Jet-Lube
Showing 136–180 of 543 results
-
23915 – HDD COPPER 5 gal pail
$374.71Horizontal Directional Drilling Tool Joint & Drill Collar Compound A premium-quality, unleaded compound containing cooper flake, graphite, and other natural extreme pressure and anti-wear additives. HDD KOPR uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE but in a smaller particle size range to accommodate automatic application systems. Benefits Contains no lead or zinc Extreme pressure additives Rust & corrosion inhibitors Sticks to wet joints Smooth grease base for brushability & stability over a wide temperature range Consistent makeup Unequalled resistance to downhole makeup Specially formulated to meet the requirements of the auto-lube system on most major HDD rigs Low pour point oil for optimum low temperature performance Specifications Base Materials: Anhydrous Calcium / Petroleum Certifications: Not classified as marine pollutant – DOT Approval CA2004080025., Conforms to assembly bill 1953 Service Rating: -55°C to 149°C, -65°F to 300°F Equivalent to Ditch Witch 256-025 5 gal Summer Spray TDR SDS -
23923 – HDD COPPER 1 gal pail
$86.54Horizontal Directional Drilling Tool Joint & Drill Collar Compound A premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. HDD KOPR uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE but in a smaller particle size range to accommodate automatic application systems. Benefits: Contains no lead or zinc Extreme pressure additives Rust & corrosion inhibitors Sticks to wet joints Smooth grease base for brushability & stability over a wide temperature range Consistent makeup Unequalled resistance to downhole makeup Specially formulated to meet the requirements of the auto-lube system on most major HDD rigs Low pour point oil for optimum low temperature performance Specifications: Base Materials: Anhydrous Calcium / Petroleum Certifications: Not classified as marine pollutant – DOT Approval CA2004080025., Conforms to assembly bill 1953 Service Rating: -55°C to 149°C, -65°F to 300°F TDR SDS -
24002 – TFW™
$17.51Multipurpose Thread Sealant w/ PTFE TFW 1/2 PT. BRUSHTOP CAN is a non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications: Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C -
24004 – TFW™
$24.37Multipurpose Thread Sealant w/ PTFE Jetlube TFW 1 PT. BRUSHTOP CAN is a non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications: Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C TDS SDS -
24023 – TFW™
$151.39Multipurpose Thread Sealant w/ PTFE A non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications: Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C -
24024 – JET-LUBE TFW 15 gal drum
$0.93Multipurpose Thread Sealant w/ PTFE TFW 1/2 PT. BRUSHTOP CAN is a non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications of 24024 JET-LUBE TFW 15 gal drum Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C TDS SDS -
24029 – TFW™
$5,437.05Multipurpose Thread Sealant w/ PTFE TFW 50 GAL. DRUM is a non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications: Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C -
24055 – TFW™
$6.36Multipurpose Thread Sealant w/ PTFE TFW 1/4 PT. BRUSHTOP CAN is a non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications: Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C TDS SDS -
24412 – J-89™
$161.52Pumpable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-89's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-89 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Pumpable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum -
24415 – J-89™
$364.95Pumpable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-89's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-89 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Pumpable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum TDS SDS -
24423 – J-89™
$100.20Pumpable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-89's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-89 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Pumpable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum -
24812 – J-75® UNLEADED
$171.10Brushable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-75's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-75 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Brushable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum -
24815 – J-75® UNLEADED
$398.65Brushable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-75's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-75 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Brushable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum -
24823 – J-75® UNLEADED
$95.18Brushable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-75's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-75 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Brushable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum -
25016 – AP-5™
$336.51High-Temp Multipurpose Grease (Black) AP-5 5 gal. pail is formulated from bentone clay, AP-5 is noted for its high temperature insensitivity, its non-melting and does not thicken excessively at temperatures as low as 0F (-18C). It has mechanical stability, is water resistant, displays high stability, provides excellent adhesion to metals, prevents wear and has superior storage life. AP-5 contains molybdenum disulfide, oxidation inhibitors, corrosion inhibitors and metal deactivators. It offers positive protection for extreme services, which require heavy duty lubricant performance. Ideal for oven chains. Benefits of using AP-5™ Rust & corrosion protection Non-melting No Dropping Point Superior storage life Highly adhesive to metal Specifications: Base Materials: Bentone / Lube Oils Service Rating: 0°F to 550°F, -18°C to 288°C TDS SDS -
25024 – AP-5™
$1,101.63High-Temp Multipurpose Grease (Black) AP-5 50 gal. drum is formulated from bentone clay, AP-5 is noted for its high temperature insensitivity, its non-melting and does not thicken excessively at temperatures as low as 0F (-18C). It has mechanical stability, is water resistant, displays high stability, provides excellent adhesion to metals, prevents wear and has superior storage life. AP-5 contains molybdenum disulfide, oxidation inhibitors, corrosion inhibitors and metal deactivators. It offers positive protection for extreme services, which require heavy duty lubricant performance. Ideal for oven chains. Benefits of using AP-5™ Rust & corrosion protection Non-melting No Dropping Point Superior storage life Highly adhesive to metal Specifications: Base Materials: Bentone / Lube Oils Service Rating: 0°F to 550°F, -18°C to 288°C -
25029 – AP-5™
$3,708.79High-Temp Multipurpose Grease (Black) AP-5 15 gal. drum is formulated from bentone clay, AP-5 is noted for its high temperature insensitivity, its non-melting and does not thicken excessively at temperatures as low as 0F (-18C). It has mechanical stability, is water resistant, displays high stability, provides excellent adhesion to metals, prevents wear and has superior storage life. AP-5 contains molybdenum disulfide, oxidation inhibitors, corrosion inhibitors and metal deactivators. It offers positive protection for extreme services, which require heavy duty lubricant performance. Ideal for oven chains. Benefits of using AP-5™ Rust & corrosion protection Non-melting No Dropping Point Superior storage life Highly adhesive to metal Specifications: Base Materials: Bentone / Lube Oils Service Rating: 0°F to 550°F, -18°C to 288°C -
25050 – AP-5™
$11.62High-Temp Multipurpose Grease (Black) AP-5 14 oz. cartridge is formulated from bentone clay, AP-5 is noted for its high temperature insensitivity, its non-melting and does not thicken excessively at temperatures as low as 0F (-18C). It has mechanical stability, is water resistant, displays high stability, provides excellent adhesion to metals, prevents wear and has superior storage life. AP-5 contains molybdenum disulfide, oxidation inhibitors, corrosion inhibitors and metal deactivators. It offers positive protection for extreme services, which require heavy duty lubricant performance. Ideal for oven chains. Benefits of using AP-5™ Rust & corrosion protection Non-melting No Dropping Point Superior storage life Highly adhesive to metal Specifications: Base Materials: Bentone / Lube Oils Service Rating: 0°F to 550°F, -18°C to 288°C TDS SDS -
