Whitmore

Showing 496–540 of 981 results

MATRIX EP 2 w/Liner Pail Greases
$281.50
Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed. Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing.Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN. Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). BENEFITS: LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slow moving bearings and bushings. APPLICATIONS:Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications. Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others. High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders. Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearingsSize and Type Container: Pail Weight: 38 LBS.
MATRIX LC 1 Drum Greases

Matrix LC is a heavy-duty addition to the Whitmore line of extreme pressure greases. This grease answers demands for a calcium sulfonate complex grease that is pumpable in cold weather and is suitable for higher speed bearings. When formulating Matrix LC, Whitmore chemists started with Matrix EP, which has been our flagship grease for several years. Several changes were made, including the use of a new polymer. All of the most notable benefits of Matrix EP were retained in Matrix LC including long life and outstanding wear protection. Needless to say, the rust protection afforded by the calcium sulfonate thickener remains. For high water wash and underwater applications choose Matrix EP. Matrix LC can be made available in two additional grades not listed below: Matrix 5M LC 2 (with 5% MoS2) and Matrix LC 1.5. BENEFITS: LONG LIFE - reduced re-lubrication frequency. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slower-moving bearings and bushings. WEAR PROTECTION – suitable for use in very heavily loaded bearings. APPLICATIONS: Besides electric motor bearings, Matrix LC is recommended for use in applications where re-lubrication is infrequent. This grease is suitable for highly loaded applications such as steel mill roll stands and slew ring bearings on hydraulic shovels. Matrix LC is recommended for single-point and centralized lubrication systems such as Lincoln, Graco, Farval, Vogel, etc. Size and Type Container: Drum Weight: 441 LBS.
MATRIX LC 1 Keg Greases

Matrix LC is a heavy-duty addition to the Whitmore line of extreme pressure greases. This grease answers demands for a calcium sulfonate complex grease that is pumpable in cold weather and is suitable for higher speed bearings. When formulating Matrix LC, Whitmore chemists started with Matrix EP, which has been our flagship grease for several years. Several changes were made, including the use of a new polymer. All of the most notable benefits of Matrix EP were retained in Matrix LC including long life and outstanding wear protection. Needless to say, the rust protection afforded by the calcium sulfonate thickener remains. For high water wash and underwater applications choose Matrix EP. Matrix LC can be made available in two additional grades not listed below: Matrix 5M LC 2 (with 5% MoS2) and Matrix LC 1.5. BENEFITS: LONG LIFE - reduced re-lubrication frequency. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slower-moving bearings and bushings. WEAR PROTECTION – suitable for use in very heavily loaded bearings. APPLICATIONS: Besides electric motor bearings, Matrix LC is recommended for use in applications where re-lubrication is infrequent. This grease is suitable for highly loaded applications such as steel mill roll stands and slew ring bearings on hydraulic shovels. Matrix LC is recommended for single-point and centralized lubrication systems such as Lincoln, Graco, Farval, Vogel, etc. Size and Type Container: Keg Weight: 134 LBS.
MATRIX LC 1 Liner Keg Greases
$779.22
Matrix LC is a heavy-duty addition to the Whitmore line of extreme pressure greases. This grease answers demands for a calcium sulfonate complex grease that is pumpable in cold weather and is suitable for higher speed bearings. When formulating Matrix LC, Whitmore chemists started with Matrix EP, which has been our flagship grease for several years. Several changes were made, including the use of a new polymer. All of the most notable benefits of Matrix EP were retained in Matrix LC including long life and outstanding wear protection. Needless to say, the rust protection afforded by the calcium sulfonate thickener remains. For high water wash and underwater applications choose Matrix EP. Matrix LC can be made available in two additional grades not listed below: Matrix 5M LC 2 (with 5% MoS2) and Matrix LC 1.5. BENEFITS: LONG LIFE - reduced re-lubrication frequency. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slower-moving bearings and bushings. WEAR PROTECTION – suitable for use in very heavily loaded bearings. APPLICATIONS: Besides electric motor bearings, Matrix LC is recommended for use in applications where re-lubrication is infrequent. This grease is suitable for highly loaded applications such as steel mill roll stands and slew ring bearings on hydraulic shovels. Matrix LC is recommended for single-point and centralized lubrication systems such as Lincoln, Graco, Farval, Vogel, etc. Size and Type Container: Keg Weight: 134 LBS.
MATRIX LC 2 50 CT CARTRIDGES Greases

Matrix LC is a heavy-duty addition to the Whitmore line of extreme pressure greases. This grease answers demands for a calcium sulfonate complex grease that is pumpable in cold weather and is suitable for higher speed bearings. When formulating Matrix LC, Whitmore chemists started with Matrix EP, which has been our flagship grease for several years. Several changes were made, including the use of a new polymer. All of the most notable benefits of Matrix EP were retained in Matrix LC including long life and outstanding wear protection. Needless to say, the rust protection afforded by the calcium sulfonate thickener remains. For high water wash and underwater applications choose Matrix EP. Matrix LC can be made available in two additional grades not listed below: Matrix 5M LC 2 (with 5% MoS2) and Matrix LC 1.5. BENEFITS: LONG LIFE - reduced re-lubrication frequency. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slower-moving bearings and bushings. WEAR PROTECTION – suitable for use in very heavily loaded bearings. APPLICATIONS: Besides electric motor bearings, Matrix LC is recommended for use in applications where re-lubrication is infrequent. This grease is suitable for highly loaded applications such as steel mill roll stands and slew ring bearings on hydraulic shovels. Matrix LC is recommended for single-point and centralized lubrication systems such as Lincoln, Graco, Farval, Vogel, etc. Size and Type Container: CS Weight: 54 LBS.
MATRIX LC 2 Drum Greases

