Tools
Showing 1846–1890 of 2306 results
-
N1620 – GEARENCH TITAN FLANGE SPREADER
$510.00TITAN FLANGE SPREADER -
Sale!
N1620-S1 – GEARENCH TITAN FLANGE SPREADER
Original price was: $506.00.$424.00Current price is: $424.00.TITAN FLANGE SPREADER -
Sale!
N1620-S2 – GEARENCH TITAN FLANGE SPREADER
Original price was: $506.00.$430.00Current price is: $430.00.TITAN FLANGE SPREADER -
N16200 – GEARENCH FRAME, TITAN FLANGE
$286.00FRAME, TITAN FLANGE -
N2024 – GEARENCH TITAN FLANGE SPREADER
$580.00TITAN FLANGE SPREADER -
N2024-S1 – GEARENCH TITAN FLANGE SPREADER
$596.00TITAN FLANGE SPREADER -
N2024-S2 – GEARENCH TITAN FLANGE SPREADER
$596.00TITAN FLANGE SPREADER -
N20240 – GEARENCH FRAME, TITAN FLANGE
$307.00FRAME, TITAN FLANGE -
N48 – GEARENCH TITAN FLANGE SPREADER
$323.00TITAN FLANGE SPREADER -
N48-S1 – GEARENCH TITAN FLANGE SPREADER
$505.00TITAN FLANGE SPREADER -
N480 – GEARENCH FRAME, TITAN FLANGE
$161.00FRAME, TITAN FLANGE -
N4881-0 – GEARENCH WEDGE REGULAR,SHARP POINT
$68.00Out of Stock, Bulk Orders available Contact us at sales@industrialstop.comWEDGE REGULAR,SHARP POINT -
N4881-3 – GEARENCH WEDGE, 3/16″ PT. SPECIAL
$269.10WEDGE, 3/16" PT. SPECIAL -
N4881-5 – GEARENCH WEDGE, SPECIAL ALIGNING
$171.20WEDGE, SPECIAL ALIGNING -
N4881-7 – GEARENCH WEDGE, 7/16″ PT. SPECIAL
$174.40WEDGE, 7/16" PT. SPECIAL -
N812 – GEARENCH TITAN FLANGE SPREADER
$347.00TITAN FLANGE SPREADER -
NLA – Ratchet Jack
Sometimes called center link, top link, or screw bolt jack Used for manual elevation of trailers, 3-point hitches, or where a finite movement of some part is required Inexpensive substitute for a hydraulic cylinder Tested to surpass all John Deere standards set by both the John Deere Ottumwa and Des Moines factories. Specification Compression and tension ratings exceed SAE standards and most competitive products on the market - 16,000 pounds pull (tension) - 10,000 pounds push (compression) Length: 20-inches retracted; 28-inches extended Stainless steel flat-ratchet spring built to provide 20 times the competition’s life 3/8-in. U-brackets tested to the endurance limit—exceed competition’s life by a factor of six Flip the pawl on the ratchet assembly to change from expansion to retraction simply with little effort Includes: - Painted outer tube - Two zerk fittings - Hexagonal jam nut - Yellow zinc dichromate-plated handle (12-in.) and cotter pin - 3/8-in. thick, yellow zinc-plated U-brackets - Reinforced steel assembly housing with user-friendly pawl - Stainless steel flat spring - Five 1-1/8-in. yellow, zinc-dichromate-plated Acme screws - Two 1-in. diameter pins with clips - Service parts: NLA - Lever, 12-in., NLA - Grooved, headless pin, NLA - Hair pin clip, H95042 - Cotter pin -
PM00012 – Hair pin clip
Trailer hitch balls Meets SAE J684F specs All SAE Classes I, II, III, IV One-piece, solid-steel Chrome finish -
PM00950 – Spinner knob adapter kit
Spinner knob adapter kit for AM131662 steering wheel The spinner knob adapter kit allows proper mounting of a spinner knob on lawn and garden steering wheel AM131662. This kit is designed to mount a spinner knob in an upright position, rather than at an angle. The AM131662 steering wheel is used on the following models of equipment: LT133, LT155, LT166, LX255, LX277, LX288, LX279, GT225, GT235, LTR155, and LTR166. Kit contents: Two plastic mounting brackets - Two bolts - Two nuts - Two washers -
PM00965 – Current logo, yellow on black
All are heavy-duty knobs with a comfort-grip vinyl coating Brackets for regular and deep spoke wheels provided Includes rubber space adapter to adjust fit on various steering wheels -
PM00966 – Current logo, yellow on green
All are heavy-duty knobs with a comfort-grip vinyl coating Brackets for regular and deep spoke wheels provided Includes rubber space adapter to adjust fit on various steering wheels -
PM01411 – Bent hitch pin and clip
Trailer hitch balls Meets SAE J684F specs All SAE Classes I, II, III, IV One-piece, solid-steel Chrome finish -
PM05101 – Hitch ball, trailer, 1-7/8-in. ball size, Class I
Vesc Class: I Max. Load (lb.): 2,000 Ball Size (in.): 1-7/8 Thread Diameter (in.): 3/4 Stud Length (in.): 1-3/4 Weight (lb.): 1.6 Trailer hitch balls Meets SAE J684F specs All SAE Classes I, II, III, IV One-piece, solid-steel Chrome finish -
