Blowers and Fans
Showing 226–270 of 274 results
-
Tempest DEWALT Flex Volt Li-Ion Battery 12Ah (240Wh)
$849.94DEWALT Flex Volt Li-Ion Battery 12Ah (240Wh) -
Tempest DEWALT Single-Bay Quick Charger for Batteries
$316.09DEWALT Single-Bay Quick Charger for Batteries -
Tempest Direct – Drive Gas Power Blower
Price range: $1,931.19 through $2,872.18Direct-Drive Gas Blower offers the ideal combination of value, performance, and durability. AIRFLEX COMPOSITION IMPELLER Uniquely designed impellers deliver maximum air volume (CFM), velocity, and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon the impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. WELDED STEEL ROLL CAGE FRAME Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. ERGONOMIC DESIGN The exclusive frame design makes it convenient to lift, carry, and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research, and experience to create the most ergonomic platform possible. FOOT OPERATED TILT ADJUSTMENT No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°. BEST IN CLASS GASOLINE ENGINES Our line of Direct-Drive positive pressure ventilation fans use only the best small engines the industry has to offer. All 16″ to 24″ PPV fans come available with your choice of either a Honda® GX Series or Briggs and Stratton® OHV engine. Both engines makes are known for their remarkable performance and unchallenged reliability. There’s no wrong choice between these two. GASOLINE ENGINES – PPA Gasoline-powered fans offer the highest CFM performance available. Ranging anywhere from 4.8 to 8.5 HP, these positive pressure ventilation fans are recommended for the implementation of Positive Pressure Attack (PPA) in residential structures. 8″ NON-PNEUMATIC WHEELS Extra-wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs, and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The positive pressure ventilation fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of blower while in operation is eliminated. The risk of getting clothing in PPV fan blades while kneeling to set brake levers is eliminated. TURBO 2000 SHROUD By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind. FLIP-UP/FOLD-DOWN HANDLE The exclusive full-width handle design makes pushing or pulling a positive pressure ventilation fan too and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. DUAL “WINNING STEP” No levers to set or knobs to tighten when setting the angle for PPV. Foot-operated adjustment is quick, easy, and secure. The dual step allows for adjustment with either foot. Four back and one forward tilt position. SAFETY GRILLE Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards. INFORMATION/SAFETY BAR Features a large section of durable, reflective material to dramatically increase the visibility of the blower from the front view and a full list of instructions on the back to allow for safe and effective use. CHARACTERISTICS Tempest Direct-Drive positive pressure ventilation fans offer the ideal combination of value, performance and durability. All models feature an overhead valve engine that delivers incredible reliability. The 18” and 21” Tempest Direct-Drive Power BlowersTM are the most popular PPV units in the world. The Most Popular Units in the World Perfect Combination in Value, Performance and Durability Available w/ Honda GX or Briggs and Stratton OHV Engines TYPE Positive Pressure Ventilation Fan, Cone Air Flow (CAF) DRIVE/MOTOR 16″ Models: Honda® GX160 OR Briggs & Stratton® OHV 550 18″ Models: Honda® GX160 OR Briggs & Stratton® OHV 950 21″ Models: Honda® GX200 OR Briggs & Stratton® OHV 950 24″ Models: Honda® GX200 OR Briggs & Stratton® OHV 950 BLADE 16″, 18″, 21″, or 24″ Diameter Assembly Made Up of AirFlex Fiberglass Reinforced Polyamide Blades SHROUD Turbo 2000 Design, Tapered Aluminum w/ Durable Powder-Coat Finish WHEELS 16″ Models: 6″ Non-Pneumatic w/ Steel Hubs 18″, 21″ and 24″ Models: 8″ Non-Pneumatic w/ Steel Hubs GRILLE Continuous Circular-Wound, External-Weld Steel Wire with 8 Tie Points for Additional Safety Meets UL & European CE Safety Standards FRAME Rugged, Lightweight, Square-Steel Tubing with Powder-Coat Finish VIBRATION DAMPENERS Steel-Reinforced Rubber and Welded Steel Spring Feet TILT Foot-Operated Tilt Mechanism 16” Models: Four Position Tilt, +10°, +5°, 0°, -5° 18”, 21”, 24” Models: Five Position Tilt, +15°, +10°, +5°, 0°, -5° Part No. Model No. Diameter HP CFM Dimensions (W” x D” x H”) Weight (lbs) Options 910-1100 DD-16-H-4.8 16" 4.8 12,008 20.50″ x 19.75″ x 21.75″ 79 lbs. Honda 910-1120 DD-18-H-4.8 18″ 4.8 14,773 22.75″ x 21.00″ x 24.25″ 85 lbs. Honda 910-1140 DD-21-H-5.5 21" 5.5 20,152 25.00″ x 21.00″ x 26.25″ 90 lbs. Honda 910-1160 DD-24-H-5.5 24" 5.5 19,606 28.00″ x 21.00″ x 30.00″ 99 lbs. Honda 910-1101 DD-16-B-3.5 16" 3.5 11,514 20.50″ x 19.75″ x 21.75″ 73 lbs. Briggs & Stratton 910-1121 DD-18-B-5.5 18" 5.5 14,341 23.50″ x 21.00″ x 25.00″ 83 lbs. Briggs & Stratton 910-1141 DD-21-B-5.5 21" 5.5 18,025 25.50″ x 21.00″ x 26.25″ 87 lbs. Briggs & Stratton 910-1161 DD-24-B-5.5 24" 5.5 19,232 28.00″ x 21.00″ x 30.00″ 97 lbs. Briggs & Stratton -
Tempest Door Bar Holder
$472.05EB-16-S Accessories -
Tempest Ducting – Suction and Ventilation
$1,630.03Ducting - Suction and Ventilation - 45cm x 5 M (18" x 16 Feet) -
Tempest Ducting Hose Adapter – Yellow – Clip On
$317.82EB-16-S Accessories -
Tempest Dust Collector
Price range: $167.39 through $208.42Dust Collector -
Tempest Dust Containment Kit
Price range: $3,403.01 through $3,459.08Turn your Tempest fan into a powerful dust containment system. Connect the included Dust Containment Bag with the Ratchet Tie-Down Strap and place the fan near the source of the dust production. The airborne particulates are sucked into the fan’s powerful air track and trapped in the attached dust containment bag which can be conveniently emptied when desired. Made in the USA. Turn your Tempest fan into a powerful dust containment system. Connect the included Dust Containment Bag with the Ratchet Tie-Down Strap and place the fan near the source of the dust production. The airborne particulates are sucked into the fan’s powerful air track and trapped in the attached dust containment bag which can be conveniently emptied when desired. 24-IND Package: Part No. 913-1543 24-IND-EP (Explosion Proof) Package: Part No. 913-1544 24-HD Package: Part No. 913-1541 24-HD-EP (Explosion Proof) Package: Part No. 913-1542 Includes: Tempest Fan – 24-IND (Shown) or 24-HD Accessories – Dust Containment Bag – Ratchet Tie-Down Strap -
