Detcon

What is the Teledyne Detcon 9H7-303091-100M?The Teledyne Detcon 9H7-303091-100M is: DM-700 Desert Climate electrochemical 0-100 ppm H2S sensor assembly with HART Integration Module (HART protocol 7.0), aluminum junction box. The Teledyne Detcon Model 700 Series is a family of non-intrusive smart gas detection sensor modules built for harsh and extreme locations. The family covers the DM-700 electrochemical toxic gas and oxygen sensors, the TP-700 solid state MOS hydrogen sulfide sensor, the FP-700 catalytic combustible gas sensor, and the IR-700 infrared sensor for CO2 and combustible hydrocarbons. Every module uses an electropolished 316 stainless steel housing with fully encapsulated electronics, dual layer surge protection, and a plug-in field-replaceable sensor element, and is operated non-intrusively with a handheld magnet via a built-in alphanumeric LED display. Standard dual outputs are a linear 4-20 mA analog signal and Modbus RS-485, with HART, Remote Alarm Module, and SmartWireless integration options. The Model 700 Series group in the Detcon price book lists 16 orderable part numbers; this is the aluminum variant and calibrated for the 0-100 ppm range.Key specificationsSensor technologies: 3-electrode electrochemical (DM-700), solid state metal oxide semiconductor (TP-700), matched-pair catalytic bead (FP-700), infrared (IR-700)Outputs: linear 4-20 mA DC plus Modbus RS-485 RTU standard; HART module (9H7), Remote Alarm Module with 2 alarm relays plus fault (9R7), and combined HART/RAM (9K7) integration optionsCertifications (DM-700): cCSAus explosion proof Class I, Division 1, Groups B, C, D; ATEX II 2 G Ex d ib IIB+H2 T4 Gb; CE; SIL2 certified to IEC 61508Enclosure: intrinsically safe electropolished 316 stainless steel sensor housing, 100 percent epoxy encapsulated circuitry, NEMA 4X / IP66; aluminum or 316 SS junction box optionsBuilt-in scrolling alphanumeric LED display with full-text menu prompts and non-intrusive magnetic programmingPlug-in intelligent sensor cells with automatic recognition of gas type and range and oversized gold-plated connectionsPower input 11-30 VDC; normal consumption under 0.75 W (DM-700)Desert Climate (DC) H2S electrochemical variants third-party tested to ISA 92.00.01-2010Where is it used?Typical service: Oil and gas facilities; Chemical plants and refineries; Pulp and paper mills; Wastewater treatment plants and utilities.How do I order or get a quote?PE Energy supplies the Teledyne Detcon 9H7-303091-100M on a quote basis: submit a request with your part number and application details and our team returns pricing and lead time. Detcon fixed gas detection is quoted rather than sold at list price because most items ship configured for gas type, range, and area classification. This part belongs to the same product line as the FP-700 / DM-700 / TP-700 detectors we carry.

What is the Teledyne Detcon 9K7-303094-100M?The Teledyne Detcon 9K7-303094-100M is: DM-700 Desert Climate electrochemical 0-100 ppm H2S sensor assembly with combination HART / Remote Alarm Module, 316 stainless steel junction box. The Teledyne Detcon Model 700 Series is a family of non-intrusive smart gas detection sensor modules built for harsh and extreme locations. The family covers the DM-700 electrochemical toxic gas and oxygen sensors, the TP-700 solid state MOS hydrogen sulfide sensor, the FP-700 catalytic combustible gas sensor, and the IR-700 infrared sensor for CO2 and combustible hydrocarbons. Every module uses an electropolished 316 stainless steel housing with fully encapsulated electronics, dual layer surge protection, and a plug-in field-replaceable sensor element, and is operated non-intrusively with a handheld magnet via a built-in alphanumeric LED display. Standard dual