25816 – JET-LUBE JACKING SYSTEM GREASE ECF 5 gal pail
$402.28Jacking System Grease - Environmental Formula JET-LUBE JACKING SYSTEM GREASE ECF 5 gal pail is safe to use in offshore applications as it's metal-free and formulated to conform to the strict North Sea Environmental Guidelines. Jacking System Grease™ ECF™ utilizes a water-resistant, calcium thickener that is enhanced to improve adhesion and provide greater protection against water wash-off, wear and corrosion. Benefits of using Jacking System Grease™ ECF™ Excellent environmental properties High load resistant Water & corrosion resistant Non-metallic Safe for offshore personnel Biodegradable, non-bioaccumulate Outstanding film strength Easy to apply Specifications: Base Materials: Calcium Sulfonate Certifications: Environmental Rating: UK CEFAS OCNS Group D, Conforms to the strict North Sea Environmental Guidelines, EPA 1311-TCLP, Eco-Certified Service Rating: -4°F to 300°F, -20°C to 149°C TDS SDS -
25829 – JACKING SYSTEM GREASE ECF™
$3,984.87Jacking System Grease - Environmental Formula JET-LUBE JACKING SYSTEM GREASE ECF is safe to use in offshore applications as it's metal-free and formulated to conform to the strict North Sea Environmental Guidelines. Jacking System Grease™ ECF™ utilizes a water-resistant, calcium thickener that is enhanced to improve adhesion and provide greater protection against water washoff, wear and corrosion. Benefits of using Jacking System Grease™ ECF™ Excellent environmental properties High load resistant Water & corrosion resistant Non-metallic Safe for offshore personnel Biodegradable, non-bioaccumulative Outstanding film strength Easy to apply Specifications of 25829 JACKING SYSTEM GREASE ECF™ Base Materials: Calcium Sulfonate Certifications: Conforms to the strict North Sea Environmental Guidelines, EPA 1311-TCLP, Eco-Certified Service Rating: -4°F to 300°F, -20°C to 149°C TDS SDS -
26016 – OG-H™
$294.62Heavy Duty Open Gear Paste Made of highly refined mineral oils, a non-soap thickener, low friction molybdenum disulfide (MoS2) and graphite, rust and corrosion inhibitors, and extreme pressure additives. OG-H has excellent stay put qualities, will not melt or throw off, and is ideal for use at high temperatures where other lubricants become runny or drip off. Being relatively temperature insensitive, OG-H can be used at low temperatures without chipping off or channeling and is completely waterproof. Ideal bearings - sleeve. Ideal gears - edger roller, shovel, ring and bull. Benefits of using OG-H™ Low friction moly Excellent "stay put" qualities Very tacky with high adhesive Easy to apply Highly tenacious Lowers operating temperatures Will not melt off or pound off Specifications: Base Materials: Organo Clay / Lube Oils Service Rating: 0°F to 550°F, -18°C to 285°C -
26019 – OG-H™
$315.09Heavy Duty Open Gear Paste Made of highly refined mineral oils, a non-soap thickener, low friction molybdenum disulfide (MoS2) and graphite, rust and corrosion inhibitors, and extreme pressure additives. OG-H has excellent stay put qualities, will not melt or throw off, and is ideal for use at high temperatures where other lubricants become runny or drip off. Being relatively temperature insensitive, OG-H can be used at low temperatures without chipping off or channeling and is completely waterproof. Ideal bearings - sleeve. Ideal gears - edger roller, shovel, ring and bull. Benefits of using OG-H™ Low friction moly Excellent "stay put" qualities Very tacky with high adhesive Easy to apply Highly tenacious Lowers operating temperatures Will not melt off or pound off Specifications: Base Materials: Organo Clay / Lube Oils Service Rating: 0°F to 550°F, -18°C to 285°C -
