Lubriplate

The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade Registrations

The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade Registrations

The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEData SheetNSF Food-Grade Registrations

LUBRIPLATE SEAMER OILS FG ISO-100, ISO150, and ISO-220 are manufactured with the highest quality NSF International H-1 food grade registered/USP mineral oils. USP mineral oil is the purest, safest and most effective oil available for use in H-1/food grade lubricating fluids. These fluids are compounded with anti-wear additives and rust and oxidation inhibitors which compliment the unsurpassed lubricating ability of the USP mineral oil.APPLICATIONS & ADVANTAGESLUBRIPLATE SEAMER FG OILS are specifically designed to lubricate can seaming machines, such as Angelus Seamer Models 61H, 120L, 121L, 140S & 180S.These high-performance food grade seamer oils are recommended for can seamers with oncethrough oil systems as well as those that utilize oil re-circulating/filtration systems. Manufactured with ingredients that comply with FDA 21 CFR 178.3570.LUBRIPLATE’s Free Oil Analysis service is provided to assist in monitoring oil condition in models equipped with oil re-circulating/filtration systems.Data Sheet

LUBRIPLATE SEAMER OILS FG ISO-100, ISO150, and ISO-220 are manufactured with the highest quality NSF International H-1 food grade registered/USP mineral oils. USP mineral oil is the purest, safest and most effective oil available for use in H-1/food grade lubricating fluids. These fluids are compounded with anti-wear additives and rust and oxidation inhibitors which compliment the unsurpassed lubricating ability of the USP mineral oil.APPLICATIONSLUBRIPLATE SEAMER FG OILS are specifically designed to lubricate can seaming machines, such as Angelus Seamer Models 61H, 120L, 121L, 140S & 180S.These high-performance food grade seamer oils are recommended for can seamers with oncethrough oil systems as well as those that utilize oil re-circulating/filtration systems.Manufactured with ingredients that comply with FDA 21 CFR 178.3570.LUBRIPLATE’s Free Oil Analysis service is provided to assist in monitoring oil condition in models equipped with oil re-circulating/filtration systems.Data SheetNSF Food-Grade Registrations

LUBRIPLATE SEAMER OILS FG ISO-100, ISO150, and ISO-220 are manufactured with the highest quality NSF International H-1 food grade registered/USP mineral oils. USP mineral oil is the purest, safest and most effective oil available for use in H-1/food grade lubricating fluids. These fluids are compounded with anti-wear additives and rust and oxidation inhibitors which compliment the unsurpassed lubricating ability of the USP mineral oil.APPLICATIONSLUBRIPLATE SEAMER FG OILS are specifically designed to lubricate can seaming machines, such as Angelus Seamer Models 61H, 120L, 121L, 140S & 180S.These high-performance food grade seamer oils are recommended for can seamers with oncethrough oil systems as well as those that utilize oil re-circulating/filtration systems.Manufactured with ingredients that comply with FDA 21 CFR 178.3570.LUBRIPLATE’s Free Oil Analysis service is provided to assist in monitoring oil condition in models equipped with oil re-circulating/filtration systems.Data SheetNSF Food-Grade Registrations

The LUBRIPLATE SFGO Ultra Series of synthetic hydrocarbon food grade fluids have been formulated with 100% pure PAO and ester synthetic base oils that meet a variety of demanding applications where operating higher temperatures are required. These Polyalphaolefin (PAO) and ester blended synthetics are outstanding lubricants for use under severe conditions subject to extremely high or low temperatures. They exhibit outstanding oxidation resistanceand thermal stability capabilities. These fluids are all zinc-free.LUBRIPLATE strongly recommends the use of the LUBRIPLATE Oil Analysis Program to establish drain intervals in air compressor applications. Typical service life can be as much as 4,000 hours under normal operating conditions. Oil life can be affected by various contaminants, moisture and other factors. Therefore, oil analysis becomes critical when maximizing useful service life. Contact your authorized LUBRIPLATE Distributor for more information on the LUBRIPLATE Oil Analysis Program.APPLICATIONSThe LUBRIPLATE SFGO Ultra Series may be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings, chains and airline lubricators.ADVANTAGESExcellent thermal stability resulting in longer service life.Superior oxidation resistanceOutstanding anti-wear properties providing extended equipment life.Exceptional demulsibility characteristics.Superb corrosion inhibitor package.Naturally high viscosity index and low pour points ensure optimum performance over a wide operating temperature range.Superior cleanliness characteristics.Excellent compatibility with a variety of elastomers, seals, plastics, paint and mineral oilsData SheetNSF Food-Grade Registrations