PM05201 – Hitch ball, trailer, 2-in. ball size, Class II
Vesc Class: II Max. Load (lb.): 3500 Ball Size (in.): 2 Thread Diameter (in.): 3/4 Stud Length (in.): 1-3/4 Weight (lb.): 2.4 Class II rating 1-1/4-inch solid steel shank 3,500-lb. gross load 350-lb. tongue load Trailer hitch balls Meets SAE J684F specs All SAE Classes I, II, III, IV One-piece, solid-steel Chrome finish -
PM05301 – Hitch ball, trailer, 2-in. ball size, Class III
Vesc Class: III Max. Load (lb.): 5000 Ball Size (in.): 2 Thread Diameter (in.): 1 Stud Length (in.): 2-1/8 Weight (lb.): 2.9 Class II rating 2-inch square steel tubing 5,000-lb. gross load 500-lb. tongue load Trailer hitch balls Meets SAE J684F specs All SAE Classes I, II, III, IV One-piece, solid-steel Chrome finish -
PM05501 – Hitch ball, trailer, 2-5/16-in. ball size, Class IV
Vesc Class: IV Max. Load (lb.): 7500 Ball Size (in.): 2-5/6 Thread Diameter (in.): 1-1/4 Stud Length (in.): 2-1/8 Weight (lb.): 4.0 Class II rating 2-inch solid square steel shank 7,500-lb. gross load 750-lb. tongue load Trailer hitch balls Meets SAE J684F specs All SAE Classes I, II, III, IV One-piece, solid-steel Chrome finish -
PM35100JD – Draw bar attachment (includes (2) PT21096 stainless steel pins
The John Deere Tow and Stow adjustable receiver hitch is a premium quality hitch designed for the pickup truck and SUV owner. Today’s active pickup truck and SUV owners often tow multiple trailers with various hitch ball requirements. The John Deere Tow and Stow receiver hitch comes in 2-ball and 3-ball models that fit most towing applications. In addition to variable ball sizes, this hitch also features adjustable height for a safe, level tow. The John Deere Tow and Stow receiver hitch may be the last hitch you will ever need to purchase. Some of the rugged versatility that you get with the John Deere Tow and Stow hitch: Eliminate the need for multiple ball mounts Rotate the ball to the desired size 3-ball mount has 1-7/8-in., 2-in., and 2-5/16- in. balls 2-ball mount has 2-in.and 2-5/16-in. balls Manufactured from solid steel for a lifetime of reliable towing Black powder coated for a durable and long lasting finish Folds under the vehicle when not in use Eliminates potential for injury caused by walking into the exposed hitch and keeps vehicle storage length to a minimum Class IV tow rating 1,000-lb. tongue weight 10,000-lb. trailer weight Fits any standard 2-in. receiver Raise and lower the hitch in 1-inch increments for a safe, level tow: - Up to a 3-in. drop, - Up to a 3-1/2-in. rise, A 6-1/2-in. total vertical adjustment Be sure to purchase a stainless steel hitch lock with your hitch to ensure the security of the hitch once it is mounted on the vehicle. The 5/8-in. pin fits all class III, IV, and V receivers. The silencer pad is a low-cost accessory that makes towing much quieter. The silencer pad can be used on any 2-in. receiver ball mount. The most versatile Ball Mount on the Market has a Drawbar Attachment option. The Tow and Stow receiver now meets all towing needs with the addition of the draw bar attachment. Designed to easily attach to both the 2- and 3-ball receivers. Maximum GVWR 10,000lbs. -
PT21092 – Receiver hitch lock, stainless steel 5/8-in. Pin
The John Deere Tow and Stow adjustable receiver hitch is a premium quality hitch designed for the pickup truck and SUV owner. Today’s active pickup truck and SUV owners often tow multiple trailers with various hitch ball requirements. The John Deere Tow and Stow receiver hitch comes in 2-ball and 3-ball models that fit most towing applications. In addition to variable ball sizes, this hitch also features adjustable height for a safe, level tow. The John Deere Tow and Stow receiver hitch may be the last hitch you will ever need to purchase. Some of the rugged versatility that you get with the John Deere Tow and Stow hitch: Eliminate the need for multiple ball mounts Rotate the ball to the desired size 3-ball mount has 1-7/8-in., 2-in., and 2-5/16- in. balls 2-ball mount has 2-in.and 2-5/16-in. balls Manufactured from solid steel for a lifetime of reliable towing Black powder coated for a durable and long