the EPA Hazardous Waste law. Maximum DN factor for AFC No. 5 (NLGI grade 2): 180,000 Maximum continuous temperature: 200°F (93°C) Maximum occasional temperature: 250°F (121°C) Appearance: Black, stringy, adhesive BENEFITS: EXTREME LOAD-CARRYING ABILITY - protects from seizure during shock loads. REDUCES FRICTION AND WEAR - fortified with EP additives to provide longer equipment life. ENERGY EFFICIENT - lowers friction drag for reduced amperage draw. PROTECTS UNDER ADVERSE CONDITIONS - tough adhesive and cohesive thickener. SEALS OUT CONTAMINANTS – forms a fibrous seal to protect moving parts from dust. APPLICATIONS: Choose AFC greases where lubricated components are subjected to high load, slow speed, and contamination. Recommended for conveyor bearings, calendars, rubber mill bearings, and motor bearings in dusty conditions. Use in bearings in the primary metals or mining industries that operate under high load at slow speeds, i.e., crushers, shaker screens, pelletizers, and centrifuges. AFC greases are not suitable for use under water. Size and Type Container: CS Weight: 50 LBS. -
AFC 5 Drum Greases
Whitmore's Anti-Friction Composition is a series of high performance sodium-based greases that are designed for use in slow-moving applications as encountered in industries such as mining, primary metals, cement, and aggregate production. The AFC greases are fibrous, stringy, and adhesive. Excess grease will form a collar or lip around the seal. This helps in keeping out dust and contaminants. AFC greases can be used in any bearing or other application where conventional grease is appropriate for lubrication; however they are particularly effective on plain bushings, whether Babbitt, bronze, or leaded steel. The natural adhesiveness of Whitmore's AFC greases provides excellent film forming characteristics and outstanding resistance to pound out. AFC greases meet the Extraction Procedure Toxicity guidelines established by the Environmental Protection Agency, which excludes them from the stringent storage and disposal requirements of the EPA Hazardous Waste law. Maximum DN factor for AFC No. 5 (NLGI grade 2): 180,000 Maximum continuous temperature: 200°F (93°C) Maximum occasional temperature: 250°F (121°C) Appearance: Black, stringy, adhesive BENEFITS: EXTREME LOAD-CARRYING ABILITY - protects from seizure during shock loads. REDUCES FRICTION AND WEAR - fortified with EP additives to provide longer equipment life. ENERGY EFFICIENT - lowers friction drag for reduced amperage draw. PROTECTS UNDER ADVERSE CONDITIONS - tough adhesive and cohesive thickener. SEALS OUT CONTAMINANTS – forms a fibrous seal to protect moving parts from dust. APPLICATIONS: Choose AFC greases where lubricated components are subjected to high load, slow speed, and contamination. Recommended for conveyor bearings, calendars, rubber mill bearings, and motor bearings in dusty conditions. Use in bearings in the primary metals or mining industries that operate under high load at slow speeds, i.e., crushers, shaker screens, pelletizers, and centrifuges. AFC greases are not suitable for use under water. Size and Type Container: Drum Weight: 431 LBS. -
AFC 5 Keg Greases
Whitmore's Anti-Friction Composition is a series of high performance sodium-based greases that are designed for use in slow-moving applications as encountered in industries such as mining, primary metals, cement, and aggregate production. The AFC greases are fibrous, stringy, and adhesive. Excess grease will form a collar or lip around the seal. This helps in keeping out dust and contaminants. AFC greases can be used in any bearing or other application where conventional grease is appropriate for lubrication; however they are particularly effective on plain bushings, whether Babbitt, bronze, or leaded steel. The natural adhesiveness of Whitmore's AFC greases provides excellent film forming characteristics and outstanding resistance to pound out. AFC greases meet the Extraction Procedure Toxicity guidelines established by the Environmental Protection Agency, which excludes them from the stringent storage and disposal requirements of the EPA Hazardous Waste law. Maximum DN factor for AFC No. 5 (NLGI grade 2): 180,000 Maximum continuous temperature: 200°F (93°C) Maximum occasional temperature: 250°F (121°C) Appearance: Black, stringy, adhesive