Lubricants

Showing 1036–1080 of 3133 results

ENVIROLUBE XE 680 DRUM Open Gear Lubricants

Whitmore’s Envirolube XE is a proven, robust open gear lubricant used primarily on Ball Mills and Kilns. It is free of heavy metals and asphalt. Instead of asphalt, Envirolube XE contains a blend of high viscosity petroleum distillate, synthetic polymer and resins. The advantage over asphalt is that the spent lubricant does not harden over time. This greatly simplifies cleanup. Envirolube XE creates an effective layer of chemical and physical protection that prevents scuffing and pitting. The two opposing gears experience high load, but are prevented from damaging each other. Instead, the pressure causes the high points to yield, and they are compressed. The end result is radical improvement in surface smoothness. This process has been seen on both new and previously damaged gears. Smooth contacting surfaces are achieved without the use of a separate running-in product. Ideally, Envirolube should be sprayed intermittently onto the gears. This allows for partial evaporation of the solvent, resulting in a dramatic increase in the viscosity of the lubricant on the gears. For large, heavily loaded Ball Mill gears a lubrication frequency of 15 to 20 minutes is normal. BENEFITS: WEAR PROTECTION, SURFACE SMOOTHING - extends gear life and reduces operating expenses. The need for special running-in compounds is eliminated. GEAR INSPECTION – The brown coating is visible on the gear, but is transparent enough to allow for gear inspection using a strobe light. EASY CLEANUP - The non-asphaltic base remains soft. It flows readily from the gear guard and is easily removed. APPLICATIONS: Use on heavily loaded open gears such as Ball Mills and Kilns. The Medium and Heavy grades meet the specifications of Falk, FL Smidth and Metso Minerals. All grades are suitable for use in automatic lubrication systems using either drip tubes or spray nozzles. It is also suitable for use in airless spray systems.Size and Type Container: Drum Weight: 441 LBS
Envirolube XE Extreme Heavy Open Gear Lubricants
Price range: $317.30 through $16,354.74
EXTREME-SERVICE OPEN GEAR LUBRICANT - NONASPHALTIC Envirolube® XE Extreme is Whitmore's most recommended open gear lubricant. Created by adding proprietary anti-wear technology proven in enclosed-gear applications, Envirolube XE Extreme takes open-gear wear protection to a revolutionary level. A market leader in open-gear lubrication, Envirolube XE Extreme extends the life of even the most severely loaded open gears. This lubricant smooths existing wear damage, restoring a smooth operating surface and ensuring cost savings through reduced friction and wear. Envirolube XE Extreme creates an effective layer of chemical and physical protection that prevents micro-welding and scuffing. With this protective cushion in place, the high load on the gears causes the asperities to be pushed down, thus smoothing them with minimal removal of metal. Benefits WEAR PROTECTION, SURFACE SMOOTHING - extends gear life and reduces operating expenses. The need for special running-in compounds is eliminated. GEAR INSPECTION – The brown coating is visible on the gear,but is transparent enough to allow for gear inspection using a strobe light. EASY CLEANUP - The non-asphaltic base remains soft. It flows readily from the gear guard and is easily removed. TCLP-Safe – passes the EPA Toxicity Characteristic Leaching Procedure. The spent product is not considered a “characteristic hazardous waste”. Specifications Type: TCLP-Safe, Non-Asphaltic Open Gear Lubricant Grade: Medium, Heavy Base Material: Polymer Packaging: Pails, Kegs, Drums, Plastic Totes
Envirolube XE Extreme Medium Open Gear Lubricants
Price range: $333.98 through $3,613.49
EXTREME-SERVICE OPEN GEAR LUBRICANT - NONASPHALTIC Envirolube® XE Extreme is Whitmore's most recommended open gear lubricant. Created by adding proprietary anti-wear technology proven in enclosed-gear applications, Envirolube XE Extreme takes open-gear wear protection to a revolutionary level. A market leader in open-gear lubrication, Envirolube XE Extreme extends the life of even the most severely loaded open gears. This lubricant smooths existing wear damage, restoring a smooth operating surface and ensuring cost savings through reduced friction and wear. Envirolube XE Extreme creates an effective layer of chemical and physical protection that prevents micro-welding and scuffing. With this protective cushion in place, the high load on the gears causes the asperities to be pushed down, thus smoothing them with minimal removal of metal. Benefits WEAR PROTECTION, SURFACE SMOOTHING - extends gear life and reduces operating expenses. The need for special running-in compounds is eliminated. GEAR INSPECTION – The brown coating is visible on the gear,but is transparent enough to allow for gear inspection using a strobe light. EASY CLEANUP - The non-asphaltic base remains soft. It flows readily from the gear guard and is easily removed. TCLP-Safe – passes the EPA Toxicity Characteristic Leaching Procedure. The spent product is not considered a “characteristic hazardous waste”. Specifications Type: TCLP-Safe, Non-Asphaltic Open Gear Lubricant Grade: Medium, Heavy Base Material: Polymer Packaging: Pails, Kegs, Drums, Plastic Totes
ENVIROLUBE XE HEAVY DRUM Open Gear Lubricants

