Bostik
Showing all 38 results
-
Bostik Born2Bond GA-10 Gasketing Adhesive – 50 ml Accordion
$22.13 – $265.52Bostik Born2BondTM Gasketing anaerobic adhesives are a single component, cost effective alternative to conventional pre-formed gaskets on metal flanges. Flexible, durable and resistant to wear and tear, they can be used during installation or for preventative maintenance. Achieving 100% surface-to-surface contact, the adhesives create a cohesive, durable connection that can withstand vibration, extreme temperatures and exposure to oils, solvents and water. They also offer better stress distribution and, unlike traditional gaskets, do not require any ‘bedding-in’. GA-10 is an anaerobic gasketing material with high viscosity and medium strength. It is designed to withstand temperatures up to 200°C. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. KEY FEATURES Medium strength High viscosity / Paste Instant low pressure seal Outstanding fatigue strength Vibration resistant Corrosion prevention Prevents sagging and micro-movement Higher power transmission Single component Suitable for active and passive metals DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated. 2. The product is designed for close fitting flanged parts with gaps up to 0.25 mm. 3. Apply manually as a continuous bead or by screen-printing to one surface of the flanges. 4. If the cure speed is too slow, use Born2BondTM Anaerobic Activator. 5. Tighten flanges after application. 6. Cured product can be removed by using of Born2BondTM Gasket &Adhesive Remover and a soft scraper. 7. Finish the cleaning process with a Born2BondTM Pre-bonding Cleaner soaked soft cloth. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Engines and powertrains Pumps and compressors Storage of liquids and gas Gearboxes and transmissions STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond GA-18 Gasketing Adhesive – 50 ml Bottle
$19.68 – $236.12Bostik Born2BondTM Gasketing anaerobic adhesives are a single-component, cost effective alternative to conventional preformed gaskets on metal flanges. Flexible, durable and resistant to wear and tear, they can be used during installation or for preventative maintenance. Achieving 100% surface-to-surface contact, the adhesives create a cohesive, durable connection that can withstand vibration, extreme temperatures and exposure to oils, solvents and water. They also offer better stress distribution and, unlike traditional gaskets, do not require any ‘bedding-in’. GA-18 is a general purpose anaerobic gasketing material with high viscosity and medium strength. It is recommended for use on rigid iron, steel and aluminum flanges. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. This product is acceptable for use as a sealant in and around food processing areas according to NSF S2 (Registration No.163873). KEY FEATURES Medium strength High viscosity / Paste Instant low pressure seal Outstanding fatigue strength Vibration resistant Corrosion prevention Prevents sagging and micro-movement Higher power transmission Single component Suitable for active and passive metals DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated. 2. The product is designed for close fitting flanged parts with gaps up to 0.25 mm. 3. Apply manually as a continuous bead or by screen-printing to one surface of the flanges. 4. If the cure speed is too slow, use Born2BondTM Anaerobic Activator. 5. Tighten flanges after application. 6. Cured product can be removed by using of Born2BondTM Gasket &Adhesive Remover and a soft scraper. 7. Finish the cleaning process with a Born2BondTM Pre-bonding Cleaner soaked soft cloth. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Engines and powertrains Pumps and compressors Storage of liquids and gas Gearboxes and transmissions STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond PA-42 Pipe Sealing Adhesive – 50 ml Accordion
$22.13 – $265.52Bostik Born2BondTM Pipe Sealing anaerobic adhesives are a reliable, adaptable solution, suitable for all types of threaded metal pipes and fittings, and both new installations and preventative maintenance. Filling and sealing all voids, these single component adhesives provide 100% surface-to-surface contact, achieving a cohesive, durable connection that will not fail even when subjected to vibration, extreme temperatures or chemical substances. A convenient, cost-effective alternative to conventional sealing alternatives like hemp or PTFE tapes, these adhesives eliminate the need for additional inventory. PA-42 is an anaerobic thread sealant material with medium viscosity and medium strength. Ideal for hydraulic valves and threaded couplings. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. KEY FEATURES Medium Strength Medium Viscosity & Thixotropic Instant low pressure seal Fluorescenic 100% connection – no loosening Vibration resistant Corrosion prevention Single component Suitable for active and passive metals DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding cleaner and wait until fully evaporated. 2. If the cure speed is too slow of on inactive metals, use Born2BondTM Anaerobic Activator. 3. Apply the product into the threads, leaving the first thread free. Fill all voids thoroughly. 4. Properly tighten fittings with suitable tools. It will seal instantly to moderate pressures. 5. Wait for full cure to get maximum pressure resistance. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Engines and powertrains Pumps and compressors Storage of liquids and gas Gearboxes and transmissions STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond PA-67 Pipe Sealing Adhesive – 50 ml Accordion
