Jet-Lube
Showing 91–135 of 543 results
-
15555 – 550®
$12.41Nonmetallic Anti-Seize & Thread Lubricant A premium formulation for a wide variety of applications over a wide temperature range. 550 is well-suited for most maintenance needs. Its composition offers reliable protection against seizure and heat-freeze, eases assembling and dismantling and reduces man hours. 550 assures protection against rust, oxidation and corrosion, it will not harden, evaporate, or settle out, and requires no thinning. Benefits of using 550® Sulfur, lead & copper-free Water-resistant Rust & corrosion inhibitors Controlled frictional characteristics Specifications: Base Materials: Complex / Petroleum Friction / K-Factor: 0.17 Certifications: MIL-PRF-907F Service Rating: -65°F to 2400°F, -54°C to 1316°C View all -
15629 – EXTREME® CONCENTRATE
$3,345.5315629 - EXTREME® CONCENTRATE -
15713 – Jet-Lube RISER BOLT LUBE QT 2.5 Gal Pail
$108.14POWER-KOTE exceeds industry performance and environmental standards and is highly recommended for large-diameter drill collars in the most extreme drilling conditions, including geothermal wells, high angle holes, extended reach, sidetrack reentry, and horizontal drilling applications. A non-metallic, environmentally acceptable drill collar and tool joint compound. Prevents excessive circumferential make-up and assures shoulder faces mate completely without stand-off or deformation.ApplicationsFor extreme-service where high speed and penetration rates are present, deviated holes or directional drilling is incurred. Ideally suited for drilling jobs where high pH muds are used as well.Not recommended for oxygen service. -
15715 – Jet-Lube RISER BOLT LUBE QT 5 Gal Pail
$201.17POWER-KOTE exceeds industry performance and environmental standards and is highly recommended for large-diameter drill collars in the most extreme drilling conditions, including geothermal wells, high angle holes, extended reach, sidetrack reentry, and horizontal drilling applications. A non-metallic, environmentally acceptable drill collar and tool joint compound. Prevents excessive circumferential make-up and assures shoulder faces mate completely without stand-off or deformation.ApplicationsFor extreme-service where high speed and penetration rates are present, deviated holes or directional drilling is incurred. Ideally suited for drilling jobs where high pH muds are used as well.Not recommended for oxygen service. -
15723 – Jet-Lube RISER BOLT LUBE QT 1 Gal Pail
$49.92POWER-KOTE exceeds industry performance and environmental standards and is highly recommended for large-diameter drill collars in the most extreme drilling conditions, including geothermal wells, high angle holes, extended reach, sidetrack reentry, and horizontal drilling applications. A non-metallic, environmentally acceptable drill collar and tool joint compound. Prevents excessive circumferential make-up and assures shoulder faces mate completely without stand-off or deformation.ApplicationsFor extreme-service where high speed and penetration rates are present, deviated holes or directional drilling is incurred. Ideally suited for drilling jobs where high pH muds are used as well.Not recommended for oxygen service. -
16023 – MOLY-MIST™
$385.20Dry Film Lubricant w/MoS2 Consists of a high percentage of micro-fine MoS2 suspended in a unique liquid, quick-drying vehicle. MOLY-MIST bonds dry-form MoS2 powder to surfaces without heating or baking. It prevents galling and reduces torque. When sprayed on any surface it 'touches dry' quickly and cures to an even, tenacious coating in a matter of 30 minutes. Benefits of using Moly-Mist™ Dry film coating Cone spray pattern Quick activation Water displacing Ideal as a break in lubricant Non-flammable No silicone Strong surface tension Specifications: Base Materials: Solvent -Aromatic/Ketone / Resin - Alkyd Service Rating: -300°F to 750°F, -184°C to 399°C -
16402 – WHITE KNIGHT™
$17.67Food Grade Anti-Seize & Thread Lubricant - NSF H1 WHITE KNIGHT 1/2 LB. BRUSHTOP CAN is a premium quality anti-seize compound developed specifically for use in applications where incidental food contact is possible. WHITE KNIGHT aluminum complex based anti-seize is composed entirely of ingredients that meet NSF/FDA requirements. This product provides a degree of safety and protection unsurpassed by any other product. Ideal for chain drives. Ideal fittings - pipe and stainless steel. Ideal gears - worm. Benefits of using White Knight™ Retains the equipment in serviceable condition Environmentally preferred Ideal for incident food contact applications Controlled frictional characteristics so that the surfaces of the nut & bolt are torque to the designed K-Factor Assures full hydraulic efficiency Contains Propylparaben (bacterial fungi static agent) Specifications: Friction / K-Factor: 0.15 Certifications: MIL-PRF-907F, NSF H1 Registered #048235 (Bulk), 048235 (Aerosol), FDA Regulation CFR21, Part 178.3570 Service Rating: -65°F to 1800°F, -54°C to 982°C -
16404 – WHITE KNIGHT™
$24.08Food Grade Anti-Seize & Thread Lubricant - NSF H1 A premium quality anti-seize compound developed specifically for use in applications where incidental food contact is possible. WHITE KNIGHT aluminum complex based anti-seize is composed entirely of ingredients that meet NSF/FDA requirements. This product provides a degree of safety and protection unsurpassed by any other product. Ideal for chain drives. Ideal fittings - pipe and stainless steel. Ideal gears - worm. Benefits of using White Knight™ Retains the equipment in serviceable condition Environmentally preferred Ideal for incident food contact applications Controlled frictional characteristics so that the surfaces of the nut & bolt are torque to the designed K-Factor Assures full hydraulic efficiency Contains Propylparaben (bacterial fungi static agent) Specifications: Friction / K-Factor: 0.15 Certifications: MIL-PRF-907F, NSF H1 Registered #048235 (Bulk), 048235 (Aerosol), FDA Regulation CFR21, Part 178.3570 Service Rating: -65°F to 1800°F, -54°C to 982°C TDS SDS SDS (Aerosol) -
