Jet-Lube
Showing 361–405 of 626 results
-
Sale!
50350 – Jet-Lube White Lithium Grease 14 oz Cartridge
Price range: $14.17 through $424.98All-Purpose Grease w/ PTFE - H2 Jet-Lube WHITE LITHIUM is a premium all-purpose grease that provides superior performance and protection. WHITE LITHIUM GREASE with PTFE penetrates and forms a long lasting protective film that will withstand heavy loads and will not run or wash away. Benefits of using White Lithium Has a dropping point of >425°F Highly water-resistant Rust & corrosion inhibitors Pumpable High strength fluid film High lithium soap content >10% Pumpable Fortified with PTFE anti-wear additives Timken load - 45 lbs. Specifications of 50350 WHITE LITHIUM Base Materials: Lithium / Petroleum Oils Certifications: CFIA listed, NSF Registered H2 Bulk - Reg. #137549 Aerosol - Reg. #137550 Service Rating: 0°F to 370°F, -18°C to 190°C TDS (Aerosol) TDS SDS -
Sale!
50641 – Jet-Lube Food Grade Silicone 12 oz Aerosol
Price range: $14.50 through $173.99Food Grade Lubricant - NSF H1 JET-LUBE FOOD GRADE SILICONE is an excellent lubricant for use on processing equipment in all types of food and food-related industries where incidental food contact may occur. FOOD GRADE SILICONE stops sticking, squeaking, and binding of moving parts. It's an excellent release agent and will not gum, melt, freeze, become rancid, or form unwanted residues. FOOD GRADE SILICONE leaves a clear film that is moisture resistant, long-wearing, odorless, colorless, non-toxic, and non-staining. Flammable by Flame Extension Test. Benefits of using Food Grade Silicone Non-toxic Safe on plastics Non-staining Colorless & Odorless Excellent release agent Contains no 1:1:1 Trichloroethane, Freon TF or SARA Listed Ingredients Specifications of 50641 FOOD GRADE SILICONE Base Materials: Petroleum Distillates / Fluid White Oils Certifications: NSF H1 Registered #137548, FDA Regulation CFR-21, Part 178.3570 Incidental Food Contact, Authorized for use by Agriculture Canada Service Rating: 0°F to 350°F, -17°C to 177°C TDS SDS -
Sale!
52029 – Jet-Lube Rubber Lubricant 425 lb Drum
Original price was: $4,350.78.$3,915.70Current price is: $3,915.70.Water-Based Mold Release Agent JET-LUBE RUBBER LUBRICANT is a water-based, multipurpose, environmentally safe silicone product that contains twice the silicone content of leading aerosols for increased protection. RUBBER LUBRICANT makes assembly of plastic and rubber parts fast and easy. Whether squirted, sprayed, or brushed on, RUBBER LUBRICANT provides a temporary, wet, slippery surface, and then either dries to a thin protective film, or is absorbed into natural or synthetic rubber. As a "Mold Release Agent", the larger silicone content and higher silicone viscosity provides maximum release capacity under even the most severe molding conditions. Benefits of using Rubber Lubricant™ Water-based High silicone >15% Chemically inert Easy to apply Environmentally safe Excellent lubricity Excellent release properties Low coefficient of friction Non-flammable Will not melt or gum Non-toxic Low foaming Odorless Heat stable Non-staining Non-flammable Ozone-friendly Specifications of 52029 RUBBER LUBRICANT™ Base Materials: Silicone TDS SDS -
Sale!
52033 – Jet-Lube Rubber Lubricant 1 gal Jug
Price range: $91.21 through $364.82Water-Based Mold Release Agent JET-LUBE RUBBER LUBRICANT is a water-based, multipurpose, environmentally safe silicone product that contains twice the silicone content of leading aerosols for increased protection. RUBBER LUBRICANT makes assembly of plastic and rubber parts fast and easy. Whether squirted, sprayed, or brushed on, RUBBER LUBRICANT provides a temporary, wet, slippery surface, and then either dries to a thin protective film, or is absorbed into natural or synthetic rubber. As a "Mold Release Agent", the larger silicone content and higher silicone viscosity provides maximum release capacity under even the most severe molding conditions. Benefits of using Rubber Lubricant™ Water-based High silicone >15% Chemically inert Easy to apply Environmentally safe Excellent lubricity Excellent release properties Low coefficient of friction Non-flammable Will not melt or gum Non-toxic Low foaming Odorless Heat stable Non-staining Non-flammable Ozone-friendly Specifications of 52033 RUBBER LUBRICANT™ Base Materials: Silicone TDS SDS -
Sale!
52035 – Jet-Lube Rubber Lubricant 41.5 lb Pail
Original price was: $438.34.$394.51Current price is: $394.51.Water-Based Mold Release Agent JET-LUBE RUBBER LUBRICANT is a water-based, multipurpose, environmentally safe silicone product that contains twice the silicone content of leading aerosols for increased protection. RUBBER LUBRICANT makes assembly of plastic and rubber parts fast and easy. Whether squirted, sprayed, or brushed on, RUBBER LUBRICANT provides a temporary, wet, slippery surface, and then either dries to a thin protective film, or is absorbed into natural or synthetic rubber. As a "Mold Release Agent", the larger silicone content and higher silicone viscosity provides maximum release capacity under even the most severe molding conditions. Benefits of using Rubber Lubricant™ Water-based High silicone >15% Chemically inert Easy to apply Environmentally safe Excellent lubricity Excellent release properties Low coefficient of friction Non-flammable Will not melt or gum Non-toxic Low foaming Odorless Heat stable Non-staining Non-flammable Ozone-friendly Specifications of 52035 RUBBER LUBRICANT™ Base Materials: Silicone TDS SDS -
52043 – Jet-Lube Rubber Lubricant 1 lb Trigger Sprayer
Water-Based Mold Release Agent RUBBER LUBRICANT 16 OZ. TRIGGER SPRAY is a water-based, multipurpose, environmentally safe silicone product that contains twice the silicone content of leading aerosols for increased protection. RUBBER LUBRICANT makes assembly of plastic and rubber parts fast and easy. Whether squirted, sprayed, or brushed on, RUBBER LUBRICANT provides a temporary, wet, slippery surface, and then either dries to a thin protective film, or is absorbed into natural or synthetic rubber. As a "Mold Release Agent", the larger silicone content and higher silicone viscosity provides maximum release capacity under even the most severe molding conditions. Benefits of using Rubber Lubricant™ Water-based High silicone >15% Chemically inert Easy to apply Environmentally safe Excellent lubricity Excellent release properties Low coefficient of friction Non-flammable Will not melt or gum Non-toxic Low foaming Odorless Heat stable Non-staining Non-flammable Ozone-friendly Specifications of 52043 RUBBER LUBRICANT™ Base Materials: Silicone TDS SDS -
Sale!
