Jet-Lube
Showing 316–360 of 626 results
-
Sale!
36929 – JET-LUBE ALCO-EP ECF WATER WELL 400 lb. drum
Original price was: $1.03.$0.93Current price is: $0.93.JET-LUBE ALCO-EP ECF™ WATER WELL is a premium, state-of-the-art, multipurpose calcium sulfonate complex grease thickening a blend of synthetic oils selected to provide the level of biodegradation required to meet the Norwegian “Yellow” and the combined UK and Netherlands “E” categories. These are the most safe environmental ratings for a lubricating grease. The non-plating, organic EP/anti-wear additives allow ALCO-EP ECF WW to be used where tolerances are low and/or speeds are high. BENEFITS of using JET-LUBE ALCO-EP ECF WATER WELL Superior rust and corrosion protection Dropping Point of 550°F (260°C) Biodegradable ALCO-EP ECF WW contains polymer additives, further enhancing the inherent water resistance of a calcium complex- based grease. ALCO-EP ECF WW is extremely resistant to rust and corrosion and is ideally suited for use in high-moisture areas, including subsea applications. Applications The nonplating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high. Specially formulated and developed for subsea or other conditions where extreme water resistance is necessary. Not recommended for oxygen service. Service Rating -25°F to 450°F -32°C to 230°C -
Sale!
37006 – Jet-Lube ALCO-EP ECF 5 lb can
Original price was: $1.03.$0.93Current price is: $0.93.Extreme Pressure Grease - Environmental Formula Jet-Lube ALCO-EP ECF is a premium, state-of-the-art, multipurpose complex grease thickening with a blend of synthetic and vegetable oils selected to provide the level of biodegradation required to meet the Norwegian Yellow and the combined UK and Netherlands E categories. The non-plating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high. ALCO-EP ECF also contains polymer additives, further enhancing the inherent water resistance of complex based grease. It is extremely resistant to rust and corrosion. Benefits of using Jet-Lube ALCO-EP ECF Non-plating, organic EP / Anti-wear additives Contains polymer additives Water-resistant Superior rust & corrosion protection Biodegradable Specifications of 37006 Jet-Lube ALCO-EP ECF 5 lb can Base Materials: Complex / Synthetic & Vegetable Oils Certifications: Eco-Certified, Environmental Rating: UK CEFAS OCNS Group E, MIL-G-18458B-SH, EU certification/registrations: - Norway – Yellow - Netherlands & UK: E - Denmark PR#: 2324093 Service Rating: -10°F to 450°F, -23°C to 232°C TDS SDS -
Sale!
37016 – Jet-Lube Alco-Ep 35 lb Pail
Original price was: $531.25.$478.12Current price is: $478.12.Extreme Pressure Multipurpose Grease w/ MoS2 ALCO-EP 5 GAL. PAIL is a versatile aluminum complex grease with a high level of rust and oxidation inhibitors. ALCO-EP™ contains molybdenum disulfide (MoS2) and graphite, which plate out to resist metal-to-metal contact in boundary modes of lubrication. ALCO-EP provides superior wear protection against extreme pressure and is highly water resistant. Its 60-pound rating in the Timken load test proves ALCO-EP to have excellent load-carrying ability. Ideal for anti-friction bearings. Benefits of using Alco-EP™ Excellent work stability under high loads, shock, & vibration Highly water-resistant Rust & corrosion inhibitors High strength fluid film Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications: Base Materials: Aluminum Complex / Lubricating Oils Service Rating: -25°F to 450°F, -32°C to 232°C -
Sale!
37024 – Jet-Lube Alco-Ep 120 lb Keg
Original price was: $1,504.61.$1,354.15Current price is: $1,354.15.Extreme Pressure Multipurpose Grease w/ MoS2 ALCO-EP 15 GAL. DRUM is a versatile aluminum complex grease with a high level of rust and oxidation inhibitors. ALCO-EP™ contains molybdenum disulfide (MoS2) and graphite, which plate out to resist metal-to-metal contact in boundary modes of lubrication. ALCO-EP provides superior wear protection against extreme pressure and is highly water resistant. Its 60-pound rating in the Timken load test proves ALCO-EP to have excellent load-carrying ability. Ideal for anti-friction bearings. Benefits of using Alco-EP™ Excellent work stability under high loads, shock, & vibration Highly water-resistant Rust & corrosion inhibitors High strength fluid film Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications: Base Materials: Aluminum Complex / Lubricating Oils Service Rating: -25°F to 450°F, -32°C to 232°C -
Sale!
37029 – Jet-Lube Alco-Ep 400 lb Drum – Lined
Original price was: $5,702.48.$5,132.23Current price is: $5,132.23.Extreme Pressure Multipurpose Grease w/ MoS2 ALCO-EP 50 GAL. DRUM is a versatile aluminum complex grease with a high level of rust and oxidation inhibitors. ALCO-EP™ contains molybdenum disulfide (MoS2) and graphite, which plate out to resist metal-to-metal contact in boundary modes of lubrication. ALCO-EP provides superior wear protection against extreme pressure and is highly water resistant. Its 60-pound rating in the Timken load test proves ALCO-EP to have excellent load-carrying ability. Ideal for anti-friction bearings. Benefits of using Alco-EP™ Excellent work stability under high loads, shock, & vibration Highly water-resistant Rust & corrosion inhibitors High strength fluid film Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications: Base Materials: Aluminum Complex / Lubricating Oils Service Rating: -25°F to 450°F, -32°C to 232°C -
Sale!
37050 – Jet-Lube Alco-Ep 14 oz Cartridge
Price range: $15.87 through $476.01Extreme Pressure Multipurpose Grease w/ MoS2 Jet-Lube ALCO-EP 5 GAL. PAIL is a versatile aluminum complex grease with a high level of rust and oxidation inhibitors. ALCO-EP™ contains molybdenum disulfide (MoS2) and graphite, which plate out to resist metal-to-metal contact in boundary modes of lubrication. ALCO-EP provides superior wear protection against extreme pressure and is highly water resistant. Its 60-pound rating in the Timken load test proves ALCO-EP to have excellent load-carrying ability. Ideal for anti-friction bearings. Benefits of using Alco-EP™ Excellent work stability under high loads, shock, & vibration Highly water-resistant Rust & corrosion inhibitors High strength fluid film Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications of 37050 ALCO-EP™ Base Materials: Aluminum Complex / Lubricating Oils Service Rating: -25°F to 450°F, -32°C to 232°C TDS SDS -
Sale!
37116 – Jet-Lube Alco-Ep Ecf 35 lb Pail
Original price was: $720.48.$648.43Current price is: $648.43.Extreme Pressure Grease - Environmental Formula Jet-Lube ALCO-EP ECF is a premium, state-of-the-art, multipurpose complex grease thickening with a blend of synthetic and vegetable oils selected to provide the level of biodegradation required to meet the Norwegian Yellow and the combined UK and Netherlands E categories. The non-plating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high. ALCO-EP ECF also contains polymer additives, further enhancing the inherent water resistance of complex based grease. It is extremely resistant to rust and corrosion. Benefits of using Jet-Lube ALCO-EP ECF Non-plating, organic EP / Anti-wear additives Contains polymer additives Water-resistant Superior rust & corrosion protection Biodegradable Specifications of 37116 Jet-Lube ALCO-EP ECF 16 KG PAIL Base Materials: Complex / Synthetic & Vegetable Oils Certifications: Eco-Certified, Environmental Rating: UK CEFAS OCNS Group E, MIL-G-18458B-SH, EU certification/registrations: - Norway – Yellow - Netherlands & UK: E - Denmark PR#: 2324093 Service Rating: -10°F to 450°F, -23°C to 232°C TDS SDS -
Sale!
