Jet-Lube
Showing 226–270 of 543 results
-
34529 – MARINE WIRE ROPE & HAWSER GREASE™
$2,457.96Water-Resistant Wire Rope & Hawser Lubricant An economical high performance lubricant for wire rope, hawser and related applications requiring a water resistant, tenacious product that resists the effects of fresh and salt water spray, oxidation, humidity, heat and other adverse conditions common to marine and heavy industrial applications. MARINE WIRE ROPE & HAWSER GREASE maintains and extends the life and performance of wire rope by providing a non-drying film on the outside of the wire rope. This film protects wire ropes from corrosion while lubricating the inner strands, drums and sheaves. Benefits of using Marine Wire Rope & Hawser Grease Non-staining Anti-corrosive Non-drying Water-resistant High temperature Timken Load - 55 lbs. Specifications: Base Materials: Lithium / Petroleum Oils Certifications: MIL-G-18458B (SH) Service Rating: 0°F to 325°F, -18°C to 163°C -
35016 – ARCTIC™
$300.89Extreme Low Temperature Grease ARCTIC 5 GAL. PAIL is an excellent service grease with an extreme temperature range, allowing it to resist cold without deterioration of the lubricating properties and still withstand summer or other high temperatures. It will resist such environmental contact as humidity, ice and road salts without hardening, washing off or deteriorating. ARCTIC is an anhydrous, calcium 12- hydroxystearate grease with a dropping point of 285°F (141°C). It contains no solid additives such as graphite, moly disulfide, or zinc oxide. It also passes the application salt-spray-resistance and rust tests required by the United States Government for its severe environmental contact greases. Benefits of using Arctic™ Has a dropping point of 285°F Extreme cold weather stability Water-resistant Rust & corrosion inhibitors High strength fluid film Extreme adhesion properties Pumpable Timken load - 60 lbs. Specifications: Base Materials: Calcium / Lubricating Oils Certifications: Passed the Shell Roll Test for 100 hours at 150°F (66°C), and passed Federal Test Method Standard No. 791B, Method No. 3454.2 “Leakage Tendencies of Automotive & Trucks Wheel Bearing Greases” and ASTM 1263., MIL-G-25537C NATOG366 Service Rating: -65°F to 225°F, -54°C to 107°C TDS SDS -
35024 – ARCTIC™
$839.78Extreme Low Temperature Grease ARCTIC 15 GAL. DRUM is an excellent service grease with an extreme temperature range, allowing it to resist cold without deterioration of the lubricating properties and still withstand summer or other high temperatures. It will resist such environmental contact as humidity, ice and road salts without hardening, washing off or deteriorating. ARCTIC is an anhydrous, calcium 12- hydroxystearate grease with a dropping point of 285°F (141°C). It contains no solid additives such as graphite, moly disulfide, or zinc oxide. It also passes the application salt-spray-resistance and rust tests required by the United States Government for its severe environmental contact greases. Benefits of using Arctic™ Has a dropping point of 285°F Extreme cold weather stability Water-resistant Rust & corrosion inhibitors High strength fluid film Extreme adhesion properties Pumpable Timken load - 60 lbs. Specifications: Base Materials: Calcium / Lubricating Oils Certifications: Passed the Shell Roll Test for 100 hours at 150°F (66°C), and passed Federal Test Method Standard No. 791B, Method No. 3454.2 “Leakage Tendencies of Automotive & Trucks Wheel Bearing Greases” and ASTM 1263., MIL-G-25537C NATOG366 Service Rating: -65°F to 225°F, -54°C to 107°C -
35029 – ARCTIC™
$3,266.16Extreme Low Temperature Grease ARCTIC 50 GAL. DRUM is an excellent service grease with an extreme temperature range, allowing it to resist cold without deterioration of the lubricating properties and still withstand summer or other high temperatures. It will resist such environmental contact as humidity, ice and road salts without hardening, washing off or deteriorating. ARCTIC is an anhydrous, calcium 12- hydroxystearate grease with a dropping point of 285°F (141°C). It contains no solid additives such as graphite, moly disulfide, or zinc oxide. It also passes the application salt-spray-resistance and rust tests required by the United States Government for its severe environmental contact greases. Benefits of using Arctic™ Has a dropping point of 285°F Extreme cold weather stability Water-resistant Rust & corrosion inhibitors High strength fluid film Extreme adhesion properties Pumpable Timken load - 60 lbs. Specifications: Base Materials: Calcium / Lubricating Oils Certifications: Passed the Shell Roll Test for 100 hours at 150°F (66°C), and passed Federal Test Method Standard No. 791B, Method No. 3454.2 “Leakage Tendencies of Automotive & Trucks Wheel Bearing Greases” and ASTM 1263., MIL-G-25537C NATOG366 Service Rating: -65°F to 225°F, -54°C to 107°C -
35050 – ARCTIC™
$10.59Extreme Low Temperature Grease ARCTIC 14 OZ. CARTRIDGE is an excellent service grease with an extreme temperature range, allowing it to resist cold without deterioration of the lubricating properties and still withstand summer or other high temperatures. It will resist such environmental contact as humidity, ice and road salts without hardening, washing off or deteriorating. ARCTIC is an anhydrous, calcium 12- hydroxystearate grease with a dropping point of 285°F (141°C). It contains no solid additives such as graphite, moly disulfide, or zinc oxide. It also passes the application salt-spray-resistance and rust tests required by the United States Government for its severe environmental contact greases. Benefits of using Arctic™ Has a dropping point of 285°F Extreme cold weather stability Water-resistant Rust & corrosion inhibitors High strength fluid film Extreme adhesion properties Pumpable Timken load - 60 lbs. Specifications: Base Materials: Calcium / Lubricating Oils Certifications: Passed the Shell Roll Test for 100 hours at 150°F (66°C), and passed Federal Test Method Standard No. 791B, Method No. 3454.2 “Leakage Tendencies of Automotive & Trucks Wheel Bearing Greases” and ASTM 1263., MIL-G-25537C NATOG366 Service Rating: -65°F to 225°F, -54°C to 107°C TDS SDS -