52529 – Jet-Lube Ems 425 lb Drum
Original price was: $4,726.22.$4,253.60Current price is: $4,253.60.Water-Based Silicone Lubricant Jet-Lube EMS is an emulsified, multipurpose lubricant that lubricates, waterproofs and protects while being odorless, tasteless and Non-staining. EMS stops sticking, squeaking and binding of moving parts. It is an excellent release agent and ideal clear, clean lubricant. Benefits of using EMS™ Non-toxic No VOC's Non-staining Odorless Non-flammable Low Foaming Environmentally safe Specifications of 52529 EMS™ Base Materials: Silicone TDS SDS -
Sale!
52533 – Jet-Lube Ems 8.3 lb Jug
Price range: $112.77 through $451.08Water-Based Silicone Lubricant Jet-Lube EMS is an emulsified, multipurpose lubricant that lubricates, waterproofs and protects while being odorless, tasteless and Non-staining. EMS stops sticking, squeaking and binding of moving parts. It is an excellent release agent and ideal clear, clean lubricant. Benefits of using EMS™ Non-toxic No VOC's Non-staining Odorless Non-flammable Low Foaming Environmentally safe Specifications of 52533 EMS™ Base Materials: Silicone TDS SDS -
Sale!
52535 – Jet-Lube Ems 41.5 lb Pail
Original price was: $491.30.$442.17Current price is: $442.17.Water-Based Silicone Lubricant EMS 5 GAL. JUG is an emulsified, multipurpose lubricant that lubricates, waterproofs and protects while being odorless, tasteless and Non-staining. EMS stops sticking, squeaking and binding of moving parts. It is an excellent release agent and ideal clear, clean lubricant. Benefits of using EMS™ Non-toxic No VOC's Non-staining Odorless Non-flammable Low Foaming Environmentally safe Specifications: Base Materials: Silicone TDS SDS -
Sale!
52543 – Jet-Lube Ems 1 lb Trigger Sprayer
Price range: $27.59 through $331.13Water-Based Silicone Lubricant Jet-Lube EMS is an emulsified, multipurpose lubricant that lubricates, waterproofs and protects while being odorless, tasteless and Non-staining. EMS stops sticking, squeaking and binding of moving parts. It is an excellent release agent and ideal clear, clean lubricant. Benefits of using EMS™ Non-toxic No VOC's Non-staining Odorless Non-flammable Low Foaming Environmentally safe Specifications of 52543 EMS™ Base Materials: Silicone TDS SDS -
Sale!
55160 – JET-LUBE JET-LOK TL-42 fish bowl
Original price was: $1.03.$0.93Current price is: $0.93.Removable Threadlocker JET-LUBE JET-LOK TL-42 is the most widely used threadlocker for medium-strength, general purpose use. JET-LOK TL-42 will hold all metric and imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. Benefits of using Jet-Lok® TL-42 Removable Does not run off or drip Replaces lock washers Controlled torque tension Thixotropic Typical breakaway strength: 100-200 in-lb Typical prevailing strength: 30-60 in-lb Specifications of 55160 JET-LUBE JET-LOK TL-42 fish bowl Base Materials: Methacrylate Certifications: MIL-S-46163A Type II, Grade N, MIL-S-22473E Letter Grade CVV Service Rating: -65°F to 300°F, -54°C to 148°C TDS -
Sale!
55161 – JET-LUBE JET-LOK TL-42 softpack
Original price was: $1.03.$0.93Current price is: $0.93.Removable Threadlocker JET-LUBE JET-LOK TL-42 is the most widely used threadlocker for medium-strength, general purpose use. JET-LOK TL-42 will hold all metric and imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. Benefits of using Jet-Lok® TL-42 Removable Does not run off or drip Replaces lock washers Controlled torque tension Thixotropic Typical breakaway strength: 100-200 in-lb Typical prevailing strength: 30-60 in-lb Specifications of 55161 JET-LUBE JET-LOK TL-42 softpack Base Materials: Methacrylate Certifications: MIL-S-46163A Type II, Grade N, MIL-S-22473E Letter Grade CVV Service Rating: -65°F to 300°F, -54°C to 148°C TDS -
Sale!
55165 – JET-LUBE JET-LOK TL-42 10 ml bottle
Original price was: $1.03.$0.93Current price is: $0.93.Removable Threadlocker JET-LUBE JET-LOK TL-42 is the most widely used threadlocker for medium-strength, general purpose use. JET-LOK TL-42 will hold all metric and imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. Benefits of using Jet-Lok® TL-42 Removable Does not run off or drip Replaces lock washers Controlled torque tension Thixotropic Typical breakaway strength: 100-200 in-lb Typical prevailing strength: 30-60 in-lb Specifications of 55165 JET-LUBE JET-LOK TL-42 10 ml bottle Base Materials: Methacrylate Certifications: MIL-S-46163A Type II, Grade N, MIL-S-22473E Letter Grade CVV Service Rating: -65°F to 300°F, -54°C to 148°C TDS -
Sale!
