Des-Case
Showing 226–270 of 401 results
-
Des-Case DC-S10000W08FBU Filter Cart – Pack of 6
$124.52Water Filter & 22 Micron Element - Beta 1000 Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi Weight: Approximately 100-150lbs (will vary depending on options selected) Dimensions: 18.8″L x 21.5″W x 46.4″H Replacement Parts Elements are sold in cases of six and can be mixed and matched. Features: Applications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Reservoir top-offs Flushing systems Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation Dual-stage filtration 12′ hose assemblies with various quick connect options Pneumatic wheels for easy mobility Industrial powder-coated paint Heavy-duty cart with oil catch pan One-year warranty 25 ft cord (for electric motors only) TDS -
Des-Case DC-SB-VI Breather Adapter
$40.891€³ NPT Vacuum Indicator Adapter (DC-ND-35) Equipment Connection / Port Size: 1€³ NPT Male -
Des-Case DC-SDVA-12M Breather Adapter
$119.53Standard, Ventguard & Hydroguard Breather Adapters Steel Vent Valve Adapter Breather Connection Size: 1" NPT Female Equipment Connection Size: 3/4" NPT Male -
Des-Case DC-SDVA-16M Breather Adapter
$119.53Standard, Ventguard & Hydroguard Breather Adapters Steel Vent Valve Adapter Breather Connection Size: 1" NPT Female Equipment Connection Size: 1" NPT Male -
Des-Case DC-VG-1 Desiccant Breather
Price range: $81.55 through $489.30VentGuard Desiccant Series Breathers Des-Case VentGuard breathers have check-valve technology that isolates the system and only ‘breathes’ when necessary, making them an ideal solution to protect low-flow applications with intermittent operations. Check valves provide slight system pressurization that allows for controlled breathing without excessive pressure build-up. The system breathes only when pressured to do so, and then the air is cleaned and dried before it is introduced into the system, ensuring a clean, dry headspace. This control mechanism also prevents premature saturation of the silica gel and extends breather life, a problem not as easily tackled by standard desiccant breathers exposed to extreme moisture. Features By the Numbers 1–Domed Cap A domed cap allows for better washdown runoff. 2–Integrated Nylon Standpipe The integrated standpipe provides excellent vibration resistance and dissipates impact throughout the unit, eliminating weak points. It also allows even airflow distribution throughout the unit, eliminating inaccurate readings of desiccant saturation. 3–External Ribs External ribs on shell to create greater durability and grip when installing or replacing breather. 4–Integrated Drip Ring An integrated drip ring keeps shedding water from entering the vent holes. 5–Threaded Mounting Easily replaces standard filler/breather cap with multi-fit connection or one of several adapters. 6–Larger, High-Capacity Check Valves High-capacity check valves allow for increased airflow at low cracking pressure. 7-Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 8–Enhanced Seal An enhanced seal eliminates potential for airflow bypass. Specifications Unit Height: 5.36 in (136 mm) Unit Diameter: 2.52 in (64 mm) Filter Efficiency: 3μ absolute (β3≥200) Amount of Silica Gel: 0.3 lbs (127 g) Adsorption Capacity: 1.7 fl oz (50 ml) Max. Flow Rate: 1 cfm (41 lpm) Operating Temperature Range: -20°F to 200°F (-29°C to 93°C) Connection Size: 3/8″ Multi-Fit (NPT, NPSM, BSPP, BSPT) Suction/Return Rate at 1 psid: 11 gpm (41 lpm) Gearbox/Storage Tank Max. Volume: 35 gal (132 L) Hydraulic Reservoir Max. Volume: 5 gal (19 L) Micron Rating: 3 micron TDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE VentGuard Series Breathers: How Check-Valve Technology Protects Low-Medium Flow Systems. Or listen on RSS.com. -
Des-Case DC-VG-2 Desiccant Breather
Price range: $121.70 through $730.20VentGuard Desiccant Series Breathers Des-Case VentGuard breathers have check-valve technology that isolates the system and only ‘breathes’ when necessary, making them an ideal solution to protect low-flow applications with intermittent operations. Check valves provide slight system pressurization that allows for controlled breathing without excessive pressure build-up. The system breathes only when pressured to do so, and then the air is cleaned and dried before it is introduced into the system, ensuring a clean, dry headspace. This control mechanism also prevents premature saturation of the silica gel and extends breather life, a problem not as easily tackled by standard desiccant breathers exposed to extreme moisture. Features By the Numbers 1–Domed Cap A domed cap allows for better washdown runoff. 2–Integrated Nylon Standpipe The integrated standpipe provides excellent vibration resistance and dissipates impact throughout the unit, eliminating weak points. It also allows even airflow distribution throughout the unit, eliminating inaccurate readings of desiccant saturation. 3–External Ribs External ribs on shell to create greater durability and grip when installing or replacing breather. 4–Integrated Drip Ring An integrated drip ring keeps shedding water from entering the vent holes. 