Lubriplate
Showing 856–900 of 1167 results
-
Lubriplate L0845-060 PGO 150 – Pail (5 gl)
$404.63The LUBRIPLATE PGO Series is comprised of 100% polyalkylene glycol (PAG) products which are designed to handle the most demanding operating conditions.APPLICATIONSThe LUBRIPLATE PGO Gear Oils may be recommended for helical, bevel helical, planetary and worm gear reducers.ADVANTAGESThese fluids deliver outstanding protection against micropitting, abrasion and wear. They deliver unsurpassed extreme pressure and anti-wear performance and provide outstanding thermal stability.LUBRIPLATE PGO Series are water-soluble and have a density higher than water; which if leaked or spilled into waterways will not create an oil sheen.Data Sheet -
Lubriplate L0845-062 PGO 150 – Drum (54 gal)
$4,207.79The LUBRIPLATE PGO Series is comprised of 100% polyalkylene glycol (PAG) products which are designed to handle the most demanding operating conditions.APPLICATIONSThe LUBRIPLATE PGO Gear Oils may be recommended for helical, bevel helical, planetary and worm gear reducers.ADVANTAGESThese fluids deliver outstanding protection against micropitting, abrasion and wear. They deliver unsurpassed extreme pressure and anti-wear performance and provide outstanding thermal stability.LUBRIPLATE PGO Series are water-soluble and have a density higher than water; which if leaked or spilled into waterways will not create an oil sheen.Data Sheet -
Lubriplate L0846-057 PGO 680 – Case of 4 (1 gl jugs)
$317.10The LUBRIPLATE PGO Series is comprised of 100% polyalkylene glycol (PAG) products which are designed to handle the most demanding operating conditions.APPLICATIONSThe LUBRIPLATE PGO Gear Oils may be recommended for helical, bevel helical, planetary and worm gear reducers.ADVANTAGESThese fluids deliver outstanding protection against micropitting, abrasion and wear. They deliver unsurpassed extreme pressure and anti-wear performance and provide outstanding thermal stability.LUBRIPLATE PGO Series are water-soluble and have a density higher than water; which if leaked or spilled into waterways will not create an oil sheen.Data Sheet -
Lubriplate L0846-060 PGO 680 – Pail (5 gl)
$378.17The LUBRIPLATE PGO Series is comprised of 100% polyalkylene glycol (PAG) products which are designed to handle the most demanding operating conditions.APPLICATIONSThe LUBRIPLATE PGO Gear Oils may be recommended for helical, bevel helical, planetary and worm gear reducers.ADVANTAGESThese fluids deliver outstanding protection against micropitting, abrasion and wear. They deliver unsurpassed extreme pressure and anti-wear performance and provide outstanding thermal stability.LUBRIPLATE PGO Series are water-soluble and have a density higher than water; which if leaked or spilled into waterways will not create an oil sheen.Data Sheet -
Lubriplate L0846-062 PGO 680 – Drum (54 gal)
$3,931.90The LUBRIPLATE PGO Series is comprised of 100% polyalkylene glycol (PAG) products which are designed to handle the most demanding operating conditions.APPLICATIONSThe LUBRIPLATE PGO Gear Oils may be recommended for helical, bevel helical, planetary and worm gear reducers.ADVANTAGESThese fluids deliver outstanding protection against micropitting, abrasion and wear. They deliver unsurpassed extreme pressure and anti-wear performance and provide outstanding thermal stability.LUBRIPLATE PGO Series are water-soluble and have a density higher than water; which if leaked or spilled into waterways will not create an oil sheen.Data Sheet -
Lubriplate L0847-057 Rock Drill Oil 10R – Case of 4 (1 gl jugs)
$162.76One of the most critical points of lubrication in Mining and Construction operations is the lubrication of rock drills of all kinds, both underground and aboveground, where either line oilers are used or where the reservoir is on the tool. LUBRIPLATE Rock Drill Oils have proven their value with outstanding performance for several years under some of the most extreme operating conditions, lubricating rock drills, air hammers and other pneumatic tools.APPLICATIONSLUBRIPLATE Rock Drill 30-R is an ISO 100 recommended for most applications. LUBRIPLATE Rock Drill 10-R is an ISO 46 recommended for colder or winter operations or where a light grade is needed.ADVANTAGESLUBRIPLATE Rock Drill Oils 10-R and 30-R have many outstanding features not found in conventional oils.Extreme pressure, more than 300,000 psi, as