37124 – Jet-Lube Alco-Ep Ecf 120 lb Keg
Original price was: $2,043.57.$1,839.21Current price is: $1,839.21.Extreme Pressure Grease - Environmental Formula Jet-Lube ALCO-EP ECF is a premium, state-of-the-art, multipurpose complex grease thickening with a blend of synthetic and vegetable oils selected to provide the level of biodegradation required to meet the Norwegian Yellow and the combined UK and Netherlands E categories. The non-plating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high. ALCO-EP ECF also contains polymer additives, further enhancing the inherent water resistance of complex based grease. It is extremely resistant to rust and corrosion. Benefits of using Jet-Lube ALCO-EP ECF Non-plating, organic EP / Anti-wear additives Contains polymer additives Water-resistant Superior rust & corrosion protection Biodegradable Specifications of 37124 ALCO-EP™ ECF™ Base Materials: Complex / Synthetic & Vegetable OilsCertifications: Eco-Certified, Environmental Rating: UK CEFAS OCNS Group E, MIL-G-18458B-SH, EU certification/registrations: - Norway – Yellow- Netherlands & UK: E- Denmark PR#: 2324093Service Rating: -10°F to 450°F, -23°C to 232°C TDS SDS -
Sale!
37129 – Jet-Lube Alco-Ep Ecf 400 lb Drum
Original price was: $5,634.91.$5,071.42Current price is: $5,071.42.Extreme Pressure Grease - Environmental Formula Jet-Lube ALCO-EP ECF is a premium, state-of-the-art, multipurpose complex grease thickening with a blend of synthetic and vegetable oils selected to provide the level of biodegradation required to meet the Norwegian Yellow and the combined UK and Netherlands E categories. The non-plating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high. ALCO-EP ECF also contains polymer additives, further enhancing the inherent water resistance of complex based grease. It is extremely resistant to rust and corrosion. Benefits of using Jet-Lube ALCO-EP ECF Non-plating, organic EP / Anti-wear additives Contains polymer additives Water-resistant Superior rust & corrosion protection Biodegradable Specifications of 37129 ALCO-EP™ ECF™ Base Materials: Complex / Synthetic & Vegetable OilsCertifications: Eco-Certified, Environmental Rating: UK CEFAS OCNS Group E, MIL-G-18458B-SH, EU certification/registrations: - Norway – Yellow- Netherlands & UK: E- Denmark PR#: 2324093Service Rating: -10°F to 450°F, -23°C to 232°C TDS SDS -
Sale!
37150 – Jet-Lube Alco-Ep Ecf 14 oz Cartridge
Price range: $19.94 through $598.32ALCO-EP ECF contains polymer additives, further enhancing the inherent water resistance of a calcium complex- based grease. ALCO-EP ECF is extremely resistant to rust and corrosion and is ideally suited for use in high-moisture areas, including subsea applications. -
Sale!
37341 – Jet-Lube 769 Lubricant 12 oz Aerosol
Price range: $16.89 through $202.72Lubricant & Penetrant - NSF H2 Jet-Lube 769 LUBRICANT® is the leading multipurpose, penetrating, lubricating, moisture displacing and corrosion preventative product for use where salt water, salt spray or other harsh environments are present. 769 Lubricant gives total performance while being environmentally safe, easy to use and non-flammable. Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils that provide superior lubricating protection and antiwear properties. Penetrates: Rusted and frozen metal parts studs, nuts, screws, pins, linkages are easily loosened by means of superior creepability. Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin non-greasy film that prevents additional moisture from clinging or entering. Prevents Rust & Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments. Benefits of using 769 Lubricant® Non-flammable Multipurpose Non-evaporating Contains no fluorocarbons Never hardens or dries out Contains no silicones Specifications of 37341 769 LUBRICANT® Base Materials: Clear Amber FluidCertifications: NSF H2 Registered #137551 (Bulk), #137644 (Aerosol), MIL-PRF-81309H (Aerosol) Type II & III, Class II, CO2 Grade MIL-PRF-81309H (Bulk) Type II & III, Class I MIL-C-16173E Grade 3 MIL-C-23411A VV-P-216B CID A-A-50493C Class B Type I TDSSDS (Aerosol)SDS -
Sale!
37343 – Jet-Lube 769 Lubricant 16 oz Spray Bottle
Price range: $26.55 through $318.60Lubricant & Penetrant - NSF H2 Jet-Lube 769 LUBRICANT® is the leading multipurpose, penetrating, lubricating, moisture displacing and corrosion preventative product for use where salt water, salt spray or other harsh environments are present. 769 Lubricant gives total performance while being environmentally safe, easy to use and non-flammable. Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils that provide superior lubricating protection and antiwear properties. Penetrates: Rusted and frozen metal parts studs, nuts, screws, pins, linkages are easily loosened by means of superior creepability. Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin non-greasy film that prevents additional moisture from clinging or entering. Prevents Rust & Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments. Benefits of using 769 Lubricant® Non-flammable Multipurpose Non-evaporating Contains no fluorocarbons Never hardens or dries out Contains no silicones Specifications of 37343 769 LUBRICANT® Base Materials: Clear Amber FluidCertifications: NSF H2 Registered #137551 (Bulk), #137644 (Aerosol), MIL-PRF-81309H (Aerosol) Type II & III, Class II, CO2 Grade MIL-PRF-81309H (Bulk) Type II & III, Class I MIL-C-16173E Grade 3 MIL-C-23411A VV-P-216B CID A-A-50493C Class B Type I TDSSDS (Aerosol)SDS -
Sale!
37716 – Jet-Lube Alco-Ep 73 Plus 35 lb Pail
Original price was: $457.17.$411.45Current price is: $411.45.Extreme Pressure Multipurpose Grease Jet-Lube ALCO-EP-73 PLUS is a premium, state-of-the-art, multipurpose aluminum complex grease containing a highly synergistic blend of rust and oxidation inhibitors plus extreme pressure and anti-wear additives for maximum performance characteristics. The non-plating, organic EP/anti-wear additives allow ALCO-EP-73 PLUS™ to be used where tolerances are low and/or speeds are high. ALCO-EP-73 PLUS also contains polymer additives; further enhancing the inherent water resistance of an aluminum-complex-based grease. It is extremely resistant to rust and corrosion and ideally suited for use in high-moisture areas, including subsea applications. Benefits of using Alco-EP-73 Plus™ High strength fluid film Extreme resistance to rust & corrosion Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications of Jet-Lube ALCO-EP-73 PLUS 35 LB. PAIL Base Materials: Aluminum Complex / Lubricating Oils Certifications: MIL-G-18458B-SH Service Rating: -25°F to 450°F, -32°C to 232°C TDS SDS Which smaller Alco-EP 73 Plus sizes can you buy?You do not have to buy a full pail. PE Energy stocks the same Alco-EP 73 Plus formula in smaller packs, priced and ready to order online:37750 - Jet-Lube Alco-Ep 73 Plus 14 oz Cartridge — $14.17 Can you order a single pail of Jet-Lube Alco-EP 73 Plus?Yes. PE Energy supplies Jet-Lube Alco-EP 73 Plus in any quantity, from one pail to a full pallet, shipped from Houston stock. Request a quote for 37716 (35 lb pail) and you get a same-day reply on stock items, with freight included in the quote. -
Sale!
