Sullair Air Compressors

Sullair ShopTek® air compressors redefine industry standards for continuous-duty compressors in the 5 to 100 hp range. Designed with the end customer in mind, ShopTek compressors feature a small footprint and are built to provide exceptional reliability and extremely low maintenance. Reliable Sullair Air End Patented rotor design Bearing fluid reservoirs Long life bearings Sound Enclosure for Quiet Operation Reduces sound levels to as low as 66 dBA Easily removable for service Intelligent Electronic Controls ShopTek® compressors are fitted with the latest technology microprocessor controller to ensure uniform operation and uninterrupted production. Deluxe Monitoring All essential compressor parameters are conveniently displayed on the controller. Pressure is controlled using transducers to minimize off-load running and reduce over-compression to help ensure optimum performance and savings in energy costs. Energy Efficient Features All ShopTek motors are designed for improved energy efficiency and a compact footprint. That’s why Sullair provides premium efficient motors as standard. Plus, the Sullair air end is designed to deliver maximum output with minimum power consumption, giving ShopTek compressors a superior energy advantage. The Sullair Standard Higher Than the Industry Standard All ShopTek compressors are factory-filled with biodegradable Genuine Sullube® 10,000 hour fluid. Protects and cleans (no varnish) Controls operating temperatures Optimal viscosity Environmentally friendly Reduces fluid loss High flash point (263 ̊ C) ShopTek compressors are covered by the 5-year Emerald Warranty – which provides coverage on major components including: Air end Air/fluid receiver Main Drive Motor Fluid cooler Aftercooler Legendary Sullair Air End A continuous supply of compressed air. It’s your biggest expectation in an air compressor. The legendary Sullair air end, at the heart of tens of thousands of compressors worldwide, will help keep your operation pumping, worry-free. Proven Reliability Bulletproof. It’s a word often used in conjunction with the Sullair air end. Although the principle of rotary screw compression remains the same, as does the durability, Sullair continuously improves the materials, engineering and design of its air ends and compressor packages. Longer Air End Life Controlled pressure lubrication and bearing fluid reservoirs assure a reliable fluid supply of rotating elements – helping extend air end life. ShopTek Performance Air System All ShopTek 5–20 hp compressors may be upgraded to the ShopTek Performance Air System by adding matching dryers, filters and receiver tanks. The Performance Air System includes a ShopTek compressor, a refrigerated dryer, a liquid and particulate filter, and a receiver tank. All components of the system have been perfectly sized to provide maximum performance. Plus, the Performance Air System is simple to install and requires minimum floor space. Features of the Receiver Tank Include: ASME and CRN approved 80 and 120-gallon tank availability Pressure relief and ball valve as standard Clean, Dry Air is Essential Quality air treatment – the removal of condensate and particulate — is essential to protect your plant air system and air-using equipment. Plus, quality air can help improve the quality of your product and process. The Performance Air System helps achieve your goals with: Matched refrigerated dryer — to help remove water vapor found in compressed air. The Sullair dryer features an oversized demister separator, dew point indicator and easy drain access. And the unit features environmentally compatible refrigerant. High-efficiency filter — to help remove particles down to 1.0 micron. The filter also helps to remove coalesced liquid and lubricants. Specifications (base mounted) Motor hp: 15 kW: 11Capacity acfm*: 63.5 m3/min: 1.8Pressure psig: 125 bar: 9dBA: 69* acfm measured in accordance with ISO1217, Annex C Length in: 39.3 mm: 998.2Width in: 24.3 mm: 617.2Height in: 40.7 mm: 1033.8Weight lbs: 772 kg: 350.2   Tank Mount Length in: 66 mm: 1676.4Width in: 25.5 mm: 647.7 Height in: 71.5 mm: 1816.1Weight lbs: 1192 kg: 540.7 Tank Mount with Dryer and Filter Length in: 66 mm: 1676.4Width in: 25.5 mm: 647.7 Height in: 71.5 mm: 1816.1Weight lbs: 1288 kg: 584.2 Part Numbers ST1109- Air Compressor ST1109R - Air Compressor and receiver tank ST1109RD - Air Compressor, receiver tank, dryer and filter 175 psig / 12 bar version of this air compressor is available upon request. Contact us for a quote. Part Numbers ST1112- Air Compressor ST1112R - Air Compressor and receiver tank ST1112RD - Air Compressor, receiver tank, dryer and filter