35502 – V-2®
$22.09Multipurpose Thread Sealant w/ PTFE - NSF P1 V-2® 1/2 PT. BRUSHTOP CAN is a multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 is a water-resistant, non-staining, low-odor sealant which includes PTFE and unique natural fillers for tighter joint make-up due to increased thread lubrication. Benefits of using V-2® Allows immediate pressurization Non-petroleum based Contains PTFE and natural fillers Water-resistant For use with potable water Non-flammable Low odor Brushable to 0°F (-18°C) Specifications: Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121265, Conforms to assembly bill 1953 Service Rating: -70°F to 500° F, -57°C to 260°C TDS SDS -
35504 – V-2®
$28.36Multipurpose Thread Sealant w/ PTFE - NSF P1 V-2® 1 PT. BRUSHTOP CAN is a multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 is a water-resistant, non-staining, low-odor sealant which includes PTFE and unique natural fillers for tighter joint make-up due to increased thread lubrication. Benefits of using V-2® NSF P-1 Registered Allows immediate pressurization Non-petroleum based Contains PTFE and natural fillers Water-resistant For use with potable water Non-flammable Low odor Brushable to 0°F (-18°C) Specifications: Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121265, Conforms to assembly bill 1953 Service Rating: -70°F to 500° F, -57°C to 260°C TDS SDS -
35513 – V-2®
$200.63Multipurpose Thread Sealant w/ PTFE - NSF P1 V-2® 2.5 GAL. PAIL is a multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 is a water-resistant, non-staining, low-odor sealant which includes PTFE and unique natural fillers for tighter joint make-up due to increased thread lubrication. Benefits of using V-2® Allows immediate pressurization Non-petroleum based Contains PTFE and natural fillers Water-resistant For use with potable water Non-flammable Low odor Brushable to 0°F (-18°C) Specifications: Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121265, Conforms to assembly bill 1953 Service Rating: -70°F to 500° F, -57°C to 260°C -
35515 – V-2®
$609.19Multipurpose Thread Sealant w/ PTFE - NSF P1 V-2® 5 GAL. PAIL is a multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 is a water-resistant, non-staining, low-odor sealant which includes PTFE and unique natural fillers for tighter joint make-up due to increased thread lubrication. Benefits of using V-2® Allows immediate pressurization Non-petroleum based Contains PTFE and natural fillers Water-resistant For use with potable water Non-flammable Low odor Brushable to 0°F (-18°C) Specifications: Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121265, Conforms to assembly bill 1953 Service Rating: -70°F to 500° F, -57°C to 260°C -
35523 – V-2®
$169.13Multipurpose Thread Sealant w/ PTFE - NSF P1 Jet-Lube V-2® 1 GAL. PAIL is a multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 is a water-resistant, non-staining, low-odor sealant which includes PTFE and unique natural fillers for tighter joint make-up due to increased thread lubrication. Benefits of using V-2® Allows immediate pressurization Non-petroleum based Contains PTFE and natural fillers Water-resistant For use with potable water Non-flammable Low odor Brushable to 0°F (-18°C) Specifications: Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121265, Conforms to assembly bill 1953 Service Rating: -70°F to 500° F, -57°C to 260°C -
35524 – V-2®
$1,019.73Multipurpose Thread Sealant w/ PTFE - NSF P1 V-2® 15 GAL. DRUM is a multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 is a water-resistant, non-staining, low-odor sealant which includes PTFE and unique natural fillers for tighter joint make-up due to increased thread lubrication. Benefits of using V-2® Allows immediate pressurization Non-petroleum based Contains PTFE and natural fillers Water-resistant For use with potable water Non-flammable Low odor Brushable to 0°F (-18°C) Specifications: Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121265, Conforms to assembly bill 1953 Service Rating: -70°F to 500° F, -57°C to 260°C -
35529 – V-2®
$5,525.96Multipurpose Thread Sealant w/ PTFE - NSF P1 V-2® 500 LB. DRUM is a multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 is a water-resistant, non-staining, low-odor sealant which includes PTFE and unique natural fillers for tighter joint make-up due to increased thread lubrication. Benefits of using V-2® Allows immediate pressurization Non-petroleum based Contains PTFE and natural fillers Water-resistant For use with potable water Non-flammable Low odor Brushable to 0°F (-18°C) Specifications: Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121265, Conforms to assembly bill 1953 Service Rating: -70°F to 500° F, -57°C to 260°C -
35555 – JET-LUBE V-2 1/4 pt. brush top
