Disposable Masks
Showing all 41 results
-
3M 1818 Disposable Particulate Respirator Surgical Mask
3M™ Disposable Respirator Mask includes flat and has unique bi-directional pleat design with horizontal ties for facial conformability. It features soft breathable inner lining and is preferred for its comfort and breathability. It is available with or without an attached face shield. Features Comfortable and breathable Horizontal ties Face shield is anti-fog, anti-reflective Tie-on mask is soft and lightweight for comfortable wear Greater than 98% Bacterial Filtration Efficiency (BFE) when challenged with a mean particle size of approximately 2.7 microns Helps reduce potential exposure of the wearer to blood and body fluids Adjustable to fit a variety of facial shapes and sizes Hypoallergenic to reduce chance of allergic reaction With or without attached face shield Benefits Flat, with bi-directional pleats and horizontal ties for facial conformability Soft breathable inner lining AFAR technology has greater than 80% light absorption, reducing glare which is a contributing factor to eye strain 3M AFAR face shield (Anti- fog anti-reflective) Specifications Determined by ASTM hydrostatic pressure test method Product Attributes Exhalation Valve » No Mask Type » 1818 Respirator Size » One Size Fits Most Standard » ASTM Application » Disposable Particulate Respirator » Surgical Mask -
3M 1820 Disposable Particulate Respirator Surgical Mask
3M™ 1820 Earloop Disposable Procedure Mask is ideal for general patient care and other environments with minimum fluid exposure Features Flat, easy on/off ear loop mask with standard pleats Lightweight, comfortable and easy to breathe through Intended for use in environments with minimal fluid exposure Applications General patient care and other environments with minimum fluid exposure Isolation IC Practices Central Processing SPD Clinics Long Term Care Facilties Home Health Care Product Attributes Exhalation Valve » No Mask Type » 1820 Respirator Size » One Size Fits Most Standard » OSHA Application » Disposable Particulate Respirator » Surgical Mask -
3M 1820FS Disposable Particulate Respirator Procedure Mask
3M™ Flat, earloop face masks for general patient care applications, with and without attached face shield. Product Attributes Exhalation Valve » No Mask Type » 1820FS Respirator Size » One Size Fits Most Standard » ASTM Application » Disposable Particulate Respirator » Procedure Mask -
3M 1840FS Disposable Particulate Respirator Procedure Mask
3M™ High Fluid-resistant Procedure Mask comes with face shield that features lightweight, comfortable and easy to breathe through design. It has passed ASTM's highest level of protection of 160 mmHg. It is intended for general patient care and procedure environments, ER, cardiac labs, etc, where high levels of fluid protection is required. It is sold as 50 per box. Features Comfortable and easy to breath through Lightweight Specifications Passed ASTM F1862 at 160 mm Hg Applications High levels of fluid protection is required Product Attributes Exhalation Valve » No Mask Type » 1840FS Respirator Size » One Size Fits Most Standard » ASTM Application » Disposable Particulate Respirator » Procedure Mask -
3M N100 Disposable Particulate Respirator With Cool Flow Exhalation Valve
3M™ N100 Disposable Respirator is certified to provide at least 99.97% filter efficiency against solid and liquid particles. It comes with buckle adjustable straps, a 3M™ Cool Flow™ exhalation valve and a conformable face seal make this a comfortable, durable respirator. It is lightweight and comfortable which includes all filter design. It meets NIOSH 42 CFR 84 requirement and reduces potential for eyewear fogging. It is applicable in pharmaceutical, welding, brazing, soldering, torch cutting, metal pouring. Do not use for gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting. Features 3M™ Cool Flow™ Exhalation Valve Compatible with a variety of protective eyewear and hearing protection Comfortable foam face seal Adjustable nose clip Fully adjustable head straps help provide a secure fit Adjustable nose clip reduces potential for eyewear fogging and helps ensure a better seal and fit Reduces potential for eyewear fogging Buckle adjustable straps, a single tug helps provide a comfortable, secure fit Specifications NIOSH 42 CFR84 Standard OSHA Hazard Communication Standard 29 CFR 1910.1200 Applications Pharmaceutical Welding Brazing Soldering Torch Cutting Metal Pouring Dust Mist Caution WARNING! These respirators help reduce exposures to certain airborne contaminants Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging Do Not Use For: Gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting Aerosol concentrations that exceed 10 times the OSHA PEL, or applicable government regulations, whichever is lower This respirator does not supply oxygen. Product Attributes Exhalation Valve » Yes Mask Type » N100 Respirator Size » One Size Fits Most Standard » NIOSH » OSHA Application » Disposable Particulate Respirator -
3M N95 Disposable Particulate Respirator
3M™ 8210Plus N95 Particulate Disposable Respirator features soft nose foam pad, adjustable nose clip provides a custom fit, the PLUS offers new comfortable braided headbands and staple free attachment. It meets NIOSH 42 CFR 84 N95 requirements and reduces potential for eyewear fogging. It is applicable in grinding, sanding, crushing, sawing, smoke and welding fumes. It is sold as 20 per box. Do not use for gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting. Features Compatible with a variety of protective eyewear and hearing protection Comfortable braided headbands Braided headbands with two-strap design and staple free dual point attachment help provide a comfortable and secure fit Staple free attachment Adjustable nose clip reduces potential for eyewear fogging and helps ensure a secure seal and fit Soft nose foam pad Cushioning nose foam Specifications NIOSH approved N95 TC-84A-0007 Tested as per 42 CFR84 OSHA Hazard Communication Standard 29 CFR 1910.1200 Applications Grinding Sanding Sweeping Bagging Other dusty applications Woodworking Sawing Welding fume Crushing Smoke Dust Mist Caution WARNING! This respirator helps protect against certain particles Misuse may result in sickness or death For proper use, see supervisor or instructions or call 3M OHandESD Technical Service. 1-800-243-4630 Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging Do Not Use For: Gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting Aerosol concentrations that exceed 10 times the OSHA PEL, or applicable government regulations, whichever is lower This respirator does not supply oxygen Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » One Size Fits Most Standard » NIOSH » OSHA Application » Disposable Particulate Respirator -
3M N95 Disposable Particulate Respirator Surgical Mask
3M™ Health care respirator designed to help provide respiratory protection for the wearer. It meets CDC guidelines for M. tuberculosis exposure control. As a disposable particulate respirator, it is intended to reduce wearer exposure to certain airborne particles including those generated by electro cautery, laser surgery, and other powered medical instruments. As a surgical mask, it is designed to be fluid resistant to splash and spatter of blood and other infectious materials. WARNING: These respirators help reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Features No components made from natural rubber latex Designed for ease of breathing Soft nose foam and smooth inner materials feel comfortable against the skin Unique, three-panel design fits a wide range of face shapes and sizes Flat fold design offers convenient storage and portability Individual packaging helps protect the respirator from contamination before use Compatible with a variety of eyewear Sculpted top panel helps conform to nose and eye contours of the face allowing more room for eyewear Embossed top panel helps reduce eyewear fogging Sculpted nose panel helps improve field of vision Adjustable nose clip helps provide a custom, secure seal Innovative chin tab designed for ease of positioning, donning and adjustment Specifications NIOSH approved N95 Meets CDC guidelines for M. tuberculosis exposure control FDA cleared for use as a surgical mask > 99 (omit:5)% BFE (Bacterial Filtration Efficiency) according to ASTM F2101 Highest level of fluid resistance according to ASTM F1862 at 160 mm Hg Applications Operating Rooms Clinics TB Wards Patient Care Labor And Delivery Infection Control Practices Laboratory Emergency Or Pandemic Preparedness Caution WARNING: These respirators help reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » One Size Fits Most Standard » NIOSH Application » Disposable Particulate Respirator » Surgical Mask -
3M N95 Disposable Particulate Respirator With Cool Flow Exhalation Valve
