Jet-Lube

All-Purpose Grease w/ PTFE - H2 Jet-Lube WHITE LITHIUM GREASE is a premium all-purpose grease that provides superior performance and protection. WHITE LITHIUM GREASE with PTFE penetrates and forms a long lasting protective film that will withstand heavy loads and will not run or wash away.   Benefits of using White Lithium Grease Has a dropping point of >425°F Highly water-resistant Rust & corrosion inhibitors Pumpable High strength fluid film High lithium soap content >10% Pumpable Fortified with PTFE anti-wear additives Timken load - 45 lbs.   Specifications of 50324 WHITE LITHIUM GREASE Base Materials: Lithium / Petroleum Oils Certifications: CFIA listed, NSF Registered H2 Bulk - Reg. #137549 Aerosol - Reg. #137550 Service Rating: 0°F to 370°F, -18°C to 190°C TDS (Aerosol) TDS SDS

All-Purpose Grease w/ PTFE - H2 Jet-Lube WHITE LITHIUM is a premium all-purpose grease that provides superior performance and protection. WHITE LITHIUM GREASE with PTFE penetrates and forms a long lasting protective film that will withstand heavy loads and will not run or wash away.   Benefits of using White Lithium Has a dropping point of >425°F Highly water-resistant Rust & corrosion inhibitors Pumpable High strength fluid film High lithium soap content >10% Pumpable Fortified with PTFE anti-wear additives Timken load - 45 lbs.   Specifications of 50350 WHITE LITHIUM Base Materials: Lithium / Petroleum Oils Certifications: CFIA listed, NSF Registered H2 Bulk - Reg. #137549 Aerosol - Reg. #137550 Service Rating: 0°F to 370°F, -18°C to 190°C TDS (Aerosol) TDS SDS

Water-Based Mold Release Agent JET-LUBE RUBBER LUBRICANT is a water-based, multipurpose, environmentally safe silicone product that contains twice the silicone content of leading aerosols for increased protection. RUBBER LUBRICANT makes assembly of plastic and rubber parts fast and easy. Whether squirted, sprayed, or brushed on, RUBBER LUBRICANT provides a temporary, wet, slippery surface, and then either dries to a thin protective film, or is absorbed into natural or synthetic rubber. As a "Mold Release Agent", the larger silicone content and higher silicone viscosity provides maximum release capacity under even the most severe molding conditions.   Benefits of using Rubber Lubricant™ Water-based High silicone >15% Chemically inert Easy to apply Environmentally safe Excellent lubricity Excellent release properties Low coefficient of friction Non-flammable Will not melt or gum Non-toxic Low foaming Odorless Heat stable Non-staining Non-flammable Ozone-friendly   Specifications of 52033 RUBBER LUBRICANT™ Base Materials: Silicone TDS SDS

Water-Based Silicone Lubricant Jet-Lube EMS is an emulsified, multipurpose lubricant that lubricates, waterproofs and protects while being odorless, tasteless and Non-staining. EMS stops sticking, squeaking and binding of moving parts. It is an excellent release agent and ideal clear, clean lubricant.   Benefits of using EMS™ Non-toxic No VOC's Non-staining Odorless Non-flammable Low Foaming Environmentally safe   Specifications of 52529 EMS™ Base Materials: Silicone TDS SDS

Water-Based Silicone Lubricant Jet-Lube EMS is an emulsified, multipurpose lubricant that lubricates, waterproofs and protects while being odorless, tasteless and Non-staining. EMS stops sticking, squeaking and binding of moving parts. It is an excellent release agent and ideal clear, clean lubricant.   Benefits of using EMS™ Non-toxic No VOC's Non-staining Odorless Non-flammable Low Foaming Environmentally safe   Specifications of 52543 EMS™ Base Materials: Silicone TDS SDS

Industrial Grade Degrease Jet-Lube CLEAN-UP II is a specially formulated, low VOC blend of solvents designed to quickly dissolve and rinse away dirt, grease, grime, oil, tar and wax while being both environmentally responsible and ozone friendly. CLEAN UP II™ contains no chlorinated or fluorinated solvents, no hazardous air pollutants and evaporates residue-free quickly. It is California compliant and acceptable for use in CARB/OTC States. CLEAN UP II starts working immediately on contact, breaking down and dissolving even stubborn contaminants without the use of fluorinated, chlorinated or SARA listed ingredients. It evaporates quickly while cleaning and leaves a residue-free surface. Safe on all metals and some plastics. Caution: Flammable   Benefits of using Clean-Up™ II Replaces 1:1:1 Trichloroethane Fast evaporating Non-corrosive Non-staining Non-chlorinated Residue-free Low VOC's   Specifications of 61442 CLEAN-UP™ II Base Materials: Acetone & Heptane Isomers Flammable Solvents Certifications: California Compliant Service Rating: Dielectric strength & breakdown voltage - 6.3 KV AC TDS (Aerosol) SDS

Cleaner Safety Solvent - NSF K1 An industrial strength, specially formulated blend of non-flammable solvents. CLEAN-UP™ should be used to dissolve grease, oil, wax, paint, grime, dirt and dust. CLEAN-UP does not contain acids or alkalis and will not damage metal surfaces. Not for use in California. See SDS for additional OTC/LADCO state restrictions. In California and other CARB states use CLEAN UP II™.   Benefits of using Clean-Up™ Ozone-friendly Non-flammable Non-staining Low odor Acid & alkali-free   Specifications: Base Materials: Nonflammable Solvents Certifications: NSF K1 Registered Reg# 137558 Service Rating: Dielectric strength - >53 KV TDS (Aerosol) SDS SDS (Aerosol) PDS