26024 – JET-LUBE OG-H OPEN GEAR LUBRICANT 15 gal drum
$757.32Heavy Duty Open Gear Paste Jet-Lube OG-H™ is made of highly refined mineral oils, a non-soap thickener, low friction molybdenum disulfide (MoS2) and graphite, rust and corrosion inhibitors, and extreme pressure additives. OG-H has excellent stay put qualities, will not melt or throw off, and is ideal for use at high temperatures where other lubricants become runny or drip off. Being relatively temperature insensitive, OG-H can be used at low temperatures without chipping off or channeling and is completely waterproof. Ideal bearings - sleeve. Ideal gears - edger roller, shovel, ring and bull. Benefits of using OG-H™ Low friction moly Excellent "stay put" qualities Very tacky with high adhesive Easy to apply Highly tenacious Lowers operating temperatures Will not melt off or pound off Specifications of 26024 JET-LUBE OG-H OPEN GEAR LUBRICANT 15 gal drum Base Materials: Organo Clay / Lube Oils Service Rating: 0°F to 550°F, -18°C to 285°C TDS SDS -
26029 – OG-H™
$2,516.26Heavy Duty Open Gear Paste OG-H 400 LB. 50 GAL. DRUM is made of highly refined mineral oils, a non-soap thickener, low friction molybdenum disulfide (MoS2) and graphite, rust and corrosion inhibitors, and extreme pressure additives. OG-H has excellent stay put qualities, will not melt or throw off, and is ideal for use at high temperatures where other lubricants become runny or drip off. Being relatively temperature insensitive, OG-H can be used at low temperatures without chipping off or channeling and is completely waterproof. Ideal bearings - sleeve. Ideal gears - edger roller, shovel, ring and bull. Benefits of using OG-H™ Low friction moly Excellent "stay put" qualities Very tacky with high adhesive Easy to apply Highly tenacious Lowers operating temperatures Will not melt off or pound off Specifications: Base Materials: Calcium Sulfonate Certifications: Conforms to the strict North Sea Environmental Guidelines, EPA 1311-TCLP, Eco-Certified Service Rating: -4°F to 300°F, -20°C to 149°C -
26050 – OG-H™
$10.94Heavy Duty Open Gear Paste OG-H 14 OZ. CARTRIDGE is made of highly refined mineral oils, a non-soap thickener, low friction molybdenum disulfide (MoS2) and graphite, rust and corrosion inhibitors, and extreme pressure additives. OG-H has excellent stay put qualities, will not melt or throw off, and is ideal for use at high temperatures where other lubricants become runny or drip off. Being relatively temperature insensitive, OG-H can be used at low temperatures without chipping off or channeling and is completely waterproof. Ideal bearings - sleeve. Ideal gears - edger roller, shovel, ring and bull. Benefits of using OG-H™ Low friction moly Excellent "stay put" qualities Very tacky with high adhesive Easy to apply Highly tenacious Lowers operating temperatures Will not melt off or pound off Specifications: Base Materials: Calcium Sulfonate Certifications: Conforms to the strict North Sea Environmental Guidelines, EPA 1311-TCLP, Eco-Certified Service Rating: -4°F to 300°F, -20°C to 149°C TDS SDS -
26203 – MOLY PETROLATUM
$90.40Aircraft Spark Plug Anti-Seize & Thread Lubricant Manufactured to conform to the requirements of Military Specification MIL-T-83483B. MOLY PETROLATUM's intended use is to prevent seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 800°F. It's the ideal anti-seize thread compound where parts are engaged with components fabricated from similar or dissimilar metals. It is also intended to provide corrosion protection to the metal surfaces below 800°F. Benefits of using Moly Petrolatum Lead-free Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Specifications: Base Materials: Wax / Mineral Oils Certifications: MIL-83483E, National Stock Number 8030-00-087-8630 Service Rating: -65°F to 800°F, -54°C to 427°C -
27002 – ZINC DUST PETROLATUM