Whitmore’s Envirolube XE is a proven, robust open gear lubricant used primarily on Ball Mills and Kilns. It is free of heavy metals and asphalt. Instead of asphalt, Envirolube XE contains a blend of high viscosity petroleum distillate, synthetic polymer and resins. The advantage over asphalt is that the spent lubricant does not harden over time. This greatly simplifies cleanup. Envirolube XE creates an effective layer of chemical and physical protection that prevents scuffing and pitting. The two opposing gears experience high load, but are prevented from damaging each other. Instead, the pressure causes the high points to yield, and they are compressed. The end result is radical improvement in surface smoothness. This process has been seen on both new and previously damaged gears. Smooth contacting surfaces are achieved without the use of a separate running-in product. Ideally, Envirolube should be sprayed intermittently onto the gears. This allows for partial evaporation of the solvent, resulting in a dramatic increase in the viscosity of the lubricant on the gears. For large, heavily loaded Ball Mill gears a lubrication frequency of 15 to 20 minutes is normal. BENEFITS: WEAR PROTECTION, SURFACE SMOOTHING - extends gear life and reduces operating expenses. The need for special running-in compounds is eliminated. GEAR INSPECTION – The brown coating is visible on the gear, but is transparent enough to allow for gear inspection using a strobe light. EASY CLEANUP - The non-asphaltic base remains soft. It flows readily from the gear guard and is easily removed. APPLICATIONS: Use on heavily loaded open gears such as Ball Mills and Kilns. The Medium and Heavy grades meet the specifications of Falk, FL Smidth and Metso Minerals. All grades are suitable for use in automatic lubrication systems using either drip tubes or spray nozzles. It is also suitable for use in airless spray systems.Size and Type Container: Drum Weight: 446 LBS
ENVIROLUBE XE HEAVY KEG Open Gear Lubricants

Whitmore’s Envirolube XE is a proven, robust open gear lubricant used primarily on Ball Mills and Kilns. It is free of heavy metals and asphalt. Instead of asphalt, Envirolube XE contains a blend of high viscosity petroleum distillate, synthetic polymer and resins. The advantage over asphalt is that the spent lubricant does not harden over time. This greatly simplifies cleanup. Envirolube XE creates an effective layer of chemical and physical protection that prevents scuffing and pitting. The two opposing gears experience high load, but are prevented from damaging each other. Instead, the pressure causes the high points to yield, and they are compressed. The end result is radical improvement in surface smoothness. This process has been seen on both new and previously damaged gears. Smooth contacting surfaces are achieved without the use of a separate running-in product. Ideally, Envirolube should be sprayed intermittently onto the gears. This allows for partial evaporation of the solvent, resulting in a dramatic increase in the viscosity of the lubricant on the gears. For large, heavily loaded Ball Mill gears a lubrication frequency of 15 to 20 minutes is normal. BENEFITS: WEAR PROTECTION, SURFACE SMOOTHING - extends gear life and reduces operating expenses. The need for special running-in compounds is eliminated. GEAR INSPECTION – The brown coating is visible on the gear, but is transparent enough to allow for gear inspection using a strobe light. EASY CLEANUP - The non-asphaltic base remains soft. It flows readily from the gear guard and is easily removed. APPLICATIONS: Use on heavily loaded open gears such as Ball Mills and Kilns. The Medium and Heavy grades meet the specifications of Falk, FL Smidth and Metso Minerals. All grades are suitable for use in automatic lubrication systems using either drip tubes or spray nozzles. It is also suitable for use in airless spray systems.Size and Type Container: Keg Weight: 134 LBS
ENVIROLUBE XE HEAVY Liner KEG Open Gear Lubricants
$941.22
Whitmore’s Envirolube XE is a proven, robust open gear lubricant used primarily on Ball Mills and Kilns. It is free of heavy metals and asphalt. Instead of asphalt, Envirolube XE contains a blend of high viscosity petroleum distillate, synthetic polymer and resins. The advantage over asphalt is that the spent lubricant does not harden over time. This greatly simplifies cleanup. Envirolube XE creates an effective layer of chemical and physical protection that prevents scuffing and pitting. The two opposing gears experience high load, but are prevented from damaging each other. Instead, the pressure causes the high points to yield, and they are compressed. The end result is radical improvement in surface smoothness. This process has been seen on both new and previously damaged gears. Smooth contacting surfaces are achieved without the use of a separate running-in product. Ideally, Envirolube should be sprayed intermittently onto the gears. This allows for partial evaporation of the solvent, resulting in a dramatic increase in the viscosity of the lubricant on the gears. For large, heavily loaded Ball Mill gears a lubrication frequency of 15 to 20 minutes is normal. BENEFITS: WEAR PROTECTION, SURFACE SMOOTHING - extends gear life and reduces operating expenses. The need for special running-in compounds is eliminated. GEAR INSPECTION – The brown coating is visible on the gear, but is transparent enough to allow for gear inspection using a strobe light. EASY CLEANUP - The non-asphaltic base remains soft. It flows readily from the gear guard and is easily removed. APPLICATIONS: Use on heavily loaded open gears such as Ball Mills and Kilns. The Medium and Heavy grades meet the specifications of Falk, FL Smidth and Metso Minerals. All grades are suitable for use in automatic lubrication systems using either drip tubes or spray nozzles. It is also suitable for use in airless spray systems.Size and Type Container: Keg Weight: 134 LBS
ENVIROLUBE XE HEAVY PAIL Open Gear Lubricants

