Des-Case

Off-Line Unit, single housing, pump/motor |  2.1 lpm/ 0.55 gpm | 255/460 VAC 60Hz | 3-phase, incl. 1 Microglass (1 micron, ß1≥200) element (30G1), visual indicator, mounting plate and single-stage (parallel) filtration The hydraulic market accepts that 80% of mechanical failures are caused by oil contamination in the system. The Off-Line Filtration System (OLU) attacks contamination of your equipment at the source. In addition to solid particles, this kidney loop system is also capable of removing water from the oil. For critical applications that need regular filtration, or a maintenance location that is hard to access, permanently-mounted OLU improve equipment reliability with continuous-duty, always-on filtration that cleans oil and keeps it clean. A properly sized OLU can turn over the entire volume of a reservoir several times a day (we recommend 5-7 turns), maintaining ISO fluid cleanliness codes well below the upper limit Specifications Nominal Flow 2,1 l/min Standard Max. Oil Temperature¹ 80°C Max. pressure filter housing 20 bar Inlet connection² 3⁄8’’ BSP female Outlet connection 1⁄2’’ BSP female Power supply Electric Motor Various electrical power supplies possible (see ordering code) Suitable elements 30HB, 30HV, 30NB, 30NV, 30G1B, 30G1V,30G3B, 30G3V, 30G6B, 30G6V, 30G12B, 30G12V 30A5V By-pass openings pressure 6,2 bar (at 0 bar back pressure) Pump safety valve 15 bar Max. tank volume ±1.350 l Fluid compatibility³ Hydraulic fluids according to ISO 2943 Approximate weight 14 kg ¹ For other oil temperatures, please contact Des-Case ² Inlet Connections are pump dependent. Please contact Des-Case. ³ For other fluids, please contact Des-Case Features Performance The principle of the RMF Systems filters is based on the unique original filter elements. With a choice of filter fineness down to 0,5 micron and Filter efficiency up to β4=10.000, they have the capacity to remove even the smallest of dirt particles from the oil. RMF System’s Off-line kidney loop oil filtration system offers a wide range of elements in micron sizes, filter media, and fluid compatibility. Combi-elements (water and solid particle retention) complement the unique range. Water Absorbing RMF Water absorbing filters are off-line filters that use a special water-absorbing spin-on as a pre-filter. The fluid is pumped through the pre-filter which removes most water and larger solid contamination, in the second stage the fluid passes through the RMF cellulose micro filter where final water removal takes place as well as solid particle removal. Applications The RMF off-line units attack contamination of your system at the source. In addition to solid particles, these filters are also capable of removing water from the oil. The use of RMF filters means less defects, less maintenance and less wear and tear of the hydraulic components. The RMF Off-Line units can be fitted to every imaginable industrial application where hydraulic or lubrication systems are present. In recent years RMF Systems have developed a great deal of experience in cleaning and keeping clean hydraulic and lubrication systems in the: Steel industry Plastic moulding industry Maritime industry Petro-chemical industry Paper industry Efficiency The hydraulic market accepts that 80% of mechanical failures are caused by contamination in the system. The RMF Off-Line Units attack contamination of your systems at source. In addition to solid particles, these filters are also capable of removing water from the oil. The use of RMF filters means less defects, less maintenance, and less wear and tear of the hydraulic components. The RMF Off-Line Units can be fitted to every imaginable industrial application where hydraulic or lubrication systems are present. Benefits Reduced cost of ownership Extremely clean oil due to high filtration efficiency Prevention of channel forming by radial filtration direction Large dirt holding capacity Large water holding capacity Compact and easy maintenance design Longer usage life for oil and components TDS