5–Threaded Mounting Easily replaces standard filler/breather cap with multi-fit connection or one of several adapters. 6–Larger, High-Capacity Check Valves High-capacity check valves allow for increased airflow at low cracking pressure. 7-Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 8–Enhanced Seal An enhanced seal eliminates potential for airflow bypass. Specifications Unit Height: 6.00 in (152 mm) Unit Diameter: 4.10 in (104 mm) Filter Efficiency: 3μ absolute (β3≥200) Amount of Silica Gel: 0.8 lbs (365 g) Adsorption Capacity: 5 fl oz (142 ml) Max. Flow Rate: 12 cfm (340 lpm) Operating Temperature Range: -20°F to 200°F (-29°C to 93°C) Connection Size: 1″ Multi-Fit (NPT, NPSM, BSPP, BSPT) Suction/Return Rate at 1 psid: 90 gpm (340 lpm) Gearbox/Storage Tank Max. Volume: 200 gal (757 L) Hydraulic Reservoir Max. Volume: 60 gal (227 L) Micron Rating: 3 micron TDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE VentGuard Series Breathers: How Check-Valve Technology Protects Low-Medium Flow Systems. Or listen on RSS.com. -
Des-Case DC-VG-3 Desiccant Breather
Price range: $135.96 through $815.76VentGuard Desiccant Series Breathers Des-Case VentGuard breathers have check-valve technology that isolates the system and only ‘breathes’ when necessary, making them an ideal solution to protect low-flow applications with intermittent operations. Check valves provide slight system pressurization that allows for controlled breathing without excessive pressure build-up. The system breathes only when pressured to do so, and then the air is cleaned and dried before it is introduced into the system, ensuring a clean, dry headspace. This control mechanism also prevents premature saturation of the silica gel and extends breather life, a problem not as easily tackled by standard desiccant breathers exposed to extreme moisture. Features By the Numbers 1–Domed Cap A domed cap allows for better washdown runoff. 2–Integrated Nylon Standpipe The integrated standpipe provides excellent vibration resistance and dissipates impact throughout the unit, eliminating weak points. It also allows even airflow distribution throughout the unit, eliminating inaccurate readings of desiccant saturation. 3–External Ribs External ribs on shell to create greater durability and grip when installing or replacing breather. 4–Integrated Drip Ring An integrated drip ring keeps shedding water from entering the vent holes. 5–Threaded Mounting Easily replaces standard filler/breather cap with multi-fit connection or one of several adapters. 6–Larger, High-Capacity Check Valves High-capacity check valves allow for increased airflow at low cracking pressure. 7-Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 8–Enhanced Seal An enhanced seal eliminates potential for airflow bypass. Specifications Unit Height: 8.00 in (203 mm) Unit Diameter: 4.10 in (104 mm) Filter Efficiency: 3μ absolute (β3≥200) Amount of Silica Gel: 1.4 lbs (643 g) Adsorption Capacity: 9 fl oz (251 ml) Max. Flow Rate: 11 cfm (311 lpm) Operating Temperature Range: -20°F to 200°F (-29°C to 93°C) Connection Size: 1″ Multi-Fit (NPT, NPSM, BSPP, BSPT) Suction/Return Rate at 1 psid: 82 gpm (311 lpm) Gearbox/Storage Tank Max. Volume: 350 gal (1325 L) Hydraulic Reservoir Max. Volume: 100 gal (379 L) Micron Rating: 3 micron TDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE VentGuard Series Breathers: How Check-Valve Technology Protects Low-Medium Flow Systems. Or listen on RSS.com. -
Des-Case DC-VG-4 Desiccant Breather
Price range: $150.20 through $901.20VentGuard Desiccant Series Breathers Des-Case VentGuard breathers have check-valve technology that isolates the system and only ‘breathes’ when necessary, making them an ideal solution to protect low-flow applications with intermittent operations. Check valves provide slight system pressurization that allows for controlled breathing without excessive pressure build-up. The system breathes only when pressured to do so, and then the air is cleaned and dried before it is introduced into the system, ensuring a clean, dry headspace. This control mechanism also prevents premature saturation of the silica gel and extends breather life, a problem not as easily tackled by standard desiccant breathers exposed to extreme moisture. Features By the Numbers 1–Domed Cap A domed cap allows for better washdown runoff. 2–Integrated Nylon Standpipe The integrated standpipe provides excellent vibration resistance and dissipates impact throughout the unit, eliminating weak points. It also allows even airflow distribution throughout the unit, eliminating inaccurate readings of desiccant saturation. 3–External Ribs External ribs on shell to create greater durability and grip when installing or replacing breather. 4–Integrated Drip Ring An integrated drip ring keeps shedding water from entering the vent holes. 5–Threaded Mounting Easily replaces standard filler/breather cap with multi-fit connection or one of several adapters. 6–Larger, High-Capacity Check Valves High-capacity check valves allow for increased airflow at low cracking pressure. 