Valve Fittings and Adapters

What is the Sealweld Flow Wolf Buttonhead Fitting - Stainless Steel? The patented Flow Wolf design was invented in the field by Sealweld founder W.J. 'Bill' Chisholm after conventional manufacturers' sealant fittings plugged off and blew out their check mechanisms while injecting super-heavy sealant into severely leaking valves. Designed to be the strongest and most durable sealant fitting on the market; a vented cap protects the buttonhead flange and connecting threads from corrosion and damage. Preferred by many of the world's largest pipeline operators; Sealweld tells buyers to specify 'Sealweld Flow Wolf sealant fittings - no substitutes' on new valve orders. PE Energy supplies the genuine Sealweld Flow Wolf Buttonhead Fitting - Stainless Steel across the USA — request a quote for any part number below. Where is the Flow Wolf Buttonhead Fitting - Stainless Steel used?Sealant injection into pipeline ball/gate/plug valves under pressure; installed into the valve body/stem. Quad Seal variant for extreme service: offshore platforms, inside buildings, compressor buildings and meter stations, high-concentration sour/acid gas, hazardous or toxic gases and liquids where zero leakage is required. Internal check valves are specified when commissioning new valves so they can be serviced under pressure safely. Leak-Lock adapters are emergency devices fitted over a leaking or damaged giant buttonhead fitting - explicitly NOT a permanent repair, used until turnaround/depressurization. Specifications Buttonhead Fitting Threads Materials1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT in .316 stainless steel or carbon steel; 3/4"-14 NPT stainless steel (Flow Wolf). Standard SW-style giant buttonhead also in 1/8"-27 NPT (single ball check; not suitable for heavy sealants at high pressure); larger SW sizes have double-ball check. Quad Seal4 internal sealing points; all .316 stainless steel construction (no plating to fail); patented Flow Wolf threaded cage; threads 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT. Internal Check ValvesStainless steel only; patented Flow Wolf threaded cage prevents the ball check being accidentally injected into the valve when pumping heavy sealant; ABSA Certificate of Authorization, Canadian Registration Number CRN 0C07140.2; threads 1/4"-18, 3/8"-18, 1/2"-14 NPT. Leak LockLeak-Lock #1 = giant buttonhead size; Leak-Lock #2 = small buttonhead size; both also in metal-seat versions and with-PTFE-seal versions, stainless steel. Metal-seated Leak-Lock #1 adapter is for capped fittings ONLY and provides an additional check valve so the valve can continue to be serviced in-line under pressure. PTFE gasket inserts available in ML1 and ML2 sizes. Adapter KitsFlow Wolf Valve Fitting Adapter Kits (legacy D-FW-KIT-02 / -05 / -06; new 420171 / 420172 / 420173) - assortments of the most popular adapters for attaching the pump hose to different valve fitting styles; customizable. Which Sealweld part numbers are available? Part NumberPackaging / Variant 420436Flow Wolf Buttonhead Fitting - 1/2" - Stainless Steel - CRN-MX 420453Flow Wolf Buttonhead Fitting - 1/4" - Stainless Steel - CRN-MX 420479Flow Wolf Buttonhead Fitting - 3/8" - Stainless Steel - CRN-MX 420469Flow Wolf Buttonhead Fitting - 3/4" - Stainless Steel - CRN-MX 420459Flow Wolf Buttonhead Fitting - 1" - Stainless Steel - CRN-MX 420430Flow Wolf Buttonhead Fitting - 1/2" - Stainless Steel 420448Flow Wolf Buttonhead Fitting - 1/4" - Stainless Steel 422928Flow Wolf Buttonhead Fitting - 1/2"-14 BSPT - Stainless Steel 420472Flow Wolf Buttonhead Fitting - 3/8" - Carbon Steel 420428Flow Wolf Buttonhead Fitting - 1/2" - Carbon Steel Every part number is available for quotation — contact PE Energy with the Sealweld part number and quantity.

What is the Sealweld Flow Wolf Leak-Lock #2 - Stainless Steel? The patented Flow Wolf design was invented in the field by Sealweld founder W.J. 'Bill' Chisholm after conventional manufacturers' sealant fittings plugged off and blew out their check mechanisms while injecting super-heavy sealant into severely leaking valves. Designed to be the strongest and most durable sealant fitting on the market; a vented cap protects the buttonhead flange and connecting threads from corrosion and damage. Preferred by many of the world's largest pipeline operators; Sealweld tells buyers to specify 'Sealweld Flow Wolf sealant fittings - no substitutes' on new valve orders. PE Energy supplies the genuine Sealweld Flow Wolf Leak-Lock #2 - Stainless Steel across the USA — request a quote for any part number below. Where is the Flow Wolf Leak-Lock #2 - Stainless Steel used?Sealant injection into pipeline ball/gate/plug valves under pressure; installed into the valve body/stem. Quad Seal variant for extreme service: offshore platforms, inside buildings, compressor buildings and meter stations, high-concentration sour/acid gas, hazardous or toxic gases and liquids where zero leakage is required. Internal check valves are specified when commissioning new valves so they can be serviced under pressure safely. Leak-Lock adapters are emergency devices fitted over a leaking or damaged giant buttonhead fitting - explicitly NOT a permanent repair, used until turnaround/depressurization. Specifications Buttonhead Fitting Threads Materials1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT in .316 stainless steel or carbon steel; 3/4"-14 NPT stainless steel (Flow Wolf). Standard SW-style giant buttonhead also in 1/8"-27 NPT (single ball check; not suitable for heavy sealants at high pressure); larger SW sizes have double-ball check. Quad Seal4 internal sealing points; all .316 stainless steel construction (no plating to fail); patented Flow Wolf threaded cage; threads 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT. Internal Check ValvesStainless steel only; patented Flow Wolf threaded cage prevents the ball check being accidentally injected into the valve when pumping heavy sealant; ABSA Certificate of Authorization, Canadian Registration Number CRN 0C07140.2; threads 1/4"-18, 3/8"-18, 1/2"-14 NPT. Leak LockLeak-Lock #1 = giant buttonhead size; Leak-Lock #2 = small buttonhead size; both also in metal-seat versions and with-PTFE-seal versions, stainless steel. Metal-seated Leak-Lock #1 adapter is for capped fittings ONLY and provides an additional check valve so the valve can continue to be serviced in-line under pressure. PTFE gasket inserts available in ML1 and ML2 sizes. Adapter KitsFlow Wolf Valve Fitting Adapter Kits (legacy D-FW-KIT-02 / -05 / -06; new 420171 / 420172 / 420173) - assortments of the most popular adapters for attaching the pump hose to different valve fitting styles; customizable. Which Sealweld part numbers are available? Part NumberPackaging / Variant 420194Flow Wolf Leak-Lock #2 - Stainless Steel - SBH 420195Flow Wolf Leak-Lock #2 - Stainless Steel - MegaLock 420191Flow Wolf Leak-Lock #2 - Stainless Steel - Metal Seat 420189Flow Wolf Leak-Lock #2 - Carbon Steel - SBH Every part number is available for quotation — contact PE Energy with the Sealweld part number and quantity.

Packing Injector - Stainless Steel