37724 – Jet-Lube Alco-Ep 73 Plus 120 lb Keg
Original price was: $1,615.90.$1,454.31Current price is: $1,454.31.Extreme Pressure Multipurpose Grease Jet-Lube ALCO-EP-73 PLUS is a premium, state-of-the-art, multipurpose aluminum complex grease containing a highly synergistic blend of rust and oxidation inhibitors plus extreme pressure and anti-wear additives for maximum performance characteristics. The non-plating, organic EP/anti-wear additives allow ALCO-EP-73 PLUS™ to be used where tolerances are low and/or speeds are high. ALCO-EP-73 PLUS also contains polymer additives; further enhancing the inherent water resistance of an aluminum-complex-based grease. It is extremely resistant to rust and corrosion and ideally suited for use in high-moisture areas, including subsea applications. Benefits of using Alco-EP-73 Plus™ High strength fluid film Extreme resistance to rust & corrosion Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications of Jet-Lube ALCO-EP-73 PLUS 120 LB Base Materials: Aluminum Complex / Lubricating Oils Certifications: MIL-G-18458B-SH Service Rating: -25°F to 450°F, -32°C to 232°C TDS SDS -
Sale!
37729 – Jet-Lube Alco-Ep 73 Plus 400 lb Drum – Lined
Original price was: $4,952.78.$4,457.50Current price is: $4,457.50.Extreme Pressure Multipurpose Grease Jet-Lube ALCO-EP-73 PLUS is a premium, state-of-the-art, multipurpose aluminum complex grease containing a highly synergistic blend of rust and oxidation inhibitors plus extreme pressure and anti-wear additives for maximum performance characteristics. The non-plating, organic EP/anti-wear additives allow ALCO-EP-73 PLUS™ to be used where tolerances are low and/or speeds are high. ALCO-EP-73 PLUS also contains polymer additives; further enhancing the inherent water resistance of an aluminum-complex-based grease. It is extremely resistant to rust and corrosion and ideally suited for use in high-moisture areas, including subsea applications. Benefits of using Alco-EP-73 Plus™ High strength fluid film Extreme resistance to rust & corrosion Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications of Jet-Lube ALCO-EP-73 PLUS 400 LB. DRUM Base Materials: Aluminum Complex / Lubricating Oils Certifications: MIL-G-18458B-SH Service Rating: -25°F to 450°F, -32°C to 232°C TDS SDS -
Sale!
37750 – Jet-Lube Alco-Ep 73 Plus 14 oz Cartridge
Price range: $14.17 through $424.98Extreme Pressure Multipurpose Grease Jet-Lube ALCO-EP-73 PLUS is a premium, state-of-the-art, multipurpose aluminum complex grease containing a highly synergistic blend of rust and oxidation inhibitors plus extreme pressure and anti-wear additives for maximum performance characteristics. The non-plating, organic EP/anti-wear additives allow ALCO-EP-73 PLUS™ to be used where tolerances are low and/or speeds are high. ALCO-EP-73 PLUS also contains polymer additives; further enhancing the inherent water resistance of an aluminum-complex-based grease. It is extremely resistant to rust and corrosion and ideally suited for use in high-moisture areas, including subsea applications. Benefits of using Alco-EP-73 Plus™ High strength fluid film Extreme resistance to rust & corrosion Strong adhesion properties Pumpable Timken load – 45 lbs. Specifications of Jet-Lube ALCO-EP-73 PLUS CARTRIDGE Base Materials: Aluminum Complex / Lubricating Oils Certifications: MIL-G-18458B-SH Service Rating: -25°F to 450°F, -32°C to 232°C TDS SDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode Jet-Lube Alco-EP-73 Plus: How an Aluminum Complex Grease Handles Subsea Extreme Service. Or listen on RSS.com. -
Sale!
38429 – JET-LUBE RISER BOLT LUBE 600 lb drum
Original price was: $1.03.$0.93Current price is: $0.93.JET-LUBE SILICONE COMPOUND DM is a premium silicone compound for use in a wide variety of applications. Its low volatility, non-melting thickener and high dielectric strength make it the compound of choice for moisture proofing ignition systems, spark plug connections, electrical assemblies, cable and battery terminals and other similar applications. BENEFITS: Has no dropping point Excellent work stability under high loads Highly water resistant High strength fluid film Silicone emulsion Pumpable formula Direct Comparison to Dow Corning® 111 Dielectric strength-500volts Valve lubricant Temkin Load – 65 Lbs. Water Resistant Nontoxic SILICONE COMPOUND DM is a dielectric, translucent paste that provides excellent lubrication and sealing properties for plug and gate valves, stuffing boxes, o-rings, vacuum and pressure systems. The low volatility and inert properties allow it to be used on a wide range of elastomers and plastics. It is not recommended for use on surfaces to be painted. Applications Ideally suited as an insulator for electrical connectors against the elements. Thyrotrophic gel acts as a water proofing agent and O-ring lubricant for instrumentation boxes, motor covers, air intakes, and vacuum systems. Use to protect ignition systems, spark plug connections, electrical assemblies, cable and battery terminals from moisture. Not recommended for surfaces to be painted. Service Rating -70°F to 400°F -57°C to 204°C SDS TDS -
Sale!
39529 – Jet-Lube Magic Wrench 350 lb Drum – Lined
Original price was: $5,610.96.$5,049.86Current price is: $5,049.86.Super Penetrant - NSF H1 Jet-Lube MAGIC WRENCH® attacks rust and corrosion quickly and safely to free corroded parts, loosen nuts and aids in the disassembly of mechanical components. MAGIC WRENCH's versatile semi-synthetic formula penetrates, lubricates, removes moisture and protects chains, cables, slides and other moving parts. Benefits of using MAGIC WRENCH® Synthetic fluids Biodegradable Safe on metal & plastic Low VOC's Silicone-free Ozone safe Non-flammable Non-evaporative Specifications of 39529 MAGIC WRENCH® Base Materials: Ester, White Oils / SyntheticsCertifications: NSF Registered H-1 Aerosol Reg#048230 Bulk Reg.#048231Service Rating: -40°F to 350°F, -40°C to 177°C TDS (Aerosol)TDS SDS (Aerosol)SDS -
Sale!