$0.93Multipurpose Thread Sealant w/ PTFE - NSF P1 JET-LUBE V-2® is a multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 is a water-resistant, non-staining, low-odor sealant which includes PTFE and unique natural fillers for tighter joint make-up due to increased thread lubrication. Benefits of using V-2® Allows immediate pressurization Non-petroleum based Contains PTFE and natural fillers Water-resistant For use with potable water Non-flammable Low odor Brushable to 0°F (-18°C) Specifications of 35555 JET-LUBE V-2 1/4 pt. brush top Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121265, Conforms to assembly bill 1953 Service Rating: -70°F to 500° F, -57°C to 260°C TDS SDS -
35615 – V-2® PLUS
$428.06Multipurpose Thread Sealant w/ PTFE A multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 PLUS provides an excellent seal for correctly made-up taper thread connections to 50mm (2) diameter. Benefits of using V-2® Soft setting Allows immediate pressurization Contains aramid fiber, PTFE & natural fillers Water-resistant Low odor Non-petroleum based Specifications: Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121266, WRAS approved for cold potable water, CORGI approved for gas installation Service Rating: -0.4°F to 248°F, -18°C to 120°C -
35623 – V-2® PLUS
$113.42Multipurpose Thread Sealant w/ PTFE A multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 PLUS provides an excellent seal for correctly made-up taper thread connections to 50mm (2) diameter. Benefits of using V-2® Soft setting Allows immediate pressurization Contains aramid fiber, PTFE & natural fillers Water-resistant Low odor Non-petroleum based Specifications: Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121266, WRAS approved for cold potable water, CORGI approved for gas installation Service Rating: -0.4°F to 248°F, -18°C to 120°C -
35625 – V-2® PLUS
$4,648.13Multipurpose Thread Sealant w/ PTFE A multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 PLUS provides an excellent seal for correctly made-up taper thread connections to 50mm (2) diameter. Benefits of using V-2® Soft setting Allows immediate pressurization Contains aramid fiber, PTFE & natural fillers Water-resistant Low odor Non-petroleum based Specifications: Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121266, WRAS approved for cold potable water, CORGI approved for gas installation Service Rating: -0.4°F to 248°F, -18°C to 120°C -
35629 – V-2® PLUS
$4,513.29Multipurpose Thread Sealant w/ PTFE A multipurpose jointing compound that is soft-setting, non-petroleum based for use with potable water, liquids and gases where immediate pressurization is desirable or necessary. V-2 PLUS provides an excellent seal for correctly made-up taper thread connections to 50mm (2) diameter. Benefits of using V-2® Soft setting Allows immediate pressurization Contains aramid fiber, PTFE & natural fillers Water-resistant Low odor Non-petroleum based Specifications: Base Materials: Vegetable Oils Certifications: MIL-TT-S-1732, Nato S-716, UNIFORM PLUMBING CODE: U.S. IAPMO File #1282, ULC Listed for petroleum products, NSF Registered P1 Reg. #121266, WRAS approved for cold potable water, CORGI approved for gas installation Service Rating: -0.4°F to 248°F, -18°C to 120°C -
36005 – Jet-Lube ALCO-EP 1 lb can
$0.93Extreme Pressure Multipurpose Grease w/ MoS2 Jet-Lube Jet-Lube ALCO-EP ECF is a versatile aluminum complex grease with a high level of rust and oxidation inhibitors. ALCO-EP™ contains molybdenum disulfide (MoS2) and graphite, which plate out to resist metal-to-metal contact in boundary modes of lubrication. ALCO-EP provides superior wear protection against extreme pressure and is highly water resistant. Its 60-pound rating in the Timken load test proves ALCO-EP to have excellent load-carrying ability. Ideal for anti-friction bearings. Benefits of using Alco-EP™ Excellent work stability under high loads, shock, & vibration Highly water-resistant Rust & corrosion inhibitors High strength fluid film Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications of 36005 Jet-Lube ALCO-EP 1 lb can Base Materials: Aluminum Complex / Lubricating Oils Service Rating: -25°F to 450°F, -32°C to 232°C TDS SDS -
36415 – HPHT SEALANT
$657.98OCTG High-Pressure, High-Temp Thread Compound JET-LUBE HPHT SEALANT is specifically formulated to meet performance requirements of proprietary, metal-to-metal seal, and high interference connection designs utilizing high performance materials including super chrome and high-alloys steels. HPHT THREAD COMPOUND's formulation contains a small percentage of PTFE to aid high temperature sealing properties. The particle size of the PTFE is controlled to allow it to seal 8-round and buttress thread forms. Its advanced base grease is a carefully selected balance of synthetic oils with an advanced biodegradable grease thickener technology. The base grease provides excellent adhesion and stability yet biodegrades and is environmentally safe based upon the Harmonised Offshore Chemical Notification Format (HOCNF) guidelines. Tubing connections ideal for 8-round and premium mechanical. Benefits of using HPHT SEALANT Biodegradable Metal-free Low volatility at temperatures up to 232°C (450°F) High film strength Sticks to wet or oily threads Controlled solid package to accommodate premium mechanical seals and 8-round connection requirements Specifications of 36415 HPHT SEALANT Base Materials: Complex / Synthetic PAO & EsterFriction / K-Factor: 1.0 (Relative to API-MODIFIED)Certifications: OSPAR Commissions HOCNF CLASSIFICATION “Yellow” rating for Norway. CLASSIFICATION “E” for United Kingdom & The NetherlandsService Rating: -30°F to 450°F, -34°C to 232°C TDSSDS -
36423 – HPHT THREAD COMPOUND