16415 – WHITE KNIGHT™
$383.45Food Grade Anti-Seize & Thread Lubricant - NSF H1 WHITE KNIGHT 5 GAL.PAIL is a premium quality anti-seize compound developed specifically for use in applications where incidental food contact is possible. WHITE KNIGHT aluminum complex based anti-seize is composed entirely of ingredients that meet NSF/FDA requirements. This product provides a degree of safety and protection unsurpassed by any other product. Ideal for chain drives. Ideal fittings - pipe and stainless steel. Ideal gears - worm. Benefits of using White Knight™ Retains the equipment in serviceable condition Environmentally preferred Ideal for incident food contact applications Controlled frictional characteristics so that the surfaces of the nut & bolt are torque to the designed K-Factor Assures full hydraulic efficiency Contains Propylparaben (bacterial fungi static agent) Specifications: Friction / K-Factor: 0.15 Certifications: MIL-PRF-907F, NSF H1 Registered #048235 (Bulk), 048235 (Aerosol), FDA Regulation CFR21, Part 178.3570 Service Rating: -65°F to 1800°F, -54°C to 982°C TDS SDS SDS (Aerosol) -
16429 – WHITE KNIGHT™
$2,439.13Food Grade Anti-Seize & Thread Lubricant - NSF H1 WHITE KNIGHT 50 GAL. DRUM is a premium quality anti-seize compound developed specifically for use in applications where incidental food contact is possible. WHITE KNIGHT aluminum complex based anti-seize is composed entirely of ingredients that meet NSF/FDA requirements. This product provides a degree of safety and protection unsurpassed by any other product. Ideal for chain drives. Ideal fittings - pipe and stainless steel. Ideal gears - worm. Benefits of using White Knight™ Retains the equipment in serviceable condition Environmentally preferred Ideal for incident food contact applications Controlled frictional characteristics so that the surfaces of the nut & bolt are torque to the designed K-Factor Assures full hydraulic efficiency Contains Propylparaben (bacterial fungi static agent) Specifications: Friction / K-Factor: 0.15 Certifications: MIL-PRF-907F, NSF H1 Registered #048235 (Bulk), 048235 (Aerosol), FDA Regulation CFR21, Part 178.3570 Service Rating: -65°F to 1800°F, -54°C to 982°C -
17112 – RUN-N-SEAL® ARCTIC
$148.58Metal-Free Thread Sealant JET-LUBE RUN-N-SEAL® ARCTIC is a patented metal-free, high-pressure sealant alternative for API-MODIFIED. RUN-N-SEAL ARCTIC contains graphite and other non-metallic, inorganic, anti-wear additives blended into a low temperature capable base grease for easier application base grease. It contains a large volume of solids enhanced by a higher concentration of large-sized particles. The improved distribution of particle sizes and volume of solids provides an excellent seal in large and small diameter, non-shouldered threads. The anhydrous calcium grease also has excellent inherent water resistance. Ideal tubing connections - 8-round and non-shouldered. Benefits of using RUN-N-SEAL® ARCTIC Sticks to wet and oil steel Contains additives for protection against rust, corrosion and oxidation Prevents leakage (seals to 10,000 psi) High film strength to protect against wear, galling, and seizure H₂S Inhibited Specifications of 17112 - RUN-N-SEAL® ARCTIC Base Materials: Anhydrous Calcium / Petroleum Friction / K-Factor: 0.9 (Relative to API-MODIFIED) Certifications: Exceeds all of the performance criteria described in API spec. 5CT, Tested in conformance with API RP 5A3 TDS SDS -
17129 – RUN-N-SEAL® ARCTIC
$3,033.33Metal-Free Thread Sealant JET-LUBE RUN-N-SEAL® ARCTIC is a patented metal-free, high-pressure sealant alternative for API-MODIFIED. RUN-N-SEAL ARCTIC contains graphite and other non-metallic, inorganic, anti-wear additives blended into a low temperature capable base grease for easier application base grease. It contains a large volume of solids enhanced by a higher concentration of large-sized particles. The improved distribution of particle sizes and volume of solids provides an excellent seal in large and small diameter, non-shouldered threads. The anhydrous calcium grease also has excellent inherent water resistance. Ideal tubing connections - 8-round and non-shouldered. Benefits of using RUN-N-SEAL® ARCTIC Sticks to wet and oil steel Contains additives for protection against rust, corrosion and oxidation Prevents leakage (seals to 10,000 psi) High film strength to protect against wear, galling, and seizure H₂S Inhibited Specifications of 17129 - RUN-N-SEAL® ARCTIC Base Materials: Anhydrous Calcium / Petroleum Friction / K-Factor: 0.9 (Relative to API-MODIFIED) Certifications: Exceeds all of the performance criteria described in API spec. 5CT, Tested in conformance with API RP 5A3 TDS SDS -
17909 – GEAR GUARD™
$103.10Open Gear Lubricant Paste w/ MoS2 (Black) GEAR GUARD 9 LB. 1 GAL. PAIL is a paste-like, viscous lubricant for reducing friction and wear. GEAR GUARD™ is a heavy-duty compound, specially prepared to penetrate pores of metal, with exceptional “stay-put” characteristics. It provides maximum lubrication and shock-load protection, reduces gear noise, lubricates, prevents scoring, spalling or welding of the gear teeth; assuring a smooth, long-lasting, economical and effective coating. Its black color guides proper coverage, allowing easy touch up. GEAR GUARD resists heat and pressure, will not wash or wear off because of weather, and will not break down after repeated working. Ideal chains - drives. Ideal gears - roller. Benefits of using Gear-Guard™ No VOC's or ozone depleting solvents No dropping point Friction reducing wear additive Shock-load protection Will not sling off the surface Flows easily "Stay-Put" characteristics Contains Moly Pumpable Rust-preventing additives Moisture-resistant Resists heat & pressure Specifications: Base Materials: Petroleum Oils Service Rating: 35°F to 350°F, 2°C to 175°C, (Aerosol) -25°F (-32°C) to 350°F (175°C) TDS (Aerosol) TDS SDS SDS (Aerosol) -