Matrix LC is a heavy-duty addition to the Whitmore line of extreme pressure greases. This grease answers demands for a calcium sulfonate complex grease that is pumpable in cold weather and is suitable for higher speed bearings. When formulating Matrix LC, Whitmore chemists started with Matrix EP, which has been our flagship grease for several years. Several changes were made, including the use of a new polymer. All of the most notable benefits of Matrix EP were retained in Matrix LC including long life and outstanding wear protection. Needless to say, the rust protection afforded by the calcium sulfonate thickener remains. For high water wash and underwater applications choose Matrix EP. Matrix LC can be made available in two additional grades not listed below: Matrix 5M LC 2 (with 5% MoS2) and Matrix LC 1.5. BENEFITS: LONG LIFE - reduced re-lubrication frequency. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slower-moving bearings and bushings. WEAR PROTECTION – suitable for use in very heavily loaded bearings. APPLICATIONS: Besides electric motor bearings, Matrix LC is recommended for use in applications where re-lubrication is infrequent. This grease is suitable for highly loaded applications such as steel mill roll stands and slew ring bearings on hydraulic shovels. Matrix LC is recommended for single-point and centralized lubrication systems such as Lincoln, Graco, Farval, Vogel, etc. Size and Type Container: Drum Weight: 441 LBS.
MATRIX LC 2 Liner Keg Greases
$775.98
Matrix LC is a heavy-duty addition to the Whitmore line of extreme pressure greases. This grease answers demands for a calcium sulfonate complex grease that is pumpable in cold weather and is suitable for higher speed bearings. When formulating Matrix LC, Whitmore chemists started with Matrix EP, which has been our flagship grease for several years. Several changes were made, including the use of a new polymer. All of the most notable benefits of Matrix EP were retained in Matrix LC including long life and outstanding wear protection. Needless to say, the rust protection afforded by the calcium sulfonate thickener remains. For high water wash and underwater applications choose Matrix EP. Matrix LC can be made available in two additional grades not listed below: Matrix 5M LC 2 (with 5% MoS2) and Matrix LC 1.5. BENEFITS: LONG LIFE - reduced re-lubrication frequency. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slower-moving bearings and bushings. WEAR PROTECTION – suitable for use in very heavily loaded bearings. APPLICATIONS: Besides electric motor bearings, Matrix LC is recommended for use in applications where re-lubrication is infrequent. This grease is suitable for highly loaded applications such as steel mill roll stands and slew ring bearings on hydraulic shovels. Matrix LC is recommended for single-point and centralized lubrication systems such as Lincoln, Graco, Farval, Vogel, etc. Size and Type Container: Keg Weight: 134 LBS.
MATRIX LC 2 Pail Greases

Matrix LC is a heavy-duty addition to the Whitmore line of extreme pressure greases. This grease answers demands for a calcium sulfonate complex grease that is pumpable in cold weather and is suitable for higher speed bearings. When formulating Matrix LC, Whitmore chemists started with Matrix EP, which has been our flagship grease for several years. Several changes were made, including the use of a new polymer. All of the most notable benefits of Matrix EP were retained in Matrix LC including long life and outstanding wear protection. Needless to say, the rust protection afforded by the calcium sulfonate thickener remains. For high water wash and underwater applications choose Matrix EP. Matrix LC can be made available in two additional grades not listed below: Matrix 5M LC 2 (with 5% MoS2) and Matrix LC 1.5. BENEFITS: LONG LIFE - reduced re-lubrication frequency. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slower-moving bearings and bushings. WEAR PROTECTION – suitable for use in very heavily loaded bearings. APPLICATIONS: Besides electric motor bearings, Matrix LC is recommended for use in applications where re-lubrication is infrequent. This grease is suitable for highly loaded applications such as steel mill roll stands and slew ring bearings on hydraulic shovels. Matrix LC is recommended for single-point and centralized lubrication systems such as Lincoln, Graco, Farval, Vogel, etc. Size and Type Container: Pail Weight: 38 LBS.
Matrix M EP 1 Greases
Price range: $304.25 through $17,369.74
EXTREME-SERVICE GREASE with MOLY Whitmore® Matrix® M is a calcium sulfonate complex grease with molybdenum disulfide that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system itself has a protective effect, but the addition of moly creates a powerful layer of protection under conditions of extreme load and slow speed. Matrix M helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10-minute periods without melting or carbonizing. Benefits LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WEAR PROTECTION – recommended for slow to medium speed bearings and bushings. Especially useful for very high load applications. Specifications Certifications: Matrix M EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). GEP grades 0, 1 and 2 meet standards KP0R -20, KP1R-20 and KP2R-10 per DIN 51502. Type: Calcium Sulfonate Complex Grease w/ Moly Grade: EP 1, 2 Packaging: Cartridges (50/Case), Pails, Kegs, Drums, Plastic (Nonreturnable) Totes
Matrix M EP 2 Greases
Price range: $297.03 through $16,936.93
EXTREME-SERVICE GREASE with MOLY Whitmore® Matrix® M is a calcium sulfonate complex grease with molybdenum disulfide that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system itself has a protective effect, but the addition of moly creates a powerful layer of protection under conditions of extreme load and slow speed. Matrix M helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10-minute periods without melting or carbonizing. Benefits LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WEAR PROTECTION – recommended for slow to medium speed bearings and bushings. Especially useful for very high load applications. Specifications Certifications: Matrix M EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). GEP grades 0, 1 and 2 meet standards KP0R -20, KP1R-20 and KP2R-10 per DIN 51502. Type: Calcium Sulfonate Complex Grease w/ Moly Grade: EP 1, 2 Packaging: Cartridges (50/Case), Pails, Kegs, Drums, Plastic (Nonreturnable) Totes
MATRIX TK EP 2 50 CT CART Greases

Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed. Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing. Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN. Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). BENEFITS: LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slow moving bearings and bushings. APPLICATIONS: Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications. Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others. High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders. Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearings.Size and Type Container: CS Weight: 57 LBS.
MATRIX TK EP 2 Drum Greases

Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed. Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing. Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN. Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). BENEFITS: LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slow moving bearings and bushings. APPLICATIONS: Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications. Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others. High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders. Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearings.Size and Type Container: Drum Weight: 446 LBS.
MATRIX TK EP 2 Liner Pail Greases
$321.30
Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed. Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing. Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN. Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). BENEFITS: LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slow moving bearings and bushings. APPLICATIONS: Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications. Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others. High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders. Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearings.Size and Type Container: Pail Weight: 38 LBS.
MATRIX TK EP 2 Pail Greases

Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed. Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing. Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN. Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). BENEFITS: LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slow moving bearings and bushings. APPLICATIONS: Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications. Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others. High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders. Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearings.Size and Type Container: Pail Weight: 38 LBS.
MATRIX TK EP 2 w/LINER Drum Greases
$3,564.00
Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed. Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing. Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN. Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). BENEFITS: LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slow moving bearings and bushings. APPLICATIONS: Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications. Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others. High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders. Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearings.Size and Type Container: Drum Weight: 446 LBS.
MATRIX TK EP 2 w/Liner Keg Greases
$524.40
Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed. Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing. Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN. Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). BENEFITS: LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slow moving bearings and bushings. APPLICATIONS: Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications. Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others. High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders. Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearings.Size and Type Container: Keg Weight: 134 LBS.
MDLN FM GEAR OIL 80W90 DRUM Food Grade Lubricants

Medallion Food Machinery Gear Oils are blended using a new generation base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of convention base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. Medallion Food Machinery Gear Oils also contain effective antiwear additives to protect metal surfaces and reduce downtime due to component failure. Medallion Food Machinery Gear Oils are NSF Registered for H-1 authorized and can be used in food plants where incidental contact with edible products may occur. Medallion FM Gear Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher and is considered Kosher-pareve for year-round use including Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in food processing facilities where incidental contact may occur. EXCELLENT DEMULSIBILITY - separates readily from water. REDUCES WEAR - protects against scoring, scuffing and galling to increase gear and bearing life. EXTENDED OIL LIFE - free of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. IMPROVED ADHESIVENESS - insures a coating on the gears at start-up. APPLICATIONS: In addition to parallel-shaft gearboxes, Medallion Food Machinery Gear Oils are appropriate for moderately loaded worm gear drives, oiled bearings, and couplings. For ISO 220 viscosity grade use 80W-90. For ISO 320 or 460 choose 85W-140.Size and Type Container: Drum Weight: 438 LBS.
MDLN FM GEAR OIL 80W90 KEG Food Grade Lubricants

