Drum Topper

3.5 gpm, .25 hp electric motor, 115 vac, 1725 rpms, 5 amps, electric 60 Hz motor base model (for low viscosity oils up to ISO VG 100) with standard features of 1" and 3/4" ISO B quick connects, 6' hoses, manual filter bypass, sample valves and dual-stage filtration Compact, portable and customized for your application, the drum topper is an option you can carry wherever you need to go. Our drum topper provides many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment Handheld Drum Toppers Compact, portable and customized for your application, the drum topper is an option you can carry wherever you need to go. Our drum topper provides many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment You can completely customize your drum topper below. Simply click on the desired options to create your specific drum topper unit. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 10-460 (2000ssu/431cSt) at 100°F/38°C within ambient temperature ranges of -8°F to 104°F (-22°C to 40°C) Materials: Frame: Aluminum Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi (5.49bar) Weight: Approximately 45-55lbs/20.4-24.9Kg (will vary depending on options selected) Dimensions: 24.5″L x 13.5″W x 15.4″H   FeaturesApplications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Topping off reservoirs Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 460 at 100°F/38°C within ambient temperature ranges of -8°F to 104°F (-22°C to 40°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 6 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads Dual-stage filtration 6′ hose assemblies with various quick connect options 25′ power cord (for electric motors only) Industrial powder-coated paint One-year warranty TDS