17916 – GEAR GUARD™
$334.15Open Gear Lubricant Paste w/ MoS2 (Black) GEAR GUARD 35 LB. 5 GAL. PAIL is a paste-like, viscous lubricant for reducing friction and wear. GEAR GUARD™ is a heavy-duty compound, specially prepared to penetrate pores of metal, with exceptional “stay-put” characteristics. It provides maximum lubrication and shock-load protection, reduces gear noise, lubricates, prevents scoring, spalling or welding of the gear teeth; assuring a smooth, long-lasting, economical and effective coating. Its black color guides proper coverage, allowing easy touch up. GEAR GUARD resists heat and pressure, will not wash or wear off because of weather, and will not break down after repeated working. Ideal chains - drives. Ideal gears - roller. Benefits of using Gear-Guard™ No VOC's or ozone depleting solvents No dropping point Friction reducing wear additive Shock-load protection Will not sling off the surface Flows easily "Stay-Put" characteristics Contains Moly Pumpable Rust-preventing additives Moisture-resistant Resists heat & pressure Specifications: Base Materials: Petroleum Oils Service Rating: 35°F to 350°F, 2°C to 175°C, (Aerosol) -25°F (-32°C) to 350°F (175°C) TDS (Aerosol) TDS SDS SDS (Aerosol) -
17929 – GEAR GUARD™
$619.11Open Gear Lubricant Paste w/ MoS2 (Black) GEAR GUARD 400 LB. DRUM is a paste-like, viscous lubricant for reducing friction and wear. GEAR GUARD™ is a heavy-duty compound, specially prepared to penetrate pores of metal, with exceptional “stay-put” characteristics. It provides maximum lubrication and shock-load protection, reduces gear noise, lubricates, prevents scoring, spalling or welding of the gear teeth; assuring a smooth, long-lasting, economical and effective coating. Its black color guides proper coverage, allowing easy touch up. GEAR GUARD resists heat and pressure, will not wash or wear off because of weather, and will not break down after repeated working. Ideal chains - drives. Ideal gears - roller. Benefits of using Gear-Guard™ No VOC's or ozone depleting solvents No dropping point Friction reducing wear additive Shock-load protection Will not sling off the surface Flows easily "Stay-Put" characteristics Contains Moly Pumpable Rust-preventing additives Moisture-resistant Resists heat & pressure Specifications: Base Materials: Petroleum Oils Service Rating: 35°F to 350°F, 2°C to 175°C, (Aerosol) -25°F (-32°C) to 350°F (175°C) -
17941 – GEAR GUARD™
$16.62Open Gear Lubricant w/ Moly and Graphite GEAR GUARD 12 OZ. AEROSOL is a paste-like, viscous lubricant for reducing friction and wear. GEAR GUARD™ is a heavy-duty compound, specially prepared to penetrate pores of metal, with exceptional “stay-put” characteristics. It provides maximum lubrication and shock-load protection, reduces gear noise, lubricates, prevents scoring, spalling or welding of the gear teeth; assuring a smooth, long-lasting, economical and effective coating. Its black color guides proper coverage, allowing easy touch up. GEAR GUARD resists heat and pressure, will not wash or wear off because of weather, and will not break down after repeated working. Ideal chains - drives. Ideal gears - roller. Benefits No VOC's or ozone depleting solvents No dropping point Friction reducing wear additive Shock-load protection Will not sling off the surface Flows easily "Stay-Put" characteristics Contains Moly Pumpable Rust-preventing additives Moisture-resistant Resists heat & pressure Specifications: Base Materials: Petroleum Oils Service Rating: 35°F to 350°F, 2°C to 175°C, (Aerosol) -25°F (-32°C) to 350°F (175°C) TDS (Aerosol) TDS SDS SDS (Aerosol) -
18412 – ENVIRO-GUARD™
$158.70Drop Pipe Lubricant & Sealant Specially formulated to aid in the assembly/disassembly of downhole casing for water wells. ENVIRO-GUARDs unique base grease is highly water-resistant and contains inhibitors that allow it to withstand and provide protection against the corrosive effects of caustic environments, thereby extending the life of well casing connections. High film strength protects against galling and a high solids content accommodates thread seal design requirements. Benefits of using Enviro-Guard™ Biodegradable Non-toxic High film strength Metal-free High solids content Sticks to wet or oily threads Specifications: Base Materials: Complex Thickeners / Synthetic & Vegetable Oils Certifications: Conforms to assembly bill 1953, Eco-Certified Service Rating: -20°F to 500°F, -29°C to 260°C -
18423 – ENVIRO-GUARD™
$80.34Drop Pipe Lubricant & Sealant Specially formulated to aid in the assembly/disassembly of downhole casing for water wells. ENVIRO-GUARDs unique base grease is highly water-resistant and contains inhibitors that allow it to withstand and provide protection against the corrosive effects of caustic environments, thereby extending the life of well casing connections. High film strength protects against galling and a high solids content accommodates thread seal design requirements. Benefits of using Enviro-Guard™ Biodegradable Non-toxic High film strength Metal-free High solids content Sticks to wet or oily threads Specifications: Base Materials: Complex Thickeners / Synthetic & Vegetable Oils Certifications: Conforms to assembly bill 1953, Eco-Certified Service Rating: -20°F to 500°F, -29°C to 260°C -
18515 – WELL-GUARD®
$1,281.50Monitor Well-Drilling Thread Compound WELL-GUARD® is a high performance thread compound specifically designed for critical monitor well and other environmentally sensitive drilling applications requiring the use of a petroleum hydrocarbon-free product. WELL-GUARD is formulated from a synergistic blend of synthetic fluids and non-metallic, inorganic, EP and anti-wear additives It provides maximum protection against galling, seizing and damage to threads while maintaining monitor well integrity. Benefits of using Well-Guard® Petroleum hydrocarbon-free Biodegradable Hydrocarbon & corrosion resistant Non-toxic Chemically stable Pumpable No VOC's Specifications: Base Materials: Clay & Silica / Synthetic Diester Certifications: NSF-ANSI 61, Conforms to assembly bill 1953, Eco-Certified Service Rating: -10°F to 400°F, -23°C to 204°C -