Whitmore’s Envirolube XE is a proven, robust open gear lubricant used primarily on Ball Mills and Kilns. It is free of heavy metals and asphalt. Instead of asphalt, Envirolube XE contains a blend of high viscosity petroleum distillate, synthetic polymer and resins. The advantage over asphalt is that the spent lubricant does not harden over time. This greatly simplifies cleanup. Envirolube XE creates an effective layer of chemical and physical protection that prevents scuffing and pitting. The two opposing gears experience high load, but are prevented from damaging each other. Instead, the pressure causes the high points to yield, and they are compressed. The end result is radical improvement in surface smoothness. This process has been seen on both new and previously damaged gears. Smooth contacting surfaces are achieved without the use of a separate running-in product. Ideally, Envirolube should be sprayed intermittently onto the gears. This allows for partial evaporation of the solvent, resulting in a dramatic increase in the viscosity of the lubricant on the gears. For large, heavily loaded Ball Mill gears a lubrication frequency of 15 to 20 minutes is normal. BENEFITS: WEAR PROTECTION, SURFACE SMOOTHING - extends gear life and reduces operating expenses. The need for special running-in compounds is eliminated. GEAR INSPECTION – The brown coating is visible on the gear, but is transparent enough to allow for gear inspection using a strobe light. EASY CLEANUP - The non-asphaltic base remains soft. It flows readily from the gear guard and is easily removed. APPLICATIONS: Use on heavily loaded open gears such as Ball Mills and Kilns. The Medium and Heavy grades meet the specifications of Falk, FL Smidth and Metso Minerals. All grades are suitable for use in automatic lubrication systems using either drip tubes or spray nozzles. It is also suitable for use in airless spray systems.Size and Type Container: Pail Weight: 38 LBS
ENVIROLUBE XE MEDIUM DRUM Open Gear Lubricants

Whitmore’s Envirolube XE is a proven, robust open gear lubricant used primarily on Ball Mills and Kilns. It is free of heavy metals and asphalt. Instead of asphalt, Envirolube XE contains a blend of high viscosity petroleum distillate, synthetic polymer and resins. The advantage over asphalt is that the spent lubricant does not harden over time. This greatly simplifies cleanup. Envirolube XE creates an effective layer of chemical and physical protection that prevents scuffing and pitting. The two opposing gears experience high load, but are prevented from damaging each other. Instead, the pressure causes the high points to yield, and they are compressed. The end result is radical improvement in surface smoothness. This process has been seen on both new and previously damaged gears. Smooth contacting surfaces are achieved without the use of a separate running-in product. Ideally, Envirolube should be sprayed intermittently onto the gears. This allows for partial evaporation of the solvent, resulting in a dramatic increase in the viscosity of the lubricant on the gears. For large, heavily loaded Ball Mill gears a lubrication frequency of 15 to 20 minutes is normal. BENEFITS: WEAR PROTECTION, SURFACE SMOOTHING - extends gear life and reduces operating expenses. The need for special running-in compounds is eliminated. GEAR INSPECTION – The brown coating is visible on the gear, but is transparent enough to allow for gear inspection using a strobe light. EASY CLEANUP - The non-asphaltic base remains soft. It flows readily from the gear guard and is easily removed. APPLICATIONS: Use on heavily loaded open gears such as Ball Mills and Kilns. The Medium and Heavy grades meet the specifications of Falk, FL Smidth and Metso Minerals. All grades are suitable for use in automatic lubrication systems using either drip tubes or spray nozzles. It is also suitable for use in airless spray systems.Size and Type Container: Drum Weight: 446 LBS
ENVIROLUBE XE MEDIUM KEG Open Gear Lubricants

Whitmore’s Envirolube XE is a proven, robust open gear lubricant used primarily on Ball Mills and Kilns. It is free of heavy metals and asphalt. Instead of asphalt, Envirolube XE contains a blend of high viscosity petroleum distillate, synthetic polymer and resins. The advantage over asphalt is that the spent lubricant does not harden over time. This greatly simplifies cleanup. Envirolube XE creates an effective layer of chemical and physical protection that prevents scuffing and pitting. The two opposing gears experience high load, but are prevented from damaging each other. Instead, the pressure causes the high points to yield, and they are compressed. The end result is radical improvement in surface smoothness. This process has been seen on both new and previously damaged gears. Smooth contacting surfaces are achieved without the use of a separate running-in product. Ideally, Envirolube should be sprayed intermittently onto the gears. This allows for partial evaporation of the solvent, resulting in a dramatic increase in the viscosity of the lubricant on the gears. For large, heavily loaded Ball Mill gears a lubrication frequency of 15 to 20 minutes is normal. BENEFITS: WEAR PROTECTION, SURFACE SMOOTHING - extends gear life and reduces operating expenses. The need for special running-in compounds is eliminated. GEAR INSPECTION – The brown coating is visible on the gear, but is transparent enough to allow for gear inspection using a strobe light. EASY CLEANUP - The non-asphaltic base remains soft. It flows readily from the gear guard and is easily removed. APPLICATIONS: Use on heavily loaded open gears such as Ball Mills and Kilns. The Medium and Heavy grades meet the specifications of Falk, FL Smidth and Metso Minerals. All grades are suitable for use in automatic lubrication systems using either drip tubes or spray nozzles. It is also suitable for use in airless spray systems.Size and Type Container: Keg Weight: 134 LBS
ENVIROLUBE XE MEDIUM PAIL Open Gear Lubricants