3M™ N95 Particulate Disposable Respirator is NIOSH certified to have at least 95% filter efficiency at removing solid and liquid particles. It comes with innovative M-nose clip that provides a good face seal and the 3M™ Cool Flow™ exhalation valve that reduces heat and humidity build up inside the respirator for added comfort. It is lightweight, economical protection and includes no spare parts to clean and maintain. It meets NIOSH 42 CFR 84 requirement and reduces potential for eyewear fogging. It promotes greater worker comfort and contributes to increased wear time. It is applicable in grinding, sanding, sweeping, bagging, machining and other dusty operations. It is sold as 10 per box. Do not use for gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting. Features 3M™ Cool Flow™ Exhalation Valve Compatible with a variety of protective eyewear and hearing protection Adjustable M-nose clip reduces potential for eyewear fogging and helps ensure a secure seal and fit Braided headbands two-strap design with dual point attachment helps provide a secure fit Lightweight Promotes greater worker comfort Contributes to increased wear time No spare parts to clean and maintain Promotes easier communication Reduces potential for eyewear fogging Benefits All filter design Provides economical protection No spare parts to clean and maintain Specifications NIOSH approved N95 TC-84A-1299 Tested as per 42 CFR84 OSHA Hazard Communication Standard 29 CFR 1910.1200 Applications Grinding Sanding Sweeping Bagging Other dusty applications Dust Mist Caution WARNING! This respirator helps protect against certain particles Misuse may result in sickness or death For proper use, see supervisor or instructions or call 3M OHandESD Technical Service. 1-800-243-4630 For proper use, see supervisor or instructions or call 3M OHandESD Technical Service Do Not Use For: Gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting Aerosol concentrations that exceed 10 times the OSHA PEL, or applicable government regulations, whichever is lower This respirator does not supply oxygen Product Attributes Exhalation Valve » Yes Mask Type » N95 Respirator Size » One Size Fits Most Standard » NIOSH » OSHA Application » Disposable Particulate Respirator -
3M N95 Disposable Particulate Respirator With VFlex Exhalation Valve
3M™ VFlex™ Health Care Particulate Respirator and Surgical Mask 1805, N95 400/Case Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » One Size Fits Most Standard » NIOSH » OSHA Application » Disposable Particulate Respirator -
3M P100 Disposable Particulate Respirator With Cool Flow Exhalation Valve
3M™ P100 Particulate Disposable Respirator features a 3M™ Cool Flow™ exhalation valve, a face seal, adjustable nose clip, lightweight construction and an all filter design. It offers the highest level of NIOSH rated filtration efficiency in a maintenance free respirator. It is lightweight, economical protection and includes no spare parts to clean and maintain. It meets NIOSH 42 CFR 84 requirement and reduces potential for eyewear fogging. It promotes greater worker comfort and contributes to increased wear time. It is applicable in pharmaceutical, welding, brazing, soldering, torch cutting, metal pouring. Do not use for gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting. Features 3M™ Cool Flow™ Exhalation Valve Compatible with a variety of protective eyewear and hearing protection Comfortable foam face seal Fully adjustable head straps help provide a secure fit Lightweight Adjustable nose clip reduces potential for eyewear fogging and helps ensure a better seal and fit Promotes easier communication Adjustable buckle straps No spare parts to clean and maintain Reduces potential for eyewear fogging Benefits All filter design Provides economical protection No spare parts to clean and maintain Promotes easier communication Promotes easier communication Specifications NIOSH approved TC-84A-2561 Tested as per 42 CFR84 OSHA Hazard Communication Standard 29 CFR 1910.132 Applications Pharmaceutical Welding Brazing Soldering Torch Cutting Metal Pouring Dust Mist Caution WARNING! This respirator helps protect against certain particles Misuse may result in sickness or death For proper use, see supervisor or instructions or call 3M OHandESD Technical Service. 1-800-243-4630 For proper use, see supervisor or instructions or call 3M OHandESD Technical Service Do Not Use For: Gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting Aerosol concentrations that exceed 10 times the OSHA PEL, or applicable government regulations, whichever is lower This respirator does not supply oxygen Product Attributes Exhalation Valve » Yes Mask Type » P100 Respirator Size » One Size Fits Most Standard » NIOSH » OSHA Application » Disposable Particulate Respirator -
3M P100 Disposable Particulate Respirator With Exhalation Valve
3M™ P100 Disposable Respirator Mask uses a variety of patented technologies and features that enable them to filter a broad range of particles, nuisance odors and OSHA substance specific contaminants. It meets NIOSH 42 CFR 84 N100 and P100 requirements and has a minimum filter efficiency of 99.97%. Features 3M™ Cool Flow™ Exhalation Valve Comfortable foam face seal Adjustable pre-threaded headbands Specifications NIOSH approved Applications Dust Mist Product Attributes Exhalation Valve » Yes Mask Type » P100 Respirator Size » One Size Fits Most Standard » NIOSH Application » Disposable Particulate Respirator -
3M P95 Disposable Particulate Respirator With Cool Flow Exhalation Valve
3M™ P95 Particulate Disposable Respirator is certified to have at least 95% filter efficiency against solid and liquid particles. It features a conformable M-nose clip for a good fit, 3M™ Cool Flow™ exhalation valve to reduce heat and moisture inside the respirator and a face seal ring for better comfort and fit over a broad range of face sizes. It is lightweight, economical protection and includes no spare parts to clean and maintain. It meets NIOSH 42 CFR 84 requirement and reduces potential for eyewear fogging. It is applicable in grinding, sanding, sweeping, bagging, machining and other dusty or oily operations. It is sold as 10 per box. Do not use for gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting. Features 3M™ Cool Flow™ Exhalation Valve Compatible with a variety of protective eyewear and hearing protection Adjustable M-nose clip reduces potential for eyewear fogging and helps ensure a secure seal and fit Two-strap design with dual point attachment helps provide a comfortable, secure fit Lightweight construction enhances worker comfort and wear time Comfortable foam face seal No spare parts to clean and maintain Braided comfort headband and durability Reduces potential for eyewear fogging Benefits All filter design Provides economical protection No spare parts to clean and maintain Specifications NIOSH approved P95 TC-84A-1166 Tested as per 42 CFR84 OSHA Hazard Communication Standard 29 CFR 1910.1200 Applications Grinding Sanding Sweeping Bagging Machining Other dusty/oily operations Dust Mist Caution WARNING! This respirator helps protect against certain particles Misuse may result in sickness or death For proper use, see supervisor or instructions or call 3M OHandESD Technical Service. 1-800-243-4630 For proper use, see supervisor or instructions or call 3M OHandESD Technical Service Do Not Use For: Gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting Aerosol concentrations that exceed 10 times the OSHA PEL, or applicable government regulations, whichever is lower This respirator does not supply oxygen Product Attributes Exhalation Valve » Yes Mask Type » P95 Respirator Size » One Size Fits Most Standard » NIOSH » OSHA Application » Disposable Particulate Respirator -
3M R95 Disposable Particulate Respirator
3M™ R95 Particulate Disposable Respirator is certified to provide at least 95% efficiency against solid and liquid particles, including oils. It is lightweight and comfortable that includes no spare parts to clean and maintain. It meets NIOSH 42 CFR 84 requirement and promotes greater worker comfort. It is economical protection that contributes to increased wear time. It is applicable in foundries, lab settings, agriculture, petrochemical, undercoating. It is sold as 20 per box. Do not use for gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting. Features Compatible with a variety of protective eyewear and hearing protection Comfortable Two-strap design with dual point attachment helps provide a secure fit Lightweight Adjustable nose clip reduces potential for eyewear fogging and helps ensure a better seal and fit Cushioning nose foam Collapse resistant shell for increased durability Carbon filter for relief against nuisance levels of organic vapor Benefits All filter design Provides economical protection No spare parts to clean and maintain Specifications NIOSH approved R95 TC-84A-1350 Tested as per 42 CFR84 OSHA Hazard Communication Standard 29 CFR 1910.1200 Applications Foundries Lab Settings Agriculture Petrochemical Undercoating Dust Mist Caution WARNING! This respirator helps protect against certain particles Misuse may result in sickness or death For proper use, see supervisor or instructions or call 3M OHandESD Technical Service. 1-800-243-4630 For proper use, see supervisor or instructions or call 3M OHandESD Technical Service Do Not Use For: Gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting Aerosol concentrations that exceed 10 times the OSHA PEL, or applicable government regulations, whichever is lower This respirator does not supply oxygen Product Attributes Exhalation Valve » No Mask Type » R95 Respirator Size » One Size Fits Most Standard » NIOSH » OSHA Application » Disposable Particulate Respirator -
3M Small N95 Disposable Particulate Respirator
3M™ N95 Particulate Disposable Respirator features adjustable nose clip provides a custom fit and secure seal. It is designed to provide reliable worker protection against mechanically and thermally generated particles. It involves durable collapse resistant inner shell, lightweight off-the-face design and excellent fit, designed for smaller faces. It is tested to and meets the performance requirements of AS/NZS 1716. It reduces potential for eyewear fogging and is applicable in grinding, sanding, crushing, sawing, smoke and welding fume. It is sold as 20 per box. Do not use for gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting. Features Compatible with a variety of protective eyewear and hearing protection Comfortable, lightweight off-the-face design Two-strap design with dual point attachment helps provide a secure fit Excellent fit, designed for smaller faces Adjustable nose clip reduces potential for eyewear fogging and helps ensure a secure seal and fit Durable collapse resistant inner shell Cushioning nose foam Soft inner materials and soft nose foam help provide a comfortable fit Specifications NIOSH approved N95 TC-84A-0007 Tested as per 42 CFR84 Applications Grinding Sanding Crushing Sawing Smoke Welding Fume Other dusty operations Dust Mist Caution WARNING! These respirators help reduce exposures to certain airborne contaminants Misuse may result in sickness or death Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging Do Not Use For: Gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or sandblasting Aerosol concentrations that exceed 10 times the OSHA PEL, or applicable government regulations, whichever is lower This respirator does not supply oxygen Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » Small Standard » NIOSH Application » Disposable Particulate Respirator -