55166 – JET-LOK® TL42-50
Original price was: $18.85.$16.96Current price is: $16.96.Removable Threadlocker JET-LUBE JET-LOK TL-42 is the most widely used threadlocker for medium-strength, general purpose use. JET-LOK TL-42 will hold all metric and imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. Benefits of using Jet-Lok® TL-42 Removable Does not run off or drip Replaces lock washers Controlled torque tension Thixotropic Typical breakaway strength: 100-200 in-lb Typical prevailing strength: 30-60 in-lb Specifications of 55166 - JET-LOK® TL42-50 Base Materials: Methacrylate Certifications: MIL-S-46163A Type II, Grade N, MIL-S-22473E Letter Grade CVV Service Rating: -65°F to 300°F, -54°C to 148°C TDS -
Sale!
55167 – JET-LUBE JET-LOK TL-42 250 ml bottle
Original price was: $1.03.$0.93Current price is: $0.93.Removable Threadlocker JET-LUBE JET-LOK TL-42 is the most widely used threadlocker for medium-strength, general purpose use. JET-LOK TL-42 will hold all metric and imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. Benefits of using Jet-Lok® TL-42 Removable Does not run off or drip Replaces lock washers Controlled torque tension Thixotropic Typical breakaway strength: 100-200 in-lb Typical prevailing strength: 30-60 in-lb Specifications of 55167 JET-LUBE JET-LOK TL-42 250 ml bottle Base Materials: Methacrylate Certifications: MIL-S-46163A Type II, Grade N, MIL-S-22473E Letter Grade CVV Service Rating: -65°F to 300°F, -54°C to 148°C TDS -
Sale!
55666 – JET-LUBE JET-LOK TL-22 50 ml tube
Original price was: $1.03.$0.93Current price is: $0.93.JET-LUBE JET-LOK TL-22 Removable Threadlocker is a thixotropic anaerobic thread locker of low strength designed for easy disassembly of treated components. BENEFITS: Removable Threadlocker Thixotropic anaerobic Low strength designed Easy disassembly Low removal torque Vibration and shock resistance Suitable for most small diameter, fine threaded screws, nuts and bolts Full Cure Time: 24 hours Typical Breakaway Strength: 50-100 in-lb Typical Prevailing Strength: 20-50 in-lb TL-22's anaerobic nature allows it to cure only when confined between metal parts. Low removal torque allows easy disassembly yet provides maximum vibration and shock resistance. Applications All small fasteners where vibration loosening prevention and non-leakage through threaded fastening is required. Ideal on small set screws, brass and most types of small threaded nuts, bolts, screws, hex and slot driven components including keyed fasteners, etc. Not recommended for oxygen service. Service Rating -65°F to 300°F -54°C to 158°C -
Sale!
57966 – JET-LUBE JET-LOK® HP-45 50 ml tube
Original price was: $20.59.$18.53Current price is: $18.53.JET-LUBE JET-LOK® HP-45 JET-LUBE JET-LOK® HP-45 is a pneumatic & Hydraulic Sealant is a fast curing, high strength anaerobic sealant that seals hydraulic and pneumatic fittings up to 2” in diameter, resisting high pressures and vibration loosening. This product has excellent solvent resistance and withstands temperatures to 300°F (148°C). BENEFITS of JET-LOK® HP-45 Fast curing High strength anaerobic sealant Seals hydraulic and pnematic fittings Resists high pressures and vibration Excellent solvent resistance Withstands temperatures up to 300°F Typical strength: 2,000-3,000 psi Fast cure to fixture usually under 30 minutes. Temperature range: -65°F (-54°C) to <300°F (148°C). Typical strength: 2,000-3,000 psi. Applications Typical applications are hydraulic and pneumatic fittings, servo-mechanisms, and fine-filtration systems. Where cure speed is extended due to low temperatures or inactive surfaces, appropriate activators may be used. Best results are found if High Pressure Sealant is applied to 2nd or 3rd threadform. Excess can be wiped away, any migration into lines will not solidify and can be flushed away upon activation of the equipment. Not recommended fo oxygen service. Service Rating -65°F to 300°F -54°C to 148°C -
58629 – Jet-Lube FR Hydraulic Oil ISO 68 400 lb Drum
$3,852.32What is Jet-Lube FR Hydraulic Oil ISO 68? Jet-Lube® FR Hydraulic Oil is formulated to meet guidelines for Factory Mutual (FM) 6930. Factory Mutual approved oils are designed for enhanced safety where potential fire hazards may exist. The formulation is based on polyol ester synthetic fluid. Which pack is part 58629? Part 58629 is the 400 lb Drum. The part number changes with the pack, not with the product: Jet-Lube numbers 2 packs of Jet-Lube FR Hydraulic Oil ISO 68 for the United States. Part numberPack586155 GAL Pail - 35 LB5862955 GAL Drum - 400 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits READILY BIODEGRADABLE – non-toxic and 90% bio-basedSEAL COMPATIBILITY – reduces leaksFACTORY MUTUAL – meets guidelines for FM 6930LOW MAINTENANCE – when compared to waterglycol typeANTIWEAR PROTECTION - extends equipment life and minimizes downtime Specifications Base Materials Polyol Ester Synthetic FluidCertifications FACTORY MUTUAL – meets guidelines for FM 6930 Specifications as published by Jet-Lube for FR Hydraulic Oil ISO 68. Frequently asked questions What does part number 58629 come in? 58629 is the 400 lb Drum, and the price on this page is the price of that pack. Is 58629 sold in other sizes? The same product is numbered 58615 in its other packs. Ask us for any of them. How do I order this part? Order part 58629 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
Sale!
