Jet-Lube

JET-LUBE SILVER PLUS Regular metallic anti-seize compound is designed to provide a protective film against galling and seizure over a wide range of applications. Silver Plus Regular utilizes a water resistant, high temperature complex base grease as a carrier giving it superior ''stay put'' qualities. BENEFITS of using SILVER PLUS  Retains the equipment in serviceable condition. It has a high content of aluminum that eliminates the potential for galvanic corrosion. It also makes it the anti-seize of choice for components made of aluminum and its alloys. Contains micro- sized particles to help lubricate with smooth consistency to quickly coat fine threads and small and large diameter fasteners. Helps to maintain and protect the threads from rust corrosion, seizing, and galling. Has controlled frictional characteristics so that the surfaces of the Nut & Bolt are torque to the designed K-Factor. Assures full hydraulic efficiency by allowing the metal surfaces to slide over each other without metal-to-metal contact. Silver Plus Regular contains micro-sized aluminum as well as other nonmetallic extreme pressure and anti-wear additives. The metallic components make it very conductive and since the primary particles are aluminum, it nearly eliminates the potential for galvanic corrosion. Applications of 69923 SILVER PLUS Specially formulated to prevent excessive over torque issues and has a very high static friction factor of 0.15, the unique blend of complex thickeners to help evenly distribute aluminum and copper flakes unto the metal surfaces to eliminate metal to threaded metal contact. Excellent for use on bolts, nuts, gaskets, pipe fittings, guides and slides, valve assemblies, press fits, cylinder heads, chain drives, pump mountings, forging dies, manway studs, exhaust manifold studs, etc. It is the anti-seize of choice for components made of aluminum and its alloys. Service Rating -65°F to 1800°F -129°C to 982°C

Semi-Synthetic Multipurpose Lubricant (Clear) - NSF H1 Jet-Lube CC LUBE is a state-of-the-art, semi-synthetic, multipurpose lubricant that combines an aluminum complex thickener for extreme water resistance with the latest synthetic ingredients and PTFE to create a transparent, long-lasting, high lubricity lubricant of quality and performance. CC-LUBE is clear, clean, colorless, non-staining, non-drying, biodegradable and unsurpassed in reducing friction, extending machine and equipment life and preventing the formation of rust and corrosion over a broad temperature range. Ideal for roller, needle and plain bearings.   Benefits of using CC-Lube™ Excellent work stability under high loads Highly water-resistant Rust & corrosion inhibitors High strength fluid film Pumpable Timken load – 45 lbs. Multipurpose   Specifications of 70523 CC LUBE™ Base Materials: Aluminum Complex / White Oils & Synthetics Certifications: NSF H1 Registered #048221 (NLGI 1.5) #148198 (NLGI 0), Conforms to FDA Regulations CFR 21 Section 178.3570 for Incidental Food Contact Service Rating: 0°F to 400°F, -18°C to 204°C TDS SDS

Semi-Synthetic Multipurpose Lubricant (Clear) - NSF H1 Jet-Lube CC LUBE is a state-of-the-art, semi-synthetic, multipurpose lubricant that combines an aluminum complex thickener for extreme water resistance with the latest synthetic ingredients and PTFE to create a transparent, long-lasting, high lubricity lubricant of quality and performance. CC-LUBE is clear, clean, colorless, non-staining, non-drying, biodegradable and unsurpassed in reducing friction, extending machine and equipment life and preventing the formation of rust and corrosion over a broad temperature range. Ideal for roller, needle and plain bearings.   Benefits of using CC-Lube™ Excellent work stability under high loads Highly water-resistant Rust & corrosion inhibitors High strength fluid film Pumpable Timken load – 45 lbs. Multipurpose   Specifications of 70550 CC LUBE™ Base Materials: Aluminum Complex / White Oils & Synthetics Certifications: NSF H1 Registered #048221 (NLGI 1.5) #148198 (NLGI 0), Conforms to FDA Regulations CFR 21 Section 178.3570 for Incidental Food Contact Service Rating: 0°F to 400°F, -18°C to 204°C TDS SDS

Citrus Degreaser - NSF C1 Jet-Lube CLEAN-UP PLUS is a high-performance blend of safe organic solvents which quickly dissolve grease, oils, tar and waxes then rinses away. The formula begins to work immediately on contact with stubborn contaminates. CLEAN-UP PLUS™ is ozone-friendly and contains no fluorinated, chlorinated or SARA listed ingredients. Environmentally safe with a slow evaporation rate which allows for deep cleaning and degreasing and leaves a clean surface. Benefits of using Clean-Up Plus™ Replaces 1:1:1 Trichloroethane Residue-free Safe on all metals and most plastics Ozone-friendly Biodegradable Non-flammable but combustible Acid, alkali-free Specifications of 72535 CLEAN-UP PLUS™ Base Materials: Non-Fluorinated & Chlorinated SolventsCertifications: NSF C1 Registered # 144906, Exempt from California VOC reporting contains only LVP-VOC compoundsService Rating: Dielectric strength - >29 KV TDS (Aerosol)SDS