outputs are a linear 4-20 mA analog signal and Modbus RS-485, with HART, Remote Alarm Module, and SmartWireless integration options. The Model 700 Series group in the Detcon price book lists 16 orderable part numbers; this is the 316 stainless steel variant and calibrated for the 0-100 ppm range.Key specificationsSensor technologies: 3-electrode electrochemical (DM-700), solid state metal oxide semiconductor (TP-700), matched-pair catalytic bead (FP-700), infrared (IR-700)Outputs: linear 4-20 mA DC plus Modbus RS-485 RTU standard; HART module (9H7), Remote Alarm Module with 2 alarm relays plus fault (9R7), and combined HART/RAM (9K7) integration optionsCertifications (DM-700): cCSAus explosion proof Class I, Division 1, Groups B, C, D; ATEX II 2 G Ex d ib IIB+H2 T4 Gb; CE; SIL2 certified to IEC 61508Enclosure: intrinsically safe electropolished 316 stainless steel sensor housing, 100 percent epoxy encapsulated circuitry, NEMA 4X / IP66; aluminum or 316 SS junction box optionsBuilt-in scrolling alphanumeric LED display with full-text menu prompts and non-intrusive magnetic programmingPlug-in intelligent sensor cells with automatic recognition of gas type and range and oversized gold-plated connectionsPower input 11-30 VDC; normal consumption under 0.75 W (DM-700)Desert Climate (DC) H2S electrochemical variants third-party tested to ISA 92.00.01-2010Where is it used?Typical service: Oil and gas facilities; Chemical plants and refineries; Pulp and paper mills; Wastewater treatment plants and utilities.How do I order or get a quote?PE Energy supplies the Teledyne Detcon 9K7-303094-100M on a quote basis: submit a request with your part number and application details and our team returns pricing and lead time. Detcon fixed gas detection is quoted rather than sold at list price because most items ship configured for gas type, range, and area classification. This part belongs to the same product line as the FP-700 / DM-700 / TP-700 detectors we carry.

Model 700 Series Sensors are a non-intrusive “Smart” sensors designed to detect and monitor oxygen and Toxic Gases in air using electrochemical sensor technology. The intelligent plug-in, field replaceable cell provides automatic recognition of gas type and range, and features over-sized gold-plated connections that help prevent corrosion. The Model 700’s rugged framework includes an intrinsically safe electro-polished 316 stainless steel housing with fully encapsulated electronics and dual layer surge protection. This innovative design virtually eliminates sensor failure due to water ingress, corrosion, vibration, and transient spikes. A primary feature of the Model 700 is embedded intuitive software that simplifies operator interface by guiding the user through routine calibration, configuration, and fault diagnostic functions using a built-in alpha/numeric display. The Model 700 is equipped with standard analog 4-20mA, and Modbus™ RS-485 outputs. Among its unique features is a wireless option that can be used with Detcon’s SmartWireless® product line. Additional integration options include a Remote Alarm Module (RAM) and HART. Detcon’s toxic gas and oxygen sensors have a long shelf life and are supported by an industry-leading warranty FEATURES: Failsafe User-Friendly Interface LED Display (With Antiglare Cover) Full Text Display Method Non-intrusive Interface Auto Zero/Auto Span Pre-emptive Fault Diagnostics Environmentally Bulletproof Electropolished 316SS Construction 100% Epoxy Encapsulated Circuitry Bulletproof I/O Protection Water-proof, Corrosion-Proof, Vibration-Proof Modular and Serviceable Modular Design Plug and Play Components Quick Thread Release Sensor Endcap (Allen Wrench only required) Integral Calibration Port APPLICATIONS: Oil & Gas Chemical Plants