Lubriplate

Engineered to meet the extreme requirements encountered in the food and beverage-processing industries such as water wash downs, steam, acidic conditions, etc., the LUBRIPLATE SSO-FG Series of products are formulated with premium performance additives and long-life synthetic base fluids that provide superior lubrication and outstanding oxidative, wear, rust and corrosion protection to the equipment. They also contain a dispersant which delivers the required and effective lubrication for seamer/closers in the constant presence of water and steam. They are NSF H1 registered food grade APPLICATIONS The LUBRIPLATE SSO-FG Series of products are premium, fully synthetic lubricants designed to be used in seaming/canning equipment and related applications. APPROVALS Angelus Seamers Zacmi Seamers Data Sheet NSF Food-Grade Registrations

LUBRIPLATE Synflush FG is a unique, modern technology product designed to clean systems where a switch from an H-2 lubricant to an NSF International H-1 Registered lubricant or a switch from a Mineral Oil or Polyalphaolefin based lubricant to an NSF International H-1 Registered Polyalkylene Glycol (PAG) based lubricant is required. APPLICATIONS LUBRIPLATE Synflush FG is compatible with Synthetic Polyalphaolefin, Polyolesters, Di-esters, Polyalkylene Glycols (PAG’s) as well as mineral based fluids; therefore, it may be used when switching from many types of fluids without leaving behind incompatible residue. RECOMMENDATIONS Prior to using LUBRIPLATE Synflush FG, it is highly recommended, although not necessary, that a 4-ounce sample from the unit in question be submitted so that baseline testing may be performed. These test results will help to determine the effectiveness of the flushing procedures with subsequent oil samples. Cleaning internal surfaces of gear box, air compressor, blower, hydraulic systems during normal machine operation. LUBRIPLATE Synflush FG can be added to any machine oil reservoir containing mineral oil or PAO synthetic hydrocarbon fluid 10-30% concentrations will give the existing fluid cleaning ability and gradually dissolve varnish/gum deposits. If equipped with oil filtration, filters should be monitored and changed as required. Typical cleaning time is 48 to 96 hours. There are many ways to use this product to clean all types of internal machine systems. Please contact LUBRIPLATE for assistance. Limit concentration to 10% for internally painted gear boxes. Data Sheet NSF Registration NSF Food-Grade Registrations

LUBRIPLATE SYNFLUSH is a premium quality, pure synthetic fluid designed to clean and dissolve varnish/deposits found in rotary screw and reciprocating type air compressors while the compressor is in operation. It is compatible with petroleum/mineral oils as well as all LUBRIPLATE Synthetic Compressor Fluids and most other synthetic fluids. Contact us for compatibility verification.APPLICATIONSLUBRIPLATE SYNFLUSH is also designed for flushing compressors converting from petroleum/mineral oil to synthetic fluids. The flushing procedure removes the remaining petroleum oil that is unable to be removed by draining alone as well as cleaning the compressor prior to introducing the new synthetic fluid.LUBRIPLATE SYNFLUSH can also be used to clean hydraulic systems, gearboxes and reducers, FRL’s (Airline Oilers) and close looped circulating oil systems.LUBRIPLATE SYNFLUSH is not intended for automotive/diesel applications such as cleaning fuel injectors or crankcases.ADVANTAGESRemoves varnish and carbon deposits, which greatly improves compressor efficiency and life expectancy.Compatible with petroleum base oils as well as all LUBRIPLATE Synthetic Compressor Fluids.Can be used in its pure form in all types of air compressors up to 500 hours.Contains no hazardous chemicals.Offers excellent thermal and oxidative stability.Provides excellent solubility, solvency, and cleaning capabilities.Data Sheet