$19.20Anti-Seize & Thread Lubricant Provides corrosion protection to metal surfaces. ZINC DUST PETROLATUM lowers friction and reduces wrench torque. It is ideally used to prevent seizing during assembly or disassembly of threaded or unthreaded components fabricated from aluminum or its alloys, engaged with components fabricated from similar or dissimilar metals. It is also intended to provide corrosion protection to the metal surfaces. Benefits Prevents galvanic corrosion Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Lowers friction, reduces wrench torque Specifications Base Materials: Wax / Mineral Oils Friction / Nut-Factor: (Nut-Factor) 0.13 Certifications: CID A-A-59313 (formerly MIL-T-22361) Service Rating: -65°F to 788°F, -54°C to 420°C TDS SDS -
27003 – ZINC DUST-PETROLATUM
$30.10Anti-Seize & Thread Lubricant Provides corrosion protection to metal surfaces. ZINC DUST PETROLATUM lowers friction and reduces wrench torque. It is ideally used to prevent seizing during assembly or disassembly of threaded or unthreaded components fabricated from aluminum or its alloys, engaged with components fabricated from similar or dissimilar metals. It is also intended to provide corrosion protection to the metal surfaces. Benefits Prevents galvanic corrosion Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Lowers friction, reduces wrench torque Specifications Base Materials: Wax / Mineral Oils Friction / Nut-Factor: (Nut-Factor) 0.13 Certifications: CID A-A-59313 (formerly MIL-T-22361) Service Rating: -65°F to 788°F, -54°C to 420°C TDS SDS -
27203 – GRAPHITE PETRO
$24.08Anti-Seize GRAPHITE PETRO 500 GM. PLUG TOP CAN is intended to prevent seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 900F (482C). This product contains graphite, which may promote corrosion of aluminum, ferrous, magnesium, zinc or cadmium alloys or plated surfaces and should not be used in contact with these metals where galvanic corrosion conditions exist. Benefits of using Graphite Petrolatum Lowers friction Reduces wrench torque Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Specifications: Base Materials: Wax / Mineral Oils Friction / K-Factor: 0.13 Certifications: SAE-AMS-2518, MIL-T-5544C, NATO Stock Number 9150-99-910-0528 (500 g can), National Stock Number 8030-01-044-5034 (1 lb. can), OSPAR Compliant, Registered by CEFAS in the UK and KPD/SFT in Norway Order under NATO stock number, Eco-Compliant Service Rating: -65°F to 900°F, -54°C to 482°C TDS SDS -
27528 – 769 LUBRICANT®
$2,793.55Lubricant & Penetrant - NSF H2 769 LUBRICANT® 50 GAL. TITE HEAD DRUM is the leading multipurpose, penetrating, lubricating, moisture displacing and corrosion preventative product for use where salt water, salt spray or other harsh environments are present. 769 Lubricant gives total performance while being environmentally safe, easy to use and non-flammable. Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils that provide superior lubricating protection and antiwear properties. Penetrates: Rusted and frozen metal parts studs, nuts, screws, pins, linkages are easily loosened by means of superior creepability. Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin non-greasy film that prevents additional moisture from clinging or entering. Prevents Rust & Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments. Benefits of using 769 Lubricant® Non-flammable Multipurpose Non-evaporating Contains no fluorocarbons Never hardens or dries out Contains no silicones Specifications: Base Materials: Clear Amber Fluid Certifications: NSF H2 Registered #137551 (Bulk), #137644 (Aerosol), MIL-PRF-81309H (Aerosol) Type II & III, Class II, CO2 Grade MIL-PRF-81309H (Bulk) Type II & III, Class I MIL-C-16173E Grade 3 MIL-C-23411A VV-P-216B CID A-A-50493C Class B Type I -
27533 – 769 LUBRICANT®