39535 – Jet-Lube Magic Wrench 35 lb Pail
Original price was: $551.17.$496.05Current price is: $496.05.Super Penetrant - NSF H1 Jet-Lube MAGIC WRENCH® attacks rust and corrosion quickly and safely to free corroded parts, loosen nuts and aids in the disassembly of mechanical components. MAGIC WRENCH's versatile semi-synthetic formula penetrates, lubricates, removes moisture and protects chains, cables, slides and other moving parts. Benefits of using MAGIC WRENCH® Synthetic fluids Biodegradable Safe on metal & plastic Low VOC's Silicone-free Ozone safe Non-flammable Non-evaporative Specifications of 39535 MAGIC WRENCH® Base Materials: Ester, White Oils / Synthetics Certifications: NSF Registered H-1 Aerosol Reg#048230 Bulk Reg.#048231 Service Rating: -40°F to 350°F, -40°C to 177°C TDS (Aerosol) TDS SDS (Aerosol) SDS -
Sale!
39541 – Jet-Lube Magic Wrench 13 oz Aerosol
Price range: $19.37 through $232.42Super Penetrant - NSF H1 Jet-Lube MAGIC WRENCH® attacks rust and corrosion quickly and safely to free corroded parts, loosen nuts and aids in the disassembly of mechanical components. MAGIC WRENCH's versatile semi-synthetic formula penetrates, lubricates, removes moisture and protects chains, cables, slides and other moving parts. Benefits of using MAGIC WRENCH® Synthetic fluids Biodegradable Safe on metal & plastic Low VOC's Silicone-free Ozone safe Non-flammable Non-evaporative Specifications of 39541 MAGIC WRENCH® Base Materials: Ester, White Oils / Synthetics Certifications: NSF Registered H-1 Aerosol Reg#048230 Bulk Reg.#048231 Service Rating: -40°F to 350°F, -40°C to 177°C TDS (Aerosol) TDS SDS (Aerosol) SDS -
Sale!
39543 – MAGIC WRENCH®
Price range: $14.16 through $138.09Super Penetrant - NSF H1 Jet-Lube MAGIC WRENCH® attacks rust and corrosion quickly and safely to free corroded parts, loosen nuts and aids in the disassembly of mechanical components. MAGIC WRENCH's versatile semi-synthetic formula penetrates, lubricates, removes moisture and protects chains, cables, slides and other moving parts. Benefits of using MAGIC WRENCH® Synthetic fluids Biodegradable Safe on metal & plastic Low VOC's Silicone-free Ozone safe Non-flammable Non-evaporative Specifications of 39543 MAGIC WRENCH® Base Materials: Ester, White Oils / Synthetics Certifications: NSF Registered H-1 Aerosol Reg#048230 Bulk Reg.#048231 Service Rating: -40°F to 350°F, -40°C to 177°C TDS (Aerosol) TDS SDS (Aerosol) SDS -
Sale!
47102 – Jet-Lube 550 Extreme 1/2 lb Brushtop Can
Price range: $20.28 through $243.32Anti-Seize & Thread Lubricant 550 EXTREME 1/2 lb brush top of Jet-Lube is an enhanced formulation that uses a balance of molybdenum disulfide and surface modified synthetic graphite in a corrosion resistant calcium sulfonate complex base combined to provide protection for a wide variety of applications over a wide temperature range. 550 EXTREME is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 EXTREME eases assembling and dismantling saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. 550 EXTREME utilizes a complex base grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 Extreme. As an added benefit, when compared to anti-seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 EXTREME is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torquing bolts are between 250°-400°F. Benefits No VOC's When used in tandem with graphite stem packings improves conformance to API 622 Low “E” criteria Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications Base Materials: Calcium Sulfonate / Petroleum Friction / Nut-Factor: (Nut-Factor) Uncoated B7 Studs @ 80 ksi - 0.17, (Nut-Factor) Uncoated B8M & Stainless Studs - 0.20 Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type III Service Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -10°F (-23°C), Static Applications: -265°F (-165°C)** ( **Based on component literature data in cryogenic applications.) TDS SDS -
Sale!
47104 – Jet-Lube 550 Extreme 1 lb Brushtop Can
Price range: $33.84 through $406.08Jet-Lube 550 Extreme Anti-Seize & Thread Lubricant An enhanced formulation that uses a balance of molybdenum disulfide and surface modified synthetic graphite in a corrosion resistant calcium sulfonate complex base combined to provide protection for a wide variety of applications over a wide temperature range. 550 EXTREME is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 EXTREME eases assembling and dismantling saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. 550 EXTREME utilizes a complex base grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 Extreme. As an added benefit, when compared to anti-seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 EXTREME is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torqueing bolts are between 250°-400°F. Benefits of using 550®Extreme® No VOC's When used in tandem with graphite stem packings improves conformance to API 622 Low “E” criteria Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications of 47102 550® EXTREME® Base Materials: Complex / Petroleum Friction / Nut-Factor: (Nut-Factor) Uncoated B7 Studs @ 80 ksi - 0.17, (Nut-Factor) Uncoated B8M & Stainless Studs - 0.20 Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type III Service Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -10°F (-23°C), Static Applications: -265°F (-165°C)** ( **Based on component literature data in cryogenic applications.) TDS SDS -
47109 – Jet-Lube 550 Extreme 1 lb Wide Mouth Container, Case of 12
$439.87What is Jet-Lube 550 Extreme? A low "E" enhanced formulation that uses a balance of molybdenum disulfide and surface modified synthetic graphite in a corrosion resistant calcium sulfonate complex base combined to provide protection for a wide variety of applications over a wide temperature range. 550 EXTREME is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. Which pack is part 47109? Part 47109 is the 1 lb Wide Mouth Container, supplied 12 to the case. The part number changes with the pack, not with the product: Jet-Lube numbers 8 packs of Jet-Lube 550 Extreme for the United States. Part numberPack471551/4 LB - 24/case Brushtop Can - 1/4 LB471021/2 LB - 12/case Brushtop Can -1/2 LB471041 LB - 12/case Brushtop Can - 1 LB471091 LB - 12/case Wide Mouth Container - 1 LB471231 GAL Pail - 10 LB471122 GAL Pail - 19 LB471155 GAL Pail - 45 LB47129Drum (Lined) - 500 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits No VOC'sWhen used in tandem with graphite stem packings improves conformance to API 622 Low “E” criteriaRust & corrosion inhibitorsLead-freeNot affected by contraction, expansion or vibration Specifications Base Materials Calcium Sulfonate / PetroleumFriction / Nut-Factor (Nut-Factor) 1” Uncoated B7 Studs @ 80 ksi 0.15 (Nut-Factor) 1” Uncoated B7 Studs @ 50 ksi 0.18 (Nut-Factor) 1” Uncoated B7 Studs @ 30 ksi 0.19Certifications MIL-PRF-907F Raytheon Specification - M8656839 Type IIIService Rating Select Applications/Services: 2400°F (1316°C) Brushable to or as a lubricant: -10°F (-23°C) Static Applications: -265°F (-165°C)** ( **Based on component literature data in cryogenic applications.) Specifications as published by Jet-Lube for 550 Extreme. Frequently asked questions What does part number 47109 come in? 47109 is the 1 lb Wide Mouth Container, sold 12 to the case, and the price on this page is the price of that case. Is 47109 sold in other sizes? The same product is numbered 47155, 47102, 47104, 47123, 47112, 47115, 47129 in its other packs. Ask us for any of them. How do I order this part? Order part 47109 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
Sale!