18523 – WELL-GUARD®
$306.52Monitor Well-Drilling Thread Compound WELL-GUARD® is a high performance thread compound specifically designed for critical monitor well and other environmentally sensitive drilling applications requiring the use of a petroleum hydrocarbon-free product. WELL-GUARD is formulated from a synergistic blend of synthetic fluids and non-metallic, inorganic, EP and anti-wear additives It provides maximum protection against galling, seizing and damage to threads while maintaining monitor well integrity. Benefits of using Well-Guard® Petroleum hydrocarbon-free Biodegradable Hydrocarbon & corrosion resistant Non-toxic Chemically stable Pumpable No VOC's Specifications: Base Materials: Clay & Silica / Synthetic Diester Certifications: NSF-ANSI 61, Conforms to assembly bill 1953, Eco-Certified Service Rating: -10°F to 400°F, -23°C to 204°C -
18572 – JET-LUBE WELL-GUARD 1 pint jar
$0.93Monitor Well-Drilling Thread Compound JET-LUBE WELL-GUARD® is a high performance thread compound specifically designed for critical monitor well and other environmentally sensitive drilling applications requiring the use of a petroleum hydrocarbon-free product. WELL-GUARD is formulated from a synergistic blend of synthetic fluids and non-metallic, inorganic, EP and anti-wear additives It provides maximum protection against galling, seizing and damage to threads while maintaining monitor well integrity. Benefits of using Well-Guard® Petroleum hydrocarbon-free Biodegradable Hydrocarbon & corrosion resistant Non-toxic Chemically stable Pumpable No VOC's Specifications of 18572 JET-LUBE WELL-GUARD 1 pint jar Base Materials: Clay & Silica / Synthetic Diester Certifications: NSF-ANSI 61, Conforms to assembly bill 1953, Eco-Certified Service Rating: -10°F to 400°F, -23°C to 204°C TDS SDS -
18929 – RUN-N-SEAL® EXTREME® CONC
$3,279.22Metal-Free Thread Sealant Jet-Lube RUN-N-SEAL® EXTREME® CONC is a patented metal-free, high-pressure sealant alternative for API MODIFIED. RUN-N-SEAL EXTREME contains graphite and other non-metallic, inorganic, anti-wear additives blended with KORR-GUARD, a high-temperature, rust-inhibiting complex soap based grease used for storage applications for nearly 2 decades. RUN-N-SEAL EXTREME contains a large volume of solids enhanced by a higher concentration of large-sized particles. The improved distribution of particle sizes and volume of solids provides an excellent seal in large and small diameter, non-shouldered threads. The complex soap grease provides a high melting point, ensures brushability over a wide range of temperatures and has excellent inherent water resistance. Ideal tubing connections - 8-round and non-shouldered. Benefits of using Run-N-Seal® Extreme Enhanced rust inhibiting properties Contains additives for protection against rust, corrosion & oxidation Prevents leakage (seals to 10,000 psi) High film strength H₂S Inhibited Sticks to wet & oily steel, ensuring the compound will not wash off threads Specifications of 18929 RUN-N-SEAL® EXTREME® CONC Base Materials: Complex Soap / Petroleum Friction / K-Factor: 0.9 (Relative to API-MODIFIED) Certifications: Exceeds all of the performance criteria described in API spec. 5CT, Tested in conformance with API RP 5A3 TDS SDS -
20493 – Z-50™
$464.86Drill Collar & Tool Joint Compound Jet-Lube Z-50™ contains prime grade zinc and formulated with 50% metallic zinc, meeting the metallic zinc requirements described in API Bulletin 5A2. Z-50 contains special additives to reduce the plating and buildup of metallic zinc encountered with other zinc compounds. Benefits of using Z-50™ Non-plating Low sulfur content Non-reactive Brushable over a wide temperature range Consistent rig floor makeup Resistant to further downhole makeup Sticks to wet joints Non-reactive Specifications of 20493 Z-50™ Base Materials: Aluminum Complex / Petroleum Friction / K-Factor: 1 Service Rating: 0°F to 300°F, -18°C to 150°C TDS SDS -
20794 – Z-60™
$294.34Drill Collar & Tool Joint Compound JET-LUBE Z-60 contains prime grade zinc and formulated with 60% metallic zinc, meeting the metallic zinc requirements described in API Bulletin 5A2. Z-60™ contains special additives to reduce the plating and buildup of metallic zinc encountered with other zinc compounds. Benefits of using Z-60™ Non-plating Low sulfur content Non-reactive Brushable over a wide temperature range Consistent rig floor makeup Resistant to further downhole makeup Sticks to wet joints Non-reactive Specifications of 20794 Z-60™ Base Materials: Aluminum Complex / Petroleum Friction / K-Factor: 1 Service Rating: 0°F to 300°F, -18°C to 150°C TDS SDS -
20929 – SEAL-GUARD™ ECF™
$5,128.46Premium Thread Compound JET-LUBE SEAL-GUARD™ ECF™ is specifically formulated to meet the performance requirements of proprietary, metal-to-metal seal, and high interference connection designs utilizing high performance materials including super chrome and high alloy steels. The smaller particle size distribution may not provide optimum seal performance on 8-round and buttress thread forms. SEAL-GUARD ECF has an advance base containing a carefully selected balance of synthetic and vegetable oils with Jet-Lube extreme base grease thickener technology coupled with innovative solid lubricants. The result is superior lubrication under high loads with galling resistance equivalent to heavy metal based compounds in a totally metal-free formulation. This patented technology provides a high affinity to metal surfaces with a low added solids content. Ideal tubing connections - premium. Benefits of using Seal-Guard™ ECF™ Superior lubrication under high loads with galling resistance Patented, cutting-edge technology High affinity to metal surfaces Film that gives consistent frictional performance Biodegradable Metal-free Sticks to wet or oily threads Specifications of 20929 SEAL-GUARD™ ECF™ Base Materials: Complex / Synthetic & Vegetable Oils Friction / K-Factor: 1.0 to 1.2 (Relative to API MODIFIED) Certifications: Ospar Commission – Harmonized Offshore Chemical Notification Format (HOCNF) CLASSIFICATION: “Yellow” rating for Norway CLASSIFICATION: “E” for The United Kingdom and The Netherlands Denmark PR#: 2351246 Eco-Certified Service Rating: -20°F to 450°F, -29°C to 232°C TDS SDS -