Moisture-Proofing Non-Conductive Lubricant - NSF H1 Jet-Lube SILICONE COMPOUND DM 3 is a premium silicone compound for use in a wide variety of applications. SILICONE COMPOUND DM™'s low volatility, non-melting thickener and high dielectric strength make it the compound of choice for moisture proofing ignition systems, spark plug connections, electrical assemblies, cable and battery terminals and other similar applications. Tubing connections ideal - cable. Benefits of using Silicone Compound DM™ No dropping point Excellent work stability under high loads Highly water-resistant High strength fluid film Pumpable Direct comparison to Dow Corning 111 Dielectric strength-500 volts Timken load – 65 Lbs. Non-toxic Specifications of 73516 SILICONE COMPOUND DM™ 3 Base Materials: SiliconeCertifications: MIL C-21567A (DM-2), MIL S-8660C (DM-3), NATO #S-736, NSF H1 Registered #132225 (DM 2), # 132224 (DM 3)Service Rating: -50°F to 400°F, -46°C to 204°C TDSTDS (DM-2)SDS

Moisture-Proofing Non-Conductive Lubricant - NSF H1 Jet-Lube SILICONE COMPOUND DM 3 is a premium silicone compound for use in a wide variety of applications. SILICONE COMPOUND DM™'s low volatility, non-melting thickener and high dielectric strength make it the compound of choice for moisture proofing ignition systems, spark plug connections, electrical assemblies, cable and battery terminals and other similar applications. Tubing connections ideal - cable.   Benefits of using Silicone Compound DM™ 3 No dropping point Excellent work stability under high loads Highly water-resistant High strength fluid film Pumpable Direct comparison to Dow Corning 111 Dielectric strength-500 volts Timken load – 65 Lbs. Non-toxic   Specifications of 73550 SILICONE COMPOUND DM™ 3 Base Materials: Silicone Certifications: MIL C-21567A (DM-2), MIL S-8660C (DM-3), NATO #S-736, NSF H1 Registered #132225 (DM 2), # 132224 (DM 3) Service Rating: -50°F to 400°F, -46°C to 204°C TDS TDS (DM-2) SDS

74215 - DRILL ROD GREASE

High Temperature Grease KILN GREASE HT 50 GAL. DRUM is a premium lubricant formulated using a high viscosity, highly refined base oil. KILN GREASE HT's base fluid is combined with an aluminum complex thickener which produces a grease with exceptional high temperature, water resistance and high load characteristics. This grease is ideal for use where temperature, water washout and contamination, extreme loads or a combination of these factors are present.   Benefits of using Kiln Grease HT™ Has a dropping point of >450°F Excellent work stability under high loads Highly water-resistant Fortified with rust corrosion inhibitors High strength fluid film High aluminum complex soap content >10% Pumpable   Specifications: Base Materials: Aluminum Complex Service Rating: 0°F to 500°F, -18°C to 260°C TDS SDS

Storage Compound Jet-Lube KORR-GUARD is a water displacing, specialized formula utilizing a unique approach to rust and corrosion prevention. KORR-GUARD is a semi-fluid product for ease of application, and it is slightly over-based to protect against acid fume and oxidation. High strength polymers, graphite, and other naturally occurring, extreme-pressure, and anti-wear additives lock together under pressure to resist galling, seizure, and downhole makeup.   Benefits of using Korr-Guard Water displacing Rust & corrosion resistant Surface active Semi-fluid for easy application Easily flows into the thread roots for displacing moisture Slightly over based to protect against acid fumes or oxidation   Specifications of 78824 KORR-GUARD™ Base Materials: Complex / Petroleum & Synthetic Service Rating: -20°F to 425°F, -29°C to 218°C TDS SDS

90522 - EZY-TURN® #2

90581 - EZY-TURN® #2

Gate Valve & Body Fill Lubricant w/ MoS2 Jet-Lube EZY-TURN® #4 is formulated using food grade polyester base fluids and contains molybdenum disulfide (MoS2) and hydrogen sulfide (H₂S) inhibitors. Ideal for applications requiring maximum hydrocarbon resistance. EZY-TURN® #4 is pumpable to temperatures as low as -40°F (-40°C) when used with a high-pressure lubricator, it retains its consistency at 500°F (260°C) within a valve where oxygen contact is avoided. Note: Not for use with oxygen for strong oxidizers such as hydrogen peroxide or sulfuric acid. Benefits of using EZY-Turn® #4 Polyester based Contains Moly Non-hazardous Heat & water-resistant Biodegradable Pumpable Prevents corrosion Stops leaks Reduces torque Specifications of 92016 EZY-TURN® #4 Base Materials: Inorganic / PolyesterService Rating: >-40° F (-40° C) to >400° F (204° C) It can retain its consistency at 500°F (260°C) within a valve where oxygen contact is excluded. TDS (Stick)TDSSDS (Stick)SDS