59071 – JET-LUBE JET-LOK EC-GEL 1 oz. tube
Original price was: $1.03.$0.93Current price is: $0.93.JET-LUBE JET-LOK EC-GEL Instant Super-Glue is a thixotropic gel-like super-glue. It is a non-drip formulation and will not run on vertical surfaces. BENEFITS: Instant super-glue Medium to low viscosity cyanoacrylate Bonds plastics and rubber Fast bond time Cure speed: 15-40 seconds General purpose bonding of plastics, name plates to equipment (plastic), thread termination on book bindings. Recommended for use on small gaps or relatively smooth, even surfaces. Applications Where vertical surfaces and/or large gaps are being bonded, EC-Gel is ideal. Using a gel formula as super glue is ideal for eliminating waste and the issues to relate to gluing your finger to the part. Apply the gel directly to the surface by placing one drop at the point of contact allowing the glue to travel or spread as you press fit the item together. Service Rating -65°F to 180°F -54°C to 82°C -
60015 – Jet-Lube Jet-Red EP 2 35 lb Pail
$172.30What is Jet-Lube Jet-Red EP 2? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60015 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60015 is the EP 2 grade, rated 0°F to 400°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60015? Part 60015 is the 35 lb Pail. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Red EP 2 for the United States. Part numberPack6005030/case Cartridges - 14 OZ600155 GAL Pail - 35 LB60024120 LB Keg60029400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 2 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 2. Frequently asked questions What does part number 60015 come in? 60015 is the 35 lb Pail, and the price on this page is the price of that pack. What temperature is Jet-Red EP 2 rated for? Jet-Lube rates it 0°F to 400°F. Is 60015 sold in other sizes? The same product is numbered 60050, 60024, 60029 in its other packs. Ask us for any of them. How do I order this part? Order part 60015 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
60024 – Jet-Lube Jet-Red EP 2 120 lb Keg
$662.50What is Jet-Lube Jet-Red EP 2? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60024 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60024 is the EP 2 grade, rated 0°F to 400°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60024? Part 60024 is the 120 lb Keg. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Red EP 2 for the United States. Part numberPack6005030/case Cartridges - 14 OZ600155 GAL Pail - 35 LB60024120 LB Keg60029400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 2 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 2. Frequently asked questions What does part number 60024 come in? 60024 is the 120 lb Keg, and the price on this page is the price of that pack. What temperature is Jet-Red EP 2 rated for? Jet-Lube rates it 0°F to 400°F. Is 60024 sold in other sizes? The same product is numbered 60050, 60015, 60029 in its other packs. Ask us for any of them. How do I order this part? Order part 60024 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
60029 – Jet-Lube Jet-Red EP 2 400 lb Drum
$1,925.34What is Jet-Lube Jet-Red EP 2? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60029 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60029 is the EP 2 grade, rated 0°F to 400°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60029? Part 60029 is the 400 lb Drum. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Red EP 2 for the United States. Part numberPack6005030/case Cartridges - 14 OZ600155 GAL Pail - 35 LB60024120 LB Keg60029400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 2 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 2. Frequently asked questions What does part number 60029 come in? 60029 is the 400 lb Drum, and the price on this page is the price of that pack. What temperature is Jet-Red EP 2 rated for? Jet-Lube rates it 0°F to 400°F. Is 60029 sold in other sizes? The same product is numbered 60050, 60015, 60024 in its other packs. Ask us for any of them. How do I order this part? Order part 60029 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
Sale!
60050 – Jet-Lube Jet-Red Ep 2 14 oz Cartridge
Original price was: $215.40.$193.86Current price is: $193.86.JET-RED™ is a highly versatile, high-temperature lithium complex grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. With JET-RED, you can streamline your inventory and equipment lubrication needs, making it a preferred choice for various industries. JET-RED Applications: Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment. Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications. Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. NLGI 2 Benefits: Economical Protects against rust and corrosion Pumpable Highly adhesive to metal Resistant to heat, water, oxidation & heavy loading High film strength Specifications: Base Materials: Lithium/Petroleum Oil Service Rating: 0°F to 400°F (-18°C to 204°C) PDS SDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode JetLube JET-RED Premium Multipurpose Grease: How Lithium Complex EP Grease Handles Extreme Heat and Heavy Loads. Or listen on RSS.com. -
60115 – Jet-Lube Jet-Red EP 1 35 lb Pail
$202.05What is Jet-Lube Jet-Red EP 1? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60115 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60115 is the EP 1 grade, rated -10°F to 300°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60115? Part 60115 is the 35 lb Pail. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Red EP 1 for the United States. Part numberPack6015030/case Cartridges - 14 OZ601155 GAL Pail - 35 LB60124120 LB Keg60129400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 1 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 1. Frequently asked questions What does part number 60115 come in? 60115 is the 35 lb Pail, and the price on this page is the price of that pack. What temperature is Jet-Red EP 1 rated for? Jet-Lube rates it -10°F to 300°F. Is 60115 sold in other sizes? The same product is numbered 60150, 60124, 60129 in its other packs. Ask us for any of them. How do I order this part? Order part 60115 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
60124 – Jet-Lube Jet-Red EP 1 120 lb Keg
