Lubricants
Showing 1126–1170 of 2942 results
-
Jet-Lube RUN-N-SEAL 5 GALLON
$169.02RUN-N-SEAL 5 Gallon -
Jet-Lube RUN-N-SEAL ECF 20 KG
$2,788.08JET-LUBE RUN-N-SEAL ECF (Environmental Compound Formula) is a patented metal-free, high-pressure sealant compound containing graphite and other nonmetallic, inorganic, anti-wear additives blended into a high-quality lithium complex base grease. The lithium complex grease provides a high melting point, ensures brushability over a wide range of temperatures, and has excellent inherent water resistance. BENEFITS: Patented metal-free Non-metallic, inorganic, anti-wear additives Friction factor of 0.9 relative to API-Modified Contains additives for protection against rust, corrosion, and oxidation Prevents leakage H2S inhibited Ospar Commission-HOCNF (Harmonized Offshore Chemical Notification Format) Classification: "Yellow" rating for Norway Classification: "E" for the United Kingdom and the Netherlands High-pressure sealant alternative for API-Modified. Provides an excellent seal in large and small diameter, non-shouldered threads. High film strength to protect against wear, galling, and seizure. Exceeds all of the performance criteria described in API spec 5CT and tested in conformance with API RP 5A3. Applications For use on OCTG Connections, Flow lines as a thread sealant. Ideally suited for 8-Round buttress threads. Specialized formulata for cold weather claimants. Designed to stick to cold steel threads and collars. This formula has multipurpose functions as it is designed to be used on large and small diameter, non-shouldered threads and connections. Service Rating 0°F to 450°F -18°C to 232°C SDS TDS -
Jet-Lube RUN-N-SEAL W/H2S 5 GALLON
$169.30RUN-N-SEAL W/H2S 5 Gallon -
Jet-Lube Silicone Compound DM
$90.48JET-LUBE SILICONE COMPOUND DM is a premium silicone compound for use in a wide variety of applications. Its low volatility, non-melting thickener and high dielectric strength make it the compound of choice for moisture proofing ignition systems, spark plug connections, electrical assemblies, cable and battery terminals and other similar applications. BENEFITS: Has no dropping point Excellent work stability under high loads Highly water resistant High strength fluid film Silicone emulsion Pumpable formula Direct Comparison to Dow Corning® 111 Dielectric strength-500volts Valve lubricant Temkin Load – 65 Lbs. Water Resistant Nontoxic SILICONE COMPOUND DM is a dielectric, translucent paste that provides excellent lubrication and sealing properties for plug and gate valves, stuffing boxes, o-rings, vacuum and pressure systems. The low volatility and inert properties allow it to be used on a wide range of elastomers and plastics. It is not recommended for use on surfaces to be painted. Applications Ideally suited as an insulator for electrical connectors against the elements. Thyrotrophic gel acts as a water proofing agent and O-ring lubricant for instrumentation boxes, motor covers, air intakes, and vacuum systems. Use to protect ignition systems, spark plug connections, electrical assemblies, cable and battery terminals from moisture. Not recommended for surfaces to be painted. Service Rating -70°F to 400°F -57°C to 204°C -
Jet-Lube ThreadSeal Lead/Zinc-Free Thread Compound
