Hoses
Showing all 32 results
-
R78325 – 3/8 in. O.D. x 250 ft. Long (9.5 mm O.D. x 76.2 m long)
Thermoplastic Tubing This tubing is used to make: Breakaway coupler drain lines Hydraulic reservoir bleed lines R78325 for 30 and 40 Series Row-Crop Tractors R80623 for 2150, 50 Series Row-Crop and 50 Series Four-Wheel Drive Tractors. Shipped in bulk length of 250 feet. A more economical way of making repairs. -
R80623 – 1/4 in. I.D. x 250 ft. Long (6.81 mm I.D. x 76.2 m long)
Thermoplastic Tubing This tubing is used to make: Breakaway coupler drain lines Hydraulic reservoir bleed lines R78325 for 30 and 40 Series Row-Crop Tractors R80623 for 2150, 50 Series Row-Crop and 50 Series Four-Wheel Drive Tractors. Shipped in bulk length of 250 feet. A more economical way of making repairs. -
TY21428 – 1 in. I.D. x 10 ft. Long (25.4 mm I.D. x 3048 mm long)
Low-pressure Rubber Hose Used to make hydraulic hose for low-pressure applications 200 psi rated For 50 Series Row-Crop Tractors Shipped in bulk length of 10 feet – economical way of making repairs -
TY26889 – Hydraulic hose, 1/2×24-in.
1/2-inch I.D. 2-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 1/2 in. (12.7 mm) Hose O.D.: 0.87 in (22 mm) Rated working pressure: 3,500 psi Min. burst pressure: 14,000 psi Min. bend radius: 7 in. (178 mm) Weight per foot: 0.46 lb. (0.69 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: Two braids of high tensile strength steel wire Cover: Thin, synthetic rubber, black, oil-and abrasion-resistant. Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26890 – Hydraulic hose, 1/2×36-in.
1/2-inch I.D. 2-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 1/2 in. (12.7 mm) Hose O.D.: 0.87 in (22 mm) Rated working pressure: 3,500 psi Min. burst pressure: 14,000 psi Min. bend radius: 7 in. (178 mm) Weight per foot: 0.46 lb. (0.69 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: Two braids of high tensile strength steel wire Cover: Thin, synthetic rubber, black, oil-and abrasion-resistant. Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26891 – Hydraulic hose, 1/2×48-in.
1/2-inch I.D. 2-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 1/2 in. (12.7 mm) Hose O.D.: 0.87 in (22 mm) Rated working pressure: 3,500 psi Min. burst pressure: 14,000 psi Min. bend radius: 7 in. (178 mm) Weight per foot: 0.46 lb. (0.69 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: Two braids of high tensile strength steel wire Cover: Thin, synthetic rubber, black, oil-and abrasion-resistant. Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26892 – Hydraulic hose, 1/2×60-in.
1/2-inch I.D. 2-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 1/2 in. (12.7 mm) Hose O.D.: 0.87 in (22 mm) Rated working pressure: 3,500 psi Min. burst pressure: 14,000 psi Min. bend radius: 7 in. (178 mm) Weight per foot: 0.46 lb. (0.69 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: Two braids of high tensile strength steel wire Cover: Thin, synthetic rubber, black, oil-and abrasion-resistant. Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26893 – Hydraulic hose, 1/2×72-in.
1/2-inch I.D. 2-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 1/2 in. (12.7 mm) Hose O.D.: 0.87 in (22 mm) Rated working pressure: 3,500 psi Min. burst pressure: 14,000 psi Min. bend radius: 7 in. (178 mm) Weight per foot: 0.46 lb. (0.69 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: Two braids of high tensile strength steel wire Cover: Thin, synthetic rubber, black, oil-and abrasion-resistant. Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26894 – Hydraulic hose, 1/2×88-in.
1/2-inch I.D. 2-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 1/2 in. (12.7 mm) Hose O.D.: 0.87 in (22 mm) Rated working pressure: 3,500 psi Min. burst pressure: 14,000 psi Min. bend radius: 7 in. (178 mm) Weight per foot: 0.46 lb. (0.69 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: Two braids of high tensile strength steel wire Cover: Thin, synthetic rubber, black, oil-and abrasion-resistant. Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26895 – Hydraulic hose, 1/2×96-in.
1/2-inch I.D. 2-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 1/2 in. (12.7 mm) Hose O.D.: 0.87 in (22 mm) Rated working pressure: 3,500 psi Min. burst pressure: 14,000 psi Min. bend radius: 7 in. (178 mm) Weight per foot: 0.46 lb. (0.69 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: Two braids of high tensile strength steel wire Cover: Thin, synthetic rubber, black, oil-and abrasion-resistant. Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26896 – Hydraulic hose, 1/2×108-in.
