Heavy Machinery
Showing 25516–25560 of 26106 results
-
PM14663T – Muffler
Nelson Exhaust Parts - Mufflers -
PM14666855 – Interchange with John Deere Models 1517, 1518, and 2018
This CV driveline is not a direct replacement for the Welland CV drivelines, but an aftermarket alternative. Tractor yoke size: 1-3/8-in. x 21 SPLConstant-velocity driveline part number: PM14666855Implement clamp yoke size: 1-3/4-in. x 20 SPLConstant-velocity (CV) drivelines are fully assembled - ready to use. The clamp yoke and guard are included. The drivelines plug right in to popular Bush Hog™, Woods™, and Rhino™ flex-wing cutters. Patented lubrication system - Ensures positive one-shot lubrication to ball and socketPatented guard system - Complete coverage at 80 degrees full angleHigher capacity - 55 Series/Category 6 compared to most competitive 44 Series/Category 5Rolled splined shafting - Handles thrust, unlike offshore profile tube shafts -
PM14705551 – Interchange with Rhino Models SR-15 and SE-15
Tractor yoke size: 1-3/8-in. x 20 SPLConstant-velocity driveline part number: PM14705551Implement clamp yoke size: 1-3/4-in. x 20 SPLConstant-velocity (CV) drivelines are fully assembled - ready to use. The clamp yoke and guard are included. The drivelines plug right in to popular Bush Hog™, Woods™, and Rhino™ flex-wing cutters. Patented lubrication system - Ensures positive one-shot lubrication to ball and socketPatented guard system - Complete coverage at 80 degrees full angleHigher capacity - 55 Series/Category 6 compared to most competitive 44 Series/Category 5Rolled splined shafting - Handles thrust, unlike offshore profile tube shafts -
PM14705555 – Interchange with Bush Hog Models 2615 and 3615; Woods Models 3180 and 3240
Tractor yoke size: 1-3/8-in. x 20 SPLConstant-velocity driveline part number: PM14705555Implement clamp yoke size: 1-3/8-in. x 6 SPLConstant-velocity (CV) drivelines are fully assembled - ready to use. The clamp yoke and guard are included. The drivelines plug right in to popular Bush Hog™, Woods™, and Rhino™ flex-wing cutters. Patented lubrication system - Ensures positive one-shot lubrication to ball and socketPatented guard system - Complete coverage at 80 degrees full angleHigher capacity - 55 Series/Category 6 compared to most competitive 44 Series/Category 5Rolled splined shafting - Handles thrust, unlike offshore profile tube shafts -
PM14706851 – Metric driveline, 51-in.
80-degree CV Metric Drivelines for Nearly all Brands of Flex-Wing CuttersTractor yoke size: 1-3/4-in. x 20 SPL Implement clamp yoke size: 1-3/4-in. x 20 SPLConstant-velocity (CV) drivelines are fully assembled - ready to use. The clamp yoke and guard are included. The drivelines plug right in to popular Bush Hog™, Woods™, and Rhino™ flex-wing cutters. Patented lubrication system - Ensures positive one-shot lubrication to ball and socketPatented guard system - Complete coverage at 80 degrees full angleHigher capacity - 55 Series/Category 6 compared to most competitive 44 Series/Category 5Rolled splined shafting - Handles thrust, unlike offshore profile tube shafts -
PM14706855 – Metric driveline, 55-in.
80-degree CV Metric Drivelines for Nearly all Brands of Flex-Wing CuttersTractor yoke size: 1-3/4-in. x 20 SPL Implement clamp yoke size: 1-3/8-in. x 6 SPLConstant-velocity (CV) drivelines are fully assembled - ready to use. The clamp yoke and guard are included. The drivelines plug right in to popular Bush Hog™, Woods™, and Rhino™ flex-wing cutters. Patented lubrication system - Ensures positive one-shot lubrication to ball and socketPatented guard system - Complete coverage at 80 degrees full angleHigher capacity - 55 Series/Category 6 compared to most competitive 44 Series/Category 5Rolled splined shafting - Handles thrust, unlike offshore profile tube shafts -
PM14716855 – Metric driveline, 55-in.