$766.34What is Jet-Lube Jet-Red EP 1? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60124 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60124 is the EP 1 grade, rated -10°F to 300°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60124? Part 60124 is the 120 lb Keg. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Red EP 1 for the United States. Part numberPack6015030/case Cartridges - 14 OZ601155 GAL Pail - 35 LB60124120 LB Keg60129400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 1 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 1. Frequently asked questions What does part number 60124 come in? 60124 is the 120 lb Keg, and the price on this page is the price of that pack. What temperature is Jet-Red EP 1 rated for? Jet-Lube rates it -10°F to 300°F. Is 60124 sold in other sizes? The same product is numbered 60150, 60115, 60129 in its other packs. Ask us for any of them. How do I order this part? Order part 60124 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
60129 – Jet-Lube Jet-Red EP 1 400 lb Drum
$2,275.57What is Jet-Lube Jet-Red EP 1? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60129 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60129 is the EP 1 grade, rated -10°F to 300°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60129? Part 60129 is the 400 lb Drum. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Red EP 1 for the United States. Part numberPack6015030/case Cartridges - 14 OZ601155 GAL Pail - 35 LB60124120 LB Keg60129400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 1 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 1. Frequently asked questions What does part number 60129 come in? 60129 is the 400 lb Drum, and the price on this page is the price of that pack. What temperature is Jet-Red EP 1 rated for? Jet-Lube rates it -10°F to 300°F. Is 60129 sold in other sizes? The same product is numbered 60150, 60115, 60124 in its other packs. Ask us for any of them. How do I order this part? Order part 60129 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
60150 – Jet-Lube Jet-Red EP 1 14 oz Cartridge, Case of 30
$261.87What is Jet-Lube Jet-Red EP 1? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60150 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60150 is the EP 1 grade, rated -10°F to 300°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60150? Part 60150 is the 14 oz Cartridge, supplied 30 to the case. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Red EP 1 for the United States. Part numberPack6015030/case Cartridges - 14 OZ601155 GAL Pail - 35 LB60124120 LB Keg60129400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 1 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 1. Frequently asked questions What does part number 60150 come in? 60150 is the 14 oz Cartridge, sold 30 to the case, and the price on this page is the price of that case. What temperature is Jet-Red EP 1 rated for? Jet-Lube rates it -10°F to 300°F. Is 60150 sold in other sizes? The same product is numbered 60115, 60124, 60129 in its other packs. Ask us for any of them. How do I order this part? Order part 60150 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
60215 – Jet-Lube Jet-Red EP 0 35 lb Pail
$206.13What is Jet-Lube Jet-Red EP 0? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60215 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60215 is the EP 0 grade, rated -20°F to 250°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60215? Part 60215 is the 35 lb Pail. The part number changes with the pack, not with the product: Jet-Lube numbers 3 packs of Jet-Lube Jet-Red EP 0 for the United States. Part numberPack602155 GAL Pail - 35 LB60224120 LB Keg60229400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 0 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 0. Frequently asked questions What does part number 60215 come in? 60215 is the 35 lb Pail, and the price on this page is the price of that pack. What temperature is Jet-Red EP 0 rated for? Jet-Lube rates it -20°F to 250°F. Is 60215 sold in other sizes? The same product is numbered 60224, 60229 in its other packs. Ask us for any of them. How do I order this part? Order part 60215 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
60224 – Jet-Lube Jet-Red EP 0 120 lb Keg
$796.19What is Jet-Lube Jet-Red EP 0? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60224 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60224 is the EP 0 grade, rated -20°F to 250°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60224? Part 60224 is the 120 lb Keg. The part number changes with the pack, not with the product: Jet-Lube numbers 3 packs of Jet-Lube Jet-Red EP 0 for the United States. Part numberPack602155 GAL Pail - 35 LB60224120 LB Keg60229400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 0 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 0. Frequently asked questions What does part number 60224 come in? 60224 is the 120 lb Keg, and the price on this page is the price of that pack. What temperature is Jet-Red EP 0 rated for? Jet-Lube rates it -20°F to 250°F. Is 60224 sold in other sizes? The same product is numbered 60215, 60229 in its other packs. Ask us for any of them. How do I order this part? Order part 60224 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
60229 – Jet-Lube Jet-Red EP 0 400 lb Drum
$2,302.34What is Jet-Lube Jet-Red EP 0? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60229 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60229 is the EP 0 grade, rated -20°F to 250°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60229? Part 60229 is the 400 lb Drum. The part number changes with the pack, not with the product: Jet-Lube numbers 3 packs of Jet-Lube Jet-Red EP 0 for the United States. Part numberPack602155 GAL Pail - 35 LB60224120 LB Keg60229400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 0 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 0. Frequently asked questions What does part number 60229 come in? 60229 is the 400 lb Drum, and the price on this page is the price of that pack. What temperature is Jet-Red EP 0 rated for? Jet-Lube rates it -20°F to 250°F. Is 60229 sold in other sizes? The same product is numbered 60215, 60224 in its other packs. Ask us for any of them. How do I order this part? Order part 60229 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
Sale!
