CTG
CTG (CT Gasket & Polymer Co.) Energizer™ low-torque flange gaskets and CTG sealing products from PE Energy, a supplier of CTG products. CTG, Inc. makes gaskets, seals and molded polymer parts in the USA, with headquarters in Houston, Texas. Its best-known product, the CTG Energizer gasket, is built for FRP, PVC, CPVC and PVDF flanges that need minimal bolt torque to seal. PE Energy quotes CTG Energizer gaskets in standard sizes from 1/2″ (CTG100100) to 24″ (CTG100119), and 26″ to 36″ by request, in NRT and ET styles with a TFM® or PTFE sealing face, plus elastomer-only ER and NRR styles.
CTG Energizer gaskets for data center cooling
According to CTG, the Energizer is widely used in data center cooling plants, where plastic piping with ANSI-style flanged joints carries glycol and water through constant thermal cycling. Its seamless TFM®/PTFE shield is bonded to a 65–75 durometer elastomer body and rated -40°F to 300°F.
See the full CTG Energizer size and part number chart with ID, OD, bolt circle and torque for steel and FRP flanges, or go straight to common sizes:
2″ (CTG100105) ·
4″ (CTG100109) ·
6″ (CTG100110) ·
12″ (CTG100113)
Download the CTG Energizer gasket data sheet (PDF): dimensions, torque values and elastomers for every size, with CTG’s gasket factor m of 2.0 and required seating stress y of 400 psi.
Other CTG products
PE Energy also quotes CTG backup rings, chevron and vee packings, flat gaskets, O-rings and X-rings, O-ring energized seals, spring energized seals, S-seals, T-seals and custom-molded parts. Request a quote with the CTG part number or a drawing, or call +1 (281) 310-0628.
CTG and Energizer™ (as a gasket product name) are trademarks of CTG, Inc.; TFM® is a trademark of 3M/Dyneon. PE Energy is an independent supplier of CTG products.
Showing all 9 results
-
CTG Energizer 1-1/2″ Low-Torque Flange Gasket (CTG100104)
CTG part number CTG100104 is the 1-1/2-inch CTG Energizer™ low-torque flange gasket from CTG, Inc. (CT Gasket & Polymer Co.): a 65–75 durometer elastomer body with a seamless TFM® or PTFE sealing face bonded to it, for FRP and plastic flanges that need minimal bolt torque to seal. It is one of 26 sizes in the line. See the full CTG Energizer size and part number chart. Request a quote for CTG100104 or call +1 (281) 310-0628 / pesales@pe-energy.com. Include the style (NRT or ET), shield (TFM® or PTFE) or elastomer, and quantity. What are the dimensions of the 1-1/2" CTG Energizer gasket (CTG100104)? Nominal pipe size1-1/2" CTG part numberCTG100104 Inside diameter (ID)1.72 in Outside diameter (OD)5 in Bolt circle3.875 in Bolt hole diameter0.62 in Number of bolt holes4 Gasket typeFull face The 4-hole, 3.875" bolt circle on this gasket corresponds to ASME B16.5 Class 150 flange drilling for 1-1/2" pipe, the pattern used on most ANSI-style FRP, PVC, CPVC and PVDF flanges. Confirm your flange rating before ordering. What bolt torque does the 1-1/2" CTG Energizer gasket need? Flange typeTorque (ft-lb) Steel flanges15-30 Dual / FRP flanges15 Source: CTG data sheet. Follow the flange maker's bolting procedure where stricter. Which style and material should I choose? NRT (no ribs) for raised or serrated flanges; ET (ribbed) for flat-faced or hand lay-up FRP flanges; at this size the ET has two sealing ribs. Shield: TFM® or PTFE. Details: CTG Energizer overview. Documents CTG Energizer Gaskets Data Sheet (PDF) CTG Energizer Gaskets Data Sheet with M and Y gasket factors (PDF) Other CTG Energizer sizes 1-1/4" (CTG100103) · 2" (CTG100105) · All sizes · All CTG products Trademarks belong to their owners; PE Energy is an independent supplier of CTG products. -
