Lubriplate

The LUBRIPLATE "930" Series of lubricants are also listed as "multipurpose" but with a higher operating temperature range than the "630" Series. These lubricants possess high film strength and exceptional resistance to water, steam and other adverse operating conditions. Since these lubricants are of the non-melt type, they can be used successfully for high temperature applications up to 375°F and for short intervals up to 400°F. The LUBRIPLATE "930" Series of lubricants are shear stable multipurpose greases for both plain and antifriction bearings. These lubricants are recommended wherever Microgel greases or Bentone greases are recommended and used. LUBRIPLATE No. 930-A: is a heavy-body NLGI No. 3 lubricant for applications requiring a heavy type product such as grease cups. STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc. Data Sheet

The LUBRIPLATE "930" Series of lubricants are also listed as "multipurpose" but with a higher operating temperature range than the "630" Series. These lubricants possess high film strength and exceptional resistance to water, steam and other adverse operating conditions. Since these lubricants are of the non-melt type, they can be used successfully for high temperature applications up to 375°F and for short intervals up to 400°F. The LUBRIPLATE "930" Series of lubricants are shear stable multipurpose greases for both plain and antifriction bearings. These lubricants are recommended wherever Microgel greases or Bentone greases are recommended and used. LUBRIPLATE No. 930-AA: is an NLGI No. 1 lubricant highly recommended for automatic grease dispensing devices and pressure gun applications. LUBRIPLATE No. 930-AA is available in the convenient 15-ounce grease-gun cartridge. STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc. Data Sheet

The LUBRIPLATE "930" Series of lubricants are also listed as "multipurpose" but with a higher operating temperature range than the "630" Series. These lubricants possess high film strength and exceptional resistance to water, steam and other adverse operating conditions. Since these lubricants are of the non-melt type, they can be used successfully for high temperature applications up to 375°F and for short intervals up to 400°F. The LUBRIPLATE "930" Series of lubricants are shear stable multipurpose greases for both plain and antifriction bearings. These lubricants are recommended wherever Microgel greases or Bentone greases are recommended and used. LUBRIPLATE No. 930-AA: is an NLGI No. 1 lubricant highly recommended for automatic grease dispensing devices and pressure gun applications. LUBRIPLATE No. 930-AA is available in the convenient 15-ounce grease-gun cartridge. STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc. Data Sheet

The LUBRIPLATE "930" Series of lubricants are also listed as "multipurpose" but with a higher operating temperature range than the "630" Series. These lubricants possess high film strength and exceptional resistance to water, steam and other adverse operating conditions. Since these lubricants are of the non-melt type, they can be used successfully for high temperature applications up to 375°F and for short intervals up to 400°F. The LUBRIPLATE "930" Series of lubricants are shear stable multipurpose greases for both plain and antifriction bearings. These lubricants are recommended wherever Microgel greases or Bentone greases are recommended and used. LUBRIPLATE No. 930-AAA: is an NLGI No. 0 consistency and is ideal and recommended for centralized lubricating systems. This lubricant is also a superior grease for certain types of enclosed gear cases of medium speed and no seals STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc. Data Sheet

The LUBRIPLATE "930" Series of lubricants are also listed as "multipurpose" but with a higher operating temperature range than the "630" Series. These lubricants possess high film strength and exceptional resistance to water, steam and other adverse operating conditions. Since these lubricants are of the non-melt type, they can be used successfully for high temperature applications up to 375°F and for short intervals up to 400°F. The LUBRIPLATE "930" Series of lubricants are shear stable multipurpose greases for both plain and antifriction bearings. These lubricants are recommended wherever Microgel greases or Bentone greases are recommended and used. LUBRIPLATE No. 930-AAA: is an NLGI No. 0 consistency and is ideal and recommended for centralized lubricating systems. This lubricant is also a superior grease for certain types of enclosed gear cases of medium speed and no seals STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc. Data Sheet

The LUBRIPLATE "930" Series of lubricants are also listed as "multipurpose" but with a higher operating temperature range than the "630" Series. These lubricants possess high film strength and exceptional resistance to water, steam and other adverse operating conditions. Since these lubricants are of the non-melt type, they can be used successfully for high temperature applications up to 375°F and for short intervals up to 400°F. The LUBRIPLATE "930" Series of lubricants are shear stable multipurpose greases for both plain and antifriction bearings. These lubricants are recommended wherever Microgel greases or Bentone greases are recommended and used. LUBRIPLATE No. 930-2: is an NLGI No. 2 lubricant for general grease-gun applications and is also available in the convenient 15-ounce cartridge. STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc. Data Sheet