80-degree CV Metric Drivelines for Nearly all Brands of Flex-Wing CuttersTractor yoke size: 1-3/4-in. x 20 SPL Implement clamp yoke size: 1-3/4-in. x 20 SPLConstant-velocity (CV) drivelines are fully assembled - ready to use. The clamp yoke and guard are included. The drivelines plug right in to popular Bush Hog™, Woods™, and Rhino™ flex-wing cutters. Patented lubrication system - Ensures positive one-shot lubrication to ball and socketPatented guard system - Complete coverage at 80 degrees full angleHigher capacity - 55 Series/Category 6 compared to most competitive 44 Series/Category 5Rolled splined shafting - Handles thrust, unlike offshore profile tube shafts -
PM14766855 – Interchange with John Deere Models 1517, 1518, and 2018
This CV driveline is not a direct replacement for the Welland CV drivelines, but an aftermarket alternative. Tractor yoke size: 1-3/8-in. x 20 SPLConstant-velocity driveline part number: PM14766855Implement clamp yoke size: 1-3/4-in. x 20 SPLConstant-velocity (CV) drivelines are fully assembled - ready to use. The clamp yoke and guard are included. The drivelines plug right in to popular Bush Hog™, Woods™, and Rhino™ flex-wing cutters. Patented lubrication system - Ensures positive one-shot lubrication to ball and socketPatented guard system - Complete coverage at 80 degrees full angleHigher capacity - 55 Series/Category 6 compared to most competitive 44 Series/Category 5Rolled splined shafting - Handles thrust, unlike offshore profile tube shafts -
PM14880 – Cold-Forged Hitch Pins
Dia., in. (cm): 0.625 (1.59) Usable length, in. (cm): 6.25 (15.88) Wt., lb. (kg): 0.8 (0.36) One-piece forged pin High-carbon steel Spring-wire handle Includes clip Zinc-plated Approximately 25 percent stronger than Grade 2 -
PM14890 – Cold-Forged Hitch Pins
Dia., in. (cm): 0.75 (1.91) Usable length, in. (cm): 6.25 (15.88) Wt., lb. (kg): 1.1 (0.50) One-piece forged pin High-carbon steel Spring-wire handle Includes clip Zinc-plated Approximately 25 percent stronger than Grade 2 -
PM15190 – Cold-Forged Hitch Pins
Dia., in. (cm): 0.5 (1.27) Usable length, in. (cm): 3.5 (8.89) Wt., lb. (kg): 0.4 (0.18) One-piece forged pin High-carbon steel Spring-wire handle Includes clip Zinc-plated Approximately 25 percent stronger than Grade 2 -
PM15200 – Cold-Forged Hitch Pins
Dia., in. (cm): 0.625 (1.59) Usable length, in. (cm): 4.25 (10.80) Wt., lb. (kg): 0.6 (0.27) One-piece forged pin High-carbon steel Spring-wire handle Includes clip Zinc-plated Approximately 25 percent stronger than Grade 2 -
PM15210 – Cold-Forged Hitch Pins
Dia., in. (cm): 0.75 (1.91) Usable length, in. (cm): 4.25 (10.80) Wt., lb. (kg): 0.9 (0.41) One-piece forged pin High-carbon steel Spring-wire handle Includes clip Zinc-plated Approximately 25 percent stronger than Grade 2 -
PM15289T – Muffler
Nelson Exhaust Parts - Mufflers -
PM16487T – Muffler
Nelson Exhaust Parts - Mufflers -
PM17704T – Muffler
Nelson Exhaust Parts - Mufflers -
PM17880 – Cold-Forged Hitch Pins
Dia., in. (cm): 0.875 (2.22) Usable length, in. (cm): 6.25 (15.88) Wt., lb. (kg): 1.5 (0.68) One-piece forged pin High-carbon steel Spring-wire handle Includes clip Zinc-plated Approximately 25 percent stronger than Grade 2 -
PM17890 – Cold-Forged Hitch Pins
Dia., in. (cm): 1 (2.54) Usable length, in. (cm): 6.25 (15.88) Wt., lb. (kg): 1.9 (0.86) One-piece forged pin High-carbon steel Spring-wire handle Includes clip Zinc-plated Approximately 25 percent stronger than Grade 2 -
PM18134 – Clevis, straight, 5/8-in. dia. pin, 3/4×3-3/4-in. body, 1-5/16-in opening
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 12,000 -
PM18158 – Clevis, straight, 1/2-in. dia. pin, 5/8×3-1/4-in. body, 7/8-in. opening chain size
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 6,000 -
PM18178 – Clevis, straight, 3/4-in. dia. pin, 7/8×3-1/4-in. body, 1-5/16-in. Opening
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 16,000 -
PM18187 – Clevis, straight, 3/4-in. dia. pin, 7/8×4-1/4-in. body, 1-5/16-in. Opening