60242 – Jet-Lube Ps Terminal 10 oz Aerosol
Price range: $51.93 through $623.16CFC-Free Electrical Contact Cleaner - NSF K2 Jet-Lube PS TERMINAL™ is an electrical contact cleaner formulated with a blend of HCFC and HFC solvents and propellants to safely and quickly clean electrical and electronic components and equipment without damaging the environment or ozone levels. PS TERMINAL penetrates and remove dirt, grease and organic contaminants and then evaporates, leaving a residue-free surface. Benefits: Fast evaporating Residue-free No VOC's Non-flammable Non-staining Odorless High pressure stream spray Specifications: Base Materials: Solvent Certifications: NSF Registered K2 Reg.# 136910 Service Rating: >35kv Dielectric Strength TDS SDS -
60415 – Jet-Lube Jet-Red EP 00 35 lb Pail
$206.13What is Jet-Lube Jet-Red EP 00? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60415 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60415 is the EP 00 grade, rated -30°F to 200°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60415? Part 60415 is the 35 lb Pail. The part number changes with the pack, not with the product: Jet-Lube numbers 3 packs of Jet-Lube Jet-Red EP 00 for the United States. Part numberPack604155 GAL Pail - 35 LB60424120 LB Keg60429400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 00 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 00. Frequently asked questions What does part number 60415 come in? 60415 is the 35 lb Pail, and the price on this page is the price of that pack. What temperature is Jet-Red EP 00 rated for? Jet-Lube rates it -30°F to 200°F. Is 60415 sold in other sizes? The same product is numbered 60424, 60429 in its other packs. Ask us for any of them. How do I order this part? Order part 60415 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
60424 – Jet-Lube Jet-Red EP 00 120 lb Keg
$796.19What is Jet-Lube Jet-Red EP 00? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60424 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60424 is the EP 00 grade, rated -30°F to 200°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60424? Part 60424 is the 120 lb Keg. The part number changes with the pack, not with the product: Jet-Lube numbers 3 packs of Jet-Lube Jet-Red EP 00 for the United States. Part numberPack604155 GAL Pail - 35 LB60424120 LB Keg60429400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 00 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 00. Frequently asked questions What does part number 60424 come in? 60424 is the 120 lb Keg, and the price on this page is the price of that pack. What temperature is Jet-Red EP 00 rated for? Jet-Lube rates it -30°F to 200°F. Is 60424 sold in other sizes? The same product is numbered 60415, 60429 in its other packs. Ask us for any of them. How do I order this part? Order part 60424 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
60429 – Jet-Lube Jet-Red EP 00 400 lb Drum
$2,302.34What is Jet-Lube Jet-Red EP 00? JET-RED™ is a highly versatile, high-temperature lithium complex red grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. Which grade part 60429 is. Jet-Lube rates each grade of Jet-Red separately: EP 00 -30°F to 200°F, EP 0 -20°F to 250°F, EP 1 -10°F to 300°F, EP 2 0°F to 400°F. Part 60429 is the EP 00 grade, rated -30°F to 200°F. The grades share a body of copy on the manufacturer's page, so the rating is the line that separates them. Which pack is part 60429? Part 60429 is the 400 lb Drum. The part number changes with the pack, not with the product: Jet-Lube numbers 3 packs of Jet-Lube Jet-Red EP 00 for the United States. Part numberPack604155 GAL Pail - 35 LB60424120 LB Keg60429400 LB Drum Anyone holding a container with only a number on it can read the pack off that table. Where Jet-Red EP 00 is used Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment.Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications.Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. Benefits EconomicalProtects against rust and corrosionPumpableHighly adhesive to metalResistant to heat, water, oxidation & heavy loadingHigh film strength Specifications Base Materials Lithium/Petroleum OilService Rating EP 00 | -30°F (-34°C) to 200°F (93°C) EP 0 | -20°F (-29°C) to 250°F (121°C) EP 1 | -10°F (-23°C) to 300°F (149°C) EP 2 | 0°F to 400°F (-18°C to 204°C) Specifications as published by Jet-Lube for Jet-Red EP 00. Frequently asked questions What does part number 60429 come in? 60429 is the 400 lb Drum, and the price on this page is the price of that pack. What temperature is Jet-Red EP 00 rated for? Jet-Lube rates it -30°F to 200°F. Is 60429 sold in other sizes? The same product is numbered 60415, 60424 in its other packs. Ask us for any of them. How do I order this part? Order part 60429 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
Sale!
60541 – Jet-Lube Z-Plate 14.75 oz Aerosol
Original price was: $23.54.$21.19Current price is: $21.19.Zinc-Rich Galvanized Coating Jet-Lube Z-PLATE™ provides the protection of hot-dip galvanizing plus the convenience of on-the-job aerosol application. Z-PLATE contains 95% pure zinc and forms a tough, durable and flexible zinc metal coating that actually bonds electro-chemically with the base metal to protect against rust, rust-spreading and corrosion. Ideal tubing connections - aluminum. Benefits of using Z-Plate™ Easy to apply Quick drying Water displacing Dry film Long Lasting Indoor/Outdoor use Rust & corrosion inhibited Permanent, Flexible Specifications of 60541 Z-PLATE™ Base Materials: Zinc / Resin - Epoxy EsterCertifications: MIL-PRF-26915D (USAF), USDA Authorized TDS (Aerosol) SDS -
61115 – Jet-Lube Jet-Gold EP 1 35 lb Pail
$334.22What is Jet-Lube Jet-Gold EP 1? JET-GOLD EP is a high-performance calcium sulfonate complex grease designed for demanding applications involving extreme pressure, water, heat, or chemical attack. The thickener system in JET-GOLD EP provides protective benefits similar to molybdenum disulfide, safeguarding equipment from wear under extreme load and slow speed conditions. JET-GOLD EP is effective in neutralizing acids and resisting reactions with caustic materials. Which pack is part 61115? Part 61115 is the 35 lb Pail. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Gold EP 1 for the United States. Part numberPack6115030/Case Cartridges - 0.95 LB611155 GAL Pail - 35 LB6112415 GAL Keg - 120 LB6112950-55 GAL Drum - 400 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits LONG LIFE - reduced relubrication frequencyWATER RESISTANT - seals out water, even in underwater applicationsWIDE SPEED RANGE - recommended for use in electric motor bearings, as well as, slow-moving bearings and bushings Specifications Base Materials Calcium SulfonateCertifications Meets the DIN 51502 standard: KP2R -20 Specifications as published by Jet-Lube for Jet-Gold EP 1. Frequently asked questions What does part number 61115 come in? 61115 is the 35 lb Pail, and the price on this page is the price of that pack. Is 61115 sold in other sizes? The same product is numbered 61150, 61124, 61129 in its other packs. Ask us for any of them. How do I order this part? Order part 61115 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