Sullair ShopTek® air compressors redefine industry standards for continuous-duty compressors in the 5 to 100 hp range. Designed with the end customer in mind, ShopTek compressors feature a small footprint and are built to provide exceptional reliability and extremely low maintenance. Reliable Sullair Air End Patented rotor design Bearing fluid reservoirs Long life bearings Sound Enclosure for Quiet Operation Reduces sound levels to as low as 66 dBA Easily removable for service Intelligent Electronic Controls ShopTek® compressors are fitted with the latest technology microprocessor controller to ensure uniform operation and uninterrupted production. Deluxe Monitoring All essential compressor parameters are conveniently displayed on the controller. Pressure is controlled using transducers to minimize off-load running and reduce over-compression to help ensure optimum performance and savings in energy costs. Energy Efficient Features All ShopTek motors are designed for improved energy efficiency and a compact footprint. That’s why Sullair provides premium efficient motors as standard. Plus, the Sullair air end is designed to deliver maximum output with minimum power consumption, giving ShopTek compressors a superior energy advantage. The Sullair Standard Higher Than the Industry Standard All ShopTek compressors are factory-filled with biodegradable Genuine Sullube® 10,000 hour fluid. Protects and cleans (no varnish) Controls operating temperatures Optimal viscosity Environmentally friendly Reduces fluid loss High flash point (263 ̊ C) ShopTek compressors are covered by the 5-year Emerald Warranty – which provides coverage on major components including: Air end Air/fluid receiver Main Drive Motor Fluid cooler Aftercooler Legendary Sullair Air End A continuous supply of compressed air. It’s your biggest expectation in an air compressor. The legendary Sullair air end, at the heart of tens of thousands of compressors worldwide, will help keep your operation pumping, worry-free. Proven Reliability Bulletproof. It’s a word often used in conjunction with the Sullair air end. Although the principle of rotary screw compression remains the same, as does the durability, Sullair continuously improves the materials, engineering and design of its air ends and compressor packages. Longer Air End Life Controlled pressure lubrication and bearing fluid reservoirs assure a reliable fluid supply of rotating elements – helping extend air end life. ShopTek Performance Air System All ShopTek 5–20 hp compressors may be upgraded to the ShopTek Performance Air System by adding matching dryers, filters and receiver tanks. The Performance Air System includes a ShopTek compressor, a refrigerated dryer, a liquid and particulate filter, and a receiver tank. All components of the system have been perfectly sized to provide maximum performance. Plus, the Performance Air System is simple to install and requires minimum floor space. Features of the Receiver Tank Include: ASME and CRN approved 80 and 120-gallon tank availability Pressure relief and ball valve as standard Clean, Dry Air is Essential Quality air treatment – the removal of condensate and particulate — is essential to protect your plant air system and air-using equipment. Plus, quality air can help improve the quality of your product and process. The Performance Air System helps achieve your goals with: Matched refrigerated dryer — to help remove water vapor found in compressed air. The Sullair dryer features an oversized demister separator, dew point indicator and easy drain access. And the unit features environmentally compatible refrigerant. High-efficiency filter — to help remove particles down to 1.0 micron. The filter also helps to remove coalesced liquid and lubricants. Specifications Motor hp: 30 kW: 22Capacity acfm*: 127 m3/min: 3.6Pressure psig: 115 bar: 8dBA: 75 * acfm measured in accordance with ISO1217, Annex C Length in: 53 mm: 1340Width in: 29 mm: 740Height  in: 51 mm: 1300Weight lbs: 1433 kg: 650 How often does a Sullair ShopTek ST2200 need an oil change?Sullair’s standard stationary-compressor service schedule lists an extended-life polyglycol fluid change at approximately 8,000 hours when running Sullube under normal conditions, with oil-filter replacement at the same interval. The exact interval for your ST2200 depends on ambient temperature, intake air quality, and duty cycle — always confirm against your unit’s operator manual and serial-number-specific service schedule.Source & deviations: Sullube’s 8,000–10,000h rating is from Dow SDS v14.0, Section 9 (polyglycol synthetic base, <1 ppm carryover, 39.3 cSt @ 40°C). Field-reported deviations: high-humidity install sites and 24/7 duty cycles routinely cut intervals 30–50%; sandblast/mill-yard intake environments cut air-filter intervals roughly in half independent of the oil change. Track real hours via the ShopTek microprocessor controller — don’t rely on calendar service.Which Sullube container size fits a ShopTek ST2200 oil change?A single ShopTek ST2200 oil change holds roughly 2–5 gallons of Sullube depending on the configuration (air-end sump + cooler + lines); the 5-gallon pail (250022-669) is the right standard refill quantity for one service event. The 5-liter jug (02250181-422) is top-off only; the 55-gallon drum is for multi-unit fleets or shops servicing 8–10+ units annually.Sullair 250022-669 Sullube 5-Gallon Pail — OEM-spec polyglycol fluid, 1-service quantity — recommended for ST2200 standard serviceSullair 02250181-422 Sullube 5-Liter Jug — top-off between scheduled servicesSullair 250022-670 Sullube 55-Gallon Drum — bulk for fleets — LTL freightBrowse all Sullair compressor fluid →When does the air / oil separator on a ShopTek ST2200 actually fail?Sullair specifies separator replacement at the scheduled service interval, but real-world failure usually presents earlier as oil carryover downstream — visible as oil in the receiver tank, oily condensate at the dryer, or oil sheen on plant air-line drip-legs. Don’t wait for a controller alarm if you see those symptoms; a degraded separator gets worse fast.Why the timing matters: downstream consequences of running past a degraded separator include contamination of refrigerated and desiccant air dryers (rebuild or replacement of a single 25–30 SCFM dryer is a four-figure expense), fouled pneumatic tool oilers, and increased oil consumption that masks as “higher fluid usage” on the maintenance log. The Sullair separator SKU catalog includes ShopTek-class elements; quote your serial number for the exact part number Sullair publishes for your unit.Which Sullair parts categories cover ShopTek ST2200 scheduled maintenance?PE Energy stocks Sullube fluid and lists 3,500+ Sullair parts across the categories below. For ShopTek ST2200 scheduled maintenance, you’ll pull from oil filters, air filters, separators, and service-kit categories; if you have the OEM part number from your Sullair maintenance manual, search by SKU.Sullair Oil Filters — 175+ SKUs covering ShopTek, LS-series, Portable, and S-energy linesSullair Air Filters — 385+ intake filter SKUs across the Sullair lineup; replace 1–2× per oil change in dusty environmentsSullair Air / Oil Separators — 130+ separator SKUs; replace at Sullair-specified interval or sooner if downstream oil carryover appearsSullair Service Kits — 2,800+ scheduled-maintenance kits, often the cheapest path for major-interval service vs sourcing components individuallyDo I have to use genuine Sullair parts to keep my ST2200 warranty?Sullair’s commercial warranty requires the use of genuine Sullair lubricant and OEM-approved consumables (filters, separators) for warranty claims on the air-end and main drive components; aftermarket polyglycol fluids that don’t carry Sullair’s approval invalidate the air-end warranty in most framework agreements. Check your purchase contract and Sullair warranty registration for the exact language for your installation.Why aftermarket lube matters more than aftermarket filters: Sullube is a polyglycol-base synthetic with very different chemistry from PAO or mineral oils — mixing or substituting aftermarket fluid causes elastomer swelling in seals, varnish in valves, and accelerated bearing wear. The Sullube SDS v14.0 Section 16 documents the unique base chemistry; aftermarket “Sullair-compatible” polyglycols are not always tested against Sullair’s seal-compatibility spec.Where do I get ShopTek-specific parts that aren’t in the catalog?Some ShopTek-line parts (control-panel consumables, model-year specific gaskets, particular regional voltage variants) are quote-only because Sullair distributes them through authorized dealer channels with serial-number verification. Send your OEM part number, model variant, and serial number — we’ll source it and quote freight from our Houston, TX DC.Request a ShopTek ST2200 parts quoteSame-day response Mon–Fri 08:00–17:30 Central. Include your unit serial number for the fastest match against Sullair’s parts list.✉ Request ShopTek Parts Quoteor call +1 (281) 310-0628

Sullair ShopTek® air compressors redefine industry standards for continuous-duty compressors in the 5 to 100 hp range. Designed with the end customer in mind, ShopTek compressors feature a small footprint and are built to provide exceptional reliability and extremely low maintenance. Reliable Sullair Air End Patented rotor design Bearing fluid reservoirs Long life bearings Sound Enclosure for Quiet Operation Reduces sound levels to as low as 66 dBA Easily removable for service Intelligent Electronic Controls ShopTek® compressors are fitted with the latest technology microprocessor controller to ensure uniform operation and uninterrupted production. Deluxe Monitoring All essential compressor parameters are conveniently displayed on the controller. Pressure is controlled using transducers to minimize off-load running and reduce over-compression to help ensure optimum performance and savings in energy costs. Energy Efficient Features All ShopTek motors are designed for improved energy efficiency and a compact footprint. That’s why Sullair provides premium efficient motors as standard. Plus, the Sullair air end is designed to deliver maximum output with minimum power consumption, giving ShopTek compressors a superior energy advantage. The Sullair Standard Higher Than the Industry Standard All ShopTek compressors are factory-filled with biodegradable Genuine Sullube® 10,000 hour fluid. Protects and cleans (no varnish) Controls operating temperatures Optimal viscosity Environmentally friendly Reduces fluid loss High flash point (263 ̊ C) ShopTek compressors are covered by the 5-year Emerald Warranty – which provides coverage on major components including: Air end Air/fluid receiver Main Drive Motor Fluid cooler Aftercooler Legendary Sullair Air End A continuous supply of compressed air. It’s your biggest expectation in an air compressor. The legendary Sullair air end, at the heart of tens of thousands of compressors worldwide, will help keep your operation pumping, worry-free. Proven Reliability Bulletproof. It’s a word often used in conjunction with the Sullair air end. Although the principle of rotary screw compression remains the same, as does the durability, Sullair continuously improves the materials, engineering and design of its air ends and compressor packages. Longer Air End Life Controlled pressure lubrication and bearing fluid reservoirs assure a reliable fluid supply of rotating elements – helping extend air end life. ShopTek Performance Air System All ShopTek 5–20 hp compressors may be upgraded to the ShopTek Performance Air System by adding matching dryers, filters and receiver tanks. The Performance Air System includes a ShopTek compressor, a refrigerated dryer, a liquid and particulate filter, and a receiver tank. All components of the system have been perfectly sized to provide maximum performance. Plus, the Performance Air System is simple to install and requires minimum floor space. Features of the Receiver Tank Include: ASME and CRN approved 80 and 120-gallon tank availability Pressure relief and ball valve as standard Clean, Dry Air is Essential Quality air treatment – the removal of condensate and particulate — is essential to protect your plant air system and air-using equipment. Plus, quality air can help improve the quality of your product and process. The Performance Air System helps achieve your goals with: Matched refrigerated dryer — to help remove water vapor found in compressed air. The Sullair dryer features an oversized demister separator, dew point indicator and easy drain access. And the unit features environmentally compatible refrigerant. High-efficiency filter — to help remove particles down to 1.0 micron. The filter also helps to remove coalesced liquid and lubricants. Specifications (base mounted) Motor hp: 5 kW: 4Capacity acfm*: 16 m3/min: 0.47Pressure psig: 150 bar: 10 dBA: 66 * acfm measured in accordance with ISO1217, Annex C Length in: 32.5 mm: 825.5Width in: 21.5 mm: 546.1Height in: 37 mm: 939.8 Weight lbs: 524 kg: 237.7   Tank Mount Length in: 64 mm: 1625.6Width in: 23 mm: 584.2 Height in: 63 mm: 1600.2Weight lbs: 854 kg: 387.4 Tank Mount with Dryer and Filter Length in: 64 mm: 1625.6Width in: 23 mm: 584.2 Height in: 63 mm: 1600.2Weight lbs: 935 kg: 424.1 Part Numbers ST410 - Air Compressor ST410R - Air Compressor and receiver tank ST410RD - Air Compressor, receiver tank, dryer and filter