lasting finish Folds under the vehicle when not in use Eliminates potential for injury caused by walking into the exposed hitch and keeps vehicle storage length to a minimum Class IV tow rating 1,000-lb. tongue weight 10,000-lb. trailer weight Fits any standard 2-in. receiver Raise and lower the hitch in 1-inch increments for a safe, level tow: - Up to a 3-in. drop, - Up to a 3-1/2-in. rise, A 6-1/2-in. total vertical adjustment Be sure to purchase a stainless steel hitch lock with your hitch to ensure the security of the hitch once it is mounted on the vehicle. The 5/8-in. pin fits all class III, IV, and V receivers. The silencer pad is a low-cost accessory that makes towing much quieter. The silencer pad can be used on any 2-in. receiver ball mount. The most versatile Ball Mount on the Market has a Drawbar Attachment option. The Tow and Stow receiver now meets all towing needs with the addition of the draw bar attachment. Designed to easily attach to both the 2- and 3-ball receivers. Maximum GVWR 10,000lbs. -
PT21093 – Silencer pad
The John Deere Tow and Stow adjustable receiver hitch is a premium quality hitch designed for the pickup truck and SUV owner. Today’s active pickup truck and SUV owners often tow multiple trailers with various hitch ball requirements. The John Deere Tow and Stow receiver hitch comes in 2-ball and 3-ball models that fit most towing applications. In addition to variable ball sizes, this hitch also features adjustable height for a safe, level tow. The John Deere Tow and Stow receiver hitch may be the last hitch you will ever need to purchase. Some of the rugged versatility that you get with the John Deere Tow and Stow hitch: Eliminate the need for multiple ball mounts Rotate the ball to the desired size 3-ball mount has 1-7/8-in., 2-in., and 2-5/16- in. balls 2-ball mount has 2-in.and 2-5/16-in. balls Manufactured from solid steel for a lifetime of reliable towing Black powder coated for a durable and long lasting finish Folds under the vehicle when not in use Eliminates potential for injury caused by walking into the exposed hitch and keeps vehicle storage length to a minimum Class IV tow rating 1,000-lb. tongue weight 10,000-lb. trailer weight Fits any standard 2-in. receiver Raise and lower the hitch in 1-inch increments for a safe, level tow: - Up to a 3-in. drop, - Up to a 3-1/2-in. rise, A 6-1/2-in. total vertical adjustment Be sure to purchase a stainless steel hitch lock with your hitch to ensure the security of the hitch once it is mounted on the vehicle. The 5/8-in. pin fits all class III, IV, and V receivers. The silencer pad is a low-cost accessory that makes towing much quieter. The silencer pad can be used on any 2-in. receiver ball mount. The most versatile Ball Mount on the Market has a Drawbar Attachment option. The Tow and Stow receiver now meets all towing needs with the addition of the draw bar attachment. Designed to easily attach to both the 2- and 3-ball receivers. Maximum GVWR 10,000lbs. -
PT21096 – Stainless steel pin assembly
The John Deere Tow and Stow adjustable receiver hitch is a premium quality hitch designed for the pickup truck and SUV owner. Today’s active pickup truck and SUV owners often tow multiple trailers with various hitch ball requirements. The John Deere Tow and Stow receiver hitch comes in 2-ball and 3-ball models that fit most towing applications. In addition to variable ball sizes, this hitch also features adjustable height for a safe, level tow. The John Deere Tow and Stow receiver hitch may be the last hitch you will ever need to purchase. Some of the rugged versatility that you get with the John Deere Tow and Stow hitch: Eliminate the need for multiple ball mounts Rotate the ball to the desired size 3-ball mount has 1-7/8-in., 2-in., and 2-5/16- in. balls 2-ball mount has 2-in.and 2-5/16-in. balls Manufactured from solid steel for a lifetime of reliable towing Black powder coated for a durable and long lasting finish Folds under the vehicle when not in use Eliminates potential for injury caused by walking into the exposed hitch and keeps vehicle storage length to a minimum Class IV tow rating 1,000-lb. tongue weight 10,000-lb. trailer weight Fits any standard 