$175.77OCTG High-Pressure, High-Temp Thread Compound JET-LUBE HPHT THREAD COMPOUND is specifically formulated to meet performance requirements of proprietary, metal-to-metal seal, and high interference connection designs utilizing high performance materials including super chrome and high-alloys steels. HPHT THREAD COMPOUND's formulation contains a small percentage of PTFE to aid high temperature sealing properties. The particle size of the PTFE is controlled to allow it to seal 8-round and buttress thread forms. Its advanced base grease is a carefully selected balance of synthetic oils with an advanced biodegradable grease thickener technology. The base grease provides excellent adhesion and stability yet biodegrades and is environmentally safe based upon the Harmonised Offshore Chemical Notification Format (HOCNF) guidelines. Tubing connections ideal for 8-round and premium mechanical. Benefits of using HPHT™ Thread Compound Biodegradable Metal-free Low volatility at temperatures up to 232°C (450°F) High film strength Sticks to wet or oily threads Controlled solid package to accommodate premium mechanical seals and 8-round connection requirements Specifications of 36423 HPHT THREAD COMPOUND Base Materials: Complex / Synthetic PAO & EsterFriction / K-Factor: 1.0 (Relative to API-MODIFIED)Certifications: OSPAR Commissions HOCNF CLASSIFICATION “Yellow” rating for Norway. CLASSIFICATION “E” for United Kingdom & The NetherlandsService Rating: -30°F to 450°F, -34°C to 232°C TDSSDS -
36916 – JET-LUBE ALCO-EP ECF WATER WELL 35 lb. pail
$0.93JET-LUBE ALCO-EP ECF™ WATER WELL is a premium, state-of-the-art, multipurpose calcium sulfonate complex grease thickening a blend of synthetic oils selected to provide the level of biodegradation required to meet the Norwegian “Yellow” and the combined UK and Netherlands “E” categories. These are the most safe environmental ratings for a lubricating grease. The non-plating, organic EP/anti-wear additives allow ALCO-EP ECF WW to be used where tolerances are low and/or speeds are high. BENEFITS of using ALCO-EP ECF WATER WELL Superior rust and corrosion protection Dropping Point of 550°F (260°C) Biodegradable ALCO-EP ECF WW contains polymer additives, further enhancing the inherent water resistance of a calcium complex- based grease. ALCO-EP ECF WW is extremely resistant to rust and corrosion and is ideally suited for use in high-moisture areas, including subsea applications. Applications The nonplating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high. Specially formulated and developed for subsea or other conditions where extreme water resistance is necessary. Not recommended for oxygen service. Service Rating -25°F to 450°F -32°C to 230°C -
36924 – JET-LUBE ALCO-EP ECF WATER WELL 120 lb. drum
$0.93JET-LUBE ALCO-EP ECF™ WATER WELL is a premium, state-of-the-art, multipurpose calcium sulfonate complex grease thickening a blend of synthetic oils selected to provide the level of biodegradation required to meet the Norwegian “Yellow” and the combined UK and Netherlands “E” categories. These are the most safe environmental ratings for a lubricating grease. The non-plating, organic EP/anti-wear additives allow ALCO-EP ECF WW to be used where tolerances are low and/or speeds are high. BENEFITS of using JET-LUBE ALCO-EP ECF WATER WELL Superior rust and corrosion protection Dropping Point of 550°F (260°C) Biodegradable ALCO-EP ECF WW contains polymer additives, further enhancing the inherent water resistance of a calcium complex- based grease. ALCO-EP ECF WW is extremely resistant to rust and corrosion and is ideally suited for use in high-moisture areas, including subsea applications. Applications The nonplating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high. Specially formulated and developed for subsea or other conditions where extreme water resistance is necessary. Not recommended for oxygen service. Service Rating -25°F to 450°F -32°C to 230°C -
36929 – JET-LUBE ALCO-EP ECF WATER WELL 400 lb. drum
$0.93JET-LUBE ALCO-EP ECF™ WATER WELL is a premium, state-of-the-art, multipurpose calcium sulfonate complex grease thickening a blend of synthetic oils selected to provide the level of biodegradation required to meet the Norwegian “Yellow” and the combined UK and Netherlands “E” categories. These are the most safe environmental ratings for a lubricating grease. The non-plating, organic EP/anti-wear additives allow ALCO-EP ECF WW to be used where tolerances are low and/or speeds are high. BENEFITS of using JET-LUBE ALCO-EP ECF WATER WELL Superior rust and corrosion protection Dropping Point of 550°F (260°C) Biodegradable ALCO-EP ECF WW contains polymer additives, further enhancing the inherent water resistance of a calcium complex- based grease. ALCO-EP ECF WW is extremely resistant to rust and corrosion and is ideally suited for use in high-moisture areas, including subsea applications. Applications The nonplating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high. Specially formulated and developed for subsea or other conditions where extreme water resistance is necessary. Not recommended for oxygen service. Service Rating -25°F to 450°F -32°C to 230°C -
37006 – Jet-Lube ALCO-EP ECF 5 lb can
$0.93Extreme Pressure Grease - Environmental Formula Jet-Lube ALCO-EP ECF is a premium, state-of-the-art, multipurpose complex grease thickening with a blend of synthetic and vegetable oils selected to provide the level of biodegradation required to meet the Norwegian Yellow and the combined UK and Netherlands E categories. The non-plating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high. ALCO-EP ECF also contains polymer additives, further enhancing the inherent water resistance of complex based grease. It is extremely resistant to rust and corrosion. Benefits of using Jet-Lube ALCO-EP ECF Non-plating, organic EP / Anti-wear additives Contains polymer additives Water-resistant Superior rust & corrosion protection Biodegradable Specifications of 37006 Jet-Lube ALCO-EP ECF 5 lb can Base Materials: Complex / Synthetic & Vegetable Oils Certifications: Eco-Certified, Environmental Rating: UK CEFAS OCNS Group E, MIL-G-18458B-SH, EU certification/registrations: - Norway – Yellow - Netherlands & UK: E - Denmark PR#: 2324093 Service Rating: -10°F to 450°F, -23°C to 232°C TDS SDS -