LUBRIPLATE ZF Industrial Oils are premium Zincfree, ashless, anti-wear fluids designed to perform in the most demanding hydraulic systems and air compressors. These heavy duty, high performance oils can withstand elevated temperatures and high pressures resulting in lower maintenance costs as well as extended oil life.LUBRIPLATE ZF Industrial Oils do not contain any silicone compounds.LUBRIPLATE ZF Industrial Oils meet the following requirements:OEMSPECIFICATIONVickers (Eaton)M-2950-S & I-286-SGeneral MotorsLS-2Cincinnati MilacronP-68, P-70, P-69Bosch RexrothRE 90 220German Steel IndustrySEB 181222DIN 51524Part I & IIAFNOR NF E 48-603Part I & IIU.S. SteelNo. 126, 127, 136SAEMS 1004Husky105687LUBRIPLATE ZF Industrial Oils are non-toxic to aquatic life, exceeding U.S. EPA LC50 test requirements adopted by the U.S. Fish and Wildlife Service and the U.S. Environmental Protection Agency. These environmentally safe industrial oils are compatible with other mineral based industrial oils and are easily recyclable.Data Sheet

The LUBRIPLATE SFGO Ultra Series of synthetic hydrocarbon food grade fluids have been formulated with 100% pure PAO and ester synthetic base oils that meet a variety of demanding applications where operating higher temperatures are required. These Polyalphaolefin (PAO) and ester blended synthetics are outstanding lubricants for use under severe conditions subject to extremely high or low temperatures. They exhibit outstanding oxidation resistance and thermal stability capabilities. These fluids are all zinc-free. LUBRIPLATE strongly recommends the use of the LUBRIPLATE Oil Analysis Program to establish drain intervals in air compressor applications. Typical service life can be as much as 4,000 hours under normal operating conditions. Oil life can be affected by various contaminants, moisture and other factors. Therefore, oil analysis becomes critical when maximizing useful service life. Contact your authorized LUBRIPLATE Distributor for more information on the LUBRIPLATE Oil Analysis Program. APPLICATIONS The LUBRIPLATE SFGO Ultra Series may be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings, chains and airline lubricators. Data Sheet NSF Food-Grade Registrations

The LUBRIPLATE SFGO Ultra Series of synthetic hydrocarbon food grade fluids have been formulated with 100% pure PAO and ester synthetic base oils that meet a variety of demanding applications where operating higher temperatures are required. These Polyalphaolefin (PAO) and ester blended synthetics are outstanding lubricants for use under severe conditions subject to extremely high or low temperatures. They exhibit outstanding oxidation resistance and thermal stability capabilities. These fluids are all zinc-free. LUBRIPLATE strongly recommends the use of the LUBRIPLATE Oil Analysis Program to establish drain intervals in air compressor applications. Typical service life can be as much as 4,000 hours under normal operating conditions. Oil life can be affected by various contaminants, moisture and other factors. Therefore, oil analysis becomes critical when maximizing useful service life. APPLICATIONS The LUBRIPLATE SFGO Ultra Series may be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings, chains and airline lubricators. The LUBRIPLATE SFGO Ultra Lubricants are compatible with other LUBRIPLATE products such as LUBRIPLATE AC Oils, LUBRIPLATE HO Oils, LUBRIPLATE FMO Series and LUBRIPLATE FMO-AW Series. ADVANTAGES Excellent thermal stability resulting in longer service life. Superior oxidation resistance. Outstanding anti-wear properties providing extended equipment life. Exceptional demulsibility characteristics. Superb corrosion inhibitor package. Naturally high viscosity index and low pour points ensure optimum performance over a wide operating temperature range. Superior cleanliness characteristics. Excellent compatibility with a variety of elastomers, seals, plastics, paint and mineral oils Data Sheet NSF Food-Grade Registrations

