Lubricants

Whitmore's Citrus Select dissolves grease and removes dirt. It is a heavy-duty industrial / commercial cleaner and degreaser in an ozone-safe aerosol spray. It is a special blend based on the natural solvents that are extracted from citrus fruits. Citrus Select rapidly dissolves built-up grease, oil, waxes, tars, paint and grime. Spray Citrus Select directly on surface to be cleaned. If necessary, allow some soak time. Wipe clean. Citrus Select instantly releases brake dust and grease from vehicle wheels, allowing for easy cleaning with water spray. Citrus Select does not contain any acids or alkalis, so it will not corrode or damage metal surfaces. It is ideal for use as a prewashing agent on work clothes to break up grease deposits. Spray directly onto greasy areas prior to washing. Whitmore’s Citrus Select is biodegradable. Its natural citrus base allows for control of unpleasant odors in a variety of environments. Spray Citrus Select directly on the surface to be cleaned. If necessary, allow some soak time. Wipe clean. Citrus Select is especially useful for cleaning built-up greasy grime from areas that have not been part of a regular cleaning regimen. BENEFITS: PLEASANT ODOR - natural citrus base BIODEGRADABLE - no concerns about sewer systems, or damage to ozone. QUICK AND EFFECTIVE – reduced labor APPLICATIONS: Glass - Metal Wood - Plastic Tabletops - Desktops Work Stations - Product Equipment Tools and Finished Components - Walls Doors - Chairs Handrails - Cabinets Computers - Keyboards Vehicle Surfaces - Wheels Elevator Metal - Glass or Wood Interior Surfaces Room Deodorizer - Stained White Marker Boards Pretreatment of Stained Clothing CAUTION - COMBUSTIBLE Contents under pressure or exposure to heat may cause container to burst. Do not spray near heat, sparks, or open flame. Do not puncture or incinerate on stove above 120°F (49°C) KEEP OUT OF REACH OF CHILDREN. Before using on vinyl, leather or wood, check for compatibility on an inconspicuous area.Size and Type Container: CS Weight: 13 LBS

Whitmore's Claret enclosed gear oils have been formulated to meet the unique demands of heavily loaded, industrial gearing systems. Claret contains molybdenum disulfide, a colloidal lubricant which provides extreme pressure protection under severe load and shock load. Anti-wear and extreme pressure protection are assured with Claret, even under boundary lubrication conditions. Claret is suitable for use in both steel-on-steel and steel-on-bronze applications such as worm gears. It may also be used to replace compounded oils in many applications. Claret oils feature long-lasting, anti-foaming protection which aids in reducing wear, lowering operating temperatures and protecting seals. The blend of carefully selected base stocks provides excellent oxidation stability and extended service life of the lubricant. All viscosity grades of Claret meet the requirements of DIN 51517-3. BENEFITS: SOLID LUBRICANTS - contains molybdenum disulfide for extreme pressure protection under severe load and shock load. ANTI-WEAR - protects even under severe conditions to extend gear life. ANTI-FOAM - extends oil life, reduces wear, protects seals and lowers temperatures. VERSATILE - suitable for all enclosed gear systems which require an EP oil, even worm gearing. OXIDATION RESISTANT - provides longer service intervals with fewer changeouts. APPLICATIONS: Claret was specifically formulated for enclosed gear driven pulverizers and other severe gearing applications found in mining equipment, power plants, steel mills, cement plants and other industries. Meets U.S. Steel 224 and AGMA 9005-D94 specifications Size and Type Container: Pail Weight: 38 LBS.

