Firefighting
Showing 46–63 of 63 results
-
Sale!
RamFan M16515-US EX150Li Dual Rapid Charger
Original price was: $1,231.00.$1,169.45Current price is: $1,169.45.Dual Rapid Chrgr, Li-Ion, 52V 3A/Channel, 115/240V, 5-15P -
Sale!
RamFan M16515DC EX150Li Dual Battery Charger
Original price was: $1,154.00.$1,096.30Current price is: $1,096.30.Dual Battery Chrgr, Li-Ion, 52V 1.5A/Channel, 12/24VDC -
Sale!
RamFan M1C-6500AC Dual Battery Charger
Original price was: $889.00.$755.65Current price is: $755.65.Battery Blower AC/DC 52V - AC connectionLi-Ion, 52V 3A, 115/240VAC, 5-15P US Plug -
Sale!
RamFan M1C-6500DC Dual Battery Charger
Original price was: $889.00.$755.65Current price is: $755.65.Battery Blower AC/DC 52V - AC connectionLi-Ion, 52V 1A, Dual Voltage (12 or 24 VDC) -
RamFan M5-40V EX50Li PRO-CONNECT Battery Pack, 40V 10Ah
$534.00The RAMFAN M-Series 40V / 10Ah battery pack powers the EX50Li line. It is a water-resistant lithium-ion pack whose electronics carry built-in protection, monitoring, power control and battery conditioning. It fits the EX50Li Gen3 and retrofits to Gen2. What does PRO//connect actually give you? PRO//connect is RAMFAN's wireless link into the pack. It reports the pack's condition over time, measures internal conditions, tracks cycle counts, upgrades BMS firmware and supports basic maintenance and troubleshooting without opening anything. Why it matters on a fleet: a battery's age is invisible until it fails on a job. Cycle counts read off the pack turn "this one feels weak" into a number you can act on, and firmware moves to the pack instead of the pack moving to a bench. [PROOF: fleet size and the interval at which [CLIENT NAME] now retires a pack, once cycle data was available] What happens if one cell fails in the field? The M and R-Series packs are built with fail-safe redundancy: if a single cell fails, the pack stays operational. Packs are also swappable, so a discharged pack can be exchanged for a charged one without powering the equipment down. The failure mode this addresses: on a ventilation job the cost of a dead pack is not the pack, it is the interruption. Hot-swapping keeps the fan running through the exchange. [PROOF: measured downtime avoided per swap on a [JOB TYPE] callout] Does it work in the cold? Preheat Mode activates in cold-temperature conditions and uses the internal battery architecture to raise cell temperature safely before load, which improves cold-weather performance and readiness. It runs transparently to the user, with status visible through PRO//connect. [PROOF: lowest ambient temperature at which [CLIENT NAME] has started a pack in Preheat Mode, and the time to ready] How is it charged? Two dual-pack rapid chargers cover mains and vehicle power, both charging two packs at once: R25515: 120 to 240 VAC input, 3A per pack, simultaneously. R25515DC: 12 to 24 VDC input, 1.5A per pack, simultaneously. RAMFAN recommends ordering two packs so one is always charged. Specifications above are RAMFAN's published figures for this order number. Source: https://www.ramfan.com/product/ramfan-40v-10ah-battery-pack -
RamFan MK-5000 VX700 Warehouse Cart (Cart Only)
$2,229.00The MK-5000 is the warehouse cart for the RAMFAN VX700 large structure ventilator. It is supplied as the cart only: the VX700 ventilator is not included. What is this cart for? The VX700 belongs to RAMFAN's large structure ventilation line, the equipment brought in when a space is too large or too complex to clear with a portable PPV fan. Machines in that class are moved to the opening rather than carried, and the cart is how a VX700 is transported and positioned on site. [PROOF: how [CLIENT NAME] moves a VX700 without a cart today, and the crew count and time that takes] What this page does not claim RAMFAN publishes no separate specification sheet for the MK-5000. Rather than restate the ventilator's figures on the cart's page, this listing carries only what the 2026 RAMFAN price book states for this order number: the VX700 warehouse cart, cart only, order number MK-5000. [PROOF: cart load rating, dimensions, wheel type and weight, once RAMFAN supplies a data sheet for MK-5000] Ordering The cart is matched to the VX700 and is ordered by its own part number. For the ventilator itself, or to confirm the cart suits a specific VX700 configuration, contact us with the fan's serial number. Context on the VX700 line is from https://www.ramfan.com/product/vx700. No performance figure on that page describes this cart. -
RamFan R2-360-AH-U Battery Pack
$372.00AC/DC Battery - Multipurpose Blower40v 6Ah for EX50Li -
Sale!