The LUBRIPLATE SFGO Ultra Series of synthetic hydrocarbon food grade fluids have been formulated with 100% pure PAO and ester synthetic base oils that meet a variety of demanding applications where operating higher temperatures are required. These Polyalphaolefin (PAO) and ester blended synthetics are outstanding lubricants for use under severe conditions subject to extremely high or low temperatures. They exhibit outstanding oxidation resistance and thermal stability capabilities. These fluids are all zinc-free. LUBRIPLATE strongly recommends the use of the LUBRIPLATE Oil Analysis Program to establish drain intervals in air compressor applications. Typical service life can be as much as 4,000 hours under normal operating conditions. Oil life can be affected by various contaminants, moisture and other factors. Therefore, oil analysis becomes critical when maximizing useful service life. APPLICATIONS The LUBRIPLATE SFGO Ultra Series may be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings, chains and airline lubricators. The LUBRIPLATE SFGO Ultra Lubricants are compatible with other LUBRIPLATE products such as LUBRIPLATE AC Oils, LUBRIPLATE HO Oils, LUBRIPLATE FMO Series and LUBRIPLATE FMO-AW Series. ADVANTAGES Excellent thermal stability resulting in longer service life. Superior oxidation resistance. Outstanding anti-wear properties providing extended equipment life. Exceptional demulsibility characteristics. Superb corrosion inhibitor package. Naturally high viscosity index and low pour points ensure optimum performance over a wide operating temperature range. Superior cleanliness characteristics. Excellent compatibility with a variety of elastomers, seals, plastics, paint and mineral oils   Data Sheet NSF Food-Grade Registrations

The LUBRIPLATE SFGO Ultra Series of synthetic hydrocarbon food grade fluids have been formulated with 100% pure PAO and ester synthetic base oils that meet a variety of demanding applications where operating higher temperatures are required. These Polyalphaolefin (PAO) and ester blended synthetics are outstanding lubricants for use under severe conditions subject to extremely high or low temperatures. They exhibit outstanding oxidation resistance and thermal stability capabilities. These fluids are all zinc-free. LUBRIPLATE strongly recommends the use of the LUBRIPLATE Oil Analysis Program to establish drain intervals in air compressor applications. Typical service life can be as much as 4,000 hours under normal operating conditions. Oil life can be affected by various contaminants, moisture and other factors. Therefore, oil analysis becomes critical when maximizing useful service life. APPLICATIONS The LUBRIPLATE SFGO Ultra Series may be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings, chains and airline lubricators. The LUBRIPLATE SFGO Ultra Lubricants are compatible with other LUBRIPLATE products such as LUBRIPLATE AC Oils, LUBRIPLATE HO Oils, LUBRIPLATE FMO Series and LUBRIPLATE FMO-AW Series. ADVANTAGES Excellent thermal stability resulting in longer service life. Superior oxidation resistance. Outstanding anti-wear properties providing extended equipment life. Exceptional demulsibility characteristics. Superb corrosion inhibitor package. Naturally high viscosity index and low pour points ensure optimum performance over a wide operating temperature range. Superior cleanliness characteristics. Excellent compatibility with a variety of elastomers, seals, plastics, paint and mineral oils   Data Sheet NSF Food-Grade Registrations