Medallion Food Machinery Gear Oils are blended using a new generation base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of convention base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. Medallion Food Machinery Gear Oils also contain effective antiwear additives to protect metal surfaces and reduce downtime due to component failure. Medallion Food Machinery Gear Oils are NSF Registered for H-1 authorized and can be used in food plants where incidental contact with edible products may occur. Medallion FM Gear Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher and is considered Kosher-pareve for year-round use including Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in food processing facilities where incidental contact may occur. EXCELLENT DEMULSIBILITY - separates readily from water. REDUCES WEAR - protects against scoring, scuffing and galling to increase gear and bearing life. EXTENDED OIL LIFE - free of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. IMPROVED ADHESIVENESS - insures a coating on the gears at start-up. APPLICATIONS: In addition to parallel-shaft gearboxes, Medallion Food Machinery Gear Oils are appropriate for moderately loaded worm gear drives, oiled bearings, and couplings. For ISO 220 viscosity grade use 80W-90. For ISO 320 or 460 choose 85W-140.Size and Type Container: Keg Weight: 129 LBS.
MDLN FM GEAR OIL 80W90 PAIL Food Grade Lubricants

Medallion Food Machinery Gear Oils are blended using a new generation base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of convention base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. Medallion Food Machinery Gear Oils also contain effective antiwear additives to protect metal surfaces and reduce downtime due to component failure. Medallion Food Machinery Gear Oils are NSF Registered for H-1 authorized and can be used in food plants where incidental contact with edible products may occur. Medallion FM Gear Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher and is considered Kosher-pareve for year-round use including Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in food processing facilities where incidental contact may occur. EXCELLENT DEMULSIBILITY - separates readily from water. REDUCES WEAR - protects against scoring, scuffing and galling to increase gear and bearing life. EXTENDED OIL LIFE - free of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. IMPROVED ADHESIVENESS - insures a coating on the gears at start-up. APPLICATIONS: In addition to parallel-shaft gearboxes, Medallion Food Machinery Gear Oils are appropriate for moderately loaded worm gear drives, oiled bearings, and couplings. For ISO 220 viscosity grade use 80W-90. For ISO 320 or 460 choose 85W-140.Size and Type Container: Pail Weight: 38 LBS.
MDLN FM GEAR OIL 85W140 DRUM Food Grade Lubricants

Medallion Food Machinery Gear Oils are blended using a new generation base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of convention base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. Medallion Food Machinery Gear Oils also contain effective antiwear additives to protect metal surfaces and reduce downtime due to component failure. Medallion Food Machinery Gear Oils are NSF Registered for H-1 authorized and can be used in food plants where incidental contact with edible products may occur. Medallion FM Gear Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher and is considered Kosher-pareve for year-round use including Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in food processing facilities where incidental contact may occur. EXCELLENT DEMULSIBILITY - separates readily from water. REDUCES WEAR - protects against scoring, scuffing and galling to increase gear and bearing life. EXTENDED OIL LIFE - free of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. IMPROVED ADHESIVENESS - insures a coating on the gears at start-up. APPLICATIONS: In addition to parallel-shaft gearboxes, Medallion Food Machinery Gear Oils are appropriate for moderately loaded worm gear drives, oiled bearings, and couplings. For ISO 220 viscosity grade use 80W-90. For ISO 320 or 460 choose 85W-140.Size and Type Container: Drum Weight: 438 LBS.
MDLN FM GEAR OIL 85W140 PAIL Food Grade Lubricants

Medallion Food Machinery Gear Oils are blended using a new generation base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of convention base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. Medallion Food Machinery Gear Oils also contain effective antiwear additives to protect metal surfaces and reduce downtime due to component failure. Medallion Food Machinery Gear Oils are NSF Registered for H-1 authorized and can be used in food plants where incidental contact with edible products may occur. Medallion FM Gear Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher and is considered Kosher-pareve for year-round use including Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in food processing facilities where incidental contact may occur. EXCELLENT DEMULSIBILITY - separates readily from water. REDUCES WEAR - protects against scoring, scuffing and galling to increase gear and bearing life. EXTENDED OIL LIFE - free of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. IMPROVED ADHESIVENESS - insures a coating on the gears at start-up. APPLICATIONS: In addition to parallel-shaft gearboxes, Medallion Food Machinery Gear Oils are appropriate for moderately loaded worm gear drives, oiled bearings, and couplings. For ISO 220 viscosity grade use 80W-90. For ISO 320 or 460 choose 85W-140.Size and Type Container: Pail Weight: 38 LBS.
MDLN FM GEAR OIL 85W140 TOTE Food Grade Lubricants

Medallion Food Machinery Gear Oils are blended using a new generation base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of convention base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. Medallion Food Machinery Gear Oils also contain effective antiwear additives to protect metal surfaces and reduce downtime due to component failure. Medallion Food Machinery Gear Oils are NSF Registered for H-1 authorized and can be used in food plants where incidental contact with edible products may occur. Medallion FM Gear Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher and is considered Kosher-pareve for year-round use including Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in food processing facilities where incidental contact may occur. EXCELLENT DEMULSIBILITY - separates readily from water. REDUCES WEAR - protects against scoring, scuffing and galling to increase gear and bearing life. EXTENDED OIL LIFE - free of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. IMPROVED ADHESIVENESS - insures a coating on the gears at start-up. APPLICATIONS: In addition to parallel-shaft gearboxes, Medallion Food Machinery Gear Oils are appropriate for moderately loaded worm gear drives, oiled bearings, and couplings. For ISO 220 viscosity grade use 80W-90. For ISO 320 or 460 choose 85W-140.Size and Type Container: One Way Tote Weight: 1,998 LBS.
MDLN FM GEAR OIL ISO 1000 KOSH DRUM Food Grade Lubricants

Medallion Food Machinery Gear Oils are blended using a new generation base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of convention base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. Medallion Food Machinery Gear Oils also contain effective antiwear additives to protect metal surfaces and reduce downtime due to component failure. Medallion Food Machinery Gear Oils are NSF Registered for H-1 authorized and can be used in food plants where incidental contact with edible products may occur. Medallion FM Gear Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher and is considered Kosher-pareve for year-round use including Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in food processing facilities where incidental contact may occur. EXCELLENT DEMULSIBILITY - separates readily from water. REDUCES WEAR - protects against scoring, scuffing and galling to increase gear and bearing life. EXTENDED OIL LIFE - free of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. IMPROVED ADHESIVENESS - insures a coating on the gears at start-up. APPLICATIONS: In addition to parallel-shaft gearboxes, Medallion Food Machinery Gear Oils are appropriate for moderately loaded worm gear drives, oiled bearings, and couplings. For ISO 220 viscosity grade use 80W-90. For ISO 320 or 460 choose 85W-140.Size and Type Container: Drum Weight: 438 LBS.
MDLN FM GEAR OIL ISO 1000 KOSH PAIL Food Grade Lubricants