$22.13 – $265.52Bostik Born2BondTM Pipe Sealing anaerobic adhesives are a reliable, adaptable solution, suitable for all types of threaded metal pipes and fittings, and both new installations and preventative maintenance. Filling and sealing all voids, these single component adhesives provide 100% surface-to-surface contact, achieving a cohesive, durable connection that will not fail even when subjected to vibration, extreme temperatures or chemical substances. A convenient, cost-effective alternative to conventional sealing alternatives like hemp or PTFE tapes, these adhesives eliminate the need for additional inventory. PA-67 is an anaerobic thread sealant material with medium viscosity and medium strength. Ideal for hydraulic valves and threaded couplings. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. KEY FEATURES Medium Strength Medium Viscosity & Thixotropic Instant low pressure seal Fluorescenic 100% connection – no loosening Vibration resistant Corrosion prevention Single component Suitable for active and passive metals DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding cleaner and wait until fully evaporated. 2. If the cure speed is too slow of on inactive metals, use Born2BondTM Anaerobic Activator. 3. Apply the product into the threads, leaving the first thread free. Fill all voids thoroughly. 4. Properly tighten fittings with suitable tools. It will seal instantly to moderate pressures. 5. Wait for full cure to get maximum pressure resistance. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Engines and powertrains Pumps and compressors Storage of liquids and gas Gearboxes and transmissions STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide -
Bostik Born2Bond PA-77 Pipe Sealing Adhesive – 50 ml Bottle
$22.13 – $265.52Bostik Born2BondTM Pipe Sealing anaerobic adhesives are a reliable, adaptable solution, suitable for all types of threaded metal pipes and fittings, and both new installations and preventative maintenance. Filling and sealing all voids, these single component adhesives provide 100% surface-to-surface contact, achieving a cohesive, durable connection that will not fail even when subjected to vibration, extreme temperatures or chemical substances. A convenient, cost-effective alternative to conventional sealing alternatives like hemp or PTFE tapes, these adhesives eliminate the need for additional inventory. PA-77 is an anaerobic thread sealant material with medium viscosity and medium strength. Ideal for hydraulic valves and threaded couplings. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. KEY FEATURES Medium Strength Medium Viscosity & Thixotropic Instant low pressure seal Fluorescenic 100% connection – no loosening Vibration resistant Corrosion prevention Single component Suitable for active and passive metals DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding cleaner and wait until fully evaporated. 2. If the cure speed is too slow of on inactive metals, use Born2BondTM Anaerobic Activator. 3. Apply the product into the threads, leaving the first thread free. Fill all voids thoroughly. 4. Properly tighten fittings with suitable tools. It will seal instantly to moderate pressures. 5. Wait for full cure to get maximum pressure resistance. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Engines and powertrains Pumps and compressors Storage of liquids and gas Gearboxes and transmissions STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond RA-03 Retaining Adhesive – 50 ml Bottle
$26.55 – $318.59Bostik Born2BondTM Retaining anaerobic adhesives are a cost effective, adaptable alternative or addition to mechanical retaining processes. Capable of bonding all types of cylindrical assemblies, these single-component solutions also seal all metal joints to eliminate the risk of fretting corrosion. They achieve 100% surface-to-surface contact, producing a cohesive, durable connection capable of withstanding vibration, extreme temperatures and chemical substances. RA-03 is a low viscosity, high strength anaerobic adhesive designed to retain cylindrical parts. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. This product is acceptable as a retaining compound in and around food processing areas according to NSF S5 (Registration No.163875). KEY FEATURES High strength Low viscosity High power transmission Resistance to dynamic loads Vibration resistant Recommended for gaps up to 0.15mm Corrosion prevention Single component DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated. 2. If the cure speed is too slow on inactive metals, use Born2BondTM Anaerobic Activator. 3. For slip fitted parts, apply the adhesive around the pin and the inside of the collar and rotate during assembly to ensure fully coverage. 4. For press fitted parts, apply adhesive fully to both surfaces and assemble at high pressure. 5. For shrink fitted parts, the adhesive should be on the pin, the collar should be heated. 6. Parts should be fixed until sufficient handling strength is achieved. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Gear manufacturing Machine engineering Bearing assembly Drive shafts STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond RA-20 Retaining Adhesive – 50 ml Bottle
$27.43 – $329.21Bostik Born2BondTM Retaining anaerobic adhesives are a cost effective, adaptable alternative or addition to mechanical retaining processes. Capable of bonding all types of cylindrical assemblies, these single-component solutions also seal all metal joints to eliminate the risk of fretting corrosion. They achieve 100% surface-to-surface contact, producing a cohesive, durable connection capable of withstanding vibration, extreme temperatures and chemical substances. RA-20 is a high viscosity, high strength anaerobic adhesive designed to retain cylindrical parts exposed to temperatures up to 230°C. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. KEY FEATURES High strength High viscosity High power transmission Resistance to dynamic loads Vibration resistant Corrosion prevention Recommended for gaps up to 0.2mm Single component Suitable for active and passive metals DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated. 2. If the cure speed is too slow on inactive metals, use Born2BondTM Anaerobic Activator. 3. For slip fitted parts, apply the adhesive around the pin and the inside of the collar and rotate during assembly to ensure fully coverage. 4. For press fitted parts, apply adhesive fully to both surfaces and assemble at high pressure. 5. For shrink fitted parts, the adhesive should be on the pin, the collar should be heated. 6. Parts should be fixed until sufficient handling strength is achieved. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Gear manufacturing Machine engineering Bearing assembly Drive shafts STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond RA-38 Retaining Adhesive – 50 ml Bottle
$26.55 – $318.59Bostik Born2BondTM Retaining anaerobic adhesives are a cost effective, adaptable alternative or addition to mechanical retaining processes. Capable of bonding all types of cylindrical assemblies, these single-component solutions also seal all metal joints to eliminate the risk of fretting corrosion. They achieve 100% surface-to-surface contact, producing a cohesive, durable connection capable of withstanding vibration, extreme temperatures and chemical substances. RA-38 is a medium viscosity, high strength anaerobic adhesive designed to retain cylindrical parts. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. KEY FEATURES High strength Medium viscosity High power transmission Resistance to dynamic loads Recommended for gaps up to 0.2mm Vibration resistant Corrosion prevention Single component Suitable for active and passive metals DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated. 2. If the cure speed is too slow on inactive metals, use Born2BondTM Anaerobic Activator. 3. For slip fitted parts, apply the adhesive around the pin and the inside of the collar and rotate during assembly to ensure fully coverage. 4. For press fitted parts, apply adhesive fully to both surfaces and assemble at high pressure. 5. For shrink fitted parts, the adhesive should be on the pin, the collar should be heated. 6. Parts should be fixed until sufficient handling strength is achieved. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Gear manufacturing Machine engineering Bearing assembly Drive shafts STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond RA-41 Retaining Adhesive – 50 ml Bottle
$26.55 – $318.59Bostik Born2BondTM Retaining anaerobic adhesives are a cost effective, adaptable alternative or addition to mechanical retaining processes. Capable of bonding all types of cylindrical assemblies, these single-component solutions also seal all metal joints to eliminate the risk of fretting corrosion. They achieve 100% surface-to-surface contact, producing a cohesive, durable connection capable of withstanding vibration, extreme temperatures and chemical substances. RA-41 is a medium viscosity, medium strength anaerobic adhesive designed to retain cylindrical parts. It is designed for service able assemblies like bearings of pumps. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. KEY FEATURES Medium strength Medium viscosity For servicable assemblies High power transmission Resistance to dynamic loads Recommended for gaps up to 0.1mm Vibration resistant Corrosion prevention Single component Suitable for active and passive metals DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated. 2. If the cure speed is too slow on inactive metals, use Born2BondTM Anaerobic Activator. 3. For slip fitted parts, apply the adhesive around the pin and the inside of the collar and rotate during assembly to ensure fully coverage. 4. For press fitted parts, apply adhesive fully to both surfaces and assemble at high pressure. 5. For shrink fitted parts, the adhesive should be on the pin, the collar should be heated. 6. Parts should be fixed until sufficient handling strength is achieved. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Gear manufacturing Machine engineering Bearing assembly Drive shafts STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond RA-48 Retaining Adhesive – 50 ml Bottle