Whitmore’s Envirolube XE is a proven, robust open gear lubricant used primarily on Ball Mills and Kilns. It is free of heavy metals and asphalt. Instead of asphalt, Envirolube XE contains a blend of high viscosity petroleum distillate, synthetic polymer and resins. The advantage over asphalt is that the spent lubricant does not harden over time. This greatly simplifies cleanup. Envirolube XE creates an effective layer of chemical and physical protection that prevents scuffing and pitting. The two opposing gears experience high load, but are prevented from damaging each other. Instead, the pressure causes the high points to yield, and they are compressed. The end result is radical improvement in surface smoothness. This process has been seen on both new and previously damaged gears. Smooth contacting surfaces are achieved without the use of a separate running-in product. Ideally, Envirolube should be sprayed intermittently onto the gears. This allows for partial evaporation of the solvent, resulting in a dramatic increase in the viscosity of the lubricant on the gears. For large, heavily loaded Ball Mill gears a lubrication frequency of 15 to 20 minutes is normal. BENEFITS: WEAR PROTECTION, SURFACE SMOOTHING - extends gear life and reduces operating expenses. The need for special running-in compounds is eliminated. GEAR INSPECTION – The brown coating is visible on the gear, but is transparent enough to allow for gear inspection using a strobe light. EASY CLEANUP - The non-asphaltic base remains soft. It flows readily from the gear guard and is easily removed. APPLICATIONS: Use on heavily loaded open gears such as Ball Mills and Kilns. The Medium and Heavy grades meet the specifications of Falk, FL Smidth and Metso Minerals. All grades are suitable for use in automatic lubrication systems using either drip tubes or spray nozzles. It is also suitable for use in airless spray systems.Size and Type Container: Pail Weight: 38 LBS
EUTECTIC GEAR OIL ISO 100 Drum Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Drum Weight: 448 LBS.
EUTECTIC GEAR OIL ISO 100 Pail Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS:INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles.APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Pail Weight: 38 LBS.
EUTECTIC GEAR OIL ISO 1000 Pail Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Pail Weight: 38 LBS.
EUTECTIC GEAR OIL ISO 150 Drum Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Drum Weight: 448 LBS.
EUTECTIC GEAR OIL ISO 1500 Drum Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Drum Weight: 456 LBS.
EUTECTIC GEAR OIL ISO 220 Drum Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Drum Weight: 448 LBS.
EUTECTIC GEAR OIL ISO 220 Pail Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Pail Weight: 38 LBS.
EUTECTIC GEAR OIL ISO 320 Drum Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Drum Weight: 448 LBS.
EUTECTIC GEAR OIL ISO 320 Pail Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Pail Weight: 38 LBS.
EUTECTIC GEAR OIL ISO 460 Drum Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Drum Weight: 448 LBS.
EUTECTIC GEAR OIL ISO 460 Pail Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Pail Weight: 38 LBS.
EUTECTIC GEAR OIL ISO 500 Drum Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Drum Weight: 448 LBS.
EUTECTIC GEAR OIL ISO 5000 Drum Enclosed Gear Oils
$2,300.97
Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Drum Weight: 456 LBS.
EUTECTIC GEAR OIL ISO 5000 Pail Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Pail Weight: 38 LBS.
EUTECTIC GEAR OIL ISO 680 Drum Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Drum Weight: 448 LBS.
EUTECTIC GEAR OIL ISO 680 Pail Enclosed Gear Oils

Eutectic gear oil is formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The anti-wear additive system used in Eutectic gear oil stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Eutectic gear oil will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Eutectic gear oil. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur, especially where there is misalignment. Eutectic gear oils are not lapping compounds and do not contain any solid materials. BENEFITS: INNOVATIVE ADDITIVE CHEMISTRY – promotes rapid runin and smoothing of contact surfaces. ENVIRONMENTALLY SAFE - free from stringent storage and disposal requirements of the EPA Hazardous Waste Law. EXTENDED DRAIN INTERVALS – greatly reduced sludge and wear particles. APPLICATIONS: Eutectic enclosed gear oils may be used in any gearbox where extreme pressure additives are recommended. They are especially recommended for units operating under very high load, shock load, or reversing action. Also recommended for gears which have previously been wear-damaged. Eutectic 5000 is recommended for open gears of sugar mills, kilns and dryers, especially where lubrication is by dip system or oiler wheel. All viscosity grades of Eutectic meet the requirements of DIN 51517-3. Size and Type Container: Pail Weight: 38 LBS.
FIRE RESISTANT HYDRAULIC OIL Drum Hydraulic Oils

FIRE RESISTANT HYDRAULIC OIL Drum Hydraulic OilsSize and Type Container: Drum Weight: 503 LBS.
FLUSHING OIL Drum Enclosed Gear Oils

FLUSHING OIL Drum Enclosed Gear OilsSize and Type Container: Drum Weight: 448 LBS.
FLUSHING OIL Pail Enclosed Gear Oils

FLUSHING OIL Pail Enclosed Gear OilsSize and Type Container: Pail Weight: 38 LBS.
FRACTASTIC- HD-330 – Lubchem FRACTASTIC HD Frac Pump Packing Lube – 330 gal Tote

FRACTASTIC HD is formulated to provide superior protection of frac pumps in severe frac service conditions. It is formulated from a proprietary blend of highly refined mineral oils, VI improvers, and is compounded with select additives for excellent anti-wear, anti oxidation, corrosion inhibition, extreme pressure, and friction reduction properties. The design will protect rod and packing materials including steel, brass, Kevlar, rubber, graphite, Teflon, and etc. Thermally stable - Minimal degradation, Long service life High film strength - Exceptional EP performance protects against premature failure Advanced water separation -Excellent antifoam and demulsibility characteristics Rust and corrosion inhibited -Non-corrosive to yellow metals Protects rod and packing materials including steel, brass, Kevlar, rubber, graphite, Teflon, and etc. Excellent anti-wear properties Superior anti-oxidation properties Very Tacky to reduce splatter Applications: Use in frac pumps to protect rod and packing materials Typical Properties: Appearance: Blue Liquid Viscosity Index: 191 Pour Point, °C: -24 Flash Point, °C: 226 Specific Gravity: 0.853 TDS
FRACTASTIC- HD-40 – Lubchem FRACTASTIC HD Frac Pump Packing Lube – 40 lb Pail / 5 gal

