Pump
Showing 17686–17730 of 20125 results
-
Texsteam P61-075000-2800 – Hardware Component
$3.02P61-075000-2800 is a Texsteam hardware and fastener component used in the assembly and maintenance of chemical injection pump systems in the 1200, 3700, 4300, 5000, and 5100 Series. These dimensional hardware items — including bolts, studs, nuts, washers, fittings, and specialty fasteners — are manufactured or specified to exact Texsteam dimensions for use with original pump assemblies.Correct hardware dimensions matter in high-pressure chemical injection service. Using non-OEM fasteners risks galling, cross-threading, or improper clamp load on fluid-end joints and manifold connections. The P61-075000-2800 is selected for material compatibility with pump body alloys, correct thread form, and the torque values called out in Texsteam installation and maintenance documentation for each pump series.Whether assembling a new pump or completing a field repair on an upstream corrosion inhibitor skid, using the correct hardware part number P61-075000-2800 from the original Baker Hughes / Dresser Texsteam product catalog ensures safe, leak-free, and specification-compliant results. The Texsteam name has represented reliable chemical injection since 1937 — maintaining that standard begins with factory-specified components at every level of the pump assembly. -
Texsteam P62-037000-4200 – Hardware Component
$54.40P62-037000-4200 is a Texsteam hardware and fastener component used in the assembly and maintenance of chemical injection pump systems in the 1200, 3700, 4300, 5000, and 5100 Series. These dimensional hardware items — including bolts, studs, nuts, washers, fittings, and specialty fasteners — are manufactured or specified to exact Texsteam dimensions for use with original pump assemblies.Correct hardware dimensions matter in high-pressure chemical injection service. Using non-OEM fasteners risks galling, cross-threading, or improper clamp load on fluid-end joints and manifold connections. The P62-037000-4200 is selected for material compatibility with pump body alloys, correct thread form, and the torque values called out in Texsteam installation and maintenance documentation for each pump series.Whether assembling a new pump or completing a field repair on an upstream corrosion inhibitor skid, using the correct hardware part number P62-037000-4200 from the original Baker Hughes / Dresser Texsteam product catalog ensures safe, leak-free, and specification-compliant results. The Texsteam name has represented reliable chemical injection since 1937 — maintaining that standard begins with factory-specified components at every level of the pump assembly. -
Texsteam P86-025050-0200 – Hardware Component
$2.59P86-025050-0200 is a Texsteam hardware and fastener component used in the assembly and maintenance of chemical injection pump systems in the 1200, 3700, 4300, 5000, and 5100 Series. These dimensional hardware items — including bolts, studs, nuts, washers, fittings, and specialty fasteners — are manufactured or specified to exact Texsteam dimensions for use with original pump assemblies.Correct hardware dimensions matter in high-pressure chemical injection service. Using non-OEM fasteners risks galling, cross-threading, or improper clamp load on fluid-end joints and manifold connections. The P86-025050-0200 is selected for material compatibility with pump body alloys, correct thread form, and the torque values called out in Texsteam installation and maintenance documentation for each pump series.Whether assembling a new pump or completing a field repair on an upstream corrosion inhibitor skid, using the correct hardware part number P86-025050-0200 from the original Baker Hughes / Dresser Texsteam product catalog ensures safe, leak-free, and specification-compliant results. The Texsteam name has represented reliable chemical injection since 1937 — maintaining that standard begins with factory-specified components at every level of the pump assembly. -
Texsteam P86-025075-0200 – Hardware Component
$5.34P86-025075-0200 is a Texsteam hardware and fastener component used in the assembly and maintenance of chemical injection pump systems in the 1200, 3700, 4300, 5000, and 5100 Series. These dimensional hardware items — including bolts, studs, nuts, washers, fittings, and specialty fasteners — are manufactured or specified to exact Texsteam dimensions for use with original pump assemblies.Correct hardware dimensions matter in high-pressure chemical injection service. Using non-OEM fasteners risks galling, cross-threading, or improper clamp load on fluid-end joints and manifold connections. The P86-025075-0200 is selected for material compatibility with pump body alloys, correct thread form, and the torque values called out in Texsteam installation and maintenance documentation for each pump series.Whether assembling a new pump or completing a field repair on an upstream corrosion inhibitor skid, using the correct hardware part number P86-025075-0200 from the original Baker Hughes / Dresser Texsteam product catalog ensures safe, leak-free, and specification-compliant results. The Texsteam name has represented reliable chemical injection since 1937 — maintaining that standard begins with factory-specified components at every level of the pump assembly. -