$26.55 – $318.59Bostik Born2BondTM Retaining anaerobic adhesives are a cost effective, adaptable alternative or addition to mechanical retaining processes. Capable of bonding all types of cylindrical assemblies, these single-component solutions also seal all metal joints to eliminate the risk of fretting corrosion. They achieve 100% surface-to-surface contact, producing a cohesive, durable connection capable of withstanding vibration, extreme temperatures and chemical substances. RA-48 is a medium viscosity, high strength anaerobic adhesive designed to retain cylindrical parts. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. KEY FEATURES High strength Medium viscosity High power transmission Resistance to dynamic loads Recommended for gaps up to 0.15mm Vibration resistant Corrosion prevention Single component Suitable for active and passive metals DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated. 2. If the cure speed is too slow on inactive metals, use Born2BondTM Anaerobic Activator. 3. For slip fitted parts, apply the adhesive around the pin and the inside of the collar and rotate during assembly to ensure fully coverage. 4. For press fitted parts, apply adhesive fully to both surfaces and assemble at high pressure. 5. For shrink fitted parts, the adhesive should be on the pin, the collar should be heated. 6. Parts should be fixed until sufficient handling strength is achieved. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Gear manufacturing Machine engineering Bearing assembly Drive shafts STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond RA-60 Retaining Adhesive – 50 ml Bottle
$26.03 – $312.33Bostik Born2BondTM Retaining anaerobic adhesives are a cost effective, adaptable alternative or addition to mechanical retaining processes. Capable of bonding all types of cylindrical assemblies, these single-component solutions also seal all metal joints to eliminate the risk of fretting corrosion. They achieve 100% surface-to-surface contact, producing a cohesive, durable connection capable of withstanding vibration, extreme temperatures and chemical substances. RA-60 is a filled anaerobic retainer enabling repairs on worn-out parts. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. This product is acceptable as a retaining compound in and around food processing areas according to NSF S5 (Registration No.163877). KEY FEATURES High strength High viscosity / Paste High gap filling (up to 0.5mm) High power transmission Resistance to dynamic loads Vibration resistant Corrosion prevention Single component Suitable for active and passive metals DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated. 2. If the cure speed is too slow on inactive metals, use Born2BondTM Anaerobic Activator. 3. For slip fitted parts, apply the adhesive around the pin and the inside of the collar and rotate during assembly to ensure fully coverage. 4. For press fitted parts, apply adhesive fully to both surfaces and assemble at high pressure. 5. For shrink fitted parts, the adhesive should be on the pin, the collar should be heated. 6. Parts should be fixed until sufficient handling strength is achieved. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Gear manufacturing Machine engineering Bearing assembly Drive shafts STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond TA-22 Threadlocking Adhesive – 50 ml Bottle
$24.98 – $299.80Bostik Born2BondTM Threadlocking anaerobic adhesives provide single component, one-stop solutions for all threadlocking requirements, including preventive maintenance. Eliminating the cost and inconvenience of holding extensive inventory, these liquid adhesives fill and seal all voids to achieve a cohesive connection of metal parts that remains fixed even when subjected to extreme vibrations, temperatures or chemical substances. TA-22 is designed to lock and seal threaded fasteners which require easy disassembly with normal hand tools. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. This product is acceptable as a thread locking compound in and around food processing areas according to NSF S6 (Registration No.163870). KEY FEATURES Low strength Medium viscosity 100% connection - no loosening Evenly distribute force Vibration resistant Corrosion prevention Single component Suitable for active and passive metals Recommended for threads up to M20 DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated. 2. If the cure speed is too slow, use Born2BondTM Anaerobic Activator. 3. Shake the product before use. 4. Apply adhesive onto threads. 5. Assemble and tighten as required. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Mechanical parts assembly Machine engineering Gear manufacturing Engines and powertrains STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond TA-43 Threadlocking Adhesive – 1 lb Flat Top Can