47112 – Jet-Lube 550 Extreme 19 lb pail
Original price was: $505.54.$454.99Current price is: $454.99.Anti-Seize & Thread Lubricant A low "E" enhanced formulation that uses a balance of molybdenum disulfide and surface modified synthetic graphite in a corrosion resistant calcium sulfonate complex base combined to provide protection for a wide variety of applications over a wide temperature range.550 EXTREME is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 EXTREME eases assembling and dismantling saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning.550 EXTREME utilizes a complex base grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 EXTREME.As an added benefit, when compared to anti-seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 EXTREME is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torqueing bolts are between 250°- 400°F.APPLICATIONS: 550 EXTREME works equally well on steel, stainless steel, cast iron, titanium, copper, brass, alloys, and plastic., and gasket materials. 550 EXTREME is an effective anti-seize for use with LPG and other gasses. For sealing applications, use V2®. Benefits: No VOC's When used in tandem with graphite stem packings improves conformance to API 622 Low “E” criteria Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications: Base Materials: Calcium Sulfonate / PetroleumFriction / Nut-Factor: (Nut-Factor) Uncoated B7 Studs @ 80 ksi - 0.17, (Nut-Factor) Uncoated B8M & Stainless Studs - 0.20Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type IIIService Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -10°F (-23°C), Static Applications: -265°F (-165°C)** ( **Based on component literature data in cryogenic applications.) TDS SDS -
Sale!
47113 – 550® EXTREME®
Original price was: $801.14.$721.03Current price is: $721.03.Anti-Seize & Thread Lubricant Jet-Lube 550 EXTREME is an enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined offering maximum protection against seizure and heat-freeze, eases assembling and dismantling, and saves man hours. 550® Extreme® protects against rust, oxidation and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. It contains no VOC’s and has low “E” (Emissions) technology, making it the ideal product for petrochemical plants and valve maintenance needs. Benefits of using 550®Extreme® No VOC's Low "E" (Emission) Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications of 47113 550® EXTREME® Base Materials: Complex / Petroleum Friction / K-Factor: 0.17 Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type III Service Rating: -65°F to 2400°F, -54°C to 1316°C TDS SDS -
Sale!
47115 – Jet-Lube 550 Extreme 45 lb pail
Original price was: $723.42.$651.08Current price is: $651.08.Anti-Seize & Thread Lubricant A low "E" enhanced formulation that uses a balance of molybdenum disulfide and surface modified synthetic graphite in a corrosion resistant calcium sulfonate complex base combined to provide protection for a wide variety of applications over a wide temperature range. 550 EXTREME is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 EXTREME eases assembling and dismantling saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. 550 EXTREME utilizes a complex base grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 EXTREME. As an added benefit, when compared to anti-seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 EXTREME is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torqueing bolts are between 250°- 400°F. APPLICATIONS: 550 EXTREME works equally well on steel, stainless steel, cast iron, titanium, copper, brass, alloys, and plastic., and gasket materials. 550 EXTREME is an effective anti-seize for use with LPG and other gasses. For sealing applications, use V2®. Benefits: No VOC's When used in tandem with graphite stem packings improves conformance to API 622 Low “E” criteria Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications: Base Materials: Calcium Sulfonate / Petroleum Friction / Nut-Factor: (Nut-Factor) Uncoated B7 Studs @ 80 ksi - 0.17, (Nut-Factor) Uncoated B8M & Stainless Studs - 0.20 Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type III Service Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -10°F (-23°C), Static Applications: -265°F (-165°C)** ( **Based on component literature data in cryogenic applications.) TDS SDS -
Sale!
47123 – Jet-Lube 550 Extreme 10 lb pail
Original price was: $342.93.$308.64Current price is: $308.64.Anti-Seize & Thread Lubricant A low "E" enhanced formulation that uses a balance of molybdenum disulfide and surface modified synthetic graphite in a corrosion resistant calcium sulfonate complex base combined to provide protection for a wide variety of applications over a wide temperature range. 550 EXTREME is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 EXTREME eases assembling and dismantling saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. 550 EXTREME utilizes a complex base grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 EXTREME. As an added benefit, when compared to anti-seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 EXTREME is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torqueing bolts are between 250°- 400°F. APPLICATIONS: 550 EXTREME works equally well on steel, stainless steel, cast iron, titanium, copper, brass, alloys, and plastic., and gasket materials. 550 EXTREME is an effective anti-seize for use with LPG and other gasses. For sealing applications, use V2®. Benefits: No VOC's When used in tandem with graphite stem packings improves conformance to API 622 Low “E” criteria Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications: Base Materials: Calcium Sulfonate / Petroleum Friction / Nut-Factor: (Nut-Factor) Uncoated B7 Studs @ 80 ksi - 0.17, (Nut-Factor) Uncoated B8M & Stainless Studs - 0.20 Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type III Service Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -10°F (-23°C), Static Applications: -265°F (-165°C)** ( **Based on component literature data in cryogenic applications.) TDS SDS -
Sale!
47129 – Jet-Lube 550 Extreme 500 lb Drum – Lined
Original price was: $11,708.37.$10,537.53Current price is: $10,537.53.Anti-Seize & Thread Lubricant Jet-Lube 550 EXTREME is an enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined offering maximum protection against seizure and heat-freeze, eases assembling and dismantling, and saves man hours. 550® Extreme® protects against rust, oxidation and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. It contains no VOC’s and has low “E” (Emissions) technology, making it the ideal product for petrochemical plants and valve maintenance needs. Benefits of using 550®Extreme® No VOC's Low "E" (Emission) Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications of 47129 550® EXTREME® Base Materials: Complex / Petroleum Friction / K-Factor: 0.17 Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type III Service Rating: -65°F to 2400°F, -54°C to 1316°C TDS SDS -
Sale!
47155 – Jet-Lube 550 Extreme 1/4 lb Brush Top
Price range: $21.24 through $509.76Anti-Seize & Thread Lubricant A low "E" enhanced formulation that uses a balance of molybdenum disulfide and surface modified synthetic graphite in a corrosion resistant calcium sulfonate complex base combined to provide protection for a wide variety of applications over a wide temperature range. 550 EXTREME is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 EXTREME eases assembling and dismantling saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. 550 EXTREME utilizes a complex base grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 EXTREME. As an added benefit, when compared to anti-seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 EXTREME is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torqueing bolts are between 250°- 400°F. APPLICATIONS: 550 EXTREME works equally well on steel, stainless steel, cast iron, titanium, copper, brass, alloys, and plastic., and gasket materials. 550 EXTREME is an effective anti-seize for use with LPG and other gasses. For sealing applications, use V2®. Benefits: No VOC's When used in tandem with graphite stem packings improves conformance to API 622 Low “E” criteria Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications: Base Materials: Calcium Sulfonate / Petroleum Friction / Nut-Factor: (Nut-Factor) Uncoated B7 Studs @ 80 ksi - 0.17, (Nut-Factor) Uncoated B8M & Stainless Studs - 0.20 Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type III Service Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -10°F (-23°C), Static Applications: -265°F (-165°C)** ( **Based on component literature data in cryogenic applications.) TDS SDS -
Sale!