FRACTASTIC HD is formulated to provide superior protection of frac pumps in severe frac service conditions. It is formulated from a proprietary blend of highly refined mineral oils, VI improvers, and is compounded with select additives for excellent anti-wear, anti oxidation, corrosion inhibition, extreme pressure, and friction reduction properties. The design will protect rod and packing materials including steel, brass, Kevlar, rubber, graphite, Teflon, and etc. Thermally stable - Minimal degradation, Long service life High film strength - Exceptional EP performance protects against premature failure Advanced water separation -Excellent antifoam and demulsibility characteristics Rust and corrosion inhibited -Non-corrosive to yellow metals Protects rod and packing materials including steel, brass, Kevlar, rubber, graphite, Teflon, and etc. Excellent anti-wear properties Superior anti-oxidation properties Very Tacky to reduce splatter Applications: Use in frac pumps to protect rod and packing materials Typical Properties: Appearance: Blue Liquid Viscosity Index: 191 Pour Point, °C: -24 Flash Point, °C: 226 Specific Gravity: 0.853 TDS
FRACTASTIC- HD-420 – Lubchem FRACTASTIC HD Frac Pump Packing Lube – 420 lb Barrel / 55 gal

FRACTASTIC HD is formulated to provide superior protection of frac pumps in severe frac service conditions. It is formulated from a proprietary blend of highly refined mineral oils, VI improvers, and is compounded with select additives for excellent anti-wear, anti oxidation, corrosion inhibition, extreme pressure, and friction reduction properties. The design will protect rod and packing materials including steel, brass, Kevlar, rubber, graphite, Teflon, and etc. Thermally stable - Minimal degradation, Long service life High film strength - Exceptional EP performance protects against premature failure Advanced water separation -Excellent antifoam and demulsibility characteristics Rust and corrosion inhibited -Non-corrosive to yellow metals Protects rod and packing materials including steel, brass, Kevlar, rubber, graphite, Teflon, and etc. Excellent anti-wear properties Superior anti-oxidation properties Very Tacky to reduce splatter Applications: Use in frac pumps to protect rod and packing materials Typical Properties: Appearance: Blue Liquid Viscosity Index: 191 Pour Point, °C: -24 Flash Point, °C: 226 Specific Gravity: 0.853 TDS
GearArmor PAIL Open Gear Lubricants

In the 1980's Whitmore pioneered the use of heavy duty pastetype open gear lubricants. We now introduce GearArmor, an open gear lubricant that provides improved protection, with unprecedented economy of use. Preventing wear on expensive components will always be the foremost "cost reduction" and Whitmore's GearArmor is effective in this regard, even under the highest load. However despite world class protection, GearArmor compares favorably with lower-performing asphaltic lubricants. GearArmor plates out on metal surfaces to create a dense dark film. The high concentration of solid lubricants (graphite, MoS2 and Whitmore's SL-Tech) provides a cushion of protection that minimizes metal-to-metal contact. Oil-soluble extreme pressure additives prevent scuffing by forming a slippery coating where asperities come in contact. The combined effect greatly exceeds the protection offering by lubricants that rely primarily on high viscosity. GearArmor promotes surface improvement as asperities are progressively smoothed down. The smoother surfaces minimize metal fatigue by spreading the load over a wider area. Reduced metal fatigue reduces the sub-surface cracking that leads to pitting. GearArmor is reinforced by the use of polymers. These promote cohesiveness, metal adhesion and water resistance. GearArmor is free of heavy metals, solvents and hazardous chemicals. It is an excellent replacement for any competitive gear grease as well as traditional open gear lubricants based on asphalt and solvent. Clean-up of the spent lubricant is easy. GearArmor is free of asphalt and does not leave a residue that hardens. BENEFITS: ECONOMY THROUGH WEAR PROTECTION – components last longer. ECONOMY OF USE – the cost of use per hour is competitive with lubricants based on asphalt and solvent. SAFETY – free of hazardous materials CLEAN UP – no hard residue to remove APPLICATIONS: Use GearArmor on the Open Gears, House Rollers and Dipper Sticks of Mining Machines. It is also suitable for protection of Drum Lagging and as a Wire Rope dressing. GearArmor is sufficiently robust for use on the Open Gears of large Ball Mills, as well as Kilns, Calciners and Rotary Dryers.Size and Type Container: Pail Weight: 38 LBS
GEARMATE 1000 AEROSOL Open Gear Lubricants

Whitmore's GearMate 1000 is specially formulated for use on open gears and other severe applications on draglines, mining shovels, ball mills and kilns. Whitmore's GearMate 1000 contains a high molecular weight polymer extender that resists drying, oxidation, and thermal decomposition. This is extremely helpful in areas of high dust contamination or when typical weather conditions can cause peeling and flaking from sticks, gears, and circle rails. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package. Whitmore's GearMate 1000 has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. The low temperature capabilities allow the lubricant film to maintain its adhesive characteristics and durable protection under the most demanding conditions. Meets the requirements of Caterpillar specification SD 4713. "Super Heavy" is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011). BENEFITS: TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. APPLICATIONS: Whitmore's GearMate 1000 is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, and bushings and large, heavily loaded bearings. GearMate 1000 is also highly recommended for use on open gears of kilns and ball mills.Approved by KOMATSU.Size and Type Container: CS Weight: 16 LBS
GEARMATE 1000 50CT CARTRIDGE Open Gear Lubricants