Food & Beverage Steel Mills Pulp and Paper Refineries Wastewater Treatment Plants Utilities PART NUMBER GAS MEASURING ACCURACY RESPONSE TIME 967-12EG91-100 Acetylene 0-100 ppm ±2% FS T90≤140 seconds 967-505091-100 Ammonia 0-100 ppm ±2% FS T90≤90 seconds 967-191991-001 Arsine 0-1 ppm ±2% FS T90≤60 seconds 967-747591-005 Bromine 0-5 ppm ±2% FS T90≤60 seconds 967-12EB91-100 Butadiene 0-100 ppm ±2% FS T90≤140 seconds 967-444491-100 Carbon Monoxide 0-100 ppm ±2% FS T50≤10 sec./ T90≤30 sec. 967-747491-010 Chlorine 0-10 ppm ±2% FS T90≤60 seconds 967-747691-050 Chlorine Dioxide 700 0-50 ppm ±2% FS T90≤120 seconds 967-777791-001 Chlorine Dioxide 701 0-1 ppm ±2% FS T90≤60 seconds 967-192191-005 Diborane 0-5 ppm ±2% FS T90≤60 seconds 967-12EO91-100 Ethanol 0-100 ppm ±2% FS T90≤140 seconds 967-12ED91-100 Ethylene (*See Note 2) 0-100 ppm ±2% FS T90≤140 seconds 967-12EJ91-100 Ethylene Oxide 0-100 ppm ±2% FS T90≤140 seconds 967-272791-001 Fluorine 0-1 ppm ±2% FS T90≤80 seconds 967-12EP91-100 Formaldehyde 0-100 ppm ±2% FS T90≤140 seconds 967-232591-002 Germane 0-2 ppm ±2% FS T90≤60 seconds 967-070791-01P Hydrogen (1%) 0-1% volume ±2% FS T90≤60 seconds 967-050591-04P Hydrogen (4%) 0-4% ±2% FS T90≤60 seconds 967-848491-100 Hydrogen PPM 0-100 ppm ±2% FS T90≤30 seconds 967-090891-030 Hydrogen Bromide 0-30 ppm ±2% FS T90≤70 seconds 967-090991-030 Hydrogen Chloride 0-30 ppm ±2% FS T90≤70 seconds 967-131391-030 Hydrogen Cyanide 0-30 ppm ±2% FS T90≤40 seconds 967-333391-010 Hydrogen Fluoride 0-10 ppm ±2% FS T90≤90 seconds 967-242491-100 Hydrogen Sulfide 0-100 ppm ±2% FS T50≤10 sec./ T80≤30 sec. 967-303091-100 Hydrogen Sulfide (DC)* 0-100 ppm ±10% applied gas concentration or ±3 ppm, whichever is greater T20 ≤ 20sec 967-303091-050 T50 ≤ 45 sec  967-303091-025 T90 ≤ 60 sec 967-12EE91-100 Methanol 0-100 ppm ±2% FS T90≤140 seconds 967-12EK91-100 Methyl Mercaptan 0-100 ppm ±2% FS T90≤45 seconds 967-949491-100 Nitric Oxide 0-100 ppm ±2% FS T90≤10 seconds 967-646491-010 Nitrogen Dioxide 0-10 ppm ±2% FS T90≤40 seconds 967-341520-025 Oxygen 0-25% volume ±1% FS T90≤10 seconds 967-393991-001 Ozone 0-1 ppm ±2% FS T90≤120 seconds 967-192091-005 Phosphine 0-5 ppm ±2% FS T90≤30 seconds 967-232391-050 Silane 0-50 ppm ±2% FS T90≤60 seconds 967-555591-020 Sulfur Dioxide 0-20 ppm ±2% FS T90≤20 seconds *Note: Acetylene can only be used with a Group A enclosure. *Note2: This product is a safety device to detect hazardous conditions, and is not intended for process control application in fruit ripening operations. *Note3: DC=Desert Climate Sensors are 3rd-party test report to ISA 92.00.01 2010 standard   SYSTEM SPECIFICATIONS: Sensor Type Continuous diffusion/adsorption 3-electrode electrochemical cell Plug-in field replaceable Intelligent Type Outputs Linear 4-20 mA DC RS-485 MODBUS-RTU Electrical Classification Explosion proof  CCSAUS Class I, Division 1, Groups B, C, D () Class I, Zone 1, Group IIC ATEX II 2 G Ex d ib IIB + H2 T4 GB Ingress Protection NEMA 4X, IP66 Safety Approvals CCSAUS ATEX CE Marking SIL2 Certified to IEC 61508   MECHANICAL SPECIFICATIONS: Dimensions 7"H x 2.2" Dia.; 178mmH x 65mm Dia. (sensor assembly only) 11"H x 6.1"W x 3.75"D; 280mmH x 155mmW x 96mmD (with junction box) Mounting holes (J-box) 5.5"; 140mm center to center Weight 2 lbs; 0.907kg (sensor only) 6 lbs; 2.72kg (w/aluminum j-box) 9 lbs; 4.08kg (w/stainless steel j-box)   ELECTRICAL SPECIFICATIONS: Power Input 11 - 30 VDC Power Consumption Normal operation = 30mA @ 24V (<0.75 watt) Maximum = 50mA @ 24V (1.2 watts) Inrush Current 500mA @ 24V (typical) RFI/EMI Protection Complies with EN50270 Analog Output Linear 4-20mA DC (1,000 ohms max loop load @ 24VDC) 0mA All Fault Diagnostics 2mA In-Calibration 4-20mA 0-100% full-scale 22mA Over-range condition Serial RS-485 