Whitmore's Claret enclosed gear oils have been formulated to meet the unique demands of heavily loaded, industrial gearing systems. Claret contains molybdenum disulfide, a colloidal lubricant which provides extreme pressure protection under severe load and shock load. Anti-wear and extreme pressure protection are assured with Claret, even under boundary lubrication conditions. Claret is suitable for use in both steel-on-steel and steel-on-bronze applications such as worm gears. It may also be used to replace compounded oils in many applications. Claret oils feature long-lasting, anti-foaming protection which aids in reducing wear, lowering operating temperatures and protecting seals. The blend of carefully selected base stocks provides excellent oxidation stability and extended service life of the lubricant. All viscosity grades of Claret meet the requirements of DIN 51517-3. BENEFITS: SOLID LUBRICANTS - contains molybdenum disulfide for extreme pressure protection under severe load and shock load. ANTI-WEAR - protects even under severe conditions to extend gear life. ANTI-FOAM - extends oil life, reduces wear, protects seals and lowers temperatures. VERSATILE - suitable for all enclosed gear systems which require an EP oil, even worm gearing. OXIDATION RESISTANT - provides longer service intervals with fewer changeouts. APPLICATIONS: Claret was specifically formulated for enclosed gear driven pulverizers and other severe gearing applications found in mining equipment, power plants, steel mills, cement plants and other industries. Meets U.S. Steel 224 and AGMA 9005-D94 specifications Size and Type Container: Drum Weight: 448 LBS.

Whitmore's Claret enclosed gear oils have been formulated to meet the unique demands of heavily loaded, industrial gearing systems. Claret contains molybdenum disulfide, a colloidal lubricant which provides extreme pressure protection under severe load and shock load. Anti-wear and extreme pressure protection are assured with Claret, even under boundary lubrication conditions. Claret is suitable for use in both steel-on-steel and steel-on-bronze applications such as worm gears. It may also be used to replace compounded oils in many applications. Claret oils feature long-lasting, anti-foaming protection which aids in reducing wear, lowering operating temperatures and protecting seals. The blend of carefully selected base stocks provides excellent oxidation stability and extended service life of the lubricant. All viscosity grades of Claret meet the requirements of DIN 51517-3. BENEFITS: SOLID LUBRICANTS - contains molybdenum disulfide for extreme pressure protection under severe load and shock load. ANTI-WEAR - protects even under severe conditions to extend gear life. ANTI-FOAM - extends oil life, reduces wear, protects seals and lowers temperatures. VERSATILE - suitable for all enclosed gear systems which require an EP oil, even worm gearing. OXIDATION RESISTANT - provides longer service intervals with fewer changeouts. APPLICATIONS: Claret was specifically formulated for enclosed gear driven pulverizers and other severe gearing applications found in mining equipment, power plants, steel mills, cement plants and other industries. Meets U.S. Steel 224 and AGMA 9005-D94 specifications Size and Type Container: Pail Weight: 38 LBS.

Whitmore's Claret enclosed gear oils have been formulated to meet the unique demands of heavily loaded, industrial gearing systems. Claret contains molybdenum disulfide, a colloidal lubricant which provides extreme pressure protection under severe load and shock load. Anti-wear and extreme pressure protection are assured with Claret, even under boundary lubrication conditions. Claret is suitable for use in both steel-on-steel and steel-on-bronze applications such as worm gears. It may also be used to replace compounded oils in many applications. Claret oils feature long-lasting, anti-foaming protection which aids in reducing wear, lowering operating temperatures and protecting seals. The blend of carefully selected base stocks provides excellent oxidation stability and extended service life of the lubricant. All viscosity grades of Claret meet the requirements of DIN 51517-3. BENEFITS: SOLID LUBRICANTS - contains molybdenum disulfide for extreme pressure protection under severe load and shock load. ANTI-WEAR - protects even under severe conditions to extend gear life. ANTI-FOAM - extends oil life, reduces wear, protects seals and lowers temperatures. VERSATILE - suitable for all enclosed gear systems which require an EP oil, even worm gearing. OXIDATION RESISTANT - provides longer service intervals with fewer changeouts. APPLICATIONS: Claret was specifically formulated for enclosed gear driven pulverizers and other severe gearing applications found in mining equipment, power plants, steel mills, cement plants and other industries. Meets U.S. Steel 224 and AGMA 9005-D94 specifications Size and Type Container: Pail Weight: 38 LBS.