Off-Line Unit, single housing, pump/motor |  2.1 lpm/ 0.55 gpm | 110 VAC 60Hz | 1-phase, incl. 1 Microglass (3 micron, ß3≥200) element (30G3), visual indicator, mounting plate and single-stage (parallel) filtration The hydraulic market accepts that 80% of mechanical failures are caused by oil contamination in the system. The Off-Line Filtration System (OLU) attacks contamination of your equipment at the source. In addition to solid particles, this kidney loop system is also capable of removing water from the oil. For critical applications that need regular filtration, or a maintenance location that is hard to access, permanently-mounted OLU improve equipment reliability with continuous-duty, always-on filtration that cleans oil and keeps it clean. A properly sized OLU can turn over the entire volume of a reservoir several times a day (we recommend 5-7 turns), maintaining ISO fluid cleanliness codes well below the upper limit Specifications Nominal Flow 2,1 l/min Standard Max. Oil Temperature¹ 80°C Max. pressure filter housing 20 bar Inlet connection² 3⁄8’’ BSP female Outlet connection 1⁄2’’ BSP female Power supply Electric Motor Various electrical power supplies possible (see ordering code) Suitable elements 30HB, 30HV, 30NB, 30NV, 30G1B, 30G1V,30G3B, 30G3V, 30G6B, 30G6V, 30G12B, 30G12V 30A5V By-pass openings pressure 6,2 bar (at 0 bar back pressure) Pump safety valve 15 bar Max. tank volume ±1.350 l Fluid compatibility³ Hydraulic fluids according to ISO 2943 Approximate weight 14 kg ¹ For other oil temperatures, please contact Des-Case ² Inlet Connections are pump dependent. Please contact Des-Case. ³ For other fluids, please contact Des-Case Features Performance The principle of the RMF Systems filters is based on the unique original filter elements. With a choice of filter fineness down to 0,5 micron and Filter efficiency up to β4=10.000, they have the capacity to remove even the smallest of dirt particles from the oil. RMF System’s Off-line kidney loop oil filtration system offers a wide range of elements in micron sizes, filter media, and fluid compatibility. Combi-elements (water and solid particle retention) complement the unique range. Water Absorbing RMF Water absorbing filters are off-line filters that use a special water-absorbing spin-on as a pre-filter. The fluid is pumped through the pre-filter which removes most water and larger solid contamination, in the second stage the fluid passes through the RMF cellulose micro filter where final water removal takes place as well as solid particle removal. Applications The RMF off-line units attack contamination of your system at the source. In addition to solid particles, these filters are also capable of removing water from the oil. The use of RMF filters means less defects, less maintenance and less wear and tear of the hydraulic components. The RMF Off-Line units can be fitted to every imaginable industrial application where hydraulic or lubrication systems are present. In recent years RMF Systems have developed a great deal of experience in cleaning and keeping clean hydraulic and lubrication systems in the: Steel industry Plastic moulding industry Maritime industry Petro-chemical industry Paper industry Efficiency The hydraulic market accepts that 80% of mechanical failures are caused by contamination in the system. The RMF Off-Line Units attack contamination of your systems at source. In addition to solid particles, these filters are also capable of removing water from the oil. The use of RMF filters means less defects, less maintenance, and less wear and tear of the hydraulic components. The RMF Off-Line Units can be fitted to every imaginable industrial application where hydraulic or lubrication systems are present. Benefits Reduced cost of ownership Extremely clean oil due to high filtration efficiency Prevention of channel forming by radial filtration direction Large dirt holding capacity Large water holding capacity Compact and easy maintenance design Longer usage life for oil and components TDS

Off-Line Unit, single housing, pump/motor |  4.2 lpm/ 1.11 gpm | 255/460 VAC 60Hz | 3-phase, incl. 1 Microglass (1 micron, ß1≥200) element (60G1), visual indicator, mounting plate and single-stage (parallel) filtration The hydraulic market accepts that 80% of mechanical failures are caused by oil contamination in the system. The Off-Line Filtration System (OLU) attacks contamination of your equipment at the source. In addition to solid particles, this kidney loop system is also capable of removing water from the oil. For critical applications that need regular filtration, or a maintenance location that is hard to access, permanently-mounted OLU improve equipment reliability with continuous-duty, always-on filtration that cleans oil and keeps it clean. A properly sized OLU can turn over the entire volume of a reservoir several times a day (we recommend 5-7 turns), maintaining ISO fluid cleanliness codes well below the upper limit Specifications Nominal Flow 4,2 l/min Standard Max. Oil Temperature¹ 80°C Max. pressure filter housing 20 bar Inlet connection² 1⁄2’’ BSP female Outlet connection 1⁄2’’ BSP female Power supply Electric Motor Various electrical power supplies possible (see ordering code) Suitable elements 60HB 60HV,60NB, 60NV,60G1B, 60G1V, 60G3B, 60G3V,60G6B, 60G6V, 60G12B, 60G12V60A5V By-pass openings pressure 6,2 bar (at 0 bar back pressure) Pump safety valve 15 bar Max. tank volume ± 2.700 l Fluid compatibility³ Hydraulic fluids according to ISO 2943 Approximate weight 18 kg ¹ For other oil temperatures, please contact Des-Case² Inlet Connections are pump dependent. Please contact Des-Case.³ For other fluids, please contact Des-CaseFeatures Performance The principle of the RMF Systems filters is based on the unique original filter elements. With a choice of filter fineness down to 0,5 micron and Filter efficiency up to β4=10.000, they have the capacity to remove even the smallest of dirt particles from the oil. RMF System’s Off-line kidney loop oil filtration system offers a wide range of elements in micron sizes, filter media, and fluid compatibility. Combi-elements (water and solid particle retention) complement the unique range. Water Absorbing RMF Water absorbing filters are off-line filters that use a special water-absorbing spin-on as a pre-filter. The fluid is pumped through the pre-filter which removes most water and larger solid contamination, in the second stage the fluid passes through the RMF cellulose micro filter where final water removal takes place as well as solid particle removal. Applications The RMF off-line units attack contamination of your system at the source. In addition to solid particles, these filters are also capable of removing water from the oil. The use of RMF filters means less defects, less maintenance and less wear and tear of the hydraulic components. The RMF Off-Line units can be fitted to every imaginable industrial application where hydraulic or lubrication systems are present. In recent years RMF Systems have developed a great deal of experience in cleaning and keeping clean hydraulic and lubrication systems in the: Steel industry Plastic moulding industry Maritime industry Petro-chemical industry Paper industry Efficiency The hydraulic market accepts that 80% of mechanical failures are caused by contamination in the system. The RMF Off-Line Units attack contamination of your systems at source. In addition to solid particles, these filters are also capable of removing water from the oil. The use of RMF filters means less defects, less maintenance, and less wear and tear of the hydraulic components. The RMF Off-Line Units can be fitted to every imaginable industrial application where hydraulic or lubrication systems are present. Benefits Reduced cost of ownership Extremely clean oil due to high filtration efficiency Prevention of channel forming by radial filtration direction Large dirt holding capacity Large water holding capacity Compact and easy maintenance design Longer usage life for oil and components TDS