CTG Energizer 1-1/4″ Low-Torque Flange Gasket (CTG100103)
CTG part number CTG100103 is the 1-1/4-inch CTG Energizer™ low-torque flange gasket from CTG, Inc. (CT Gasket & Polymer Co.): a 65–75 durometer elastomer body with a seamless TFM® or PTFE sealing face bonded to it, for FRP and plastic flanges that need minimal bolt torque to seal. It is one of 26 sizes in the line. See the full CTG Energizer size and part number chart. Request a quote for CTG100103 or call +1 (281) 310-0628 / pesales@pe-energy.com. Include the style (NRT or ET), shield (TFM® or PTFE) or elastomer, and quantity. What are the dimensions of the 1-1/4" CTG Energizer gasket (CTG100103)? Nominal pipe size1-1/4" CTG part numberCTG100103 Inside diameter (ID)1.25 in Outside diameter (OD)4.63 in Bolt circle3.50 in Bolt hole diameter0.62 in Number of bolt holes4 Gasket typeFull face The 4-hole, 3.50" bolt circle on this gasket corresponds to ASME B16.5 Class 150 flange drilling for 1-1/4" pipe, the pattern used on most ANSI-style FRP, PVC, CPVC and PVDF flanges. Confirm your flange rating before ordering. What bolt torque does the 1-1/4" CTG Energizer gasket need? Flange typeTorque (ft-lb) Steel flanges15-30 Dual / FRP flanges15 Source: CTG data sheet. Follow the flange maker's bolting procedure where stricter. Which style and material should I choose? NRT (no ribs) for raised or serrated flanges; ET (ribbed) for flat-faced or hand lay-up FRP flanges; at this size the ET has two sealing ribs. Shield: TFM® or PTFE. Details: CTG Energizer overview. Documents CTG Energizer Gaskets Data Sheet (PDF) CTG Energizer Gaskets Data Sheet with M and Y gasket factors (PDF) Other CTG Energizer sizes 1" (CTG100102) · 1-1/2" (CTG100104) · All sizes · All CTG products Trademarks belong to their owners; PE Energy is an independent supplier of CTG products. -
CTG Energizer 1″ Low-Torque Flange Gasket (CTG100102)
CTG part number CTG100102 is the 1-inch CTG Energizer™ low-torque flange gasket from CTG, Inc. (CT Gasket & Polymer Co.): a 65–75 durometer elastomer body with a seamless TFM® or PTFE sealing face bonded to it, for FRP and plastic flanges that need minimal bolt torque to seal. It is one of 26 sizes in the line. See the full CTG Energizer size and part number chart. Request a quote for CTG100102 or call +1 (281) 310-0628 / pesales@pe-energy.com. Include the style (NRT or ET), shield (TFM® or PTFE) or elastomer, and quantity. What are the dimensions of the 1" CTG Energizer gasket (CTG100102)? Nominal pipe size1" CTG part numberCTG100102 Inside diameter (ID)1.16 in Outside diameter (OD)4.25 in Bolt circle3.125 in Bolt hole diameter0.62 in Number of bolt holes4 Gasket typeFull face The 4-hole, 3.125" bolt circle on this gasket corresponds to ASME B16.5 Class 150 flange drilling for 1" pipe, the pattern used on most ANSI-style FRP, PVC, CPVC and PVDF flanges. Confirm your flange rating before ordering. What bolt torque does the 1" CTG Energizer gasket need? Flange typeTorque (ft-lb) Steel flanges15-25 Dual / FRP flanges15 Source: CTG data sheet. Follow the flange maker's bolting procedure where stricter. Which style and material should I choose? NRT (no ribs) for raised or serrated flanges; ET (ribbed) for flat-faced or hand lay-up FRP flanges; at this size the ET has two sealing ribs. Shield: TFM® or PTFE. Details: CTG Energizer overview. Documents CTG Energizer Gaskets Data Sheet (PDF) CTG Energizer Gaskets Data Sheet with M and Y gasket factors (PDF) Other CTG Energizer sizes 3/4" (CTG100101) · 1-1/4" (CTG100103) · All sizes · All CTG products Trademarks belong to their owners; PE Energy is an independent supplier of CTG products. -