Output RS-485 Modbus™ RTU Baud Rate 9600 BPS (9600, N, 8, 1 Half Duplex) Status Indicators 4-digit LED display with gas concentration Full-script menu prompts for AutoSpan, Set-up Options, and Fault Reporting Faults Monitored Loop, Input Voltage, Missing Sensor, Zero, Processor, Memory, Calibration Cable Requirements Power/Analog 3-wire shielded cable Maximum distance is 13,300 feet with 14 AWG Serial Output 2-wire twisted-pair with ground, shielded communication cable specifically for use with RS-485 installations Maximum distance is 4,000 feet to last sensor I/O Protection Over -voltage, Miswiring, EMI/RFI Immunity Product Data Sheet

Model FP-624D is a “Smart” gas detection sensor designed to detect and monitor combustible gas in air over the range of 0-100% LEL (lower explosive limit) using matched-pair catalytic bead technology. Model FP-624D features Detcon’s MicroSafeTM intelligent electronics, nonintrusiveoperator interface and comprehensive fault diagnostics. The sensor transmitter features an advanced universal design that fits all existing Detcon matched-pair catalytic bead sensors dating back more than 20 years. The sensor assembly includes the detector in stainless steel housing, a base connector board, an explosion proof enclosure (available in aluminum or stainless steel), a plug-in control transmitter circuit, and a splashguard with integral cal port. The packaging is Explosion Proof (Class I, Division 1, Groups C & D). Model FP-624D is equiped with a standard analog 4-20 mA current signal equivalent to the sensor range of detection, RS-485 serial communications port, 2 alarm relays and 1 fault relay, one-man remote calibration, self-adjusting zero and span, and LED indicators for fault, alarm, and calibration status. Detcon’s combustible gas sensor has an infinite shelf life and is supported by a 2-year warranty. Order Guide Specify junction box options (below) PN 966-524520-100 - Model FP-624D in Aluminum Junction Box PN 966-52452B-100 - Model FP-624D-316SS in Stainless Steel Junction Box APPLICATIONS: Oil and Gas Drilling Rigs Oil and Gas Production Sites Offshore Production Platforms FPSOs LNG/CNG Plants Refining and Petrochemical Pulp and Paper Mills Waste Water Treatment Plants FEATURES: Performance Certified to CSA 152 cCSAus for Class I, Division 1, Groups C & D Transmitter design fits all existing Detcon Catalytic Bead Sensors dating back 20 years Compatible with PLCs, SCADA, DCS, via 4-20 mA, and/or RS485, and/or alarm relays Sensor status and parameters accessible via RS-485 (Modbus™) Menu programmable relays standard (two alarms plus fault) Simple menu driven calibration - less than 3 minutes LED display and LED indicators for FAULT and CAL status Plug-in field-replaceable transmitter Long sensor life: averaging +5 years in harsh offshore drilling/production environments High resistance to poisons such as sulfides, chlorides, silicon-based contaminants etc. Low power consumption (less than 3.5 watts versus 8+ watts on competitive brands) Extensive Fault diagnostics SYSTEM SPECIFICATIONS: Sensor Type Matched-pair catalytic bead Sensor Life 3 to 5 years typical Measurement Range 0-100% LEL (lower explosive limit) Accuracy/Repeatability ±3% 0-50% LEL ±5% 50-100% LEL Response/Clearing Time T50 <10 seconds; T90 <30 seconds Zero Drift <5% per year Outputs Linear 4-20 mA DC HART (optional) 3 Relays (alarm 1, alarm 2, & fault) Contacts rated 5 amps Electrical Classification Explosion proof CSAus Class I, Division 1, Groups C, D (Tamb = -25°C to +40°C) Class I, Zone 1, Group IIB cCSA Class I, Division 1, Groups C, D (Tamb = -40°C to +40°C) Class I, Zone 1, Group IIB Performance Approvals CSA C22.2 #152 Safety Approvals cCSAus Ingress Protection NEMA 4X, IP66 Warranty Sensor: 2 year warranty