3M Small N95 Disposable Particulate Respirator With VFlex Exhalation Valve
3M™ VFlex™ Small N95 Particulate Disposable Respirator has a unique folded design with 3M™ patented filter media and V-shaped pleats flex with mouth movement for easier talking. It features embossed front panel that helps the respirator retain its shape and adjustable nose clip for a custom fit. It has the flat fold design that allows for convenient storage prior to use. It is sold as 50 per box. Features Uniquely designed tabs for positioning the respirator on the face Adjustable nose clip to help provide a custom fit Embossed front panel to help the respirator retain its shape The V-shaped pleats flex with mouth movement for easier talking The flat fold design allows for convenient storage prior to use Specifications OSHA Hazard Communication Standard 29 CFR 1910.1200 Applications Grinding Sanding Sweeping Sawing Bagging Dry Chemical Handling Emergency Preparedness Laboratories Food Preparation Mineral Processing Agriculture General Maintenance Caution These respirators help reduce exposures to certain airborne particulates Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » Small Standard » OSHA Application » Disposable Particulate Respirator -
3M Standard N95 Disposable Particulate Respirator
3M™ Aura™ Particulate Respirator 9210+/37192(AAD), N95 Features N95 Approved filtering facepiece particulate respirator Designed to direct exhaled air away from the nose panel, helping reduce eyewear fogging Comfortable braided headbands help keep respirator securely in place and minimize pulling of hair Curved low profile design conforms well to nose and eye contours, allowing more room for eyewear Individual packaging and flat fold design provides convenient storage and portability Soft inner materials Compatible with a variety of eyewear Adjustable noseclip helps provide a custom secure seal Innovative chin tab designed for ease of positioning, donning and adjustment Specifications N95 Applications Grinding Sanding Sweeping Sawing Bagging or Processing Minerals Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » Standard Standard » NIOSH Application » Disposable Particulate Respirator -
3M Standard N95 Disposable Particulate Respirator With CoolFlow Exhalation Valve
3M™ Aura™ Particulate Respirator 9211+/37193(AAD), N95 Features N95 Approved filtering facepiece particulate respirator Designed to direct exhaled air away from the nose panel, helping reduce eyewear fogging 3M™ Cool Flow™ Valve keeps wearer cool Comfortable braided headbands help keep respirator securely in place and minimizes pulling of hair Curved low profile design conforms well to nose and eye contours, allowing more room for eyewear Individual packaging and flat fold design provides convenient storage and portability Soft inner materials Compatible with a variety of eyewear Adjustable noseclip helps provide a custom secure seal Specifications N95 Applications Grinding Sanding Sweeping Sawing Bagging or Processing Minerals Product Attributes Exhalation Valve » Yes Mask Type » N95 Respirator Size » Standard Standard » NIOSH Application » Disposable Particulate Respirator -
Moldex Low Profile N95 Disposable Particulate Respirator With Ventex Exhalation Valve
Moldex® N95 Low Profile Disposable Respirator has soft foam nose cushion that eliminates pressure points and Softspun® inner lining for comfort and durability. It allows mask to hang down around neck when not in use. Respirator comes with exclusive Handystrap® shell that resists collapsing in heat and humidity, Dura-Mesh® shell which protects filter media and Ventex® valve that lets the hot air out faster so breathing resistance is reduced. It is 100% PVC free that features adjustable cloth Handystrap® which feels cool and comfortable. It is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Respirator is sold as 10 per box. Features 100% PVC-Free® Ventex® valve lets the hot air out faster so workers breath easier and stay cooler Dura-Mesh® shell resists collapsing in heat and humidity HandyStrap® with buckle, allows mask to hang around the user's neck when not in use Cloth HandyStrap feels cool and comfortable Soft foam nose cushion for added comfort and no pressure points Softspun® lining for increased comfort and durability Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Hot humid and Dusty environments Welding Soldering and Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles Non-oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists Product Attributes Exhalation Valve » Yes Mask Type » N95 Respirator Size » Low Profile Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Medium Large N100 Disposable Particulate Respirator With Ventex Exhalation Valve
Moldex® N100 Medium. Large Disposable Respirator has a soft foam full cushion that eliminates pressure points for added comfort and Softspun® inner lining for durability. It comes with Handystrap® that allows mask to conveniently hang down around the neck, exclusive Ventex® valve that lets the hot air out faster so breathing resistance is reduced and Dura-Mesh® shell which protects filter media and resists collapse so the respirator holds its shape longer. Respirator is 100% PVC free and features adjustable cloth Handystrap® feels cool and comfortable. It meets heat and flame resistance in accordance with ANSI / ISEA 110-2003 Section 7.11.1 and NIOSH 42CFR84 standard. Respirator is 99.97% effective against non-oil based particulates and available in two sizes for most workers and OSHA compliance. It is applicable in environments where an OSHA substance specific standard applies as well as pharmaceutical manufacturing, battery manufacturing, welding, cutting and metal pouring. Respirator is sold as 20 per box. Features 100% PVC-Free® Ventex® valve lets the hot air out faster so workers breath easier and stay cooler Exclusive Dura-Mesh® shell resists collapsing in heat and humidity HandyStrap® with buckle, allows mask to hang down around the user's neck when not in use Adjustable cloth HandyStrap® feels cool and comfortable Soft foam face cushion for added comfort and no pressure points Softspun® lining for increased comfort and durability Benefits Hangs Loose: HandyStrap® allows mask to conveniently hang down around the user's neck so it’s always ready for use And during wear the adjustable cloth strap feels comfortable and cool against the skin Lasts Longer: The exclusive Dura-Mesh® shell protects the filter media so it stays cleaner looking longer. The shell also resists collapsing in hot, humid environments so the respirator holds its shape longer. The result is fewer respirators used and lower costs Vent Hot Air, Stay Cooler: Exclusive Ventex® valve lets the hot air out faster so breathing resistance is reduced and workers stay cooler Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Pharmaceutical manufacturing Battery manufacturing Welding Cutting Metal pouring In environments where an OSHA substance specific standard applies (lead, cadmium, arsenic, MDA) Non-Oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists Product Attributes Exhalation Valve » Yes Mask Type » N100 Respirator Size » Large » Medium » Medium/Large Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Medium Large N95 Disposable Particulate Respirator
Moldex® EZ-ON® N95 Medium. Large Particulate Disposable Respirator has patented FLEXWING™ design and is the first and only NIOSH N95 approved adjustable one strap respirator. It comes with Dura-Mesh® shell which protects filter media and resists collapse even in heat and humidity so the respirator holds its shape longer. Respirator is NIOSH certified to have filter efficiency level of 95% or greater against particulate aerosols free of oil and meets NIOSH 42CFR84 standard. It is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Respirator is sold as 10 per bag. Features 100% PVC-Free® Inner Dura-Mesh® shell resists collapsing in heat and humidity Outer Dura-Mesh® shell keeps filter media cleaner looking longer NIOSH certified to have a filter efficiency level of 95% or greater against particulate aerosols free of oil The first and only NIOSH N95 approved one adjustable cloth strap respirator Easy on, easy off one strap design for a quick fit One strap with Flexwing® and head harness provides an easier and more comfortable fit than two straps Cloth strap is adjustable for a cool, custom fit Soft foam nose cushion for added comfort Benefits Easy On, Easy Off: The first and only NIOSH N95 approved one adjustable cloth strap respirator gives you a quick fit. The one strap with Flexwing® and head harness provides an easier and more comfortable fit than two straps. The adjustable cloth strap is cool and comfortable against the skin Dura-Mesh® Shell Lasts Longer: Exclusive Dura-Mesh® shells resists collapsing, even in heat and humidity so the respirator holds its shape longer. The result is fewer respirators used and lower costs Vent Hot Air, Stay Cooler: Exclusive Ventex® valve lets the hot air out faster so breathing resistance is reduced and workers stay cooler Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 OSHA Applications Hot humid and Dusty environments Welding Soldering and Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles Non-oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death DO NOT USE AGAINST: Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » Large » Medium » Medium/Large Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Medium Large N95 Disposable Particulate Respirator Surgical Mask