2-in. receiver Raise and lower the hitch in 1-inch increments for a safe, level tow: - Up to a 3-in. drop, - Up to a 3-1/2-in. rise, A 6-1/2-in. total vertical adjustment Be sure to purchase a stainless steel hitch lock with your hitch to ensure the security of the hitch once it is mounted on the vehicle. The 5/8-in. pin fits all class III, IV, and V receivers. The silencer pad is a low-cost accessory that makes towing much quieter. The silencer pad can be used on any 2-in. receiver ball mount. The most versatile Ball Mount on the Market has a Drawbar Attachment option. The Tow and Stow receiver now meets all towing needs with the addition of the draw bar attachment. Designed to easily attach to both the 2- and 3-ball receivers. Maximum GVWR 10,000lbs. -
R78325 – 3/8 in. O.D. x 250 ft. Long (9.5 mm O.D. x 76.2 m long)
Thermoplastic Tubing This tubing is used to make: Breakaway coupler drain lines Hydraulic reservoir bleed lines R78325 for 30 and 40 Series Row-Crop Tractors R80623 for 2150, 50 Series Row-Crop and 50 Series Four-Wheel Drive Tractors. Shipped in bulk length of 250 feet. A more economical way of making repairs. -
R80623 – 1/4 in. I.D. x 250 ft. Long (6.81 mm I.D. x 76.2 m long)
Thermoplastic Tubing This tubing is used to make: Breakaway coupler drain lines Hydraulic reservoir bleed lines R78325 for 30 and 40 Series Row-Crop Tractors R80623 for 2150, 50 Series Row-Crop and 50 Series Four-Wheel Drive Tractors. Shipped in bulk length of 250 feet. A more economical way of making repairs. -
RH,BOX WRENCH,BW5075,0.75 STUD
$0.00Impact Box End Wrench, For 3/4" Dia. Stud and 1-1/4" Nut (Across Flats) -
SV1000 Auto Cycle Pump 115V
SV SERIES Hydraulic Torque Wrench PumpThe Most Synchronous Hydraulic Torque Wrench Pump In The IndustryThe SV Series hydraulic torque wrench pump is the perfect synthesis of continuous ratcheting and power to torque. Full range adjustability up to 10,000 PSI / 700 Bar. Made In USA Standard Multi-PortAvailable in 115V and 230VSupplied With 15? (3 Meter) Hydraulic HoseGenuine TorcUP DesignFeaturesTool Selection DisplayIndustrial grade LED membrane switch enables quick selection of tool for auto cycle operation.Powerful 1.5 HP MotorThe permanent magnet motor driving the SV1000 Series runs at 1/3 of the RPM found in other hydraulic pumps. Field-proven gears run cooler and last longer to provide years of trouble free servicePrecise PSI/Bar GaugeRemovable, easy-to-read 4" PSI/Bar gauge for ease of tool torque adjustment and monitoring.Rugged RemoteEach pump includes the 15' low-voltage ergonomic remote operation pendant. The durable design is suited for the harshest environments.Built-In Protective Shroud and Roll CageThe motor and electronics are enclosed in a safety shroud to protect the pump from the elements and other environmental contaminants. For added safety, the pump is also fitted with a sturdy roll cage for lifting and protection.Industrial ReservoirPowder coated aluminum reservoir is lightweight yet durable for operating in the harshest environments. The pump comes standard with a 1.5 gallon reservoir.Easy View Sight GlassSight glass enables operator to monitor reservoir oil levels.Pressure Adjustment KnobThe easily accessible knob allows the user to adjust the pressure output of the pump, increasing or decreasing torque when necessary.Twinline High Pressure Hydraulic HosesEach pump comes standard with one set of 15' twinline hydraulic hoses. The hoses are 4:1 safety rated and made of durable steel mesh in a protective rubberized coating.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. This model is configured for the quadra-torc option - running up to four tools simultaneously. -
SV1000 Auto Cycle Pump 230V