Price range: $108.95 through $235.25Lead/Zinc-Free Thread Compound ThreadSeal represents the next generation—environmentally responsible, high-performance thread compound—tailored to meet today’s demanding oilfield applications. Serving as a superior alternative to API-Modified, ThreadSeal offers robust sealing, anti-seize protection, and long-term corrosion resistance under extreme pressure conditions. This lithium-based thread compound contains copper, graphite, and a blend of nonmetallic, inorganic, extreme pressure, and antiwear additives. Its high-quality lithium base grease provides a high melting point and excellent water resistance, allowing it to adhere effectively to wet or oily threads. ThreadSeal seals connections up to 10,000 psi while protecting against rust, corrosion, oxidation, galling, and H₂S attack. It withstands high-pressure, high-temperature environments, and maintains stability and resists chemically aggressive conditions, including sour gas and CO₂. This compound delivers exceptional corrosion protection, outperforming most alternatives in salt water fog spray testing, making it an excellent choice for long-term storage applications. Brushable across a wide temperature range, ThreadSeal is ideal for use on API and Semi-Premium OCTG connections, flow lines, and subsurface tools. Conforms to API RP 5A3 Fourth Edition standards and meets or exceeds all key performance requirements, including evaporation, gas evolution, oil separation, water leaching, and copper corrosion. Benefits: No lead or zinc, eliminating the potential for hydrogen gas evolution. Contains additive that protects against rust, corrosion, and oxidation. Sticks well to wet or oily thread surfaces. H₂S inhibited. Specifications: Base Materials: Lithium/Petroleum Friction / Nut-Factor: 1.0 (Relative to API-MODIFIED) Certifications: Conforms with API 5A3 for use with casing, tubing, and line pipe. Service Rating: 0°F (-18°C) to 500°F (260°C) | Brushable Temp: 10°F (-12°C) PDS -
Jet-Lube V-2 Multi-Purpose Thread Sealant
$56.08Multi-Purpose PTFE Thread Sealant Description V-2 Multi-Purpose Thread Sealant is a non-toxic, environmentally safe, high performance thread sealant which contains no lead or metals. V-2 is easily applied and is brushable at low temperatures. Applications Soft-setting, non-petroleum-based thread sealant for use with potable water, liquids, and gases where immediate pressurization is desirable or necessary. May be used on stainless steel, aluminum, brass, copper, iron, polyethylene, reinforced fiberglass, and PVC. Do not use on ABS and CPVC. For ABS and CPVC, use JET-LUBE® TFW™ Thread Sealant with PTFE -
Jet-Lube WHITE LIGHTNING 46 LB/21 KG.
$125.56WHITE LIGHTNING 46 lb/21 kg. -
Jet-Lube WIRE LINE ECF 400 LB DRUM
$2,440.91Wire Rope & Chain Lubricant - Environmental Formula Jet-Lube WIRE LINE ECF is a unique product for wire line applications where a grease-type lubricant is required. Wire Line Lubricant ECF is specially formulated for slick, electric and braided lines. This compound blend provides the level of biodegradation required to meet the Ospar Commission-HOCNF (Harmonized Offshore Chemical Notification Format) Norwegian "Yellow" and the combined UK and Netherlands "E" categories. Benefits of using Wire Line Lubricant ECF™ "Yellow" environmental category for Norway Biodegradability Passes the biotoxicity test H2S Prevents rust & corrosion Easy-flow Penetrates the wire core Easy to apply Non-conductive Outstanding rust prevention Wide temperature service Extremely water-resistant Contains no VOC's Specifications 29329 Jet-Lube WIRE LINE ECF 400 LB DRUM Base Materials: Compound Blend Certifications: Eco-Certified Service Rating: -20°F to 500°F, -29°C to 260°C TDS SDS -
Jet-Lube Z-40 30 LB. PAIL
$127.25Z-40 30 lb. PAIL -
Jet-Lube Z-40 60 LB. PAIL
$239.33Z-40 60 lb. Pail -
Jet-Lube Z-60 40 LB.