$24.98 – $299.80Bostik Born2BondTM Threadlocking anaerobic adhesives provide single-component, one-stop solutions for all threadlocking requirements, including preventive maintenance. Eliminating the cost and inconvenience of holding extensive inventory, these liquid adhesives fill and seal all voids to achieve a cohesive connection of metal parts that remains fixed even when subjected to extreme vibrations, temperatures or chemical substances. TA-43 is a general purpose medium strength anaerobic adhesive designed to lock and seal threaded fasteners which require normal disassembly with standard hand tools. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. This product is acceptable as a thread locking compound in and around food processing areas according to NSF S6 (Registration No.163871). KEY FEATURES Medium strength Medium viscosity 100% connection - no loosening Evenly distribute force Vibration resistant Corrosion prevention Single component Suitable for active and passive metals Recommended for threads up to M36 DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated. 2. If the cure speed is too slow, use Born2BondTM Anaerobic Activator. 3. Shake the product before use. 4. Apply adhesive onto threads. 5. Assemble and tighten as required. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Mechanical parts assembly Machine engineering Gear manufacturing Engines and powertrains STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide TDS -
Bostik Born2Bond TA-71 Threadlocking Adhesive – 50 ml Bottle
$24.98 – $299.80Bostik Born2BondTM Threadlocking anaerobic adhesives provide single-component, one-stop solutions for all threadlocking requirements, including preventive maintenance. Eliminating the cost and inconvenience of holding extensive inventory, these liquid adhesives fill and seal all voids to achieve a cohesive connecton of metal parts that remains fixed even when subjected to extreme vibrations, temperatures or chemical substances. TA-70 is a general purpose high strength anaerobic adhesive designed to lock and seal threaded fasteners which require permanent assembly. Once cured the product prevents leakage and/or loosening of parts from vibration and shock. This product is acceptable as a thread locking compound in and around food processing areas according to NSF S6 (Registration No.163872). KEY FEATURES High strength Medium viscosity 100% connection - no loosening Recommended for threads up to M20 Evenly distribute force Vibration resistant Corrosion prevention Single component Suitable for active and passive metals DIRECTIONS FOR USE 1. For best results, clean all surfaces (internal and external) with Born2BondTM Pre-Bonding Cleaner and wait until fully evaporated. 2. If the cure speed is too slow, use Born2BondTM Anaerobic Activator. 3. Shake the product before use. 4. Apply adhesive onto threads. 5. Assemble and tighten as required. METHOD OF USE Manual: Directly from the bottle with or without dispensing tips for more precise dispensing. Semi-Automated: Use of pressure-time systems for accurate volume and larger series. Full-Automated: fully automated robot or application lines APPLICATIONS Mechanical parts assembly Machine engineering Gear manufacturing Engines and powertrains STORAGE/SHELF LIFE Store product in the unopened container in a dry area out of direct sunlight. Storage below 7°C or greater than 28°C can adversely affect product performance. If stored properly, this product has a shelf life of 24 months. HEALTH/SAFETY The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination. LIMITATIONS This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative. MRO Solutions Guide -
Bostik Never-Seez NBBT-16 Blue Moly – 1 lb Brush Top Can
$49.82 – $597.86Blue Moly is designed for applications requiring non-destructive assembly and disassembly where combinations of high loads, high temperatures and low speeds are encountered to reduce friction during assembly. Blue Moly withstands pressures of 300,000 PSI. The exclusive combination of molybdenum disulfide and pure nickel flake suspended in a premium grade grease works in a wide range of applications. Blue Moly is especially recommended for those applications in which graphite, zinc, lead and copper are prohibited or undesirable. The addition of special corrosion inhibitors makes Blue Moly an effective choice of use in harsh environments. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NBBT-8 Blue Moly – 8 oz Brush Top Can