Moldex™ N95 Medium. Large Particulate Disposable Respirator. Procedure Mask has a contour molded nose bridge with soft foam nose cushion for an easy and comfortable fit. The Dura-Mesh™ shell protects the filter media that resists collapsing in regular use and even under hot and humid conditions, so the respirator holds its shape longer. It is 100% PVC and latex-free that meets CDC guidelines for protection against TB and NIOSH certified to have filter efficiency level of 95% or greater against particulate aerosols free of oil. It features non latex straps, fluid-resistant and bacterial filter of efficiency greater than 99. 9%. It has passed ASTM F 1862 - 160 mm Hg and is applicable in surgery, hospitals and healthcare facilities, nurse or hospice care, correctional facilities, police, fire and rescue teams, EMS. EMT, homeless shelters, occupational health facilities, school healthcare offices. Respirator is sold as 20 per box. Features 100% PVC-Free™ Dura-Mesh™ shell resists collapsing in heat and humidity Contour molded nose bridge for extra comfort NIOSH certified to have a filter efficiency of 95% or greater against non-oil based particulates Both an N95 respirator and surgical mask (Latex Free) Softspun™ inner lining is soft to the touch Fluid resistant Bacterial filter efficiency >99. 9% Meets CDC guidelines for protection against TB Soft foam nose cushion for an easy and comfortable fit Benefits Easy Fit, More Comfort: The molded nose bridge with soft foam nose cushion provides the wearer an easy comfortable fit. There’s no metal noseband to adjust, and the seal is maintained without pressure points Last Longer: The Dura-Mesh® shell, exclusive to Moldex® protects the filter media from contaminated hand or glove contact. The shell resists collapsing, even in heat and humidity so the respirator holds its shape longer, increasing the life of the mask and comfort of the wearer Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7. 11. 1 Passed ASTM F 1862 at 160 mm Hg Meets CDC guidelines for protection against TB Bacterial filter efficiency >99. 9%. Applications Hospitals and Healthcare facilities Nurse/Hospice care Correctional facilities Police Fire and Rescue Teams EMS/EMT Homeless shelters Occupational health facilities Non-oil particulates Caution This product does not eliminate the risk of contracting any disease or infection Change immediately if the respirator comes in contact with blood or fluids, including body fluids Product has not been sold with warning or use instructions for personnel involved in industrial or related situations Non-latex straps are used in the headbands of these respirators. However, individuals highly sensitive to natural rubber latex may have an allergic reaction Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » Large » Medium » Medium/Large Standard » ANSI » ASTM » ISEA » NIOSH Application » Disposable Particulate Respirator » Surgical Mask -
Moldex Medium Large N95 Disposable Particulate Respirator With Ventex Exhalation Valve
Moldex® N95 Medium. Large Particulate Disposable Respirator has soft foam nose cushion that eliminates pressure points and Softspun® inner lining for comfort and durability. It allows mask to hang down around neck when not in use. Respirator comes with exclusive Handystrap® shell that resists collapsing in heat and humidity, Dura-Mesh® shell which protects filter media and Ventex® valve that lets the hot air out faster so breathing resistance is reduced. It is 100% PVC free that features adjustable cloth Handystrap® which feels cool and comfortable. It is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Respirator is sold as 10 per box. Features 100% PVC-Free® Ventex® valve lets the hot air out faster so workers breath easier and stay cooler Dura-Mesh® shell resists collapsing in heat and humidity HandyStrap® with buckle, allows mask to hang around the user's neck when not in use Cloth HandyStrap feels cool and comfortable Soft foam nose cushion for added comfort and no pressure points Softspun® lining for increased comfort and durability Benefits Hangs Loose: HandyStrap® allows mask to conveniently hang down around the user's neck so it’s always ready for use. Helps prevent premature disposal of the mask. And during wear the adjustable cloth strap feels comfortable and cool Dura-Mesh® Shell Lasts Longer: The exclusive Dura-Mesh® shell protects the filter media so it stays cleaner looking longer. The shell also resists collapsing in hot, humid environments so the respirator holds its shape longer. The result is fewer respirators used and lower costs Vent Hot Air, Stay Cooler: Exclusive Ventex® valve lets the hot air out faster so breathing resistance is reduced and workers stay cooler Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 OSHA Applications Hot humid and Dusty environments Welding Soldering and Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles Non-oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists Product Attributes Exhalation Valve » Yes Mask Type » N95 Respirator Size » Large » Medium » Medium/Large Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Medium Large N99 Disposable Particulate Respirator With Exhalation Valve
Moldex® N99 Medium. Large Disposable Respirator has molded nose bridge with soft foam nose cushion allowing all day comfort and Softspun® inner lining that adds comfort and durability. Respirator comes with exhalation valve that reduces hot air build up and Dura-Mesh® shell which protects filter media and resists collapse even in heat and humidity so the respirator holds its shape longer. Respirator is NIOSH certified to have a filter efficiency of 99% or greater against particulate aerosols free of oil and N99 certified for a higher level of protection. Respirator is 100% PVC free that features adjustable straps for a more comfortable fit and meets heat and flame resistance in accordance with ANSI / ISEA 110-2003 Section 7.11.1. Respirator includes a face piece which is naturally contoured without pressure points and straps that are securely attached so they don't break at the seal. The result of using the mask is fewer respirators used and lowers costs. It is applicable in welding, soldering, brazing, torch cutting, metal pouring and dusty environments. Respirator is sold as 10 per box. Features 100% PVC-Free® Exhale valve lets workers breathe easy and stay cool Exclusive Dura-Mesh® shell resists collapsing in heat and humidity Contoured nose bridge with soft foam nose cushion allows all-day comfort Face piece is naturally contoured without pressure points Soft foam nose seal for a comfortable fit Softspun® inner lining adds comfort and durability Adjustable cloth straps assure a snug, comfortable fit Can be used against most welding fumes free of oil Benefits Adjustable Comfort: Adjustable cloth straps allow for a more comfortable fit with a simple tug on the straps. Molded nose bridge with soft foam nose seal fits easily and comfortably without a metal noseband. Exhale valve reduces breathing resistance and hot air buildup. Keeps workers cooler longer Last Longer, Use Fewer: The Dura-Mesh® shell protects the filter media so it stays cleaner looking longer. Plus, it resists collapsing, even in heat and humidity so the respirator holds its shape longer. The result is fewer respirators used and lower costs. Meets heat and flame resistance in accordance with ANSI/ISEA 110-2003 Section 7.11.1 Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Welding Soldering Brazing Torch cutting Metal pouring and Dusty environments Polishing Buffing Lime Poultry and Textiles Non-oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists Product Attributes Exhalation Valve » Yes Mask Type » N99 Respirator Size » Large » Medium » Medium/Large Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Medium Large P100 Disposable Particulate Respirator With Ventex Exhalation Valve
Moldex® P100 Medium. Large Particulate Disposable Respirator features a soft foam full cushion that eliminates pressure points for all day comfort with adjustable straps for a more comfortable fit. Respirator is 100% PVC free that comes with exhalation valve and Dura-Mesh® shell which protects filter media and resists collapse even in heat and humidity so the respirator holds its shape longer. The Ventex® valve lets the hot air out faster so workers breathe easier and stay cooler and the contour molded nose bridge that seals easily and comfortably without the user having to pinch a metal noseband. Respirator is 99.97% efficient against oil and non-oil based particulates making it ideal in environments where an OSHA substance specific standard applies as well as for pharmaceutical manufacturing, conventional and nuclear power generation, welding, cutting and metal pouring applications. Respirator is sold as 5 per bag. Features 100% PVC-Free® Ventex® valve lets the hot air out faster so workers breath easier and stay cooler Dura-Mesh® shell resists collapsing in heat and humidity Contour molded nose bridge seals without a metal noseband 99.97% efficient against oil and non-oil based particulates Adjustable cloth straps assure a snug, cool and comfortable fit Soft foam full cushion eliminates pressure points for added comfort Benefits Easy Fit, More Comfort: The molded nose bridge with soft foam nose cushion provides the wearer an easy, comfortable fit. There’s no metal noseband to adjust and the seal is maintained without pressure points All Day Comfort: Molded nose bridge with foam face cushion fits easily and comfortably without a metal noseband. Exclusive Ventex® valve lets the hot air out faster so breathing resistance is reduced and workers stay cooler. Adjustable cloth straps allow a comfortable fit with a simple tug on the straps Lasts Longer: The exclusive Dura-Mesh® shell protects the filter media so it stays cleaner looking longer. The shell also resists collapsing in hot, humid environments so the respirator holds its shape longer. The result is fewer respirators used and lower costs Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Pharmaceutical manufacturing Conventional and Nuclear Power Generation Welding Cutting Metal pouring For oil and non-oil based particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists for longer than one 8 hour work shift Product Attributes Exhalation Valve » Yes Mask Type » P100 Respirator Size » Large » Medium » Medium/Large Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Medium Large P95 Disposable Particulate Respirator