Whitmore's GearMate 1000 is specially formulated for use on open gears and other severe applications on draglines, mining shovels, ball mills and kilns. Whitmore's GearMate 1000 contains a high molecular weight polymer extender that resists drying, oxidation, and thermal decomposition. This is extremely helpful in areas of high dust contamination or when typical weather conditions can cause peeling and flaking from sticks, gears, and circle rails. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package. Whitmore's GearMate 1000 has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. The low temperature capabilities allow the lubricant film to maintain its adhesive characteristics and durable protection under the most demanding conditions. Meets the requirements of Caterpillar specification SD 4713. "Super Heavy" is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011). BENEFITS: TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. APPLICATIONS: Whitmore's GearMate 1000 is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, and bushings and large, heavily loaded bearings. GearMate 1000 is also highly recommended for use on open gears of kilns and ball mills.Approved by KOMATSU.Size and Type Container: CS Weight: 58 LBS
GEARMATE 1000 HEAVY DRUM Open Gear Lubricants

Whitmore's GearMate 1000 is specially formulated for use on open gears and other severe applications on draglines, mining shovels, ball mills and kilns. Whitmore's GearMate 1000 contains a high molecular weight polymer extender that resists drying, oxidation, and thermal decomposition. This is extremely helpful in areas of high dust contamination or when typical weather conditions can cause peeling and flaking from sticks, gears, and circle rails. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package. Whitmore's GearMate 1000 has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. The low temperature capabilities allow the lubricant film to maintain its adhesive characteristics and durable protection under the most demanding conditions. Meets the requirements of Caterpillar specification SD 4713. "Super Heavy" is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011). BENEFITS: TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. APPLICATIONS: Whitmore's GearMate 1000 is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, and bushings and large, heavily loaded bearings. GearMate 1000 is also highly recommended for use on open gears of kilns and ball mills. Approved by KOMATSU.Size and Type Container: Drum Weight: 466 LBS
GEARMATE 1000 HEAVY PAIL Open Gear Lubricants

Whitmore's GearMate 1000 is specially formulated for use on open gears and other severe applications on draglines, mining shovels, ball mills and kilns. Whitmore's GearMate 1000 contains a high molecular weight polymer extender that resists drying, oxidation, and thermal decomposition. This is extremely helpful in areas of high dust contamination or when typical weather conditions can cause peeling and flaking from sticks, gears, and circle rails. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package. Whitmore's GearMate 1000 has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. The low temperature capabilities allow the lubricant film to maintain its adhesive characteristics and durable protection under the most demanding conditions. Meets the requirements of Caterpillar specification SD 4713. "Super Heavy" is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011). BENEFITS: TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. APPLICATIONS: Whitmore's GearMate 1000 is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, and bushings and large, heavily loaded bearings. GearMate 1000 is also highly recommended for use on open gears of kilns and ball mills. Approved by KOMATSU.Size and Type Container: Pail Weight: 38 LBS
Gearmate 1000 ICT Arctic Drum Open Gear Lubricants
$1,634.15
EXTREME-SERVICE OPEN GEAR LUBRICANT GearMate® 1000 ICT is formulated for use on open gears and other severe open applications on draglines and mining shovels. It is also highly recommended for the open gears of kilns and ball mills, including the most severely loaded, also in the gearboxes of traction motors found on older locomotives. GearMate 1000 ICT meets the demand for an open gear lubricant that deposits a dark, non-transparent coating on metal. The dense black coating lets the operator know that the lubricant is in place at the right quantity. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high-performance wear resistance in an environmentally safe package. GearMate 1000 ICT has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. A specially selected polymer allows the lubricant film to maintain its adhesive characteristics under varying temperature conditions. PACKAGING Drums Benefits TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. Specifications Certifications: Meets the requirements of Caterpillar specification SD 4713. “Super Heavy” is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011). The Heavy grade has been approved by the Passenger Rail Agency of South Africa for use in traction motor gearboxes that use a semi-fluid grease. Type: Multiservice Open Gear Lubricant Grade: Arctic Base Material: Lithium Packaging: Drums APPLICATIONS: GearMate 1000 ICT is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, bushings and large, heavily loaded bearings. GearMate 1000 ICT is also highly suited for use on open gears of kilns, ball mill, and similar rotating equipment. It is especially recommended where high load and inadequate protection have resulted in pitting and scuffing of gears.
GEARMATE 1000 ICT HEAVY CAULK Open Gear Lubricants