LUBRIPLATE No. 1200-2 is an NLGI No. 2 Grease especially designed to meet the ever-increasing requirements for higher film strength, higher operating temperatures, greater stability and longer lubricant life. LUBRIPLATE 1200-2 is formulated to adhere to and prevent the wear of moving parts ensuring superior lubrication and extended lubrication intervals For the fleet and truck operator: LUBRIPLATE No. 1200-2 was specifically designed as one lubricant to take care of wheel bearings, all chassis points including ball joints and universal joints, water pumps and fifth wheels. For the contractor, logger and miner: LUBRIPLATE No. 1200-2 is the ideal multipurpose lubricant for this heavy-duty construction equipment, providing outstanding film strength and adhesiveness for shock load protection as well as providing the utmost protection against mud and water. For the industrial user: LUBRIPLATE No. 1200-2 is an extremely stable, extreme pressure lubricant for a multiple number of uses, thus reducing lubricant inventories. ADVANTAGES Exceptional film strength Excellent shear stability especially at high operating temperatures Non-corrosive extreme pressure properties Highly waterproof Rust and corrosion inhibited Very good oxidation resistance even under high operating temperatures Long lasting protection over a wide range of environmental conditions METHODS OF APPLICATIONS Brush Grease Gun Automatic System Hand Pack Forced-feed lubricator COMPATIBILITY Recommended: Viton, High Nitrile Buna N, Teflon, Nylon Not Recommended: Neoprene, Low Nitrile Buna N, Acrylic pain STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc. Data Sheet

LUBRIPLATE No. 1200-2 is an NLGI No. 2 Grease especially designed to meet the ever-increasing requirements for higher film strength, higher operating temperatures, greater stability and longer lubricant life. LUBRIPLATE 1200-2 is formulated to adhere to and prevent the wear of moving parts ensuring superior lubrication and extended lubrication intervals For the fleet and truck operator: LUBRIPLATE No. 1200-2 was specifically designed as one lubricant to take care of wheel bearings, all chassis points including ball joints and universal joints, water pumps and fifth wheels. For the contractor, logger and miner: LUBRIPLATE No. 1200-2 is the ideal multipurpose lubricant for this heavy-duty construction equipment, providing outstanding film strength and adhesiveness for shock load protection as well as providing the utmost protection against mud and water. For the industrial user: LUBRIPLATE No. 1200-2 is an extremely stable, extreme pressure lubricant for a multiple number of uses, thus reducing lubricant inventories. ADVANTAGES Exceptional film strength Excellent shear stability especially at high operating temperatures Non-corrosive extreme pressure properties Highly waterproof Rust and corrosion inhibited Very good oxidation resistance even under high operating temperatures Long lasting protection over a wide range of environmental conditions METHODS OF APPLICATIONS Brush Grease Gun Automatic System Hand Pack Forced-feed lubricator COMPATIBILITY Recommended: Viton, High Nitrile Buna N, Teflon, Nylon Not Recommended: Neoprene, Low Nitrile Buna N, Acrylic pain STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc. Data Sheet

LUBRIPLATE No. 1240 Series of grease are designed for heavy-duty and severe service applications that call for continuous protection under heavy load, moisture and other environmental extremes. LUBRIPLATE No. 1241: is ideally suited for bushing and sleeve-type bearings especially in heavy load, tight tolerance applications to form a continuous film without sacrificing shear stability. ADVANTAGES Excellent extreme pressure anti-wear protection Extremely shear-stable for longer effective periods of lubrication Prevents fretting corrosion High temperature capabilities Very good sealing properties to keep out water and dirt Polymer type to improve tenacity and stay-put properties under high shear and heavy load conditions Outstanding water resistance Easily pumped through automatic grease systems STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc Data Sheet

LUBRIPLATE No. 1240 Series of grease are designed for heavy-duty and severe service applications that call for continuous protection under heavy load, moisture and other environmental extremes. LUBRIPLATE No. 1240: is ideal for heavy load, tight tolerance situations and can be pumped easily through automatic dispensing systems on construction and mining equipment as well as industrial applications. ADVANTAGES Excellent extreme pressure anti-wear protection Extremely shear-stable for longer effective periods of lubrication Prevents fretting corrosion High temperature capabilities Very good sealing properties to keep out water and dirt Polymer type to improve tenacity and stay-put properties under high shear and heavy load conditions Outstanding water resistance Easily pumped through automatic grease systems STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc Data Sheet

LUBRIPLATE No. 1240 Series of grease are designed for heavy-duty and severe service applications that call for continuous protection under heavy load, moisture and other environmental extremes. LUBRIPLATE No 1242: is an NLGI grade 2 lubricant and is an excellent multipurpose, extreme pressure grease. LUBRIPLATE No. 1242 is recommended for: Heavy-Duty Chassis Lubrication, Ball Joints, King Pins, Steering Knuckles, Bucket Loader Ball Joints, Open Gears, Racks, Cams, Slides & Ways, and whenever oscillating motion exists. ADVANTAGES Excellent extreme pressure anti-wear protection Extremely shear-stable for longer effective periods of lubrication Prevents fretting corrosion High temperature capabilities Very good sealing properties to keep out water and dirt Polymer type to improve tenacity and stay-put properties under high shear and heavy load conditions Outstanding water resistance Easily pumped through automatic grease systems STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc Data Sheet