47161 – 550 EXTREME
Price range: $27.26 through $654.32Anti-Seize & Thread Lubricant Jet-Lube 550 Extreme is an enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined offering maximum protection against seizure and heat-freeze, eases assembling and dismantling, and saves man hours. 550® Extreme® protects against rust, oxidation and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. It contains no VOC’s and has low “E” (Emissions) technology, making it the ideal product for petrochemical plants and valve maintenance needs. Benefits of using 550®Extreme® No VOC's Low "E" (Emission) Rust & corrosion inhibitors Lead-free Not affected by contraction, expansion or vibration Specifications of 47161 550 EXTREME Base Materials: Complex / Petroleum Friction / K-Factor: 0.17Certifications: MIL-PRF-907F, Raytheon Specification - M8656839 Type IIIService Rating: -65°F to 2400°F, -54°C to 1316°C TDS SDS -
Sale!
47202 – Jet-Lube 550 Extreme All-Weather 1/2 lb Brush Top
Price range: $26.63 through $319.51Nonmetallic Anti-Seize & Thread Lubricant An enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined to provide protection for a wide variety of applications over a wide temperature range. 550 Extreme All Weather is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 Extreme All-Weather eases assembling and dismantling, saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. In addition to molybdenum disulfide (MoS2), surface modified synthetic graphite, and low friction fillers, 550 Extreme All Weather utilizes a fully synthetic fluid, calcium sulfonate complex based grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 Extreme All Weather. As an added benefit, when compared to Anti-Seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 Extreme All Weather is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torquing bolts are between 250-400ºF. Benefits: Exceptional brushability down to -40°F (-40°C) Lead-free Not affected by contraction, expansion or vibration Enhanced rust and corrosion resistance Protects against seizure, heat-freeze, galling, rust and corrosion Lowers friction, reduces wrench torque Provides easy makeup and breakout Reduces maintenance costs Specifications: Base Materials: Calcium Sulfonate Complex/ Petroleum Friction / Nut-Factor: (Nut-Factor)* 1” B7 Studs @ 50 ksi Stress - 0.15, (Nut-Factor)* B8M & Stainless Studs - 0.20 Certifications: MIL-PRF-907F Service Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -50°F (-46°C), Static Applications: -265°F (-165°C)** TDS SDS -
Sale!
47203 – Jet-Lube 550 Extreme Awg 1 lb Brushtop Can
Price range: $41.83 through $501.98JET-LUBE EXTREME® ALL-WEATHER offers the same performance and package of solid lubricants, such as 550 EXTREME but with a new and advanced synthetic grease base carrier. This grease offers exceptional brushability down to -40°C / -40°F and carries a flash point of over 260°C/500°F. For an anti-seize compound to work effectively, it needs to be properly applied to the threads, standard petroleum oils will harden significantly below -12°C/10°F making this application difficult. BENEFITS of JET-LUBE EXTREME® ALL-WEATHER Enhanced rust and corrosion resistance Lead free Protects against seizure, heat-freeze, galling, rust and corrosion Lowers friction, reduces wrench torque Provides easy makeup and breakout Reduces maintenance costs Not affected by contraction, expansion, or vibration 550 EXTREME ALL-WEATHER's base grease is a blend of synthetic fluids with pour points no higher than -50°F, thickened with a calcium sulfonate complex to provide better rust and corrosion protection. This unique combination makes for an excellent product in low temperature environments but equally as good in high temperatures. Applications Alkey Gaskets, Threads, Flange Faces, Keyways, Gaskets, Slides, Guides and Fittings. Well suited for steel and aluminum. Works equally well on stainless steel, cast iron, titanium, copper, brass, alloys, plastic, and gasket materials and is an effective anti-seize for use with LPG and other gasses. For sealing applications, use V-2® Note: Not for use with oxygen lines. Service Rating: -65°F to 2400°F -54°C to 1316°C Featured in our podcast Hear how this product solves real-world reliability problems in our episode JetLube 550 Extreme Anti-Seize: How a Low-E Nonmetallic Compound Prevents Thread Seizure. Or listen on RSS.com. -
Sale!
47215 – Jet-Lube 550 Extreme All-Weather 45 lb pail
Original price was: $1,267.57.$1,140.81Current price is: $1,140.81.Nonmetallic Anti-Seize & Thread Lubricant An enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined to provide protection for a wide variety of applications over a wide temperature range. 550 Extreme All Weather is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 Extreme All-Weather eases assembling and dismantling, saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. In addition to molybdenum disulfide (MoS2), surface modified synthetic graphite, and low friction fillers, 550 Extreme All Weather utilizes a fully synthetic fluid, calcium sulfonate complex based grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 Extreme All Weather. As an added benefit, when compared to Anti-Seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 Extreme All Weather is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torquing bolts are between 250-400ºF. Benefits: Exceptional brushability down to -40°F (-40°C) Lead-free Not affected by contraction, expansion or vibration Enhanced rust and corrosion resistance Protects against seizure, heat-freeze, galling, rust and corrosion Lowers friction, reduces wrench torque Provides easy makeup and breakout Reduces maintenance costs Specifications: Base Materials: Calcium Sulfonate Complex/ Petroleum Friction / Nut-Factor: (Nut-Factor)* 1” B7 Studs @ 50 ksi Stress - 0.15, (Nut-Factor)* B8M & Stainless Studs - 0.20 Certifications: MIL-PRF-907F Service Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -50°F (-46°C), Static Applications: -265°F (-165°C)** TDS SDS -
Sale!