GearMate 1000 ICT is formulated for use on open gears and other severe applications on draglines and mining shovels. It is also highly recommended for the open gears of kilns and ball mills, including the most severely loaded. Whitmore introduced the "ICT" (improved coating technology) version of GearMate 1000 in order to meet the demand for an open gear lubricant that deposits a darker, non-transparent coating on metal, and also meets the Caterpillar (formerly Bucyrus International) specification SD 4713. The dense black coating lets the operator know that the lubricant is in place at the right quantity. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package. Whitmore's GearMate 1000 ICT has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. The low temperature capabilities allow the lubricant film to maintain its adhesive characteristics and durable protection under the most demanding conditions. Meets the requirements of Caterpillar specification SD 4713. "Super Heavy" is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011).BENEFITS: TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. APPLICATIONS: Whitmore's GearMate 1000 ICT is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, bushings and large, heavily loaded bearings. GearMate 1000 ICT is also highly suited for use on open gears of kilns, ball mill, and similar rotating equipment. It is especially recommended where high load and inadequate protection has resulted in pitting and scuffing of gears.Size and Type Container: Pail Weight: 38 LBS
GEARMATE 1000 ICT HEAVY DRUM Open Gear Lubricants
$2,861.09
GearMate 1000 ICT is formulated for use on open gears and other severe applications on draglines and mining shovels. It is also highly recommended for the open gears of kilns and ball mills, including the most severely loaded. Whitmore introduced the "ICT" (improved coating technology) version of GearMate 1000 in order to meet the demand for an open gear lubricant that deposits a darker, non-transparent coating on metal, and also meets the Caterpillar (formerly Bucyrus International) specification SD 4713. The dense black coating lets the operator know that the lubricant is in place at the right quantity. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package. Whitmore's GearMate 1000 ICT has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. The low temperature capabilities allow the lubricant film to maintain its adhesive characteristics and durable protection under the most demanding conditions. Meets the requirements of Caterpillar specification SD 4713. "Super Heavy" is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011).BENEFITS: TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. APPLICATIONS: Whitmore's GearMate 1000 ICT is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, bushings and large, heavily loaded bearings. GearMate 1000 ICT is also highly suited for use on open gears of kilns, ball mill, and similar rotating equipment. It is especially recommended where high load and inadequate protection has resulted in pitting and scuffing of gears.Size and Type Container: Drum Weight: 466 LBS
Gearmate 1000 ICT Heavy Keg Open Gear Lubricants
$946.85
GearMate 1000 ICT is formulated for use on open gears and other severe applications on draglines and mining shovels. It is also highly recommended for the open gears of kilns and ball mills, including the most severely loaded. Whitmore introduced the "ICT" (improved coating technology) version of GearMate 1000 in order to meet the demand for an open gear lubricant that deposits a darker, non-transparent coating on metal, and also meets the Caterpillar (formerly Bucyrus International) specification SD 4713. The dense black coating lets the operator know that the lubricant is in place at the right quantity. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package. Whitmore's GearMate 1000 ICT has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. The low temperature capabilities allow the lubricant film to maintain its adhesive characteristics and durable protection under the most demanding conditions. Meets the requirements of Caterpillar specification SD 4713. "Super Heavy" is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011). BENEFITS: TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. APPLICATIONS: Whitmore's GearMate 1000 ICT is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, bushings and large, heavily loaded bearings. GearMate 1000 ICT is also highly suited for use on open gears of kilns, ball mill, and similar rotating equipment. It is especially recommended where high load and inadequate protection has resulted in pitting and scuffing of gears. Size and Type Container: Keg Weight: 133 LBS
GEARMATE 1000 ICT HEAVY PAIL Open Gear Lubricants
$237.59
GearMate 1000 ICT is formulated for use on open gears and other severe applications on draglines and mining shovels. It is also highly recommended for the open gears of kilns and ball mills, including the most severely loaded. Whitmore introduced the "ICT" (improved coating technology) version of GearMate 1000 in order to meet the demand for an open gear lubricant that deposits a darker, non-transparent coating on metal, and also meets the Caterpillar (formerly Bucyrus International) specification SD 4713. The dense black coating lets the operator know that the lubricant is in place at the right quantity. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package. Whitmore's GearMate 1000 ICT has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. The low temperature capabilities allow the lubricant film to maintain its adhesive characteristics and durable protection under the most demanding conditions. Meets the requirements of Caterpillar specification SD 4713. "Super Heavy" is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011).BENEFITS: TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. APPLICATIONS: Whitmore's GearMate 1000 ICT is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, bushings and large, heavily loaded bearings. GearMate 1000 ICT is also highly suited for use on open gears of kilns, ball mill, and similar rotating equipment. It is especially recommended where high load and inadequate protection has resulted in pitting and scuffing of gears.Size and Type Container: CS Weight: 20 LBS
Gearmate 1000 ICT Heavy Tote Open Gear Lubricants
$13,944.68
GearMate 1000 ICT is formulated for use on open gears and other severe applications on draglines and mining shovels. It is also highly recommended for the open gears of kilns and ball mills, including the most severely loaded. Whitmore introduced the "ICT" (improved coating technology) version of GearMate 1000 in order to meet the demand for an open gear lubricant that deposits a darker, non-transparent coating on metal, and also meets the Caterpillar (formerly Bucyrus International) specification SD 4713. The dense black coating lets the operator know that the lubricant is in place at the right quantity. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package. Whitmore's GearMate 1000 ICT has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. The low temperature capabilities allow the lubricant film to maintain its adhesive characteristics and durable protection under the most demanding conditions. Meets the requirements of Caterpillar specification SD 4713. "Super Heavy" is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011). BENEFITS: TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. APPLICATIONS: Whitmore's GearMate 1000 ICT is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, bushings and large, heavily loaded bearings. GearMate 1000 ICT is also highly suited for use on open gears of kilns, ball mill, and similar rotating equipment. It is especially recommended where high load and inadequate protection has resulted in pitting and scuffing of gears. Size and Type Container: Tote Weight: 2225 LBS
GEARMATE 1000 ICT LIGHT DRUM Open Gear Lubricants
$3,513.32
GearMate 1000 ICT is formulated for use on open gears and other severe applications on draglines and mining shovels. It is also highly recommended for the open gears of kilns and ball mills, including the most severely loaded. Whitmore introduced the "ICT" (improved coating technology) version of GearMate 1000 in order to meet the demand for an open gear lubricant that deposits a darker, non-transparent coating on metal, and also meets the Caterpillar (formerly Bucyrus International) specification SD 4713. The dense black coating lets the operator know that the lubricant is in place at the right quantity. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package. Whitmore's GearMate 1000 ICT has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. The low temperature capabilities allow the lubricant film to maintain its adhesive characteristics and durable protection under the most demanding conditions. Meets the requirements of Caterpillar specification SD 4713. "Super Heavy" is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011). BENEFITS: TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. APPLICATIONS: Whitmore's GearMate 1000 ICT is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, bushings and large, heavily loaded bearings. GearMate 1000 ICT is also highly suited for use on open gears of kilns, ball mill, and similar rotating equipment. It is especially recommended where high load and inadequate protection has resulted in pitting and scuffing of gears.Size and Type Container: Drum Weight: 461 LBS
Gearmate 1000 ICT Light Keg Open Gear Lubricants
$1,123.70
GearMate 1000 ICT is formulated for use on open gears and other severe applications on draglines and mining shovels. It is also highly recommended for the open gears of kilns and ball mills, including the most severely loaded. Whitmore introduced the "ICT" (improved coating technology) version of GearMate 1000 in order to meet the demand for an open gear lubricant that deposits a darker, non-transparent coating on metal, and also meets the Caterpillar (formerly Bucyrus International) specification SD 4713. The dense black coating lets the operator know that the lubricant is in place at the right quantity. Whitmore's blend of solid and oil-soluble anti-wear additives provides superior load carrying ability and high performance wear resistance in an environmentally safe package. Whitmore's GearMate 1000 ICT has a thickener structure that inherently resists emulsification with water and has excellent mechanical and thermal stability. The low temperature capabilities allow the lubricant film to maintain its adhesive characteristics and durable protection under the most demanding conditions. Meets the requirements of Caterpillar specification SD 4713. "Super Heavy" is suitable for CAT Shovel Hoist Drum Gears (specification SD 4713 revision June 2011). BENEFITS: TCLP-SAFE - passes the EPA Toxicity Characteristic Leaching Procedure. This means that the product is free of heavy metals and ozone-depleting solvents. WILL NOT EMULSIFY IN WATER - ideal for applications and components exposed to rain, ice, and snow. EXTREME LOAD-CARRYING ABILITY - protects during shock loading against scuffing and seizure. REDUCED INVENTORY – in many climates a single grade can be used year-round. APPLICATIONS: Whitmore's GearMate 1000 ICT is recommended for a variety of applications on mining draglines and shovels including open gears, sticks, circle rails and rollers, bushings and large, heavily loaded bearings. GearMate 1000 ICT is also highly suited for use on open gears of kilns, ball mill, and similar rotating equipment. It is especially recommended where high load and inadequate protection has resulted in pitting and scuffing of gears. Size and Type Container: Keg Weight: 133 LBS