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 16,000 -
PM18190 – Clevis, straight, 7/8-in. dia. pin, 15/16×4-5/8-in. body, 1-7/16-in. Opening
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 20,000 -
PM18195 – Clevis, straight, 1-in. dia. pin, 1×5-5/16-in. body, 2-1/8-in. Opening
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 25,000 -
PM18234 – Clevis, twisted, 5-8-in. dia. pin, 3/4×3-1/2-in.body, 1-5/16-in. Opening
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 12,000 -
PM18258 – Clevis, twisted, 1/2-in. dia. pin, 5/8×3-in. body, 7/8-in. Opening
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 6,000 -
PM18278 – Clevis, twisted, 3/4-in. dia. pin, 7/8×3-in. body, 1-5/16-in. Opening
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 16,000 -
PM18287 – Clevis, twisted, 3/4-in. dia. pin, 7/8×3-7/8-in. body, 1-5/16-in. Opening
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 16,000 -
PM18290 – Clevis, twisted, 7/8-in dia. pin, 15/16×4-1/4-in. body, 1-7/16-in. Opening
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 20,000 -
PM18295 – Clevis, twisted, 1-in. dia. pin, 1×5-in body, 2-1/8-in. Opening
Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity Max. WLL* (lb.): 25,000 -
PM18465 – Clevis, general purpose, 3/4×6-3/16-in. body, 2-1/2-in. Opening
Max. WLL* (lb.): 10,000 Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity -
PM18546: Clevis, utility, 1/4×7/8-in. body, 15/32-in. Opening
Max. WLL* (lb.): 1,000 Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity -
PM18547: Clevis, utility, 5/16×1-in. body, 17/32-in. Opening
Max. WLL* (lb.): 1,500 Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity -
PM18548: Clevis, utility, 3/8×1-1/4-in. body, 21/32-in. Opening
Max. WLL* (lb.): 2,000 Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity -
PM18549: Clevis, utility, 7/16×1-1/2-in body, 23/32-in. Opening
Max. WLL* (lb.): 3,000 Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity -
PM18550: Clevis, utility, 1/2×1-11/16-in. body, 13/16-in opening
Max. WLL* (lb.): 6,000 Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity -
PM18605: Clevis, double, 1/4- or 5/16-in. chain size
Max. WLL* (lb.): 4,700 One-piece, forged steel Heat treated Use with high test chain Black powder coated finish -
PM18606: Clevis, double, 3/8-in. chain size
Max. WLL* (lb.): 6,600 One-piece, forged steel Heat treated Use with high test chain Black powder coated finish -
PM18608: Clevis, double, 7/16- or 1/2-in. chain size
Max. WLL* (lb.): 11,300 One-piece, forged steel Heat treated Use with high test chain Black powder coated finish -
PM18647 – Clevis, screw pin
Size (in.): 5/16x1-1/4 Size (mm.): 7.94x31.75 Max. WLL* (lb.): 2,000 Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity -
PM18648 – Clevis, screw pin
Size (in.): 3/8x1-7/16 Size (mm.): 9.53x36.51 Max. WLL* (lb.): 3,000 Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity -
PM18649 – Clevis, screw pin
Size (in.): 7/16x1-11/16 Size (mm.): 11.11x42.9 Max. WLL* (lb.): 4,000 Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity -
PM18650 – Clevis, screw pin
Size (in.): 1/2x1-15/16 Size (mm.): 12.7x49.21 Max. WLL* (lb.): 6,500 Black powder-coated finish Zinc-plated pin and clip Forged for better consistency in strength, quality, and conformity -
PM18901T – Muffler
Nelson Exhaust Parts - Mufflers -
PM19503506 – Round Baler CV Driveline – Domestic – John Deere Tractor Half
80-Degree C.V. Round Baler DrivelinesTractor yoke size: 1-3/8-in. x 6 SPLImplement clamp yoke size: 1-11/16-in. x 20 SPLFeatures and benefitsDriveline tractor shaft half assemblyOne part number - PM19503506 - will replace the tractor shaft half assembly for round balers, including: Gehl, Case, Vermeer, Hesston and John DeerePM19503506 Driveline Tractor Shaft Half AssemblyTractor Yoke: 1-3/8-in. x 6 SplineShaft Half: 1-11/16-in. x 20 SplineOAL Compressed: 31-in.Fits: Gehl, John Deere, Case, Vermeer, Hesston and more