Transmitter: 2 year warranty ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range -40°C to +40°C; -40°F to 104°F (CANADA) -25°C to +40°C; -13°F to 104°F (USA) Storage Temperature Range -40°C to +75°C; -40°F to +167°F Operating Humidity Range 0-99% RH non-condensing Operating Pressure Range Atmospheric ±10% MECHANICAL SPECIFICATIONS: Dimensions 10”H (including splashguard) x 6.1”W x 4.3”D 254mmH x 155mmW x 109mmD Mounting holes (J-box) 5.5”; 140mm center to center Weight 6 lbs; 2.72kg (w/aluminum j-box) 9 lbs; 4.08kg (w/stainless steel j-box) ELECTRICAL SPECIFICATIONS: Power Input 12 - 28 VDC Power Consumption Normal operation = 68mA (<1.7 watt) Maximum = 87mA (2 watts) RFI/EMI Protection Complies with ISO 92.0.01 Analog Output Linear 4-20mA DC (1,000 ohms max loop load @ 24VDC) 0mA All Fault Diagnostics 2mA In-Calibration 4-20mA 0-100% full-scale 22mA Over-range condition Status Indicators 4-digital LED display with gas concentration Full-script menu prompts for AutoSpan, Set-up Options, and Fault Reporting 4 LEDs for Alarm 1, Alarm 2, Fault, and Calibration Relay Outputs Alarm 1, Alarm 2, and Fault 5A @ 250VAC 5A @ 30VDC Faults Monitored Loop, Input Voltage, Zero Sensor, Processor, Memory, Calibration Cable Requirements Power/Analog 3-wire shielded cable Maximum distance is 13,300 feet with 14 AWG Serial Output 2-wire twisted-pair shielded cable specifically for use with RS-485 installations Maximum distance is 4,000 feet to last sensor I/O Protection Over-voltage, Miswiring, EMI/RFI Immunity Product Data Sheet

Model IR-700-CO2 is a non-intrusive “Smart” sensor designed to detect and monitor carbon dioxide gas in air using miniature non-dispersive Infrared Optical (NDIR) sensor technology. Available in a low and a high range version, ranges of detection (by volume) are 0-0.3%, 0-1%, 0-3%, 0-5% (low range version) and 0-10%, 0-25%, 0-50%, and 0-100% (high range version). The plug-in, field replaceable detector provides a selective response to CO2 and features over-sized gold-plated connections that help prevent corrosion. The Model 700’s rugged framework includes an electro-polished 316 stainless steel housing with fully encapsulated electronics and dual layer surge protection. This innovative design virtually eliminates sensor failure due to water ingress, corrosion, vibration, and transient spikes. A primary feature of the Model IR-700-CO2 is embedded intuitive software that simplifies operator interface by guiding the user through routine calibration, configuration, and fault diagnostic functions using a built-in alpha/numeric display. The Model IR700-CO2 is equipped with standard analog 4-20mA, and Modbus™ RS-485 outputs. Additional integration options include a Remote Alarm Module (RAM) & HART. Detcon’s carbon dioxide gas sensor has an infinite shelf life and is supported by a 5-year pro-rated warranty. Order Guide Specify junction box options (below) PN 967-405520-005 - IR-700-CO2 (5% Range) Sensor Assembly (no J-box) PN 967-401520-005 - IR-700-CO2 (5% Range) Sensor Assembly with Aluminum J-Box PN 967-404520-005 - IR-700-CO2 (5% Range) Sensor Assembly with 316 SS J-Box PN 967-425520-025 - IR-700-CO2 (25% Range) Sensor Assembly (no J-box) PN 967-421520-025 - IR-700-CO2 (25% Range) Sensor Assembly with Aluminum J-Box PN 967-424520-025 - IR-700-CO2 (25% Range) Sensor Assembly with 316 SS J-Box APPLICATIONS: Chemicals Pesticides Agriculture & Horticulture Food & Beverage Bottling Plants Sewer Entry Waste Water Treatment Plants Coal Gasification Pulp & Paper Mills Enhanced Oil Recovery FEATURES: Failsafe User-Friendly Interface LED Display (With Antiglare Cover) Full Text Display Method Non-intrusive Interface Auto Zero/Auto Span Pre-emptive Fault Diagnostics Environmentally Bulletproof