LUBRIPLATE Syncool FG is a NSF/H-1 registered 100% synthetic polyglycolester (PGE) fluid targeted for high performance in rotary screw and rotary vane air compressors where high operating temperatures are present. It is formulated with state of the art additives to enhance its inherent outstanding performance characteristics. APPLICATIONS Typically, compressors with discharge air temperatures ranging from 210°F to 240°F are candidates for LUBRIPLATE Syncool FG. LUBRIPLATE Syncool FG may be recommended against major industry PGE synthetic fluids when the customer/user wants to convert to a NSF/H-1 registered food grade fluid ADVANTAGES It is biodegradable. Excellent thermal and oxidation stability characteristics increase the service life of the lubricant resulting in extended drain intervals; typically, 8,000 hours under normal conditions. Non-carbonizing which eliminates harmful deposits. High viscosity indexes, which means less change in the viscosity of the fluid over a wide temperature range. Excellent lubricity qualities, very low coefficients of friction and superior heat transfer characteristics resulting in lower operating temperatures and energy savings. Data Sheet NSF Registration NSF Food-Grade Registrations

LUBRIPLATE SYN LUBE ISO VG Fluids 22 through 100 are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. ADVANTAGES LUBRIPLATE SYN LUBE Synthetic Fluids provide several advantages over mineral oil based products. ENERGY SAVINGS SYN LUBE Synthetic Fluids exhibit high viscosity indexes, excellent lubricity, very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and lower power consumption EXTENDED DRAIN INTERVALS Excellent thermal and oxidation stability characteristics increase the service life of the lubricant many times over that of petroleum oils Provide outstanding water demulsibility allowing for any water that may have entered the system to be rapidly separated from the SYN LUBE Synthetic Fluids. The water can then be easily drained and emulsion problems can be averted Generally, intervals of 8,000 hours of compressor fluid service can be achieved, depending on operating conditions. LUBRIPLATE Division encourages the use of our Free Oil Analysis Program to determine the extended drain interval FLUID/MATERIAL COMPATIBILITY SYN LUBE Synthetic Fluids are compatible with mineral oil products avoiding time- consuming flushing procedures and allowing conversion to be simplistic. Always consult LUBRIPLATE prior to conversion if compatibility is an issue. SYN LUBE Synthetic Fluids are recommended for use with high Nitrile Buna-N, Teflon, Viton, Fluorosilicone and Polysulfide elastomers. These fluids are not recommended for use with low Nitrile Buna-N, Neoprene or natural rubber Data Sheet

LUBRIPLATE SYN LUBE ISO VG Fluids 22 through 100 are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. ADVANTAGES LUBRIPLATE SYN LUBE Synthetic Fluids provide several advantages over mineral oil based products. ENERGY SAVINGS SYN LUBE Synthetic Fluids exhibit high viscosity indexes, excellent lubricity, very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and lower power consumption EXTENDED DRAIN INTERVALS Excellent thermal and oxidation stability characteristics increase the service life of the lubricant many times over that of petroleum oils Provide outstanding water demulsibility allowing for any water that may have entered the system to be rapidly separated from the SYN LUBE Synthetic Fluids. The water can then be easily drained and emulsion problems can be averted Generally, intervals of 8,000 hours of compressor fluid service can be achieved, depending on operating conditions. LUBRIPLATE Division encourages the use of our Free Oil Analysis Program to determine the extended drain interval FLUID/MATERIAL COMPATIBILITY SYN LUBE Synthetic Fluids are compatible with mineral oil products avoiding time- consuming flushing procedures and allowing conversion to be simplistic. Always consult LUBRIPLATE prior to conversion if compatibility is an issue. SYN LUBE Synthetic Fluids are recommended for use with high Nitrile Buna-N, Teflon, Viton, Fluorosilicone and Polysulfide elastomers. These fluids are not recommended for use with low Nitrile Buna-N, Neoprene or natural rubber Data Sheet