BENEFITS: EXTREME LOAD-CARRYING ABILITY - protects from seizure during shock loads. REDUCES FRICTION AND WEAR - fortified with EP additives to provide longer equipment life. ENERGY EFFICIENT - lowers friction drag for reduced amperage draw. PROTECTS UNDER ADVERSE CONDITIONS - tough adhesive and cohesive thickener. SEALS OUT CONTAMINANTS – forms a fibrous seal to protect moving parts from dust. APPLICATIONS: Choose AFC greases where lubricated components are subjected to high load, slow speed, and contamination. Recommended for conveyor bearings, calendars, rubber mill bearings, and motor bearings in dusty conditions. Use in bearings in the primary metals or mining industries that operate under high load at slow speeds, i.e., crushers, shaker screens, pelletizers, and centrifuges. AFC greases are not suitable for use under water. Size and Type Container: Keg Weight: 134 LBS. -
AFC 5 Pail Greases
Whitmore's Anti-Friction Composition is a series of high performance sodium-based greases that are designed for use in slow-moving applications as encountered in industries such as mining, primary metals, cement, and aggregate production. The AFC greases are fibrous, stringy, and adhesive. Excess grease will form a collar or lip around the seal. This helps in keeping out dust and contaminants. AFC greases can be used in any bearing or other application where conventional grease is appropriate for lubrication; however they are particularly effective on plain bushings, whether Babbitt, bronze, or leaded steel. The natural adhesiveness of Whitmore's AFC greases provides excellent film forming characteristics and outstanding resistance to pound out. AFC greases meet the Extraction Procedure Toxicity guidelines established by the Environmental Protection Agency, which excludes them from the stringent storage and disposal requirements of the EPA Hazardous Waste law. Maximum DN factor for AFC No. 5 (NLGI grade 2): 180,000 Maximum continuous temperature: 200°F (93°C) Maximum occasional temperature: 250°F (121°C) Appearance: Black, stringy, adhesive BENEFITS: EXTREME LOAD-CARRYING ABILITY - protects from seizure during shock loads. REDUCES FRICTION AND WEAR - fortified with EP additives to provide longer equipment life. ENERGY EFFICIENT - lowers friction drag for reduced amperage draw. PROTECTS UNDER ADVERSE CONDITIONS - tough adhesive and cohesive thickener. SEALS OUT CONTAMINANTS – forms a fibrous seal to protect moving parts from dust. APPLICATIONS: Choose AFC greases where lubricated components are subjected to high load, slow speed, and contamination. Recommended for conveyor bearings, calendars, rubber mill bearings, and motor bearings in dusty conditions. Use in bearings in the primary metals or mining industries that operate under high load at slow speeds, i.e., crushers, shaker screens, pelletizers, and centrifuges. AFC greases are not suitable for use under water. Size and Type Container: Pail Weight: 38 LBS. -
Sale!
Air Sentry D-101 Desiccant Breather
$97.24 – $553.61D-Series Breathers feature numerous models in a variety of sizes, all designed to satisfy the requirements of most stationary fluid management applications. The breathers provide application flexibility by using 100% silica gel for moisture adsorption, 100% activated carbon for fume and odor control or both, when necessary. The D-Series is constructed of industrial grade raw materials, tested to ensure a wide range of chemical compatibilities, and features high impact resistant ABS top and bottom caps. The clear acrylic tube makes it easy to inspect the condition of the color-changing silica gel from a distance. The silica gel turns from gold to dark green to visually indicate the adsorption of moisture and confirm the breather is getting the job done! All D-Series models feature 2-micron solid particle filtration (one on the inlet and a second on the outlet) and are available with airflow ratings of 20 cfm. Operating Temperature: -20°F (-29°C) to +200F (+93°C) Specifications Base Material: 100% Silica Gel Height: 5 in 12.7 cm Diameter: 5 in 12.7 cm Mounting Connection: 1" slip fit Silica Gel: 1.4 lbs 0.6 kg Maximum Adsorption Capacity: 8.6 fl oz 254 mL Maximum Air Flow: 20 cfm Maximum Reservoir Fluid Flow: 150 gpm Type of Medium: 100% Silica Gel See all Air Sentry Desiccant Breathers. -
Sale!