Electropolished 316SS Construction 100% Epoxy Encapsulated Circuitry I/O Protection Water-Resistant, Corrosion-Resistant, Vibration-Resistant Modular and Serviceable Modular Design Plug and Play Components Quick Thread Release (For Sensor Replacement) Integral Calibration Port SYSTEM SPECIFICATIONS: Sensor Type Continuous diffusion/adsorption Non-dispersive Infrared Optical (NDIR) - CO2 Sub-miniature plug-in field replaceable Sensor Life 5 years typical Measurement Range (% by volume) 0-0.3, 0-0.5, 0-1, 0-3, 0-5 (low range version) 0-10, 0-15, 0-20, 0-25, 0-50, 0-100 (high range version) Accuracy/Repeatability ±5% of range Response Time T50 < 15 seconds, T90 < 40 seconds Outputs Linear 4-20 mA DC RS-485 MODBUS-RTU Electrical Classification Explosion proof cCSAus Class I, Division 1, Groups B, C, D (Tamb = -40°C to +75°C) Class I, Zone 1, Group IIB+H2 ATEX II 2 G Ex d IIB + H2 T4 Gb (Tamb = -40°C to +70°C) Ingress Protection NEMA 4X, IP66 Safety Approvals cCSAus ATEX CE Marking Warranty Plug-in detector - 5 year pro-rated Transmitter - 2 Years ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range -40°F to +167°F; -40°C to +75°C Storage Temperature Range -40°F to +167°F; -40°C to +75°C Operating Humidity Range 0-100% RH non-condensing MECHANICAL SPECIFICATIONS: Dimensions 7”H x 2.2” Dia.; 178mmH x 65mm Dia. (sensor assembly only) 11”H x 6.1”W x 3.75”D; 280mmH x 155mmW x 96mmD (with junction box) Mounting holes (J-box) 5.5”; 140mm center to center Weight 2 lbs; 0.907kg (sensor only) 6 lbs; 2.72kg (w/aluminum j-box) 9 lbs; 4.08kg (w/stainless steel j-box) ELECTRICAL SPECIFICATIONS: Power Input 11-30 VDC Power Consumption Normal operation = 68mA (<1.7 watt) Maximum = 85mA (2 watts) Inrush Current 0.67A @ 24V RFI/EMI Protection Complies with EN50270 Analog Output Linear 4-20mA DC (1,000 ohms max loop load @ 24VDC) 0mA All Fault Diagnostics 2mA In-Calibration 4-20mA 0-100% full-scale 22mA Over-range condition Serial RS-485 Output RS-485 Modbus™ RTU Baud Rate 9600 BPS (9600,N,8,1 Half Duplex) Status Indicators 4-digit LED display with gas concentration Full-script menu prompts for AutoSpan, Set-up Options, and Fault Reporting Faults Monitored Loop, Input Voltage, Zero, Sensor, Processor, Memory, Calibration Cable Requirements Power/Analog 3-wire shielded cable Maximum distance is 13,300 feet with 14 AWG Serial Output 2-wire twisted-pair shielded cable specifically for use with RS-485 installations Maximum distance is 4,000 feet to last sensor I/O Protection Over-voltage, Miswiring, EMI/RFI Immunity INTEGRATION OPTIONS Remote Alarm Module (Remote Operation and 2 Alarm Relays plus Fault) Hart Integration Module (Hart Communication Protocol version 7.0, HART Registered) Product Data Sheet

Model 1000-H2S Analyzer is designed to provide continuous, accurate, real-time measurement of hydrogen sulfide gas concentrations in a wide variety of process gas streams. With new technology and design, the Process Analyzer has a measurement range of 0-500 ppm. All H2 S analyzers in the Model 1000 Series employ Detcon’s 3-Electrode Electrochemical sensor element and feature a microprocessor-based signal-conditioning transmitter with local digital display, fault supervision, calibration mode indicator, 4-20mA, alarm relays and an RS-485 serial port. The lowest range for this unit is 0-10 ppm. The instrument package is rated for Non-Hazardous areas. APPLICATIONS: Gas Well Testing & Analysis Gas Well Production Sites Gas Treatment Plants Gas Transmission Custody Transfer Compliance FEATURES: Continuous Measurement with Superior Uptime Ranges from 0-500 ppm Readily Field Replaceable Sensors Simple Operation and Field Calibraton Standard Outputs: 4-20 mA, RS-485, 3 Relays Non-Hazardous Areas rated Sensor Type 3-Electrode Electrochemical