37016 – ALCO-EP™
$382.49Extreme Pressure Multipurpose Grease w/ MoS2 ALCO-EP 5 GAL. PAIL is a versatile aluminum complex grease with a high level of rust and oxidation inhibitors. ALCO-EP™ contains molybdenum disulfide (MoS2) and graphite, which plate out to resist metal-to-metal contact in boundary modes of lubrication. ALCO-EP provides superior wear protection against extreme pressure and is highly water resistant. Its 60-pound rating in the Timken load test proves ALCO-EP to have excellent load-carrying ability. Ideal for anti-friction bearings. Benefits of using Alco-EP™ Excellent work stability under high loads, shock, & vibration Highly water-resistant Rust & corrosion inhibitors High strength fluid film Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications: Base Materials: Aluminum Complex / Lubricating Oils Service Rating: -25°F to 450°F, -32°C to 232°C -
37024 – ALCO-EP™
$1,083.33Extreme Pressure Multipurpose Grease w/ MoS2 ALCO-EP 15 GAL. DRUM is a versatile aluminum complex grease with a high level of rust and oxidation inhibitors. ALCO-EP™ contains molybdenum disulfide (MoS2) and graphite, which plate out to resist metal-to-metal contact in boundary modes of lubrication. ALCO-EP provides superior wear protection against extreme pressure and is highly water resistant. Its 60-pound rating in the Timken load test proves ALCO-EP to have excellent load-carrying ability. Ideal for anti-friction bearings. Benefits of using Alco-EP™ Excellent work stability under high loads, shock, & vibration Highly water-resistant Rust & corrosion inhibitors High strength fluid film Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications: Base Materials: Aluminum Complex / Lubricating Oils Service Rating: -25°F to 450°F, -32°C to 232°C -
37029 – ALCO-EP™
$4,105.77Extreme Pressure Multipurpose Grease w/ MoS2 ALCO-EP 50 GAL. DRUM is a versatile aluminum complex grease with a high level of rust and oxidation inhibitors. ALCO-EP™ contains molybdenum disulfide (MoS2) and graphite, which plate out to resist metal-to-metal contact in boundary modes of lubrication. ALCO-EP provides superior wear protection against extreme pressure and is highly water resistant. Its 60-pound rating in the Timken load test proves ALCO-EP to have excellent load-carrying ability. Ideal for anti-friction bearings. Benefits of using Alco-EP™ Excellent work stability under high loads, shock, & vibration Highly water-resistant Rust & corrosion inhibitors High strength fluid film Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications: Base Materials: Aluminum Complex / Lubricating Oils Service Rating: -25°F to 450°F, -32°C to 232°C -
37050 – ALCO-EP™
$12.70Extreme Pressure Multipurpose Grease w/ MoS2 Jet-Lube ALCO-EP 5 GAL. PAIL is a versatile aluminum complex grease with a high level of rust and oxidation inhibitors. ALCO-EP™ contains molybdenum disulfide (MoS2) and graphite, which plate out to resist metal-to-metal contact in boundary modes of lubrication. ALCO-EP provides superior wear protection against extreme pressure and is highly water resistant. Its 60-pound rating in the Timken load test proves ALCO-EP to have excellent load-carrying ability. Ideal for anti-friction bearings. Benefits of using Alco-EP™ Excellent work stability under high loads, shock, & vibration Highly water-resistant Rust & corrosion inhibitors High strength fluid film Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications of 37050 ALCO-EP™ Base Materials: Aluminum Complex / Lubricating Oils Service Rating: -25°F to 450°F, -32°C to 232°C TDS SDS -
37124 – ALCO-EP™ ECF™
$1,471.37Extreme Pressure Grease - Environmental Formula Jet-Lube ALCO-EP ECF is a premium, state-of-the-art, multipurpose complex grease thickening with a blend of synthetic and vegetable oils selected to provide the level of biodegradation required to meet the Norwegian Yellow and the combined UK and Netherlands E categories. The non-plating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high. ALCO-EP ECF also contains polymer additives, further enhancing the inherent water resistance of complex based grease. It is extremely resistant to rust and corrosion. Benefits of using Jet-Lube ALCO-EP ECF Non-plating, organic EP / Anti-wear additives Contains polymer additives Water-resistant Superior rust & corrosion protection Biodegradable Specifications of 37124 ALCO-EP™ ECF™ Base Materials: Complex / Synthetic & Vegetable OilsCertifications: Eco-Certified, Environmental Rating: UK CEFAS OCNS Group E, MIL-G-18458B-SH, EU certification/registrations: - Norway – Yellow- Netherlands & UK: E- Denmark PR#: 2324093Service Rating: -10°F to 450°F, -23°C to 232°C TDS SDS -
37129 – ALCO-EP™ ECF™