CTG Energizer 1/2″ Low-Torque Flange Gasket (CTG100100)
CTG part number CTG100100 is the 1/2-inch CTG Energizer™ low-torque flange gasket from CTG, Inc. (CT Gasket & Polymer Co.): a 65–75 durometer elastomer body with a seamless TFM® or PTFE sealing face bonded to it, for FRP and plastic flanges that need minimal bolt torque to seal. It is one of 26 sizes in the line. See the full CTG Energizer size and part number chart. Request a quote for CTG100100 or call +1 (281) 310-0628 / pesales@pe-energy.com. Include the style (NRT or ET), shield (TFM® or PTFE) or elastomer, and quantity. What are the dimensions of the 1/2" CTG Energizer gasket (CTG100100)? Nominal pipe size1/2" CTG part numberCTG100100 Inside diameter (ID)0.71 in Outside diameter (OD)3.50 in Bolt circle2.38 in Bolt hole diameter0.62 in Number of bolt holes4 Gasket typeFull face The 4-hole, 2.38" bolt circle on this gasket corresponds to ASME B16.5 Class 150 flange drilling for 1/2" pipe, the pattern used on most ANSI-style FRP, PVC, CPVC and PVDF flanges. Confirm your flange rating before ordering. What bolt torque does the 1/2" CTG Energizer gasket need? Flange typeTorque (ft-lb) Steel flanges15-25 Dual / FRP flanges15 Source: CTG data sheet. Follow the flange maker's bolting procedure where stricter. Which style and material should I choose? NRT (no ribs) for raised or serrated flanges; ET (ribbed) for flat-faced or hand lay-up FRP flanges; at this size the ET has two sealing ribs. Shield: TFM® or PTFE. Details: CTG Energizer overview. Documents CTG Energizer Gaskets Data Sheet (PDF) CTG Energizer Gaskets Data Sheet with M and Y gasket factors (PDF) Other CTG Energizer sizes 3/4" (CTG100101) · All sizes · All CTG products Trademarks belong to their owners; PE Energy is an independent supplier of CTG products. -
CTG Energizer 2-1/2″ Low-Torque Flange Gasket (CTG100106)
CTG part number CTG100106 is the 2-1/2-inch CTG Energizer™ low-torque flange gasket from CTG, Inc. (CT Gasket & Polymer Co.): a 65–75 durometer elastomer body with a seamless TFM® or PTFE sealing face bonded to it, for FRP and plastic flanges that need minimal bolt torque to seal. It is one of 26 sizes in the line. See the full CTG Energizer size and part number chart. Request a quote for CTG100106 or call +1 (281) 310-0628 / pesales@pe-energy.com. Include the style (NRT or ET), shield (TFM® or PTFE) or elastomer, and quantity. What are the dimensions of the 2-1/2" CTG Energizer gasket (CTG100106)? Nominal pipe size2-1/2" CTG part numberCTG100106 Inside diameter (ID)2.50 in Outside diameter (OD)7 in Bolt circle5.50 in Bolt hole diameter0.75 in Number of bolt holes4 Gasket typeFull face The 4-hole, 5.50" bolt circle on this gasket corresponds to ASME B16.5 Class 150 flange drilling for 2-1/2" pipe, the pattern used on most ANSI-style FRP, PVC, CPVC and PVDF flanges. Confirm your flange rating before ordering. What bolt torque does the 2-1/2" CTG Energizer gasket need? Flange typeTorque (ft-lb) Steel flanges25-80 Dual / FRP flanges25 Source: CTG data sheet. Follow the flange maker's bolting procedure where stricter. Which style and