Off-Line Unit, single housing, pump/motor |  4.2 lpm/ 1.11 gpm | 110 VAC 60Hz | 1-phase, incl. 1 Microglass (3 micron ß3≥200) element (60G3), visual indicator, mounting plate and single-stage (parallel) filtration The hydraulic market accepts that 80% of mechanical failures are caused by oil contamination in the system. The Off-Line Filtration System (OLU) attacks contamination of your equipment at the source. In addition to solid particles, this kidney loop system is also capable of removing water from the oil. For critical applications that need regular filtration, or a maintenance location that is hard to access, permanently-mounted OLU improve equipment reliability with continuous-duty, always-on filtration that cleans oil and keeps it clean. A properly sized OLU can turn over the entire volume of a reservoir several times a day (we recommend 5-7 turns), maintaining ISO fluid cleanliness codes well below the upper limit Specifications Nominal Flow 4,2 l/min Standard Max. Oil Temperature¹ 80°C Max. pressure filter housing 20 bar Inlet connection² 1⁄2’’ BSP female Outlet connection 1⁄2’’ BSP female Power supply Electric Motor Various electrical power supplies possible (see ordering code) Suitable elements 60HB 60HV,60NB, 60NV, 60G1B, 60G1V, 60G3B, 60G3V, 60G6B, 60G6V, 60G12B, 60G12V 60A5V By-pass openings pressure 6,2 bar (at 0 bar back pressure) Pump safety valve 15 bar Max. tank volume ± 2.700 l Fluid compatibility³ Hydraulic fluids according to ISO 2943 Approximate weight 18 kg ¹ For other oil temperatures, please contact Des-Case ² Inlet Connections are pump dependent. Please contact Des-Case. ³ For other fluids, please contact Des-Case Features Performance The principle of the RMF Systems filters is based on the unique original filter elements. With a choice of filter fineness down to 0,5 micron and Filter efficiency up to β4=10.000, they have the capacity to remove even the smallest of dirt particles from the oil. RMF System’s Off-line kidney loop oil filtration system offers a wide range of elements in micron sizes, filter media, and fluid compatibility. Combi-elements (water and solid particle retention) complement the unique range. Water Absorbing RMF Water absorbing filters are off-line filters that use a special water-absorbing spin-on as a pre-filter. The fluid is pumped through the pre-filter which removes most water and larger solid contamination, in the second stage the fluid passes through the RMF cellulose micro filter where final water removal takes place as well as solid particle removal. Applications The RMF off-line units attack contamination of your system at the source. In addition to solid particles, these filters are also capable of removing water from the oil. The use of RMF filters means less defects, less maintenance and less wear and tear of the hydraulic components. The RMF Off-Line units can be fitted to every imaginable industrial application where hydraulic or lubrication systems are present. In recent years RMF Systems have developed a great deal of experience in cleaning and keeping clean hydraulic and lubrication systems in the: Steel industry Plastic moulding industry Maritime industry Petro-chemical industry Paper industry Efficiency The hydraulic market accepts that 80% of mechanical failures are caused by contamination in the system. The RMF Off-Line Units attack contamination of your systems at source. In addition to solid particles, these filters are also capable of removing water from the oil. The use of RMF filters means less defects, less maintenance, and less wear and tear of the hydraulic components. The RMF Off-Line Units can be fitted to every imaginable industrial application where hydraulic or lubrication systems are present. Benefits Reduced cost of ownership Extremely clean oil due to high filtration efficiency Prevention of channel forming by radial filtration direction Large dirt holding capacity Large water holding capacity Compact and easy maintenance design Longer usage life for oil and components TDS

8 gpm, 1.7 hp, 0-3000 rpms pneumatic motor base model with dual-stage filtration, manual bypass and sample valves A permanently mounted, continuous-duty system for critical applications or difficult to access equipment. It also can serve as a maintenance station. Where It’s Used Decontaminating systems Cooling systems Collecting oil samples for analysis What Can I Customize? Flow rates Filter bypass Sample valves Oil cooler Temperature gauge Color Hose-end connection sizes and types Micron rating of filters Performance For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Plumbing Hoses: Clear PVC with steel wire Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi (5.49bar) Weight: Approximately 100-130lbs (will vary depending on options selected) Dimensions: 15.6"L x 23.4"W x 25.8"H TDS