$216.08Drill Collar & Tool Joint Compound Jet-Lube Z-60 contains prime grade zinc and formulated with 60% metallic zinc, meeting the metallic zinc requirements described in API Bulletin 5A2. Z-60™ contains special additives to reduce the plating and buildup of metallic zinc encountered with other zinc compounds. Benefits of using Z-60™ Non-plating Low sulfur content Non-reactive Brushable over a wide temperature range Consistent rig floor makeup Resistant to further downhole makeup Sticks to wet joints Non-reactive Specifications of 20713 Jet-Lube Z-60 40 LB. Base Materials: Aluminum Complex / Petroleum Friction / K-Factor: 1 Service Rating: 0°F to 300°F, -18°C to 150°C TDS SDS -
Jet-Lube Z-60 70 LB. PAIL
$286.40Drill Collar & Tool Joint Compound Jet-Lube Z-60 contains prime grade zinc and formulated with 60% metallic zinc, meeting the metallic zinc requirements described in API Bulletin 5A2. Z-60™ contains special additives to reduce the plating and buildup of metallic zinc encountered with other zinc compounds. Benefits of using Z-60™ Non-plating Low sulfur content Non-reactive Brushable over a wide temperature range Consistent rig floor makeup Resistant to further downhole makeup Sticks to wet joints Non-reactive Specifications of 20715 Jet-Lube Z-60 70 LB. PAIL Base Materials: Aluminum Complex / Petroleum Friction / K-Factor: 1 Service Rating: 0°F to 300°F, -18°C to 150°C TDS SDS -
JLS ARCTIC 5 Gallon
$114.47This product is available in another size. Learn more here: JLS ARCTIC 5 Gallon -
KILN TIRE COMPOUND DRUM Open Gear Lubricants
Kiln Tire Compound is a lubricant for rotary kiln support designed to provide a coefficient of friction that avoids the sliding of the rim, avoiding wear and tear deterioration of the surface. Kiln Tire Compound has the appearance of a fat to facilitate its application with manual or machines such as Farval, Lincoln, Memolube or electrolube. Kiln Tire Compound contains graphite in suspension which forms a dark cover that provides a better distribution of loads and, therefore, avoids fatigue wear of material.CHARACTERISTICS: Does not contain solvents. Does not irritate the skin or damage the environment Does not contain water. Can be applied in casualties Temperatures. Easy to control. When applied, it forms a film Dark, easily visible Size and Type Container: Drum Weight: 461 LBS -
KOL’R-KING 1 Gallon PAIL
$70.18This product is available in another size. Learn more here: KOL’R KING Drill Collar Compound contains 60% pure metallic lead, rust and corrosion inhibitors, plus special proprietary binders to reduce lead buildup and minimize the need for wire brushing on breakout. The premium quality metallic lead in KOL’R KING meets or exceeds the lead specifications listed in the First Appendix of API Recommended Practice 5A3. Applications KOL’R KING Drill Collar Compound is designed to provide maximum protection of drill collar threads and shoulders over a wide variety of conditions. The premium quality metallic lead forms a gasket-like shield on threads and shoulders and acts as a cushion, preventing direct metal-to-metal contact, and protects against damage from galling or seizure caused by extreme shock loads on drill collars. The high volume of solids also allows KOL’R KING to be used as a pipe thread sealant and as an anti-seize thread compound. Should not be used where the use of products containing Lead is prohibited. -
KOPPER PLATE 12- 1/2# Greases
Kopper Plate is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite, dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. Kopper Plate contains a patented EP additive to provide extra protection no other compound can offer. Kopper Plate provides a shield against metal-to-metal contact, thus preventing seizure and corrosion. Its ingredients create an effective matrix between mated surfaces and are unaffected by contraction or expansion. It fills irregularities and imperfections and resists welding, hardening or setting. Kopper Plate provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up or wash off. Kopper Plate has no equal in