Whitmore
Showing 676–720 of 981 results
-
OPEN CHAIN LUBRICANT PAIL Chain and Cable Lubricants
Whitmore's Open Chain Lubricant is specifically formulated to meet the exacting lubrication requirements of chain drives. Its penetrating action draws the lubricant to the pins and bushings of a chain where lubrication is most needed. It quickly displaces moisture and contaminants, while preventing rust and corrosion. Whitmore's Open Chain Lubricant is also available in an aerosol spray container. The solvent propellant has been removed, making Open Chain Lubricant environmentally safer and TCLPSAFE. BENEFITS: PROTECTS - against rust and corrosion. IMPROVES HOUSEKEEPING - less sling-off. SMOOTHER AND QUIETER - chains run smoother and quieter. APPLICATION - applied manually or via automatic systems. OPERATING RANGE – From -25°F (-32°C) to 200°F (95°C) APPLICATIONS: Open Chain Lubricant is ideal for chain drives of all sizes. It may also be used on wire ropes up to 2” in diameter. (For larger ropes use Whitmore’s Wire Rope Lubricant). Open Chain Lubricant is packaged in a variety of containers as well as convenient aerosol spray to suit any application. Whitmore's Open Chain Lubricant may be applied either by dipping, spraying or dripping. Size and Type Container: Pail Weight: 38 LBS. -
PARAGON GOLD ISO 1000 Drum Enclosed Gear Oils
$3,048.60Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Drum Weight: 448 LBS. -
PARAGON GOLD ISO 1000 One Way Tote Enclosed Gear Oils
Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: One Way Tote Weight: 1,998 LBS. -
PARAGON GOLD ISO 1000 P2 Enclosed Gear Oils
$13,769.50Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: P2 Weight: 1,994 LBS. -
Paragon Gold ISO 1000 Pail Enclosed Gear Oils
$268.11Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Pail Weight: 38 LBS. -
PARAGON GOLD ISO 1500 Drum Enclosed Gear Oils
$3,655.29Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Drum Weight: 448 LBS. -
Paragon Gold ISO 1500 Keg Enclosed Gear Oils
$1,177.86Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Keg Weight: 133 LBS. -
PARAGON GOLD ISO 1500 One Way Tote Enclosed Gear Oils
Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: One Way Tote Weight: 1,998 LBS. -
PARAGON GOLD ISO 1500 Pail Enclosed Gear Oils
$327.79Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Pail Weight: 38 LBS. -
Paragon Gold ISO 1500 Tote Enclosed Gear Oils
$3,655.29Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Tote Weight: 1990 LBS. -
PARAGON GOLD ISO 220 Drum Enclosed Gear Oils
$2,654.14Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Drum Weight: 448 LBS. -
Paragon Gold ISO 220 Keg Enclosed Gear Oils
$884.83Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Keg Weight: 133 LBS. -
PARAGON GOLD ISO 220 P2 Enclosed Gear Oils
$11,975.16Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: P2 Weight: 1,994 LBS. -
Paragon Gold ISO 220 Pail Enclosed Gear Oils
$242.32Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Pail Weight: 38 LBS. -
PARAGON GOLD ISO 320 Drum Enclosed Gear Oils
$2,767.05Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Drum Weight: 448 LBS. -
Paragon Gold ISO 320 Keg Enclosed Gear Oils
$917.88Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Keg Weight: 133 LBS. -
PARAGON GOLD ISO 320 One Way Tote Enclosed Gear Oils
Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: One Way Tote Weight: 1,998 LBS. -
PARAGON GOLD ISO 320 P2 Enclosed Gear Oils
$12,488.78Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: P2 Weight: 1,994 LBS. -
PARAGON GOLD ISO 320 Pail Enclosed Gear Oils
$251.97Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Pail Weight: 38 LBS. -
PARAGON GOLD ISO 460 Drum Enclosed Gear Oils
$2,193.97Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Drum Weight: 448 LBS. -
Paragon Gold ISO 460 Keg Enclosed Gear Oils
$814.36Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Keg Weight: 133 LBS. -
PARAGON GOLD ISO 460 Pail Enclosed Gear Oils
$221.78Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Pail Weight: 38 LBS. -
Paragon Gold ISO 460 Tote Enclosed Gear Oils
$10,879.94Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Pail Weight: 38 LBS. -
PARAGON GOLD ISO 680 Drum Enclosed Gear Oils
$2,632.34Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Drum Weight: 448 LBS. -
PARAGON GOLD ISO 680 P2 Enclosed Gear Oils
$11,213.46Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: P2 Weight: 1,994 LBS. -
PARAGON GOLD ISO 680 Pail Enclosed Gear Oils