Tempest EBS-16 Electric-Powered Smoke Ejector
Price range: $1,588.61 through $3,576.83The Tempest EBS-16, or Box Fan, is popular for all forms of confined space ventilation. Negative Pressure Ventilation (NPV) These uniquely designed impeller “wings” deliver maximum air volume (CFM), velocity and pressure. They’re manufactured from a high strength composite which are intended to disintegrate if struck by any foreign objects. This ensures any broken blade fragments do not leave the safety of the grill and shroud. Light Weight At 47 lbs, the Tempest EBS-16 is one of the lightest weight ventilation units available. It’s reduced dimensions and frame design allow users to easily carry it to and from the work site. Single Speed AOC Motor The Tempest EBS-16 comes standard with a single speed electric AOC motor with an output of 0.3 HP. This specific motor is matched perfectly with the fan blade’s size and pitch to produce the most effective air movement possible. Formed & Welded Roll Cage Frame Not an ounce of Tempest’s well known reliability and durability that comes standard on every fan was sacrificed to achieve this unit’s small stature and light weight. The frame is made entirely of steel; all molded, formed and welded into a sturdy roll-cage design. Like every Tempest, it’s built to last on the job site. Compact Size Originally intended for confined space ventilation, the EBS-16 is small enough to hang, sit or fit in a wide array of tight spaces. Whether space is a factor for you for in storing or using ventilation, our box fan will suit you perfectly. FEATURES: The Tempest Electric-Powered Smoke Ejector – EBS-16, is popular for all forms of confined space ventilation. It’s light and small enough to ventilate tight areas but still built to Tempest’s standard of long lasting durability and reliability. Plug it in and remove the smoke/fumes/particulates out from almost any location. Type Confined Space Fan, Hazardous Locations BLADE 16″ Diameter Assembly Made Up of 6, Air Flex Fiberglass Reinforced Polyamide Blades FRAME Formed and Welded Sheet Metal Construction with Powder-Coat Finish SHROUD Integral Component of Frame BUSHING Keyed Shaft and Set or Cap Screws GRILLE Continuous Circular Wound External-Weld Steel Wire w/ 4 Tie Points for Additional Safety Steel is Zinc-Plated with a Clear Chromate Finish MOTOR/DRIVE 0.3 HP or 1.5 HP Single Speed Electric AOC Motorn Designed to run on 15 AMP Circuit Actual Draw Approx. 6.3 AMP (0.3 HP) or 14.2 (1.5 HP) EXPLOSION PROOF MOTOR OPTION Rated for Class I (Group C & D) and Class II (Group F & G) Environments Part No. Model No. Dia. HP CFM Dimensions (W” x D” x H”) Weight 913-1000 EB-16-S-0.3 16″ 0.3 3,200 18.75″ x 14.25″ x 19.50″ 47 lbs. 913-1001 EB-16-S-0.3-EP 16″ 0.3 3,200 18.75″ x 14.25″ x 19.50″ 52 lbs. 913-1010 EB-16-S-1.5 16″ 1.5 11,804 18.75″ x 14.25″ x 19.50″ 59 lbs. -
Tempest Enviroduct Flex Tube Ducting
Price range: $683.33 through $1,552.12Anti-Static, Fire Retardant "Enviroduct" Flex Tube Ducting -
Tempest Exhaust Deflector for 21″ and 24″ Blowers with Honda Engine
$53.30Exhaust Deflector for 21" and 24" Blowers with Honda Engine -
Tempest Exhaust Extension for Gasoline Driven Blowers
$556.46Exhaust Extension for Gasoline Driven Blowers, 2" Dia x 10 Feet -
Tempest Flex Tube Ducting
Price range: $421.21 through $712.12Flex Tube Ducting -
Tempest Foam Adapter for use on BB16 or MT236
$1,919.97Foam Adapter for use on BB16 or MT236 -
Tempest Front Foot Cone Assembly
$20.81Front Foot Cone Assembly -
Tempest Gas Powered Additional 10 Foot Extension
$386.20Gas Powered Additional 10 Foot Extension -
Tempest Gasoline-Powered Smoke Ejector
Price range: $2,719.51 through $3,100.91Tempest’s GBS Smoke Ejector series is a popular unit for all forms of confined space ventilation, a design that’s been used for decades. It’s light and small enough to ventilate tight areas yet still built to Tempest’s high standard of long lasting durability and reliability. The GBS’s Honda GX engines deliver massive performance out of a compact footprint. Pull the smoke/fumes/particulates out from almost any location, or turn it around and blow them out. YOUR CHOICE OF POWERFUL MOTORS Our GBS Confined Space Smoke Extractor comes standard with a gas motor with an output range of either Honda GX120 3.5HP or the Honda GX160 4.8 HP. Each motor is perfectly matched with the 16-inch fan blades and pitch to produce the most effective air movement possible. Part No. Model No. Diameter HP CFM Dimensions (W” x D” x H”) Weight 911-1024 GB-16-S-3.5 16″ 3.5 9,372 22″ x 18″ x 22″ 54 lbs. 911-1020 GB-16-S-4.8 16″ 4.8 11,172 22″ x 18″ x 22″ 78 lbs. -
Tempest Handle / Wheel Kit for 18″ and 21″
$196.23Handle / Wheel Kit for 18" and 21" -
Tempest Hanging Bracket, Set
$63.35Hanging Bracket, Set -
Tempest MILWAUKEE 6-Port Multi-Battery Charger
$448.73MILWAUKEE 6-Port Multi-Battery Charger -
Tempest MILWAUKEE M18 12 AH Battery
$618.06MILWAUKEE M18 12 AH Battery -
Tempest MILWAUKEE Single Battery Charger
$393.82MILWAUKEE Single Battery Charger -
Tempest Misting Ring Assembly
Price range: $339.69 through $533.43725-049 - Misting ring for PAL 30 725-049S - Misting Ring Assembly for 16 - 18" Blowers - Includes 14" Straps and Shut-Off Valve 725-049L - Misting Ring Assembly for 21 - 27" Blowers - Includes 24" Straps and Shut-Off Valve -
Tempest PAL-24 Electric Powered Fan