22112M – API-MODIFIED
$183.04High Pressure Thread Compound JET-LUBE API-MODIFIED is a high-pressure thread compound that conforms to or exceeds the requirements of API RP5A3 (former API BUL 5A2) and ISO 13678 Annex A. API-Modified contains rust and oxidation inhibitors blended with Jet-Lubes base grease compounded from custom-refined, low-sulfur oil to ensure brushability over a wide temperature range. It tenaciously adheres to all surfaces, resists water washout, and prevents rust and corrosion. API-Modified reduces friction in the makeup of casing and tubing, preventing galling and wear. Maximum thread engagement is ensured, providing optimum leak resistance. API-Modified contains inhibitors that provide maximum protection against rust and corrosion of threaded surfaces. Its conductivity reduces the possibility of electrolytic corrosion by preventing the formation of galvanic cells in the presence of salt water and other corrosive fluids. Tubing connections ideal - buttress. Benefits of using API-Modified™ Rust & oxidation inhibitors Brushable over a wide temperature range Tenacious adherence to all surfaces Withstands pressures up to 10,000 psi Will not harden or dry Specifications of 22112M API-MODIFIED Base Materials: Lithium / Petroleum Friction / K-Factor: Friction Factor (API RP 5A) 1.0 K-Factor, Nut Factor (API 6A) 0.13 Certifications: API RP 5A3/ISO 13678 TDS SDS -
22117 – API MODIFIED
$358.99High Pressure Thread Compound JET-LUBE API MODIFIED is a high-pressure thread compound that conforms to or exceeds the requirements of API RP5A3 (former API BUL 5A2) and ISO 13678 Annex A. API-Modified contains rust and oxidation inhibitors blended with Jet-Lubes base grease compounded from custom-refined, low-sulfur oil to ensure brushability over a wide temperature range. It tenaciously adheres to all surfaces, resists water washout, and prevents rust and corrosion. API-Modified reduces friction in the makeup of casing and tubing, preventing galling and wear. Maximum thread engagement is ensured, providing optimum leak resistance. API-Modified contains inhibitors that provide maximum protection against rust and corrosion of threaded surfaces. Its conductivity reduces the possibility of electrolytic corrosion by preventing the formation of galvanic cells in the presence of salt water and other corrosive fluids. Tubing connections ideal - buttress. Benefits of using API-Modified™ Rust & oxidation inhibitors Brushable over a wide temperature range Tenacious adherence to all surfaces Withstands pressures up to 10,000 psi Will not harden or dry Specifications of 22117 API MODIFIED Base Materials: Lithium / Petroleum Friction / K-Factor: Friction Factor (API RP 5A) 1.0 K-Factor, Nut Factor (API 6A) 0.13 Certifications: API RP 5A3/ISO 13678 TDS SDS -
22119 – API-MODIFIED
$387.55High Pressure Thread Compound JET-LUBE API MODIFIED is a high-pressure thread compound that conforms to or exceeds the requirements of API RP5A3 (former API BUL 5A2) and ISO 13678 Annex A. API-Modified contains rust and oxidation inhibitors blended with Jet-Lubes base grease compounded from custom-refined, low-sulfur oil to ensure brushability over a wide temperature range. It tenaciously adheres to all surfaces, resists water washout, and prevents rust and corrosion. API-Modified reduces friction in the makeup of casing and tubing, preventing galling and wear. Maximum thread engagement is ensured, providing optimum leak resistance. API-Modified contains inhibitors that provide maximum protection against rust and corrosion of threaded surfaces. Its conductivity reduces the possibility of electrolytic corrosion by preventing the formation of galvanic cells in the presence of salt water and other corrosive fluids. Tubing connections ideal - buttress. Benefits of using API-Modified™ Rust & oxidation inhibitors Brushable over a wide temperature range Tenacious adherence to all surfaces Withstands pressures up to 10,000 psi Will not harden or dry Specifications of 22117 API MODIFIED Base Materials: Lithium / Petroleum Friction / K-Factor: Friction Factor (API RP 5A) 1.0 K-Factor, Nut Factor (API 6A) 0.13 Certifications: API RP 5A3/ISO 13678 TDS SDS -
22129 – API-MODIFIED
$4,083.46High Pressure Thread Compound JET-LUBE API MODIFIED is a high-pressure thread compound that conforms to or exceeds the requirements of API RP5A3 (former API BUL 5A2) and ISO 13678 Annex A. API-Modified contains rust and oxidation inhibitors blended with Jet-Lubes base grease compounded from custom-refined, low-sulfur oil to ensure brushability over a wide temperature range. It tenaciously adheres to all surfaces, resists water washout, and prevents rust and corrosion. API-Modified reduces friction in the makeup of casing and tubing, preventing galling and wear. Maximum thread engagement is ensured, providing optimum leak resistance. API-Modified contains inhibitors that provide maximum protection against rust and corrosion of threaded surfaces. Its conductivity reduces the possibility of electrolytic corrosion by preventing the formation of galvanic cells in the presence of salt water and other corrosive fluids. Tubing connections ideal - buttress. Benefits of using API-Modified™ Rust & oxidation inhibitors Brushable over a wide temperature range Tenacious adherence to all surfaces Withstands pressures up to 10,000 psi Will not harden or dry Specifications of 22129 API MODIFIED Base Materials: Lithium / Petroleum Friction / K-Factor: Friction Factor (API RP 5A) 1.0 K-Factor, Nut Factor (API 6A) 0.13 Certifications: API RP 5A3/ISO 13678 TDS SDS -