$4,057.13Extreme Pressure Grease - Environmental Formula Jet-Lube ALCO-EP ECF is a premium, state-of-the-art, multipurpose complex grease thickening with a blend of synthetic and vegetable oils selected to provide the level of biodegradation required to meet the Norwegian Yellow and the combined UK and Netherlands E categories. The non-plating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high. ALCO-EP ECF also contains polymer additives, further enhancing the inherent water resistance of complex based grease. It is extremely resistant to rust and corrosion. Benefits of using Jet-Lube ALCO-EP ECF Non-plating, organic EP / Anti-wear additives Contains polymer additives Water-resistant Superior rust & corrosion protection Biodegradable Specifications of 37129 ALCO-EP™ ECF™ Base Materials: Complex / Synthetic & Vegetable OilsCertifications: Eco-Certified, Environmental Rating: UK CEFAS OCNS Group E, MIL-G-18458B-SH, EU certification/registrations: - Norway – Yellow- Netherlands & UK: E- Denmark PR#: 2324093Service Rating: -10°F to 450°F, -23°C to 232°C TDS SDS -
37150 – ALCO-EP™ ECF™
$15.96ALCO-EP ECF contains polymer additives, further enhancing the inherent water resistance of a calcium complex- based grease. ALCO-EP ECF is extremely resistant to rust and corrosion and is ideally suited for use in high-moisture areas, including subsea applications. -
37341 – 769 LUBRICANT®
$13.51Lubricant & Penetrant - NSF H2 Jet-Lube 769 LUBRICANT® is the leading multipurpose, penetrating, lubricating, moisture displacing and corrosion preventative product for use where salt water, salt spray or other harsh environments are present. 769 Lubricant gives total performance while being environmentally safe, easy to use and non-flammable. Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils that provide superior lubricating protection and antiwear properties. Penetrates: Rusted and frozen metal parts studs, nuts, screws, pins, linkages are easily loosened by means of superior creepability. Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin non-greasy film that prevents additional moisture from clinging or entering. Prevents Rust & Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments. Benefits of using 769 Lubricant® Non-flammable Multipurpose Non-evaporating Contains no fluorocarbons Never hardens or dries out Contains no silicones Specifications of 37341 769 LUBRICANT® Base Materials: Clear Amber FluidCertifications: NSF H2 Registered #137551 (Bulk), #137644 (Aerosol), MIL-PRF-81309H (Aerosol) Type II & III, Class II, CO2 Grade MIL-PRF-81309H (Bulk) Type II & III, Class I MIL-C-16173E Grade 3 MIL-C-23411A VV-P-216B CID A-A-50493C Class B Type I TDSSDS (Aerosol)SDS -
37343 – 769 LUBRICANT®
$21.25Lubricant & Penetrant - NSF H2 Jet-Lube 769 LUBRICANT® is the leading multipurpose, penetrating, lubricating, moisture displacing and corrosion preventative product for use where salt water, salt spray or other harsh environments are present. 769 Lubricant gives total performance while being environmentally safe, easy to use and non-flammable. Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils that provide superior lubricating protection and antiwear properties. Penetrates: Rusted and frozen metal parts studs, nuts, screws, pins, linkages are easily loosened by means of superior creepability. Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin non-greasy film that prevents additional moisture from clinging or entering. Prevents Rust & Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments. Benefits of using 769 Lubricant® Non-flammable Multipurpose Non-evaporating Contains no fluorocarbons Never hardens or dries out Contains no silicones Specifications of 37343 769 LUBRICANT® Base Materials: Clear Amber FluidCertifications: NSF H2 Registered #137551 (Bulk), #137644 (Aerosol), MIL-PRF-81309H (Aerosol) Type II & III, Class II, CO2 Grade MIL-PRF-81309H (Bulk) Type II & III, Class I MIL-C-16173E Grade 3 MIL-C-23411A VV-P-216B CID A-A-50493C Class B Type I TDSSDS (Aerosol)SDS -
38429 – JET-LUBE RISER BOLT LUBE 600 lb drum
$0.93JET-LUBE SILICONE COMPOUND DM is a premium silicone compound for use in a wide variety of applications. Its low volatility, non-melting thickener and high dielectric strength make it the compound of choice for moisture proofing ignition systems, spark plug connections, electrical assemblies, cable and battery terminals and other similar applications. BENEFITS: Has no dropping point Excellent work stability under high loads Highly water resistant High strength fluid film Silicone emulsion Pumpable formula Direct Comparison to Dow Corning® 111 Dielectric strength-500volts Valve lubricant Temkin Load – 65 Lbs. Water Resistant Nontoxic SILICONE COMPOUND DM is a dielectric, translucent paste that provides excellent lubrication and sealing properties for plug and gate valves, stuffing boxes, o-rings, vacuum and pressure systems. The low volatility and inert properties allow it to be used on a wide range of elastomers and plastics. It is not recommended for use on surfaces to be painted. Applications Ideally suited as an insulator for electrical connectors against the elements. Thyrotrophic gel acts as a water proofing agent and O-ring lubricant for instrumentation boxes, motor covers, air intakes, and vacuum systems. Use to protect ignition systems, spark plug connections, electrical assemblies, cable and battery terminals from moisture. Not recommended for surfaces to be painted. Service Rating -70°F to 400°F -57°C to 204°C SDS TDS -
39529 – MAGIC WRENCH®
$4,039.89Super Penetrant - NSF H1 Jet-Lube MAGIC WRENCH® attacks rust and corrosion quickly and safely to free corroded parts, loosen nuts and aids in the disassembly of mechanical components. MAGIC WRENCH's versatile semi-synthetic formula penetrates, lubricates, removes moisture and protects chains, cables, slides and other moving parts. Benefits of using MAGIC WRENCH® Synthetic fluids Biodegradable Safe on metal & plastic Low VOC's Silicone-free Ozone safe Non-flammable Non-evaporative Specifications of 39529 MAGIC WRENCH® Base Materials: Ester, White Oils / SyntheticsCertifications: NSF Registered H-1 Aerosol Reg#048230 Bulk Reg.#048231Service Rating: -40°F to 350°F, -40°C to 177°C TDS (Aerosol)TDS SDS (Aerosol)SDS -