$33.83 – $405.94Blue Moly is designed for applications requiring non-destructive assembly and disassembly where combinations of high loads, high temperatures and low speeds are encountered to reduce friction during assembly. Blue Moly withstands pressures of 300,000 PSI. The exclusive combination of molybdenum disulfide and pure nickel flake suspended in a premium grade grease works in a wide range of applications. Blue Moly is especially recommended for those applications in which graphite, zinc, lead and copper are prohibited or undesirable. The addition of special corrosion inhibitors makes Blue Moly an effective choice of use in harsh environments. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NG-165 Nickel Nuclear Grade – 1 lb Flat Top Can
$94.99 – $1,139.87Nickel Nuclear Grade is specially tested and certified pure for use in nuclear power plants. Each production lot of Nuclear Grade is tested for contaminants of sulfur, halogens and low-melt metals. Each container of Nuclear Grade is labeled with the lot and test report number to a certify purity. This is recommended for use when applications prohibit the presence of copper, especially when chemical resistance is required. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. SPECIFICATIONS: GE Nuclear Energy D50YP12 / GE D6Y6C1 FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NGBT-8 Nickel Nuclear Grade – 8 oz Brush Top Can
$58.06 – $696.70Nickel Nuclear Grade is specially tested and certified pure for use in nuclear power plants. Each production lot of Nuclear Grade is tested for contaminants of sulfur, halogens and low-melt metals. Each container of Nuclear Grade is labeled with the lot and test report number toacertify purity. This is recommended for use when applications prohibit the presence of copper, especially when chemical resistance is required. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. SPECIFICATIONS: GE Nuclear Energy D50YP12 / GE D6Y6C1 FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NGSS-160 NF High Temperature Stainless Nuclear Grade – 1 lb Flat Top Can
$74.99 – $899.93Never-Seez High Temperature Stainless Nuclear Grade is the premium grade anti-seize compound developed in conjunction with Electricite de France (EDF) for use in nuclear power plants to protect nuclear components from seizure and galling. Each production lot of Nuclear Grade is tested for contaminants of sulfur, halogens and low-melt metals, and each container is labeled with the lot number to certify purity. This was specifically designed for applications that cannot use nickel-based products. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. SPECIFICATIONS: GE Nuclear Energy D50YP12 FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NHTC-14 High Temp Bearing Lubricant – 14 oz Flat Top Can
$25.35 – $304.15Never-Seez High Temperature Bearing Lubricant is an exclusive combination of a specially formulated high temperature grease and lubricating enhancers that provide maximum high pressure resistance and long-lasting lubrications at high temperatures. High Temperature Bearing Lubricant is recommended for ball and roller bearings, bushings, open and a sealed bearings. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NMCBT-16 Mariner’s Choice – 1 lb Brush Top Can
$30.94 – $371.32Never-Seez Mariner’s Choice prevents rust, galling and galvanic corrosion in salt water, salt air and high moisture environments. Specially formulated for wet applications, this product was developed after years of working with marine engineers to provide superior part protection for above and below the water line applications without polluting the environment. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NMCBT-8 Mariner’s Choice – 8 oz Brush Top Can
$22.71 – $272.48Never-Seez Mariner’s Choice prevents rust, galling and galvanic corrosion in salt water, salt air and high moisture environments. Specially formulated for wet applications, this product was developed after years of working with marine engineers to provide superior part protection for above and below the water line applications without polluting the environment. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NPBT-16 Pipe Compound – 1 lb Brush Top Can
$36.93 – $443.18Never-Seez Pipe Compound is a superior lubricating and anti-seize compound formulated to provide maximum thread lubrication in a wide range of pipe threads and fittings. The use of polytetrafluoroethylene (PTFE) and other sealant enhancing additives in this product allows greater thread engagement and more positive sealing. These benefits assure more reliable sealing on “start-up” and throughout the life of the assembly. Pipe Compound also prevents corrosion and galling of threads for easy disassembly. Recommended for use on black iron, galvanized stainless steel and high pressure steam pipes in contact with cast iron, malleable iron, brass, stainless steel or galvanized fittings. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NPBT-8 Pipe Compound – 8 oz Brush Top Can