Texsteam P86-025100-0200 – Hardware Component
$4.00P86-025100-0200 is a Texsteam hardware and fastener component used in the assembly and maintenance of chemical injection pump systems in the 1200, 3700, 4300, 5000, and 5100 Series. These dimensional hardware items — including bolts, studs, nuts, washers, fittings, and specialty fasteners — are manufactured or specified to exact Texsteam dimensions for use with original pump assemblies.Correct hardware dimensions matter in high-pressure chemical injection service. Using non-OEM fasteners risks galling, cross-threading, or improper clamp load on fluid-end joints and manifold connections. The P86-025100-0200 is selected for material compatibility with pump body alloys, correct thread form, and the torque values called out in Texsteam installation and maintenance documentation for each pump series.Whether assembling a new pump or completing a field repair on an upstream corrosion inhibitor skid, using the correct hardware part number P86-025100-0200 from the original Baker Hughes / Dresser Texsteam product catalog ensures safe, leak-free, and specification-compliant results. The Texsteam name has represented reliable chemical injection since 1937 — maintaining that standard begins with factory-specified components at every level of the pump assembly. -
Texsteam P86-031150-0200 – Hardware Component
$2.59P86-031150-0200 is a Texsteam hardware and fastener component used in the assembly and maintenance of chemical injection pump systems in the 1200, 3700, 4300, 5000, and 5100 Series. These dimensional hardware items — including bolts, studs, nuts, washers, fittings, and specialty fasteners — are manufactured or specified to exact Texsteam dimensions for use with original pump assemblies.Correct hardware dimensions matter in high-pressure chemical injection service. Using non-OEM fasteners risks galling, cross-threading, or improper clamp load on fluid-end joints and manifold connections. The P86-031150-0200 is selected for material compatibility with pump body alloys, correct thread form, and the torque values called out in Texsteam installation and maintenance documentation for each pump series.Whether assembling a new pump or completing a field repair on an upstream corrosion inhibitor skid, using the correct hardware part number P86-031150-0200 from the original Baker Hughes / Dresser Texsteam product catalog ensures safe, leak-free, and specification-compliant results. The Texsteam name has represented reliable chemical injection since 1937 — maintaining that standard begins with factory-specified components at every level of the pump assembly. -
Texsteam Series 1200 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13Designed specifically for operation on a beam pumped oil well, the Texsteam Series 1200 Chemical Injection pumps are positive displacement type pumps powered by direct connection to the movement of a walking beam, rod line or rocker arm. The connection is made by a length of nominal pipe, or a wire line. The unit pumps on the upstroke of the beam action. On the downstroke, the injector arm returns to its set position. The ratchet mechanism is housed in a precision-bored, heavy cast gray iron case and is submerged in oil for long life. The pump head design is efficient because of the horizontal plunger and vertical check valves; virtually trouble-free; easy to maintain; has stainless steel trim in standard heads; and a built-in to aid in priming, check pump action and catch chemical samples and external packing gland. The box assembly is heavy cast gray iron for maximum rigidity and has a galvanized lid and rigid galvanized lever arm. The pump head can be easily removed for cleaning and maintenance. An additional pump head can be installed if more volume is required or if there is a need to pump dissimilar fluids. A wide choice of model and plunger sizes is available. The Series 1200 can be supplied with or without unitized chemical tanks or with two mounted tanks or with tanks of various capacity and materials to suit the operating requirements. -
Texsteam Series 2200 Electric Pump
Price range: $2,140.02 through $3,590.13Maximum discharge pressure of 1,000 psi (69 Bar). Maximum volume of 61 gallons per day (122 gallons per day for Duplex model). Duplex version permits increased single chemical volume to different location, or different chemicals to be injected into either a common feed line or alternate locations. Stroke adjustment feature allows for precise low-volume injection rates, and can be adjusted while the pump is in operation. 1/4 Horsepower motors are available in single phase or three phase voltages, with totally enclosed, non-ventilated (TENV) or explosion-proof enclosures. The geared motor and gear reducer assembly is available in 15, 30, or 60 strokes per minute (SPM) versions to accommodate multiple chemical injection demands. Motors are NRTL third-party certified by CSA/UL for use in hazardous locations. Standard fluid ends are 316 grade stainless steel. Four standard plunger sizes are available: 3/16″, 1/4″, 3/8″, and 1/2″. Modular body design allows for easily interchangeable fluid ends. Standard oil-less design requires less lubrication and decreased maintenance demands. -