22315 – RUN-N-SEAL® EXTREME® ALL WEATHER
$347.04JET-LUBE 22315 - RUN-N-SEAL® EXTREME® ALL WEATHER contains a large volume of solids enhanced by a higher concentration of large-sized particles. The improved distribution of particle sizes and volume of solids provides an excellent seal in large and small diameter, non-shouldered threads. The complex soap grease provides a high melting point, ensures brushability over a wide range of temperatures and has excellent inherent water resistance. It sticks to wet and oily steel, ensuring the compound will not wash off threads. -
22329 – RUN-N-SEAL® EXTREME® ALL WEATHER
$1,939.14JET-LUBE 22329 - RUN-N-SEAL® EXTREME® ALL WEATHER contains a large volume of solids enhanced by a higher concentration of large-sized particles. The improved distribution of particle sizes and volume of solids provides an excellent seal in large and small diameter, non-shouldered threads. The complex soap grease provides a high melting point, ensures brushability over a wide range of temperatures and has excellent inherent water resistance. It sticks to wet and oily steel, ensuring the compound will not wash off threads. -
23012 – TF-15®
$187.15Metal-Free Thread Sealing Compound Jet-Lube TF-15® is a high-pressure sealant containing PTFE, graphite and rust, corrosion, and oxidation inhibitors. All are blended in JET-LUBE's complex grease manufactured using highly refined, low-sulfur oil to ensure brushability over a wide temperature range, tenacious adherence to all surfaces, resistance to water washout, and prevention of rust/corrosion. TF-15 is highly recommended for use on fiberglass casing and tubing on cut threads. Formed threads can have tighter clearances and require the use of TF-15 Arctic. It assures tight makeup at low torque and allows easy breakout without seizing, stripping, or galling. It provides a permanent seal and maintains joint efficiency under vibration, pressure, surge, and temperature fluctuations. It is particularly useful in areas subject to H2S*, salt water, a wide variety of oils, solvents, gases (except oxygen), acids, alkalis and steam. Ideal tubing connections - threaded. Benefits of using TF-15® * H₂S Inhibited Non-metallic Non-volatile Solvent-free Lubricates for tighter makeup with less torque Seals at temperatures to 600°F Seals at pressures to 10,000 psi Seals badly worn threads as tight as new Seals applications exposed to H₂S and salt water Specifications of 23012 TF-15® Base Materials: Complex / Petroleum Friction / K-Factor: 0.7 (Relative to API-MODIFIED) Service Rating: -50°F to 600°F, -46°C to 315°C TDS SDS -
23015 – TF-15®
$480.61Metal-Free Thread Sealing Compound Jet-Lube TF-15® is a high-pressure sealant containing PTFE, graphite and rust, corrosion, and oxidation inhibitors. All are blended in JET-LUBE's complex grease manufactured using highly refined, low-sulfur oil to ensure brushability over a wide temperature range, tenacious adherence to all surfaces, resistance to water washout, and prevention of rust/corrosion. TF-15 is highly recommended for use on fiberglass casing and tubing on cut threads. Formed threads can have tighter clearances and require the use of TF-15 Arctic. It assures tight makeup at low torque and allows easy breakout without seizing, stripping, or galling. It provides a permanent seal and maintains joint efficiency under vibration, pressure, surge, and temperature fluctuations. It is particularly useful in areas subject to H2S*, salt water, a wide variety of oils, solvents, gases (except oxygen), acids, alkalis and steam. Ideal tubing connections - threaded. Benefits of using TF-15® * H₂S Inhibited Non-metallic Non-volatile Solvent-free Lubricates for tighter makeup with less torque Seals at temperatures to 600°F Seals at pressures to 10,000 psi Seals badly worn threads as tight as new Seals applications exposed to H₂S and salt water Specifications of 23015 TF-15® Base Materials: Complex / Petroleum Friction / K-Factor: 0.7 (Relative to API-MODIFIED) Service Rating: -50°F to 600°F, -46°C to 315°C TDS SDS -
23024 – JET-LUBE TF-15 15 gal. drum
$0.93Metal-Free Thread Sealing Compound Jet-Lube TF-15® 15 gal. drum is a high-pressure sealant containing PTFE, graphite and rust, corrosion, and oxidation inhibitors. All are blended in JET-LUBE's complex grease manufactured using highly refined, low-sulfur oil to ensure brushability over a wide temperature range, tenacious adherence to all surfaces, resistance to water washout, and prevention of rust/corrosion. TF-15 is highly recommended for use on fiberglass casing and tubing on cut threads. Formed threads can have tighter clearances and require the use of TF-15 Arctic. It assures tight makeup at low torque and allows easy breakout without seizing, stripping, or galling. It provides a permanent seal and maintains joint efficiency under vibration, pressure, surge, and temperature fluctuations. It is particularly useful in areas subject to H2S*, salt water, a wide variety of oils, solvents, gases (except oxygen), acids, alkalis and steam. Ideal tubing connections - threaded. Benefits of using TF-15® * H₂S Inhibited Non-metallic Non-volatile Solvent-free Lubricates for tighter makeup with less torque Seals at temperatures to 600°F Seals at pressures to 10,000 psi Seals badly worn threads as tight as new Seals applications exposed to H₂S and salt water Specifications of 23024 - JET-LUBE TF-15 Base Materials: Complex / Petroleum Friction / K-Factor: 0.7 (Relative to API-MODIFIED) Service Rating: -50°F to 600°F, -46°C to 315°C TDS SDS -