Price range: $2,828.59 through $3,831.38Tempest fans feature some of the highest CFM measurements possible in a mid-size mobile unit; the PAL-24 is no exception. Heavy Duty Roll Cage Frame The Tempest PAL-24 features the most robust, solid welded frame of any mid size mobile fan around. Industrial equipment is exposed to bumps, scrapes and slams on a regular basis, that’s why we’ve taken the time to design and manufacture the strongest frame possible. Every frame joint is welded rather than bolted for increased strength. This fan is built to take anything thrown at it from every direction. High CFM Output Due to the applications in which they are needed, Tempest fans feature some of the highest CFM (Cubic Feet Per Minute) measurements possible in a mid-size mobile unit; the PAL-24 is no exception. The blades are designed specifically for the 1 HP motor the fan uses to allow for the greatest performance possible. The enclosed shroud directs the air pattern over greater distances towards the desired location. When looking to ventilate an area in high risk environments, you can’t afford not to go with a Tempest. The Turbo 2000 Shroud The Turbo 2000 Shroud is the same shroud equipped on our line of Fire Rescue fans, which are used by firefighters around the world. The redesigned inward curve and front of the shroud increases air velocity by up to 30%. This results in faster, more aggressive ventilation in a smaller shroud profile. AirFlex Composite Impeller These uniquely designed impeller “wings” deliver maximum air volume (CFM), velocity and pressure. They’re manufactured from a high strength composite which are intended to disintegrate if struck by any foreign objects. This ensures the spinning, broken blades do not leave the safety of the grille and shroud. SINGLE SPEED OR VARIABLE SPEED MOTOR The PAL-24 comes standard with a single speed electric TEFC motor with an output of 1.0 HP or the option of being equipped with a 2.0 HP variable speed motor. This specific motors are both matched perfectly with the fan blade’s size and pitch to produce the most effective air movement possible. LARGE 10″ RUBBER WHEELS These specific wheels will never go flat and are large enough to roll over almost anything you’ll run into: Rocks, mud, pipe, glass; you name it. Where ever you need this fan, you’ll be able to get it there quickly and safely. UL & CE COMPLIANT SAFETY GRILLE Every Tempest fan grille is manufactured to meet UL & CE safety requirements. These specific standards and measurements ensure that foreign objects won’t make their way into contact with the fan’s blades. EXPLOSION PROOF MOTOR The Explosion Proof Motor option is rated to operate safely in Class I, Groups C & D and Class II, Groups F & G environments. This engine is also shown with an Explosion proof ON/OFF switch. When dealing with potentially flammable environments, EP is a must. The EP option is only available with the single speed motor configuration. FEATURES: Due to the applications in which they are needed, Tempest fans feature some of the highest CFM (Cubic Feet Per Minute) measurements possible in a mid-size mobile unit; the PAL-24 is no exception. The blades are designed specifically for the 1 HP motor the fan uses to allow for the greatest performance possible. The enclosed shroud directs the air pattern over greater distances towards the desired location. When looking to ventilate an area in high risk environments, you can’t afford not to go with a Tempest. Type Positive Pressure Ventilation Fan, Cone Air Flow (CAF) BLADE 24″ Diameter Assembly Made Up of AirFlex Fiberglass Reinforced Polyamide Blades FRAME Rugged, Lightweight, Square-Steel Tubing with Powder-Coat Finish SHROUD Turbo 2000 Tapered Aluminum w/ Durable Powder-Coat Finish WHEELS 8” Non-Pneumatic w/ Steel Hubs GRILLE Continuous Circular-Wound, External-Weld Steel Wire with 8 Tie Points for Additional Safety Meets UL & European CE Safety Standards MOTOR/DRIVE Single Speed Models: Direct-Drive Single Speed 110-120V, 60Hz or 220-230V, 50Hz Electric Motor, GFCI Compatible Variable Speed Models: Direct-Drive Variable Speed 110-120V, 60Hz or 220-230V, 50Hz Electric Motor, GFCI Compatible, NEMA-4 Rated Drive EXPLOSION PROOF OPTION (SINGLE SPEED MOTOR ONLY) EXPLOSION PROOF OPTION (SINGLE SPEED MOTOR ONLY) MAXIMUM CORD STRENGTH (SINGLE-SPEED MOTOR) 14 GA. – 60′ 12 GA. – 95′ 10 GA. – 150′ 8 GA. – 240′ 6 GA. – 380′ Part No. Model No. Dia. HP CFM Dimensions (W” x D” x H”) Weight Options 913-1065 PAL-24 24″ 1.0 12,867 31.00″ x 23.00″ x 40.75″ 133 lbs. Single Speed 913-1070 PAL-24-EP 24" 138 lbs. Explosion Proof 913-1075 PAL-24-EP-H 24" 138 lbs. 913-1060 PAL-24-VSR 24" 2.0 15663 158 lbs. Variable Speed 913-1066 PAL-24 NO GUARDS 24" 133 lbs. 913-1080 PAL-30 30" 1.5 13000 33" x 22" x 35.50" 133 lbs. 913-1085 PAL-30-VSR 30" 2.0 15072 158 lbs. -
Tempest PAL-30 Electric Powered Fan
Price range: $2,702.89 through $3,169.68Tempest fans feature some of highest CFM measurements possible in a mid-size mobile unit; the PAL-30 is no exception. Heavy Duty Roll Cage Frame The Tempest PAL-30 features the most robust, solid welded frame of any mid size mobile fan around. Industrial equipment is exposed to bumps, scrapes and slams on a regular basis, that’s why we’ve taken the time to design and manufacture the strongest frame possible. Every frame joint is welded rather than bolted for increased strength. This fan is built to take anything thrown at it from every direction. High CFM Output Due to the applications in which they are needed, Tempest fans feature some of highest CFM (Cubic Feet Per Minute) measurements possible in a mid-size mobile unit; the PAL-30 is no exception. The blades are designed specifically for the 1 HP motor the fan uses to allow for the greatest performance possible. Three (3) Blade 30″ Propeller The PAL-30 is one of the few Tempest fans to feature a propeller blade design as opposed to the more common impeller. This three blade propeller, paired with the open zinc-plated clear chromate finish grille guard delivers high CFM in a broad air pattern. This defining characteristic makes it perfect for general warehouse/industrial cooling and ventilation. Open Grille Guard The PAL-30’s propeller blades require an open grille to operate as designed. This durable zinc-plated wire guard with numerous welded tie points for increased strength offers the very best in protection for both the user and the fan. Small enough to keep foreign objects out of the direct path of the blades, yet large enough to provide maximum air movement, our open grille guard is exactly what’s needed for industry leading safety and performance in the same package. SINGLE SPEED OR VARIABLE SPEED MOTOR The PAL-30 comes standard with a single speed electric TEFC motor with an output of 1.5 HP or the option of being equipped with a 2.0 HP variable speed motor. This specific motors are both matched perfectly with the fan blade’s size and pitch to produce the most effective air movement possible. LARGE 10″ RUBBER WHEELS These specific wheels will never go flat and are large enough to roll over almost anything you’ll run into: Rocks, mud, pipe, glass; you name it. Where ever you need this fan, you’ll be able to get it there quickly and safely. UL & CE COMPLIANT SAFETY GRILLE Every Tempest fan grille is manufactured to meet UL & CE safety requirements. These specific standards and measurements ensure that foreign objects won’t make their way into contact with the fan’s blades. FEATURES: Due to the applications in which they are needed, Tempest fans feature some of highest CFM (Cubic Feet Per Minute) measurements possible in a mid-size mobile unit; the PAL-30 is no exception. The blades are designed specifically for the 1 HP motor the fan uses to allow for the greatest performance possible. Type General Ventilation Fan BLADE 30″ Diameter Assembly Made Up of Composite Blades, Bolted to a Center Hub FRAME Welded 1.5″ Tubular Steel with Powder-Coat Finish WHEELS 10″ Solid Rubber with High Strength Polymer Hub GRILLE Continuous Circular-Wound, External-Weld Steel Wire with 8 Tie Points for Additional Safety Meets UL & European CE Safety Standards MOTOR/DRIVE Single Speed Models: Direct-Drive Single Speed 110-120V, 60Hz or 220-230V, 50Hz Electric Motor, GFCI Compatible Variable Speed Models: Direct-Drive Variable Speed 110-120V, 60Hz or 220-230V, 50Hz Electric Motor, GFCI Compatible, NEMA-4 Rated Drive Part No. Model No. Dia. HP CFM Dimensions (W” x D” x H”) Weight Options 913-1080 PAL-30 30″ 1.5 13,000 33.00″ x 22.00″ x 35.50″ 133 lbs. Single Speed 913-1085 PAL-30-VSR 30″ 2.0 15,072 33.00″ x 22.00″ x 35.50″ 158 lbs. Variable Speed -
Tempest Quick Release Hold Downs, Special for 16″ Fans (Pair)
$180.40Quick Release Hold Downs, Special for 16" Fans (Pair) -
Tempest Quick Release Hold Downs, Standard for 18″ and 21″ Fans (Pair)
$135.42Quick Release Hold Downs, Standard for 18" and 21" Fans (Pair) -
Tempest Ratchet Tie-Down – Pair
$57.55Don’t forget a pair of Ratchet Tie-Downs for your Tempest fan. Tie-Downs are used in attaching Smooth Bore Ducting and the Dust Collector in addition to aid in securing your Tempest during transportation. It’s a simple addition with a number a uses. Simple Design for Easy Operation Allows Attachment of Ducting and Dust Collector Secures Fan During Transport 1″ x 12′ Each -
Tempest Rear Spring Foot Assembly
$23.81Rear Spring Foot Assembly -
Tempest Rehab Misting Collar with 3/4″ NH Coupling
$704.55Rehab Misting Collar with 3/4" NH Coupling -
Tempest Rehab Misting System
$989.42Rehab Misting System -
Tempest Single – Speed Electric Power Blower
Price range: $2,433.04 through $3,163.09Tempest Single-Speed PPV fans are perfect for departments looking to go electric on a limited budget. AIRFLEX COMPOSITION IMPELLER Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. WELDED STEEL ROLL CAGE FRAME Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. ERGONOMIC DESIGN Exclusive frame design makes it convenient to lift, carry and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research and experience to create the most ergonomic platform possible. FOOT OPERATED TILT ADJUSTMENT No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°. GFCI COMPATIBLE SINGLE SPEED ELECTRIC The Single Speed’s 1.5 and 1.0 HP motors are extremely simple to operate with only a single switch used to turn the unit ON or OFF. All models are GFCI compatible and will run on any 15 amp circuit without tripping the breaker. Every Single Speed positive pressure ventilation fan provides impressive CFM capable of creating positive pressure ventilation. EXPLOSION PROOF OPTION One of the benefits of a single speed electric motor is its ability to be readily built into an explosion proof housing. The Single Speed EP motor option is rated to operate safely in Class I, Groups C & D and Class II, Groups F & G environments. When dealing with potentially flammable environment, EP is a must. Optional explosion proof ON/OFF switch also available. 16″ Single Speed Explosion Proof Part No. 910-1201 18″ Single Speed Explosion Proof Part No. 910-1221 21″ Single Speed Explosion Proof Part No. 910-1241 24″ Single Speed Explosion Proof Part No. 910-1261 NOTE: Explosion Proof options do not affect Power Blower size or performance. 8″ NON-PNEUMATIC WHEELS Extra wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The PPV fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of the fan while in operation is eliminated. Risk of getting clothing in the positive pressure fan’s blades while kneeling to set brake levers is eliminated. 16″ models are only available with 6″ non-pneumatic tires. TURBO 2000 SHROUD By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind. FLIP-UP/FOLD-DOWN HANDLE The exclusive full width handle design makes pushing or pulling the positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. DUAL “WINNING STEP” No levers to set or knobs to tighten when setting the angle for PPV. Foot operated adjustment is quick, easy and secure. Dual step allows for adjustment with either foot. Four back and one forward tilt position. SAFETY GRILLE Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards. INFORMATION / SAFETY BAR Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use. CHARACTERISTICS THIS WILL BE ALL CHANGED Tempest® Tech Series is an innovative line of positive pressure blowers featuring ergonomic design features and leading-edge motor technology and performance. Tech Series blowers are engineered for performance, durability, versatility, and ease of use. The VS-1.2 battery-driven blower features a taller fold-down handle to make deployment and storage easier. It delivers a level of utility and performance found with no other battery-driven blower. TYPE Positive Pressure Ventilation Fan, Cone Air Flow (CAF) BLADE 16″, 18″, 21″, or 24″ Diameter Assembly, AirFlex Fiberglass Reinforced Polyamide Blades FRAME Rugged, Lightweight, Square-Steel Tubing with Powder-Coat Finish SHROUD Turbo 2000 Design, Tapered Aluminum w/ Durable Powder-Coat Finish WHEELS 16″ Models: 6″ Non-Pneumatic w/ Steel Hubs 18″, 21″ and 24″ Models: 8″ Non-Pneumatic w/ Steel Hubs GRILLE Continuous Circular-Wound, External-Weld Steel Wire with 8 Tie Points for Additional Safety Meets UL & European CE Safety Standards MOTOR/DRIVE Single Speed Electric 16″ Models: 1.5 HP TEFC Motor 18″, 21″ and 24″ Models: 1.0 HP TEFC Motor GFCI Compatible: Designed to Run on 15 AMP Circuit – Actual Draw Approx. 