Texsteam Series 2400 Electric Pump
Price range: $6,048.82 through $22,043.88The Texsteam Series 2400 chemical injection pump is designed to deliver precise amounts of treatment chemicals for oil and gas production facilities, pipelines, process plants and other applications where a rugged, electrically driven positive displacement pump is required. The Series 2400 chemical injection pump utilizes C-faced motors and gear reducers available in 30 or 60 strokes per minute (SPM) configurations to address a variety of flow and pressure requirements. The Series 2400 pump is available in either a simplex or duplex configuration and has the flexibility to utilize plunger sizes of 1/2″, 3/4″, 1″, or 1-1/4″ to accommodate a wide number of pressures, flow rates or chemicals with one pump assembly. Features One horsepower motor is standard, and is available in single or three phase voltages, TEFC or explosion-proof enclosures and suitable for 50 or 60 Hertz applications. Two (2) horsepower motors are also available as an optional selection. Each pump head is independently adjustable while running for precise delivery of product, from 0-100 percent of capacity with repeatable accuracy to 1 percent of set point. A selection of packing materials is available to address a wide variety of chemical applications. Optional ceramic plungers are available for aggressive applications and to provide longer packing life. -
Texsteam Series 2500 Electric Pump
Price range: $1,626.10 through $8,448.93The 2500 Series of Texsteam chemical injection pumps are electric driven, positive displacement pumps utilizing C-faced motors and common gear reducers. The gear reducers are available in 15, 30, 60 and 120 strokes per minute configurations. By utilizing even further flexibility of a wide variety of plunger sizes, the 2500 Series can fill many application requirements of different flow and pressures. Maximum discharge pressure: 6,000 PSI (414 bar) w/ 3/16” plunger Maximum volume 139 gallons per day (528 liters per day) w/ 1/2” plunger Each head is adjustable while running Available simplex, duplex, triplex, or quadruplex configurations Mix or match head sizes – pump the same or different chemicals Available in four stroke rates: 15, 30, 60 or 120 strokes per minute Each head is independently coupled – user friendly in the field 1/2 horsepower motor standard; 1 or 3 phase, TEFC or explosion proof; 50 or 60 hertz Available with 3/16”, 1/4”, 3/8” or 1/2” plunger -
Texsteam Series 4300 Electric Pump
Price range: $2,197.64 through $16,773.19The Texsteam Series 4300 chemical injection pump is a rugged, easy to maintain proportioning pump offering a steady and precise flow of injected chemical treatments for your oil and gas, pipeline, and process plant operations,. The electrically driven positive displacement design incorporates an integral worm gear drive with three available ratios and six (6) different plunger sizes to provide a wide selection of volumes and pressures. An optional 10:1 ratio externally mounted gear reducer is available for feed rates as low as half a pint per day. Flow rates from .063 GPD to 325 GPD per head. Discharge pressures from 150 psig to 5000 psig. Motors are available in single or three-phase voltages and in TENV or explosion-proof enclosures. 10:1 ratio gear reducer option can provide flow rates from 1/2 pint per day to 1.25 GPD. The integral gear drive and crosshead mechanism are housed in a durable cast iron housing with a sight gauge to monitor lubrication level. The output gear is made from a high-strength alloy iron, and is bearing supported for maximum rigidity and reliable performance. A gasketed gear box cover provides a positive barrier against moisture, dirt, or other contaminants entering the gear box assembly. The liquid end sizes are interchangeable and can be adjusted while the pump is in operation. A selection of packing materials to address a wide variety of chemical applications. Options such as stainless steel tanks, tank gauges, and line check valves for specific customer requirements -