temperature services up to 1,800°F (982°C). Fittings that are heated red hot, then allowed to cool, can quickly be disassembled without seizure or distortion. Kopper Plate is recommended for production and maintenance jobs where speed in assembling and dismantling is essential. It assists in reducing downtime and provides full use of machinery and equipment, saving valuable man-hours while increasing production. Kopper Plate is recommended on drill tool joints, threaded drill stems and as a hydraulic hammer lubricant. BENEFITS: LEAD-FREE - environmentally safe. PROTECTION - protects against seizure, heat-freeze, galling, rust and corrosion. LOWERS FRICTION - reduces wrench torque. ECONOMICAL - permits reuse of fittings; saves stud, bolt and nut replacement. REDUCED MAINTENANCE COSTS - speeds assembly and dismantling. STABILITY - not affected by contraction, expansion or vibration. NOT RUNNY - will not run, drip, or settle out. APPLICATIONS: Nut - Bushings Hyd. Hammers - Flanges Chains - Bull Plugs - Tees Ways Punches - Adapters - Packings Some Gears - Taps Bolts - Elevators Unions - Studs - Sheaves Couplings - Elbows - Dies Valve Stems - Slides - Drives U-Bolts - Return Bands - Screws Joints - Keyways - Press FitsManifolds Tube - Threads - Fittings Lifts - Nipples - GasketsNote: Not for use on oxygen lines.Size and Type Container: CS Weight: 8 LBS. -
KOPPER PLATE 12-1# Greases
Kopper Plate is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite, dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. Kopper Plate contains a patented EP additive to provide extra protection no other compound can offer. Kopper Plate provides a shield against metal-to-metal contact, thus preventing seizure and corrosion. Its ingredients create an effective matrix between mated surfaces and are unaffected by contraction or expansion. It fills irregularities and imperfections and resists welding, hardening or setting. Kopper Plate provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up or wash off. Kopper Plate has no equal in temperature services up to 1,800°F (982°C). Fittings that are heated red hot, then allowed to cool, can quickly be disassembled without seizure or distortion. Kopper Plate is recommended for production and maintenance jobs where speed in assembling and dismantling is essential. It assists in reducing downtime and provides full use of machinery and equipment, saving valuable man-hours while increasing production. Kopper Plate is recommended on drill tool joints, threaded drill stems and as a hydraulic hammer lubricant. BENEFITS: LEAD-FREE - environmentally safe. PROTECTION - protects against seizure, heat-freeze, galling, rust and corrosion. LOWERS FRICTION - reduces wrench torque. ECONOMICAL - permits reuse of fittings; saves stud, bolt and nut replacement. REDUCED MAINTENANCE COSTS - speeds assembly and dismantling. STABILITY - not affected by contraction, expansion or vibration. NOT RUNNY - will not run, drip, or settle out. APPLICATIONS: Nut - Bushings Hyd. Hammers - Flanges Chains - Bull Plugs - Tees Ways Punches - Adapters - Packings Some Gears - Taps Bolts - Elevators Unions - Studs - Sheaves Couplings - Elbows - Dies Valve Stems - Slides - Drives U-Bolts - Return Bands - Screws Joints - Keyways - Press FitsManifolds Tube - Threads - Fittings Lifts - Nipples - GasketsNote: Not for use on oxygen lines.Size and Type Container: CS Weight: 15 LBS. -
KOPPER PLATE 12-2# Greases
Kopper Plate is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite, dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. Kopper Plate contains a patented EP additive to provide extra protection no other compound can offer. Kopper Plate provides a shield against metal-to-metal contact, thus preventing seizure and corrosion. Its ingredients create an effective matrix between mated surfaces and are unaffected by contraction or expansion. It fills irregularities and imperfections and resists welding, hardening or setting. Kopper Plate provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up or wash off. Kopper Plate has no equal in