SV SERIES Hydraulic Torque Wrench PumpThe Most Synchronous Hydraulic Torque Wrench Pump In The IndustryThe SV Series hydraulic torque wrench pump is the perfect synthesis of continuous ratcheting and power to torque. Full range adjustability up to 10,000 PSI / 700 Bar. Made In USA Standard Multi-PortAvailable in 115V and 230VSupplied With 15? (3 Meter) Hydraulic HoseGenuine TorcUP DesignFeaturesTool Selection DisplayIndustrial grade LED membrane switch enables quick selection of tool for auto cycle operation.Powerful 1.5 HP MotorThe permanent magnet motor driving the SV1000 Series runs at 1/3 of the RPM found in other hydraulic pumps. Field-proven gears run cooler and last longer to provide years of trouble free servicePrecise PSI/Bar GaugeRemovable, easy-to-read 4" PSI/Bar gauge for ease of tool torque adjustment and monitoring.Rugged RemoteEach pump includes the 15' low-voltage ergonomic remote operation pendant. The durable design is suited for the harshest environments.Built-In Protective Shroud and Roll CageThe motor and electronics are enclosed in a safety shroud to protect the pump from the elements and other environmental contaminants. For added safety, the pump is also fitted with a sturdy roll cage for lifting and protection.Industrial ReservoirPowder coated aluminum reservoir is lightweight yet durable for operating in the harshest environments. The pump comes standard with a 1.5 gallon reservoir.Easy View Sight GlassSight glass enables operator to monitor reservoir oil levels.Pressure Adjustment KnobThe easily accessible knob allows the user to adjust the pressure output of the pump, increasing or decreasing torque when necessary.Twinline High Pressure Hydraulic HosesEach pump comes standard with one set of 15' twinline hydraulic hoses. The hoses are 4:1 safety rated and made of durable steel mesh in a protective rubberized coating.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. This model is configured for the quadra-torc option - running up to four tools simultaneously. -
TU-11 Hydraulic Wrench
TU SERIES Square Drive Hydraulic Torque WrenchThe Most Durable and Uncomplicated Hydraulic Bolting Tool In The IndustryThe TU Series is a dependable workhorse, strong enough to conquer demanding applications with an accuracy +/- 3%. The TU can handle those ultimate applications where the work subjects tools to brutal and unforgiving usage. The TU Square Drive Hydraulic Torque Wrench is the wrench you can rely on when the critical work must get done right…the first time! Made In USA Eight Models From 127 Ft/Lbs to 58,000 Ft/Lbs.Every Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented Mono-Body HousingThis feature is a TorcUP exclusive. The TU Series housing is machined from a single block of 7075 AQ Aluminum, which reduces torsion and flex on the body of the tool under pressure.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Push-Through DriveThe push-through square drive allows the user to switch easily from loosen to tighten without having to remove the drive.Steel Reaction BootThis feature protects the main reaction point of the arm and is field replaceable.Laser Engraved Torque ChartThe dual sided shroud is laser engraved with the torque chart for the TU Series, preventing lost charts during use.Reaction Arm Release ButtonThe release button for the reaction arm is set within the arm as a safety feature, protecting the arm from accidental disengagement.Multi-Tooth Drive SegmentThis design ensures a 27 degree stroke each time the tool fully advances.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. -
TU-2 Hydraulic Wrench
TU SERIES Square Drive Hydraulic Torque WrenchThe Most Durable and Uncomplicated Hydraulic Bolting Tool In The IndustryThe TU Series is a dependable workhorse, strong enough to conquer demanding applications with an accuracy +/- 3%. The TU can handle those ultimate applications where the work subjects tools to brutal and unforgiving usage. The TU Square Drive Hydraulic Torque Wrench is the wrench you can rely on when the critical work must get done right…the first time! Made In USA Eight Models From 127 Ft/Lbs to 58,000 Ft/Lbs.Every Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented Mono-Body HousingThis feature is a TorcUP exclusive. The TU Series housing is machined from a single block of 7075 AQ Aluminum, which reduces torsion and flex on the body of the tool under pressure.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Push-Through DriveThe push-through square drive allows the user to switch easily from loosen to tighten without having to remove the drive.Steel Reaction BootThis feature protects the main reaction point of the arm and is field replaceable.Laser Engraved Torque ChartThe dual sided shroud is laser engraved with the torque chart for the TU Series, preventing lost charts during use.Reaction Arm Release ButtonThe release button for the reaction arm is set within the arm as a safety feature, protecting the arm from accidental disengagement.Multi-Tooth Drive SegmentThis design ensures a 27 degree stroke each time the tool fully advances.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. -