The LUBRIPLATE SSO-FG Series of products are premium, fully synthetic lubricants designed to be used in seaming/canning equipment and related applications. Engineered to meet the extreme requirements encountered in the food-processing industry such as water wash downs, steam, acidic conditions, etc., the LUBRIPLATE SSO-FG Series of products are formulated with premium performance additives and base fluids that provide superior lubrication and outstanding oxidative, wear, rust and corrosion protection to the equipment. The LUBRIPLATE SSO-FG Series of products meet the requirements of the former USDA guidelines (1998) for H-1 use (lubricants with incidental food contact). These products are manufactured with ingredients that comply with FDA 21 CFR 178.3570, 21 CFR 172.882 and 21 CFR 182 G.R.A.S.Fluid Type: syntheticISO Grade: 220Food Grade - NSF H1: Yes

The LUBRIPLATE SFGO Ultra Series of synthetic hydrocarbon food grade fluids have been formulated with 100% pure PAO and ester synthetic base oils that meet a variety of demanding applications where operating higher temperatures are required. These Polyalphaolefin (PAO) and ester blended synthetics are outstanding lubricants for use under severe conditions subject to extremely high or low temperatures. They exhibit outstanding oxidation resistance and thermal stability capabilities. These fluids are all zinc-free. LUBRIPLATE strongly recommends the use of the LUBRIPLATE Oil Analysis Program to establish drain intervals in air compressor applications. Typical service life can be as much as 4,000 hours under normal operating conditions. Oil life can be affected by various contaminants, moisture and other factors. Therefore, oil analysis becomes critical when maximizing useful service life. APPLICATIONS The LUBRIPLATE SFGO Ultra Series may be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings, chains and airline lubricators. The LUBRIPLATE SFGO Ultra Lubricants are compatible with other LUBRIPLATE products such as LUBRIPLATE AC Oils, LUBRIPLATE HO Oils, LUBRIPLATE FMO Series and LUBRIPLATE FMO-AW Series. ADVANTAGES Excellent thermal stability resulting in longer service life. Superior oxidation resistance. Outstanding anti-wear properties providing extended equipment life. Exceptional demulsibility characteristics. Superb corrosion inhibitor package. Naturally high viscosity index and low pour points ensure optimum performance over a wide operating temperature range. Superior cleanliness characteristics. Excellent compatibility with a variety of elastomers, seals, plastics, paint and mineral oils   Data Sheet NSF Food-Grade Registrations

The LUBRIPLATE SFGO Ultra Series of synthetic hydrocarbon food grade fluids have been formulated with 100% pure PAO and ester synthetic base oils that meet a variety of demanding applications where operating higher temperatures are required. These Polyalphaolefin (PAO) and ester blended synthetics are outstanding lubricants for use under severe conditions subject to extremely high or low temperatures. They exhibit outstanding oxidation resistance and thermal stability capabilities. These fluids are all zinc-free. LUBRIPLATE strongly recommends the use of the LUBRIPLATE Oil Analysis Program to establish drain intervals in air compressor applications. Typical service life can be as much as 4,000 hours under normal operating conditions. Oil life can be affected by various contaminants, moisture and other factors. Therefore, oil analysis becomes critical when maximizing useful service life. APPLICATIONS The LUBRIPLATE SFGO Ultra Series may be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings, chains and airline lubricators. The LUBRIPLATE SFGO Ultra Lubricants are compatible with other LUBRIPLATE products such as LUBRIPLATE AC Oils, LUBRIPLATE HO Oils, LUBRIPLATE FMO Series and LUBRIPLATE FMO-AW Series. ADVANTAGES Excellent thermal stability resulting in longer service life. Superior oxidation resistance. Outstanding anti-wear properties providing extended equipment life. Exceptional demulsibility characteristics. Superb corrosion inhibitor package. Naturally high viscosity index and low pour points ensure optimum performance over a wide operating temperature range. Superior cleanliness characteristics. Excellent compatibility with a variety of elastomers, seals, plastics, paint and mineral oils   Data Sheet NSF Food-Grade Registrations