Gas and Flame Detection Systems
Showing 1036–1080 of 2984 results
-
Oldham Simtronics AS021 Circular duct mounting kit (Diam. 600 mm)
$1,650.00Circular duct mounting kit (Diam. 600 mm). Part number AS021 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $1,650.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS022 Flat duct mounting kit (Double union coupler)
$580.00Flat duct mounting kit (Double union coupler). Part number AS022 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $580.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS023 Flat duct mounting kit (Quick coupler)
$750.00Flat duct mounting kit (Quick coupler). Part number AS023 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $750.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS024 Circular duct mounting kit (Diam. 200 mm)
$1,550.00Circular duct mounting kit (Diam. 200 mm). Part number AS024 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $1,550.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS025 Circular duct mounting kit (Diam. 400 mm)
$2,070.00Circular duct mounting kit (Diam. 400 mm). Part number AS025 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $2,070.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS026 Circular duct mounting kit (Diam. 450 mm)
$1,550.00Circular duct mounting kit (Diam. 450 mm). Part number AS026 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $1,550.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS027 Circular duct mounting kit (Diam. 300 mm)
$1,550.00Circular duct mounting kit (Diam. 300 mm). Part number AS027 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $1,550.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS034-X Measuring chamber flow for sampling applications
$1,100.00What is the Oldham Simtronics AS034-X?The Oldham Simtronics AS034-X is: Measuring chamber flow for sampling applications. The GD10P and GD10PE are point gas detectors built on non dispersive infrared (NDIR) detection, using a solid state infrared source flashing at 32 Hz across a dual wavelength, dual path optical bench. Because detection is optical rather than chemical, the detector needs no oxygen to measure correctly and works in an inert gas atmosphere, cannot be poisoned by silicon vapours or hydrogen sulphide, is unaffected by gas velocity, and has no saturation effect, so it can read up to 100% volume. Calibration is factory set and no field recalibration is needed. The GD10PE is the version built for critical applications with large volumes of air at high velocity, where low gas concentrations must be caught quickly, such as HVAC and air generator intakes serving inhabited areas and gas turbine installations.About the GD10P / GD10PE Point IR Gas Detectors lineThis part is an accessory for the GD10P / GD10PE Point IR Gas Detectors line. The specification below describes the detectors it is used with, not the accessory itself.Detection method: infrared absorption, dual wavelength, dual path, with a solid state 32 Hz flash IR sourceGases detected: hydrocarbon gases and carbon dioxide; the target gas and scale are fixed by the ordered part numberAccuracy: plus or minus 3% of full scale between 0 and 50% of reading, plus or minus 5% between 50 and 100%Lifetime stability: plus or minus 5% of full scale readingResponse time: T20 0.7 s, T50 1.7 s, T90 4.0 s (fast option: 0.2 s, 0.4 s, 1.0 s)Start-up 65 s typical; 30 minutes warm up to full specification performanceOutput: 4-20 mA current source as standard, current sink as an option, maximum load impedance 500 ohmContinuous self-test, with dirty optics warning at 55% signal attenuation and dirty optics fault at 70%Suitable for use in SIL 2 and SIL 3 systems, with CSA, IECEx, ATEX and INMETRO approvalsGD10PE variant only: detection range 0-20% LEL (0-1% Vol.) methane; the GD10P target gas and scale are fixed by the ordered part numberWhat should you check before ordering?Teledyne guarantees parts and workmanship for 5 years and the infrared sources for 15 years, which is the figure behind the claim of the longest combined detector and IR source warranty on the market. That warranty is void if parts of unspecified origin are fitted, so a spare bought outside the vendor chain can cost the remaining source cover. The practical consequence of the NDIR bench is maintenance cost rather than performance: no chemical reaction means no poisoning by silicon vapours or hydrogen sulphide, and factory calibration means the detector is not on a recalibration schedule the way a catalytic bead point is.How do the part numbers differ?In this part numbering the output stage is selected by one character: H is the 4-20 mA current source version and J is the current sink version. Every complete description in the 2026 price book follows that rule without exception across 107 rows.Where is it used?Typical service: Fixed point combustible gas monitoring in boiler rooms and process areas; Offshore and onshore petrochemical installations; Inert or oxygen-free atmospheres where catalytic sensors cannot measure; HVAC and air generator intakes serving inhabited areas (GD10PE); High temperature areas of gas turbine installations (GD10PE).How do I order or get a quote?PE Energy supplies the Oldham Simtronics AS034-X on a quote basis: send the part number with your application details and we return pricing and lead time. Fixed gas and flame detection is quoted rather than listed because most references ship configured for target gas, range, approval scope and cable entry, and those choices are fixed at the part number. This part belongs to the same product line as the GD10P IR point gas detector already in our catalogue. -