23029 – TF-15®
$6,331.22Metal-Free Thread Sealing Compound TF-15® 50 GAL. DRUM is a high-pressure sealant containing PTFE, graphite and rust, corrosion, and oxidation inhibitors. All are blended in JET-LUBE's complex grease manufactured using highly refined, low-sulfur oil to ensure brushability over a wide temperature range, tenacious adherence to all surfaces, resistance to water washout, and prevention of rust/corrosion. TF-15 is highly recommended for use on fiberglass casing and tubing on cut threads. Formed threads can have tighter clearances and require the use of TF-15 Arctic. It assures tight makeup at low torque and allows easy breakout without seizing, stripping, or galling. It provides a permanent seal and maintains joint efficiency under vibration, pressure, surge, and temperature fluctuations. It is particularly useful in areas subject to H2S*, salt water, a wide variety of oils, solvents, gases (except oxygen), acids, alkalis and steam. Ideal tubing connections - threaded. Benefits of using TF-15® * H₂S Inhibited Non-metallic Non-volatile Solvent-free Lubricates for tighter makeup with less torque Seals at temperatures to 600°F Seals at pressures to 10,000 psi Seals badly worn threads as tight as new Seals applications exposed to H₂S and salt water Specifications: Base Materials: Complex / Petroleum Friction / K-Factor: 0.7 (Relative to API-MODIFIED) Service Rating: -50°F to 600°F, -46°C to 315°C -
23502 – TF-25™
$20.66Metal-Free Thread Sealing Compound JET-LUBE TF-25 1/2 LB. BRUSHTOP CAN contains, in part, reprocessed PTFE and graphite in a high-melting, high temperature grease vehicle. It is further fortified with rust, corrosion, and oxidation inhibitors. TF-25's lubricating and sealing properties will prevent thread leaks of fluids, gases, or steam. It can be used for a multitude of low friction, anti-seize applications requiring maximum performance. It protects all threads from premature wear and prolongs the life of tapered-thread joints under all conditions. Ideal for press fittings. Benefits of using TF-25™ Non-hardening Contains no metallic additives Will not run, drip, or settle out Chemically inert Brushable Versatile and dependable May be used on both ferrous and Non-ferrous metals Lubricants and seals Specifications: Base Materials: Aluminum Complex / Petroleum Service Rating: -100°F to 600°F, -73°C to 316°C TDS -
23507 – JET-LUBE TF-25 2 lb plug top
$0.93Metal-Free Thread Sealing Compound JET-LUBE TF-25 contains, in part, reprocessed PTFE and graphite in a high-melting, high temperature grease vehicle. It is further fortified with rust, corrosion, and oxidation inhibitors. TF-25's lubricating and sealing properties will prevent thread leaks of fluids, gases, or steam. It can be used for a multitude of low friction, anti-seize applications requiring maximum performance. It protects all threads from premature wear and prolongs the life of tapered-thread joints under all conditions. Ideal for press fittings. Benefits of using TF-25™ Non-hardening Contains no metallic additives Will not run, drip, or settle out Chemically inert Brushable Versatile and dependable May be used on both ferrous and Non-ferrous metals Lubricants and seals Specifications of 23507 JET-LUBE TF-25 2 lb plug top Base Materials: Aluminum Complex / Petroleum Service Rating: -100°F to 600°F, -73°C to 316°C TDS -
23513 – JET-LUBE TF-25 2 1/2 gal pail
$0.93Metal-Free Thread Sealing Compound JET-LUBE TF-25 contains, in part, reprocessed PTFE and graphite in a high-melting, high temperature grease vehicle. It is further fortified with rust, corrosion, and oxidation inhibitors. TF-25's lubricating and sealing properties will prevent thread leaks of fluids, gases, or steam. It can be used for a multitude of low friction, anti-seize applications requiring maximum performance. It protects all threads from premature wear and prolongs the life of tapered-thread joints under all conditions. Ideal for press fittings. Benefits of using TF-25™ Non-hardening Contains no metallic additives Will not run, drip, or settle out Chemically inert Brushable Versatile and dependable May be used on both ferrous and Non-ferrous metals Lubricants and seals Specifications of 23513 JET-LUBE TF-25 2 1/2 gal pail Base Materials: Aluminum Complex / Petroleum Service Rating: -100°F to 600°F, -73°C to 316°C TDS -
23515 – JET-LUBE TF-25 5 gal pail
$0.93Metal-Free Thread Sealing Compound JET-LUBE TF-25 contains, in part, reprocessed PTFE and graphite in a high-melting, high temperature grease vehicle. It is further fortified with rust, corrosion, and oxidation inhibitors. TF-25's lubricating and sealing properties will prevent thread leaks of fluids, gases, or steam. It can be used for a multitude of low friction, anti-seize applications requiring maximum performance. It protects all threads from premature wear and prolongs the life of tapered-thread joints under all conditions. Ideal for press fittings. Benefits of using TF-25™ Non-hardening Contains no metallic additives Will not run, drip, or settle out Chemically inert Brushable Versatile and dependable May be used on both ferrous and Non-ferrous metals Lubricants and seals Specifications of 23515 JET-LUBE TF-25 5 gal pail Base Materials: Aluminum Complex / Petroleum Service Rating: -100°F to 600°F, -73°C to 316°C TDS -
23523 – TF-25™
$104.24Metal-Free Thread Sealing Compound Jet-Lube TF-25 10 LB. 1 GAL. PAIL contains, in part, reprocessed PTFE and graphite in a high-melting, high temperature grease vehicle. It is further fortified with rust, corrosion, and oxidation inhibitors. TF-25's lubricating and sealing properties will prevent thread leaks of fluids, gases, or steam. It can be used for a multitude of low friction, anti-seize applications requiring maximum performance. It protects all threads from premature wear and prolongs the life of tapered-thread joints under all conditions. Ideal for press fittings. Benefits of using TF-25™ Non-hardening Contains no metallic additives Will not run, drip, or settle out Chemically inert Brushable Versatile and dependable May be used on both ferrous and Non-ferrous metals Lubricants and seals Specifications: Base Materials: Aluminum Complex / Petroleum Service Rating: -100°F to 600°F, -73°C to 316°C -