LUBRIPLATE SYN LUBE ISO VG Fluids 22 through 100 are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. ADVANTAGES LUBRIPLATE SYN LUBE Synthetic Fluids provide several advantages over mineral oil based products. ENERGY SAVINGS SYN LUBE Synthetic Fluids exhibit high viscosity indexes, excellent lubricity, very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and lower power consumption EXTENDED DRAIN INTERVALS Excellent thermal and oxidation stability characteristics increase the service life of the lubricant many times over that of petroleum oils Provide outstanding water demulsibility allowing for any water that may have entered the system to be rapidly separated from the SYN LUBE Synthetic Fluids. The water can then be easily drained and emulsion problems can be averted Generally, intervals of 8,000 hours of compressor fluid service can be achieved, depending on operating conditions. LUBRIPLATE Division encourages the use of our Free Oil Analysis Program to determine the extended drain interval FLUID/MATERIAL COMPATIBILITY SYN LUBE Synthetic Fluids are compatible with mineral oil products avoiding time- consuming flushing procedures and allowing conversion to be simplistic. Always consult LUBRIPLATE prior to conversion if compatibility is an issue. SYN LUBE Synthetic Fluids are recommended for use with high Nitrile Buna-N, Teflon, Viton, Fluorosilicone and Polysulfide elastomers. These fluids are not recommended for use with low Nitrile Buna-N, Neoprene or natural rubber Data Sheet

LUBRIPLATE SYN LUBE ISO VG Fluids 22 through 100 are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. ADVANTAGES LUBRIPLATE SYN LUBE Synthetic Fluids provide several advantages over mineral oil based products. ENERGY SAVINGS SYN LUBE Synthetic Fluids exhibit high viscosity indexes, excellent lubricity, very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and lower power consumption EXTENDED DRAIN INTERVALS Excellent thermal and oxidation stability characteristics increase the service life of the lubricant many times over that of petroleum oils Provide outstanding water demulsibility allowing for any water that may have entered the system to be rapidly separated from the SYN LUBE Synthetic Fluids. The water can then be easily drained and emulsion problems can be averted Generally, intervals of 8,000 hours of compressor fluid service can be achieved, depending on operating conditions. LUBRIPLATE Division encourages the use of our Free Oil Analysis Program to determine the extended drain interval FLUID/MATERIAL COMPATIBILITY SYN LUBE Synthetic Fluids are compatible with mineral oil products avoiding time- consuming flushing procedures and allowing conversion to be simplistic. Always consult LUBRIPLATE prior to conversion if compatibility is an issue. SYN LUBE Synthetic Fluids are recommended for use with high Nitrile Buna-N, Teflon, Viton, Fluorosilicone and Polysulfide elastomers. These fluids are not recommended for use with low Nitrile Buna-N, Neoprene or natural rubber Data Sheet

LUBRIPLATE SYN LUBE ISO VG Fluids 22 through 100 are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. ADVANTAGES LUBRIPLATE SYN LUBE Synthetic Fluids provide several advantages over mineral oil based products. ENERGY SAVINGS SYN LUBE Synthetic Fluids exhibit high viscosity indexes, excellent lubricity, very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and lower power consumption EXTENDED DRAIN INTERVALS Excellent thermal and oxidation stability characteristics increase the service life of the lubricant many times over that of petroleum oils Provide outstanding water demulsibility allowing for any water that may have entered the system to be rapidly separated from the SYN LUBE Synthetic Fluids. The water can then be easily drained and emulsion problems can be averted Generally, intervals of 8,000 hours of compressor fluid service can be achieved, depending on operating conditions. LUBRIPLATE Division encourages the use of our Free Oil Analysis Program to determine the extended drain interval FLUID/MATERIAL COMPATIBILITY SYN LUBE Synthetic Fluids are compatible with mineral oil products avoiding time- consuming flushing procedures and allowing conversion to be simplistic. Always consult LUBRIPLATE prior to conversion if compatibility is an issue. SYN LUBE Synthetic Fluids are recommended for use with high Nitrile Buna-N, Teflon, Viton, Fluorosilicone and Polysulfide elastomers. These fluids are not recommended for use with low Nitrile Buna-N, Neoprene or natural rubber Data Sheet