Medallion Food Machinery Gear Oils are blended using a new generation base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of convention base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. Medallion Food Machinery Gear Oils also contain effective antiwear additives to protect metal surfaces and reduce downtime due to component failure. Medallion Food Machinery Gear Oils are NSF Registered for H-1 authorized and can be used in food plants where incidental contact with edible products may occur. Medallion FM Gear Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher and is considered Kosher-pareve for year-round use including Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in food processing facilities where incidental contact may occur. EXCELLENT DEMULSIBILITY - separates readily from water. REDUCES WEAR - protects against scoring, scuffing and galling to increase gear and bearing life. EXTENDED OIL LIFE - free of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. IMPROVED ADHESIVENESS - insures a coating on the gears at start-up. APPLICATIONS: In addition to parallel-shaft gearboxes, Medallion Food Machinery Gear Oils are appropriate for moderately loaded worm gear drives, oiled bearings, and couplings. For ISO 220 viscosity grade use 80W-90. For ISO 320 or 460 choose 85W-140.Size and Type Container: Pail Weight: 38 LBS.
MDLN FM GEAR OIL ISO 680 KOSH DRUM Food Grade Lubricants

Medallion Food Machinery Gear Oils are blended using a new generation base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of convention base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. Medallion Food Machinery Gear Oils also contain effective antiwear additives to protect metal surfaces and reduce downtime due to component failure. Medallion Food Machinery Gear Oils are NSF Registered for H-1 authorized and can be used in food plants where incidental contact with edible products may occur. Medallion FM Gear Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher and is considered Kosher-pareve for year-round use including Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in food processing facilities where incidental contact may occur. EXCELLENT DEMULSIBILITY - separates readily from water. REDUCES WEAR - protects against scoring, scuffing and galling to increase gear and bearing life. EXTENDED OIL LIFE - free of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. IMPROVED ADHESIVENESS - insures a coating on the gears at start-up. APPLICATIONS: In addition to parallel-shaft gearboxes, Medallion Food Machinery Gear Oils are appropriate for moderately loaded worm gear drives, oiled bearings, and couplings. For ISO 220 viscosity grade use 80W-90. For ISO 320 or 460 choose 85W-140.Size and Type Container: Drum Weight: 438 LBS.
MDLN FM GEAR OIL ISO 680 KOSH PAIL Food Grade Lubricants

Medallion Food Machinery Gear Oils are blended using a new generation base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of convention base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. Medallion Food Machinery Gear Oils also contain effective antiwear additives to protect metal surfaces and reduce downtime due to component failure. Medallion Food Machinery Gear Oils are NSF Registered for H-1 authorized and can be used in food plants where incidental contact with edible products may occur. Medallion FM Gear Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher and is considered Kosher-pareve for year-round use including Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in food processing facilities where incidental contact may occur. EXCELLENT DEMULSIBILITY - separates readily from water. REDUCES WEAR - protects against scoring, scuffing and galling to increase gear and bearing life. EXTENDED OIL LIFE - free of impurities including traces of sulfur, nitrogen, and inferior aromatic oils. IMPROVED ADHESIVENESS - insures a coating on the gears at start-up. APPLICATIONS: In addition to parallel-shaft gearboxes, Medallion Food Machinery Gear Oils are appropriate for moderately loaded worm gear drives, oiled bearings, and couplings. For ISO 220 viscosity grade use 80W-90. For ISO 320 or 460 choose 85W-140.Size and Type Container: Pail Weight: 38 LBS.
MDLN FM HYD OIL ISO 100 KOSHER 4-GALLON PAIL Food Grade Lubricants

Medallion Food Machinery Hydraulic Oils are blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of conventional base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. H-1 registration allows Medallion Food Machinery Hydraulic Oil to be used in areas where a nontoxic oil is required. It is recommended for high-pressure hydraulic systems, as well as bearing lubrication. Medallion Food Machinery Hydraulic Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas kosher-pareve, and is considered for yearround use including Passover. Medallion Food Machinery Hydraulic Oils meet DIN 51524 part 2. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. ANTIWEAR ADDITIVE - extends equipment life and minimizes downtime. EXCELLENT DEMULSIBILITY - separates easily from water. RUST AND CORROSION INHIBITED - protects metal surfaces against the effects of moisture and acids. EXTENDED OIL LIFE - free of impurities including sulfur, nitrogen and inferior aromatic oils. APPLICATIONS: Medallion Food Machinery Hydraulic Oils are recommended for hydraulic applications whenever there is the chance the lubricant may have incidental contact with edible products and need an H-1 rated lubricant. May also be used as a general lubricant when H-1 products are required. Also recommended for air line oilers and low pressure vacuum pumps. Size and Type Container: 4-Gallon Pail Weight: 32 LBS.
MDLN FM HYD OIL ISO 100 KOSHER 55-GALLON DRUM Food Grade Lubricants

Medallion Food Machinery Hydraulic Oils are blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of conventional base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. H-1 registration allows Medallion Food Machinery Hydraulic Oil to be used in areas where a nontoxic oil is required. It is recommended for high-pressure hydraulic systems, as well as bearing lubrication. Medallion Food Machinery Hydraulic Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas kosher-pareve, and is considered for yearround use including Passover. Medallion Food Machinery Hydraulic Oils meet DIN 51524 part 2. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. ANTIWEAR ADDITIVE - extends equipment life and minimizes downtime. EXCELLENT DEMULSIBILITY - separates easily from water. RUST AND CORROSION INHIBITED - protects metal surfaces against the effects of moisture and acids. EXTENDED OIL LIFE - free of impurities including sulfur, nitrogen and inferior aromatic oils. APPLICATIONS: Medallion Food Machinery Hydraulic Oils are recommended for hydraulic applications whenever there is the chance the lubricant may have incidental contact with edible products and need an H-1 rated lubricant. May also be used as a general lubricant when H-1 products are required. Also recommended for air line oilers and low pressure vacuum pumps. Size and Type Container: 55-Gallon Drum Weight: 439 LBS.
MDLN FM HYD OIL ISO 32 KOSHER 4-GALLON PAIL Food Grade Lubricants