14 AMP 110V / 60Hz Standard (Other Options may be Available) EXPLOSION PROOF MOTOR OPTION Rated for Class I (Groups C & D) and Class II (Groups F & G) Environments MAXIMUM CORD LENGTH 14 GA. – 60′ 12 GA. – 95′ 10 GA. – 150′ 8 GA. – 240′ 6 GA. – 380′ TILT Foot-Operated Tilt Mechanism 16” Models: Four Position Tilt, +10°, +5°, 0°, -5° 18”, 21”, 24” Models: Five Position Tilt, +15°, +10°, +5°, 0°, -5° Part No. Model No. Diameter Option Power CFM Dimensions (inches) Weight (lbs) 910-1200 SS-16-S-1.5 16" Single Speed 1.5 11,804 20.5" x 19.75" x 21.75" 74 Lbs. 910-1220 SS-18-S-1.0 18" Single Speed 1.0 8,748 22" x 21" x 24.25" 76 Lbs. 910-1240 SS-21-S-1.0 21" Single Speed 1.0 11,698 24.75" x 21" x 26.25" 81 Lbs. 910-1260 SS-24-S-1.0 24" Single Speed 1.0 12,867 28" x 21" x 30" 90 Lbs. 910-1201 SS-16-S-1.0-EP 16" Explosion Proof 1.0 7,502 20.5" x 19.75" x 21.75" 79 Lbs. 910-1221 SS-18-S-1.0-EP 18" Explosion Proof 1.0 8,748 22" x 21" x 24.25" 81 Lbs. 910-1241 SS-21-S-1.0-EP 21" Explosion Proof 1.0 116,98 24.75" x 21" x 26.25" 86 Lbs. 910-1261 SS-24-S-1.0-EP 24" Explosion Proof 1.0 12,867 28" x 21" x 30" 95 Lbs -
Tempest Single-Speed Electric Smoke Ejector
Price range: $1,291.56 through $2,803.04While they’re not as effective as positive pressure ventilators, Smoke Ejectors are still the go to for many departments around the world for their compact size/weight, simplicity and affordability. Perfect for ventilating in confined spaces. Extremely light weight and compact for convenient lifting/carrying and storage/transport. Negative Pressure Ventilation Tis Smoke Ejector is designed to perform effective and efficient negative pressure ventilation, or NPV. While positive pressure ventilation (PPV) blows air into a structure, negative pressure sucks air out. Tis can be useful in confined space situations and/or when ventilated air must be controlled to a greater extent. AirFlex Composition Impeller Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. 0.3 HP or 1.5 HP Electric Motor Ventilator is available in a number of configurations including a light weight 0.3 HP or high performance 1.5 HP single speed electric motor. Available with hazardous location (Explosion Proof, EP) motors which are intended for Class 1, Group C&D and Class 2 Group F&G environments. Motors can be ordered in 110-120V/60Hz or 220-230V/50Hz. Gasoline engine driven models are also available. Compact Size and Weight Lightest weight and most compact ventilator available for extremely convenient use and transport. Its reduced dimensions make it perfect for compartments with limited space and confined space ventilation. At under 50 lbs., lifting and carrying this unit is a breeze and ideal for departments which often carry their ventilator over long distances or up and down stairwells. Welded Steel Roll Cage Frame Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. Part No. Model No. Size HP CFM Dimensions (W” x D” x H”) Weight 911-1000 EB-16-S-0.3 16” 0.3 3,200 18.75” x 14.25” x 19.50” 47 lbs. 911-1500 EB-16-S-0.3 KIT* 16″ 0.3 3,200 18.75” x 14.25” x 19.50” 47 lbs. 911-1001 EB-16-S-0.3-EP 16″ 0.3 3,200 18.75” x 14.25” x 19.50” 52 lbs. 911-1501 EB-16-S-0.3-EP KIT* 16″ 0.3 3,200 18.75” x 14.25” x 19.50” 52 lbs. 911-1010 EB-16-S-1.5** 16″ 1.5 11,804 18.75” x 14.75” x 19.50” 59 lbs. * Kit includes Smoke Ejector, Door Bar Holder, Hanging Bracket Set and Clip-On Duct Hose Adapter ** Kit not intended for use with model EBS-16-S-1.5 (part no. 911-1010) -
Tempest Smooth Bore Ducting
Price range: $1.81 through $1,092.21Smooth Bore Ducting -
Tempest Smooth Bore Stabilizer
Price range: $497.97 through $652.69Smooth Bore Stabilizer -
Tempest Special Operations Gas Power Blower
$3,397.78Special Operations Power Blowers: the perfect choice to ventilate large, complex and/or multi-story structures and stairwells. LAMINAR AIR FLOW The Special Operations (SP) Power Blower™ uses a uniquely designed grill and shroud to produce a narrow, high pressure air pattern called Laminar Air Flow. Fires in large, complex structures as well as multi-level structures build high back pressures inside the building. This high pressure air pattern is capable of overcoming these back pressures resulting in uninhibited ventilation. This allows for a distanced set-back reducing fan noise heard inside the structure. AIRFLEX COMPOSITION IMPELLER Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. WELDED STEEL ROLL CAGE FRAME Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. FOOT OPERATED TILT ADJUSTMENT No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°. HONDA® GX200 AND GX270 ENGINES The SP positive pressure ventilation fans are powered by the tried and true Honda® name. Using two of their most reliable small engines, the GX200 and GX270, paired with Tempest’s signature quality fan designs, these units are built to last. At 5.5 and 8.5 HP, the GX series motors are also equipped to deliver the performance and CFM you’d expect from the Tempest name. EXTENDED SET BACK Cone Air Flow fan placement has always been 1.2 to 1.8 m from the doorway. The SP fan is most effective at a set-back of 8.86 to 10.8 m using Laminar Air Flow, allowing improved personnel access. The new shroud and grille design makes high performance at this distance possible. SP units require at least a 6.9 m set back to achieve effective positive pressure ventilation. FLIP-UP/FOLD-DOWN HANDLE The exclusive full width handle design makes pushing or pulling a positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. SIX POSITION DUAL “WINNING STEP” No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°. REAR WHEEL DESIGN The rear wheel design improves the PPV fan balance while it is rolling, keeping the shroud from touching the ground and making deployment easy across snow, heavy mud or rough, uneven terrain. This design also allows for rapid blower direction adjustment saving time and improving safety. Tempest blowers have no need for wheel brakes. This in turn removes the chance for forgetting to set/release the brakes. INFORMATION/SAFETY BAR Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use. PRODUCT CHARACTERISTICS Special Operations Power BlowersTM are the perfect choice for departments who often ventilate large, complex and/or multi-story structures (>5005.21 sq.ft.) and stairwells. Allows for distanced set-back over 9.84 