Air Sentry D-102 Desiccant Breather
$112.65 – $641.38D-Series Breathers feature numerous models in a variety of sizes, all designed to satisfy the requirements of most stationary fluid management applications. The breathers provide application flexibility by using 100% silica gel for moisture adsorption, 100% activated carbon for fume and odor control or both, when necessary. The D-Series is constructed of industrial grade raw materials, tested to ensure a wide range of chemical compatibilities, and features high impact resistant ABS top and bottom caps. The clear acrylic tube makes it easy to inspect the condition of the color-changing silica gel from a distance. The silica gel turns from gold to dark green to visually indicate the adsorption of moisture and confirm the breather is getting the job done! All D-Series models feature 2-micron solid particle filtration (one on the inlet and a second on the outlet) and are available with airflow ratings of 20 cfm. Operating Temperature: -20°F (-29°C) to +200F (+93°C) Specifications Base Material: 100% Silica Gel Height: 8 in 20.3 cm Diameter: 5 in 12.7 cm Mounting Connection: 1" slip fit Silica Gel: 2.7 lbs 1.2 kg Maximum Adsorption Capacity: 16.56 fl oz 489 mL Maximum Air Flow: 20 cfm Maximum Reservoir Fluid Flow: 150 gpm Type of Medium: 100% Silica Gel See all Air Sentry Desiccant Breathers. -
Sale!
Air Sentry D-103 Desiccant Breather
$113.60 – $646.78D-Series Breathers feature numerous models in a variety of sizes, all designed to satisfy the requirements of most stationary fluid management applications. The breathers provide application flexibility by using 100% silica gel for moisture adsorption, 100% activated carbon for fume and odor control or both, when necessary. The D-Series is constructed of industrial grade raw materials, tested to ensure a wide range of chemical compatibilities, and features high impact resistant ABS top and bottom caps. The clear acrylic tube makes it easy to inspect the condition of the color-changing silica gel from a distance. The silica gel turns from gold to dark green to visually indicate the adsorption of moisture and confirm the breather is getting the job done! All D-Series models feature 2-micron solid particle filtration (one on the inlet and a second on the outlet) and are available with airflow ratings of 20 cfm. Operating Temperature: -20°F (-29°C) to +200F (+93°C) Specifications Base Material: 100% Silica Gel Height: 8 in 20.3 cm Diameter: 5 in 12.7 cm Mounting Connection: 1" MNPT Silica Gel: 2.7 lbs 1.2 kg Maximum Adsorption Capacity: 16.56 fl oz 489 mL Maximum Air Flow: 20 cfm Maximum Reservoir Fluid Flow: 150 gpm Type of Medium: 100% Silica Gel See all Air Sentry Desiccant Breathers. -
Sale!
Air Sentry D-104 Desiccant Breather
$113.60 – $646.78D-Series Breathers feature numerous models in a variety of sizes, all designed to satisfy the requirements of most stationary fluid management applications. The breathers provide application flexibility by using 100% silica gel for moisture adsorption, 100% activated carbon for fume and odor control or both, when necessary. The D-Series is constructed of industrial grade raw materials, tested to ensure a wide range of chemical compatibilities, and features high impact resistant ABS top and bottom caps. The clear acrylic tube makes it easy to inspect the condition of the color-changing silica gel from a distance. The silica gel turns from gold to dark green to visually indicate the adsorption of moisture and confirm the breather is getting the job done! All D-Series models feature 2-micron solid particle filtration (one on the inlet and a second on the outlet) and are available with airflow ratings of 20 cfm. Operating Temperature: -20°F (-29°C) to +200F (+93°C) Specifications Base Material: 100% Silica Gel Height: 8 in 20.3 cm Diameter: 5 in 12.7 cm Mounting Connection: 2" MNPT Silica Gel: 2.7 lbs 1.2 kg Maximum Adsorption Capacity: 16.56 fl oz 489 mL Maximum Air Flow: 20 cfm Maximum Reservoir Fluid Flow: 150 gpm Type of Medium: 100% Silica Gel See all Air Sentry Desiccant Breathers.