23711 – NCS-30® ECF™
$129.02Nonmetallic Thread Compound - Environmental Formula JET-LUBE NCS-30 ECF is a premium quality, non-metallic compound containing chemically inert fibers, and extreme pressure and anti-wear additives. These are blended into Jet-Lube's biodegradable base grease, which gives a wide temperature range, superior adhesion to wet steel surfaces, resistance to water wash off and the ability to withstand invert and high-pH muds. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits of using NCS-30 ECF® Biodegradable, non-bio accumulative & non-toxic Contains no metals Excellent performance on high-chrome or nickel alloys Excellent protection against seizing & galling Sticks to wet joints Consistent rig floor make-up Non-conductive for MWD applications Provides maximum protection on wedge thread drill string connection designs Specifications of 23711 NCS-30® ECF™ Base Materials: Complex Thickeners / Synthetic & Vegetable Oils Friction / K-Factor: Relative to API RP 7G 1.0 (Normal), 1.1 (severe) (drill strings) Certifications: Eco-Certified Service Rating: -10°F to 500°F, -23°C to 260°C TDS SDS -
23715 – Jet-Lube NCS-30 ECF 5 Gal. Metal Pail
$465.70Nonmetallic Thread Compound - Environmental Formula JET-LUBE NCS-30 ECF is a premium quality, non-metallic compound containing chemically inert fibers, and extreme pressure and anti-wear additives. These are blended into Jet-Lube's biodegradable base grease, which gives a wide temperature range, superior adhesion to wet steel surfaces, resistance to water wash off and the ability to withstand invert and high-pH muds. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits of using NCS-30 ECF® Biodegradable, non-bio accumulative & non-toxic Contains no metals Excellent performance on high-chrome or nickel alloys Excellent protection against seizing & galling Sticks to wet joints Consistent rig floor make-up Non-conductive for MWD applications Provides maximum protection on wedge thread drill string connection designs Specifications of 23715 Jet-Lube NCS-30 ECF Base Materials: Complex Thickeners / Synthetic & Vegetable Oils Friction / K-Factor: Relative to API RP 7G 1.0 (Normal), 1.1 (severe) (drill strings) Certifications: Eco-Certified Service Rating: -10°F to 500°F, -23°C to 260°C TDS SDS -
23723 Jet-Lube NCS-30 ECF 1 Gal. Pail
$119.59Nonmetallic Thread Compound - Environmental Formula Jet-Lube NCS-30 ECF is a premium quality, non-metallic compound containing chemically inert fibers, and extreme pressure and anti-wear additives. These are blended into Jet-Lube's biodegradable base grease, which gives a wide temperature range, superior adhesion to wet steel surfaces, resistance to water wash off and the ability to withstand invert and high-pH muds. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits of using NCS-30 ECF® Biodegradable, non-bio accumulative & non-toxic Contains no metals Excellent performance on high-chrome or nickel alloys Excellent protection against seizing & galling Sticks to wet joints Consistent rig floor make-up Non-conductive for MWD applications Provides maximum protection on wedge thread drill string connection designs Specifications of 23723 Jet-Lube NCS-30 ECF Base Materials: Complex Thickeners / Synthetic & Vegetable Oils Friction / K-Factor: Relative to API RP 7G 1.0 (Normal), 1.1 (severe) (drill strings) Certifications: Eco-Certified Service Rating: -10°F to 500°F, -23°C to 260°C TDS SDS -
23729 – NCS-30® ECF™
$2,938.87Nonmetallic Thread Compound - Environmental Formula Jet-Lube NCS-30 ECF is a premium quality, non-metallic compound containing chemically inert fibers, and extreme pressure and anti-wear additives. These are blended into Jet-Lube's biodegradable base grease, which gives a wide temperature range, superior adhesion to wet steel surfaces, resistance to water wash off and the ability to withstand invert and high-pH muds. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits of using NCS-30 ECF® Biodegradable, non-bio accumulative & non-toxic Contains no metals Excellent performance on high-chrome or nickel alloys Excellent protection against seizing & galling Sticks to wet joints Consistent rig floor make-up Non-conductive for MWD applications Provides maximum protection on wedge thread drill string connection designs Specifications of 23729 NCS-30® ECF™ Base Materials: Complex Thickeners / Synthetic & Vegetable Oils Friction / K-Factor: Relative to API RP 7G 1.0 (Normal), 1.1 (severe) (drill strings) Certifications: Eco-Certified Service Rating: -10°F to 500°F, -23°C to 260°C TDS SDS -
23911 – HDD COPPER 2 gal pail
$159.24Horizontal Directional Drilling Tool Joint & Drill Collar Compound A premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. HDD KOPR uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE but in a smaller particle size range to accommodate automatic application systems. Benefits: Contains no lead or zinc Extreme pressure additives Rust & corrosion inhibitors Sticks to wet joints Smooth grease base for brushability & stability over a wide temperature range Consistent makeup Unequalled resistance to downhole makeup Specially formulated to meet the requirements of the auto-lube system on most major HDD rigs Low pour point oil for optimum low temperature performance Specifications: Base Materials: Anhydrous Calcium / Petroleum Certifications: Not classified as marine pollutant – DOT Approval CA2004080025., Conforms to assembly bill 1953 Service Rating: -55°C to 149°C, -65°F to 300°F Equivalent to Ditch Witch 256-031 2 gal Summer Spray TDR SDS