39535 – MAGIC WRENCH®
$396.84Super Penetrant - NSF H1 Jet-Lube MAGIC WRENCH® attacks rust and corrosion quickly and safely to free corroded parts, loosen nuts and aids in the disassembly of mechanical components. MAGIC WRENCH's versatile semi-synthetic formula penetrates, lubricates, removes moisture and protects chains, cables, slides and other moving parts. Benefits of using MAGIC WRENCH® Synthetic fluids Biodegradable Safe on metal & plastic Low VOC's Silicone-free Ozone safe Non-flammable Non-evaporative Specifications of 39535 MAGIC WRENCH® Base Materials: Ester, White Oils / Synthetics Certifications: NSF Registered H-1 Aerosol Reg#048230 Bulk Reg.#048231 Service Rating: -40°F to 350°F, -40°C to 177°C TDS (Aerosol) TDS SDS (Aerosol) SDS -
39541 – MAGIC WRENCH®
$15.49Super Penetrant - NSF H1 Jet-Lube MAGIC WRENCH® attacks rust and corrosion quickly and safely to free corroded parts, loosen nuts and aids in the disassembly of mechanical components. MAGIC WRENCH's versatile semi-synthetic formula penetrates, lubricates, removes moisture and protects chains, cables, slides and other moving parts. Benefits of using MAGIC WRENCH® Synthetic fluids Biodegradable Safe on metal & plastic Low VOC's Silicone-free Ozone safe Non-flammable Non-evaporative Specifications of 39541 MAGIC WRENCH® Base Materials: Ester, White Oils / Synthetics Certifications: NSF Registered H-1 Aerosol Reg#048230 Bulk Reg.#048231 Service Rating: -40°F to 350°F, -40°C to 177°C TDS (Aerosol) TDS SDS (Aerosol) SDS -
39543 – MAGIC WRENCH®
$14.16Super Penetrant - NSF H1 Jet-Lube MAGIC WRENCH® attacks rust and corrosion quickly and safely to free corroded parts, loosen nuts and aids in the disassembly of mechanical components. MAGIC WRENCH's versatile semi-synthetic formula penetrates, lubricates, removes moisture and protects chains, cables, slides and other moving parts. Benefits of using MAGIC WRENCH® Synthetic fluids Biodegradable Safe on metal & plastic Low VOC's Silicone-free Ozone safe Non-flammable Non-evaporative Specifications of 39543 MAGIC WRENCH® Base Materials: Ester, White Oils / Synthetics Certifications: NSF Registered H-1 Aerosol Reg#048230 Bulk Reg.#048231 Service Rating: -40°F to 350°F, -40°C to 177°C TDS (Aerosol) TDS SDS (Aerosol) SDS -
47102 – 550® EXTREME®
$16.22Anti-Seize & Thread Lubricant 550 EXTREME 1/2 lb brush top of Jet-Lube is an enhanced formulation that uses a balance of molybdenum disulfide and surface modified synthetic graphite in a corrosion resistant calcium sulfonate complex base combined to provide protection for a wide variety of applications over a wide temperature range. 550 EXTREME is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 EXTREME eases assembling and dismantling saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. 550 EXTREME utilizes a complex base grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 Extreme. As an added benefit, when compared to anti-seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 EXTREME is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torquing bolts are between 250°-400°F. Benefits No VOC's When used in tandem with graphite stem packings improves conformance to API 622 Low “E” criteria Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications Base Materials: Calcium Sulfonate / Petroleum Friction / Nut-Factor: (Nut-Factor) Uncoated B7 Studs @ 80 ksi - 0.17, (Nut-Factor) Uncoated B8M & Stainless Studs - 0.20 Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type III Service Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -10°F (-23°C), Static Applications: -265°F (-165°C)** ( **Based on component literature data in cryogenic applications.) TDS SDS -
47104 – Jet-Lube 550® EXTREME®
$27.08Jet-Lube 550 Extreme Anti-Seize & Thread Lubricant An enhanced formulation that uses a balance of molybdenum disulfide and surface modified synthetic graphite in a corrosion resistant calcium sulfonate complex base combined to provide protection for a wide variety of applications over a wide temperature range. 550 EXTREME is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 EXTREME eases assembling and dismantling saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. 550 EXTREME utilizes a complex base grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 Extreme. As an added benefit, when compared to anti-seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 EXTREME is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torqueing bolts are between 250°-400°F. Benefits of using 550®Extreme® No VOC's When used in tandem with graphite stem packings improves conformance to API 622 Low “E” criteria Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications of 47102 550® EXTREME® Base Materials: Complex / Petroleum Friction / Nut-Factor: (Nut-Factor) Uncoated B7 Studs @ 80 ksi - 0.17, (Nut-Factor) Uncoated B8M & Stainless Studs - 0.20 Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type III Service Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -10°F (-23°C), Static Applications: -265°F (-165°C)** ( **Based on component literature data in cryogenic applications.) TDS SDS -
47113 – 550® EXTREME®