Oldham Simtronics AS039 Protection visor (supplied as standard)
$70.00Protection visor (supplied as standard). Part number AS039 belongs to the Teledyne Gas and Flame Detection (Simtronics) MultiFlame DF-TV7 product line. List price $70.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics MultiFlame DF-TV7 Optical Flame Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS040 Protection visor (long, open). Replace AS039 if required. Restriction of vertical upper angle
$105.00Protection visor (long, open). Replace AS039 if required. Restriction of vertical upper angle. Part number AS040 belongs to the Teledyne Gas and Flame Detection (Simtronics) MultiFlame DF-TV7 product line. List price $105.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics MultiFlame DF-TV7 Optical Flame Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS041 Protection visor (long, narrow). Replace AS039 if required. Restriction of horizontal and vertical upper angle
$200.00Protection visor (long, narrow). Replace AS039 if required. Restriction of horizontal and vertical upper angle. Part number AS041 belongs to the Teledyne Gas and Flame Detection (Simtronics) MultiFlame DF-TV7 product line. List price $200.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics MultiFlame DF-TV7 Optical Flame Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS045 Air shield for MultiFlame detectors
$1,890.00Air shield for MultiFlame detectors. Part number AS045 belongs to the Teledyne Gas and Flame Detection (Simtronics) MultiFlame DF-TV7 product line. List price $1,890.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics MultiFlame DF-TV7 Optical Flame Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS047 Protection display for MultiXplo DG-TX7, MultiTox DGi-TT7 and DG-TT7
$40.00Protection display for MultiXplo DG-TX7, MultiTox DGi-TT7 and DG-TT7. Part number AS047 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $40.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS048-X SS316L Wall-mount Fixing ball-pivot (swivel) for MultiFlame DF-TV7
$245.00What is the Oldham Simtronics AS048-X?The Oldham Simtronics AS048-X is: SS316L Wall-mount Fixing ball-pivot (swivel) for MultiFlame DF-TV7 (2" or 2,5" pipe mounting compatible with AS057/AS058). The MultiFlame DF-TV7 is an optical flame detector for hydrocarbon fires, designed around minimising false alarms and fitted with an intelligent optical self-test. The family has two detection technologies: the DF-TV7-T reads three separate infrared wavelengths and detects hydrocarbon fires up to 80 metres away, and the DF-TV7-V combines ultraviolet with double infrared for higher immunity to false alarms and a shorter response time, detecting hydrocarbon fires up to 45 metres away. The detector connects directly to conventional fire controllers or to a PLC, and a DF-RV7 variant exists for the addressable SYNTEL network. Configuration, including time delay, sensitivity and output behaviour, is done with the TLU600 hazardous area remote terminal or over HART with a TLH710 or TLH720. The MultiFlame DF-TV7 Flame Detectors group in the 2026 price book lists 35 orderable part numbers, and this one is the 316L stainless steel build.What are the specifications of the MultiFlame DF-TV7 Flame Detectors?Detection technologies: triple infrared (DF-TV7-T) and ultraviolet with double infrared (DF-TV7-V)Detection distance: up to 80 m for the triple IR version, up to 45 m for the UV/2IR versionField of view up to 120 degrees, per the vendor product overviewOutputs: 4-20 mA, relays, HART as an option, and LonWorks for the SYNTEL systemPower supply 24 V DC (18 to 35 V DC on DF-T#7 versions, 18 to 30 V DC on DF-R#7)Typical power consumption 1.4 W for IR3 and 1.5 W for UV2IR, 5 W maximumOperating and storage temperature: -40 C to +65 CHumidity 95% RH non condensing, protection rating IP66Explosion proof housing in 316 L stainless steel, weight 5.1 kgPerformance certified to EN 54-10/A1, RFI and EMI to EN 50130-4, SIL 2 capableWhat should you check before ordering?The two technologies in this family are not interchangeable and the difference is measurable rather than a matter of preference: the triple IR version reaches 80 metres and is aimed at smoky hydrocarbon fires that are hard to see optically, while the UV/2IR version trades reach for speed and false alarm immunity and reaches 45 metres. Published MTBF also separates them, at 172,000 hours for the DF-TV7-T against 115,000 hours for the DF-TV7-V. One exception is worth catching at specification time: the manual states that reference DF-V7-XT0-0-0-0---1 is neither EN 54-10 compliant nor SIL compliant, so a site with an EN 54-10 requirement cannot take that particular reference.How do the part numbers differ?Part numbers separate the detection technology (XT for triple infrared, XV for ultraviolet with double infrared), the range (A standard, B long), the output (C configurable, H HART, L LON for the SYNTEL network), and the DF-RV7 prefix marks the addressable SYNTEL variant. Published detection distances are test figures: sensitivity in the field also depends on fuel type, fire size, atmospheric