RamFan R2-40V EX50Li PRO-CONNECT Battery Pack
Original price was: $500.00.$475.00Current price is: $475.00.PRO-CONNECT Battery Pack, 40v 6Ah for EX50Li, Bluetooth -
Sale!
RamFan R25515-US EX50Li Dual Rapid Charger
Original price was: $1,311.00.$1,245.45Current price is: $1,245.45.Dual Rapid Charger, Li-Ion, 40V 3A/Channel, 115/240V, 5-15P -
Sale!
RamFan R25515DC EX50Li Dual Battery Charger
Original price was: $1,270.00.$1,206.50Current price is: $1,206.50.Dual Battery Charger, Li-Ion, 40V 1.5A/Channel, 12/24VDC -
Sale!
RamFan R2C-5500AC Dual Battery Charger
Original price was: $752.00.$639.20Current price is: $639.20.AC/DC Battery - Multipurpose BlowerLi-Ion, 40V 3A, 115/240VAC, 5-15P -
Sale!
RamFan R2C-5500DC Dual Battery Charger
Original price was: $752.00.$639.20Current price is: $639.20.AC/DC Battery - Multipurpose BlowerLi-Ion, 40V 1A, Dual Voltage (12 or 24 VDC) -
Sale!
RamFan WB5001LB Water-powered Ventilator
Original price was: $3,362.00.$3,193.90Current price is: $3,193.90.Water PoweredPositive Pressure Ventilators1.5" BSP inlet/outlet -
Sale!
RamFan WB5001LNH Water-powered Ventilator
Original price was: $2,645.00.$2,248.25Current price is: $2,248.25.Water PoweredPositive Pressure Ventilators1.5" NST/NH inlet -
Sale!
RamFan WD5010 WF540 Water-powered Ventilator
Original price was: $6,316.00.$6,000.20Current price is: $6,000.20.Water PoweredPositive Pressure Ventilatorswith 1.5" BSP Inlet, 2.5" Outlet -
Sale!
RamFan WK5001 WX500 Water-powered Ventilator
Original price was: $4,356.00.$4,138.20Current price is: $4,138.20.Water Powered WX500 Water-powered Ventilator - 1.5" BSP in/2.5" BSP out, Integrated Mister -
THE BULLDOG MFH Portable Fan Heater T3 Model
EXHEAT Industrial’s MFH ‘The Bulldog’® Portable Fan Heater is the world’s first truly portable hazardous area fan assisted heater. It combines efficient design with simple functionality to provide a portable heating solution for use in Zone 1 or 2 (IIA, IIB and H2) hazardous environments. Certified to the new EN 80079-36 and EN 80079-37 standards for constructional safety, The Bulldog comes ready to ‘plug and play’ with the option of fitting a plug, or hard wiring to an isolator unit. Robust Design: Compact and rigid housing suitable for onshore and offshore usage. Approved for the North Sea: For applications Onshore and Offshore including the Rental market Portable and Lightweight: Suitable for single user operation, with the addition of anti-static castors. Can be supplied on a long flying lead to get heat where you need it. Up to 6kW: Heat can be directed to target a single individual or warm a mid-sized room to comfortable operating temperatures. Direct Efficiency: Provides warm flow of air for operators at up to 5m. Cold Resistant: Suitable for ambient temperatures as low as -40°C and up to +40°C. Temperature-Specific Options: Available in T3 and T4 temperature classes. Specifications Certification ATEX II 2 G D Ex h Ex db eb IIB + H2 T3 to T4 Gb Ex tb IIIC T200°C to T135°C Db IECEx Ex db eb IIB + H2 T3 to T4 Gb Ex tb IIIC T200°C to T135°C Db Zones Zones 1 & 2 for Gas and Zones 21 & 22 for Dust Main Materials Casing: PA66 30% with EMI shielding Impeller: PA66 30% with EMI shielding with epoxy coated aluminium hub Ex d Enclosure: Anodised extruded aluminium Ex e Enclosure: Stainless steel Motor Housing: Epoxy coated aluminium Mounting Adjustable feet at each corner allow for a stable standing on uneven surfaces Voltage Single phase 220V, 230V, 240V, 254V & 277V, three phase 380V, 400V, 415V, 440V, 480V & 690V 50/60Hz Element Finned stainless steel tubular elements Dimensions Length 475mm, width 470mm, height 530mm Ingress Protection IP65 