61124 – Jet-Lube Jet-Gold EP 1 120 lb Keg
$1,221.58What is Jet-Lube Jet-Gold EP 1? JET-GOLD EP is a high-performance calcium sulfonate complex grease designed for demanding applications involving extreme pressure, water, heat, or chemical attack. The thickener system in JET-GOLD EP provides protective benefits similar to molybdenum disulfide, safeguarding equipment from wear under extreme load and slow speed conditions. JET-GOLD EP is effective in neutralizing acids and resisting reactions with caustic materials. Which pack is part 61124? Part 61124 is the 120 lb Keg. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Gold EP 1 for the United States. Part numberPack6115030/Case Cartridges - 0.95 LB611155 GAL Pail - 35 LB6112415 GAL Keg - 120 LB6112950-55 GAL Drum - 400 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits LONG LIFE - reduced relubrication frequencyWATER RESISTANT - seals out water, even in underwater applicationsWIDE SPEED RANGE - recommended for use in electric motor bearings, as well as, slow-moving bearings and bushings Specifications Base Materials Calcium SulfonateCertifications Meets the DIN 51502 standard: KP2R -20 Specifications as published by Jet-Lube for Jet-Gold EP 1. Frequently asked questions What does part number 61124 come in? 61124 is the 120 lb Keg, and the price on this page is the price of that pack. Is 61124 sold in other sizes? The same product is numbered 61150, 61115, 61129 in its other packs. Ask us for any of them. How do I order this part? Order part 61124 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
61129 – Jet-Lube Jet-Gold EP 1 400 lb Drum
$3,734.59What is Jet-Lube Jet-Gold EP 1? JET-GOLD EP is a high-performance calcium sulfonate complex grease designed for demanding applications involving extreme pressure, water, heat, or chemical attack. The thickener system in JET-GOLD EP provides protective benefits similar to molybdenum disulfide, safeguarding equipment from wear under extreme load and slow speed conditions. JET-GOLD EP is effective in neutralizing acids and resisting reactions with caustic materials. Which pack is part 61129? Part 61129 is the 400 lb Drum. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Gold EP 1 for the United States. Part numberPack6115030/Case Cartridges - 0.95 LB611155 GAL Pail - 35 LB6112415 GAL Keg - 120 LB6112950-55 GAL Drum - 400 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits LONG LIFE - reduced relubrication frequencyWATER RESISTANT - seals out water, even in underwater applicationsWIDE SPEED RANGE - recommended for use in electric motor bearings, as well as, slow-moving bearings and bushings Specifications Base Materials Calcium SulfonateCertifications Meets the DIN 51502 standard: KP2R -20 Specifications as published by Jet-Lube for Jet-Gold EP 1. Frequently asked questions What does part number 61129 come in? 61129 is the 400 lb Drum, and the price on this page is the price of that pack. Is 61129 sold in other sizes? The same product is numbered 61150, 61115, 61124 in its other packs. Ask us for any of them. How do I order this part? Order part 61129 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
61150 – Jet-Lube Jet-Gold EP 1 0.95 lb Cartridge, Case of 30
$384.90What is Jet-Lube Jet-Gold EP 1? JET-GOLD EP is a high-performance calcium sulfonate complex grease designed for demanding applications involving extreme pressure, water, heat, or chemical attack. The thickener system in JET-GOLD EP provides protective benefits similar to molybdenum disulfide, safeguarding equipment from wear under extreme load and slow speed conditions. JET-GOLD EP is effective in neutralizing acids and resisting reactions with caustic materials. Which pack is part 61150? Part 61150 is the 0.95 lb Cartridge, supplied 30 to the case. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Gold EP 1 for the United States. Part numberPack6115030/Case Cartridges - 0.95 LB611155 GAL Pail - 35 LB6112415 GAL Keg - 120 LB6112950-55 GAL Drum - 400 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits LONG LIFE - reduced relubrication frequencyWATER RESISTANT - seals out water, even in underwater applicationsWIDE SPEED RANGE - recommended for use in electric motor bearings, as well as, slow-moving bearings and bushings Specifications Base Materials Calcium SulfonateCertifications Meets the DIN 51502 standard: KP2R -20 Specifications as published by Jet-Lube for Jet-Gold EP 1. Frequently asked questions What does part number 61150 come in? 61150 is the 0.95 lb Cartridge, sold 30 to the case, and the price on this page is the price of that case. Is 61150 sold in other sizes? The same product is numbered 61115, 61124, 61129 in its other packs. Ask us for any of them. How do I order this part? Order part 61150 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
61215 – Jet-Lube Jet-Gold EP 2 35 lb Pail
$337.54What is Jet-Lube Jet-Gold EP 2? JET-GOLD EP is a high-performance calcium sulfonate complex grease designed for demanding applications involving extreme pressure, water, heat, or chemical attack. The thickener system in JET-GOLD EP provides protective benefits similar to molybdenum disulfide, safeguarding equipment from wear under extreme load and slow speed conditions. JET-GOLD EP is effective in neutralizing acids and resisting reactions with caustic materials. Which pack is part 61215? Part 61215 is the 35 lb Pail. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Gold EP 2 for the United States. Part numberPack6125030/Case Cartridges - 0.95 LB612155 GAL Pail - 35 LB6122415 GAL Keg - 120 LB6122950-55 GAL Drum - 400 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits LONG LIFE - reduced relubrication frequencyWATER RESISTANT - seals out water, even in underwater applicationsWIDE SPEED RANGE - recommended for use in electric motor bearings, as well as, slow-moving bearings and bushings Specifications Base Materials Calcium SulfonateCertifications Meets the DIN 51502 standard: KP2R -20 Specifications as published by Jet-Lube for Jet-Gold EP 2. Frequently asked questions What does part number 61215 come in? 61215 is the 35 lb Pail, and the price on this page is the price of that pack. Is 61215 sold in other sizes? The same product is numbered 61250, 61224, 61229 in its other packs. Ask us for any of them. How do I order this part? Order part 61215 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