ft. but requires at least 6.88 ft. to achieve positive pressure ventilation. Available in gas (Honda® GX engine) or electric (GFCI compatible, variable speed) driven models. TYPE Positive Pressure Ventilation Fan, Laminar Air Flow (LAF) DRIVE/MOTOR 18″ Model: Direct Drive Gasoline – 5.5 HP Honda® GX200 21″ Model: Direct Drive Gasoline – 8.5 HP Honda® GX270 BLADE 18″ or 21″ Diameter Assembly Made Up of AirFlex Fiberglass Reinforced Polyamide Blades SHROUD “SP” Design, Tapered Aluminum w/ Durable Powder-Coat Finish WHEELS 8″ Non-Pneumatic w/ Steel Hubs GRILLE Powder Coated, Continuous Circular-Wound, Flat Spiral with 6 Tie Points for Additional Safety. Meets UL & European CE Safety Standards FRAME Rugged, Lightweight, Square-Steel Tubing with Powder-Coat Finish TILT Foot-Operated Tilt Mechanism Six Position Tilt, +15°, +10°, +5°, 0°, -5°, -10° Part No. Model No. Diameter HP CFM Dimensions (W” x D” x H”) Weight 910-1620 SP-18-H-5.5 18″ 5.5 15,792 20.50″ x 21.50″ x 22.50″ 88lbs. -
Tempest Variable-Speed Electric Power Blower
Price range: $2,878.28 through $3,852.79The VSR is the latest innovation in our variable speed electric delivers unmatched performance. AIRFLEX COMPOSITION IMPELLER Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. WELDED STEEL ROLL CAGE FRAME Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. ERGONOMIC DESIGN Exclusive frame design makes it convenient to lift, carry and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research and experience to create the most ergonomic platform possible. FOOT OPERATED TILT ADJUSTMENT No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°. GFCI/NEMA 4 VARIABLE SPEED DRIVE The VSR positive pressure ventilation fan bears our latest variable speed drive. This GFCI compatible, NEMA 4 rated control box is durable, reliable and easy to operate. The 0 – 100 Rheostat knob and On/Off toggle are all it takes to operate the unit quickly and effectively. PERFORMANCE 2.0 HP MOTOR You don’t always have to sacrifice performance for the convenience of an electric powered positive pressure ventilation fan. Our latest Power BlowerTM, the VSR, is closing the CFM gap between gas and electric. Equipped with a massive 2.0 HP motor, paired with our signature blade and shroud design, the VSR delivers the absolute best in GFCI compatible performance. If you’re looking to go electric but don’t want to sacrifice airflow, the VSR PPV fan is the answer. 8″ NON-PNEUMATIC WHEELS Extra wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The PPV fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of the fan while in operation is eliminated. Risk of getting clothing in the positive pressure fan’s blades while kneeling to set brake levers is eliminated. 16″ models are only available with 6″ non-pneumatic tires. TURBO 2000 SHROUD By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind. FLIP-UP/FOLD-DOWN HANDLE The exclusive full width handle design makes pushing or pulling the positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. DUAL “WINNING STEP” No levers to set or knobs to tighten when setting the angle for PPV. Foot operated adjustment is quick, easy and secure. Dual step allows for adjustment with either foot. Four back and one forward tilt position. SAFETY GRILLE Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards. INFORMATION/SAFETY BAR Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use. PRODUCT CHARACTERISTICS The VSR is the latest innovation in our variable speed electric offering and delivers unmatched performance, bridging the gap between gas and electric airflow. All models feature a class leading 2.0 HP motor and simple to operate 0 to 100 variable speed control. NEMA-4 rated drive provides extra protection in wet environments. This fan will operate on GFCI protected circuits. Motors can be ordered in 110-120V/60Hz or 220-230V/50Hz. (110-120V part numbers shown; call for 220-230V part numbers). TYPE Variable-Speed Positive Pressure Ventilator BLADE 16 to 24” Diameter Assembly Made Up of 8 Air Flex Fiberglass Reinforced Polyamide Blades FRAME Welded Square Steel Tubing with Powder-Coat Finish SHROUD Turbo 2000 Tapered Aluminum BUSHING Keyed Shaft and Set or Cap Screws WHEELS 8” Non-Pneumatic with High Strength Steel Hubs GRILLE Continuous Circular Wound External-Weld Steel Wire with 8 Tie Points for additional safety - Steel is Zinc-Plated with a Clear Chromate Finish MOTOR/DRIVE 0.5 HP Variable Speed OR 0.8 HP Variable Speed OR 1.5 HP Variable Speed OR 2.0HP Variable Speed EXPLOSION PROOF 120V / 60Hz Standard (Other Options may be Available) Approx. Amp Draw -14 AMP Rated for Class I (Group C & D) and Class II (Group F & G) Environments MAXIMUM CORD LENGTH 14 GA. - 60’ 12 GA. - 95’ 10 GA. - 150’ 8 GA. - 240’ 6 GA. - 380’ Part No. Model No. Dia. Option Power CFM Dimensions (inches) Weight 910-1400 VS-16-R-2.0 16" Variable Speed 2.0 11,551 21" x 19.75" x 23" 98 Lbs. 910-1420 VS-18-R-2.0 18" Variable Speed 2.0 12,839 23" x 21" x 24.25" 104 Lbs. 910-1440 VS-21-R-2.0 21" Variable Speed 2.0 14,836 26" x 21" x 26.25" 108 Lbs. 910-1460 VS-24-R-2.0 24" Variable Speed 2.0 15663 29.5" x 21" x 30" 119 Lbs. 910-1300 VS-16-G-1.5 16" Variable Speed 1.5 11,125 21" x 19.75" x 21.75" 89 Lbs. 910-1320 VS-18-G-1.5 18" Variable Speed 1.5 11,861 23" x 21" x 24.25" 95 Lbs. 910-1340 VS-21-G-1.5 21" Variable Speed 1.5 13,414 26" x 21" x 26.25" 99 Lbs. 910-1360 VS-24-G-1.5 24" Variable Speed 1.5 12,901 29.5" x 21" x 30" 109 Lbs. 910-1500 VS-16-M-0.5 16" Variable Speed 0.5 10,650 21" x 19.75" x 21.75" 68 Lbs. 910-1520 VS-18-M-0.5 18" Variable Speed 0.5 8,465 23" x 21" x 24.25" 82 Lbs. 910-1540 VS-21-M-0.5 21" Variable Speed 0.8 11,475 26" x 21" x 26.5" 86 Lbs. -
Tempest Variable-Speed Special Operations Electric Power Blower