tested by Gardner-Denver Weeks Tester. This high load carrying ability increases the life of the parts inside the drill, such as rifle bars, nuts and ratchet dogs, thereby lowering drill cost per foot.It does not fog underground, thereby eliminating complaints from the miners of foggy or clouded goggles and breathing of dense oil-saturated air when working at the drill face.It has good emulsion characteristics eliminating gumming in the machines, thereby increasing the footage that can be drilled in a similar length of time.High viscosity index and good cold tests allow a more even feeding of oil to the drill, even under adverse temperature changes. Line oilers can frequently be cut back, thus saving on oil consumption without sacrificing performance.Approved by Gardner-Denver and meets or exceeds all other major manufacturers’ requirements, thus keeping all warranties in forceData Sheet -
Lubriplate L0847-060 Rock Drill Oil 10R – Pail (5 gl)
$180.25One of the most critical points of lubrication in Mining and Construction operations is the lubrication of rock drills of all kinds, both underground and aboveground, where either line oilers are used or where the reservoir is on the tool. LUBRIPLATE Rock Drill Oils have proven their value with outstanding performance for several years under some of the most extreme operating conditions, lubricating rock drills, air hammers and other pneumatic tools.APPLICATIONSLUBRIPLATE Rock Drill 30-R is an ISO 100 recommended for most applications. LUBRIPLATE Rock Drill 10-R is an ISO 46 recommended for colder or winter operations or where a light grade is needed.ADVANTAGESLUBRIPLATE Rock Drill Oils 10-R and 30-R have many outstanding features not found in conventional oils.Extreme pressure, more than 300,000 psi, as tested by Gardner-Denver Weeks Tester. This high load carrying ability increases the life of the parts inside the drill, such as rifle bars, nuts and ratchet dogs, thereby lowering drill cost per foot.It does not fog underground, thereby eliminating complaints from the miners of foggy or clouded goggles and breathing of dense oil-saturated air when working at the drill face.It has good emulsion characteristics eliminating gumming in the machines, thereby increasing the footage that can be drilled in a similar length of time.High viscosity index and good cold tests allow a more even feeding of oil to the drill, even under adverse temperature changes. Line oilers can frequently be cut back, thus saving on oil consumption without sacrificing performance.Approved by Gardner-Denver and meets or exceeds all other major manufacturers’ requirements, thus keeping all warranties in forceData Sheet -
Lubriplate L0847-062 Rock Drill Oil 10R – Drum (55 gal)
$1,811.81One of the most critical points of lubrication in Mining and Construction operations is the lubrication of rock drills of all kinds, both underground and aboveground, where either line oilers are used or where the reservoir is on the tool. LUBRIPLATE Rock Drill Oils have proven their value with outstanding performance for several years under some of the most extreme operating conditions, lubricating rock drills, air hammers and other pneumatic tools.APPLICATIONSLUBRIPLATE Rock Drill 30-R is an ISO 100 recommended for most applications. LUBRIPLATE Rock Drill 10-R is an ISO 46 recommended for colder or winter operations or where a light grade is needed.ADVANTAGESLUBRIPLATE Rock Drill Oils 10-R and 30-R have many outstanding features not found in conventional oils.Extreme pressure, more than 300,000 psi, as tested by Gardner-Denver Weeks Tester. This high load carrying ability increases the life of the parts inside the drill, such as rifle bars, nuts and ratchet dogs, thereby lowering drill cost per foot.It does not fog underground, thereby eliminating complaints from the miners of foggy or clouded goggles and breathing of dense oil-saturated air when working at the drill face.It has good emulsion characteristics eliminating gumming in the machines, thereby increasing the footage that can be drilled in a similar length of time.High viscosity index and good cold tests allow a more even feeding of oil to the drill, even under adverse temperature changes. Line oilers can frequently be cut back, thus saving on oil consumption without sacrificing performance.Approved by Gardner-Denver and meets or exceeds all other major manufacturers’ requirements, thus keeping all warranties in forceData Sheet -