Texsteam Series 5000 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13Texsteam Series 5000 chemical injection pumps are positive displacement units powered by an integral gas/air motor. These pumps fill the requirements of a broad range of applications because of their ability to achieve high discharge pressures (up to 12,000 psig) and wide volume ranges. A horizontal plunger and vertical check valve arrangement provide high operating efficiency. The standard pump head has a Ductile Iron body and stainless steel trim. Stainless steel heads are available for high corrosive applications. A built-in priming valve facilitates pump head priming, enables the operator to easily check pump operation, and offers a sample-catching device. The pump frame and body castings are high-strength aluminum. The operating mechanism strokes in oil and is gasket sealed to protect against dust and other atmospheric influences. Oil-less models are also available. A standard equipment safety valve offers protection against accidental overpressure of the main diaphragm. The adjustable packing is equipped with lantern ring and a grease jack (except on 11 /4” head) for lubricating the plunger and packing to provide long life. Applications Introducing detergents in air-gas drilling operations Blending foaming agents in water laden gas wells High pressure addition of fluid compounds in blending and chemical processing Introduction of de-salting agents, de-emulsifiers, inhibitors and flocculants in crude oil and gas steams High- and low-pressure lubrication systems Methanol and alcohol injection in gas systems to prevent freezing General high pressure injection applications Fluid blending of extreme pressures within varied, controlled processes Hydrostatic testing Glycol circulation Water treatment -
Texsteam Series 5100 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13Texsteam 5100 Series Chemical Injectors are single acting, positive displacement plunger-type pumps, powered by gas via a diaphragm with a spring return. Speed control is accomplished by regulating the exhaust gas discharge flow. Reversal is accomplished by a direct spring-actuated switching mechanism (rotary three-way valve). Volume is controlled by the speed of the pump and by the stroke length, either 1” (25.4 mm) or 1/3” (8.5 mm) lengths. The 5100 Series is capable of pumping high pressures with gas pressure as low as 8 psig (0.6 bar) and handling volume output up to 30 gallons (113 liters) per day. The pump is lightweight, compact and contains a minimum of working parts for easy maintenance. Each fluid pump head is equipped with a stainless steel plunger, ball checks, ball check springs, top seat, top bushing, bottom bushing, adjustable VEE type packing and a priming valve. The packing yoke is equipped with a drain to monitor for possible packing leaks. Because of the sealed bearings, the unit is oil-less. Application The introduction of de-emulsifiers, solvents, corrosion inhibitors, de-salting agents and flocculants in oil country operation High pressure bearing lubrication Water treatment Blending processes in refining and process plants Injection of methanol in gas pipelines Hydrostatic testing Sampling -
Texsteam Series 6100 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13The Texsteam 6100 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive displacement, single or double acting, reciprocating pumps. The basic pump is designed for use with three fluid ends, a 1-1/4″ and 2-3/4″ diameter plunger and a 4″ diameter piston. The fluid ends are interchangeable with the modular power cylinder and can be assembled as single ended units or double ended units in all combinations of sizes. All fluid ends are designed to withstand maximum output force of the power cylinder. Due to the balanced valving of the power cylinder, it is, in theory, possible to operate the pump against a back pressure equal to the inlet power gas pressure; however, a differential in these two pressures must be maintained for the pump to stroke. When the supply gas is piped off to other areas, the pilot valves may also be connected to the pump exhaust manifold system. All fluid ends are designed with removable cartridge type ball check valves. These valves may be replaced without disconnecting the suction and discharge piping. -
Texsteam Series 9000 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13The Series 9000 Double Diaphragm Utility Pump is a double acting, positive displacement pump operated on either air or gas. A range of operating power pressures from 5 to 100 psig provide discharge volumes up to 60 gallons of water and discharge pressures up to 60 psig through 2” suction and discharge ports. It handles any liquid from alcohol to mud, liquids containing solids 1/4” in diameter with ease, and liquids containing abrasives with a minimum of wear. The 9000 can operate completely submerged. It is smokeless, quiet, and fireproof. This pump needs no priming for suction lifts to 14 feet of water, and can perform suction lifts to 23 feet when primed. -
Texsteam Series MX-5 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.131 to 62 GP H / 1 to 60 Strokes Per Minute Duplex Models Available No springs in the power cylinder-positive cycle operation Adjustable packing allows for planned maintenance Easily field serviceable Ability to recycle unused supply gas Lightweight Wide range of service gas pressure Minimum – 30 psig Maximum – 145 psig Option of ceramic plungers – longer life on the plunger and packing Variety of packing allows for many chemical compatibilities -