The unique FlexFit®design moves with your face for comfort all day long. The exclusive cool and comfortable SmartStrap allows you to adjust the mask for a custom fit. It has a soft foam face cushion for no pressure points. More comfort means more compliance. The SmartStrap also allows the respirator to hang around the neck when not in use. The Dura-Mesh®shell prevents collapsing from heat and humidity so your mask lasts longer. Longer use means less waste and lower costs. Plus it's also metal free. Features Exclusive easy-breathing wave design 95% efficient against oil and non-oil based particulates FlexFit design moves easily with your face and stays in place Dura-Mesh®shell resists collapsing in heat and humidity Soft, cloth SmartStrap®is both HANGABLE and ADJUSTABLE Foam face cushion for added comfort and no pressure points Meets heat and flame resistance in accordance with ANSI/ISEA 110-2003 Metal-free 100% PVC-Free. Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Welding soldering and brazing cutting and metal pouring grinding sanding sweeping bagging stone quarrying metal machining cement underground mining polishing buffing lime poultry textiles pharmaceutical manufacturing petrochemical manufacturing dry chemical handling conventional and nuclear power generation paper processing For Oil and Non-Oil based particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based particulate aerosols for longer than 8 hours after first use Product Attributes Exhalation Valve » No Mask Type » P95 Respirator Size » Large » Medium Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Medium Large R95 Disposable Particulate Respirator With Exhalation Valve
Moldex® Special Ops™ R95 Medium. Large Particulate Disposable Respirator with added carbon layer to help filter out nuisance levels of ozone or organic vapor odors. It comes with Handystrap® that allows mask to conveniently hang down around the neck, exclusive Ventex® valve that lets the hot air out faster so breathing resistance is reduced and Dura-Mesh® shell which protects filter media and resists collapse so the respirator holds its shape longer. It meets heat and flame resistance in accordance with ANSI / ISEA 110-2003 Section 7.11.1 and NIOSH 42CFR84 standard. It is 100% PVC free and features R95 protection against both oil and non-oil based particulate aerosols and solid black color that stays cleaner looking longer for preventing premature disposal. It is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Welding and foundry operations, lab settings, agriculture, chemical processing, printing, food processing, paint and varnish manufacturing, waste processing and sewage treatment. Respirator is sold 10 per box. Features 100% PVC-Free® Ventex® valve lets the hot air out faster so workers breath easier and stay cooler Exclusive Dura-Mesh® shell resists collapsing in heat and humidity HandyStrap® with buckle, allows mask to hang around the user's neck when not in use R95 protection against both oil and non-oil based particulate aerosols Soft foam nose cushion for added comfort and no pressure points Softspun® lining for increased comfort and durability Added carbon layer helps filter out nuisance levels of ozone/organic vapors Solid black color stays cleaner looking longer to preventing premature disposal Benefits Hangs Loose: HandyStrap® allows mask to conveniently hang down around the user's neck so it’s always ready for use. And during wear the adjustable cloth strap is more comfortable and cooler Dura-Mesh® Shell Lasts Longer: Exclusive Dura-Mesh® shell protects the filter media so it stays cleaner looking longer. Plus it resists collapsing, even in heat and humidity so the respirator holds its shape longer. The result is fewer respirators used and lower costs Vent Hot Air, Stay Cooler: Exclusive Ventex® valve lets the hot air out faster so breathing resistance is reduced and workers stay cooler Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Hot humid and Dusty environments Welding Soldering Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles Foundry Operations Lab settings and Agriculture Chemical processing Printing Food Processing Paint and Varnish manufacturing Waste processing Sewage Treatment For Oil and Non-Oil based particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based particulate aerosols for longer than 8 hours after first use Product Attributes Exhalation Valve » Yes Mask Type » R95 Respirator Size » Large » Medium » Medium/Large Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Medium Large R95 Disposable Particulate Respirator With Ventex Exhalation Valve
Moldex® R95 Medium. Large Particulate Disposable Respirator has soft foam full cushion eliminates pressure points for added comfort with added sorbent that helps to filter out nuisance levels of acid gas irritants. It comes with Handystrap® that allows mask to conveniently hang down around the neck, exclusive Ventex® valve that lets the hot air out faster so breathing resistance is reduced and Dura-Mesh® shell which protects filter media and resists collapse so the respirator holds its shape longer. It meets heat and flame resistance in accordance with ANSI / ISEA 110-2003 Section 7.11.1 and NIOSH 42CFR84 standard. Respirator is 100% PVC free and features R95 protection against both oil and non-oil based particulate aerosols. It is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Respirator finds applications in aluminum, copper, zinc, brass, bronze smelters, glass etching, paper mills, breweries, fertilizer production, ceramic and clay processing and chemical processing. Respirator is sold as 10 per box. Features 100% PVC-Free® Ventex® valve lets the hot air out faster so workers breath easier and stay cooler Exclusive Dura-Mesh® shell resists collapsing in heat and humidity HandyStrap® with buckle, allows mask to hang around the user's neck when not in use R95 protection against both oil and non-oil based particulate aerosols Soft foam nose cushion for added comfort and no pressure points Softspun® lining for increased comfort and durability Added sorbent helps filter out nuisance levels of acid gas irritants Benefits Hangs Loose: HandyStrap® allows mask to conveniently hang down around the user's neck so it’s always ready for use. And during wear the adjustable cloth strap is more comfortable and cooler Dura-Mesh® Shell Lasts Longer: Exclusive Dura-Mesh® shell protects the filter media so it stays cleaner looking longer. Plus it resists collapsing, even in heat and humidity so the respirator holds its shape longer. The result is fewer respirators used and lower costs Vent Hot Air, Stay Cooler: Exclusive Ventex® valve lets the hot air out faster so breathing resistance is reduced and workers stay cooler Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Hot humid and Dusty environments Welding Soldering Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles Aluminum Copper Zinc and Brass Bronze Smelters Glass etching Paper mills Breweries Fertilizer Production Ceramic and Clay Processing Chemical processing For Oil and Non-Oil based particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based particulate aerosols for longer than 8 hours after first use Product Attributes Exhalation Valve » Yes Mask Type » R95 Respirator Size » Large » Medium » Medium/Large Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex N95 Disposable Particulate Respirator
Moldex® Low Profile N95 Particulate Disposable Respirator. Procedure Mask has a molded nose bridge with soft foam nose cushion for an easy and comfortable fit. Mask is 100% PVC free that meets heat and flame resistance in accordance with ANSI / ISEA 110-2003 Section 7.11.1 and NIOSH 42CFR84 standard. The Dura-Mesh® shell protects the filter media that resists collapsing in regular use and even under hot and humid conditions, so the respirator holds its shape longer. Mask features contour molded nose bridge seals without a metal noseband and Softspun® inner lining that adds comfort and durability. The result of using the mask is fewer respirators used and lowers costs. Mask has no metal noseband to adjust and the seal is maintained without pressure points. Mask includes straps which are securely attached so they don't break at the seal and face piece is naturally contoured without pressure points. Mask is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Mask is sold as 20 per box. Features 100% PVC-Free® Dura-Mesh® shell resists collapsing in heat and humidity Molded nose bridge seals easily without a metal noseband Straps are securely attached so they don't break at the seal Softspun® lining for increased comfort and durability Available in three sizes to fit more workers and increase OSHA compliance Face piece is naturally contoured without pressure points Soft foam nose cushion for an easy and comfortable fit Benefits Easy Fit, More Comfort: The molded nose bridge with soft foam nose cushion provides the wearer an easy comfortable fit. There’s no metal noseband to adjust and the seal is maintained without pressure points Last Longer, Use Fewer: The Dura-Mesh® shell, exclusive to Moldex®, protects the filter media so it stays cleaner-looking longer. The shell resists collapsing, even in heat and humidity so the respirator holds its shape longer. The result is fewer respirators used and lower costs Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Hot humid and Dusty environments Welding Soldering and Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles Non-oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » One Size Fits Most Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex N95 Disposable Particulate Respirator Surgical Mask