conditions such as wind, rain and fog, and the angle between the fire and the detector.Where is it used?Typical service: Refineries and chemical plants; Drilling and production platforms, and FPSO vessels; Fuel loading facilities and compressor stations; LNG and LPG processing and storage; Gas turbines and aircraft hangars; Stadia and gymnasia.How do I order or get a quote?PE Energy supplies the Oldham Simtronics AS048-X on a quote basis: send the part number with your application details and we return pricing and lead time. Fixed gas and flame detection is quoted rather than listed because most references ship configured for target gas, range, approval scope and cable entry, and those choices are fixed at the part number. This part belongs to the same product line as the MultiFlame DF-TV7 optical flame detector line already in our catalogue. -
Oldham Simtronics AS049 Wall-mounting adapter plate BT05 (EX05 series) / BT606 (DM/DMi series) / BT10
$135.00Wall-mounting adapter plate BT05 (EX05 series) / BT606 (DM/DMi series) / BT10. Part number AS049 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $135.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS050-1 Laser aimer bracket
$2,480.00What is the Oldham Simtronics AS050-1?The Oldham Simtronics AS050-1 is: Laser aimer bracket. The MultiFlame DF-TV7 is an optical flame detector for hydrocarbon fires, designed around minimising false alarms and fitted with an intelligent optical self-test. The family has two detection technologies: the DF-TV7-T reads three separate infrared wavelengths and detects hydrocarbon fires up to 80 metres away, and the DF-TV7-V combines ultraviolet with double infrared for higher immunity to false alarms and a shorter response time, detecting hydrocarbon fires up to 45 metres away. The detector connects directly to conventional fire controllers or to a PLC, and a DF-RV7 variant exists for the addressable SYNTEL network. Configuration, including time delay, sensitivity and output behaviour, is done with the TLU600 hazardous area remote terminal or over HART with a TLH710 or TLH720.About the MultiFlame DF-TV7 Flame Detectors lineThis part is an accessory for the MultiFlame DF-TV7 Flame Detectors line. The specification below describes the detectors it is used with, not the accessory itself.Detection technologies: triple infrared (DF-TV7-T) and ultraviolet with double infrared (DF-TV7-V)Detection distance: up to 80 m for the triple IR version, up to 45 m for the UV/2IR versionField of view up to 120 degrees, per the vendor product overviewOutputs: 4-20 mA, relays, HART as an option, and LonWorks for the SYNTEL systemPower supply 24 V DC (18 to 35 V DC on DF-T#7 versions, 18 to 30 V DC on DF-R#7)Typical power consumption 1.4 W for IR3 and 1.5 W for UV2IR, 5 W maximumOperating and storage temperature: -40 C to +65 CHumidity 95% RH non condensing, protection rating IP66Explosion proof housing in 316 L stainless steel, weight 5.1 kgPerformance certified to EN 54-10/A1, RFI and EMI to EN 50130-4, SIL 2 capableWhat should you check before ordering?The two technologies in this family are not interchangeable and the difference is measurable rather than a matter of preference: the triple IR version reaches 80 metres and is aimed at smoky hydrocarbon fires that are hard to see optically, while the UV/2IR version trades reach for speed and false alarm immunity and reaches 45 metres. Published MTBF also separates them, at 172,000 hours for the DF-TV7-T against 115,000 hours for the DF-TV7-V. One exception is worth catching at specification time: the manual states that reference DF-V7-XT0-0-0-0---1 is neither EN 54-10 compliant nor SIL compliant, so a site with an EN 54-10 requirement cannot take that particular reference.How do the part numbers differ?Part numbers separate the detection technology (XT for triple infrared, XV for ultraviolet with double infrared), the range (A standard, B long), the output (C configurable, H HART, L LON for the SYNTEL network), and the DF-RV7 prefix marks the addressable SYNTEL variant. Published detection distances are test figures: sensitivity in the field also depends on fuel type, fire size, atmospheric conditions such as wind, rain and fog, and the angle between the fire and the detector.Where is it used?Typical service: Refineries and chemical plants; Drilling and production platforms, and FPSO vessels; Fuel loading facilities and compressor stations; LNG and LPG processing and storage; Gas turbines and aircraft hangars; Stadia and gymnasia.How do I order or get a quote?PE Energy supplies the Oldham Simtronics AS050-1 on a quote basis: send the part number with your application details and we return pricing and lead time. Fixed gas and flame detection is quoted rather than listed because most references ship configured for target gas, range, approval scope and cable entry, and those choices are fixed at the part number. This part belongs to the same product line as the MultiFlame DF-TV7 optical flame detector line already in our catalogue. -
Oldham Simtronics AS050-2 Laser aimer
