Texsteam

P62-037000-4200 is a Texsteam hardware and fastener component used in the assembly and maintenance of chemical injection pump systems in the 1200, 3700, 4300, 5000, and 5100 Series. These dimensional hardware items — including bolts, studs, nuts, washers, fittings, and specialty fasteners — are manufactured or specified to exact Texsteam dimensions for use with original pump assemblies.Correct hardware dimensions matter in high-pressure chemical injection service. Using non-OEM fasteners risks galling, cross-threading, or improper clamp load on fluid-end joints and manifold connections. The P62-037000-4200 is selected for material compatibility with pump body alloys, correct thread form, and the torque values called out in Texsteam installation and maintenance documentation for each pump series.Whether assembling a new pump or completing a field repair on an upstream corrosion inhibitor skid, using the correct hardware part number P62-037000-4200 from the original Baker Hughes / Dresser Texsteam product catalog ensures safe, leak-free, and specification-compliant results. The Texsteam name has represented reliable chemical injection since 1937 — maintaining that standard begins with factory-specified components at every level of the pump assembly.

P86-025100-0200 is a Texsteam hardware and fastener component used in the assembly and maintenance of chemical injection pump systems in the 1200, 3700, 4300, 5000, and 5100 Series. These dimensional hardware items — including bolts, studs, nuts, washers, fittings, and specialty fasteners — are manufactured or specified to exact Texsteam dimensions for use with original pump assemblies.Correct hardware dimensions matter in high-pressure chemical injection service. Using non-OEM fasteners risks galling, cross-threading, or improper clamp load on fluid-end joints and manifold connections. The P86-025100-0200 is selected for material compatibility with pump body alloys, correct thread form, and the torque values called out in Texsteam installation and maintenance documentation for each pump series.Whether assembling a new pump or completing a field repair on an upstream corrosion inhibitor skid, using the correct hardware part number P86-025100-0200 from the original Baker Hughes / Dresser Texsteam product catalog ensures safe, leak-free, and specification-compliant results. The Texsteam name has represented reliable chemical injection since 1937 — maintaining that standard begins with factory-specified components at every level of the pump assembly.

SPT 0001 is a Texsteam specialty service part designed for maintenance, repair, and overhaul of chemical injection pumps across the 1200, 3700, 4300, 5000, and 5100 Series. SPT-series items include multi-component service kits, replacement seal sets, calibration tools, and other specialty items assembled to simplify field and shop maintenance procedures.Scheduled preventive maintenance is critical for chemical injection pumps in continuous oil and gas service. Using factory-assembled SPT service kits ensures that every wear component — seals, O-rings, valve internals, and packing — is replaced simultaneously with parts dimensioned to OEM specifications, eliminating the inconsistency of mixed-source aftermarket components. This approach reduces unplanned downtime and maintains metering accuracy for corrosion inhibitors, scale preventers, and other pipeline treatment chemicals. Specify SPT 0001 when sourcing replacement seals and wear components for your scheduled overhaul intervals.Texsteam specialty service parts are produced at the Houston, Texas manufacturing facility under Baker Hughes / Dresser quality standards — the same standards that have backed Texsteam's reputation for reliable chemical injection since 1937. Order SPT 0001 for a single-part-number solution to your planned maintenance interval and keep your injection pump performing to original factory specification.

SPT 0010 is a Texsteam specialty service part designed for maintenance, repair, and overhaul of chemical injection pumps across the 1200, 3700, 4300, 5000, and 5100 Series. SPT-series items include multi-component service kits, replacement seal sets, calibration tools, and other specialty items assembled to simplify field and shop maintenance procedures.Scheduled preventive maintenance is critical for chemical injection pumps in continuous oil and gas service. Using factory-assembled SPT service kits ensures that every wear component — seals, O-rings, valve internals, and packing — is replaced simultaneously with parts dimensioned to OEM specifications, eliminating the inconsistency of mixed-source aftermarket components. This approach reduces unplanned downtime and maintains metering accuracy for corrosion inhibitors, scale preventers, and other pipeline treatment chemicals. Specify SPT 0010 when sourcing replacement seals and wear components for your scheduled overhaul intervals.Texsteam specialty service parts are produced at the Houston, Texas manufacturing facility under Baker Hughes / Dresser quality standards — the same standards that have backed Texsteam's reputation for reliable chemical injection since 1937. Order SPT 0010 for a single-part-number solution to your planned maintenance interval and keep your injection pump performing to original factory specification.

TA 0009 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0009 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0009 for a guaranteed fit and to maintain the original pump performance specification.

TA 0013 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0013 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0013 for a guaranteed fit and to maintain the original pump performance specification.

TA 0023 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0023 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0023 for a guaranteed fit and to maintain the original pump performance specification.

TA 0035 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0035 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0035 for a guaranteed fit and to maintain the original pump performance specification.

TA 0050 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0050 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0050 for a guaranteed fit and to maintain the original pump performance specification.

TA 0054 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0054 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0054 for a guaranteed fit and to maintain the original pump performance specification.

TA 0059 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0059 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0059 for a guaranteed fit and to maintain the original pump performance specification.

TA 0067 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0067 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0067 for a guaranteed fit and to maintain the original pump performance specification.

TA 0101 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0101 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0101 for a guaranteed fit and to maintain the original pump performance specification.

TA 0123 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0123 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0123 for a guaranteed fit and to maintain the original pump performance specification.

TA 0126 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0126 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0126 for a guaranteed fit and to maintain the original pump performance specification.