Measurement Range Low Range 0-10/20/50/100/150/250/500 ppm Accuracy/Repeatability ±10% of reading or ±2.5% of range whichever is greater Response/Clearing Time T50 <30 seconds T90 <1 minute Max output to over-range gas: <10 seconds Operating Temperature Range -40°F to +122°F; -40°C to +50°C Operating Pressure Requirements Inlet: 10 ±2 psig Vent: Atmospheric ±1 psig Outputs Linear 4-20 mA DC RS-485 Modbus™ 3 Relays (alarm 1, alarm 2, & fault) Contacts rated 5 amps Power Input 117/220 VAC 18-36 VDC Electrical Classification Non-Hazardous Areas Warranty Sensor: 6 months Transmitter: 2 year Analyzer Weight 80 lbs. Shipping Weight 140 lbs Dimensions 29" x 29" x 8" Product Data Sheet

What is the Teledyne Detcon OLCT700?The Teledyne Detcon OLCT700 is: OLCT 700 intelligent fixed gas detection transmitter for harsh and extreme locations; electropolished 316 stainless steel housing, plug-in sensor element (catalytic 0-100 percent LEL, MOS H2S, or infrared hydrocarbon/CO2), scrolling LED display, 4-20 mA and Modbus RS-485 outputs, ATEX Ex d IIB+H2 T4 Gb, SIL2 capable per IEC 61508. The Teledyne OLCT 700/710 are intelligent fixed gas detection sensor modules designed for harsh and extreme locations, sold under the Teledyne Oldham Simtronics brand. They combine an electropolished 316 stainless steel housing, multilayered transient spike protection, and 100 percent encapsulated electronics that make the sensor immune to water ingress and corrosion, with plug-in gas sensor elements that are replaced in the field. Available detection technologies are a matched-pair catalytic bead combustible sensor (FP, 0-100 percent LEL), a solid state MOS hydrogen sulfide sensor (TP, 0-20 to 0-200 ppm), and infrared sensors (IR) for combustible hydrocarbons or CO2 (0-5 percent volume standard). The OLCT 710 adds an integral junction box with an optional surge protection termination module, while both versions provide dual outputs (linear 4-20 mA and Modbus RS-485), a scrolling alphanumeric LED display, and non-intrusive magnetic programming. The OLCT 700/710 Transmitters group in the Detcon price book lists 11 orderable part numbers; this is the 316 stainless steel variant.Key specificationsSensor technologies: matched-pair catalytic bead (FP, 0-100 percent LEL), solid state MOS H2S (TP, 0-20/0-50/0-100/0-200 ppm), infrared combustible hydrocarbon or CO2 (IR, 0-5 percent vol standard)Dual outputs: linear 4-20 mA DC and RS-485 Modbus RTUApprovals: ATEX II 2G Ex d IIB+H2 T4 Gb; SIL2 per IEC 61508 (except CO2); OLCT 700 IR and FP performance approved to ISA 12.13 and CSA #152Electropolished 316 stainless steel construction, 100 percent encapsulated electronics, IP66Input voltage 11.5-28 VDC, power consumption under 2 W typicalScrolling full-text alphanumeric LED display with pre-emptive fault diagnostics and auto zero / auto spanOLCT 710 includes an integral junction box (surge protection termination module optional); 3/4 inch NPT thread, splashguard with integral calibration portSensor warranties: 5 years on the MOS H2S cell, 2 years on catalytic, infrared, and electronicsWhere is it used?Typical service: Toxic and flammable gas monitoring in harsh and extreme industrial locations; SIL 2 rated fixed gas detection safety systems; Hydrogen sulfide, combustible gas, and CO2 monitoring in process plants.How do I order or get a quote?PE Energy supplies the Teledyne Detcon OLCT700 on a quote basis: submit a request with your part number and application details and our team returns pricing and lead time. Detcon fixed gas detection is quoted rather than sold at list price because most items ship configured for gas type, range, and area classification. This part belongs to the same product line as the OLCT 700 / 710 fixed gas detection we carry.