$2,885.00What is the Oldham Simtronics AS050-2?The Oldham Simtronics AS050-2 is: Laser aimer. The MultiFlame DF-TV7 is an optical flame detector for hydrocarbon fires, designed around minimising false alarms and fitted with an intelligent optical self-test. The family has two detection technologies: the DF-TV7-T reads three separate infrared wavelengths and detects hydrocarbon fires up to 80 metres away, and the DF-TV7-V combines ultraviolet with double infrared for higher immunity to false alarms and a shorter response time, detecting hydrocarbon fires up to 45 metres away. The detector connects directly to conventional fire controllers or to a PLC, and a DF-RV7 variant exists for the addressable SYNTEL network. Configuration, including time delay, sensitivity and output behaviour, is done with the TLU600 hazardous area remote terminal or over HART with a TLH710 or TLH720.About the MultiFlame DF-TV7 Flame Detectors lineThis part is an accessory for the MultiFlame DF-TV7 Flame Detectors line. The specification below describes the detectors it is used with, not the accessory itself.Detection technologies: triple infrared (DF-TV7-T) and ultraviolet with double infrared (DF-TV7-V)Detection distance: up to 80 m for the triple IR version, up to 45 m for the UV/2IR versionField of view up to 120 degrees, per the vendor product overviewOutputs: 4-20 mA, relays, HART as an option, and LonWorks for the SYNTEL systemPower supply 24 V DC (18 to 35 V DC on DF-T#7 versions, 18 to 30 V DC on DF-R#7)Typical power consumption 1.4 W for IR3 and 1.5 W for UV2IR, 5 W maximumOperating and storage temperature: -40 C to +65 CHumidity 95% RH non condensing, protection rating IP66Explosion proof housing in 316 L stainless steel, weight 5.1 kgPerformance certified to EN 54-10/A1, RFI and EMI to EN 50130-4, SIL 2 capableWhat should you check before ordering?The two technologies in this family are not interchangeable and the difference is measurable rather than a matter of preference: the triple IR version reaches 80 metres and is aimed at smoky hydrocarbon fires that are hard to see optically, while the UV/2IR version trades reach for speed and false alarm immunity and reaches 45 metres. Published MTBF also separates them, at 172,000 hours for the DF-TV7-T against 115,000 hours for the DF-TV7-V. One exception is worth catching at specification time: the manual states that reference DF-V7-XT0-0-0-0---1 is neither EN 54-10 compliant nor SIL compliant, so a site with an EN 54-10 requirement cannot take that particular reference.How do the part numbers differ?Part numbers separate the detection technology (XT for triple infrared, XV for ultraviolet with double infrared), the range (A standard, B long), the output (C configurable, H HART, L LON for the SYNTEL network), and the DF-RV7 prefix marks the addressable SYNTEL variant. Published detection distances are test figures: sensitivity in the field also depends on fuel type, fire size, atmospheric conditions such as wind, rain and fog, and the angle between the fire and the detector.Where is it used?Typical service: Refineries and chemical plants; Drilling and production platforms, and FPSO vessels; Fuel loading facilities and compressor stations; LNG and LPG processing and storage; Gas turbines and aircraft hangars; Stadia and gymnasia.How do I order or get a quote?PE Energy supplies the Oldham Simtronics AS050-2 on a quote basis: send the part number with your application details and we return pricing and lead time. Fixed gas and flame detection is quoted rather than listed because most references ship configured for target gas, range, approval scope and cable entry, and those choices are fixed at the part number. This part belongs to the same product line as the MultiFlame DF-TV7 optical flame detector line already in our catalogue. -
Oldham Simtronics AS052 Fixing sling for MultiXplo, MultiTox (DG and DGI) and MultiFlame (DF)
$40.00Fixing sling for MultiXplo, MultiTox (DG and DGI) and MultiFlame (DF). Part number AS052 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $40.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS053-X SS316L mounting plate for DM/DMI/DG/DGI/GD10
$170.00What is the Oldham Simtronics AS053-X?The Oldham Simtronics AS053-X is: SS316L mounting plate for DM/DMI/DG/DGI/GD10 (Add U-bolts ref. AS057-X or AS058-X). The GD10P and GD10PE are point gas detectors built on non dispersive infrared (NDIR) detection, using a solid state infrared source flashing at 32 Hz across a dual wavelength, dual path optical bench. Because detection is optical rather than chemical, the detector needs no oxygen to measure correctly and works in an inert gas atmosphere, cannot be poisoned by silicon vapours or hydrogen sulphide, is unaffected by gas velocity, and has no saturation effect, so it can read up to 100% volume. Calibration is factory set and no field recalibration is needed. The GD10PE is the version built for critical applications with large volumes of air at high velocity, where low gas concentrations must be caught quickly, such as HVAC and air generator intakes serving inhabited areas and gas turbine installations. The GD10P / GD10PE Point IR Gas Detectors group in the 2026 price book lists 157 orderable part numbers, and this one is the 316L stainless steel build.What are the specifications of the GD10P / GD10PE Point IR Gas Detectors?Detection method: infrared absorption, dual wavelength, dual path, with a solid state 32 Hz flash IR sourceGases detected: hydrocarbon gases and carbon dioxide; the target gas and scale are fixed by the ordered part numberAccuracy: plus or minus 3% of full scale between 0 and 50% of reading, plus or minus 5% between 50 and 100%Lifetime stability: plus or minus 5% of full scale readingResponse time: T20 0.7 s, T50 1.7 s, T90 4.0 s (fast option: 0.2 s, 0.4 s, 1.0 s)Start-up 65 s typical; 30 minutes warm up to full specification performanceOutput: 4-20 mA current source as standard, current sink as an option, maximum load impedance 500 ohmContinuous self-test, with dirty optics warning at 55% signal attenuation and dirty optics fault at 70%Suitable for use in SIL 2 and SIL 3 systems, with CSA, IECEx, ATEX and INMETRO approvalsGD10PE variant only: detection range 0-20% LEL (0-1% Vol.) methane; the GD10P target gas and scale are fixed by the ordered part numberWhat should you check before ordering?Teledyne guarantees parts and workmanship for 5 years and the infrared sources for 15 years, which is the figure behind the claim of the longest combined detector and IR source warranty on the market. That warranty is void if parts of unspecified origin are fitted, so a spare bought outside the vendor chain can cost the remaining source cover. The practical consequence of the NDIR bench is maintenance cost rather than performance: no chemical reaction means no poisoning by silicon vapours or hydrogen sulphide, and factory calibration means the detector is not on a recalibration schedule the way a catalytic bead point is.How do the part numbers differ?In this part numbering the output stage is selected by one character: H is the 4-20 mA current source version and J is the current sink version. Every complete description in the 2026 price book follows that rule without exception across 107 rows.Where is it used?Typical service: Fixed point combustible gas monitoring in boiler rooms and process areas; Offshore and onshore petrochemical installations; Inert or oxygen-free atmospheres where catalytic sensors cannot measure; HVAC and air generator intakes serving inhabited areas (GD10PE); High temperature areas of gas turbine installations (GD10PE).How do I order or get a quote?PE Energy supplies the Oldham Simtronics AS053-X on a quote basis: send the part number with your application details and we return pricing and lead time. Fixed gas and flame detection is quoted rather than listed because most references ship configured for target gas, range, approval scope and cable entry, and those choices are fixed at the part number. This part belongs to the same product line as the GD10P IR point gas detector already in our catalogue. -
Oldham Simtronics AS055 ILS calibration magnet for MultiXplo
$45.00ILS calibration magnet for MultiXplo. Part number AS055 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $45.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS056-250 Weather protection for MultiXplo and MultiTox DG (2″ or 2,5″ pipe mounting compatible with AS057/AS058)
$90.00Weather protection for MultiXplo and MultiTox DG (2" or 2,5" pipe mounting compatible with AS057/AS058). Part number AS056-250 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $90.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics AS056-450 Weather protection for MultiFlame DF-TV7
$130.00What is the Oldham Simtronics AS056-450?The Oldham Simtronics AS056-450 is: Weather protection for MultiFlame DF-TV7 (2" or 2,5" pipe mounting compatible with AS057/AS058). The MultiFlame DF-TV7 is an optical flame detector for hydrocarbon fires, designed around minimising false alarms and fitted with an intelligent optical self-test. The family has two detection technologies: the DF-TV7-T reads three separate infrared wavelengths and detects hydrocarbon fires up to 80 metres away, and the DF-TV7-V combines ultraviolet with double infrared for higher immunity to false alarms and a shorter response time, detecting hydrocarbon fires up to 45 metres away. The detector connects directly to conventional fire controllers or to a PLC, and a DF-RV7 variant exists for the addressable SYNTEL network. Configuration, including time delay, sensitivity and output behaviour, is done with the TLU600 hazardous area remote terminal or over HART with a TLH710 or TLH720.About the MultiFlame DF-TV7 Flame Detectors lineThis part is an accessory for the MultiFlame DF-TV7 Flame Detectors line. The specification below describes the detectors it is used with, not the accessory itself.Detection technologies: triple infrared (DF-TV7-T) and ultraviolet with double infrared (DF-TV7-V)Detection distance: up to 80 m for the triple IR version, up to 45 m for the UV/2IR versionField of view up to 120 degrees, per the vendor product overviewOutputs: 4-20 mA, relays, HART as an option, and LonWorks for the SYNTEL systemPower supply 24 V DC (18 to 35 V DC on DF-T#7 versions, 18 to 30 V DC on DF-R#7)Typical power consumption 1.4 W for IR3 and 1.5 W for UV2IR, 5 W maximumOperating and storage temperature: -40 C to +65 CHumidity 95% RH non condensing, protection rating IP66Explosion proof housing in 316 L stainless steel, weight 5.1 kgPerformance certified to EN 54-10/A1, RFI and EMI to EN 50130-4, SIL 2 capableWhat should you check before ordering?The two technologies in this family are not interchangeable and the difference is measurable rather than a matter of preference: the triple IR version reaches 80 metres and is aimed at smoky hydrocarbon fires that are hard to see optically, while the UV/2IR version trades reach for speed and false alarm immunity and reaches 45 metres. Published MTBF also separates them, at 172,000 hours for the