Bearings
Showing 1–45 of 49 results
-
PM87MS-S-ZP – Pressed Bearing Flange Housing
Housing size (inch): 87MSBearing shaft size (inch): 1-1/8 1.535Disk harrow: PMDS210TTR4 -
PMG90MSA-ZP – Pressed Bearing Flange Housing
Housing size (inch): 90MS MSA ( contains a grease fitting and grease groove.)Bearing shaft size (inch): 1-1/8 1.785Disk harrow: PMDS210RR12, PMDS210TT5, PMDS210TTR5R -
PMG90MSB-ZP – Pressed Bearing Flange Housing
Housing size (inch): 90MS MSB ( contains a grease groove )Bearing shaft size (inch): 1-7/8 1-15/16Extended inner ring: AE37353, AH66434Wide inner ring: AH10199, AFH203667 - bearing kitDisk harrow: PMDS210TT2, PMDS210TTR2Locking collar: AH10200, AFH203667 - bearing kit w/ locking collar -
TY16239 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 3/4A (in.): 1-1/4B (in.): 3-25/32Bolt size (in.): 3/8Bearing o.d. (mm): 47The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16240 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1A (in.): 1-5/16B (in.): 4-1/8Bolt size (in.): 3/8Bearing o.d. (mm): 52The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16241 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-1/8A (in.): 1-9/16B (in.): 4-5/8Bolt size (in.): 1/2Bearing o.d. (mm): 62The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16242 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-3/16A (in.): 1-9/16B (in.): 4-5/8Bolt size (in.): 1/2Bearing o.d. (mm): 62The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16243 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-1/4A (in.): 1-13/16B (in.): 5-1/8Bolt size (in.): 1/2Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16244 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-3/8A (in.): 1-13/16B (in.): 5-1/8Bolt size (in.): 1/2Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16245 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-7/16A (in.): 1-13/16B (in.): 5-1/8Bolt size (in.): 1/2Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16246 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-1/2A (in.): 1-15/16B (in.): 5-3/8Bolt size (in.): 1/2Bearing o.d. (mm): 80The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16247 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-3/4A (in.): 2-1/16B (in.): 5-7/8Bolt size (in.): 1/2Bearing o.d. (mm): 85The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16248 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-15/16A (in.): 2-3/16B (in.): 6-7/32Bolt size (in.): 5/8Bearing o.d. (mm): 90The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16249 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 2A (in.): 2-7/16B (in.): 6-15/16Bolt size (in.): 5/8Bearing o.d. (mm): 100The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16250 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 2-3/16A (in.): 2-7/16B (in.): 6-15/16Bolt size (in.): 5/8Bearing o.d. (mm): 100The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16251 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 3/4A (in.): 3-3/8B (in.): 2-1/2C (in.): 27/64Bearing o.d. (mm): 47The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16252 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1A (in.): 3-3/4B (in.): 2-3/4C (in.): 29/64Bearing o.d. (mm): 52The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16253 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/8A (in.): 4-1/4B (in.): 3-1/4C (in.): 29/64Bearing o.d. (mm): 52Shaft dia. (in.): 1A (in.): 3-3/4B (in.): 2-3/4C (in.): 29/64Bearing o.d. (mm): 52The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16254 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/16A (in.): 4-1/4B (in.): 3-1/4C (in.): 29/64Bearing o.d. (mm): 62Shaft dia. (in.): 1-1/8A (in.): 4-1/4B (in.): 3-1/4C (in.): 29/64Bearing o.d. (mm): 52Shaft dia. (in.): 1A (in.): 3-3/4B (in.): 2-3/4C (in.): 29/64Bearing o.d. (mm): 52The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16255 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/4A (in.): 4-5/8B (in.): 3-5/8C (in.): 33/64Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16256 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/8A (in.): 4-5/8B (in.): 3-5/8C (in.): 33/64Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16257 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-7/16A (in.): 4-5/8B (in.): 3-5/8C (in.): 33/64Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16258 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/2A (in.): 5-1/8B (in.): 4C (in.): 33/64Bearing o.d. (mm): 80The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16259 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/4A (in.): 5-3/8B (in.): 4-1/8C (in.): 33/64Bearing o.d. (mm): 85The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16260 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-15/16A (in.): 5-5/8B (in.): 4-3/8C (in.): 43/64Bearing o.d. (mm): 90The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16261 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 2A (in.): 6-3/8B (in.): 5-1/8C (in.): 43/64Bearing o.d. (mm): 100The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16262 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 2-3/16A (in.): 6-3/8B (in.): 5-1/8C (in.): 43/64Bearing o.d. (mm): 100The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16263 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 3/4A (in.): 2-9/16B (in.): 4-13/32C (in.): 3-17/32D (in.): 25/64Bearing o.d. (mm): 47The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16264 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1A (in.): 2-3/4B (in.): 4-7/8C (in.): 3-29/32D (in.): 15/32Bearing o.d. (mm): 52The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16265 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/8 A (in.): 3-1/8 B (in.): 5-9/16 C (in.): 4-19/32 D (in.): 29/64 Bearing o.d. (mm): 62 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16266 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/16 A (in.): 3-1/8 B (in.): 5-9/16 C (in.): 4-19/32 D (in.): 29/64 Bearing o.d. (mm): 62 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16267 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/4 A (in.): 3-5/8 B (in.): 6-1/8 C (in.): 5-1/8 D (in.): 33/64 Bearing o.d. (mm): 72 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16268 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/8 A (in.): 3-5/8 B (in.): 6-1/8 C (in.): 5-1/8 D (in.): 33/64 Bearing o.d. (mm): 72 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16269 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-7/16 A (in.): 3-5/8 B (in.): 6-1/8 C (in.): 5-1/8 D (in.): 33/64 Bearing o.d. (mm): 72 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16270 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/2 A (in.): 4-1/8 B (in.): 6-3/4 C (in.): 5-21/32 D (in.): 33/64 Bearing o.d. (mm): 80 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16271 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/4 A (in.): 4-3/8 B (in.): 7-1/16 C (in.): 5-53/64 D (in.): 33/64 Bearing o.d. (mm): 85 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16272 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-15/16 A (in.): 4-9/16 B (in.): 7-1/16 C (in.): 6-3/16 D (in.): 43/64 Bearing o.d. (mm): 90 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16286 – Bearing and Locking Collar
Shaft dia. (in.): 3/4 -
TY16287 – Bearing and Locking Collar
Shaft dia. (in.): 1 -
TY16288 – Bearing and Locking Collar
Shaft dia. (in.): 1-1/8 -
TY16289 – Bearing and Locking Collar
Shaft dia. (in.): 1-3/16 -
TY16290 – Bearing and Locking Collar
Shaft dia. (in.): 1-1/4 -
TY16291 – Bearing and Locking Collar
Shaft dia. (in.): 1-3/8 -
TY16292 – Bearing and Locking Collar
Shaft dia. (in.): 1-7/16 -
TY16293 – Bearing and Locking Collar
Shaft dia. (in.): 1-1/2