Medallion Food Machinery Hydraulic Oils are blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of conventional base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. H-1 registration allows Medallion Food Machinery Hydraulic Oil to be used in areas where a nontoxic oil is required. It is recommended for high-pressure hydraulic systems, as well as bearing lubrication. Medallion Food Machinery Hydraulic Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas kosher-pareve, and is considered for yearround use including Passover. Medallion Food Machinery Hydraulic Oils meet DIN 51524 part 2. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. ANTIWEAR ADDITIVE - extends equipment life and minimizes downtime. EXCELLENT DEMULSIBILITY - separates easily from water. RUST AND CORROSION INHIBITED - protects metal surfaces against the effects of moisture and acids. EXTENDED OIL LIFE - free of impurities including sulfur, nitrogen and inferior aromatic oils. APPLICATIONS: Medallion Food Machinery Hydraulic Oils are recommended for hydraulic applications whenever there is the chance the lubricant may have incidental contact with edible products and need an H-1 rated lubricant. May also be used as a general lubricant when H-1 products are required. Also recommended for air line oilers and low pressure vacuum pumps. Size and Type Container: 4-Gallon Pail Weight: 32 LBS.
MDLN FM HYD OIL ISO 32 KOSHER 55-GALLON DRUM Food Grade Lubricants

Medallion Food Machinery Hydraulic Oils are blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of conventional base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. H-1 registration allows Medallion Food Machinery Hydraulic Oil to be used in areas where a nontoxic oil is required. It is recommended for high-pressure hydraulic systems, as well as bearing lubrication. Medallion Food Machinery Hydraulic Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas kosher-pareve, and is considered for yearround use including Passover. Medallion Food Machinery Hydraulic Oils meet DIN 51524 part 2. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. ANTIWEAR ADDITIVE - extends equipment life and minimizes downtime. EXCELLENT DEMULSIBILITY - separates easily from water. RUST AND CORROSION INHIBITED - protects metal surfaces against the effects of moisture and acids. EXTENDED OIL LIFE - free of impurities including sulfur, nitrogen and inferior aromatic oils. APPLICATIONS: Medallion Food Machinery Hydraulic Oils are recommended for hydraulic applications whenever there is the chance the lubricant may have incidental contact with edible products and need an H-1 rated lubricant. May also be used as a general lubricant when H-1 products are required. Also recommended for air line oilers and low pressure vacuum pumps. Size and Type Container: 55-Gallon Drum Weight: 433 LBS.
MDLN FM HYD OIL ISO 46 KOSHER 4-GALLON PAIL Food Grade Lubricants

Medallion Food Machinery Hydraulic Oils are blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of conventional base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. H-1 registration allows Medallion Food Machinery Hydraulic Oil to be used in areas where a nontoxic oil is required. It is recommended for high-pressure hydraulic systems, as well as bearing lubrication. Medallion Food Machinery Hydraulic Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas kosher-pareve, and is considered for yearround use including Passover. Medallion Food Machinery Hydraulic Oils meet DIN 51524 part 2. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. ANTIWEAR ADDITIVE - extends equipment life and minimizes downtime. EXCELLENT DEMULSIBILITY - separates easily from water. RUST AND CORROSION INHIBITED - protects metal surfaces against the effects of moisture and acids. EXTENDED OIL LIFE - free of impurities including sulfur, nitrogen and inferior aromatic oils. APPLICATIONS: Medallion Food Machinery Hydraulic Oils are recommended for hydraulic applications whenever there is the chance the lubricant may have incidental contact with edible products and need an H-1 rated lubricant. May also be used as a general lubricant when H-1 products are required. Also recommended for air line oilers and low pressure vacuum pumps. Size and Type Container: 4-Gallon Pail Weight: 32 LBS.
MDLN FM HYD OIL ISO 46 KOSHER 55-GALLON DRUM Food Grade Lubricants

Medallion Food Machinery Hydraulic Oils are blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of conventional base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. H-1 registration allows Medallion Food Machinery Hydraulic Oil to be used in areas where a nontoxic oil is required. It is recommended for high-pressure hydraulic systems, as well as bearing lubrication. Medallion Food Machinery Hydraulic Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas kosher-pareve, and is considered for yearround use including Passover. Medallion Food Machinery Hydraulic Oils meet DIN 51524 part 2. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. ANTIWEAR ADDITIVE - extends equipment life and minimizes downtime. EXCELLENT DEMULSIBILITY - separates easily from water. RUST AND CORROSION INHIBITED - protects metal surfaces against the effects of moisture and acids. EXTENDED OIL LIFE - free of impurities including sulfur, nitrogen and inferior aromatic oils. APPLICATIONS: Medallion Food Machinery Hydraulic Oils are recommended for hydraulic applications whenever there is the chance the lubricant may have incidental contact with edible products and need an H-1 rated lubricant. May also be used as a general lubricant when H-1 products are required. Also recommended for air line oilers and low pressure vacuum pumps. Size and Type Container: 55-Gallon Drum Weight: 434 LBS.
MDLN FM HYD OIL ISO 68 KOSHER 4-GALLON PAIL Food Grade Lubricants

Medallion Food Machinery Hydraulic Oils are blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of conventional base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. H-1 registration allows Medallion Food Machinery Hydraulic Oil to be used in areas where a nontoxic oil is required. It is recommended for high-pressure hydraulic systems, as well as bearing lubrication. Medallion Food Machinery Hydraulic Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas kosher-pareve, and is considered for yearround use including Passover. Medallion Food Machinery Hydraulic Oils meet DIN 51524 part 2. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. ANTIWEAR ADDITIVE - extends equipment life and minimizes downtime. EXCELLENT DEMULSIBILITY - separates easily from water. RUST AND CORROSION INHIBITED - protects metal surfaces against the effects of moisture and acids. EXTENDED OIL LIFE - free of impurities including sulfur, nitrogen and inferior aromatic oils. APPLICATIONS: Medallion Food Machinery Hydraulic Oils are recommended for hydraulic applications whenever there is the chance the lubricant may have incidental contact with edible products and need an H-1 rated lubricant. May also be used as a general lubricant when H-1 products are required. Also recommended for air line oilers and low pressure vacuum pumps. Size and Type Container: 4-Gallon Pail Weight: 32 LBS.
MDLN FM HYD OIL ISO 68 KOSHER 55-GALLON DRUM Food Grade Lubricants

Medallion Food Machinery Hydraulic Oils are blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. In laboratory tests, Whitmore’s Excelsior base oil shows a major reduction in evaporation loss. Oxidation stability exceeds that of conventional base oils by 60-100%. These performance improvements translate into reduced carbon and varnish deposits. The end result is longer oil and component life. H-1 registration allows Medallion Food Machinery Hydraulic Oil to be used in areas where a nontoxic oil is required. It is recommended for high-pressure hydraulic systems, as well as bearing lubrication. Medallion Food Machinery Hydraulic Oils are produced under the supervision of VA’AD HAKASHRUS of Dallas, Inc. doing business as Dallas kosher-pareve, and is considered for yearround use including Passover. Medallion Food Machinery Hydraulic Oils meet DIN 51524 part 2. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. ANTIWEAR ADDITIVE - extends equipment life and minimizes downtime. EXCELLENT DEMULSIBILITY - separates easily from water. RUST AND CORROSION INHIBITED - protects metal surfaces against the effects of moisture and acids. EXTENDED OIL LIFE - free of impurities including sulfur, nitrogen and inferior aromatic oils. APPLICATIONS: Medallion Food Machinery Hydraulic Oils are recommended for hydraulic applications whenever there is the chance the lubricant may have incidental contact with edible products and need an H-1 rated lubricant. May also be used as a general lubricant when H-1 products are required. Also recommended for air line oilers and low pressure vacuum pumps. Size and Type Container: 55-Gallon Drum Weight: 437 LBS.
MDLN GEN PURP GREASE 2 50 CT CS Food Grade Lubricants