Model TP-524D is a “Smart” gas detection sensor designed to detect and monitor H2S in air over the ranges of 0-20 ppm, 0-50 ppm, and 0-100 ppm using a proprietary solid state metal oxide semiconductor technology. This innovative design offers several advantages including longer sensor life and better temperature and humidityperformance. Model TP-524D features Detcon’s MicroSafe™ intelligent electronics, non-intrusive operator interface and comprehensive fault diagnostics. The sensor transmitter features an advanced universal design that fits all existing Detcon MOS H2S sensors dating back more than 20 years. The sensor assembly includes a MOS detector in stainless steel housing, a base connector board, an explosion proof enclosure (available in aluminum or stainless steel), a plug-in control transmitter circuit, and a splashguard with integral cal port. The packaging is Explosion Proof (Class I, Division 1, Groups B, C, D). Model TP-524D is equipped with a standard analog 4-20 mA current signal equivalent to the sensor range of detection, self-adjusting zero and span, and LED indicators for fault and calibration status. A HART communications option is also available. Detcon’s solid state MOS sensor is supported by an industry leading 10-year conditional warranty Order Guide Specify junction box options (below) PN 965-015420-100 - Model TP-524D in Aluminum Junction Box PN 965-01542B-100 - Model TP-524D-316SS in Stainless Steel Junction Box PN 9H5-015420-100 - Model TP-524D with HART in Aluminum Junction Box PN 9H5-01542B-100 - Model TP-524D-316SS with HART in Stainless Steel Junction Box Note above part numbers are for 0-100 ppm range. For 0-20 ppm or 0-50 ppm range replace -100 with -020 or -050 respectively APPLICATIONS: Oil and Gas Drilling Rigs Oil and Gas Production Sites Refining and Petrochemical Pulp and Paper Mills Waste Water Treatment Plants FEATURES: cCSAus approved for Class I, Division 1, Groups B, C, & D Transmitter design fits all existing Detcon MOS H2S Sensors dating back 20 years Simple menu driven calibration - less than 3 minutes LED display and LED indicators for FAULT and CAL status Plug-in field-replaceable transmitter Response similar to electrochemical sensors: T-50 <30 sec., T-90 <60 sec. 10 year conditional sensor warranty Direct response constant temperature control Withstands exposure to high range concentrations of H2S and other acid gases Impervious to high moisture environments in both powered and non-powered mode Extensive Fault diagnostics SYSTEM SPECIFICATIONS: Sensor Type Continuous diffusion/adsorption CHEMFET Solid State Metal Oxide Semiconductor Sensor Life 5 to 10 years typical Measurement Range 0-20 ppm, 0-50 ppm, 0-100 ppm Accuracy/Repeatability ±10% of reading or ±2 ppm (greater of ) Response/Clearing Time T50 <30 seconds; T90 <60 seconds Outputs Linear 4-20 mA DC HART (optional) Electrical Classification Explosion proof CSAus Class I, Division 1, Groups B, C, D (Tamb = -25°C to +40°C) ) Class I, Zone 1, Group IIB+H2 cCSA Class I, Division 1, Groups B, C, D (Tamb = -40°C to +40°C) Class I, Zone 1, Group IIB+H2 FM Class I, Division 1, Groups B, C, D (Tamb = -40°C to +60°C) Complies with ANSI/ISA 92.00.01-2010 ATEX Ex d IIB+H2 T4 (Tamb = -40°C to +60°C) Ingress Protection NEMA 4X, IP66 Warranty Plug-in detector - 10 year conditional Transmitter - 2 year ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range -40°C to +40°C; -40°F to 104°F (CANADA) -25°C to +40°C; -13°F to 104°F (USA) Storage Temperature Range -35°C to +55°C; -13°F to +131°F Operating Humidity Range 5-100% RH non-condensing Operating Pressure Range Atmospheric ±10% MECHANICAL SPECIFICATIONS: Dimensions 10”H (including splashguard) x 6.1”W x 4.3”D 254mmH x 155mmW x 109mmD Mounting holes (J-box) 5.5”; 140mm center to center Weight 6 lbs; 2.72kg (w/aluminum j-box) 9 lbs; 4.08kg (w/stainless steel j-box) ELECTRICAL SPECIFICATIONS: Power Input 12-28 VDC Power Consumption Normal operation = 68mA (<1.7 watt) Maximum = 85mA (2 watts) RFI/EMI Protection Complies with EN 50270 Analog Output Linear 4-20mA DC (1,000 ohms max loop load @ 24VDC) 0mA All Fault Diagnostics 2mA In-Calibration 4-20mA 0-100% full-scale 22mA Over-range condition Status Indicators 4-digit LED display with gas concentration Full-script menu prompts for AutoSpan, Set-up Options, and Fault Reporting LEDs for Fault and Calibration Faults Monitored Heater, Loop, Input Voltage Sensor, Processor, Memory, Calibration Cable Requirements Power/Analog 3-wire shielded cable Maximum distance is 13,300 feet with 14 AWG I/O Protection Over-voltage, Miswiring, EMI/RFI Immunity Product Data Sheet