Moldex® N95 Disposable Particulate Respirator And Surgical Mask has low profile molded nose bridge with soft foam nose cushion for an easy and comfortable fit. The Dura-Mesh® shell prevents filter media contact by contaminated gloves or hands that resist collapsing in regular use and even under hot and humid conditions, so the respirator holds its shape longer. The result of using the mask is fewer respirators used and lowers costs. Mask has no metal noseband to adjust and the seal is maintained without pressure points. Mask is applicable in hospitals and healthcare facilities, nurse or hospice care, correctional facilities, police, fire and rescue teams, EMS or EMT, homeless shelters, occupational health facilities, school healthcare offices. Mask is sold as 20 per box. Features 100% PVC-Free® Dura-Mesh® shell resists collapsing in regular use and even under hot and humid conditions Contour molded nose bridge for extra comfort NIOSH certified to have a filter efficiency of 95% or greater against non-oil based particulates Latex Free Soft foam nose cushion for an easy and comfortable fit Softspun® inner lining is soft to the touch Fluid resistant Bacterial filter efficiency >999% Highest ASTM level of fluid resistance on the market (160 mm Hg) Benefits Easy Fit, More Comfort And Dependable: The molded nose bridge with soft foam nose cushion provides the wearer an easy, comfortable, dependable fit. There’s no metal noseband to adjust and the seal is maintained without pressure points Last Longer, Use Fewer: The Dura-Mesh® shell, exclusive to Moldex®, prevents filter media contact by contaminated gloves or hands. The shell resists collapsing, even in heat and humidity, so the respirator holds its shape longer. The result is fewer respirators used and lower costs Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Passed ASTM F 1862 at 160 mm Hg Meets CDC guidelines for protection against TB Bacterial filter efficiency >99.9%. Applications Hospitals and Healthcare facilities Nurse/Hospice care Police Fire and Rescue teams EMS/EMT Homeless shelters Occupational health facilities School healthcare offices Caution This product does not eliminate the risk of contracting any disease or infection Change immediately if the respirator comes in contact with blood or fluids, including body fluids Product has not been sold with warning or use instructions for personnel involved in industrial or related situations Non-latex straps are used in the headbands of these respirators. However, individuals highly sensitive to natural rubber latex may have an allergic reaction Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » One Size Fits Most Standard » ANSI » ASTM » ISEA » NIOSH Application » Disposable Particulate Respirator » Surgical Mask -
Moldex N95 Disposable Particulate Respirator With Exhalation Valve
Moldex® N95 Medium. Large Particulate Disposable Respirator has low profile molded nose bridge with soft foam nose cushion provides the wearer an easy and comfortable fit. It comes with exhale valve that reduces hot air build up and Dura-Mesh® shell which protects filter media and resists collapse so the respirator holds its shape longer. It features Softspun® inner liner and meets heat and flame resistance in accordance with ANSI / ISEA 110-2003 Section 7.11.1. It is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Respirator is sold as 10 per box. For areas with oils present, use an R or P respirator. Features 100% PVC-Free® Exhale valve lets workers breathe easy and stay cool Exclusive Dura-Mesh® shell resists collapsing in heat and humidity Molded nose bridge seals easily and comfortably without a metal noseband Face piece is naturally contoured without pressure points Soft, foam nose cushion for added comfort Softspun® lining for increased comfort and durability Benefits Easy Fit, More Comfort: The molded nose bridge with soft foam nose cushion provides the wearer an easy, comfortable fit. There’s no metal noseband to adjust and the seal is maintained without pressure points Stay Cool On The Job: Workers stay cooler with an exhale valve that reduces hot air build up. There’s less breathing resistance and workers don’t have to break midshift to cool off Last Longer, Use Fewer: The exclusive Dura-Mesh® shell protects the filter media so it stays cleaner-looking longer. The shell resists collapsing, even in heat and humidity so the respirator holds its shape longer The result is fewer respirators used and lower costs Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Hot humid and Dusty environments Welding Soldering and Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles Non-oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists Product Attributes Exhalation Valve » Yes Mask Type » N95 Respirator Size » One Size Fits Most Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Small N100 Disposable Particulate Respirator With Ventex Exhalation Valve
Moldex® N100 Small Disposable Respirator has a soft foam full cushion that eliminates pressure points for added comfort and Softspun® inner lining for durability. It comes with Handystrap® that allows mask to conveniently hang down around the neck, exclusive Ventex® valve that lets the hot air out faster so breathing resistance is reduced and Dura-Mesh® shell which protects filter media and resists collapse so the respirator holds its shape longer. Respirator is 100% PVC free and features adjustable cloth Handystrap® feels cool and comfortable. It meets heat and flame resistance in accordance with ANSI / ISEA 110-2003 Section 7.11.1 and NIOSH 42CFR84 standard. Respirator is 99.97% effective against non-oil based particulates and available in two sizes for most workers and OSHA compliance. It is applicable in environments where an OSHA substance specific standard applies as well as pharmaceutical manufacturing, battery manufacturing, welding, cutting and metal pouring. Respirator is sold as 5 per box. Features 100% PVC-Free® Ventex® valve lets the hot air out faster so workers breath easier and stay cooler Exclusive Dura-Mesh® shell resists collapsing in heat and humidity HandyStrap® with buckle, allows mask to hang down around the user's neck when not in use Adjustable cloth HandyStrap® feels cool and comfortable Soft foam face cushion for added comfort and no pressure points Softspun® lining for increased comfort and durability Benefits Hangs Loose: HandyStrap® allows mask to conveniently hang down around the user's neck so it’s always ready for use And during wear the adjustable cloth strap feels comfortable and cool against the skin Lasts Longer: The exclusive Dura-Mesh® shell protects the filter media so it stays cleaner looking longer. The shell also resists collapsing in hot, humid environments so the respirator holds its shape longer. The result is fewer respirators used and lower costs Vent Hot Air, Stay Cooler: Exclusive Ventex® valve lets the hot air out faster so breathing resistance is reduced and workers stay cooler Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Pharmaceutical manufacturing Battery manufacturing Welding Cutting Metal pouring In environments where an OSHA substance specific standard applies (lead, cadmium, arsenic, MDA) Non-Oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists Product Attributes Exhalation Valve » Yes Mask Type » N100 Respirator Size » Small Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Small N95 Disposable Particulate Respirator
Moldex® N95 Small Particulate Disposable Respirator. Procedure Mask has a molded nose bridge with soft foam nose cushion for an easy and comfortable fit. Mask is 100% PVC free that meets heat and flame resistance in accordance with ANSI / ISEA 110-2003 Section 7.11.1 and NIOSH 42CFR84 standard. The Dura-Mesh® shell protects the filter media that resists collapsing in regular use and even under hot and humid conditions, so the respirator holds its shape longer. Mask features contour molded nose bridge seals without a metal noseband and Softspun® inner lining that adds comfort and durability. The result of using the mask is fewer respirators used and lowers costs. Mask has no metal noseband to adjust and the seal is maintained without pressure points. Mask includes straps which are securely attached so they don't break at the seal and face piece is naturally contoured without pressure points. Mask is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Mask is sold as 20 per box. Features 100% PVC-Free® Dura-Mesh® shell resists collapsing in heat and humidity Molded nose bridge seals easily without a metal noseband Straps are securely attached so they don't break at the seal Softspun® lining for increased comfort and durability Available in three sizes to fit more workers and increase OSHA compliance Face piece is naturally contoured without pressure points Soft foam nose cushion for an easy and comfortable fit Benefits Easy Fit, More Comfort: The molded nose bridge with soft foam nose cushion provides the wearer an easy comfortable fit. There’s no metal noseband to adjust and the seal is maintained without pressure points Last Longer, Use Fewer: The Dura-Mesh® shell, exclusive to Moldex®, protects the filter media so it stays cleaner-looking longer. The shell resists collapsing, even in heat and humidity so the respirator holds its shape longer. The result is fewer respirators used and lower costs Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Hot humid and Dusty environments Welding Soldering and Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles Non-oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » Small Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Small N95 Disposable Particulate Respirator Surgical Mask