Lubriplate L0848-057 Rock Drill Oil 10R – Case of 4 (1 gl jugs)
$162.76One of the most critical points of lubrication in Mining and Construction operations is the lubrication of rock drills of all kinds, both underground and aboveground, where either line oilers are used or where the reservoir is on the tool. LUBRIPLATE Rock Drill Oils have proven their value with outstanding performance for several years under some of the most extreme operating conditions, lubricating rock drills, air hammers and other pneumatic tools.APPLICATIONSLUBRIPLATE Rock Drill 30-R is an ISO 100 recommended for most applications. LUBRIPLATE Rock Drill 10-R is an ISO 46 recommended for colder or winter operations or where a light grade is needed.ADVANTAGESLUBRIPLATE Rock Drill Oils 10-R and 30-R have many outstanding features not found in conventional oils.Extreme pressure, more than 300,000 psi, as tested by Gardner-Denver Weeks Tester. This high load carrying ability increases the life of the parts inside the drill, such as rifle bars, nuts and ratchet dogs, thereby lowering drill cost per foot.It does not fog underground, thereby eliminating complaints from the miners of foggy or clouded goggles and breathing of dense oil-saturated air when working at the drill face.It has good emulsion characteristics eliminating gumming in the machines, thereby increasing the footage that can be drilled in a similar length of time.High viscosity index and good cold tests allow a more even feeding of oil to the drill, even under adverse temperature changes. Line oilers can frequently be cut back, thus saving on oil consumption without sacrificing performance.Approved by Gardner-Denver and meets or exceeds all other major manufacturers’ requirements, thus keeping all warranties in forceData Sheet -
Lubriplate L0848-060 Rock Drill Oil 10R – Pail (5 gl)
$180.25One of the most critical points of lubrication in Mining and Construction operations is the lubrication of rock drills of all kinds, both underground and aboveground, where either line oilers are used or where the reservoir is on the tool. LUBRIPLATE Rock Drill Oils have proven their value with outstanding performance for several years under some of the most extreme operating conditions, lubricating rock drills, air hammers and other pneumatic tools.APPLICATIONSLUBRIPLATE Rock Drill 30-R is an ISO 100 recommended for most applications. LUBRIPLATE Rock Drill 10-R is an ISO 46 recommended for colder or winter operations or where a light grade is needed.ADVANTAGESLUBRIPLATE Rock Drill Oils 10-R and 30-R have many outstanding features not found in conventional oils.Extreme pressure, more than 300,000 psi, as tested by Gardner-Denver Weeks Tester. This high load carrying ability increases the life of the parts inside the drill, such as rifle bars, nuts and ratchet dogs, thereby lowering drill cost per foot.It does not fog underground, thereby eliminating complaints from the miners of foggy or clouded goggles and breathing of dense oil-saturated air when working at the drill face.It has good emulsion characteristics eliminating gumming in the machines, thereby increasing the footage that can be drilled in a similar length of time.High viscosity index and good cold tests allow a more even feeding of oil to the drill, even under adverse temperature changes. Line oilers can frequently be cut back, thus saving on oil consumption without sacrificing performance.Approved by Gardner-Denver and meets or exceeds all other major manufacturers’ requirements, thus keeping all warranties in forceData Sheet -
Lubriplate L0848-062 Rock Drill Oil 10R – Drum (55 gal)
$1,811.81One of the most critical points of lubrication in Mining and Construction operations is the lubrication of rock drills of all kinds, both underground and aboveground, where either line oilers are used or where the reservoir is on the tool. LUBRIPLATE Rock Drill Oils have proven their value with outstanding performance for several years under some of the most extreme operating conditions, lubricating rock drills, air hammers and other pneumatic tools.APPLICATIONSLUBRIPLATE Rock Drill 30-R is an ISO 100 recommended for most applications. LUBRIPLATE Rock Drill 10-R is an ISO 46 recommended for colder or winter operations or where a light grade is needed.ADVANTAGESLUBRIPLATE Rock Drill Oils 