LUBRIPLATE SYN LUBE ISO VG Fluids 22 through 100 are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. ADVANTAGES LUBRIPLATE SYN LUBE Synthetic Fluids provide several advantages over mineral oil based products. ENERGY SAVINGS SYN LUBE Synthetic Fluids exhibit high viscosity indexes, excellent lubricity, very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and lower power consumption EXTENDED DRAIN INTERVALS Excellent thermal and oxidation stability characteristics increase the service life of the lubricant many times over that of petroleum oils Provide outstanding water demulsibility allowing for any water that may have entered the system to be rapidly separated from the SYN LUBE Synthetic Fluids. The water can then be easily drained and emulsion problems can be averted Generally, intervals of 8,000 hours of compressor fluid service can be achieved, depending on operating conditions. LUBRIPLATE Division encourages the use of our Free Oil Analysis Program to determine the extended drain interval FLUID/MATERIAL COMPATIBILITY SYN LUBE Synthetic Fluids are compatible with mineral oil products avoiding time- consuming flushing procedures and allowing conversion to be simplistic. Always consult LUBRIPLATE prior to conversion if compatibility is an issue. SYN LUBE Synthetic Fluids are recommended for use with high Nitrile Buna-N, Teflon, Viton, Fluorosilicone and Polysulfide elastomers. These fluids are not recommended for use with low Nitrile Buna-N, Neoprene or natural rubber Data Sheet

LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are available in (6) ISO Viscosity Grades (ISO VG 150, 220, 320, 460, 680, 1000). ADVANTAGES LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids provide several advantages over mineral oil based products. ENERGY SAVINGS Excellent thermal stability and oxidation resistant characteristics increasing the service life of the lubricant many times over that of mineral oils. Outstanding anti-wear properties resulting in extended drain intervals and longer equipment life. Exceptional demulsibility characteristics. High viscosity indexes and low pour points to ensure optimum performance over a wide operating temperature range. Broad range of compatibility with elastomers and seal materials. Exhibit very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and reduced power consumption. Data Sheet

LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are available in (6) ISO Viscosity Grades (ISO VG 150, 220, 320, 460, 680, 1000). ADVANTAGES LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids provide several advantages over mineral oil based products. ENERGY SAVINGS Excellent thermal stability and oxidation resistant characteristics increasing the service life of the lubricant many times over that of mineral oils. Outstanding anti-wear properties resulting in extended drain intervals and longer equipment life. Exceptional demulsibility characteristics. High viscosity indexes and low pour points to ensure optimum performance over a wide operating temperature range. Broad range of compatibility with elastomers and seal materials. Exhibit very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and reduced power consumption. Data Sheet

LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are available in (6) ISO Viscosity Grades (ISO VG 150, 220, 320, 460, 680, 1000). ADVANTAGES LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids provide several advantages over mineral oil based products. ENERGY SAVINGS Excellent thermal stability and oxidation resistant characteristics increasing the service life of the lubricant many times over that of mineral oils. Outstanding anti-wear properties resulting in extended drain intervals and longer equipment life. Exceptional demulsibility characteristics. High viscosity indexes and low pour points to ensure optimum performance over a wide operating temperature range. Broad range of compatibility with elastomers and seal materials. Exhibit very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and reduced power consumption. Data Sheet

LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are available in (6) ISO Viscosity Grades (ISO VG 150, 220, 320, 460, 680, 1000). ADVANTAGES LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids provide several advantages over mineral oil based products. ENERGY SAVINGS Excellent thermal stability and oxidation resistant characteristics increasing the service life of the lubricant many times over that of mineral oils. Outstanding anti-wear properties resulting in extended drain intervals and longer equipment life. Exceptional demulsibility characteristics. High viscosity indexes and low pour points to ensure optimum performance over a wide operating temperature range. Broad range of compatibility with elastomers and seal materials. Exhibit very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and reduced power consumption. Data Sheet

LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology. LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids are available in (6) ISO Viscosity Grades (ISO VG 150, 220, 320, 460, 680, 1000). ADVANTAGES LUBRIPLATE SYN LUBE SERIES ISO VG 150 - 1000 fluids provide several advantages over mineral oil based products. ENERGY SAVINGS Excellent thermal stability and oxidation resistant characteristics increasing the service life of the lubricant many times over that of mineral oils. Outstanding anti-wear properties resulting in extended drain intervals and longer equipment life. Exceptional demulsibility characteristics. High viscosity indexes and low pour points to ensure optimum performance over a wide operating temperature range. Broad range of compatibility with elastomers and seal materials. Exhibit very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and reduced power consumption. Data Sheet