DF-TV7-T against 115,000 hours for the DF-TV7-V. One exception is worth catching at specification time: the manual states that reference DF-V7-XT0-0-0-0---1 is neither EN 54-10 compliant nor SIL compliant, so a site with an EN 54-10 requirement cannot take that particular reference.How do the part numbers differ?Part numbers separate the detection technology (XT for triple infrared, XV for ultraviolet with double infrared), the range (A standard, B long), the output (C configurable, H HART, L LON for the SYNTEL network), and the DF-RV7 prefix marks the addressable SYNTEL variant. Published detection distances are test figures: sensitivity in the field also depends on fuel type, fire size, atmospheric conditions such as wind, rain and fog, and the angle between the fire and the detector.Where is it used?Typical service: Refineries and chemical plants; Drilling and production platforms, and FPSO vessels; Fuel loading facilities and compressor stations; LNG and LPG processing and storage; Gas turbines and aircraft hangars; Stadia and gymnasia.How do I order or get a quote?PE Energy supplies the Oldham Simtronics AS056-450 on a quote basis: send the part number with your application details and we return pricing and lead time. Fixed gas and flame detection is quoted rather than listed because most references ship configured for target gas, range, approval scope and cable entry, and those choices are fixed at the part number. This part belongs to the same product line as the MultiFlame DF-TV7 optical flame detector line already in our catalogue. -
Oldham Simtronics AS057-X 2 x SS316 U-bolts for 2″ pipe
$55.00What is the Oldham Simtronics AS057-X?The Oldham Simtronics AS057-X is: 2 x SS316 U-bolts for 2" pipe. The GD10P and GD10PE are point gas detectors built on non dispersive infrared (NDIR) detection, using a solid state infrared source flashing at 32 Hz across a dual wavelength, dual path optical bench. Because detection is optical rather than chemical, the detector needs no oxygen to measure correctly and works in an inert gas atmosphere, cannot be poisoned by silicon vapours or hydrogen sulphide, is unaffected by gas velocity, and has no saturation effect, so it can read up to 100% volume. Calibration is factory set and no field recalibration is needed. The GD10PE is the version built for critical applications with large volumes of air at high velocity, where low gas concentrations must be caught quickly, such as HVAC and air generator intakes serving inhabited areas and gas turbine installations. The GD10P / GD10PE Point IR Gas Detectors group in the 2026 price book lists 157 orderable part numbers, and this one is the 316 stainless steel build.What are the specifications of the GD10P / GD10PE Point IR Gas Detectors?Detection method: infrared absorption, dual wavelength, dual path, with a solid state 32 Hz flash IR sourceGases detected: hydrocarbon gases and carbon dioxide; the target gas and scale are fixed by the ordered part numberAccuracy: plus or minus 3% of full scale between 0 and 50% of reading, plus or minus 5% between 50 and 100%Lifetime stability: plus or minus 5% of full scale readingResponse time: T20 0.7 s, T50 1.7 s, T90 4.0 s (fast option: 0.2 s, 0.4 s, 1.0 s)Start-up 65 s typical; 30 minutes warm up to full specification performanceOutput: 4-20 mA current source as standard, current sink as an option, maximum load impedance 500 ohmContinuous self-test, with dirty optics warning at 55% signal attenuation and dirty optics fault at 70%Suitable for use in SIL 2 and SIL 3 systems, with CSA, IECEx, ATEX and INMETRO approvalsGD10PE variant only: detection range 0-20% LEL (0-1% Vol.) methane; the GD10P target gas and scale are fixed by the ordered part numberWhat should you check before ordering?Teledyne guarantees parts and workmanship for 5 years and the infrared sources for 15 years, which is the figure behind the claim of the longest combined detector and IR source warranty on the market. That warranty is void if parts of unspecified origin are fitted, so a spare bought outside the vendor chain can cost the remaining source cover. The practical consequence of the NDIR bench is maintenance cost rather than performance: no chemical reaction means no poisoning by silicon vapours or hydrogen sulphide, and factory calibration means the detector is not on a recalibration schedule the way a catalytic bead point is.How do the part numbers differ?In this part numbering the output stage is selected by one character: H is the 4-20 mA current source version and J is the current sink version. Every complete description in the 2026 price book follows that rule without exception across 107 rows.Where is it used?Typical service: Fixed point combustible gas monitoring in boiler rooms and process areas; Offshore and onshore petrochemical installations; Inert or oxygen-free atmospheres where catalytic sensors cannot measure; HVAC and air generator intakes serving inhabited areas (GD10PE); High temperature areas of gas turbine installations (GD10PE).How do I order or get a quote?PE Energy supplies the Oldham Simtronics AS057-X on a quote basis: send the part number with your application details and we return pricing and lead time. Fixed gas and flame detection is quoted rather than listed because most references ship configured for target gas, range, approval scope and cable entry, and those choices are fixed at the part number. This part belongs to the same product line as the GD10P IR point gas detector already in our catalogue. -