$4,223.79Special Operations Power Blowers: the perfect choice to ventilate large, complex, and/or multi-story structures and stairwells. LAMINAR AIRFLOW The Special Operations (SP) Power Blower™ uses a uniquely designed grill and shroud to produce a narrow, high-pressure air pattern called Laminar Air Flow. Fires in large, complex structures as well as multi-level structures build high back pressures inside the building. This high-pressure air pattern is capable of overcoming these back pressures resulting in uninhibited ventilation. This allows for a distanced set-back reducing fan noise heard inside the structure. AIRFLEX COMPOSITION IMPELLER Uniquely designed impellers deliver maximum air volume (CFM), velocity, and pressure from each Tempest Power Blower™ . Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon the impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. WELDED STEEL ROLL CAGE FRAME Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. FOOT OPERATED TILT ADJUSTMENT No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°. GFCI COMPATIBLE VARIABLE-SPEED ELECTRIC The SPVS bears our latest variable speed drive. This GFCI compatible, NEMA 4 rated control box is durable, reliable, and easy to operate. The 0 – 100 rheostat knob and On/Off toggle is all it takes to operate the unit quickly and effectively. PERFORMANCE 2.0 HP MOTOR Equipped with a massive 2.0 HP motor and paired with its signature blade and shroud design, the SPVS positive pressure ventilation fan delivers the absolute best in GFCI compatible performance. EXTENDED SET BACK Cone Air Flow fan placement has always been 1.2 to 1.8 m from the doorway. The SP fan is most effective at a setback of 2.7 to 3.3 m using Laminar Air Flow, allowing improved personnel access. The new shroud and grille design allow high performance at this distance possible. SP units require at least a 7-foot set back to achieve effective positive pressure ventilation. FLIP-UP/FOLD-DOWN HANDLE The exclusive full-width handle design makes pushing or pulling the positive pressure ventilation fan too and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. SIX POSITION DUAL “WINNING STEP” No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°. REAR WHEEL DESIGN The rear wheel design improves the positive pressure ventilation fan balance while it is rolling, keeping the shroud from touching the ground and making deployment easy across the snow, heavy mud, or rough, uneven terrain. This design also allows for rapid blower direction adjustment saving time and improving safety. Tempest blowers have no need for wheel brakes. This in turn removes the chance for forgetting to set/release the brakes. INFORMATION/SAFETY BAR The Information/Safety Bar added to the folding handle features a large section of durable, reflective material to dramatically increase the visibility of the PPV fan from the front view and a full list of instructions to allow for safe and effective use. PRODUCT CHARACTERISTICS Special Operations Power BlowersTM are the perfect choice for departments who often ventilate large, complex and/or multi-story structures (>464 sq. m.) and stairwells. Allows for distanced set-back over 3 m. but requires at least 2.1 m to achieve positive pressure ventilation. Available in gas (Honda® GX engine) or electric (GFCI compatible, variable speed) driven models. TYPE Positive Pressure Ventilation Fan, Laminar Air Flow (LAF) BLADE 18″ Diameter Assembly Made Up of AirFlex Fiberglass Reinforced Polyamide Blades FRAME Rugged, Lightweight, Square-Steel Tubing with Powder-Coat Finish SHROUD “SP” Design, Tapered Aluminum w/ Durable Powder-Coat Finish WHEELS 8″ Non-Pneumatic w/ Steel Hubs GRILLE Powder Coated, Continuous Circular-Wound, Flat Spiral with 6 Tie Points for Additional Safety. Meets UL & European CE Safety Standards MOTOR/DRIVE Direct-Drive Variable Speed 110-120V, 60Hz (220-230V, 50Hz Available) Electric Motor GFCI Compatible NEMA-4 Rated Drive TILT Foot-Operated Tilt Mechanism Six Position Tilt, +15°, +10°, +5°, 0°, -5°, -10° Part No. Model No. Dia. HP CFM Dimensions (W” x D” x H”) Weight 910-1720 SP-18-V-2.0 18″ 2.0 13,338 21.75″ x 21.50″ x 25.75″ 105 lbs. -
Tempest Ventilation Kit
Price range: $3,666.19 through $4,190.79A simple and effective way to remove fumes, dust or odors from a job site. Place the fan near the source of the contaminants, connect the Smooth Bore Ducting, and run the ducting to an outside area up to 150′ away or more. Made in the USA. A simple and effective way to remove fumes, dust or odors from a job site. Place the fan near the source of the contaminants, connect the Smooth Bore Ducting, and run the ducting to an outside area up to 150′ away or more. 24-IND Package: Part No. 913-1523 24-IND-EP (Explosion Proof) Package: Part No. 913-1524 24-HD Package: Part No. 913-1521 24-HD-EP (Explosion Proof) Package: Part No. 913-1522 Includes: Tempest Fan – 24-IND (Shown) or 24-HD Accessories – 500 ft. roll of 6 mil. Smooth Bore Ducting (Not Shown) – Smooth Bore Stabilizer – Pair of Ratchet Tie-Down Straps -
Tempest VS-1.2 Tech Series Battery Power Blower w/ Folding Handle
$6,561.26The VS-1.2 battery-driven blower delivers a level of utility and performance found with no other battery-driven blower. 70-Minute Run-Time Even at full speed, the Tempest VS-1.2 provides an industry-leading 70 minute run time with fold-down handle 10,887 CFM AMCA Certified Air Flow A taped lightweight steel shroud and uniquely designed composite impeller delivers maximum air volume (CFM), velocity and pressure from the VS-1.2 Removable Battery Dependability is a must so we designed the best Lithium-Ion battery for the VS-1 blower. The battery is IP 65 rated, can be recharged in about 4 hours, and run on a complete charge for 70 minutes at full speed. AVAILABLE SHORE POWER Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible Only 52 lbs. with Battery The welded tubular aluminum frame design makes it easy to roll or lift. US Patent #.: US 11,333,291 B2 Other Features: - Variable Speed motor rated at IP65 - Thin-Vane air straightener grill and composite impeller - LED flow-path lighting positioned low for visibility below the smoke - Tapered lightweight steel shroud maximizes airflow performance - Ergonomic patent-pending frame design with transverse wheels - Small Footprint 22.88″W x 24.4″H x 11″D (Half the size of a gas blower) - Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics. CHARACTERISTICS: The Tempest® Tech Series is an innovative line of positive pressure blowers featuring ergonomic design features and leading edge motor technology and performance. Tech Series blowers are engineered for performance, durability, versatility, and ease of use. The VS-1.2 battery-driven blower features a taller fold down handle to make deployment and storage easier. It delivers a level of utility and performance found with no other battery-driven blower. Type Battery Powered Positive Pressure Power Blower IMPELLER 18″ Diameter Composite impeller FRAME Rugged, Lightweight, Welded Tubular aluminum. US Patent #.: US 11,333,291 B2 SHROUD Tapered light weight steel shroud maximizes airflow performance WHEELS 3.9″ High Impact Rubber GRILL Thin-Vane air straightener grill. MOTOR/DRIVE Variable Speed motor rated at IP65 BATTERY Removable lithium-ion w/Dynamic Battery Management System TILT -12° to +25° Part No. Model No. Dia. CFM Dimensions (W” x D” x H”) Weight 910-1825 VS1-18-0.9 FOLDING HANDLE w/Battery & Charger 18″ 10,887 22.88″ x 11″ x 24.4″ 53 lbs. -
