Oil Level Gauge Indicator

12″ OLI – 1/2″ MNPT X 1/2″ MNPT The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Overall Length: 12 in / 30.48 cmDiameter of Acrylic: 0.875 in / 2.223 cm Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately   Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs  

18″ OLI – 1/2″ MNPT X 1/2″ MNPT18"/ 457 mm Oil Level Indicator, 7/8" OD, 1/2" Male NPT on each end The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately   Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs  

27"/ 686 mm Oil Level Indicator, 7/8" OD, 1/2" Male NPT on each end The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately   Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs  

6″ OLI – 1/2″ MNPT X 1/2″ MNPT The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Overall Length: 6 in / 15.24 cm Diameter of Acrylic: 0.875 in / 2.223 cm Features: By the Numbers 1. ND-2 Breather *Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting *Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical Compatibility All gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request   Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs

9″ OLI – 1/2″ MNPT X 1/2″ MNPT The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Overall Length: 9 in / 22.86 cmDiameter of Acrylic: 0.875 in / 2.223 cm Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately   Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs