Sullair Compressor Oil
Sullair compressor oil and lubricants including Sullube and AWD fluids. Genuine Sullair compressor fluids for optimal performance and extended equipment life.
Showing all 7 results
-

Sullair 02250181-422 Sullube Compressor Fluid – 5 Liter Jug
$235.43⚠ WARNING — H361 Reproductive Toxicity Cat 2 · California Proposition 65 disclosure applies · Download SDS (PDF) before handling · full safety + regulatory details below Safety, hazard, regulatory & reseller information (click to expand / collapse) Hazard identification (mirrored from manufacturer SDS) Signal word: WARNINGGHS classification: Reproductive Toxicity, Category 2 (per OSHA Hazard Communication Standard, 29 CFR 1910.1200; driven by alkylated diphenylamine CAS 68411-46-1 at 3–7% concentration)Hazard statement: H361 — Suspected of damaging fertility or the unborn child Precautionary statements (full GHS label) P201 — Obtain special instructions before use. P202 — Do not handle until all safety precautions have been read and understood. P280 — Wear protective gloves, protective clothing, eye protection and face protection. P308 + P313 — IF exposed or concerned: Get medical advice / attention. P405 — Store locked up. P501 — Dispose of contents / container to an approved waste disposal plant. Channel of trade Industrial / occupational use only — sold to trained personnel for use in compliance with 29 CFR 1910.1200. Not intended for consumer sale. Occupational exposures are addressed under the federal HazCom standard (27 CCR §25606) rather than the Proposition 65 consumer warning regime. Waste handling responsibility Used compressor lubricant may be regulated as hazardous waste depending on contamination, mixture, and jurisdiction. Purchaser is responsible for waste characterization and disposal per the Resource Conservation and Recovery Act (40 CFR Part 262) and any applicable state and local regulations. Do not pour to drains, soil, or surface water. Safety Data Sheet & reseller posture The controlling Safety Data Sheet is the unmodified manufacturer PDF: Download Sullube SDS (Dow v14.0, 2025-07-25, PDF). The SDS is also delivered with order confirmation per OSHA 29 CFR 1910.1200(g)(7). PE Energy Industrial Supply is a distributor of this product and relies on the manufacturer’s hazard determination per 29 CFR 1910.1200(d)(4). Manufacturer: The Dow Chemical Company; product brand owner: Hitachi Global Air Power US, LLC (sold as “Sullube” through Sullair). For 24-hour chemical emergency: CHEMTREC +1-800-424-9300. California Proposition 65 notice This product is sold for industrial / occupational use only. Occupational exposures are governed by the federal Hazard Communication Standard (29 CFR 1910.1200) and are addressed under 27 CCR §25606; PE Energy distributes this product and relies on the manufacturer’s hazard determination per 29 CFR 1910.1200(d)(4). The manufacturer has not designated this product as requiring a Proposition 65 warning. California occupational purchasers should consult their employer’s HazCom program and OEHHA guidance. What is Sullair Sullube 02250181-422? Genuine Sullube 02250181-422 is a 5 liter jug of extended-life, polyglycol-base synthetic fluid: the factory-fill lubricant Sullair specifies for its stationary rotary screw air compressors. Sullube has been the standard Sullair lubricant for more than a quarter-century, with a track record of virtually no unscheduled downtime from lubricant failure. Package: 5 liter jug (~1.3 US gallons) OEM part number: 02250181-422 Base stock: Polyglycol (synthetic) Service life: 10,000 hours Flash point: 410°F (210°C): ASTM D93 (Dow SDS v14.0) Viscosity: 39.3 cSt @ 104°F (40°C); 7.3 cSt @ 212°F (100°C) Carryover: <1 ppm Which Sullair compressors use Sullube? Sullube is the factory-fill polyglycol fluid for Sullair stationary rotary screw compressors, including the LS-series, ST-series, and TS-series lineups. Consult your Sullair maintenance manual for the exact fluid specification for your model and serial number. The 5 liter jug is the convenience size for top-off service on small-to-mid-size installations. How long does Sullube last in service? Sullube is rated for a 10,000-hour service life under normal operating conditions, which is roughly four to five times the change interval of conventional petroleum-based compressor lubricants. Actual interval depends on ambient temperature, duty cycle, intake air quality, and condensate management. Regular oil analysis is recommended to confirm change intervals on heavily loaded units. Why use Sullube polyglycol synthetic fluid? Resists sludge and varnish formation; actively removes existing varnish from internal compressor surfaces High thermal conductivity: runs cooler and stabilizes operating temperature, reducing thermal stress on bearings and seals Low carryover (<1 ppm): less fluid consumption between top-offs, cleaner downstream air Condensate is inherently biodegradable per OECD 302B (86%): simpler condensate handling and disposal. Note: does not meet OECD 301 readily-biodegradable criteria. Compatible with common elastomers in compressor seals, hoses, and solenoids: converts cleanly from many other manufacturer fluids Regular use of Genuine Sullube helps protect and maintain your Sullair warranty. Sullube is a registered trademark of Hitachi Global Air Power US, LLC. -

Sullair 02250196-470 Fl, Pristine Fg- 5 Gal
Sullair 02250196-470: Fl, Pristine Fg- 5 GalEngineered for the heat rejection demands of compressed air systems, this genuine Sullair cooling component maintains safe operating temperatures. Overheating is the leading cause of premature compressor failure: maintaining OEM cooling components is critical for equipment longevity.Fits Sullair models: LS25S, V250S. OEM service interval: 24 gallons for 250 hp OR 35 gallons for 350 hp.Sullair coolers are engineered with the correct core geometry, fin density, and material specifications for each compressor model.Request a quote for pricing and availability on Sullair part number 02250196-470. -

Sullair 02250223-877 Lubt, Oil Sullair Cll I 55 Gal
Sullair 02250223-877: Lubt, Oil Sullair Cll I 55 GalThis Sullair cooling part is designed to dissipate the heat generated during compression, protecting the airend, lubricant, and downstream air quality. Oil cooling is critical for maintaining lubricant viscosity and preventing thermal breakdown that produces varnish, sludge, and bearing damage.Fits Sullair models: TRA,TRX,TR.Sullair coolers are engineered with the correct core geometry, fin density, and material specifications for each compressor model.Request a quote for pricing and availability on Sullair part number 02250223-877. -

Sullair 250019-662 Fl, Srf 1/4000 5 Gal Pail
Sullair 250019-662: Fl, Srf 1/4000 5 Gal PailThis Sullair cooling part is designed to dissipate the heat generated during compression, protecting the airend, lubricant, and downstream air quality. Overheating is the leading cause of premature compressor failure: maintaining OEM cooling components is critical for equipment longevity.Fits Sullair models: 3000P, 4500, 4500B P12, LS10, Model 10, Model 12 & 16, Model 20, 25, RSVS 10 & 12, RSVS 16 & 20, SN 4500P-7500. OEM service interval: 10 gallons sump - Every 8000 hrs OR 1x/Year.Sullair coolers are engineered with the correct core geometry, fin density, and material specifications for each compressor model.Request a quote for pricing and availability on Sullair part number 250019-662. -

Sullair 250022-669 Sullube Compressor Fluid – 5 Gallon Pail
$797.68⚠ WARNING — H361 Reproductive Toxicity Cat 2 · California Proposition 65 disclosure applies · Download SDS (PDF) before handling · full safety + regulatory details below Safety, hazard, regulatory & reseller information (click to expand / collapse) Hazard identification (mirrored from manufacturer SDS) Signal word: WARNINGGHS classification: Reproductive Toxicity, Category 2 (per OSHA Hazard Communication Standard, 29 CFR 1910.1200; driven by alkylated diphenylamine CAS 68411-46-1 at 3–7% concentration)Hazard statement: H361 — Suspected of damaging fertility or the unborn child Precautionary statements (full GHS label) P201 — Obtain special instructions before use. P202 — Do not handle until all safety precautions have been read and understood. P280 — Wear protective gloves, protective clothing, eye protection and face protection. P308 + P313 — IF exposed or concerned: Get medical advice / attention. P405 — Store locked up. P501 — Dispose of contents / container to an approved waste disposal plant. Channel of trade Industrial / occupational use only — sold to trained personnel for use in compliance with 29 CFR 1910.1200. Not intended for consumer sale. Occupational exposures are addressed under the federal HazCom standard (27 CCR §25606) rather than the Proposition 65 consumer warning regime. Waste handling responsibility Used compressor lubricant may be regulated as hazardous waste depending on contamination, mixture, and jurisdiction. Purchaser is responsible for waste characterization and disposal per the Resource Conservation and Recovery Act (40 CFR Part 262) and any applicable state and local regulations. Do not pour to drains, soil, or surface water. Safety Data Sheet & reseller posture The controlling Safety Data Sheet is the unmodified manufacturer PDF: Download Sullube SDS (Dow v14.0, 2025-07-25, PDF). The SDS is also delivered with order confirmation per OSHA 29 CFR 1910.1200(g)(7). PE Energy Industrial Supply is a distributor of this product and relies on the manufacturer’s hazard determination per 29 CFR 1910.1200(d)(4). Manufacturer: The Dow Chemical Company; product brand owner: Hitachi Global Air Power US, LLC (sold as “Sullube” through Sullair). For 24-hour chemical emergency: CHEMTREC +1-800-424-9300. California Proposition 65 notice This product is sold for industrial / occupational use only. Occupational exposures are governed by the federal Hazard Communication Standard (29 CFR 1910.1200) and are addressed under 27 CCR §25606; PE Energy distributes this product and relies on the manufacturer’s hazard determination per 29 CFR 1910.1200(d)(4). The manufacturer has not designated this product as requiring a Proposition 65 warning. California occupational purchasers should consult their employer’s HazCom program and OEHHA guidance. What is Sullair Sullube 250022-669? Genuine Sullube 250022-669 is a 5 US gallon (18.9 liter) pail of extended-life, polyglycol-base synthetic fluid: the factory-fill lubricant Sullair specifies for its stationary rotary screw air compressors. The 5-gallon pail is the standard maintenance package for small-to-mid-size Sullair installations. Package: 5 US gallon pail (18.9 liters) OEM part number: 250022-669 Base stock: Polyglycol (synthetic) Service life: 10,000 hours Flash point: 410°F (210°C): ASTM D93 (Dow SDS v14.0) Viscosity: 39.3 cSt @ 104°F (40°C); 7.3 cSt @ 212°F (100°C) Carryover: <1 ppm Which Sullair compressors use Sullube? Sullube is the factory-fill polyglycol fluid for Sullair stationary rotary screw compressors, including the LS-series, ST-series, and TS-series lineups. Consult your Sullair maintenance manual for the exact fluid specification for your model and serial number. The 5 gallon pail covers a typical fluid change on most small-to-mid-frame Sullair units. How long does Sullube last in service? Sullube is rated for a 10,000-hour service life under normal operating conditions, which is roughly four to five times the change interval of conventional petroleum-based compressor lubricants. Actual interval depends on ambient temperature, duty cycle, intake air quality, and condensate management. Regular oil analysis is recommended to confirm change intervals on heavily loaded units. Why use Sullube polyglycol synthetic fluid? Resists sludge and varnish formation; actively removes existing varnish from internal compressor surfaces High thermal conductivity: runs cooler and stabilizes operating temperature, reducing thermal stress on bearings and seals Low carryover (<1 ppm): less fluid consumption between top-offs, cleaner downstream air Condensate is inherently biodegradable per OECD 302B (86%): simpler condensate handling and disposal. Note: does not meet OECD 301 readily-biodegradable criteria. Compatible with common elastomers in compressor seals, hoses, and solenoids: converts cleanly from many other manufacturer fluids Regular use of Genuine Sullube helps protect and maintain your Sullair warranty. Sullube is a registered trademark of Hitachi Global Air Power US, LLC. -