Texsteam Series MXG Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13The Texsteam MXG pump is the first to market MX pneumatic technology with new low flow capabilities and fewer components to provide the most accurate and dependable product for your pneumatic driven injection needs. The spring-free design is easier to repair with no spring used in the pneumatic process The pump incorporates differentiated needle valves to regulate the speed of the pump more accurately “Stall-free pump” – the MXG delivers improved low flow capabilities combined with increased inlet pressure to expand minimum strokes per minute range ZERO BLEED* solution – the MXG is capable of 100% exhaust capture, eliminating fugitive emissions -
Texsteam SK4947TA – Pump Assembly Component
$9.45SK4947TA is a Texsteam assembly component from the TC-series product line for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. TC-series assembly parts include multi-component subassemblies, manifold blocks, transition pieces, and mechanical linkage elements that integrate the pump head, valve, and drive-end subsystems into a complete pumping unit.Maintaining factory-correct TC assembly components is essential for preserving the structural integrity and flow-path geometry of Texsteam chemical injection pumps. These parts govern the interface between fluid-end and power-end assemblies, ensuring that pressure containment, port alignment, and dimensional relationships meet the original design specification for each pump model. Deviations from OEM dimensions can result in leakage, misalignment, or premature wear of adjacent components in corrosion inhibitor and scale prevention service.Sourced from the Baker Hughes / Dresser Texsteam manufacturing line in Houston, Texas, SK4947TA is the verified OEM replacement for its specific pump model. With a heritage of precision chemical dosing equipment dating to 1937, Texsteam assembly parts carry over 80 years of engineering refinement. Order by part number SK4947TA to ensure correct fitment across upstream, midstream, and downstream oil and gas applications. -
Texsteam SPT 0001 – Specialty Service Part
$727.48SPT 0001 is a Texsteam specialty service part designed for maintenance, repair, and overhaul of chemical injection pumps across the 1200, 3700, 4300, 5000, and 5100 Series. SPT-series items include multi-component service kits, replacement seal sets, calibration tools, and other specialty items assembled to simplify field and shop maintenance procedures.Scheduled preventive maintenance is critical for chemical injection pumps in continuous oil and gas service. Using factory-assembled SPT service kits ensures that every wear component — seals, O-rings, valve internals, and packing — is replaced simultaneously with parts dimensioned to OEM specifications, eliminating the inconsistency of mixed-source aftermarket components. This approach reduces unplanned downtime and maintains metering accuracy for corrosion inhibitors, scale preventers, and other pipeline treatment chemicals. Specify SPT 0001 when sourcing replacement seals and wear components for your scheduled overhaul intervals.Texsteam specialty service parts are produced at the Houston, Texas manufacturing facility under Baker Hughes / Dresser quality standards — the same standards that have backed Texsteam's reputation for reliable chemical injection since 1937. Order SPT 0001 for a single-part-number solution to your planned maintenance interval and keep your injection pump performing to original factory specification. -
Texsteam SPT 0002 – Specialty Service Part
$1,454.96SPT 0002 is a Texsteam specialty service part designed for maintenance, repair, and overhaul of chemical injection pumps across the 1200, 3700, 4300, 5000, and 5100 Series. SPT-series items include multi-component service kits, replacement seal sets, calibration tools, and other specialty items assembled to simplify field and shop maintenance procedures.Scheduled preventive maintenance is critical for chemical injection pumps in continuous oil and gas service. Using factory-assembled SPT service kits ensures that every wear component — seals, O-rings, valve internals, and packing — is replaced simultaneously with parts dimensioned to OEM specifications, eliminating the inconsistency of mixed-source aftermarket components. This approach reduces unplanned downtime and maintains metering accuracy for corrosion inhibitors, scale preventers, and other pipeline treatment chemicals. Specify SPT 0002 when sourcing replacement seals and wear components for your scheduled overhaul intervals.Texsteam specialty service parts are produced at the Houston, Texas manufacturing facility under Baker Hughes / Dresser quality standards — the same standards that have backed Texsteam's reputation for reliable chemical injection since 1937. Order SPT 0002 for a single-part-number solution to your planned maintenance interval and keep your injection pump performing to original factory specification. -
Texsteam SPT 0004 – Specialty Service Part