LUBRIPLATE No. 1240 Series of grease are designed for heavy-duty and severe service applications that call for continuous protection under heavy load, moisture and other environmental extremes. LUBRIPLATE No 1242: is an NLGI grade 2 lubricant and is an excellent multipurpose, extreme pressure grease. LUBRIPLATE No. 1242 is recommended for: Heavy-Duty Chassis Lubrication, Ball Joints, King Pins, Steering Knuckles, Bucket Loader Ball Joints, Open Gears, Racks, Cams, Slides & Ways, and whenever oscillating motion exists. ADVANTAGES Excellent extreme pressure anti-wear protection Extremely shear-stable for longer effective periods of lubrication Prevents fretting corrosion High temperature capabilities Very good sealing properties to keep out water and dirt Polymer type to improve tenacity and stay-put properties under high shear and heavy load conditions Outstanding water resistance Easily pumped through automatic grease systems STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc Data Sheet

LUBRIPLATE No. 3000, No. 3001 and No. 3000-W (winter grade) are heavy-duty, multi-purpose lubricants enhanced with molybdenum disulfide and graphite for applications that demand a long-lasting, tenacious, adhesive film. Both products contain 5% molybdenum disulfide to conform with various industry specifications. This superior film provides protection against water, salt brine, rust and corrosive contaminants. LUBRIPLATE No. 3000-W is an excellent multi-purpose lubricant even under adversely cold weather conditions. ADVANTAGES Polymer adds to higher shear stability and longer lubricant life Molybdenum Disulfide extends extreme pressure/antiwear capabilities in boundary lubrication situations Graphite extends extreme pressure/anti-wear capabilities in boundary lubrication situations Adhesive – tenacious, stay-put properties keeps lubricant in place – water and contamination out Extremely water resistant APPLICATIONS LUBRIPLATE No. 3000, No. 3001 and No. 3000-W are recommended for: Heavy-Duty Chassis Lubricationv Ball Joints, King Pins, Steering Knuckles Fifth Wheels Bucket Loader Ball Joints Open Gears, Racks, Cams, Slides and Ways Underwater Applications Plus, wherever a black, moly, graphite, adhesive lubricant is required STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc. Data Sheet

LUBRIPLATE No. 3000, No. 3001 and No. 3000-W (winter grade) are heavy-duty, multi-purpose lubricants enhanced with molybdenum disulfide and graphite for applications that demand a long-lasting, tenacious, adhesive film. Both products contain 5% molybdenum disulfide to conform with various industry specifications. This superior film provides protection against water, salt brine, rust and corrosive contaminants. LUBRIPLATE No. 3000-W is an excellent multi-purpose lubricant even under adversely cold weather conditions. ADVANTAGES Polymer adds to higher shear stability and longer lubricant life Molybdenum Disulfide extends extreme pressure/antiwear capabilities in boundary lubrication situations Graphite extends extreme pressure/anti-wear capabilities in boundary lubrication situations Adhesive – tenacious, stay-put properties keeps lubricant in place – water and contamination out Extremely water resistant APPLICATIONS LUBRIPLATE No. 3000, No. 3001 and No. 3000-W are recommended for: Heavy-Duty Chassis Lubrication Ball Joints, King Pins, Steering Knuckles Fifth Wheels Bucket Loader Ball Joints Open Gears, Racks, Cams, Slides and Ways Underwater Applications Plus, wherever a black, moly, graphite, adhesive lubricant is required STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc. Data Sheet

LUBRIPLATE No. 3000, No. 3001 and No. 3000-W (winter grade) are heavy-duty, multi-purpose lubricants enhanced with molybdenum disulfide and graphite for applications that demand a long-lasting, tenacious, adhesive film. Both products contain 5% molybdenum disulfide to conform with various industry specifications. This superior film provides protection against water, salt brine, rust and corrosive contaminants. LUBRIPLATE No. 3000-W is an excellent multi-purpose lubricant even under adversely cold weather conditions. ADVANTAGES Polymer adds to higher shear stability and longer lubricant life Molybdenum Disulfide extends extreme pressure/antiwear capabilities in boundary lubrication situations Graphite extends extreme pressure/anti-wear capabilities in boundary lubrication situations Adhesive – tenacious, stay-put properties keeps lubricant in place – water and contamination out Extremely water resistant APPLICATIONS LUBRIPLATE No. 3000, No. 3001 and No. 3000-W are recommended for: Heavy-Duty Chassis Lubrication Ball Joints, King Pins, Steering Knuckles Fifth Wheels Bucket Loader Ball Joints Open Gears, Racks, Cams, Slides and Ways Underwater Applications Plus, wherever a black, moly, graphite, adhesive lubricant is required STORAGE RECOMMENDATIONS Products should be stored between 40°F-120°F Products should be stored in a dry covered environment Products should not be stored in warm, direct sunlight Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc. Data Sheet