Tempest VS-1.2 Tech Series Deluxe Battery Charger, Plug In, 110/220 VAC to 48 VDC
$224.12VS-1.2 Tech Series Deluxe Battery Charger, Plug In, 110/220 VAC to 48 VDC -
Tempest VS-1.2 Tech Series Deluxe Battery Power Blower w/ Folding Handle
$7,556.47The VS-1.2 battery-driven blower delivers a level of utility and performance found with no other battery-driven blower. 70-Minute Run-Time Even at full speed, the Tempest VS-1.2 provides an industry-leading 70 minute run time with fold-down handle 10,887 CFM AMCA Certified Air Flow A taped lightweight steel shroud and uniquely designed composite impeller delivers maximum air volume (CFM), velocity and pressure from the VS-1.2 Removable Battery Dependability is a must so we designed the best Lithium-Ion battery for the VS-1 blower. The battery is IP 65 rated, can be recharged in about 4 hours, and run on a complete charge for 70 minutes at full speed. AVAILABLE SHORE POWER Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible Only 54 lbs. with Battery The welded tubular aluminum frame design makes it easy to roll or lift. US Patent #.: US 11,333,291 B2 Other Features: - Variable Speed motor rated at IP65 - Thin-Vane air straightener grill and composite impeller - LED flow-path lighting positioned low for visibility below the smoke - Tapered lightweight steel shroud maximizes airflow performance - Ergonomic patent-pending frame design with transverse wheels - Small Footprint 22.88″W x 24.4″H x 11″D (Half the size of a gas blower) - Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics. CHARACTERISTICS: The Tempest® Tech Series is an innovative line of positive pressure blowers featuring ergonomic design features and leading edge motor technology and performance. Tech Series blowers are engineered for performance, durability, versatility, and ease of use. The VS-1.2 battery-driven blower features a taller fold down handle to make deployment and storage easier. It delivers a level of utility and performance found with no other battery-driven blower. Type Battery Powered Positive Pressure Power Blower IMPELLER 18″ Diameter Composite impeller FRAME Rugged, Lightweight, Welded Tubular aluminum. US Patent #.: US 11,333,291 B2 SHROUD Tapered light weight steel shroud maximizes airflow performance WHEELS 3.9″ High Impact Rubber GRILL Thin-Vane air straightener grill. MOTOR/DRIVE Variable Speed motor rated at IP65 BATTERY Removable lithium-ion w/Dynamic Battery Management System TILT -12° to +25° Part No. Model No. Dia. HP CFM Dimensions Weight 910-1827 VS-1.2 DELUXE - 2 Batteries/1 Charger 18″ 0.9 10,887 23.75" x 15.25" x 25" 54 lbs. -
Tempest VS-1.2 Tech Series Deluxe Battery Tray Locking Strap
$34.96VS-1.2 Tech Series Deluxe Battery Tray Locking Strap -
Tempest VS-1.2 Tech Series Deluxe Replacement Battery VS1, VS1.2, 48 VDC, 17.5 AH
$1,110.61VS-1.2 Tech Series Deluxe Replacement Battery VS1, VS1.2, 48 VDC, 17.5 AH -
Tempest VS-1.2D Tech Series DEWALT Battery Power Blower w/ folding handle
Price range: $6,499.71 through $9,916.20The VS-1.2D DEWALT battery-driven blower delivers a level of utility and performance found with no other battery-driven blower with the convenience of DEWALT FLEXVOLT 60V batteries. 70-Minute Run-Time Even at full speed, the Tempest VS-1.2 provides an industry-leading 70 minute run time with fold-down handle 10,887 CFM AMCA Certified Air Flow A taped lightweight steel shroud and uniquely designed composite impeller delivers maximum air volume (CFM), velocity and pressure from the VS-1.2 Removable Battery Dependability is a must so we designed the best Lithium-Ion battery for the VS-1 blower. The battery is IP 65 rated, can be recharged in about 4 hours, and run on a complete charge for 70 minutes at full speed. AVAILABLE SHORE POWER Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible Only 52 lbs. with Battery The welded tubular aluminum frame design makes it easy to roll or lift. US Patent #.: US 11,333,291 B2 Other Features: - Variable Speed motor rated at IP65 - Thin-Vane air straightener grill and composite impeller - LED flow-path lighting positioned low for visibility below the smoke - Tapered lightweight steel shroud maximizes airflow performance - Ergonomic patent-pending frame design with transverse wheels - Small Footprint 22.88″W x 24.4″H x 11″D (Half the size of a gas blower) - Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics. CHARACTERISTICS: The Tempest® Tech Series is an innovative line of positive pressure blowers featuring ergonomic design features and leading edge motor technology and performance. Tech Series blowers are engineered for performance, durability, versatility, and ease of use. The VS-1.2 battery-driven blower features a taller fold down handle to make deployment and storage easier. It delivers a level of utility and performance found with no other battery-driven blower. Type DEWALT FLEXVOLT Battery Powered Positive Pressure Power Blower IMPELLER 18″ Diameter Composite impeller FRAME Rugged, Lightweight, Welded Tubular aluminum. US Patent #.: US 11,333,291 B2 SHROUD Tapered light weight steel shroud maximizes airflow performance WHEELS 3.9″ High Impact Rubber GRILL Thin-Vane air straightener grill MOTOR/DRIVE Variable Speed motor rated at IP65 BATTERY With all 3 DEWALT 60V 12AH Batteries, blower will run for an average of 40 minutes or you can run off of just 1 or 2 batteries w/Dynamic Battery Management System TILT -12° to +25° Part No. Model No. Dia. CFM Dimensions (W” x D” x H”) Weight 910-1860 VS1.2 DEWALT Basic – No Battery/No Charger 18″ 9,614 22.88”L x 24.4”H x 12.25”D 51 lbs. 910-1860A Kit includes - 3 x 12Ah DEWALT Batteries & 1 Single-Bay Charger 910-1860B Kit includes - 3 x 12Ah DEWALT Batteries & 4-Bay Charger