Medallion FM Grease is a premium quality extreme pressure lubricant which provides excellent protection from wear under a wide range of conditions, including heavy load. It is registered with NSF as anH-1 grease. This makes it suitable for use in food processing plants where incidental contact with food is possible. Medallion FM Grease is highly water-resistant, minimizing loss of lubricant that sometimes occurs when machines are washed. Medallion FM Grease contains antiwear additives to protect metal surfaces from wear under conditions of metal-to-metal contact. Medallion FM Grease is adhesive (sticks to metal) and cohesive (sticks to itself). As a result it resists pounding out of bearings and bushings when shock loads are encountered. Medallion FM Grease is produced under the supervision of Dallas Kosher and is considered Kosher-Pareve for year-round use including during Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: RESISTS POUND-OUT - provides extra protection and reduces consumption. WATER RESISTANT - superior capability to stay in place even during frequent wash downs. WIDE TEMPERATURE OPERATING RANGE - can be used down to -25°F (-32°C) and up to 300°F (155°C) with daily regreasing. APPLICATIONS: Medallion FM Grease is very versatile and may be used to lubricate bearings, bushings, slides, rollers and cam followers. Medallion FM Grease can also be used as an antirust film and as a release agent for gaskets and seals. It is available in Grades 0, 1, and 2 and can be applied manually or automatically. Medallion FM Grease is able to withstand the effects of steam as well as harsh temperature extremes. NLGI Grades 1 and 2 are available in convenient cartridges for manual application. Size and Type Container: CS Weight: 50 LBS.
MDLN GEN PURP GREASE 2 KEG Food Grade Lubricants

Medallion FM Grease is a premium quality extreme pressure lubricant which provides excellent protection from wear under a wide range of conditions, including heavy load. It is registered with NSF as anH-1 grease. This makes it suitable for use in food processing plants where incidental contact with food is possible. Medallion FM Grease is highly water-resistant, minimizing loss of lubricant that sometimes occurs when machines are washed. Medallion FM Grease contains antiwear additives to protect metal surfaces from wear under conditions of metal-to-metal contact. Medallion FM Grease is adhesive (sticks to metal) and cohesive (sticks to itself). As a result it resists pounding out of bearings and bushings when shock loads are encountered. Medallion FM Grease is produced under the supervision of Dallas Kosher and is considered Kosher-Pareve for year-round use including during Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: RESISTS POUND-OUT - provides extra protection and reduces consumption. WATER RESISTANT - superior capability to stay in place even during frequent wash downs. WIDE TEMPERATURE OPERATING RANGE - can be used down to -25°F (-32°C) and up to 300°F (155°C) with daily regreasing. APPLICATIONS: Medallion FM Grease is very versatile and may be used to lubricate bearings, bushings, slides, rollers and cam followers. Medallion FM Grease can also be used as an antirust film and as a release agent for gaskets and seals. It is available in Grades 0, 1, and 2 and can be applied manually or automatically. Medallion FM Grease is able to withstand the effects of steam as well as harsh temperature extremes. NLGI Grades 1 and 2 are available in convenient cartridges for manual application. Size and Type Container: Keg Weight: 134 LBS.
MDLN GEN PURP GREASE 2 PAIL Food Grade Lubricants

Medallion FM Grease is a premium quality extreme pressure lubricant which provides excellent protection from wear under a wide range of conditions, including heavy load. It is registered with NSF as anH-1 grease. This makes it suitable for use in food processing plants where incidental contact with food is possible. Medallion FM Grease is highly water-resistant, minimizing loss of lubricant that sometimes occurs when machines are washed. Medallion FM Grease contains antiwear additives to protect metal surfaces from wear under conditions of metal-to-metal contact. Medallion FM Grease is adhesive (sticks to metal) and cohesive (sticks to itself). As a result it resists pounding out of bearings and bushings when shock loads are encountered. Medallion FM Grease is produced under the supervision of Dallas Kosher and is considered Kosher-Pareve for year-round use including during Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: RESISTS POUND-OUT - provides extra protection and reduces consumption. WATER RESISTANT - superior capability to stay in place even during frequent wash downs. WIDE TEMPERATURE OPERATING RANGE - can be used down to -25°F (-32°C) and up to 300°F (155°C) with daily regreasing. APPLICATIONS: Medallion FM Grease is very versatile and may be used to lubricate bearings, bushings, slides, rollers and cam followers. Medallion FM Grease can also be used as an antirust film and as a release agent for gaskets and seals. It is available in Grades 0, 1, and 2 and can be applied manually or automatically. Medallion FM Grease is able to withstand the effects of steam as well as harsh temperature extremes. NLGI Grades 1 and 2 are available in convenient cartridges for manual application. Size and Type Container: Pail Weight: 38 LBS.
MDLN HI TEMP GREASE CS Food Grade Lubricants

Medallion FM Grease is a premium quality extreme pressure lubricant which provides excellent protection from wear under a wide range of conditions, including heavy load. It is registered with NSF as anH-1 grease. This makes it suitable for use in food processing plants where incidental contact with food is possible. Medallion FM Grease is highly water-resistant, minimizing loss of lubricant that sometimes occurs when machines are washed. Medallion FM Grease contains antiwear additives to protect metal surfaces from wear under conditions of metal-to-metal contact. Medallion FM Grease is adhesive (sticks to metal) and cohesive (sticks to itself). As a result it resists pounding out of bearings and bushings when shock loads are encountered. Medallion FM Grease is produced under the supervision of Dallas Kosher and is considered Kosher-Pareve for year-round use including during Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: RESISTS POUND-OUT - provides extra protection and reduces consumption. WATER RESISTANT - superior capability to stay in place even during frequent wash downs. WIDE TEMPERATURE OPERATING RANGE - can be used down to -25°F (-32°C) and up to 300°F (155°C) with daily regreasing. APPLICATIONS: Medallion FM Grease is very versatile and may be used to lubricate bearings, bushings, slides, rollers and cam followers. Medallion FM Grease can also be used as an antirust film and as a release agent for gaskets and seals. It is available in Grades 0, 1, and 2 and can be applied manually or automatically. Medallion FM Grease is able to withstand the effects of steam as well as harsh temperature extremes. NLGI Grades 1 and 2 are available in convenient cartridges for manual application. Size and Type Container: CS Weight: 50 LBS.
MDLN HI TEMP GREASE PAIL Food Grade Lubricants