47223 – Jet-Lube 550 Extreme All-Weather 10 lb pail
Original price was: $392.43.$353.19Current price is: $353.19.Nonmetallic Anti-Seize & Thread Lubricant An enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined to provide protection for a wide variety of applications over a wide temperature range. 550 Extreme All Weather is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 Extreme All-Weather eases assembling and dismantling, saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. In addition to molybdenum disulfide (MoS2), surface modified synthetic graphite, and low friction fillers, 550 Extreme All Weather utilizes a fully synthetic fluid, calcium sulfonate complex based grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 Extreme All Weather. As an added benefit, when compared to Anti-Seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 Extreme All Weather is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torquing bolts are between 250-400ºF. Benefits: Exceptional brushability down to -40°F (-40°C) Lead-free Not affected by contraction, expansion or vibration Enhanced rust and corrosion resistance Protects against seizure, heat-freeze, galling, rust and corrosion Lowers friction, reduces wrench torque Provides easy makeup and breakout Reduces maintenance costs Specifications: Base Materials: Calcium Sulfonate Complex/ Petroleum Friction / Nut-Factor: (Nut-Factor)* 1” B7 Studs @ 50 ksi Stress - 0.15, (Nut-Factor)* B8M & Stainless Studs - 0.20 Certifications: MIL-PRF-907F Service Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -50°F (-46°C), Static Applications: -265°F (-165°C)** TDS SDS -
47224 – Jet-Lube 550 Extreme AWG 145 lb Keg
$5,018.86What is Jet-Lube 550 Extreme AWG? An enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined to provide protection for a wide variety of applications over a wide temperature range. 550 Extreme All Weather is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. Which pack is part 47224? Part 47224 is the 145 lb Keg. The part number changes with the pack, not with the product: Jet-Lube numbers 7 packs of Jet-Lube 550 Extreme AWG for the United States. Part numberPack472551/4 LB - 24/case Brushtop Can - 1/4 LB472021/2 LB - 12/case Brushtop Can - 1/2 LB472031 LB - 12/case Brushtop Can - 1 LB472231 GAL Pail - 10 LB472155 GAL Pail - 45 LB47224Keg - 145 LB47229Drum (Lined) - 510 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits Exceptional brushability down to -40°F (-40°C)Lead-freeNot affected by contraction, expansion or vibrationEnhanced rust and corrosion resistanceProtects against seizure, heat-freeze, galling, rust and corrosionLowers friction, reduces wrench torqueProvides easy makeup and breakoutReduces maintenance costs Specifications Base Materials Calcium Sulfonate Complex/ PetroleumFriction / Nut-Factor (Nut-Factor) 1” Uncoated” B7 Studs @ 80 ksi 0.16 (Nut-Factor) 1” Uncoated” B7 Studs @ 50 ksi 0.17 (Nut-Factor) 1” Uncoated” B7 Studs @ 30 ksi 0.18Certifications MIL-PRF-907FService Rating Select Applications/Services: 2400°F (1316°C) Brushable to or as a lubricant: -50°F (-46°C) Static Applications: -265°F (-165°C)** Specifications as published by Jet-Lube for 550 Extreme AWG. Frequently asked questions What does part number 47224 come in? 47224 is the 145 lb Keg, and the price on this page is the price of that pack. Is 47224 sold in other sizes? The same product is numbered 47255, 47202, 47203, 47223, 47215, 47229 in its other packs. Ask us for any of them. How do I order this part? Order part 47224 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
47229 – Jet-Lube 550 Extreme AWG 510 lb Drum (Lined)
$17,055.26What is Jet-Lube 550 Extreme AWG? An enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined to provide protection for a wide variety of applications over a wide temperature range. 550 Extreme All Weather is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. Which pack is part 47229? Part 47229 is the 510 lb Drum (Lined). The part number changes with the pack, not with the product: Jet-Lube numbers 7 packs of Jet-Lube 550 Extreme AWG for the United States. Part numberPack472551/4 LB - 24/case Brushtop Can - 1/4 LB472021/2 LB - 12/case Brushtop Can - 1/2 LB472031 LB - 12/case Brushtop Can - 1 LB472231 GAL Pail - 10 LB472155 GAL Pail - 45 LB47224Keg - 145 LB47229Drum (Lined) - 510 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits Exceptional brushability down to -40°F (-40°C)Lead-freeNot affected by contraction, expansion or vibrationEnhanced rust and corrosion resistanceProtects against seizure, heat-freeze, galling, rust and corrosionLowers friction, reduces wrench torqueProvides easy makeup and breakoutReduces maintenance costs Specifications Base Materials Calcium Sulfonate Complex/ PetroleumFriction / Nut-Factor (Nut-Factor) 1” Uncoated” B7 Studs @ 80 ksi 0.16 (Nut-Factor) 1” Uncoated” B7 Studs @ 50 ksi 0.17 (Nut-Factor) 1” Uncoated” B7 Studs @ 30 ksi 0.18Certifications MIL-PRF-907FService Rating Select Applications/Services: 2400°F (1316°C) Brushable to or as a lubricant: -50°F (-46°C) Static Applications: -265°F (-165°C)** Specifications as published by Jet-Lube for 550 Extreme AWG. Frequently asked questions What does part number 47229 come in? 47229 is the 510 lb Drum (Lined), and the price on this page is the price of that pack. Is 47229 sold in other sizes? The same product is numbered 47255, 47202, 47203, 47223, 47215, 47224 in its other packs. Ask us for any of them. How do I order this part? Order part 47229 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock. -
Sale!
47255 – Jet-Lube 550 Extreme® All-Weather 1/4 lb Brush Top
Price range: $22.11 through $530.63Nonmetallic Anti-Seize & Thread Lubricant An enhanced formulation using a balance of molybdenum disulfide and surface modified synthetic graphite combined to provide protection for a wide variety of applications over a wide temperature range. 550 Extreme All Weather is the ideal product for petrochemical plant maintenance needs. Its composition offers maximum protection against seizure and heat freeze. 550 Extreme All-Weather eases assembling and dismantling, saving man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. In addition to molybdenum disulfide (MoS2), surface modified synthetic graphite, and low friction fillers, 550 Extreme All Weather utilizes a fully synthetic fluid, calcium sulfonate complex based grease that is fortified with effective rust and corrosion inhibitors and provides inherent anti-wear properties. Each principal anti-seize, low friction ingredient provides important properties and characteristics to 550 Extreme All Weather. As an added benefit, when compared to Anti-Seize compounds containing greater than 40% molybdenum disulfide the coefficient friction of 550 Extreme All Weather is less sensitive to temperature. High molybdenum products can have substantial friction function drops when hot torquing bolts are between 250-400ºF. Benefits: Exceptional brushability down to -40°F (-40°C) Lead-free Not affected by contraction, expansion or vibration Enhanced rust and corrosion resistance Protects against seizure, heat-freeze, galling, rust and corrosion Lowers friction, reduces wrench torque Provides easy makeup and breakout Reduces maintenance costs Specifications: Base Materials: Calcium Sulfonate Complex/ Petroleum Friction / Nut-Factor: (Nut-Factor)* 1” B7 Studs @ 50 ksi Stress - 0.15, (Nut-Factor)* B8M & Stainless Studs - 0.20 Certifications: MIL-PRF-907F Service Rating: Select Applications/Services: 2400°F (1316°C), Brushable to or as a lubricant: -50°F (-46°C), Static Applications: -265°F (-165°C)** TDS SDS -
Sale!
49702 – Jet-Lube Marine Grade Anti-Seize 1/2 lb Brushtop Can
Price range: $20.06 through $240.75Nonmetallic Anti-Seize & Thread Lubricant Jet-Lube MARINE GRADE ANTI-SEIZE is a non-conductive, non-metallic blend of anti-friction materials specially formulated to meet the new requirements for marine and offshore environments. MARINE GRADE ANTI-SEIZE falls within the range of environmentally preferable lubricants for use as a best management practice (BMP) by operators of vessels covered under the Vessel General Permit for Discharges Incidental to the Normal Operation of Vessels (VGP). It meets the requirements for environmentally acceptable lubricant (EAL) as used to describe those lubricants which have been demonstrated to meet standards for biodegradability, toxicity and bioaccumulation potential that minimize their likely adverse consequences in the aquatic environment when compared to conventional lubricants. MARINE GRADE ANTI-SEIZE is specifically selected to reduce the potential for galvanic corrosion and protect sensitive or galling prone alloys such as chrome and Inconel. These fill the voids and imperfections on the surface shielding sliding components of interference making assembly and disassembly easy without damage to the nut or bolt. BENEFITS of MARINE GRADE ANTI-SEIZE No metallic components Highly water-resistant Extreme temperature - Suited for high humidity offshore environments High film strength Non-conductive No VOC's Environmentally safe Specifications of 49702 MARINE GRADE ANTI-SEIZE Base Materials: Complex Blend / Synthetic & Vegetable Oils Friction / K-Factor: 0.15 Certifications: MIL-PRF-907F, OSPAR compliant, registered by both CEFAS in the UK and KPD/SFT in Norway, Not considered a marine pollutant, ECO-Compliant TDS SDS -
Sale!