Oldham Simtronics AS058-X 2 x SS316 U-bolts for 2.5″ pipe
$70.00What is the Oldham Simtronics AS058-X?The Oldham Simtronics AS058-X is: 2 x SS316 U-bolts for 2.5" pipe. The GD10P and GD10PE are point gas detectors built on non dispersive infrared (NDIR) detection, using a solid state infrared source flashing at 32 Hz across a dual wavelength, dual path optical bench. Because detection is optical rather than chemical, the detector needs no oxygen to measure correctly and works in an inert gas atmosphere, cannot be poisoned by silicon vapours or hydrogen sulphide, is unaffected by gas velocity, and has no saturation effect, so it can read up to 100% volume. Calibration is factory set and no field recalibration is needed. The GD10PE is the version built for critical applications with large volumes of air at high velocity, where low gas concentrations must be caught quickly, such as HVAC and air generator intakes serving inhabited areas and gas turbine installations. The GD10P / GD10PE Point IR Gas Detectors group in the 2026 price book lists 157 orderable part numbers, and this one is the 316 stainless steel build.What are the specifications of the GD10P / GD10PE Point IR Gas Detectors?Detection method: infrared absorption, dual wavelength, dual path, with a solid state 32 Hz flash IR sourceGases detected: hydrocarbon gases and carbon dioxide; the target gas and scale are fixed by the ordered part numberAccuracy: plus or minus 3% of full scale between 0 and 50% of reading, plus or minus 5% between 50 and 100%Lifetime stability: plus or minus 5% of full scale readingResponse time: T20 0.7 s, T50 1.7 s, T90 4.0 s (fast option: 0.2 s, 0.4 s, 1.0 s)Start-up 65 s typical; 30 minutes warm up to full specification performanceOutput: 4-20 mA current source as standard, current sink as an option, maximum load impedance 500 ohmContinuous self-test, with dirty optics warning at 55% signal attenuation and dirty optics fault at 70%Suitable for use in SIL 2 and SIL 3 systems, with CSA, IECEx, ATEX and INMETRO approvalsGD10PE variant only: detection range 0-20% LEL (0-1% Vol.) methane; the GD10P target gas and scale are fixed by the ordered part numberWhat should you check before ordering?Teledyne guarantees parts and workmanship for 5 years and the infrared sources for 15 years, which is the figure behind the claim of the longest combined detector and IR source warranty on the market. That warranty is void if parts of unspecified origin are fitted, so a spare bought outside the vendor chain can cost the remaining source cover. The practical consequence of the NDIR bench is maintenance cost rather than performance: no chemical reaction means no poisoning by silicon vapours or hydrogen sulphide, and factory calibration means the detector is not on a recalibration schedule the way a catalytic bead point is.How do the part numbers differ?In this part numbering the output stage is selected by one character: H is the 4-20 mA current source version and J is the current sink version. Every complete description in the 2026 price book follows that rule without exception across 107 rows.Where is it used?Typical service: Fixed point combustible gas monitoring in boiler rooms and process areas; Offshore and onshore petrochemical installations; Inert or oxygen-free atmospheres where catalytic sensors cannot measure; HVAC and air generator intakes serving inhabited areas (GD10PE); High temperature areas of gas turbine installations (GD10PE).How do I order or get a quote?PE Energy supplies the Oldham Simtronics AS058-X on a quote basis: send the part number with your application details and we return pricing and lead time. Fixed gas and flame detection is quoted rather than listed because most references ship configured for target gas, range, approval scope and cable entry, and those choices are fixed at the part number. This part belongs to the same product line as the GD10P IR point gas detector already in our catalogue. -
Oldham Simtronics AS062 Ex plug stopping ATEX/IECEX SS316 M20x150 for BT606 and BT10
$52.00Ex plug stopping ATEX/IECEX SS316 M20x150 for BT606 and BT10. Part number AS062 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $52.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics AS063 Ex plug stopping ATEX/IECEX Nickel-plated brass M20x150 for BT606 ans BT10
$27.00Ex plug stopping ATEX/IECEX Nickel-plated brass M20x150 for BT606 ans BT10. Part number AS063 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $27.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics AS064 Ex plug stopping ATEX/IECEX Nickel-plated brass 3/4’’ NPT for BT05
$52.00Ex plug stopping ATEX/IECEX Nickel-plated brass 3/4’’ NPT for BT05. Part number AS064 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $52.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics AS215 Detector stainless steel tag plate (2x80x40mm) SS 316, CUSTOM TEXT
$75.00Detector stainless steel tag plate (2x80x40mm) SS 316, CUSTOM TEXT. Part number AS215 belongs to the Teledyne Gas and Flame Detection (Oldham) MultiTox product line. List price $75.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Product overview: Oldham Simtronics DGi-TT7-E Electrochemical Toxic Gas Detector on PE Energy. Browse all Oldham Simtronics products on the Oldham Simtronics brand page. -