Medallion FM Grease is a premium quality extreme pressure lubricant which provides excellent protection from wear under a wide range of conditions, including heavy load. It is registered with NSF as anH-1 grease. This makes it suitable for use in food processing plants where incidental contact with food is possible. Medallion FM Grease is highly water-resistant, minimizing loss of lubricant that sometimes occurs when machines are washed. Medallion FM Grease contains antiwear additives to protect metal surfaces from wear under conditions of metal-to-metal contact. Medallion FM Grease is adhesive (sticks to metal) and cohesive (sticks to itself). As a result it resists pounding out of bearings and bushings when shock loads are encountered. Medallion FM Grease is produced under the supervision of Dallas Kosher and is considered Kosher-Pareve for year-round use including during Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: RESISTS POUND-OUT - provides extra protection and reduces consumption. WATER RESISTANT - superior capability to stay in place even during frequent wash downs. WIDE TEMPERATURE OPERATING RANGE - can be used down to -25°F (-32°C) and up to 300°F (155°C) with daily regreasing. APPLICATIONS: Medallion FM Grease is very versatile and may be used to lubricate bearings, bushings, slides, rollers and cam followers. Medallion FM Grease can also be used as an antirust film and as a release agent for gaskets and seals. It is available in Grades 0, 1, and 2 and can be applied manually or automatically. Medallion FM Grease is able to withstand the effects of steam as well as harsh temperature extremes. NLGI Grades 1 and 2 are available in convenient cartridges for manual application. Size and Type Container: Pail Weight: 38 LBS.
MDLN PENETRATING CHAIN OIL 4-GALLON PAIL Food Grade Lubricants

Medallion Penetrating Chain Oil is blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. Medallion Penetrating Chain Oil can be used as a light sanitary lubricant, penetrating oil or antirust film on equipment and machine parts where there is exposure of the lubricated part to edible products. Medallion Penetrating Chain Oil acts quickly to free rusted or corroded fasteners. It facilitates easy operation of air-actuated pins and guides. In addition, Medallion Penetrating Chain Oil serves as an excellent antirust film on equipment during idle periods. Medallion Penetrating Chain Oil is produced under the supervision of VA'AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher, and is considered kosher-pareve for year-round use including during Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. CONVENIENT - available in aerosol and non-aerosol spray. FAST ACTING - quickly frees "frozen" parts. DISPLACES MOISTURE - guards against rust and corrosion. LUBRICATES - excellent product for a wide variety of lubrication needs, especially wire ropes and chains. APPLICATIONS: Medallion Penetrating Chain Oil is a multipurpose, H-1 rated, light lubricating oil. It is particularly effective as a penetrating oil in the food processing industry. Ideal for use on conveyor chains operating at temperatures from -40°F (-40°C) to 180°F (80°C). If applying to a chain in a deep freeze condition, keep the oil in a warm environment prior to application. Size and Type Container: 4-Gallon Pail Weight: 32 LBS.
MDLN PENETRATING CHAIN OIL 55-GALLON DRUM Food Grade Lubricants

Medallion Penetrating Chain Oil is blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. Medallion Penetrating Chain Oil can be used as a light sanitary lubricant, penetrating oil or antirust film on equipment and machine parts where there is exposure of the lubricated part to edible products. Medallion Penetrating Chain Oil acts quickly to free rusted or corroded fasteners. It facilitates easy operation of air-actuated pins and guides. In addition, Medallion Penetrating Chain Oil serves as an excellent antirust film on equipment during idle periods. Medallion Penetrating Chain Oil is produced under the supervision of VA'AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher, and is considered kosher-pareve for year-round use including during Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. CONVENIENT - available in aerosol and non-aerosol spray. FAST ACTING - quickly frees "frozen" parts. DISPLACES MOISTURE - guards against rust and corrosion. LUBRICATES - excellent product for a wide variety of lubrication needs, especially wire ropes and chains. APPLICATIONS: Medallion Penetrating Chain Oil is a multipurpose, H-1 rated, light lubricating oil. It is particularly effective as a penetrating oil in the food processing industry. Ideal for use on conveyor chains operating at temperatures from -40°F (-40°C) to 180°F (80°C). If applying to a chain in a deep freeze condition, keep the oil in a warm environment prior to application. Size and Type Container: 55-Gallon Drum Weight: 431 LBS.
MDLN PENETRATING NON-AEROSOL

Medallion Penetrating Chain Oil is blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. Medallion Penetrating Chain Oil can be used as a light sanitary lubricant, penetrating oil or antirust film on equipment and machine parts where there is exposure of the lubricated part to edible products. Medallion Penetrating Chain Oil acts quickly to free rusted or corroded fasteners. It facilitates easy operation of air-actuated pins and guides. In addition, Medallion Penetrating Chain Oil serves as an excellent antirust film on equipment during idle periods. Medallion Penetrating Chain Oil is produced under the supervision of VA'AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher, and is considered kosher-pareve for year-round use including during Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. CONVENIENT - available in aerosol and non-aerosol spray. FAST ACTING - quickly frees "frozen" parts. DISPLACES MOISTURE - guards against rust and corrosion. LUBRICATES - excellent product for a wide variety of lubrication needs, especially wire ropes and chains. APPLICATIONS: Medallion Penetrating Chain Oil is a multipurpose, H-1 rated, light lubricating oil. It is particularly effective as a penetrating oil in the food processing industry. Ideal for use on conveyor chains operating at temperatures from -40°F (-40°C) to 180°F (80°C). If applying to a chain in a deep freeze condition, keep the oil in a warm environment prior to application.Size and Type Container: CS Weight: 13 LBS
MDLN PENETRATING OIL AEROSOL CS Food Grade Lubricants

Medallion Penetrating Chain Oil is blended using a food grade base oil called Excelsior. Most base oils used in industrial lubricants are yellow or amber in color. This “discoloration” is caused by a variety of impurities including traces of sulfur, nitrogen and inferior aromatic oils. Nitrogen promotes oxidation and deposit formation. Aromatics have poor oxidation stability. Excelsior base oils are colorless and free of these materials. Excelsior oil is ideal for use in applications involving food machinery. Medallion Penetrating Chain Oil can be used as a light sanitary lubricant, penetrating oil or antirust film on equipment and machine parts where there is exposure of the lubricated part to edible products. Medallion Penetrating Chain Oil acts quickly to free rusted or corroded fasteners. It facilitates easy operation of air-actuated pins and guides. In addition, Medallion Penetrating Chain Oil serves as an excellent antirust film on equipment during idle periods. Medallion Penetrating Chain Oil is produced under the supervision of VA'AD HAKASHRUS of Dallas, Inc. doing business as Dallas Kosher, and is considered kosher-pareve for year-round use including during Passover. Contains an NSF-approved preservative that limits the growth of bacteria. BENEFITS: H-1 RATED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. CONVENIENT - available in aerosol and non-aerosol spray. FAST ACTING - quickly frees "frozen" parts. DISPLACES MOISTURE - guards against rust and corrosion. LUBRICATES - excellent product for a wide variety of lubrication needs, especially wire ropes and chains. APPLICATIONS: Medallion Penetrating Chain Oil is a multipurpose, H-1 rated, light lubricating oil. It is particularly effective as a penetrating oil in the food processing industry. Ideal for use on conveyor chains operating at temperatures from -40°F (-40°C) to 180°F (80°C). If applying to a chain in a deep freeze condition, keep the oil in a warm environment prior to application. Size and Type Container: CS Weight: 15 LBS.
MDLN SYNTHETIC COMP ISO 100 5-GALLON PAIL Food Grade Lubricants