temperature services up to 1,800°F (982°C). Fittings that are heated red hot, then allowed to cool, can quickly be disassembled without seizure or distortion. Kopper Plate is recommended for production and maintenance jobs where speed in assembling and dismantling is essential. It assists in reducing downtime and provides full use of machinery and equipment, saving valuable man-hours while increasing production. Kopper Plate is recommended on drill tool joints, threaded drill stems and as a hydraulic hammer lubricant. BENEFITS: LEAD-FREE - environmentally safe. PROTECTION - protects against seizure, heat-freeze, galling, rust and corrosion. LOWERS FRICTION - reduces wrench torque. ECONOMICAL - permits reuse of fittings; saves stud, bolt and nut replacement. REDUCED MAINTENANCE COSTS - speeds assembly and dismantling. STABILITY - not affected by contraction, expansion or vibration. NOT RUNNY - will not run, drip, or settle out. APPLICATIONS: Nut - Bushings Hyd. Hammers - Flanges Chains - Bull Plugs - Tees Ways Punches - Adapters - Packings Some Gears - Taps Bolts - Elevators Unions - Studs - Sheaves Couplings - Elbows - Dies Valve Stems - Slides - Drives U-Bolts - Return Bands - Screws Joints - Keyways - Press FitsManifolds Tube - Threads - Fittings Lifts - Nipples - GasketsNote: Not for use on oxygen lines.Size and Type Container: CS Weight: 28 LBS. -
KOPPER PLATE Keg Greases
Kopper Plate is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite, dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. Kopper Plate contains a patented EP additive to provide extra protection no other compound can offer. Kopper Plate provides a shield against metal-to-metal contact, thus preventing seizure and corrosion. Its ingredients create an effective matrix between mated surfaces and are unaffected by contraction or expansion. It fills irregularities and imperfections and resists welding, hardening or setting. Kopper Plate provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up or wash off. Kopper Plate has no equal in temperature services up to 1,800°F (982°C). Fittings that are heated red hot, then allowed to cool, can quickly be disassembled without seizure or distortion. Kopper Plate is recommended for production and maintenance jobs where speed in assembling and dismantling is essential. It assists in reducing downtime and provides full use of machinery and equipment, saving valuable man-hours while increasing production. Kopper Plate is recommended on drill tool joints, threaded drill stems and as a hydraulic hammer lubricant. BENEFITS: LEAD-FREE - environmentally safe. PROTECTION - protects against seizure, heat-freeze, galling, rust and corrosion. LOWERS FRICTION - reduces wrench torque. ECONOMICAL - permits reuse of fittings; saves stud, bolt and nut replacement. REDUCED MAINTENANCE COSTS - speeds assembly and dismantling. STABILITY - not affected by contraction, expansion or vibration. NOT RUNNY - will not run, drip, or settle out. APPLICATIONS: Nut - Bushings Hyd. Hammers - Flanges Chains - Bull Plugs - Tees Ways Punches - Adapters - Packings Some Gears - Taps Bolts - Elevators Unions - Studs - Sheaves Couplings - Elbows - Dies Valve Stems - Slides - Drives U-Bolts - Return Bands - Screws Joints - Keyways - Press FitsManifolds Tube - Threads - Fittings Lifts - Nipples - GasketsNote: Not for use on oxygen lines.Size and Type Container: Keg Weight: 158 LBS. -
KOPPER PLATE Pail Greases
Kopper Plate is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite, dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. Kopper Plate contains a patented EP additive to provide extra protection no other compound can offer. Kopper Plate provides a shield against metal-to-metal contact, thus preventing seizure and corrosion. Its ingredients create an effective matrix between mated surfaces and are unaffected by contraction or expansion. It fills irregularities and imperfections and resists welding, hardening or setting. Kopper Plate provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up or wash off. Kopper Plate has no equal in