10-R and 30-R have many outstanding features not found in conventional oils.Extreme pressure, more than 300,000 psi, as tested by Gardner-Denver Weeks Tester. This high load carrying ability increases the life of the parts inside the drill, such as rifle bars, nuts and ratchet dogs, thereby lowering drill cost per foot.It does not fog underground, thereby eliminating complaints from the miners of foggy or clouded goggles and breathing of dense oil-saturated air when working at the drill face.It has good emulsion characteristics eliminating gumming in the machines, thereby increasing the footage that can be drilled in a similar length of time.High viscosity index and good cold tests allow a more even feeding of oil to the drill, even under adverse temperature changes. Line oilers can frequently be cut back, thus saving on oil consumption without sacrificing performance.Approved by Gardner-Denver and meets or exceeds all other major manufacturers’ requirements, thus keeping all warranties in forceData Sheet -
Lubriplate L0853-062 PDO Light – Drum (55 gal)
$1,344.20Lubriplate L0853-062 Rock Drill Oil 10R - Drum (54 gal) -
Lubriplate L0857-057 Super Chain Oil – Case of 4 (1 gl jugs)
$202.64LUBRIPLATE Super Chain Oil is a high viscosity, tenacious type, high flash oil containing micro-fine graphite to provide smokeless lubrication of oven chains and other heavy-duty chain operations throughout a wide temperature operating range.Contains micro-fine graphiteAPPLICATIONSLUBRIPLATE Super Chain Oil is recommended for bakery ovens, drying ovens and other type ovens where the temperature does not exceed 450°F. It is also recommended for all other types of heavyduty chain operations such as floor chain conveyors, assembly lines, warehouse distribution lines, car washes and similar operations. LUBRIPLATE Super Chain Oil can be fed through automatic lubricators that can handle a SAE 140 grade lubricant. It can be brushed on, swabbed and drip fed.ADVANTAGESThe high flash point of 550°F (288°C) and the fact that it does not smoke at elevated temperatures, makes it ideal as an oven chain lubricant.Data Sheet -
Lubriplate L0857-060 Super Chain Oil – Pail (5 gl)
$230.62LUBRIPLATE Super Chain Oil is a high viscosity, tenacious type, high flash oil containing micro-fine graphite to provide smokeless lubrication of oven chains and other heavy-duty chain operations throughout a wide temperature operating range.Contains micro-fine graphiteAPPLICATIONSLUBRIPLATE Super Chain Oil is recommended for bakery ovens, drying ovens and other type ovens where the temperature does not exceed 450°F. It is also recommended for all other types of heavyduty chain operations such as floor chain conveyors, assembly lines, warehouse distribution lines, car washes and similar operations. LUBRIPLATE Super Chain Oil can be fed through automatic lubricators that can handle a SAE 140 grade lubricant. It can be brushed on, swabbed and drip fed.ADVANTAGESThe high flash point of 550°F (288°C) and the fact that it does not smoke at elevated temperatures, makes it ideal as an oven chain lubricant.Data Sheet -
Lubriplate L0857-061 Super Chain Oil – 1/4 Drum (16 gal)
$712.19LUBRIPLATE Super Chain Oil is a high viscosity, tenacious type, high flash oil containing micro-fine graphite to provide smokeless lubrication of oven chains and other heavy-duty chain operations throughout a wide temperature operating range.Contains micro-fine graphiteAPPLICATIONSLUBRIPLATE Super Chain Oil is recommended for bakery ovens, drying ovens and other type ovens where the temperature does not exceed 450°F. It is also recommended for all other types of heavyduty chain operations such as floor chain conveyors, assembly lines, warehouse distribution lines, car washes and similar operations. LUBRIPLATE Super Chain Oil can be fed through automatic lubricators that can handle a SAE 140 grade lubricant. It can be brushed on, swabbed and drip fed.ADVANTAGESThe high flash point of 550°F (288°C) and the fact that it does not smoke at elevated temperatures, makes it ideal as an oven chain lubricant.Data Sheet -
Lubriplate L0857-062 Super Chain Oil – Drum (55 gal)
