Filter Cart
Showing all 4 results
-
Des-Case FC02EB1BA00002 Filter Cart
$3,623.352 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler- NPT Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant. SpecificationsFor filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi Weight: Approximately 100-150lbs (will vary depending on options selected) Dimensions: 18.8″L x 21.5″W x 46.4″H FeaturesApplications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Reservoir top-offs Flushing systems Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation Dual-stage filtration 12′ hose assemblies with various quick connect options Pneumatic wheels for easy mobility Industrial powder-coated paint Heavy-duty cart with oil catch pan One-year warranty 25 ft cord (for electric motors only) TDS -
Des-Case FC05EB1BAB10Y2 Filter Cart
$4,043.595 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler- NPT, manual filter by-pass, standard sample valves, Y-strainer Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant. SpecificationsFor filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi Weight: Approximately 100-150lbs (will vary depending on options selected) Dimensions: 18.8″L x 21.5″W x 46.4″H FeaturesApplications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Reservoir top-offs Flushing systems Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation Dual-stage filtration 12′ hose assemblies with various quick connect options Pneumatic wheels for easy mobility Industrial powder-coated paint Heavy-duty cart with oil catch pan One-year warranty 25 ft cord (for electric motors only) TDS -
Des-Case FC08AB1BAB10Y2 Filter Cart
$4,604.008 gpm,1.7 hp, 0-3,000 rpm pneumatic motor model with manual filter bypass, sample valves, and Y-strainer Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant. SpecificationsFor filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi Weight: Approximately 100-150lbs (will vary depending on options selected) Dimensions: 18.8″L x 21.5″W x 46.4″H FeaturesApplications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Reservoir top-offs Flushing systems Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation Dual-stage filtration 12′ hose assemblies with various quick connect options Pneumatic wheels for easy mobility Industrial powder-coated paint Heavy-duty cart with oil catch pan One-year warranty 25 ft cord (for electric motors only) TDS -
Des-Case FC10EB1BAB10Y2 Filter Cart
$4,223.7110 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, manual filter bypass, sample valves, and Y-strainer Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant. SpecificationsFor filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi Weight: Approximately 100-150lbs (will vary depending on options selected) Dimensions: 18.8″L x 21.5″W x 46.4″H FeaturesApplications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Reservoir top-offs Flushing systems Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation Dual-stage filtration 12′ hose assemblies with various quick connect options Pneumatic wheels for easy mobility Industrial powder-coated paint Heavy-duty cart with oil catch pan One-year warranty 25 ft cord (for electric motors only) TDS