temperature services up to 1,800°F (982°C). Fittings that are heated red hot, then allowed to cool, can quickly be disassembled without seizure or distortion. Kopper Plate is recommended for production and maintenance jobs where speed in assembling and dismantling is essential. It assists in reducing downtime and provides full use of machinery and equipment, saving valuable man-hours while increasing production. Kopper Plate is recommended on drill tool joints, threaded drill stems and as a hydraulic hammer lubricant. BENEFITS: LEAD-FREE - environmentally safe. PROTECTION - protects against seizure, heat-freeze, galling, rust and corrosion. LOWERS FRICTION - reduces wrench torque. ECONOMICAL - permits reuse of fittings; saves stud, bolt and nut replacement. REDUCED MAINTENANCE COSTS - speeds assembly and dismantling. STABILITY - not affected by contraction, expansion or vibration. NOT RUNNY - will not run, drip, or settle out. APPLICATIONS: Nut - Bushings Hyd. Hammers - Flanges Chains - Bull Plugs - Tees Ways Punches - Adapters - Packings Some Gears - Taps Bolts - Elevators Unions - Studs - Sheaves Couplings - Elbows - Dies Valve Stems - Slides - Drives U-Bolts - Return Bands - Screws Joints - Keyways - Press FitsManifolds Tube - Threads - Fittings Lifts - Nipples - GasketsNote: Not for use on oxygen lines.Size and Type Container: Pail Weight: 52 LBS. -
KOPR-KOTE ARCTIC 2-1/2 GALLON
-
KOPR-KOTE ARCTIC 5 GALLON
$284.67Oilfield Tool Joint & Drill Collar Compound - Arctic Formula Jet-Lube Kopr-Kote Arctic Drill Collar and Tool Joint Compound is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE ARCTIC uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE®. For severe cold drilling applications KOPR-KOTE ARCTIC utilizes very low pour-point naphthenic oil which greatly improves the applicability of the compounds to the connection while providing the same water resistance of standard KOPR-KOTE. Benefits of using Kopr-Kote Arctic Repeatable frictional characteristics Resistance to downhole make-up Highly adhesive Improved low temperature applicability Contains no lead or zinc Extreme pressure additives Sticks to wet joints Benefits Repeatable frictional characteristics High temp complex grease Resistance to make up downhole Not considered a marine pollutant Highly adhesive Specifications Base Materials: Anhydrous Calcium / Petroleum Friction / K-Factor: 1.15 (drill strings) Relative to API RP 7G, 1.40 (relative to API-Mod) Relative to API RP 5A3 Certifications: Not classified as marine pollutant - DOT Approval CA2004080025 View all -
KOPR-KOTE GEOTHERMAL 1 GALLON
$58.25Oilfield Tool Joint & Drill Collar Compound - Geothermal Formula Kopr-Kote Geothermal Tool Joint & Drill Collar Coumpund is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE's solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. Benefits Ideal where extreme high temps are encountered Contains no lead or zinc Extreme pressure additives provide additional protection against seizing, galling and allow consistent makeup Sticks to wet joints Unequaled resistance to makeup downhole Specifications Friction / K-Factor: 1.15 Certifications: NFS Registered H2 #120923 View all -
L1004 – LIQUID WRENCH® LIGHT MACHINE OIL
Package Contents: 4 FL OZ Case Weight: 4 Case Dimensions L x W x H: 6.69 x 5.44 x 6.88 Case Cube: 0.145 Cases / Pallet: 264 -
L103 – LIQUID WRENCH® PENETRATING OIL 3 OZ.
Package Contents: 3 OZ Case Weight: 3 Case Dimensions L x W x H: 8.8 x 6.8 x 5.5 Case Cube: 0.19 Cases / Pallet: 270 -
L103CLIP – LIQUID WRENCH® PENETRATING OIL HANGING MERCHANDISER
Package Contents: 3 Case Weight: 3 Case Dimensions L x W x H: 16.38 x 4.25 x 4.75 Case Cube: 0.19 Cases / Pallet: 220 -
L104 – LIQUID WRENCH® PENETRATING OIL 4 OZ DROPPER
Package Contents: 4 FL OZ Case Weight: 3.75 Case Dimensions L x W x H: 6.7 x 5.4 x 6.9 Case Cube: 0.144 Cases / Pallet: 264 -
L106 – LIQUID WRENCH® PENETRATING OIL 5.5 OZ.
Package Contents: 5.5 OZ Case Weight: 7 Case Dimensions L x W x H: 8.8 x 6.8 x 7.4 Case Cube: 0.256 Cases / Pallet: 216 -
L112 – LIQUID WRENCH® PENETRATING OIL 11 OZ.