$2,366.65LUBRIPLATE Super Chain Oil is a high viscosity, tenacious type, high flash oil containing micro-fine graphite to provide smokeless lubrication of oven chains and other heavy-duty chain operations throughout a wide temperature operating range. Contains micro-fine graphite APPLICATIONS LUBRIPLATE Super Chain Oil is recommended for bakery ovens, drying ovens and other type ovens where the temperature does not exceed 450°F. It is also recommended for all other types of heavyduty chain operations such as floor chain conveyors, assembly lines, warehouse distribution lines, car washes and similar operations. LUBRIPLATE Super Chain Oil can be fed through automatic lubricators that can handle a SAE 140 grade lubricant. It can be brushed on, swabbed and drip fed. ADVANTAGES The high flash point of 550°F (288°C) and the fact that it does not smoke at elevated temperatures, makes it ideal as an oven chain lubricant. Data Sheet -
Lubriplate L0863-060 STO-FG – Pail (5 gl)
$254.15LUBRIPLATE STO-FG is a special, compounded oil recommended for the lubrication of stirrups on bottle filling machines.APPLICATIONSStirrups – Bottle FillersADVANTAGESLUBRIPLATE STO-FG has excellent emulsifying properties to provide a lubricating film on the metal surfaces even in the presence of excessive moisture. LUBRIPLATE STO-FG is also compounded with dispersant type additives to keep the metal surfaces from building up with undesirable residues. This anti-wear oil is designed for areas of “incidental contact” requiring an NSF International H-1 registered product.Data SheetNSF Food-Grade Registrations -
Lubriplate L0863-062 STO-FG – Drum (55 gal)
$2,642.64LUBRIPLATE STO-FG is a special, compounded oil recommended for the lubrication of stirrups on bottle filling machines.APPLICATIONSStirrups – Bottle FillersADVANTAGESLUBRIPLATE STO-FG has excellent emulsifying properties to provide a lubricating film on the metal surfaces even in the presence of excessive moisture. LUBRIPLATE STO-FG is also compounded with dispersant type additives to keep the metal surfaces from building up with undesirable residues. This anti-wear oil is designed for areas of “incidental contact” requiring an NSF International H-1 registered product.Data SheetNSF Food-Grade Registrations -
Lubriplate L0867-054 Dexron III/Mercon ATF – Case of 12 (1 plastic qts)
$122.62LUBRIPLATE Dexron III/Mercon is a premium fluid formulated to reduce wear, protect against corrosion and last longer in vehicles with automatic and powershift transmissions.ADVANTAGESSuperior Wear PreventionExtensive Oxidation StabilityAll Season ProtectionRust and Corrosion ResistantFoam ResistantExcellent Compatibility with Seals & Metal ComponentsControlled Frictional PropertiesThermal StabilityAPPLICATIONSDexron III is a General Motors trademark for qualified automatic transmission fluids. Mercon covers all automatic transmissions for Ford model year 1988 and after. LUBRIPLATE Dexron III/Mercon is designated as make-up and/or refill fluids to meet respective car warranties.RECOMMENDATIONSLUBRIPLATE Dexron III/Mercon is also recommended for:DEXRON/MERCON transmission fluid specificationsAllison transmission fluid specificationsAs well as Chrysler and American Motors cars, vans and light trucks plus those imported vehicles specifying Dexron II. This fluid can be used as a hydraulic fluid where specified by such manufacturers as Vickers and Sundstrand.Data Sheet -
Lubriplate L0867-060 Dexron III/Mercon ATF – Pail (5 gl)
$204.88LUBRIPLATE Dexron III/Mercon is a premium fluid formulated to reduce wear, protect against corrosion and last longer in vehicles with automatic and powershift transmissions.ADVANTAGESSuperior Wear PreventionExtensive Oxidation StabilityAll Season ProtectionRust and Corrosion ResistantFoam ResistantExcellent Compatibility with Seals & Metal ComponentsControlled Frictional PropertiesThermal StabilityAPPLICATIONSDexron III is a General Motors trademark for qualified automatic transmission fluids. Mercon covers all automatic transmissions for Ford model year 1988 and after. LUBRIPLATE Dexron III/Mercon is designated as make-up and/or refill fluids to meet respective car warranties.RECOMMENDATIONSLUBRIPLATE Dexron III/Mercon is also recommended for:DEXRON/MERCON transmission fluid specificationsAllison transmission fluid specificationsAs well as Chrysler and American Motors cars, vans and light trucks plus those imported vehicles specifying Dexron II. This fluid can be used as a hydraulic fluid where specified by such manufacturers as Vickers and Sundstrand.Data Sheet -
Lubriplate L0867-062 Dexron III/Mercon ATF – Drum (55 gal)