1/2-inch I.D. 2-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 1/2 in. (12.7 mm) Hose O.D.: 0.87 in (22 mm) Rated working pressure: 3,500 psi Min. burst pressure: 14,000 psi Min. bend radius: 7 in. (178 mm) Weight per foot: 0.46 lb. (0.69 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: Two braids of high tensile strength steel wire Cover: Thin, synthetic rubber, black, oil-and abrasion-resistant. Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26897 – Hydraulic hose, 1/2×120-in.
1/2-inch I.D. 2-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 1/2 in. (12.7 mm) Hose O.D.: 0.87 in (22 mm) Rated working pressure: 3,500 psi Min. burst pressure: 14,000 psi Min. bend radius: 7 in. (178 mm) Weight per foot: 0.46 lb. (0.69 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: Two braids of high tensile strength steel wire Cover: Thin, synthetic rubber, black, oil-and abrasion-resistant. Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26898 – Hydraulic hose, 1/2×144-in.
1/2-inch I.D. 2-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 1/2 in. (12.7 mm) Hose O.D.: 0.87 in (22 mm) Rated working pressure: 3,500 psi Min. burst pressure: 14,000 psi Min. bend radius: 7 in. (178 mm) Weight per foot: 0.46 lb. (0.69 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: Two braids of high tensile strength steel wire Cover: Thin, synthetic rubber, black, oil-and abrasion-resistant. Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26899 – Hydraulic hose, 3/8×24-in.
3/8-inch I.D. 1-Wire Braid, 3/4-16 O.R.B. Ends with O-Rings Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26900 – Hydraulic hose, 3/8×36-in.
3/8-inch I.D. 1-Wire Braid, 3/4-16 O.R.B. Ends with O-Rings Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26901 – Hydraulic hose, 3/8×48-in.
3/8-inch I.D. 1-Wire Braid, 3/4-16 O.R.B. Ends with O-Rings Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26902 – Hydraulic hose, 3/8×60-in.
3/8-inch I.D. 1-Wire Braid, 3/4-16 O.R.B. Ends with O-Rings Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26903 – Hydraulic hose, 3/8×72-in.
3/8-inch I.D. 1-Wire Braid, 3/4-16 O.R.B. Ends with O-Rings Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26904 – Hydraulic hose, 3/8×92-in.
3/8-inch I.D. 1-Wire Braid, 3/4-16 O.R.B. Ends with O-Rings Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26905 – Hydraulic hose, 3/8×108-in.
3/8-inch I.D. 1-Wire Braid, 3/4-16 O.R.B. Ends with O-Rings Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26906 – Hydraulic hose, 3/8×120-in.
3/8-inch I.D. 1-Wire Braid, 3/4-16 O.R.B. Ends with O-Rings Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26907 – Hydraulic hose, 3/8×144-in.
3/8-inch I.D. 1-Wire Braid, 3/4-16 O.R.B. Ends with O-Rings Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26908 – Hydraulic hose, 1/2×24-in.
1/2-inch 1-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26909 – Hydraulic hose, 1/2×36-in.
1/2-inch 1-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26910 – Hydraulic hose, 1/2×48-in.
1/2-inch 1-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26911 – Hydraulic hose, 1/2×60-in.
1/2-inch 1-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26912 – Hydraulic hose, 1/2×72-in.
1/2-inch 1-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26913 – Hydraulic hose, 1/2×88-in.
1/2-inch 1-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26914 – Hydraulic hose, 1/2×96-in.
1/2-inch 1-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26915 – Hydraulic hose, 1/2×108-in.
1/2-inch 1-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26916 – Hydraulic hose, 1/2×120-in.
1/2-inch 1-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications -
TY26917 – Hydraulic hose, 1/2×144-in.
1/2-inch 1-Wire Braid, 1/2-inch N.P.T. (National Pipe Taper) Specification Hose I.D.: 3/8 in. (10 mm) - 1/2 in. (12.7 mm) Hose O.D.: 0.62 in. (16 mm) - 0.75 in. (19 mm) Rated working pressure: 3,000 psi - 2,500 psi Min. burst pressure: 9,000 psi - 8,000 psi Min. bend radius: 2-1/2 in. (65 mm) - 3.50 in. (89 mm) Weight per foot: 19 lb. (0.28 kg/m) - 0.24 lb. (0.36 kg/m) Tube: Synthetic rubber, black, oil-resistant Reinforcement: One braid of high tensile steel wire Cover: Thin, synthetic rubber, black, oil - and abrasion-resistant Temperature range: -40o to +212o F (-40o C to +100o C) Pre-Cut Hydraulic Hoses Hoses come complete with fittings – one rigid coupling and one non-leak, swivel coupling (O-rings are included where required) Each hose is individually packaged with part number and size identification on carton Choose braided single- or double-wire hoses, 3/8-inch or 1/2-inch inside diameters All hoses meet or exceed SAE specifications