Paragon Gold is a "eutectic" type gear oil formulated for use in all gearboxes, but especially where excessive wear and short component life drive up operating costs. Inadequately lubricated gears and bearings can experience scuffing under high load. Scuffing occurs when the tips of opposing asperities momentarily weld. The extreme pressure and anti-wear additives used in Paragon Gold stops scuffing by forming a protective chemical layer in the area of contact. The surfaces continue to experience high load, but rather than micro welding, they are made smoother by the pressure. The eutectic smoothing effect of Paragon Gold will also partially flatten pre-existing wear damage, usually within a few hundred hours of operation. Condemned equipment can stay in service indefinitely, or until a scheduled shutdown. Pitting is also stopped by the use of Paragon Gold. Pitting is caused by metal fatigue and metal fatigue is minimized when the load is carried by a smoother surface. Some “initial pitting” may still occur when Paragon Gold is used, especially where there is misalignment. All viscosity grades of Paragon Gold meet the requirements of DIN 51517-3. BENEFITS: WEAR PROTECTION - stops wear under a wide variety of operating conditions, including the most severe load. SMOOTHING OF SURFACES - smoothes contact surfaces of bearings and gears under load. LONG COMPONENT LIFE - lab testing has revealed extremely low wear and friction levels using Paragon Gold. Field-testing has verified outstanding wear protection. LONG OIL LIFE - Highly resistant to oxidation, a major cause of reduced lubricant life. RUST PROTECTION - leaves a film on gears that remains in place during long shutdown periods. This coating prevents rust and ensures a lubricating film at startup. CLEAN - low-sludge additive system ensures components remain clean and free of deposits for years of operation. APPLICATIONS: Use Paragon Gold where conventional gear oils fail, where long component life is essential, or where long intervals between oil changes are unavoidable. Suitable applications can be found in almost any industry Size and Type Container: Pail Weight: 38 LBS. -
PARAGON ISO 68 Drum Enclosed Gear Oils
$2,320.91Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Drum Weight: 438 LBS. -
PARAGON ISO 68 Pail Enclosed Gear Oils
$221.21Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Pail Weight: 38 LBS. -
PARAGON ISO 100 Drum Enclosed Gear Oils
$2,507.15Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Drum Weight: 448 LBS. -
Paragon ISO 100 Keg Enclosed Gear Oils
$832.85Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Keg Weight: 133 LBS. -
PARAGON ISO 100 Pail Enclosed Gear Oils
$228.35Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Pail Weight: 38 LBS. -
Paragon ISO 100 Tote Enclosed Gear Oils
$11,266.78Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Tote Weight: 1990 LBS. -
PARAGON ISO 1000 Drum Enclosed Gear Oils
$2,413.19Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Drum Weight: 448 LBS. -
Paragon ISO 1000 Keg Enclosed Gear Oils
$804.50Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Keg Weight: 133 LBS. -
PARAGON ISO 1000 OH Drum Enclosed Gear Oils
Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Drum Weight: 456 LBS. -
PARAGON ISO 1000 One Way Tote Enclosed Gear Oils
Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: One Way Tote Weight: 1,998 LBS. -
PARAGON ISO 1000 Pail Enclosed Gear Oils
$220.33Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Pail Weight: 38 LBS. -
Paragon ISO 1000 Tote Enclosed Gear Oils
$10,888.02Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Tote Weight: 1990 LBS. -
PARAGON ISO 150 Drum Enclosed Gear Oils
$2,527.86Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Drum Weight: 448 LBS. -
Paragon ISO 150 Keg Enclosed Gear Oils
$838.06Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Keg Weight: 133 LBS. -
PARAGON ISO 150 Pail Enclosed Gear Oils
$230.10Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Pail Weight: 38 LBS. -
Paragon ISO 150 Tote Enclosed Gear Oils
$11,360.97Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Tote Weight: 1990 LBS. -
PARAGON ISO 1500 Drum Enclosed Gear Oils
$2,200.87Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Drum Weight: 448 LBS. -
Paragon ISO 1500 Keg Enclosed Gear Oils
$742.36Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: Keg Weight: 133 LBS. -
PARAGON ISO 1500 One Way Tote Enclosed Gear Oils
Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion. Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore's Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications. All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3. BENEFITS: ANTIWEAR - protects even under severe conditions to extend gear life. ANTIFOAM - protects seals, lowers temperatures, and aids in extending oil life. LONG LIFE - Reduces disposal and overall cost. TACKY - allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns. APPLICATIONS: Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives. Size and Type Container: One Way Tote Weight: 1,998 LBS.