Sullair 250022-670 Sullube Compressor Fluid – 55 Gallon Drum
$8,515.00Drum orders — freight quote recommended A 55-gallon drum ships LTL freight, not parcel. We recommend confirming your freight terms (liftgate, residential, transit) before checkout. Real-time LTL pricing varies materially by zip code, dock availability, and accessorials. ✉ Request Drum Freight Quoteor call +1 (281) 310-0628 Add-to-cart is enabled below for buyers with an existing freight account or a known dock-to-dock terminal arrangement. Drum shipping specs at a glance Ships from: Houston, TX 77032 Gross weight: ~525 lb (drum + 55 gal Sullube) Class / mode: LTL motor freight, not regulated for DOT transport (SDS §14) Transit: typically 3–7 business days CONUS from order acceptance to dock arrival Liftgate: available on request — surcharge applies if delivery dock not equipped Residential / limited-access: call for surcharge quote before purchase Lead time: in-stock at Houston DC; expedite options available — ask in your quote request ⚠ WARNING — H361 Reproductive Toxicity Cat 2 · California Proposition 65 disclosure applies · Download SDS (PDF) before handling · full safety + regulatory details below Safety, hazard, regulatory & reseller information (click to expand / collapse) Hazard identification (mirrored from manufacturer SDS) Signal word: WARNINGGHS classification: Reproductive Toxicity, Category 2 (per OSHA Hazard Communication Standard, 29 CFR 1910.1200; driven by alkylated diphenylamine CAS 68411-46-1 at 3–7% concentration)Hazard statement: H361 — Suspected of damaging fertility or the unborn child Precautionary statements (full GHS label) P201 — Obtain special instructions before use. P202 — Do not handle until all safety precautions have been read and understood. P280 — Wear protective gloves, protective clothing, eye protection and face protection. P308 + P313 — IF exposed or concerned: Get medical advice / attention. P405 — Store locked up. P501 — Dispose of contents / container to an approved waste disposal plant. Channel of trade Industrial / occupational use only — sold to trained personnel for use in compliance with 29 CFR 1910.1200. Not intended for consumer sale. Occupational exposures are addressed under the federal HazCom standard (27 CCR §25606) rather than the Proposition 65 consumer warning regime. Waste handling responsibility Used compressor lubricant may be regulated as hazardous waste depending on contamination, mixture, and jurisdiction. Purchaser is responsible for waste characterization and disposal per the Resource Conservation and Recovery Act (40 CFR Part 262) and any applicable state and local regulations. Do not pour to drains, soil, or surface water. Safety Data Sheet & reseller posture The controlling Safety Data Sheet is the unmodified manufacturer PDF: Download Sullube SDS (Dow v14.0, 2025-07-25, PDF). The SDS is also delivered with order confirmation per OSHA 29 CFR 1910.1200(g)(7). PE Energy Industrial Supply is a distributor of this product and relies on the manufacturer’s hazard determination per 29 CFR 1910.1200(d)(4). Manufacturer: The Dow Chemical Company; product brand owner: Hitachi Global Air Power US, LLC (sold as “Sullube” through Sullair). For 24-hour chemical emergency: CHEMTREC +1-800-424-9300. California Proposition 65 notice This product is sold for industrial / occupational use only. Occupational exposures are governed by the federal Hazard Communication Standard (29 CFR 1910.1200) and are addressed under 27 CCR §25606; PE Energy distributes this product and relies on the manufacturer’s hazard determination per 29 CFR 1910.1200(d)(4). The manufacturer has not designated this product as requiring a Proposition 65 warning. California occupational purchasers should consult their employer’s HazCom program and OEHHA guidance. What is Sullair Sullube 250022-670? Genuine Sullube 250022-670 is a 55 US gallon (189 liter) drum of extended-life, polyglycol-base synthetic fluid: the factory-fill lubricant Sullair specifies for its stationary rotary screw air compressors. The 55-gallon drum is the bulk package for fleet maintenance and high-volume Sullair installations. Package: 55 US gallon drum (189 liters) OEM part number: 250022-670 Base stock: Polyglycol (synthetic) Service life: 10,000 hours Flash point: 410°F (210°C): ASTM D93 (Dow SDS v14.0) Viscosity: 39.3 cSt @ 104°F (40°C); 7.3 cSt @ 212°F (100°C) Carryover: <1 ppm Which Sullair compressors use Sullube? Sullube is the factory-fill polyglycol fluid for Sullair stationary rotary screw compressors, including the LS-series, ST-series, and TS-series lineups. Consult your Sullair maintenance manual for the exact fluid specification for your model and serial number. The 55 gallon drum is sized for multi-unit fleet service and large-frame Sullair installations. How long does Sullube last in service? Sullube is rated for a 10,000-hour service life under normal operating conditions, which is roughly four to five times the change interval of conventional petroleum-based compressor lubricants. Actual interval depends on ambient temperature, duty cycle, intake air quality, and condensate management. Regular oil analysis is recommended to confirm change intervals on heavily loaded units. Why use Sullube polyglycol synthetic fluid? Resists sludge and varnish formation; actively removes existing varnish from internal compressor surfaces High thermal conductivity: runs cooler and stabilizes operating temperature, reducing thermal stress on bearings and seals Low carryover (<1 ppm): less fluid consumption between top-offs, cleaner downstream air Condensate is inherently biodegradable per OECD 302B (86%): simpler condensate handling and disposal. Note: does not meet OECD 301 readily-biodegradable criteria. Compatible with common elastomers in compressor seals, hoses, and solenoids: converts cleanly from many other manufacturer fluids Regular use of Genuine Sullube helps protect and maintain your Sullair warranty. Sullube is a registered trademark of Hitachi Global Air Power US, LLC. -

Sullair 250030-757 Lubt, Awf 5 Gal.
Sullair 250030-757: Lubt, Awf 5 Gal.This OEM Sullair thermal management part ensures proper heat dissipation in your compressor, preventing the elevated temperatures that cause premature failure. Overheating is the leading cause of premature compressor failure: maintaining OEM cooling components is critical for equipment longevity.Fits Sullair models: DSP 132-160, DSP 22-37, DSP 45-75, DSP 90-110, SRL 1.5MB-SRL 5.5MB.Sullair coolers are engineered with the correct core geometry, fin density, and material specifications for each compressor model.Request a quote for pricing and availability on Sullair part number 250030-757.