N812 – GEARENCH TITAN FLANGE SPREADER

TX Series Low Profile Hydraulic Torque WrenchThe Flattest And Most Tight Fitting Hydraulic Bolting Tool In The IndustryThe TX series is the "go-to" wrench when standard industrial torque tools are limited by size in their ability to engage the fastener. The TX eliminates issues around the nut, behind the nut and above the nut. On applications with extended stud protrusion, the TX easily slips over to get the torque applied with an accuracy of +/-3%. Made In USA Seven Models From 45 Ft/Lbs to 47,380 Ft/LbsEvery Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented “Peanut-Shaped” PistonThis feature allows the cylinder and ratchet link to be the same width. Friction reducing sliders prevent wear on the piston.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Hex Link CassettesEach link is fitted with steel alignment pins connecting the lower reaction area for added strength.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation.Cylinder and Link MaterialBoth cylinder and link are manufactured from 4340 Aircraft Quality high strength steel alloy.Nose RadiusTight nose radius allows this tool to fit in applications where clearance constraints make other tools too bulky.In-Line Reaction PadThis design ensures torsion-free reaction every time.Link PinOne pin for link to cylinder engagement - no tool required for swapping ratchet links.

TX Series Low Profile Hydraulic Torque Wrench The Flattest And Most Tight Fitting Hydraulic Bolting Tool In The Industry The TX series is the "go-to" wrench when standard industrial torque tools are limited by size in their ability to engage the fastener. The TX eliminates issues around the nut, behind the nut and above the nut. On applications with extended stud protrusion, the TX easily slips over to get the torque applied with an accuracy of +/-3%. Made In USA Seven Models From 45 Ft/Lbs to 47,380 Ft/Lbs Every Unit Calibrated In ISO17025 Laboratory Manufactured With AQ Certified Alloys Genuine TorcUP Design Features Patented “Peanut-Shaped” Piston This feature allows the cylinder and ratchet link to be the same width. Friction reducing sliders prevent wear on the piston. Dual Independent Swivels The unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points. Hex Link Cassettes Each link is fitted with steel alignment pins connecting the lower reaction area for added strength. No Drip Quick Connect Couplers These 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. Cylinder and Link Material Both cylinder and link are manufactured from 4340 Aircraft Quality high strength steel alloy. Nose Radius Tight nose radius allows this tool to fit in applications where clearance constraints make other tools too bulky. In-Line Reaction Pad This design ensures torsion-free reaction every time. Link Pin One pin for link to cylinder engagement - no tool required for swapping ratchet links.