$23.42 – $281.01Never-Seez Pipe Compound is a superior lubricating and anti-seize compound formulated to provide maximum thread lubrication in a wide range of pipe threads and fittings. The use of polytetrafluoroethylene (PTFE) and other sealant enhancing additives in this product allows greater thread engagement and more positive sealing. These benefits assure more reliable sealing on “start-up” and throughout the life of the assembly. Pipe Compound also prevents corrosion and galling of threads for easy disassembly. Recommended for use on black iron, galvanized stainless steel and high pressure steam pipes in contact with cast iron, malleable iron, brass, stainless steel or galvanized fittings. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NS-160 Regular Grade – 1 lb Flat Top Can
$28.81 – $345.74Regular Grade, the "original" anti-seize compound and extreme pressure lubricant, protects metal parts against rust, corrosion and seizure. Formulated with copper, graphite, aluminum and other ingredients, this Never-Seez product can also protect parts in high heat, high pressure and corrosive environments. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSA-16 Regular Grade – 16 oz Aerosol Can
$23.14 – $277.70Regular Grade, the "original" anti-seize compound and extreme pressure lubricant, protects metal parts against rust, corrosion and seizure. Formulated with copper, graphite, aluminum and other ingredients, this Never-Seez product can also protect parts in high heat, high pressure and corrosive environments. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSB-150 Black Moly – 1 lb Flat Top Can
$54.38 – $652.50Black Moly lubricant is designed for industrial applications requiring non-destructive assembly and disassembly of components. This multi-purpose lubricant contains a high concentration of molybdenum disulfide, making it the most effective choice for extreme pressure applications, such as under heavy loads and slow speeds, which can result in boundary lubrication failure. Black Moly withstands pressures up to 500,000 PSI. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSB-4 Regular Grade – 4 oz Tube
$15.98 – $383.50Regular Grade, the "original" anti-seize compound and extreme pressure lubricant, protects metal parts against rust, corrosion and seizure. Formulated with copper, graphite, aluminum and other ingredients, this Never-Seez product can also protect parts in high heat, high pressure and corrosive environments. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSBT-16 Regular Grade – 1 lb Brush Top Can
$30.25 – $362.96Regular Grade, the "original" anti-seize compound and extreme pressure lubricant, protects metal parts against rust, corrosion and seizure. Formulated with copper, graphite, aluminum and other ingredients, this Never-Seez product can also protect parts in high heat, high pressure and corrosive environments. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSBT-16N Pure Nickel Special – 1 lb Brush Top Can
$51.58 – $618.92Never-Seez Pure Nickel Special and Nickel Nuclear Grade are superior, high temperature, extreme pressure anti-seize compounds. They contain flake particles of pure nickel, graphite and other additives in a special grease carrier found to enhance anti-seize performance. This is recommended for use when applications prohibit the presence of copper, especially when chemical resistance is required. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. SPECIFICATIONS: GE Nuclear Energy D50YP12 / GE D6Y6C1 FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSBT-8 Regular Grade – 8 oz Brush Top Can
$18.43 – $221.15Regular Grade, the "original" anti-seize compound and extreme pressure lubricant, protects metal parts against rust, corrosion and seizure. Formulated with copper, graphite, aluminum and other ingredients, this Never-Seez product can also protect parts in high heat, high pressure and corrosive environments. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSBT-8N Pure Nickel Special – 8 oz Brush Top Can
$29.54 – $354.44Never-Seez Pure Nickel Special and Nickel Nuclear Grade are superior, high temperature, extreme pressure anti-seize compounds. They contain flake particles of pure nickel, graphite and other additives in a special grease carrier found to enhance anti-seize performance. This is recommended for use when applications prohibit the presence of copper, especially when chemical resistance is required. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. SPECIFICATIONS: GE Nuclear Energy D50YP12 / GE D6Y6C1 FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSC-1 Regular Grade – 1 lb Flat Top Can
$31.54 – $378.45Regular Grade, the "original" anti-seize compound and extreme pressure lubricant, protects metal parts against rust, corrosion and seizure. Formulated with copper, graphite, aluminum and other ingredients, this Never-Seez product can also protect parts in high heat, high pressure and corrosive environments. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSN-165 Pure Nickel Special – 1 lb Flat Top Can
$50.04 – $600.47Regular Grade, the "original" anti-seize compound and extreme pressure lubricant, protects metal parts against rust, corrosion and seizure. Formulated with copper, graphite, aluminum and other ingredients, this Never-Seez product can also protect parts in high heat, high pressure and corrosive environments. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSSBT-16 High Temperature Stainless – 1 lb Brush Top Can