TU-20 Hydraulic Wrench
TU SERIES Square Drive Hydraulic Torque WrenchThe Most Durable and Uncomplicated Hydraulic Bolting Tool In The IndustryThe TU Series is a dependable workhorse, strong enough to conquer demanding applications with an accuracy +/- 3%. The TU can handle those ultimate applications where the work subjects tools to brutal and unforgiving usage. The TU Square Drive Hydraulic Torque Wrench is the wrench you can rely on when the critical work must get done right…the first time! Made In USA Eight Models From 127 Ft/Lbs to 58,000 Ft/Lbs.Every Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented Mono-Body HousingThis feature is a TorcUP exclusive. The TU Series housing is machined from a single block of 7075 AQ Aluminum, which reduces torsion and flex on the body of the tool under pressure.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Push-Through DriveThe push-through square drive allows the user to switch easily from loosen to tighten without having to remove the drive.Steel Reaction BootThis feature protects the main reaction point of the arm and is field replaceable.Laser Engraved Torque ChartThe dual sided shroud is laser engraved with the torque chart for the TU Series, preventing lost charts during use.Reaction Arm Release ButtonThe release button for the reaction arm is set within the arm as a safety feature, protecting the arm from accidental disengagement.Multi-Tooth Drive SegmentThis design ensures a 27 degree stroke each time the tool fully advances.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. -
TU-27 Hydraulic Wrench
TU SERIES Square Drive Hydraulic Torque WrenchThe Most Durable and Uncomplicated Hydraulic Bolting Tool In The IndustryThe TU Series is a dependable workhorse, strong enough to conquer demanding applications with an accuracy +/- 3%. The TU can handle those ultimate applications where the work subjects tools to brutal and unforgiving usage. The TU Square Drive Hydraulic Torque Wrench is the wrench you can rely on when the critical work must get done right…the first time! Made In USA Eight Models From 127 Ft/Lbs to 58,000 Ft/Lbs.Every Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented Mono-Body HousingThis feature is a TorcUP exclusive. The TU Series housing is machined from a single block of 7075 AQ Aluminum, which reduces torsion and flex on the body of the tool under pressure.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Push-Through DriveThe push-through square drive allows the user to switch easily from loosen to tighten without having to remove the drive.Steel Reaction BootThis feature protects the main reaction point of the arm and is field replaceable.Laser Engraved Torque ChartThe dual sided shroud is laser engraved with the torque chart for the TU Series, preventing lost charts during use.Reaction Arm Release ButtonThe release button for the reaction arm is set within the arm as a safety feature, protecting the arm from accidental disengagement.Multi-Tooth Drive SegmentThis design ensures a 27 degree stroke each time the tool fully advances.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. -
TU-3 Hydraulic Wrench