$116.25SPT 0004 is a Texsteam specialty service part designed for maintenance, repair, and overhaul of chemical injection pumps across the 1200, 3700, 4300, 5000, and 5100 Series. SPT-series items include multi-component service kits, replacement seal sets, calibration tools, and other specialty items assembled to simplify field and shop maintenance procedures.Scheduled preventive maintenance is critical for chemical injection pumps in continuous oil and gas service. Using factory-assembled SPT service kits ensures that every wear component — seals, O-rings, valve internals, and packing — is replaced simultaneously with parts dimensioned to OEM specifications, eliminating the inconsistency of mixed-source aftermarket components. This approach reduces unplanned downtime and maintains metering accuracy for corrosion inhibitors, scale preventers, and other pipeline treatment chemicals. Specify SPT 0004 when sourcing replacement seals and wear components for your scheduled overhaul intervals.Texsteam specialty service parts are produced at the Houston, Texas manufacturing facility under Baker Hughes / Dresser quality standards — the same standards that have backed Texsteam's reputation for reliable chemical injection since 1937. Order SPT 0004 for a single-part-number solution to your planned maintenance interval and keep your injection pump performing to original factory specification. -
Texsteam SPT 0010 – Specialty Service Part
$4,726.82SPT 0010 is a Texsteam specialty service part designed for maintenance, repair, and overhaul of chemical injection pumps across the 1200, 3700, 4300, 5000, and 5100 Series. SPT-series items include multi-component service kits, replacement seal sets, calibration tools, and other specialty items assembled to simplify field and shop maintenance procedures.Scheduled preventive maintenance is critical for chemical injection pumps in continuous oil and gas service. Using factory-assembled SPT service kits ensures that every wear component — seals, O-rings, valve internals, and packing — is replaced simultaneously with parts dimensioned to OEM specifications, eliminating the inconsistency of mixed-source aftermarket components. This approach reduces unplanned downtime and maintains metering accuracy for corrosion inhibitors, scale preventers, and other pipeline treatment chemicals. Specify SPT 0010 when sourcing replacement seals and wear components for your scheduled overhaul intervals.Texsteam specialty service parts are produced at the Houston, Texas manufacturing facility under Baker Hughes / Dresser quality standards — the same standards that have backed Texsteam's reputation for reliable chemical injection since 1937. Order SPT 0010 for a single-part-number solution to your planned maintenance interval and keep your injection pump performing to original factory specification. -
Texsteam SPT 0012 – Specialty Service Part
$339.19SPT 0012 is a Texsteam specialty service part designed for maintenance, repair, and overhaul of chemical injection pumps across the 1200, 3700, 4300, 5000, and 5100 Series. SPT-series items include multi-component service kits, replacement seal sets, calibration tools, and other specialty items assembled to simplify field and shop maintenance procedures.Scheduled preventive maintenance is critical for chemical injection pumps in continuous oil and gas service. Using factory-assembled SPT service kits ensures that every wear component — seals, O-rings, valve internals, and packing — is replaced simultaneously with parts dimensioned to OEM specifications, eliminating the inconsistency of mixed-source aftermarket components. This approach reduces unplanned downtime and maintains metering accuracy for corrosion inhibitors, scale preventers, and other pipeline treatment chemicals. Specify SPT 0012 when sourcing replacement seals and wear components for your scheduled overhaul intervals.Texsteam specialty service parts are produced at the Houston, Texas manufacturing facility under Baker Hughes / Dresser quality standards — the same standards that have backed Texsteam's reputation for reliable chemical injection since 1937. Order SPT 0012 for a single-part-number solution to your planned maintenance interval and keep your injection pump performing to original factory specification. -
Texsteam TA 0001 – Valve and Seal Component
$45.57TA 0001 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0001 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0001 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0009 – Valve and Seal Component
$22.00TA 0009 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0009 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0009 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0010 – Valve and Seal Component
$59.92TA 0010 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0010 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0010 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0011 – Valve and Seal Component