$44.27 – $531.22Never-Seez High Temperature Stainless is a stainless steel, graphite, aluminum based anti-seize compound formulated to protect against seizure and galling, galvanic and severe environmental corrosion. This is specifically designed for applications that cannot use nickel-based products. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. SPECIFICATIONS: GE Nuclear Energy D50YP12 FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSSBT-8 High Temperature Stainless – 8 oz Brush Top Can
$28.25 – $338.95Never-Seez High Temperature Stainless is a stainless steel, graphite, aluminum based anti-seize compound formulated to protect against seizure and galling, galvanic and severe environmental corrosion. This is specifically designed for applications that cannot use nickel-based products. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. SPECIFICATIONS: GE Nuclear Energy D50YP12 FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSWT-14 White Food Grade – 14 oz Flat Top Can
$45.30 – $543.58White Food Grade with polytetrafluoroethylene (PTFE) is a premium quality lubricant composed entirely of ingredients that meet FDA requirements for applications in which incidental food contact is possible. With an NSF International registered H-1 Rating, this product is for use in establishments operating under the Federal Meat and Poultry Products Inspection Program. The unique dispersion of FDA-approved PTFE provides additional lubricity especially when a thin film of lubricant is desirable. White Food Grade with PTFE is virtually odorless, colorless and tasteless. It is a multipurpose lubricant for varied services within a food handling plant. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure -
Bostik Never-Seez NSWT-1C White Food Grade – 14 oz Cartridge
$51.53 – $618.40White Food Grade with polytetrafluoroethylene (PTFE) is a premium quality lubricant composed entirely of ingredients that meet FDA requirements for applications in which incidental food contact is possible. With an NSF International registered H-1 Rating, this product is for use in establishments operating under the Federal Meat and Poultry Products Inspection Program. The unique dispersion of FDA-approved PTFE provides additional lubricity especially when a thin film of lubricant is desirable. White Food Grade with PTFE is virtually odorless, colorless and tasteless. It is a multipurpose lubricant for varied services within a food handling plant. For over half a century, Bostik’s Never-Seez product line has been recognized as the industry leader in anti-seize and lubricating compounds. Applied to nut and bolt assemblies, these compounds act as sealants and are carefully formulated to reduce friction and increase joint tightening capabilities. FEATURES Protection from seizure at high temperatures for stainless steel parts Resistance to galvanic action between dissimilar materials Prevention against galling Protection from carbon fusion, rust and corrosion Resistance to age deterioration, chemical and acid vapor, road salt, steam and water BENEFITS Bolts, flanges and other parts are removed in less time without damage Dissimilar materials do not react at contact interface and allow smooth operation Prevents damage at assembly, lowering scrap costs, speeding disassembly Parts do not corrode, extending service life and aiding in non-destructive disassembly Part life is extended and product durability enhanced Never-Seez products are also inert to most gases, including propane, butane, natural gas, helium, freon and nitrogen. Impervious to strong alkaline solutions, they offer excellent lubricity and resist hardening, separation and evaporation. TORQUE REDUCTION VALUE How Never-Seez Affects Torque and Clamping Force Compared to unlubricated fasteners*, the use of Never-Seez in an application provides: 1. The SAME clamping force when applying up to X% LESS torque. 2. X% MORE clamping force when applying the specified torque. WHY USE NEVER-SEEZ COMPOUNDS? Setting the industry standard, Never-Seez is specified for major industrial and government use, offering three key value propositions: SUPERIOR PART PROTECTION These Never-Seez compounds seal and protect metal parts under extreme conditions of heat, pressure and contamination. The protective coating remains even after extended exposure to the elements, ensuring trouble-free protection against seizure, corrosion, pitting and galling. RAPID PART DISASSEMBLY These compounds eliminate common seizure causes when disassembling machinery, piping and metal parts, such as thread distortion, effects of exposure and galvanic action. By avoiding these issues, parts can be disassembled without destruction. MANUFACTURING COST SAVINGS Never-Seez compounds reduce downtime and maintenance costs, especially due to their superior spreadability, enabling up to 6,480 sq. in. coverage per lb. based on 4 mil. film thickness. Bostik Never-Seez Brochure