TU SERIES Square Drive Hydraulic Torque WrenchThe Most Durable and Uncomplicated Hydraulic Bolting Tool In The IndustryThe TU Series is a dependable workhorse, strong enough to conquer demanding applications with an accuracy +/- 3%. The TU can handle those ultimate applications where the work subjects tools to brutal and unforgiving usage. The TU Square Drive Hydraulic Torque Wrench is the wrench you can rely on when the critical work must get done right…the first time! Made In USA Eight Models From 127 Ft/Lbs to 58,000 Ft/Lbs.Every Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented Mono-Body HousingThis feature is a TorcUP exclusive. The TU Series housing is machined from a single block of 7075 AQ Aluminum, which reduces torsion and flex on the body of the tool under pressure.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Push-Through DriveThe push-through square drive allows the user to switch easily from loosen to tighten without having to remove the drive.Steel Reaction BootThis feature protects the main reaction point of the arm and is field replaceable.Laser Engraved Torque ChartThe dual sided shroud is laser engraved with the torque chart for the TU Series, preventing lost charts during use.Reaction Arm Release ButtonThe release button for the reaction arm is set within the arm as a safety feature, protecting the arm from accidental disengagement.Multi-Tooth Drive SegmentThis design ensures a 27 degree stroke each time the tool fully advances.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. -
TU-5 Hydraulic Wrench
TU SERIES Square Drive Hydraulic Torque WrenchThe Most Durable and Uncomplicated Hydraulic Bolting Tool In The IndustryThe TU Series is a dependable workhorse, strong enough to conquer demanding applications with an accuracy +/- 3%. The TU can handle those ultimate applications where the work subjects tools to brutal and unforgiving usage. The TU Square Drive Hydraulic Torque Wrench is the wrench you can rely on when the critical work must get done right…the first time! Made In USA Eight Models From 127 Ft/Lbs to 58,000 Ft/Lbs.Every Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented Mono-Body HousingThis feature is a TorcUP exclusive. The TU Series housing is machined from a single block of 7075 AQ Aluminum, which reduces torsion and flex on the body of the tool under pressure.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Push-Through DriveThe push-through square drive allows the user to switch easily from loosen to tighten without having to remove the drive.Steel Reaction BootThis feature protects the main reaction point of the arm and is field replaceable.Laser Engraved Torque ChartThe dual sided shroud is laser engraved with the torque chart for the TU Series, preventing lost charts during use.Reaction Arm Release ButtonThe release button for the reaction arm is set within the arm as a safety feature, protecting the arm from accidental disengagement.Multi-Tooth Drive SegmentThis design ensures a 27 degree stroke each time the tool fully advances.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. -
TU-60 Hydraulic Wrench
TU SERIES Square Drive Hydraulic Torque WrenchThe Most Durable and Uncomplicated Hydraulic Bolting Tool In The IndustryThe TU Series is a dependable workhorse, strong enough to conquer demanding applications with an accuracy +/- 3%. The TU can handle those ultimate applications where the work subjects tools to brutal and unforgiving usage. The TU Square Drive Hydraulic Torque Wrench is the wrench you can rely on when the critical work must get done right…the first time! Made In USA Eight Models From 127 Ft/Lbs to 58,000 Ft/Lbs.Every Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented Mono-Body HousingThis feature is a TorcUP exclusive. The TU Series housing is machined from a single block of 7075 AQ Aluminum, which reduces torsion and flex on the body of the tool under pressure.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Push-Through DriveThe push-through square drive allows the user to switch easily from loosen to tighten without having to remove the drive.Steel Reaction BootThis feature protects the main reaction point of the arm and is field replaceable.Laser Engraved Torque ChartThe dual sided shroud is laser engraved with the torque chart for the TU Series, preventing lost charts during use.Reaction Arm Release ButtonThe release button for the reaction arm is set within the arm as a safety feature, protecting the arm from accidental disengagement.Multi-Tooth Drive SegmentThis design ensures a 27 degree stroke each time the tool fully advances.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. -
TU-7 Hydraulic Wrench