material should I choose? NRT (no ribs) for raised or serrated flanges; ET (ribbed) for flat-faced or hand lay-up FRP flanges; at this size the ET has three sealing ribs. Shield: TFM® or PTFE. Details: CTG Energizer overview. Documents CTG Energizer Gaskets Data Sheet (PDF) CTG Energizer Gaskets Data Sheet with M and Y gasket factors (PDF) Other CTG Energizer sizes 2" (CTG100105) · 3" (CTG100107) · All sizes · All CTG products Trademarks belong to their owners; PE Energy is an independent supplier of CTG products. -
CTG Energizer 2″ Low-Torque Flange Gasket (CTG100105)
CTG part number CTG100105 is the 2-inch CTG Energizer™ low-torque flange gasket from CTG, Inc. (CT Gasket & Polymer Co.): a 65–75 durometer elastomer body with a seamless TFM® or PTFE sealing face bonded to it, for FRP and plastic flanges that need minimal bolt torque to seal. It is one of 26 sizes in the line. See the full CTG Energizer size and part number chart. Request a quote for CTG100105 or call +1 (281) 310-0628 / pesales@pe-energy.com. Include the style (NRT or ET), shield (TFM® or PTFE) or elastomer, and quantity. What are the dimensions of the 2" CTG Energizer gasket (CTG100105)? Nominal pipe size2" CTG part numberCTG100105 Inside diameter (ID)2.16 in Outside diameter (OD)6 in Bolt circle4.75 in Bolt hole diameter0.75 in Number of bolt holes4 Gasket typeFull face The 4-hole, 4.75" bolt circle on this gasket corresponds to ASME B16.5 Class 150 flange drilling for 2" pipe, the pattern used on most ANSI-style FRP, PVC, CPVC and PVDF flanges. Confirm your flange rating before ordering. What bolt torque does the 2" CTG Energizer gasket need? Flange typeTorque (ft-lb) Steel flanges25-50 Dual / FRP flanges25 Source: CTG data sheet. Follow the flange maker's bolting procedure where stricter. Which style and material should I choose? NRT (no ribs) for raised or serrated flanges; ET (ribbed) for flat-faced or hand lay-up FRP flanges; at this size the ET has three sealing ribs. Shield: TFM® or PTFE. Details: CTG Energizer overview. Documents CTG Energizer Gaskets Data Sheet (PDF) CTG Energizer Gaskets Data Sheet with M and Y gasket factors (PDF) Other CTG Energizer sizes 1-1/2" (CTG100104) · 2-1/2" (CTG100106) · All sizes · All CTG products Trademarks belong to their owners; PE Energy is an independent supplier of CTG products. -
CTG Energizer 3″ Low-Torque Flange Gasket (CTG100107)
CTG part number CTG100107 is the 3-inch CTG Energizer™ low-torque flange gasket from CTG, Inc. (CT Gasket & Polymer Co.): a 65–75 durometer elastomer body with a seamless TFM® or PTFE sealing face bonded to it, for FRP and plastic flanges that need minimal bolt torque to seal. It is one of 26 sizes in the line. See the full CTG Energizer size and part number chart. Request a quote for CTG100107 or call +1 (281) 310-0628 / pesales@pe-energy.com. Include the style (NRT or ET), shield (TFM® or PTFE) or elastomer, and quantity. What are the dimensions of the 3" CTG Energizer gasket (CTG100107)? Nominal pipe size3" CTG part numberCTG100107 Inside diameter (ID)3.15 in Outside diameter (OD)7.50 in Bolt circle6 in Bolt hole diameter0.75 in Number of bolt holes4 Gasket typeFull face The 4-hole, 6" bolt circle on this gasket corresponds to ASME B16.5 Class 150 flange drilling for 3" pipe, the pattern used on most ANSI-style FRP, PVC, CPVC and PVDF flanges. Confirm your flange rating before ordering. What bolt torque does the 3" CTG Energizer gasket need? Flange typeTorque (ft-lb) Steel flanges25-80 Dual / FRP flanges25 Source: CTG data sheet. Follow the flange maker's bolting procedure where stricter. Which style and material should I choose? NRT (no ribs) for raised or serrated flanges; ET (ribbed) for flat-faced or hand lay-up FRP flanges; at this size the ET has three sealing ribs. Shield: TFM® or PTFE. Details: CTG Energizer overview. Documents CTG Energizer Gaskets Data Sheet (PDF) CTG Energizer Gaskets Data Sheet with M and Y gasket factors (PDF) Other CTG Energizer sizes 2-1/2" (CTG100106) · 3-1/2" (CTG100108) · All sizes · All CTG products Trademarks belong to their owners; PE Energy is an independent supplier of CTG products. -
CTG Energizer 3/4″ Low-Torque Flange Gasket (CTG100101)
CTG part number CTG100101 is the 3/4-inch CTG Energizer™ low-torque flange gasket from CTG, Inc. (CT Gasket & Polymer Co.): a 65–75 durometer elastomer body with a seamless TFM® or PTFE sealing face bonded to it, for FRP and plastic flanges that need minimal bolt torque to seal. It is one of 26 sizes in the line. See the full CTG Energizer size and part number chart. Request a quote for CTG100101 or call +1 (281) 310-0628 / pesales@pe-energy.com. Include the style (NRT or ET), shield (TFM® or PTFE) or elastomer, and quantity. What are the dimensions of the 3/4" CTG Energizer gasket (CTG100101)? Nominal pipe size3/4" CTG part numberCTG100101 Inside diameter (ID)0.86 in Outside diameter (OD)3.88 in Bolt circle2.75 in Bolt hole diameter0.62 in Number of bolt holes4 Gasket typeFull face The 4-hole, 2.75" bolt circle on this gasket corresponds to ASME B16.5 Class 150 flange drilling for 3/4" pipe, the pattern used on most ANSI-style FRP, PVC, CPVC and PVDF flanges. Confirm your flange rating before ordering. What bolt torque does the 3/4" CTG Energizer gasket need? Flange typeTorque (ft-lb) Steel flanges15-25 Dual / FRP flanges15 Source: CTG data sheet. Follow the flange maker's bolting procedure where stricter. Which style and material should I choose? NRT (no ribs) for raised or serrated flanges; ET (ribbed) for flat-faced or hand lay-up FRP flanges; at this size the ET has two sealing ribs. Shield: TFM® or PTFE. Details: CTG Energizer overview. Documents CTG Energizer Gaskets Data Sheet (PDF) CTG Energizer Gaskets Data Sheet with M and Y gasket factors (PDF) Other CTG Energizer sizes 1/2" (CTG100100) · 1" (CTG100102) · All sizes · All CTG products Trademarks belong to their owners; PE Energy is an independent supplier of CTG products. -
CTG Energizer Low-Torque Flange Gaskets
What are CTG Energizer gaskets? The CTG Energizer™ is the low-torque flange gasket made by CTG, Inc. (CT Gasket & Polymer Co.) for FRP and plastic piping systems: a 65–75 durometer elastomer body with a seamless sealing face of 100% virgin TFM® or PTFE totally bonded to it. CTG states it needs minimal torque to seal and will not come apart at the inside seam. PE Energy supplies CTG Energizer gaskets in standard sizes from 1/2" to 24", and 26" to 36" by request. Request a quote for any CTG Energizer part number or call +1 (281) 310-0628 / pesales@pe-energy.com. Include the style (NRT or ET), shield (TFM® or PTFE) or elastomer, and quantity. Are CTG Energizer gaskets used in data centers? CTG designed the Energizer for FRP and plastic piping systems, where flanges cannot take high bolt loads. According to CTG, it is widely used in data center cooling plants, where plastic piping (FRP, PVDF, HDPE) with ANSI-style flanged