Package Contents: 11 OZ Case Weight: 12 Case Dimensions L x W x H: 10.9 x 8.4 x 8.8 Case Cube: 0.466 Cases / Pallet: 133 -
L112/4 – LIQUID WRENCH® PENETRATING OIL 4 PACK
Package Contents: 11 OZ Case Weight: 4 Case Dimensions L x W x H: 6.5 x 5.81 x 8.38 Case Cube: 0.183 Cases / Pallet: 230 -
L112/6 – LIQUID WRENCH® PENETRATING OIL 6 PACK
Package Contents: 11 OZ Case Weight: 6 Case Dimensions L x W x H: 8.25 x 5.5 x 8.32 Case Cube: 0.218 Cases / Pallet: 185 -
L134 – LIQUID WRENCH® PENETRATING OIL 1 GALLON
Package Contents: 1 GAL Case Weight: 36 Case Dimensions L x W x H: 16.25 x 11 x 12.6 Case Cube: 1.303 Cases / Pallet: 30 -
L206 – LIQUID WRENCH® LUBRICATING OIL 5.5 OZ.
Package Contents: 5.5 OZ Case Weight: 7 Case Dimensions L x W x H: 9.13 x 6.88 x 7.25 Case Cube: 0.264 Cases / Pallet: 216 -
L212 – LIQUID WRENCH® LUBRICATING OIL 11 OZ.
Package Contents: 11 OZ Case Weight: 12 Case Dimensions L x W x H: 10.9 x 8.4 x 8.8 Case Cube: 0.466 Cases / Pallet: 133 -
L212/4 – LIQUID WRENCH® LUBRICATING OIL 4 PACK
Package Contents: 11 OZ Case Weight: 4 Case Dimensions L x W x H: 6.5 x 5.81 x 8.38 Case Cube: 0.183 Cases / Pallet: 230 -
L508 – LIQUID WRENCH® DRY LUBRICANT
Package Contents: 6 OZ Case Weight: 8 Case Dimensions L x W x H: 8.75 x 6.69 x 6.75 Case Cube: 0.229 Cases / Pallet: 162 -
L512 – LIQUID WRENCH® DRY LUBRICANT
Package Contents: 11 OZ Case Weight: 12 Case Dimensions L x W x H: 10.9 x 8.4 x 8.8 Case Cube: 0.466 Cases / Pallet: 108 -
L616 – LIQUID WRENCH® WHITE LITHIUM GREASE
Package Contents: 10.25 OZ Case Weight: 12 Case Dimensions L x W x H: 11.13 x 8.38 x 8.5 Case Cube: 0.459 Cases / Pallet: 114 -
L616/4 – LIQUID WRENCH® WHITE LITHIUM GREASE
Package Contents: 10.25 OZ Case Weight: 4 Case Dimensions L x W x H: 6.5 x 5.81 x 8.38 Case Cube: 0.183 Cases / Pallet: 230 -
L666 – LIQUID WRENCH® WHITE LITHIUM GREASE
Package Contents: 16 OZ Case Weight: 14 Case Dimensions L x W x H: 19.13 x 14.38 x 4.38 Case Cube: 0.697 Cases / Pallet: 48 -
L711 – LIQUID WRENCH® CHAIN & CABLE LUBE
Package Contents: 11 OZ Case Weight: 12 Case Dimensions L x W x H: 10.9 x 8.4 x 8.8 Case Cube: 0.466 Cases / Pallet: 108 -
L803 – LIQUID WRENCH® DIELECTRIC ANTI-SEIZE
Package Contents: 3 OZ Case Weight: 2 Case Dimensions L x W x H: NA Case Cube: NA Cases / Pallet: 336 -
L808 – LIQUID WRENCH® ANTI-SEIZE LUBE
Package Contents: 8 OZ Case Weight: 8 Case Dimensions L x W x H: 10.5 x 7.94 x 5.56 Case Cube: 0.268 Cases / Pallet: 220 -
LC9/6 – LIQUID WRENCH® RUST INHIBITOR
Package Contents: 9 OZ Case Weight: 4.99 Case Dimensions L x W x H: 8.25 x 5.81 x 8.38 Case Cube: 0.232 Cases / Pallet: 185 -
LED411/6 – LIQUID WRENCH® PRO PENETRANT AND LUBRICANT
Package Contents: 11 Case Weight: 6 Case Dimensions L x W x H: 8.25 X 5.81 X 9.0 Case Cube: 0.25 Cases / Pallet: 148