$721.03Anti-Seize & Thread Lubricant Jet-Lube 550 EXTREME is an enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined offering maximum protection against seizure and heat-freeze, eases assembling and dismantling, and saves man hours. 550® Extreme® protects against rust, oxidation and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. It contains no VOC’s and has low “E” (Emissions) technology, making it the ideal product for petrochemical plants and valve maintenance needs. Benefits of using 550®Extreme® No VOC's Low "E" (Emission) Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications of 47113 550® EXTREME® Base Materials: Complex / Petroleum Friction / K-Factor: 0.17 Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type III Service Rating: -65°F to 2400°F, -54°C to 1316°C TDS SDS -
47129 – 550® EXTREME®
$5,079.96Anti-Seize & Thread Lubricant Jet-Lube 550 EXTREME is an enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined offering maximum protection against seizure and heat-freeze, eases assembling and dismantling, and saves man hours. 550® Extreme® protects against rust, oxidation and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. It contains no VOC’s and has low “E” (Emissions) technology, making it the ideal product for petrochemical plants and valve maintenance needs. Benefits of using 550®Extreme® No VOC's Low "E" (Emission) Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications of 47129 550® EXTREME® Base Materials: Complex / Petroleum Friction / K-Factor: 0.17 Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type III Service Rating: -65°F to 2400°F, -54°C to 1316°C TDS SDS -
47161 – 550 EXTREME
$26.47Anti-Seize & Thread Lubricant Jet-Lube 550 Extreme is an enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined offering maximum protection against seizure and heat-freeze, eases assembling and dismantling, and saves man hours. 550® Extreme® protects against rust, oxidation and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. It contains no VOC’s and has low “E” (Emissions) technology, making it the ideal product for petrochemical plants and valve maintenance needs. Benefits of using 550®Extreme® No VOC's Low "E" (Emission) Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications of 47161 550 EXTREME Base Materials: Complex / Petroleum Friction / K-Factor: 0.17Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type IIIService Rating: -65°F to 2400°F, -54°C to 1316°C TDS SDS -
49702 – MARINE GRADE ANTI-SEIZE
$16.05Nonmetallic Anti-Seize & Thread Lubricant Jet-Lube MARINE GRADE ANTI-SEIZE is a non-conductive, non-metallic blend of anti-friction materials specially formulated to meet the new requirements for marine and offshore environments. MARINE GRADE ANTI-SEIZE falls within the range of environmentally preferable lubricants for use as a best management practice (BMP) by operators of vessels covered under the Vessel General Permit for Discharges Incidental to the Normal Operation of Vessels (VGP). It meets the requirements for environmentally acceptable lubricant (EAL) as used to describe those lubricants which have been demonstrated to meet standards for biodegradability, toxicity and bioaccumulation potential that minimize their likely adverse consequences in the aquatic environment when compared to conventional lubricants. MARINE GRADE ANTI-SEIZE is specifically selected to reduce the potential for galvanic corrosion and protect sensitive or galling prone alloys such as chrome and Inconel. These fill the voids and imperfections on the surface shielding sliding components of interference making assembly and disassembly easy without damage to the nut or bolt. BENEFITS of MARINE GRADE ANTI-SEIZE No metallic components Highly water-resistant Extreme temperature - Suited for high humidity offshore environments High film strength Non-conductive No VOC's Environmentally safe Specifications of 49702 MARINE GRADE ANTI-SEIZE Base Materials: Complex Blend / Synthetic & Vegetable OilsFriction / K-Factor: 0.15Certifications: MIL-PRF-907F, OSPAR compliant, registered by both CEFAS in the UK and KPD/SFT in Norway, Not considered a marine pollutant, ECO-Compliant TDS SDS -
49704 – MARINE GRADE ANTI-SEIZE
$24.28Nonmetallic Anti-Seize & Thread Lubricant Jet-Lube MARINE GRADE ANTI-SEIZE is a non-conductive, non-metallic blend of anti-friction materials specially formulated to meet the new requirements for marine and offshore environments. MARINE GRADE ANTI-SEIZE falls within the range of environmentally preferable lubricants for use as a best management practice (BMP) by operators of vessels covered under the Vessel General Permit for Discharges Incidental to the Normal Operation of Vessels (VGP). It meets the requirements for environmentally acceptable lubricant (EAL) as used to describe those lubricants which have been demonstrated to meet standards for biodegradability, toxicity and bioaccumulation potential that minimize their likely adverse consequences in the aquatic environment when compared to conventional lubricants. MARINE GRADE ANTI-SEIZE is specifically selected to reduce the potential for galvanic corrosion and protect sensitive or galling prone alloys such as chrome and Inconel. These fill the voids and imperfections on the surface shielding sliding components of interference making assembly and disassembly easy without damage to the nut or bolt. BENEFITS of MARINE GRADE ANTI-SEIZE No metallic components Highly water-resistant Extreme temperature - Suited for high humidity offshore environments High film strength Non-conductive No VOC's Environmentally safe Specifications of 49704 MARINE GRADE ANTI-SEIZE Base Materials: Complex Blend / Synthetic & Vegetable Oils Friction / K-Factor: 0.15 Certifications: MIL-PRF-907F, OSPAR compliant, registered by both CEFAS in the UK and KPD/SFT in Norway, Not considered a marine pollutant, ECO-Compliant TDS SDS