$2,089.23LUBRIPLATE Dexron III/Mercon is a premium fluid formulated to reduce wear, protect against corrosion and last longer in vehicles with automatic and powershift transmissions.ADVANTAGESSuperior Wear PreventionExtensive Oxidation StabilityAll Season ProtectionRust and Corrosion ResistantFoam ResistantExcellent Compatibility with Seals & Metal ComponentsControlled Frictional PropertiesThermal StabilityAPPLICATIONSDexron III is a General Motors trademark for qualified automatic transmission fluids. Mercon covers all automatic transmissions for Ford model year 1988 and after. LUBRIPLATE Dexron III/Mercon is designated as make-up and/or refill fluids to meet respective car warranties.RECOMMENDATIONSLUBRIPLATE Dexron III/Mercon is also recommended for:DEXRON/MERCON transmission fluid specificationsAllison transmission fluid specificationsAs well as Chrysler and American Motors cars, vans and light trucks plus those imported vehicles specifying Dexron II. This fluid can be used as a hydraulic fluid where specified by such manufacturers as Vickers and Sundstrand.Data Sheet -
Lubriplate L0873-060 UTF Oil – Pail (5 gl)
$194.61LUBRIPLATE UTF is a high quality, specially designed lubricant containing anti-rust, anti-foam and oxidation inhibitors; plus, other additives necessary for the wide range of applications recommended by various tractor manufacturers. The product is an “all-seasonal” type of oil that resists thickening in cold weather and thinning in the heat of the summer. It is compounded with detergents to keep transmissions clean and maintain hydraulic control circuits in perfect working condition; and provides excellent protection against seal and pump deterioration.RECOMMENDATIONSLUBRIPLATE UTF is recommended for use in equipment made by:Allison C-4API GL-4Case New Holland MAT 3505, MAT 3525, MAT 3526Caterpillar TO-2 (obsolete)Danfoss HydroStatic Trans FluidFord New Holland ESN M2C868BInternational Harvester HyTran Fluid, HyTran Plus, HyTran Ultra, B-6JCMAS HK P-041, P-042JI Case MS-1204 through MS-1206, MS-1210John Deere J-20CKubota UDT FluidMassey-Ferguson CMS M1145, M1143, M1141, M1138, M1135, Permatran IIISauer SunstrandSperry Vickers/Eaton I-286S, M2950SSteiger Hydraulic Trans Fluid, Gear, Hydraulic and Wet Brake OilVolvo VCE 1273.03, WB101White Q-1826 UTHFADVANTAGESExcellent gear, bearing and pump wear protectionMulti-functional fluidOxidation and thermal stability for long lifeExcellent rust and corrosion protectionReduces brake chatterCompatibility with oil seal materials used in transmission and hydraulic systemsAPPLICATIONSOperators, especially farmers, will appreciate the multipurpose application for transmissions, final drives, and hydraulic systems of tractors thereby eliminating the need for additional oil products.Data Sheet -
Lubriplate L0873-062 UTF Oil – Drum (55 gal)
$1,989.13LUBRIPLATE UTF is a high quality, specially designed lubricant containing anti-rust, anti-foam and oxidation inhibitors; plus, other additives necessary for the wide range of applications recommended by various tractor manufacturers. The product is an “all-seasonal” type of oil that resists thickening in cold weather and thinning in the heat of the summer. It is compounded with detergents to keep transmissions clean and maintain hydraulic control circuits in perfect working condition; and provides excellent protection against seal and pump deterioration.RECOMMENDATIONSLUBRIPLATE UTF is recommended for use in equipment made by:Allison C-4API GL-4Case New Holland MAT 3505, MAT 3525, MAT 3526Caterpillar TO-2 (obsolete)Danfoss HydroStatic Trans FluidFord New Holland ESN M2C868BInternational Harvester HyTran Fluid, HyTran Plus, HyTran Ultra, B-6JCMAS HK P-041, P-042JI Case MS-1204 through MS-1206, MS-1210John Deere J-20CKubota UDT FluidMassey-Ferguson CMS M1145, M1143, M1141, M1138, M1135, Permatran IIISauer SunstrandSperry Vickers/Eaton I-286S, M2950SSteiger Hydraulic Trans Fluid, Gear, Hydraulic and Wet Brake OilVolvo VCE 1273.03, WB101White Q-1826 UTHFADVANTAGESExcellent gear, bearing and pump wear protectionMulti-functional fluidOxidation and thermal stability for long lifeExcellent rust and corrosion protectionReduces brake chatterCompatibility with oil seal materials used in transmission and hydraulic systemsAPPLICATIONSOperators, especially farmers, will appreciate the multipurpose application for transmissions, final drives, and hydraulic systems of tractors thereby eliminating the need for additional oil products.Data Sheet -