Multipurpose Grease (Purple) A mixed soap, calcium-lithium grease boosted with polymers that is ideal for a multitude of onboard applications where both economy and performance are important. MARINE-MP #2 is a smooth, buttery grease with an operating temperature range of -10F to 325F to provide ingle grease use for a variety of applications. It's water resistant, tenacious, and has excellent resistance to the effects of salt spray, heat, water, oxidation, and other adverse conditions common to marine usage. As a result, this product will lower maintenance costs and simplify inventory while providing excellent performance. Ideal for anti-friction and plain bearings.   Benefits of using Marine-MP™ Water-resistant Heavy load EP Package Pumpable Timken Load - 55 lbs.   Specifications of 63024 MARINE MP #2™ Base Materials: Calcium - Lithium / Petroleum Certifications: MILITARY - 915000103 CARD Service Rating: -10°F to 325°F, -23°C to 163°C TDS SDS

Multipurpose Grease - Construction Grade Jet-Lube EP WHITE GREASE is specially designed to meet the ever-increasing requirements for high film strength, higher operating temperatures, greater stability and longer lubricant life. EP WHITE GREASE provides a tough protective film ensuring superior lubrication and extended lubrication intervals. Ideal for wheel bearings.   Benefits of using EP White Grease Non- staining Fortified with rust & corrosion inhibitors Water-resistant Fluid film lubrication properties Non-drying Timken EP Test – 65 lbs.   Specifications of 64016 EP WHITE GREASE Base Materials: Lithium / Petroleum Oils Certifications: MIL-G-18458B (SH) Service Rating: 0°F to 325°F, -18°C to 163°C TDS SDS

Moly Paste Jet-Lube MARINE MOLY is specially formulated molybdenum disulfide (MoS2) marine lubricating paste that provides a low friction shield by "plating" to metal surfaces to reduce bearing temperature. MARINE MOLY™ protects working parts, prevents galling and heat-freeze. It's very tenacious and can be applied by brush or spatula to hot surfaces without running or dripping off. Ideal gears - spur and marine transmission.   Benefits of using Marine Moly™ Water-resistant Non-melting Withstands extreme weather elements Prevents corrosion 300,000 psi strength Lead-free   Specifications of 65016 MARINE MOLY™ Base Materials: Clay / Petroleum Service Rating: -300°F to 750°F, -185°C to 400°C TDS (Aerosol) TDS SDS (Anti-Seize) SDS (Aerosol)

Water Well & Environmental Drilling Compound Jet-Lube BULLSEYE is a high-purity thread compound designed for sensitive water well and other environmental drilling applications requiring the use of a petroleum hydrocarbon-free product. BULLSEYE is formulated from a synergistic blend of vegetable oil and non-metallic, inorganic, EP and anti-wear additives. BULLSEYE provides maximum protection against galling, seizing, and damage to threads while maintaining water well integrity. BULLSEYE is an all-weather product and is completely brushable from 20F (-7C) to 400F (204C) while retaining its buttery texture at temperatures exceeding 400F (204C).   Benefits of using Bullseye™ Petroleum - hydrocarbon-free Corrosion Inhibited Non-toxic Biodegradable Sticks to wet steel No VOC's   Specifications of 66823 BULLSEYE™ Base Materials: Thickener Silica / Vegetable Oils Certifications: Conforms to assembly bill 1953 Eco-Certified Service Rating: 20°F to 400°F, -7°C to 204°C TDS SDS

JET-LUBE SILVER PLUS Regular metallic anti-seize compound is designed to provide a protective film against galling and seizure over a wide range of applications. Silver Plus Regular utilizes a water resistant, high temperature complex base grease as a carrier giving it superior ''stay put'' qualities. BENEFITS of using SILVER PLUS  Retains the equipment in serviceable condition. It has a high content of aluminum that eliminates the potential for galvanic corrosion. It also makes it the anti-seize of choice for components made of aluminum and its alloys. Contains micro- sized particles to help lubricate with smooth consistency to quickly coat fine threads and small and large diameter fasteners. Helps to maintain and protect the threads from rust corrosion, seizing, and galling. Has controlled frictional characteristics so that the surfaces of the Nut & Bolt are torque to the designed K-Factor. Assures full hydraulic efficiency by allowing the metal surfaces to slide over each other without metal-to-metal contact. Silver Plus Regular contains micro-sized aluminum as well as other nonmetallic extreme pressure and anti-wear additives. The metallic components make it very conductive and since the primary particles are aluminum, it nearly eliminates the potential for galvanic corrosion. Applications of 69916 SILVER PLUS Specially formulated to prevent excessive over torque issues and has a very high static friction factor of 0.15, the unique blend of complex thickeners to help evenly distribute aluminum and copper flakes unto the metal surfaces to eliminate metal to threaded metal contact. Excellent for use on bolts, nuts, gaskets, pipe fittings, guides and slides, valve assemblies, press fits, cylinder heads, chain drives, pump mountings, forging dies, manway studs, exhaust manifold studs, etc. It is the anti-seize of choice for components made of aluminum and its alloys. Service Rating -65°F to 1800°F -129°C to 982°C