TU SERIES Square Drive Hydraulic Torque WrenchThe Most Durable and Uncomplicated Hydraulic Bolting Tool In The IndustryThe TU Series is a dependable workhorse, strong enough to conquer demanding applications with an accuracy +/- 3%. The TU can handle those ultimate applications where the work subjects tools to brutal and unforgiving usage. The TU Square Drive Hydraulic Torque Wrench is the wrench you can rely on when the critical work must get done right…the first time! Made In USA Eight Models From 127 Ft/Lbs to 58,000 Ft/Lbs.Every Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented Mono-Body HousingThis feature is a TorcUP exclusive. The TU Series housing is machined from a single block of 7075 AQ Aluminum, which reduces torsion and flex on the body of the tool under pressure.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Push-Through DriveThe push-through square drive allows the user to switch easily from loosen to tighten without having to remove the drive.Steel Reaction BootThis feature protects the main reaction point of the arm and is field replaceable.Laser Engraved Torque ChartThe dual sided shroud is laser engraved with the torque chart for the TU Series, preventing lost charts during use.Reaction Arm Release ButtonThe release button for the reaction arm is set within the arm as a safety feature, protecting the arm from accidental disengagement.Multi-Tooth Drive SegmentThis design ensures a 27 degree stroke each time the tool fully advances.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. -
TX-1 1 ” 6 pt. Ratchet Link
TX Series Low Profile Hydraulic Torque WrenchThe Flattest And Most Tight Fitting Hydraulic Bolting Tool In The IndustryThe TX series is the "go-to" wrench when standard industrial torque tools are limited by size in their ability to engage the fastener. The TX eliminates issues around the nut, behind the nut and above the nut. On applications with extended stud protrusion, the TX easily slips over to get the torque applied with an accuracy of +/-3%. Made In USA Seven Models From 45 Ft/Lbs to 47,380 Ft/LbsEvery Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented “Peanut-Shaped” PistonThis feature allows the cylinder and ratchet link to be the same width. Friction reducing sliders prevent wear on the piston.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Hex Link CassettesEach link is fitted with steel alignment pins connecting the lower reaction area for added strength.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation.Cylinder and Link MaterialBoth cylinder and link are manufactured from 4340 Aircraft Quality high strength steel alloy.Nose RadiusTight nose radius allows this tool to fit in applications where clearance constraints make other tools too bulky.In-Line Reaction PadThis design ensures torsion-free reaction every time.Link PinOne pin for link to cylinder engagement - no tool required for swapping ratchet links. -
TX-1 1-1/16″ / 27mm Ratchet Link
TX Series Low Profile Hydraulic Torque WrenchThe Flattest And Most Tight Fitting Hydraulic Bolting Tool In The IndustryThe TX series is the "go-to" wrench when standard industrial torque tools are limited by size in their ability to engage the fastener. The TX eliminates issues around the nut, behind the nut and above the nut. On applications with extended stud protrusion, the TX easily slips over to get the torque applied with an accuracy of +/-3%. Made In USA Seven Models From 45 Ft/Lbs to 47,380 Ft/LbsEvery Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented “Peanut-Shaped” PistonThis feature allows the cylinder and ratchet link to be the same width. Friction reducing sliders prevent wear on the piston.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Hex Link CassettesEach link is fitted with steel alignment pins connecting the lower reaction area for added strength.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation.Cylinder and Link MaterialBoth cylinder and link are manufactured from 4340 Aircraft Quality high strength steel alloy.Nose RadiusTight nose radius allows this tool to fit in applications where clearance constraints make other tools too bulky.In-Line Reaction PadThis design ensures torsion-free reaction every time.Link PinOne pin for link to cylinder engagement - no tool required for swapping ratchet links.