49704 – Jet-Lube Marine Grade Anti-Seize 1 lb Brushtop Can
Price range: $30.36 through $364.14Nonmetallic Anti-Seize & Thread Lubricant Jet-Lube MARINE GRADE ANTI-SEIZE is a non-conductive, non-metallic blend of anti-friction materials specially formulated to meet the new requirements for marine and offshore environments. MARINE GRADE ANTI-SEIZE falls within the range of environmentally preferable lubricants for use as a best management practice (BMP) by operators of vessels covered under the Vessel General Permit for Discharges Incidental to the Normal Operation of Vessels (VGP). It meets the requirements for environmentally acceptable lubricant (EAL) as used to describe those lubricants which have been demonstrated to meet standards for biodegradability, toxicity and bioaccumulation potential that minimize their likely adverse consequences in the aquatic environment when compared to conventional lubricants. MARINE GRADE ANTI-SEIZE is specifically selected to reduce the potential for galvanic corrosion and protect sensitive or galling prone alloys such as chrome and Inconel. These fill the voids and imperfections on the surface shielding sliding components of interference making assembly and disassembly easy without damage to the nut or bolt. BENEFITS of MARINE GRADE ANTI-SEIZE No metallic components Highly water-resistant Extreme temperature - Suited for high humidity offshore environments High film strength Non-conductive No VOC's Environmentally safe Specifications of 49704 MARINE GRADE ANTI-SEIZE Base Materials: Complex Blend / Synthetic & Vegetable Oils Friction / K-Factor: 0.15 Certifications: MIL-PRF-907F, OSPAR compliant, registered by both CEFAS in the UK and KPD/SFT in Norway, Not considered a marine pollutant, ECO-Compliant TDS SDS -
Sale!
50305 – JET-LUBE WHITE LITHIUM GREASE 1 lb. can
Original price was: $1.03.$0.93Current price is: $0.93.All-Purpose Grease w/ PTFE - H2 JET-LUBE WHITE LITHIUM GREASE 1 lb. can is a premium all-purpose grease that provides superior performance and protection. WHITE LITHIUM GREASE with PTFE penetrates and forms a long lasting protective film that will withstand heavy loads and will not run or wash away. Benefits of using White Lithium Grease Has a dropping point of >425°F Highly water-resistant Rust & corrosion inhibitors Pumpable High strength fluid film High lithium soap content >10% Pumpable Fortified with PTFE anti-wear additives Timken load - 45 lbs. Specifications: Base Materials: Lithium / Petroleum Oils Certifications: CFIA listed, NSF Registered H2 Bulk - Reg. #137549 Aerosol - Reg. #137550 Service Rating: 0°F to 370°F, -18°C to 190°C TDS (Aerosol) TDS SDS -
Sale!
50316 – Jet-Lube White Lithium Grease 35 lb Pail
Original price was: $421.22.$379.10Current price is: $379.10.All-Purpose Grease w/ PTFE - H2 JET-LUBE WHITE LITHIUM GREASE is a premium all-purpose grease that provides superior performance and protection. WHITE LITHIUM GREASE with PTFE penetrates and forms a long lasting protective film that will withstand heavy loads and will not run or wash away. Benefits of using White Lithium Grease Has a dropping point of >425°F Highly water-resistant Rust & corrosion inhibitors Pumpable High strength fluid film High lithium soap content >10% Pumpable Fortified with PTFE anti-wear additives Timken load - 45 lbs. Specifications of 50316 WHITE LITHIUM Base Materials: Lithium / Petroleum OilsCertifications: CFIA listed, NSF Registered H2 Bulk - Reg. #137549 Aerosol - Reg. #137550Service Rating: 0°F to 370°F, -18°C to 190°C TDS (Aerosol)TDSSDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode Jet-Lube White Lithium Grease with PTFE: How an NLGI 2 Multi-Purpose Grease Prevents Rust and Wear. Or listen on RSS.com. -
Sale!
50324 – Jet-Lube White Lithium Grease 120 lb Keg
Original price was: $1,204.06.$1,083.65Current price is: $1,083.65.All-Purpose Grease w/ PTFE - H2 Jet-Lube WHITE LITHIUM GREASE is a premium all-purpose grease that provides superior performance and protection. WHITE LITHIUM GREASE with PTFE penetrates and forms a long lasting protective film that will withstand heavy loads and will not run or wash away. Benefits of using White Lithium Grease Has a dropping point of >425°F Highly water-resistant Rust & corrosion inhibitors Pumpable High strength fluid film High lithium soap content >10% Pumpable Fortified with PTFE anti-wear additives Timken load - 45 lbs. Specifications of 50324 WHITE LITHIUM GREASE Base Materials: Lithium / Petroleum Oils Certifications: CFIA listed, NSF Registered H2 Bulk - Reg. #137549 Aerosol - Reg. #137550 Service Rating: 0°F to 370°F, -18°C to 190°C TDS (Aerosol) TDS SDS -
Sale!
50329 – Jet-Lube White Lithium Grease 400 lb Drum
Original price was: $4,078.22.$3,670.40Current price is: $3,670.40.All-Purpose Grease w/ PTFE - H2 Jet-Lube WHITE LITHIUM is a premium all-purpose grease that provides superior performance and protection. WHITE LITHIUM GREASE with PTFE penetrates and forms a long lasting protective film that will withstand heavy loads and will not run or wash away. Benefits of using White Lithium Has a dropping point of >425°F Highly water-resistant Rust & corrosion inhibitors Pumpable High strength fluid film High lithium soap content >10% Pumpable Fortified with PTFE anti-wear additives Timken load - 45 lbs. Specifications of 50329 WHITE LITHIUM GREASE Base Materials: Lithium / Petroleum Oils Certifications: CFIA listed, NSF Registered H2 Bulk - Reg. #137549 Aerosol - Reg. #137550 Service Rating: 0°F to 370°F, -18°C to 190°C TDS (Aerosol) TDS SDS -
Sale!
50341 – JET-LUBE WHITE LITHIUM GREASE 13 oz aerosol
Original price was: $19.43.$17.48Current price is: $17.48.All-Purpose Grease w/ PTFE - H2 Jet-Lube WHITE LITHIUM GREASE is a premium all-purpose grease that provides superior performance and protection. WHITE LITHIUM GREASE with PTFE penetrates and forms a long lasting protective film that will withstand heavy loads and will not run or wash away. Benefits of using White Lithium Grease Has a dropping point of >425°F Highly water-resistant Rust & corrosion inhibitors Pumpable High strength fluid film High lithium soap content >10% Pumpable Fortified with PTFE anti-wear additives Timken load - 45 lbs. Specifications of 50341 JET-LUBE WHITE LITHIUM GREASE 13 oz aerosol Base Materials: Lithium / Petroleum Oils Certifications: CFIA listed, NSF Registered H2 Bulk - Reg. #137549 Aerosol - Reg. #137550 Service Rating: 0°F to 370°F, -18°C to 190°C TDS (Aerosol) TDS SDS