Medallion Synthetic Air Compressor Oils are formulated using the finest PAO (polyalphaolefin) base stocks available. Medallion Synthetic Air Compressor Oils impart excellent resistance to oxidation demanded by the sophisticated air systems manufactured today. Medallion Synthetic Air Compressor Oils provide outstanding high temperature stability, longer drain intervals, and clean operation of equipment. Also suitable for use in a wide variety of applications where a H-1 rated product is required. This includes wire ropes, slideways, and chains. Capable of sustaining a maximum continuous operating temperature of approximately 400°F (200°C). BENEFITS: H-1 REGISTERED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. REDUCED MAINTENANCE COSTS - eliminates harmful varnish and sludge deposits, reducing downtime. REDUCED CONSUMPTION - low volatility, superior oxidation resistance and shear resistance results in reduced vapor loss. ENERGY SAVINGS - lower coefficient of friction and higher thermal stability reduce friction and result in reduced power consumption. OPERATING SAFETY - flash point and auto-ignition temperature are much higher than conventional petroleum products. This lowers the risk of fire and explosions sometimes caused by high carbon deposits and excess lubricant carry-over. APPLICATIONS: Medallion Synthetic Air Compressor Oils are acceptable for use in rotary screw, centrifugal and reciprocating compressors. Suitable for use on conveyor chains and other open lubrication points operating at high temperatures. Size and Type Container: 5-Gallon Pail Weight: 38 LBS.
MDLN SYNTHETIC COMP ISO 100 55-GALLON DRUM Food Grade Lubricants

Medallion Synthetic Air Compressor Oils are formulated using the finest PAO (polyalphaolefin) base stocks available. Medallion Synthetic Air Compressor Oils impart excellent resistance to oxidation demanded by the sophisticated air systems manufactured today. Medallion Synthetic Air Compressor Oils provide outstanding high temperature stability, longer drain intervals, and clean operation of equipment. Also suitable for use in a wide variety of applications where a H-1 rated product is required. This includes wire ropes, slideways, and chains. Capable of sustaining a maximum continuous operating temperature of approximately 400°F (200°C). BENEFITS: H-1 REGISTERED - for use in federally inspected meat and poultry plants, as well as beverage and other food processing facilities where incidental food contact may occur. REDUCED MAINTENANCE COSTS - eliminates harmful varnish and sludge deposits, reducing downtime. REDUCED CONSUMPTION - low volatility, superior oxidation resistance and shear resistance results in reduced vapor loss. ENERGY SAVINGS - lower coefficient of friction and higher thermal stability reduce friction and result in reduced power consumption. OPERATING SAFETY - flash point and auto-ignition temperature are much higher than conventional petroleum products. This lowers the risk of fire and explosions sometimes caused by high carbon deposits and excess lubricant carry-over. APPLICATIONS: Medallion Synthetic Air Compressor Oils are acceptable for use in rotary screw, centrifugal and reciprocating compressors. Suitable for use on conveyor chains and other open lubrication points operating at high temperatures. Size and Type Container: 55-Gallon Drum Weight: 423 LBS.

MATRIX EP 2 w/Liner Pail Greases

MATRIX LC 1 Drum Greases

MATRIX LC 1 Keg Greases

MATRIX LC 1 Liner Keg Greases

MATRIX LC 2 50 CT CARTRIDGES Greases

MATRIX LC 2 Drum Greases

MATRIX LC 2 Liner Keg Greases

MATRIX LC 2 Pail Greases

Matrix M EP 1 Greases

Matrix M EP 2 Greases

MATRIX TK EP 2 50 CT CART Greases

MATRIX TK EP 2 Drum Greases

MATRIX TK EP 2 Liner Pail Greases

MATRIX TK EP 2 Pail Greases

MATRIX TK EP 2 w/LINER Drum Greases

MATRIX TK EP 2 w/Liner Keg Greases

MDLN FM GEAR OIL 80W90 DRUM Food Grade Lubricants

MDLN FM GEAR OIL 80W90 KEG Food Grade Lubricants

MDLN FM GEAR OIL 80W90 PAIL Food Grade Lubricants

MDLN FM GEAR OIL 85W140 DRUM Food Grade Lubricants

MDLN FM GEAR OIL 85W140 PAIL Food Grade Lubricants

MDLN FM GEAR OIL 85W140 TOTE Food Grade Lubricants

MDLN FM GEAR OIL ISO 1000 KOSH DRUM Food Grade Lubricants

MDLN FM GEAR OIL ISO 1000 KOSH PAIL Food Grade Lubricants

MDLN FM GEAR OIL ISO 680 KOSH DRUM Food Grade Lubricants

MDLN FM GEAR OIL ISO 680 KOSH PAIL Food Grade Lubricants

MDLN FM HYD OIL ISO 100 KOSHER 4-GALLON PAIL Food Grade Lubricants

MDLN FM HYD OIL ISO 100 KOSHER 55-GALLON DRUM Food Grade Lubricants

MDLN FM HYD OIL ISO 32 KOSHER 4-GALLON PAIL Food Grade Lubricants

MDLN FM HYD OIL ISO 32 KOSHER 55-GALLON DRUM Food Grade Lubricants

MDLN FM HYD OIL ISO 46 KOSHER 4-GALLON PAIL Food Grade Lubricants

MDLN FM HYD OIL ISO 46 KOSHER 55-GALLON DRUM Food Grade Lubricants

MDLN FM HYD OIL ISO 68 KOSHER 4-GALLON PAIL Food Grade Lubricants

MDLN FM HYD OIL ISO 68 KOSHER 55-GALLON DRUM Food Grade Lubricants

MDLN GEN PURP GREASE 2 50 CT CS Food Grade Lubricants

MDLN GEN PURP GREASE 2 KEG Food Grade Lubricants

MDLN GEN PURP GREASE 2 PAIL Food Grade Lubricants

MDLN HI TEMP GREASE CS Food Grade Lubricants

MDLN HI TEMP GREASE PAIL Food Grade Lubricants

MDLN PENETRATING CHAIN OIL 4-GALLON PAIL Food Grade Lubricants

MDLN PENETRATING CHAIN OIL 55-GALLON DRUM Food Grade Lubricants

MDLN PENETRATING NON-AEROSOL

MDLN PENETRATING OIL AEROSOL CS Food Grade Lubricants

MDLN SYNTHETIC COMP ISO 100 5-GALLON PAIL Food Grade Lubricants

MDLN SYNTHETIC COMP ISO 100 55-GALLON DRUM Food Grade Lubricants