joints carries glycol and water and goes through constant thermal cycling. Which CTG Energizer part numbers are available? SizeCTG part numberID (in)OD (in)Bolt circle (in)Hole dia. (in)Bolt holesTorque, steel flanges (ft-lb)Torque, dual/FRP flanges (ft-lb) 1/2"CTG1001000.713.502.380.62415-2515 3/4"CTG1001010.863.882.750.62415-2515 1"CTG1001021.164.253.1250.62415-2515 1-1/4"CTG1001031.254.633.500.62415-3015 1-1/2"CTG1001041.7253.8750.62415-3015 2"CTG1001052.1664.750.75425-5025 2-1/2"CTG1001062.5075.500.75425-8025 3"CTG1001073.157.5060.75425-8025 3-1/2"CTG1001083.468.5070.75825-8025 4"CTG1001094.0697.500.75830-5530 5"CTG1001204.97108.500.88830-8030 6"CTG1001106.14119.500.88830-8030 8"CTG1001118.1013.5011.750.88840-12040 10"CTG10011210.131614.5011240-11540 12"CTG10011312.22191711240-15545 14"CTG10011413.872118.751.121250-23550 16"CTG10011515.8123.5021.251.121650-21050 18"CTG10011617.902522.751.251650-21050 20"CTG10011719.9627.50251.252060-22060 24"CTG10011923.943229.501.372065-30065 26"CTG1064852634.2531.751.382470-35070 28"CTG1064862836.50341.382880-40080 30"CTG1064873038.75361.382895-47595 32"CTG1066633241.7538.501.6228105-495105 34"CTG1064883443.7540.501.6232115-525115 36"CTG106892364642.751.6232135-575135 Per CTG: gaskets larger than 12" with a TFM® shield, and PTFE-shield gaskets larger than 24", are made by request. Source: CTG Energizer Gaskets data sheet. Which CTG Energizer style should I order? StyleConstructionUse on CTG Energizer NRT (no ribs)TFM® or PTFE shield bonded to elastomer body; will not interfere with the raised (serrated) portion of the flangeCast & ductile iron, CPVC, PVC, Fibercast FRP, machine-made FRP, press-molded FRP, PVDF, serrated or ribbed steel CTG Energizer ET (ribbed)Three sealing ribs (two below 2"), increased shield thicknessContact-molded and hand lay-up FRP; flat-faced flanges with no ribs or serrations CTG Energizer ER (ribbed, elastomer only)Fully ribbed seal, no shield; EPDM, Viton®, HNBR, NBR and moreDuctile iron, fiberglass, FRP, plastic, PVC CTG Energizer NRR (no ribs, elastomer only)Flat elastomer gasket, ring face or full faceDuctile iron, fiberglass, FRP, plastic, PVC The CTG data sheet covers the NRT and ET styles; ER and NRR are listed on CTG's product page. Confirm the part number for ER and NRR styles when you request a quote. How is the CTG Energizer gasket built? Sealing surface: 100% pure virgin TFM® or PTFE, totally bonded to the gasket body (NRT and ET styles) Seamless, radius-style shield that will not come apart at the inside seam Body: 65–75 durometer elastomer; typical compression set of 15% or better Minimal torque required to seal Elastomers offered by CTG: Aflas®, Butyl, EPDM, Nitrile, Viton® A, Viton® B, Viton® GF, Viton® Extreme™ ET style also available as 100% elastomer, or with EPDM filler and PTFE shield Temperature range: -40°F to 300°F (-40°C to 149°C) Non-asbestos construction Gasket factor m: 2.0; required seating stress y: 400 psi; P × T max: 50,000 (psig × °F), per the CTG data sheet Documents CTG Energizer Gaskets Data Sheet (PDF) CTG Energizer Gaskets Data Sheet with M and Y gasket factors (PDF) All CTG products at PE Energy CTG and Energizer™ (as a gasket product name) are trademarks of CTG, Inc.; TFM® is a trademark of 3M/Dyneon; Viton® is a trademark of The Chemours Company; Aflas® is a trademark of AGC Inc. PE Energy is an independent supplier of CTG products. Specifications are from CTG published data and may change without notice.