ENVIROLUBE XE 680 DRUM Open Gear Lubricants

Envirolube XE Extreme Heavy Open Gear Lubricants

Envirolube XE Extreme Medium Open Gear Lubricants

ENVIROLUBE XE HEAVY DRUM Open Gear Lubricants

ENVIROLUBE XE HEAVY KEG Open Gear Lubricants

ENVIROLUBE XE HEAVY Liner KEG Open Gear Lubricants

ENVIROLUBE XE HEAVY PAIL Open Gear Lubricants

ENVIROLUBE XE MEDIUM DRUM Open Gear Lubricants

ENVIROLUBE XE MEDIUM KEG Open Gear Lubricants

ENVIROLUBE XE MEDIUM PAIL Open Gear Lubricants

EUTECTIC GEAR OIL ISO 100 Drum Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 100 Pail Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 1000 Pail Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 150 Drum Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 1500 Drum Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 220 Drum Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 220 Pail Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 320 Drum Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 320 Pail Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 460 Drum Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 460 Pail Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 500 Drum Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 5000 Drum Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 5000 Pail Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 680 Drum Enclosed Gear Oils

EUTECTIC GEAR OIL ISO 680 Pail Enclosed Gear Oils

FIRE RESISTANT HYDRAULIC OIL Drum Hydraulic Oils

FLUSHING OIL Drum Enclosed Gear Oils

FLUSHING OIL Pail Enclosed Gear Oils

FRACTASTIC- HD-330 – Lubchem FRACTASTIC HD Frac Pump Packing Lube – 330 gal Tote

FRACTASTIC- HD-40 – Lubchem FRACTASTIC HD Frac Pump Packing Lube – 40 lb Pail / 5 gal

FRACTASTIC- HD-420 – Lubchem FRACTASTIC HD Frac Pump Packing Lube – 420 lb Barrel / 55 gal

GearArmor PAIL Open Gear Lubricants

GEARMATE 1000 AEROSOL Open Gear Lubricants

GEARMATE 1000 50CT CARTRIDGE Open Gear Lubricants

GEARMATE 1000 HEAVY DRUM Open Gear Lubricants

GEARMATE 1000 HEAVY PAIL Open Gear Lubricants

Gearmate 1000 ICT Arctic Drum Open Gear Lubricants

GEARMATE 1000 ICT HEAVY CAULK Open Gear Lubricants

GEARMATE 1000 ICT HEAVY DRUM Open Gear Lubricants

Gearmate 1000 ICT Heavy Keg Open Gear Lubricants

GEARMATE 1000 ICT HEAVY PAIL Open Gear Lubricants

Gearmate 1000 ICT Heavy Tote Open Gear Lubricants

GEARMATE 1000 ICT LIGHT DRUM Open Gear Lubricants

Gearmate 1000 ICT Light Keg Open Gear Lubricants