MULTIPLUS 85W-140 Drum Enclosed Gear Oils
$2,420.75
Bulk Orders
Whitmore’s Multiplus Enclosed Gear Oils are extreme pressure lubricants formulated to meet the exacting demands of most types of automotive differentials and transmissions including heavy-duty off-road fleets.
Multiplus is designed to perform under adverse conditions such as: heavily loaded gears, shock loading, and frequent reversing action. All Multiplus products meet the performance requirements of extreme pressure lubricants of the American Gear Manufacturer’s Association (AGMA) Specification 9005-D94 “Lubrication of Industrial Enclosed Gearing.”
Multiplus lubricants meet or exceed the following specifications for the respective viscosity grades:
U.S. Steel Spec 224 – Rockwell D-76 (A,B,C,D,F)
GL-4 & GL-5 GM Spec 9985044
MIL-L-2105E – GM Spec 9985182
John Deere J11D – Chrysler MS 9020
Navistar (IHC) Grades 81 HR, 90HR, 135 HEP – CS 3000 B
Ford EST-M2C-108-C – MT-1
Mack GO-J
BENEFITS:
- REDUCES WEAR – protects against scoring, scuffing and galling to increase gear and bearing life.
- VERSATILE – may be used in a variety of equipment and mixed fleets. Reduces inventory.
- ANTIFOAM – protects seals and keeps operating temperatures low by breaking up entrapped air bubbles as they form.
- RAPID DEMULSIFICATION – separates easily from water. Multiplus does not lose lubricity due to emulsified water.
APPLICATIONS:
Multiplus is designed primarily for automotive differentials and transmissions. Multiplus may be used in severe service over-theroad and off-road applications. It may also be used in industrial gearboxes, oiled bearings, and couplings. Suitable for service-fill on equipment requiring a lubricant with Limited Slip characteristics
Size and Type Container: Drum
Weight: 448 LBS.
Additional information
| Weight | 448 lbs |
|---|
Related products
-
JET-LUBE 21 – ARCTIC Double Duty Drill Collar & Tool Joint Compound
$100.54Oilfield Drill Collar & Tool Joint Compound ARCTIC Double-duty drill collar and tool joint compound by Jet-Lube, free of lead and zinc and formulated to provide a high level of performance for the increasing demands of today’s oilfield market. 21® Arctic's lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21's arctic grade is for improved low temperature applicability and spray systems. Benefits of using 21® Arctic (Oilfield) Pumpable & brushable Lead & zinc-free Rust & corrosion inhibitors Specifications Base Materials: Soap / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G) Certifications: Not classified as a marine pollutant - DOT Approval CA2006100003 -
#202 MOLY-LITH 400 lb Drum
$4,055.02JET-LUBE #202 MOLY-LITH has exceptional resistance to the effects of heat, water, weathering, oxidation and heavy loads. It contains rust, corrosion and oxidation inhibitors. #202 MOLY-LITH provides unexcelled protection wherever dirt, dust, high humidity, rain and adverse temperatures are problems; highly adhesive, pumpable and stable. BENEFITS: Has a dropping point of >390°F Excellent work stability under high loads, shock, and vibration Water resistant Fortified with rust and corrosion inhibitors High strength fluid film High lithium soap content >10% High moly content >8% Pumpable formula Temkin load – 60 lbs. Designed for: Excellent for rack/pinion grease cups, drive shaft idler arm and ball joints. Specifically formulated to protect your equipment from premature damages that can occur from dirt, dust, and sediments. The high soap content builds a shield between the bearing surfaces and the external elements. Contains micro-fine Molybdenum Disulfide (MoS2) particles to further enhance load carrying and low friction characteristics. Applications Automotive and industrial applications, including all grease fittings where semi-solid or plastic consistency grease is normally used. Reapplication according to owner’s manual to maintain excellent equipment functionality. Not Recommended for Oxygen Service Service Rating: 0°F to 300°F -18°C to 150°C -
JET-LUBE NCS 30 DPC 3.5 Gal
$291.19Oilfield Nonmetallic Thread Compound Jet-Lube NCS-30 Oilfield 3.5 Gal Pail is a premium quality, nonmetallic compound containing carbon based fibers and additives, and other natural extreme pressure and anti-wear additives. These are blended into Jet-Lube's high temp calcium complex base grease. This base grease offers the additional advantage of superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. It's especially effective for invert or high-pH muds. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits of using NCS-30® Non-conductive for MWD drilling applications High temp grease Resistance to high pH drilling fluids / muds Non-metallic Specifications: Base Materials: Calcium Complex / Petroleum Friction / K-Factor: 1.15 drill strings (Relative to API RP 7G) Certifications: NSF H2 Registered, Conforms to the API RP7G torque charts Service Rating: -20°F to 500°F, -29°C to 260°C TDS SDS -
KOL’R-KING 1 Gallon PAIL
$70.18This product is available in another size. Learn more here: KOL’R KING Drill Collar Compound contains 60% pure metallic lead, rust and corrosion inhibitors, plus special proprietary binders to reduce lead buildup and minimize the need for wire brushing on breakout. The premium quality metallic lead in KOL’R KING meets or exceeds the lead specifications listed in the First Appendix of API Recommended Practice 5A3. Applications KOL’R KING Drill Collar Compound is designed to provide maximum protection of drill collar threads and shoulders over a wide variety of conditions. The premium quality metallic lead forms a gasket-like shield on threads and shoulders and acts as a cushion, preventing direct metal-to-metal contact, and protects against damage from galling or seizure caused by extreme shock loads on drill collars. The high volume of solids also allows KOL’R KING to be used as a pipe thread sealant and as an anti-seize thread compound. Should not be used where the use of products containing Lead is prohibited.