$69.89Lubricant & Penetrant - NSF H2 769 LUBRICANT® 1 GAL. JUG is the leading multipurpose, penetrating, lubricating, moisture displacing and corrosion preventative product for use where salt water, salt spray or other harsh environments are present. 769 Lubricant gives total performance while being environmentally safe, easy to use and non-flammable. Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils that provide superior lubricating protection and antiwear properties. Penetrates: Rusted and frozen metal parts studs, nuts, screws, pins, linkages are easily loosened by means of superior creepability. Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin non-greasy film that prevents additional moisture from clinging or entering. Prevents Rust & Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments. Benefits of using 769 Lubricant® Non-flammable Multipurpose Non-evaporating Contains no fluorocarbons Never hardens or dries out Contains no silicones Specifications: Base Materials: Clear Amber Fluid Certifications: NSF H2 Registered #137551 (Bulk), #137644 (Aerosol), MIL-PRF-81309H (Aerosol) Type II & III, Class II, CO2 Grade MIL-PRF-81309H (Bulk) Type II & III, Class I MIL-C-16173E Grade 3 MIL-C-23411A VV-P-216B CID A-A-50493C Class B Type I -
27535 – 769 LUBRICANT®
$292.61Lubricant & Penetrant - NSF H2 769 LUBRICANT® 5 GAL. DRUM is the leading multipurpose, penetrating, lubricating, moisture displacing and corrosion preventative product for use where salt water, salt spray or other harsh environments are present. 769 Lubricant gives total performance while being environmentally safe, easy to use and non-flammable. Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils that provide superior lubricating protection and antiwear properties. Penetrates: Rusted and frozen metal parts studs, nuts, screws, pins, linkages are easily loosened by means of superior creepability. Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin non-greasy film that prevents additional moisture from clinging or entering. Prevents Rust & Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments. Benefits of using 769 Lubricant® Non-flammable Multipurpose Non-evaporating Contains no fluorocarbons Never hardens or dries out Contains no silicones Specifications: Base Materials: Clear Amber Fluid Certifications: NSF H2 Registered #137551 (Bulk), #137644 (Aerosol), MIL-PRF-81309H (Aerosol) Type II & III, Class II, CO2 Grade MIL-PRF-81309H (Bulk) Type II & III, Class I MIL-C-16173E Grade 3 MIL-C-23411A VV-P-216B CID A-A-50493C Class B Type I TDS SDS (Aerosol) SDS -
27915 Jet-Lube NCS-30 Arctic 20KG/44LB
$356.98Nonmetallic Thread Compound Jet-Lube NCS-30 Arctic is a premium quality, nonmetallic, non-conductive compound containing natural extreme pressure and anti-wear additives. These are blended into JET-LUBE's all-weather calcium complex base grease. This base grease offers the additional advantage of low temperature application and service, superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. NCS-30 ARCTIC offers the same protection as regular NCS-30, but at lower service temperatures. Especially effective pump or spray application services. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits of using NCS-30 Arctic® Excellent performance on high-chrome or nickel alloys Contains no metals Extreme-pressure additives provide additional protection against seizing & galling Non-conductive for MWD applications Provides maximum protection on Wedge Thread* drill string connection designs High frictional properties ideal for casing drilling applications Pumpability makes it ideal for HDD and other construction drilling applications Specifications of 27915 Jet-Lube NCS-30 Arctic 20KG/44LB Base Materials: Calcium Complex / Petroleum Friction / K-Factor: 1.15 drill strings (Relative to API RP 7G), 1.40 (Relative to API RP 5A3) Certifications: NSF H2 Registered, Conforms to the API RP7G torque charts Service Rating: -40°F to 350°F, -40°C to 177°CC TDS SDS -
27924 – NCS-30 ARCTIC