$14.95TA 0011 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0011 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0011 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0013 – Valve and Seal Component
$23.70TA 0013 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0013 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0013 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0020 – Valve and Seal Component
$5.18TA 0020 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0020 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0020 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0022 – Valve and Seal Component
$142.65TA 0022 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0022 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0022 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0023 – Valve and Seal Component
$23.34TA 0023 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0023 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0023 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0025 – Valve and Seal Component
$103.54TA 0025 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0025 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0025 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0032 – Valve and Seal Component
$191.57TA 0032 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0032 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0032 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0035 – Valve and Seal Component
$43.99TA 0035 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0035 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0035 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0043 – Valve and Seal Component
$19.76TA 0043 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0043 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0043 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0047 – Valve and Seal Component
$194.38TA 0047 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0047 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0047 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0050 – Valve and Seal Component
$103.33TA 0050 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0050 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0050 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0051 – Valve and Seal Component
$54.66TA 0051 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0051 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0051 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0053 – Valve and Seal Component
$6.67TA 0053 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0053 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0053 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0054 – Valve and Seal Component
$6.47TA 0054 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0054 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0054 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0055 – Valve and Seal Component
$76.88TA 0055 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0055 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0055 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0058 – Valve and Seal Component
$7.99TA 0058 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0058 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0058 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0059 – Valve and Seal Component
$107.33TA 0059 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0059 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0059 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0064 – Valve and Seal Component
$66.66TA 0064 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0064 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0064 for a guaranteed fit and to maintain the original pump performance specification. -
Texsteam TA 0065 – Valve and Seal Component
$161.80TA 0065 is a Texsteam internal valve and seal component for chemical injection pumps in the 1200, 3700, 4300, 5000, and 5100 Series. The TA-series encompasses check valve balls, springs, valve discs, O-rings, inlet and outlet bodies, stuffing box seats, and small precision internals that govern the directional flow and leak-free operation of each pump stroke.In chemical injection service, internal valve components experience repeated pressure cycling against aggressive fluid chemistries — corrosion inhibitors, acids, methanol, and scale inhibitors. Worn or damaged valve balls and seats cause back-leakage that degrades metering accuracy and can allow corrosive chemicals to migrate into unintended pump zones. Replacing with the factory-correct TA 0065 restores the tight shut-off and proper cracking pressure specified by Texsteam engineering.Manufactured at the Baker Hughes / Dresser Texsteam facility in Houston, Texas, TA-series parts have been produced to consistent tolerances since the company's founding in 1937. Each component is dimensioned to match the exact bore, thread, and seat geometry of the target pump series. Use part number TA 0065 for a guaranteed fit and to maintain the original pump performance specification.