Lubriplate L0879-054 FMO-150-AW – Case of 12 (1 plastic qts)
$173.47The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Approval -
Lubriplate L0879-057 FMO-150-AW – Case of 4 (1 gl jugs)
$208.78The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Approval -
Lubriplate L0879-060 FMO-150-AW – Pail (5 gl)
$241.22The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Approval -
Lubriplate L0879-061 FMO-150-AW – 1/4 Drum (16 gal)
$750.05The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Approval -
Lubriplate L0879-062 FMO-150-AW – Drum (55 gal)
$2,498.93The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Approval -
Lubriplate L0880-054 FMO-85-AW – Case of 12 (1 plastic qts)
$158.34The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Approval -
Lubriplate L0880-057 FMO-85-AW – Case of 4 (1 gl jugs)
$187.98The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Approval -
Lubriplate L0880-060 FMO-85-AW – Pail (5 gl)
$214.11The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Approval -
Lubriplate L0880-061 FMO-85-AW – 1/4 Drum (16 gal)
$663.31The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Approval -
Lubriplate L0880-062 FMO-85-AW – Drum (55 gal)
$2,215.79The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Approval -
Lubriplate L0880-067 FMO-85-AW – Case of 12 (pump spray)
$237.74The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Approval -
Lubriplate L0881-057 FMO-200-AW – Case of 4 (1 gl jugs)
$208.78The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade Registrations -
Lubriplate L0881-060 FMO-200-AW – Pail (5 gl)
$241.22The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade Registrations -
Lubriplate L0881-061 FMO-200-AW – 1/4 Drum (16 gal)
$750.05The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade Registrations -
Lubriplate L0881-062 FMO-200-AW – Drum (55 gal)
$2,498.93The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade Registrations -
Lubriplate L0882-057 FMO-350-AW – Case of 4 (1 gl jugs)
$208.78The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade RegistrationsNSF Approval (Aerosol) -
Lubriplate L0882-060 FMO-350-AW – Pail (5 gl)
$241.22The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade RegistrationsNSF Approval (Aerosol) -
Lubriplate L0882-061 FMO-350-AW – 1/4 Drum (16 gal)
$750.05The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade RegistrationsNSF Approval (Aerosol) -
Lubriplate L0882-062 FMO-350-AW – Drum (55 gal)
$2,498.93The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade RegistrationsNSF Approval (Aerosol) -
Lubriplate L0882-063 FMO-350-AW – Case of 12 (12 oz spray)
$229.16The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade RegistrationsNSF Approval (Aerosol) -
Lubriplate L0883-057 FMO-500-AW – Case of 4 (1 gl jugs)
$228.02The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade Registrations -
Lubriplate L0883-060 FMO-500-AW – Pail (5 gl)
$265.33The LUBRIPLATE FMO-AW Series of Lubricants was developed to meet the ever-increasing demands of pressure, speed and temperature that are placed on modern food machinery. These premium food machinery lubricants are formulated with non-toxic, USP white mineral oils and are fortified with anti-oxidants, corrosion inhibitors, anti-wear agents and foam suppressants. The NSF International has registered them as H-1 lubricants, covering incidental contact with food. As such, they are acceptable as lubricants and anti-rust films on equipment and machine parts used in locations where there is exposure to edible products. These oils are all zinc-free.APPLICATIONSHydraulicsChainsGearboxesAir Line LubricatorsGeneral OilingADVANTAGESFortified with maximum strength antioxidant and are thermally and oxidatively stable.Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLEAPPROVALSLUBRIPLATE FMO-2400-AW & FMO-1100-AW have been tested and have passed the:12 Stage Four Square Gear (FZG) Test.LUBRIPLATE FMO-350-AW has passed the following hydraulic pump tests:Vickers 35VQ25 Vane Pump TestVickers V-104C Vane Pump TestRacine Model “S” Variable Volume Vane Pump TestAnd meet the following specifications:Vickers M-2950-SVickers I-286-SLUBRIPLATE FMO-200-AW has also been tested against and passed:Racine Model “S” Variable Volume Vane Pump TestData SheetNSF Food-Grade Registrations