$950.15Nonmetallic Thread Compound Jet-Lube NCS-30 Arctic is a premium quality, nonmetallic, non-conductive compound containing natural extreme pressure and anti-wear additives. These are blended into JET-LUBE's all-weather calcium complex base grease. This base grease offers the additional advantage of low temperature application and service, superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. NCS-30 ARCTIC offers the same protection as regular NCS-30, but at lower service temperatures. Especially effective pump or spray application services. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits of using NCS-30 Arctic® Excellent performance on high-chrome or nickel alloys Contains no metals Extreme-pressure additives provide additional protection against seizing & galling Non-conductive for MWD applications Provides maximum protection on Wedge Thread* drill string connection designs High frictional properties ideal for casing drilling applications Pumpability makes it ideal for HDD and other construction drilling applications Specifications of 27924 Jet-Lube NCS-30 Arctic Base Materials: Calcium Complex / Petroleum Friction / K-Factor: 1.15 drill strings (Relative to API RP 7G), 1.40 (Relative to API RP 5A3) Certifications: NSF H2 Registered, Conforms to the API RP7G torque charts Service Rating: -40°F to 350°F, -40°C to 177°CC TDS SDS -
28003 – MP-50™
$52.33Moly Paste MP-50 PLUG TOP CAN is a non-melting, lubricating compound that contains a high percentage of low-friction molybdenum disulfide (MoS2). Being a thick paste, it can be applied by brush or spatula. MP-50 is water resistant, withstands extreme weather elements, and helps prevent corrosion on parts exposed to water, steam, most acids and alkalis. Ideal gears - spur and marine transmission. Benefits of using MP-50™ Non-melting 50% Saturated Molybdenum Disulfide (MoS²) Film strength of 300,00 psi High-Temp >750°F (400°C) Density 1117 Prevents corrosion Specifications: Base Materials: Organo Clay & MoS2 / Petroleum Service Rating: -300°F to 750°F, -185°C to 400°C -
28007 – MP-50™
$108.54Moly Paste MP-50 PLUG TOP CAN is a non-melting, lubricating compound that contains a high percentage of low-friction molybdenum disulfide (MoS2). Being a thick paste, it can be applied by brush or spatula. MP-50 is water resistant, withstands extreme weather elements, and helps prevent corrosion on parts exposed to water, steam, most acids and alkalis. Ideal gears - spur and marine transmission. Benefits of using MP-50™ Non-melting 50% Saturated Molybdenum Disulfide (MoS²) Film strength of 300,00 psi High-Temp >750°F (400°C) Density 1117 Prevents corrosion Specifications: Base Materials: Organo Clay & MoS2 / Petroleum Service Rating: -300°F to 750°F, -185°C to 400°C TDS SDS -
28023 – MP-50™
$628.18Moly Paste MP-50 1 GAL. PAIL is a non-melting, lubricating compound that contains a high percentage of low-friction molybdenum disulfide (MoS2). Being a thick paste, it can be applied by brush or spatula. MP-50 is water resistant, withstands extreme weather elements, and helps prevent corrosion on parts exposed to water, steam, most acids and alkalis. Ideal gears - spur and marine transmission. Benefits of using MP-50™ Non-melting 50% Saturated Molybdenum Disulfide (MoS²) Film strength of 300,00 psi High-Temp >750°F (400°C) Density 1117 Prevents corrosion Specifications: Base Materials: Organo Clay & MoS2 / Petroleum Service Rating: -300°F to 750°F, -185°C to 400°C TDS SDS -
28516 – WLD™
$304.42Wire Rope & Chain Lubricant Paste w/ MoS2 WLD 5 GAL. PAIL is highly tenacious, adhesive lubricant containing both molybdenum disulphide (MoS2) and graphite. WLD is specially formulated for use on wire lines, cable and open roller chains. It penetrates the outer strands of wire rope and cable, displacing moisture, and permeating to the core of the rope or cable, lubricating and protecting each strand. Benefits of using WLD™ Penetrates Prevents rust & corrosion Replaces moisture Will not throw or run off Lubricates Does not attract dirt or dust Specifications: Base Materials: Organo Clay & Resins / Petroleum Oils Service Rating: 35°F to 350°F, 2°C to 175°C -
28519 – WLD™
$319.95Wire Rope & Chain Lubricant Paste w/ MoS2 WLD 35 LB. METAL PAIL is highly tenacious, adhesive lubricant containing both molybdenum disulphide (MoS2) and graphite. WLD is specially formulated for use on wire lines, cable and open roller chains. It penetrates the outer strands of wire rope and cable, displacing moisture, and permeating to the core of the rope or cable, lubricating and protecting each strand. Benefits of using WLD™ Penetrates Prevents rust & corrosion Replaces moisture Will not throw or run off Lubricates Does not attract dirt or dust Specifications: Base Materials: Organo Clay & Resins / Petroleum Oils Service Rating: 35°F to 350°F, 2°C to 175°C -