61224 – Jet-Lube Jet-Gold EP 2 120 lb Keg
$1,232.94What is Jet-Lube Jet-Gold EP 2? JET-GOLD EP is a high-performance calcium sulfonate complex grease designed for demanding applications involving extreme pressure, water, heat, or chemical attack. The thickener system in JET-GOLD EP provides protective benefits similar to molybdenum disulfide, safeguarding equipment from wear under extreme load and slow speed conditions. JET-GOLD EP is effective in neutralizing acids and resisting reactions with caustic materials. Which pack is part 61224? Part 61224 is the 120 lb Keg. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Gold EP 2 for the United States. Part numberPack6125030/Case Cartridges - 0.95 LB612155 GAL Pail - 35 LB6122415 GAL Keg - 120 LB6122950-55 GAL Drum - 400 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits LONG LIFE - reduced relubrication frequencyWATER RESISTANT - seals out water, even in underwater applicationsWIDE SPEED RANGE - recommended for use in electric motor bearings, as well as, slow-moving bearings and bushings Specifications Base Materials Calcium SulfonateCertifications Meets the DIN 51502 standard: KP2R -20 Specifications as published by Jet-Lube for Jet-Gold EP 2. Frequently asked questions What does part number 61224 come in? 61224 is the 120 lb Keg, and the price on this page is the price of that pack. Is 61224 sold in other sizes? The same product is numbered 61250, 61215, 61229 in its other packs. Ask us for any of them. How do I order this part? Order part 61224 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
61229 – Jet-Lube Jet-Gold EP 2 400 lb Drum
$3,772.46What is Jet-Lube Jet-Gold EP 2? JET-GOLD EP is a high-performance calcium sulfonate complex grease designed for demanding applications involving extreme pressure, water, heat, or chemical attack. The thickener system in JET-GOLD EP provides protective benefits similar to molybdenum disulfide, safeguarding equipment from wear under extreme load and slow speed conditions. JET-GOLD EP is effective in neutralizing acids and resisting reactions with caustic materials. Which pack is part 61229? Part 61229 is the 400 lb Drum. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Gold EP 2 for the United States. Part numberPack6125030/Case Cartridges - 0.95 LB612155 GAL Pail - 35 LB6122415 GAL Keg - 120 LB6122950-55 GAL Drum - 400 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits LONG LIFE - reduced relubrication frequencyWATER RESISTANT - seals out water, even in underwater applicationsWIDE SPEED RANGE - recommended for use in electric motor bearings, as well as, slow-moving bearings and bushings Specifications Base Materials Calcium SulfonateCertifications Meets the DIN 51502 standard: KP2R -20 Specifications as published by Jet-Lube for Jet-Gold EP 2. Frequently asked questions What does part number 61229 come in? 61229 is the 400 lb Drum, and the price on this page is the price of that pack. Is 61229 sold in other sizes? The same product is numbered 61250, 61215, 61224 in its other packs. Ask us for any of them. How do I order this part? Order part 61229 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
61250 – Jet-Lube Jet-Gold EP 2 0.95 lb Cartridge, Case of 30
$387.62What is Jet-Lube Jet-Gold EP 2? JET-GOLD EP is a high-performance calcium sulfonate complex grease designed for demanding applications involving extreme pressure, water, heat, or chemical attack. The thickener system in JET-GOLD EP provides protective benefits similar to molybdenum disulfide, safeguarding equipment from wear under extreme load and slow speed conditions. JET-GOLD EP is effective in neutralizing acids and resisting reactions with caustic materials. Which pack is part 61250? Part 61250 is the 0.95 lb Cartridge, supplied 30 to the case. The part number changes with the pack, not with the product: Jet-Lube numbers 4 packs of Jet-Lube Jet-Gold EP 2 for the United States. Part numberPack6125030/Case Cartridges - 0.95 LB612155 GAL Pail - 35 LB6122415 GAL Keg - 120 LB6122950-55 GAL Drum - 400 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits LONG LIFE - reduced relubrication frequencyWATER RESISTANT - seals out water, even in underwater applicationsWIDE SPEED RANGE - recommended for use in electric motor bearings, as well as, slow-moving bearings and bushings Specifications Base Materials Calcium SulfonateCertifications Meets the DIN 51502 standard: KP2R -20 Specifications as published by Jet-Lube for Jet-Gold EP 2. Frequently asked questions What does part number 61250 come in? 61250 is the 0.95 lb Cartridge, sold 30 to the case, and the price on this page is the price of that case. Is 61250 sold in other sizes? The same product is numbered 61215, 61224, 61229 in its other packs. Ask us for any of them. How do I order this part? Order part 61250 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
Sale!
61442 – Jet-Lube Clean-Up Ii 14 oz Aerosol
Original price was: $14.22.$12.80Current price is: $12.80.Industrial Grade Degrease Jet-Lube CLEAN-UP II is a specially formulated, low VOC blend of solvents designed to quickly dissolve and rinse away dirt, grease, grime, oil, tar and wax while being both environmentally responsible and ozone friendly. CLEAN UP II™ contains no chlorinated or fluorinated solvents, no hazardous air pollutants and evaporates residue-free quickly. It is California compliant and acceptable for use in CARB/OTC States. CLEAN UP II starts working immediately on contact, breaking down and dissolving even stubborn contaminants without the use of fluorinated, chlorinated or SARA listed ingredients. It evaporates quickly while cleaning and leaves a residue-free surface. Safe on all metals and some plastics. Caution: Flammable Benefits of using Clean-Up™ II Replaces 1:1:1 Trichloroethane Fast evaporating Non-corrosive Non-staining Non-chlorinated Residue-free Low VOC's Specifications of 61442 CLEAN-UP™ II Base Materials: Acetone & Heptane Isomers Flammable Solvents Certifications: California Compliant Service Rating: Dielectric strength & breakdown voltage - 6.3 KV AC TDS (Aerosol) SDS -
Sale!
61533 – CLEAN-UP™
Original price was: $184.48.$166.04Current price is: $166.04.A cleaner that is residue free and meets the requirements for a high rating of 29,000KV for electrical and energized equipment. A degreaser that penetrates heavy oil and grease products to breakdown and dissolve the petroleum base ingredients to clean the surface prior to painting or preparing for assembly.