Whitmore

Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed. Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing.Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN. Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). BENEFITS: LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slow moving bearings and bushings. APPLICATIONS:Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications. Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others. High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders. Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearingsSize and Type Container: Keg Weight: 134 LBS.

Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed. Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing. Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN. Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). BENEFITS: LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slow moving bearings and bushings. APPLICATIONS: Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications. Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others. High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders. Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearings Size and Type Container: Pail Weight: 38 LBS. Featured in our podcast Hear how this product solves real-world reliability problems in our episode Whitmore Industrial Grease Selection Guide: How to Match EP Grease to Mining and Heavy-Duty Applications. Or listen on RSS.com.

Matrix LC is a heavy-duty addition to the Whitmore line of extreme pressure greases. This grease answers demands for a calcium sulfonate complex grease that is pumpable in cold weather and is suitable for higher speed bearings. When formulating Matrix LC, Whitmore chemists started with Matrix EP, which has been our flagship grease for several years. Several changes were made, including the use of a new polymer. All of the most notable benefits of Matrix EP were retained in Matrix LC including long life and outstanding wear protection. Needless to say, the rust protection afforded by the calcium sulfonate thickener remains. For high water wash and underwater applications choose Matrix EP. Matrix LC can be made available in two additional grades not listed below: Matrix 5M LC 2 (with 5% MoS2) and Matrix LC 1.5. BENEFITS: LONG LIFE - reduced re-lubrication frequency. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slower-moving bearings and bushings. WEAR PROTECTION – suitable for use in very heavily loaded bearings. APPLICATIONS: Besides electric motor bearings, Matrix LC is recommended for use in applications where re-lubrication is infrequent. This grease is suitable for highly loaded applications such as steel mill roll stands and slew ring bearings on hydraulic shovels. Matrix LC is recommended for single-point and centralized lubrication systems such as Lincoln, Graco, Farval, Vogel, etc. Size and Type Container: Keg Weight: 134 LBS.

Matrix LC is a heavy-duty addition to the Whitmore line of extreme pressure greases. This grease answers demands for a calcium sulfonate complex grease that is pumpable in cold weather and is suitable for higher speed bearings. When formulating Matrix LC, Whitmore chemists started with Matrix EP, which has been our flagship grease for several years. Several changes were made, including the use of a new polymer. All of the most notable benefits of Matrix EP were retained in Matrix LC including long life and outstanding wear protection. Needless to say, the rust protection afforded by the calcium sulfonate thickener remains. For high water wash and underwater applications choose Matrix EP. Matrix LC can be made available in two additional grades not listed below: Matrix 5M LC 2 (with 5% MoS2) and Matrix LC 1.5. BENEFITS: LONG LIFE - reduced re-lubrication frequency. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slower-moving bearings and bushings. WEAR PROTECTION – suitable for use in very heavily loaded bearings. APPLICATIONS: Besides electric motor bearings, Matrix LC is recommended for use in applications where re-lubrication is infrequent. This grease is suitable for highly loaded applications such as steel mill roll stands and slew ring bearings on hydraulic shovels. Matrix LC is recommended for single-point and centralized lubrication systems such as Lincoln, Graco, Farval, Vogel, etc. Size and Type Container: Keg Weight: 134 LBS.

Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed. Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing. Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN. Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). BENEFITS: LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slow moving bearings and bushings. APPLICATIONS: Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications. Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others. High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders. Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearings.Size and Type Container: Pail Weight: 38 LBS.

Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack. The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed. Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes. A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing. Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN. Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711). BENEFITS: LONG LIFE - reduced relubrication frequency. WATER RESISTANT - seals out water, even in underwater applications. WIDE SPEED RANGE - recommended for use in electric motor bearings as well as slow moving bearings and bushings. APPLICATIONS: Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications. Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others. High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders. Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearings.Size and Type Container: Keg Weight: 134 LBS.