Oldham Simtronics B101060 F100BX Compact Horn and Xenon Strobe Beacon, RED, 230Vac, 100dB, 30mA, Xenon 1J
$266.00F100BX Compact Horn and Xenon Strobe Beacon, RED, 230Vac, 100dB, 30mA, Xenon 1J. Part number B101060 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $266.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B101586 Synchronized Strobe L101X – RED, 24Vdc, 5 joules, 250mA
$225.00Synchronized Strobe L101X - RED, 24Vdc, 5 joules, 250mA. Part number B101586 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $225.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B101830 Siren element 8 tones, 230Vac, 100dB, Installation on the top of the column
$167.00Siren element 8 tones, 230Vac, 100dB, Installation on the top of the column - 8 tone adustable by switch, adjustable volume. Part number B101830 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $167.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B102401 Polycarbonate lift flap for BG3, transparent polycarbonate – Allows double action (extinction applications)
$44.00Polycarbonate lift flap for BG3, transparent polycarbonate - Allows double action (extinction applications). Part number B102401 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $44.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B102406 SOLEX 15 Beacon – AMBER, 9-60Vdc, 3.5 joules, 120 to 510mA (240mA sous 24V)
$92.00SOLEX 15 Beacon - AMBER, 9-60Vdc, 3.5 joules, 120 to 510mA (240mA sous 24V). Part number B102406 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $92.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B102631 Xenon Beacon XB4, AMBER, 21 Joules, 240Vac, 185mA
$2,032.00Xenon Beacon XB4, AMBER, 21 Joules, 240Vac, 185mA. Part number B102631 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $2,032.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B102797 BG2E Break glass call point -red painted, Normaly Open, Rs=1,5k, Rfdl=3,3k
$549.00BG2E Break glass call point -red painted, Normaly Open, Rs=1,5k, Rfdl=3,3k. Part number B102797 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $549.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B103071 UNINTERRUPTIBLE POWER SUPPLY CL 12V 5A C24 AB 12Ah, supplied with battery, output 12V
$474.00UNINTERRUPTIBLE POWER SUPPLY CL 12V 5A C24 AB 12Ah, supplied with battery, output 12V - 5A, dimensions 322x248x126mm, weight 6kg. Part number B103071 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $474.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B103120 ROSHNI sounder – WHITE, 110-240Vac, 102 dB(A)max@1m, 12mA max, tone: AFNOR = 94dB(A)@1m20
$92.00ROSHNI sounder - WHITE, 110-240Vac, 102 dB(A)max@1m, 12mA max, tone: AFNOR = 94dB(A)@1m20. Part number B103120 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $92.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B103131 Synchronized Strobe L101X – WHITE, 24Vdc, 5 joules, 250mA
$225.00Synchronized Strobe L101X - WHITE, 24Vdc, 5 joules, 250mA. Part number B103131 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $225.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B103197 SOLEX 10 Beacon – AMBER, 230Vac, 2.5 joules, 12mA
$128.00SOLEX 10 Beacon - AMBER, 230Vac, 2.5 joules, 12mA. Part number B103197 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $128.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B103247 M16 male to M20 female adapter, nickelled brass
$28.00M16 male to M20 female adapter, nickelled brass. Part number B103247 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $28.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B103257 Xenon Beacon XB15, RED, 15 Joules, 24Vdc, 1,1A
$1,619.00Xenon Beacon XB15, RED, 15 Joules, 24Vdc, 1,1A. Part number B103257 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $1,619.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B103266 LED Blinking light element, RED, 230Vac, 25mA, The use of LEDs permits a life duration of up to 100,000 hours
$119.00LED Blinking light element, RED, 230Vac, 25mA, The use of LEDs permits a life duration of up to 100,000 hours. Part number B103266 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $119.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B103285 LED Permanent light element, GREEN, 230Vac, 20mA, The use of LEDs permits a life duration of up to 100,000
$103.00LED Permanent light element, GREEN, 230Vac, 20mA, The use of LEDs permits a life duration of up to 100,000 hours. Part number B103285 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $103.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B103296 BG2E Break glass call point -red painted,NO/NC contact
$463.00BG2E Break glass call point -red painted,NO/NC contact. Part number B103296 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $463.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page. -
Oldham Simtronics B103302 NEXUS 110 Sounder Beacon, RED, 110-230 Vac, Sounder: 40mA – Beacon: 55mA
$358.00NEXUS 110 Sounder Beacon, RED, 110-230 Vac, Sounder: 40mA - Beacon: 55mA. Part number B103302 belongs to the Teledyne Gas and Flame Detection (Oldham) Alarms and accessories product line. List price $358.00 USD per each. Supplied by PE Energy Industrial Supply, Houston, TX. Request a quote for volume pricing, lead time or help choosing the right configuration. Browse all Oldham Simtronics products on the PE Energy Oldham Simtronics brand page.