The primary features of this heavy-duty grease are tolerance for water and the ability to withstand heavy loads. Compass EP is a lithium-calcium grease, fortified with synthetic polymers that cause the grease to cling to metal and repel water, even at high pressure. When water does eventually get mixed into the body of the grease, the impact is less than with conventional grease. Compass EP contains additives that counteract the negative impact of water ingress. During standardized laboratory testing, water was mixed for 5,000 strokes; the degree of softening was then measured. There was no measurable effect on the consistency of the grease. Under this test, many greases become soft to the point of flowing. The ability of Compass EP to withstand extreme pressure is evidenced by the high weld point (500 kilograms) on the Four Ball machine. End users consistently report that Compass EP performs under load as well as greases that cost substantially more. BENEFITS: RESISTS WATER – keeps a protective film on metal. STABLE – retains its body under high load or when water enters. WEAR PROTECTION – contains molybdenum disulfide for protection under high load. PUMPABLE – can be used in automatic systems at low temperatures. APPLICATIONS: Recommended for slow and medium speed industrial bearings, especially those that are exposed to high load and/or water. Use in steel mills and other primary metal processing, pulp and paper operations, waste water treatment facilities, cement mills, rubber and plastics, marine applications, mining, logging, construction, etc. Size and Type Container: Drum Weight: 446 LBS.

The primary features of this heavy-duty grease are tolerance for water and the ability to withstand heavy loads. Compass EP is a lithium-calcium grease, fortified with synthetic polymers that cause the grease to cling to metal and repel water, even at high pressure. When water does eventually get mixed into the body of the grease, the impact is less than with conventional grease. Compass EP contains additives that counteract the negative impact of water ingress. During standardized laboratory testing, water was mixed for 5,000 strokes; the degree of softening was then measured. There was no measurable effect on the consistency of the grease. Under this test, many greases become soft to the point of flowing. The ability of Compass EP to withstand extreme pressure is evidenced by the high weld point (500 kilograms) on the Four Ball machine. End users consistently report that Compass EP performs under load as well as greases that cost substantially more. BENEFITS: RESISTS WATER – keeps a protective film on metal. STABLE – retains its body under high load or when water enters. WEAR PROTECTION – contains molybdenum disulfide for protection under high load. PUMPABLE – can be used in automatic systems at low temperatures. APPLICATIONS: Recommended for slow and medium speed industrial bearings, especially those that are exposed to high load and/or water. Use in steel mills and other primary metal processing, pulp and paper operations, waste water treatment facilities, cement mills, rubber and plastics, marine applications, mining, logging, construction, etc. Size and Type Container: Pail Weight: 38 LBS.

BESTOLIFE® Copper Supreme Special Blend® Plus (CSSB Plus) adds a proprietary corrosion inhibitor to the original CSSB formula, providing excellent storage protection in addition to its superior running capabilities. CSSB Plus guards against corrosion, resists washout, and will not harden or bleed excessively in storage. APPLICATIONS High temperature compound for drill collars and drill pipe with storage protection. Recommended for all drilling applications (rotary-shouldered connections), including high temperature environments. It is also effective for use on slides, jacking systems, cantilever type rigs and assemblies. TECHNICAL DATA CSSB Plus contains copper flake combined with a proprietary blend of amorphous and synthetic graphite, oxidation, corrosion, and H2S inhibitors, in a high temperature base grease. API and IADC tables for drill collars and drill pipe are minimum torque values. BESTOLIFE® recommends applying the friction factor to the optimum makeup torque to ensure maximum performance and protection when using BESTOLIFE® copper compounds. PRODUCT CHARACTERISTICS Color: Copper Penetration: (ASTM D217) 310-330 NLGI Grade: 1 Weight/Gallon: 10.2 pounds/gallon Thickener: Lithium Complex Dropping Point: (ASTM D2265) ≥500°F (≥260°C) Flash Point: 399°F (204°C) Brushable To: 15°F (-9°C) Service Rating: 600°F (316°C) Friction Factor: 1.15* Salt Spray Test: (ASTM B117) ≥2500 Hours Shelf Life: (Unopened container) 4 years Contains: Copper flake, synthetic and amorphous graphite and other nonmetallic additives Container Size: 3 1/2 gallon Container Weight: 30 pounds plastic INT'L PRODUCT NUMBER CONTAINER SIZE CONTAINER WEIGHT 635019 3 1/2 gallon 30 pounds metal IMDG   Safety Data Sheet Technical Data Sheet