Moldex® N95 Small Particulate Disposable Respirator. Procedure Mask has contour molded nose bridge with soft foam nose cushion for an easy and comfortable fit. It comes with Dura-Mesh® shell which protects the filter media and resists collapsing in regular use and even under hot and humid conditions, so the respirator holds its shape longer. It is 100% PVC and latex-free that meets CDC guidelines for protection against TB and NIOSH 42CFR84 standard. Respirator is NIOSH certified to have filter efficiency level of 95% or greater against particulate aerosols free of oil. It features fluid-resistant and bacterial filter of efficiency greater than 99.9%. It is applicable in surgery, hospitals and healthcare facilities, nurse. hospice care, correctional facilities, police, fire and rescue teams, EMS. EMT, homeless shelters, occupational health facilities, school healthcare offices. Respirator is sold as 20 per box. Features 100% PVC-Free® Dura-Mesh® shell resists collapsing in heat and humidity Contour molded nose bridge for extra comfort NIOSH certified to have a filter efficiency of 95% or greater against non-oil based particulates Both an N95 respirator and surgical mask (Latex Free) Softspun® inner lining is soft to the touch Fluid resistant Bacterial filter efficiency >99.9% Meets CDC guidelines for protection against TB Soft foam nose cushion for an easy and comfortable fit Benefits Easy Fit, More Comfort: The molded nose bridge with soft foam nose cushion provides the wearer an easy comfortable fit. There’s no metal noseband to adjust, and the seal is maintained without pressure points Last Longer: The Dura-Mesh® shell, exclusive to Moldex® protects the filter media from contaminated hand or glove contact. The shell resists collapsing, even in heat and humidity so the respirator holds its shape longer, increasing the life of the mask and comfort of the wearer Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Passed ASTM F 1862 at 160 mm Hg Meets CDC guidelines for protection against TB Bacterial filter efficiency >99.9%. Applications Hospitals and Healthcare facilities Nurse/Hospice care Correctional facilities Police Fire and Rescue Teams EMS/EMT Homeless shelters Occupational health facilities Non-oil particulates Caution This product does not eliminate the risk of contracting any disease or infection Change immediately if the respirator comes in contact with blood or fluids, including body fluids Product has not been sold with warning or use instructions for personnel involved in industrial or related situations Non-latex straps are used in the headbands of these respirators. However, individuals highly sensitive to natural rubber latex may have an allergic reaction Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » Small Standard » ANSI » ASTM » ISEA » NIOSH Application » Disposable Particulate Respirator » Surgical Mask -
Moldex Small N95 Disposable Particulate Respirator With Exhalation Valve
Moldex® N95 Small Particulate Disposable Respirator has molded nose bridge with soft foam nose cushion provides the wearer an easy and comfortable fit. It comes with exhale valve that reduces hot air build up and Dura-Mesh® shell which protects filter media and resists collapse so the respirator holds its shape longer. It features Softspun® inner liner and meets heat and flame resistance in accordance with ANSI / ISEA 110-2003 Section 7.11.1. It is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Respirator is sold as 10 per box. For areas with oils present, use an R or P respirator. Features 100% PVC-Free® Exhale valve lets workers breathe easy and stay cool Exclusive Dura-Mesh® shell resists collapsing in heat and humidity Molded nose bridge seals easily and comfortably without a metal noseband Face piece is naturally contoured without pressure points Soft, foam nose cushion for added comfort Softspun® lining for increased comfort and durability Benefits Easy Fit, More Comfort: The molded nose bridge with soft foam nose cushion provides the wearer an easy, comfortable fit. There’s no metal noseband to adjust and the seal is maintained without pressure points Stay Cool On The Job: Workers stay cooler with an exhale valve that reduces hot air build up. There’s less breathing resistance and workers don’t have to break midshift to cool off Last Longer, Use Fewer: The exclusive Dura-Mesh® shell protects the filter media so it stays cleaner-looking longer. The shell resists collapsing, even in heat and humidity so the respirator holds its shape longer The result is fewer respirators used and lower costs Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Hot humid and Dusty environments Welding Soldering and Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles Non-oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists Product Attributes Exhalation Valve » Yes Mask Type » N95 Respirator Size » Small Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Small N95 Disposable Particulate Respirator With Ventex Exhalation Valve
Moldex® N95 Small Particulate Disposable Respirator has soft foam nose cushion that eliminates pressure points and Softspun® inner lining for comfort and durability. It allows mask to hang down around neck when not in use. Respirator comes with exclusive Handystrap® shell that resists collapsing in heat and humidity, Dura-Mesh® shell which protects filter media and Ventex® valve that lets the hot air out faster so breathing resistance is reduced. It is 100% PVC free that features adjustable cloth Handystrap® which feels cool and comfortable. It is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Respirator is sold as 10 per box. Features 100% PVC-Free® Ventex® valve lets the hot air out faster so workers breath easier and stay cooler Dura-Mesh® shell resists collapsing in heat and humidity HandyStrap® with buckle, allows mask to hang around the user's neck when not in use Cloth HandyStrap feels cool and comfortable Soft foam nose cushion for added comfort and no pressure points Softspun® lining for increased comfort and durability Benefits Hangs Loose: HandyStrap® allows mask to conveniently hang down around the user's neck so it’s always ready for use. Helps prevent premature disposal of the mask. And during wear the adjustable cloth strap feels comfortable and cool Dura-Mesh® Shell Lasts Longer: The exclusive Dura-Mesh® shell protects the filter media so it stays cleaner looking longer. The shell also resists collapsing in hot, humid environments so the respirator holds its shape longer. The result is fewer respirators used and lower costs Vent Hot Air, Stay Cooler: Exclusive Ventex® valve lets the hot air out faster so breathing resistance is reduced and workers stay cooler Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 OSHA Applications Hot humid and Dusty environments Welding Soldering and Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles Non-oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based mists Product Attributes Exhalation Valve » Yes Mask Type » N95 Respirator Size » Small Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Small R95 Disposable Particulate Respirator With Exhalation Valve
Moldex® Special Ops™ R95 Small Particulate Disposable Respirator comes with Handystrap® that allows mask to conveniently hang down around the neck, exclusive Ventex® valve that lets the hot air out faster so breathing resistance is reduced and Dura-Mesh® shell which protects filter media and resists collapse so the respirator holds its shape longer. Respirator is 100% PVC free and is NIOSH certified under 42CFR84 regulations to have a filter efficiency level of 95% or greater against oil and non-oil based particulate aerosols up to 10x PEL. It meets heat and flame resistance in accordance with ANSI / ISEA 110-2003 Section 7.11.1. It features solid black color that stays cleaner looking longer for preventing premature disposal and R95 protection against both oil and non-oil based particulate aerosols. It is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Respirator is sold as 10 per box. Features 100% PVC-Free® Ventex® valve lets the hot air out faster so workers breath easier and stay cooler Exclusive Dura-Mesh® shell resists collapsing in heat and humidity HandyStrap® with buckle, allows mask to hang around the user's neck when not in use R95 protection against both oil and non-oil based particulate aerosols Soft foam nose cushion for added comfort and no pressure points Softspun® lining for increased comfort and durability Solid black color stays cleaner looking longer to preventing premature disposal Benefits Hangs Loose: HandyStrap® allows mask to conveniently hang down around the user's neck so it’s always ready for use. And during wear the adjustable cloth strap is more comfortable and cooler Dura-Mesh® Shell Lasts Longer: Exclusive Dura-Mesh® shell protects the filter media so it stays cleaner looking longer. Plus it resists collapsing, even in heat and humidity so the respirator holds its shape longer. The result is fewer respirators used and lower costs Vent Hot Air, Stay Cooler: Exclusive Ventex® valve lets the hot air out faster so breathing resistance is reduced and workers stay cooler Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Hot humid and Dusty environments Welding Soldering and Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles For Oil and Non-Oil based particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based particulate aerosols for longer than 8 hours after first use Product Attributes Exhalation Valve » Yes Mask Type » R95 Respirator Size » Small Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex Small R95 Disposable Particulate Respirator With Ventex Exhalation Valve