28524 – WLD™
$998.96Wire Rope & Chain Lubricant Paste w/ MoS2 WLD 15 GAL. DRUM is highly tenacious, adhesive lubricant containing both molybdenum disulphide (MoS2) and graphite. WLD is specially formulated for use on wire lines, cable and open roller chains. It penetrates the outer strands of wire rope and cable, displacing moisture, and permeating to the core of the rope or cable, lubricating and protecting each strand. Benefits of using WLD™ Penetrates Prevents rust & corrosion Replaces moisture Will not throw or run off Lubricates Does not attract dirt or dust Specifications: Base Materials: Organo Clay & Resins / Petroleum Oils Service Rating: 35°F to 350°F, 2°C to 175°C -
28529 – WLD™
$3,041.33Wire Rope & Chain Lubricant Paste w/ MoS2 WLD 50 GAL. DRUM is highly tenacious, adhesive lubricant containing both molybdenum disulphide (MoS2) and graphite. WLD is specially formulated for use on wire lines, cable and open roller chains. It penetrates the outer strands of wire rope and cable, displacing moisture, and permeating to the core of the rope or cable, lubricating and protecting each strand. Benefits of using WLD™ Penetrates Prevents rust & corrosion Replaces moisture Will not throw or run off Lubricates Does not attract dirt or dust Specifications: Base Materials: Organo Clay & Resins / Petroleum Oils Service Rating: 35°F to 350°F, 2°C to 175°C -
28541 – WLD™
$15.11Wire Rope & Chain Lubricant Paste w/ MoS2 WLD 12 OZ. AEROSOL is highly tenacious, adhesive lubricant containing both molybdenum disulphide (MoS2) and graphite. WLD is specially formulated for use on wire lines, cable and open roller chains. It penetrates the outer strands of wire rope and cable, displacing moisture, and permeating to the core of the rope or cable, lubricating and protecting each strand. Benefits of using WLD™ Penetrates Prevents rust & corrosion Replaces moisture Will not throw or run off Lubricates Does not attract dirt or dust Specifications: Base Materials: Organo Clay & Resins / Petroleum Oils Service Rating: 35°F to 350°F, 2°C to 175°C TDS (Aerosol) TDS SDS (Aerosol) SDS -
30029 – Jet-Lube EASY CLEAN LIQUID Alkaline Cleaner and Degreaser Concentrate 50 Gal Drum
$1,563.79Contains no acids, chlorides, phosphates or other toxic ingredients.ApplicationsCan be used for heavy duty parts degreasing, pressure washing, steam cleaning, ultrasound cleaning or simply by brushing or spraying and then rinsing with water or wiping clean. In its concentrated form, EASY-CLEAN LIQUID could be corrosive to aluminum and its alloys. -
30033 – Jet-Lube EASY CLEAN LIQUID Alkaline Cleaner and Degreaser Concentrate 1 Gal Jug
$140.16Contains no acids, chlorides, phosphates or other toxic ingredients.ApplicationsCan be used for heavy duty parts degreasing, pressure washing, steam cleaning, ultrasound cleaning or simply by brushing or spraying and then rinsing with water or wiping clean. In its concentrated form, EASY-CLEAN LIQUID could be corrosive to aluminum and its alloys. -
30035 – Jet-Lube EASY CLEAN LIQUID Alkaline Cleaner and Degreaser Concentrate 5 Gal Jug
$180.55Alkaline Cleaner & Degreaser EASY-CLEAN (LIQUID) alkaline-based cleaner/degreaser that uniquely combines cleaning agents with newly-developed emulsifying technology to provide a product that can effectively remove carbon, grease, oil, and other organic deposits while being both safe and ozone friendly. Benefits Biodegradable Non-combustible Non-flammable Non-fuming Non-toxic Water soluble Contains no 1:1:1 Trichloroethane, Fluorocarbons or SARA Title III, Section 313, Part 372 listed ingredients and contains no acids, chlorides, phosphates, or TTO’s (Total Toxic Organic Compounds) Specifications Base Materials: Alkaline-based