BESTOLIFE® Copper Supreme Special Blend® Plus (CSSB Plus) adds a proprietary corrosion inhibitor to the original CSSB formula, providing excellent storage protection in addition to its superior running capabilities. CSSB Plus guards against corrosion, resists washout, and will not harden or bleed excessively in storage. APPLICATIONS High temperature compound for drill collars and drill pipe with storage protection. Recommended for all drilling applications (rotary-shouldered connections), including high temperature environments. It is also effective for use on slides, jacking systems, cantilever type rigs and assemblies. TECHNICAL DATA CSSB Plus contains copper flake combined with a proprietary blend of amorphous and synthetic graphite, oxidation, corrosion, and H2S inhibitors, in a high temperature base grease. API and IADC tables for drill collars and drill pipe are minimum torque values. BESTOLIFE® recommends applying the friction factor to the optimum makeup torque to ensure maximum performance and protection when using BESTOLIFE® copper compounds. PRODUCT CHARACTERISTICS Color: Copper Penetration: (ASTM D217) 310-330 NLGI Grade: 1 Weight/Gallon: 10.2 pounds/gallon Thickener: Lithium Complex Dropping Point: (ASTM D2265) ≥500°F (≥260°C) Flash Point: 399°F (204°C) Brushable To: 15°F (-9°C) Service Rating: 600°F (316°C) Friction Factor: 1.15* Salt Spray Test: (ASTM B117) ≥2500 Hours Shelf Life: (Unopened container) 4 years Contains: Copper flake, synthetic and amorphous graphite and other nonmetallic additives Container Size: 3 1/2 gallon Container Weight: 30 pounds plastic INT'L PRODUCT NUMBER CONTAINER SIZE CONTAINER WEIGHT 635084 5 gallon 50 pounds plastic IMDG 635085 5 gallon 50 pounds metal IMDG 635091 5 gallon 50 pounds plastic IATA   Safety Data Sheet Technical Data Sheet

DECATHLON AW HYDRAULIC 32 5-Gallon Pail Hydraulic OilsSize and Type Container: 5-Gallon Pail Weight: 38 LBS.

DECATHLON AW HYDRAULIC 46 55-Gallon Drum Hydraulic OilsSize and Type Container: 55-Gallon Drum Weight: 430 LBS.

Decathlon synthetic air compressor lubricants are manufactured from the finest synthetic hydrocarbon, diester and polyglycol fluids available. Decathlon synthetic air compressor fluids impart excellent resistance to oxidation demanded by the sophisticated air systems manufactured today. Decathlon synthetic fluids provide excellent low temperature characteristics while maintaining their stability at elevated temperatures. The HC Series fluids are acceptable for specific type rotary screw, centrifugal and reciprocating compressors. They are formulated with PAO's (polyalphaolefins) base stocks. The DE Series fluids are acceptable for specific type rotary and reciprocating compressors. They are formulated with diester base stocks. The PG Series fluids are acceptable for specific type rotary compressors only. They are formulated with polyglycol base stocks. Decathlon HC and DE are compatible with each other, and also with mineral oil. Decathlon PG is compatible with Decathlon DE, but incompatible with Decathlon HC and mineral oil. BENEFITS: REDUCED MAINTENANCE COSTS - excellent solvency eliminates harmful varnish and sludge deposits, reducing downtime. REDUCES CONSUMPTION - low volatility, superior oxidation resistance and sheer resistance, causing less viscosity breakdown means less lubricant leaving your system due to vapor formation. ENERGY SAVINGS - lower coefficients of friction and higher thermal stability reduce friction and result in reduced power consumption. OPERATING SAFETY - flash and auto-ignition temperatures are much higher than conventional petroleum products. This lowers the risk of fire and explosions commonly traced to high carbon deposits and excess lubrication. APPLICATIONS: Depending on your individual type of compressors and their OEM (Original Equipment Manufacturer) requirements, Whitmore can supply you with the right type of synthetic fluid. Size and Type Container: 55-Gallon Drum Weight: 478 LBS.