Moldex® R95 Small Particulate Disposable Respirator has a soft foam full cushion that eliminates pressure points for comfort with added carbon layer to help filter out nuisance levels of ozone or organic vapor odors. It comes with Handystrap® that allows mask to conveniently hang down around the neck, exclusive Ventex® valve that lets the hot air out faster so breathing resistance is reduced and Dura-Mesh® shell which protects filter media and resists collapse so the respirator holds its shape longer. It meets heat and flame resistance in accordance with ANSI / ISEA 110-2003 Section 7.11.1 and NIOSH 42CFR84 standard. Respirator is 100% PVC free and features R95 protection against both oil and non-oil based particulate aerosols. It is applicable in hot, humid and dusty environments such as welding, soldering and brazing, grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles. Welding and foundry operations, lab settings, agriculture, chemical processing, printing, food processing, paint and varnish manufacturing, waste processing and sewage treatment. Respirator is sold as 10 per box. Features 100% PVC-Free® Ventex® valve lets the hot air out faster so workers breath easier and stay cooler Exclusive Dura-Mesh® shell resists collapsing in heat and humidity HandyStrap® with buckle, allows mask to hang around the user's neck when not in use R95 protection against both oil and non-oil based particulate aerosols Soft foam nose cushion for added comfort and no pressure points Softspun® lining for increased comfort and durability Added carbon layer helps filter out nuisance levels of ozone/organic vapors Benefits Hangs Loose: HandyStrap® allows mask to conveniently hang down around the user's neck so it’s always ready for use. And during wear the adjustable cloth strap is more comfortable and cooler Dura-Mesh® Shell Lasts Longer: Exclusive Dura-Mesh® shell protects the filter media so it stays cleaner looking longer. Plus it resists collapsing, even in heat and humidity so the respirator holds its shape longer. The result is fewer respirators used and lower costs Vent Hot Air, Stay Cooler: Exclusive Ventex® valve lets the hot air out faster so breathing resistance is reduced and workers stay cooler Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Applications Hot humid and Dusty environments Welding Soldering Brazing Grinding Sanding Sweeping Bagging Stone quarrying Metal machining Cement Underground mining Polishing Buffing Lime Poultry and Textiles Foundry Operations Lab settings and Agriculture Chemical processing Printing Food Processing Paint and Varnish manufacturing Waste processing Sewage Treatment Non-Oil particulates Oil particulates Caution The particulates and other contaminants which can be dangerous to your health include those which you cannot see, taste, or smell This product has not been sold with warnings or use instructions for personnel involved in health care or related situation Before use, the user must first be trained by the employer in proper respirator use, in accordance with applicable safety and health standards, for the contaminant and exposure level in the assigned work area Failure to do so will reduce respirator effectiveness, wearer protection, and may result in sickness or death Do Not Use Against Concentrations of contaminants which are unknown or are immediately dangerous to life or health Do Not Use Against Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is lower Do Not Use Against Gases, vapors, asbestos, paint spray, sandblasting or particulate materials which generate harmful vapors Do Not Use Against Oil-based particulate aerosols for longer than 8 hours after first use Product Attributes Exhalation Valve » Yes Mask Type » R95 Respirator Size » Small Standard » ANSI » ISEA » NIOSH Application » Disposable Particulate Respirator -
Moldex X-Small N95 Disposable Particulate Respirator Surgical Mask
Moldex® N95 X-Small Particulate Disposable Respirator. Procedure Mask has contour molded nose bridge with soft foam nose cushion for an easy and comfortable fit. It comes with Dura-Mesh® shell which protects the filter media and resists collapsing in regular use and even under hot and humid conditions, so the respirator holds its shape longer. It is 100% PVC and latex-free that meets CDC guidelines for protection against TB and NIOSH 42CFR84 standard. Respirator is NIOSH certified to have filter efficiency level of 95% or greater against particulate aerosols free of oil. It features fluid-resistant and bacterial filter of efficiency greater than 99.9%. It is applicable in surgery, hospitals and healthcare facilities, nurse. hospice care, correctional facilities, police, fire and rescue teams, EMS. EMT, homeless shelters, occupational health facilities, school healthcare offices. Respirator is sold as 20 per box. Features 100% PVC-Free® Dura-Mesh® shell resists collapsing in heat and humidity Contour molded nose bridge for extra comfort NIOSH certified to have a filter efficiency of 95% or greater against non-oil based particulates Both an N95 respirator and surgical mask (Latex Free) Softspun® inner lining is soft to the touch Fluid resistant Bacterial filter efficiency >99.9% Meets CDC guidelines for protection against TB Soft foam nose cushion for an easy and comfortable fit Benefits Easy Fit, More Comfort: The molded nose bridge with soft foam nose cushion provides the wearer an easy comfortable fit. There’s no metal noseband to adjust, and the seal is maintained without pressure points Last Longer: The Dura-Mesh® shell, exclusive to Moldex® protects the filter media from contaminated hand or glove contact. The shell resists collapsing, even in heat and humidity so the respirator holds its shape longer, increasing the life of the mask and comfort of the wearer Specifications Meets NIOSH 42 CFR84 Standard ANSI/ISEA 110-2003 Section 7.11.1 Passed ASTM F 1862 at 160 mm Hg Meets CDC guidelines for protection against TB Bacterial filter efficiency >99.9%. Applications Hospitals and Healthcare facilities Nurse/Hospice care Correctional facilities Police Fire and Rescue Teams EMS/EMT Homeless shelters Occupational health facilities Non-oil particulates Caution This product does not eliminate the risk of contracting any disease or infection Change immediately if the respirator comes in contact with blood or fluids, including body fluids Product has not been sold with warning or use instructions for personnel involved in industrial or related situations Non-latex straps are used in the headbands of these respirators. However, individuals highly sensitive to natural rubber latex may have an allergic reaction Product Attributes Exhalation Valve » No Mask Type » N95 Respirator Size » X-Small Standard » ANSI » ASTM » ISEA » NIOSH Application » Disposable Particulate Respirator » Surgical Mask -
Radnor N95 Flame Resistant Particulate Disposable Respirator With Exhalation Valve And Adjustable Nose Clip NIOSH 42CFR84 10 Each Per Box
Radnor® N95 Disposable Particulate Respirators come in three different styles to meet your respiratory needs. The Radnor® N95 disposable respirator is the standard respirator which can be used in most applications where the removal of airborne particulate is a must. For added breathability and comfort, use the Radnor N95 disposable respirator with exhalation valve. Use the Radnor® N95 disposable flame resistant respirator with exhalation valve to protect against containments when welding and when oil aerosols are not present. Whatever your needs are, you’ll be able to find the right Radnor® mask for your application. All Radnor® N95 respirators are NIOSH 42CFR84 approved. Features Adjustable nose clip Latex-free Soft nose foam Patented filter media Exhalation valve for cooler and easier breathing Flame-resistant material Specifications NIOSH 42CFR84 approved Product Attributes Exhalation Valve » Yes Mask Type » N95 Particulate Respirator Size » One Size Fits Most Standard » NIOSH 42CFR84 -
Radnor N95 Particulate Disposable Respirator With Adjustable Nose Clip NIOSH 42CFR84 20 Each Per Box
Radnor® N95 Disposable Particulate Respirators come in three different styles to meet your respiratory needs. The Radnor® N95 disposable respirator is the standard respirator which can be used in most applications where the removal of airborne particulate is a must. For added breathability and comfort, use the Radnor N95 disposable respirator with exhalation valve. Use the Radnor® N95 disposable flame resistant respirator with exhalation valve to protect against containments when welding and when oil aerosols are not present. Whatever your needs are, you’ll be able to find the right Radnor® mask for your application. All Radnor® N95 respirators are NIOSH 42CFR84 approved. Features Adjustable nose clip Latex-free Soft nose foam Patented filter media Specifications NIOSH 42CFR84 approved Product Attributes Exhalation Valve » No Mask Type » N95 Particulate Respirator Size » One Size Fits Most Standard » NIOSH 42CFR84 -
Radnor N95 Particulate Disposable Respirator With Exhalation Valve And Adjustable Nose Clip NIOSH 42CFR84 10 Each Per Box
Radnor® N95 Disposable Particulate Respirators come in three different styles to meet your respiratory needs. The Radnor® N95 disposable respirator is the standard respirator which can be used in most applications where the removal of airborne particulate is a must. For added breathability and comfort, use the Radnor N95 disposable respirator with exhalation valve. Use the Radnor® N95 disposable flame resistant respirator with exhalation valve to protect against containments when welding and when oil aerosols are not present. Whatever your needs are, you’ll be able to find the right Radnor® mask for your application. All Radnor® N95 respirators are NIOSH 42CFR84 approved. Features Adjustable nose clip Latex-free Soft nose foam Patented filter media Exhalation valve for cooler and easier breathing Specifications NIOSH 42CFR84 approved Product Attributes Exhalation Valve » Yes Mask Type » N95 Particulate Respirator Size » One Size Fits Most Standard » NIOSH 42CFR84