Weight 30kg, excluding cable and any optional components Trademark EU IPO trademark registration number 06118069 Model Voltage (V) Phase T Class Nominal Output (kW) Air Flow approx. (m³/hr) Air Temp. Delta approx (°C) Max Current (A) 50Hz 60Hz 50Hz 60Hz MFH-6-230 230/220 1 T3 6/5.5 1050 1260 17.7 14.7 26.7 MFH-6-254 254/240 1 T3 6/5.5 1050 1260 17.7 14.7 24.2 MFH-6-277 277 1 T3 6 1050 1260 17.7 14.7 22.3 MFH-6-400 400/380 3 T3 6/5.5 1050 1260 17.7 14.7 9.3 MFH-6-440 440/415 3 T3 6/5.5 1050 1260 17.7 14.7 8.5 MFH-6-480 480 3 T3 6 1050 1260 17.7 14.7 7.8 MFH-6-600 600 3 T3 6 1050 1260 18.9 15.9 6.4 MFH-6-690 690 3 T3 6 1050 1260 18.9 15.9 5.6 Brochure: Fan Heaters IECEx ITS 17.0012X Certificate ITS17 ATEX 101743X Certificate Installation Manual: MFH Installation Manual: MFH Ducting CU TR Certificate Datasheet: MFH -
THE BULLDOG MFH Portable Fan Heater T4 Model
EXHEAT Industrial’s MFH ‘The Bulldog’® Portable Fan Heater is the world’s first truly portable hazardous area fan assisted heater. It combines efficient design with simple functionality to provide a portable heating solution for use in Zone 1 or 2 (IIA, IIB and H2) hazardous environments. Certified to the new EN 80079-36 and EN 80079-37 standards for constructional safety, The Bulldog comes ready to ‘plug and play’ with the option of fitting a plug, or hard wiring to an isolator unit. Robust Design: Compact and rigid housing suitable for onshore and offshore usage. Approved for the North Sea: For applications Onshore and Offshore including the Rental market Portable and Lightweight: Suitable for single user operation, with the addition of anti-static castors. Can be supplied on a long flying lead to get heat where you need it. Up to 6kW: Heat can be directed to target a single individual or warm a mid-sized room to comfortable operating temperatures. Direct Efficiency: Provides warm flow of air for operators at up to 5m. Cold Resistant: Suitable for ambient temperatures as low as -40°C and up to +40°C. Temperature-Specific Options: Available in T3 and T4 temperature classes. Specifications Certification ATEX II 2 G D Ex h Ex db eb IIB + H2 T3 to T4 Gb Ex tb IIIC T200°C to T135°C Db IECEx Ex db eb IIB + H2 T3 to T4 Gb Ex tb IIIC T200°C to T135°C Db Zones Zones 1 & 2 for Gas and Zones 21 & 22 for Dust Main Materials Casing: PA66 30% with EMI shielding Impeller: PA66 30% with EMI shielding with epoxy coated aluminium hub Ex d Enclosure: Anodised extruded aluminium Ex e Enclosure: Stainless steel Motor Housing: Epoxy coated aluminium Mounting Adjustable feet at each corner allow for a stable standing on uneven surfaces Voltage Single phase 220V, 230V, 240V, 254V & 277V, three phase 380V, 400V, 415V, 440V, 480V & 690V 50/60Hz Element Finned stainless steel tubular elements Dimensions Length 475mm, width 470mm, height 530mm Ingress Protection IP65 Weight 30kg, excluding cable and any optional components Trademark EU IPO trademark registration number 06118069 Model Voltage (V) Phase T Class Nominal Output (kW) Air Flow approx. (m³/hr) Air Temp. Delta approx (°C) Max Current (A) 50Hz 60Hz 50Hz 60Hz MFH-3-230 230/220 1 T4 3/2.75 1050 1260 8.8 7.4 13.6 MFH-3-254 254/240 1 T4 3/2.75 1050 1260 8.8 7.4 12.4 MFH-3-277 277 1 T4 3 1050 1260 8.8 7.4 11.4 MFH-3-400 400/380 3 T4 3/2.75 1050 1260 8.8 7.4 4.9 MFH-3-440 440/415 3 T4 3/2.75 1050 1260 8.8 7.4 4.6 MFH-3-480 480 3 T4 3 1050 1260 8.8 7.4 4.3 MFH-3.7-600 600 3 T4 3.7 1050 1260 10.9 9.1 4.2 MFH-3.7-690 690 3 T4 3.7 1050 1260 10.9 9.1 3.7 Brochure: Fan Heaters IECEx ITS 17.0012X Certificate ITS17 ATEX 101743X Certificate Installation Manual: MFH Installation Manual: MFH Ducting CU TR Certificate Datasheet: MFH