7-Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 8–Enhanced Seal An enhanced seal eliminates potential for airflow bypass. Specifications Unit Height: 10.00 in (254 mm) Unit Diameter: 4.10 in (104 mm) Filter Efficiency: 3μ absolute (β3≥200) Amount of Silica Gel: 2.0 lbs (913 g) Adsorption Capacity: 12 fl oz (356 ml) Max. Flow Rate: 11 cfm (311 lpm) Operating Temperature Range: -20°F to 200°F (-29°C to 93°C) Connection Size: 1″ Multi-Fit (NPT, NPSM, BSPP, BSPT) Suction/Return Rate at 1 psid: 82 gpm (311 lpm) Gearbox/Storage Tank Max. Volume: 500 gal (1893 L) Hydraulic Reservoir Max. Volume: 200 gal (757 L) Micron Rating: 3 micron TDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE VentGuard Series Breathers: How Check-Valve Technology Protects Low-Medium Flow Systems. Or listen on RSS.com. -
Des-Case DC-VG-BB Desiccant Breather
Price range: $68.60 through $411.60VentGuard Desiccant Series Breathers Des-Case VentGuard breathers have check-valve technology that isolates the system and only ‘breathes’ when necessary, making them an ideal solution to protect low-flow applications with intermittent operations. Check valves provide slight system pressurization that allows for controlled breathing without excessive pressure build-up. The system breathes only when pressured to do so, and then the air is cleaned and dried before it is introduced into the system, ensuring a clean, dry headspace. This control mechanism also prevents premature saturation of the silica gel and extends breather life, a problem not as easily tackled by standard desiccant breathers exposed to extreme moisture. Features By the Numbers 1–Domed Cap A domed cap allows for better washdown runoff. 2–Integrated Nylon Standpipe The integrated standpipe provides excellent vibration resistance and dissipates impact throughout the unit, eliminating weak points. It also allows even airflow distribution throughout the unit, eliminating inaccurate readings of desiccant saturation. 3–External Ribs External ribs on shell to create greater durability and grip when installing or replacing breather. 4–Integrated Drip Ring An integrated drip ring keeps shedding water from entering the vent holes. 5–Threaded Mounting Easily replaces standard filler/breather cap with multi-fit connection or one of several adapters. 6–Larger, High-Capacity Check Valves High-capacity check valves allow for increased airflow at low cracking pressure. 7-Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 8–Enhanced Seal An enhanced seal eliminates potential for airflow bypass. Specifications Unit Height: 3.87 in (98 mm)Unit Diameter: 2.52 in (64 mm)Filter Efficiency: 3μ absolute (β3≥200)Amount of Silica Gel: 0.1 lbs (59 g)Adsorption Capacity: 0.8 fl oz (23 ml)Max. Flow Rate: 1 cfm (41 lpm)Operating Temperature Range: -20°F to 200°F (-29°C to 93°C)Connection Size: 3/8″ Multi-Fit (NPT, BSPP, BSPT)Suction/Return Rate at 1 psid: 11 gpm (41 lpm)Gearbox/Storage Tank Max. Volume: 15 gal (57 L)Hydraulic Reservoir Max. Volume: 2 gal (8 L)Micron Rating: 3 micron TDS -
Des-Case DC-XD-6 Desiccant Breather
Price range: $199.44 through $1,196.64Extreme Duty Breathers The Des-Case Extreme Duty (XD) desiccant breather has excellent vibration and impact resistance, can withstand broad temperature ranges, has expansive chemical compatibility, and features quality check valve technology while still accommodating higher air flow. The Extreme Duty breather also has the best filter efficiency of any Des-Case breather―down to 0.3µ absolute (β0.3≥200). Features By the Numbers 1–Quad Check ValvesCheck-valves provide system pressurization, protecting system integrity and extending product life. 2–Filter ElementePTFE filter removes airborne contamination to 0.3-micron absolute. Stops free water. 3–Water Vapor AdsorbentColor-indicating silica gel adsorbs water from incoming air. Replace when color changes from blue to pink. 4–Filter ElementSecond particulate filter element protects against migration of desiccant. 5–Visual IndicatorWindows on two sides of breather allow for easy monitoring of desiccant. 6–Rugged HousingConstructed from a PC/PBT alloy that maximizes chemical compatibility at the surface and impact resistance at the core. 7–Foam PadFoam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. 8–Integrated StandpipeResilient construction provides durability and allows oil mist to coalesce and drain back into the reservoir. Specifications Unit Height: 6.5 in (165 mm)Unit Diameter: 5.1 in (129.5 mm)Filter Efficiency: 0.3μ absolute (β0.3≥200)Amount of Silica Gel: 1.75 lbs (0.79 kg)Adsorption Capacity: 10.65 fl oz (315 ml)Flow Rate: 16 cfm (456 lpm)Operating Temp. Range: -40°F to 300°F (-40°C to 149°C)Connection Size: 1 1/2″ x 16 UN female threadSuction/Return Rate at 1 psid: 120 gpm (456 lpm)Gearbox/Storage Tank Max. Volume: 500 gal (1893 L)Hydraulic Reservoir Max. Volume: 200 gal (757 L) TDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode Des-Case DC-XD-6W Extreme Duty Breather: How It Protects Harsh-Environment Reservoirs. Or listen on RSS.com. -
Des-Case DC-XDVA-12M Breather Adapter
$111.923/4€³ NPT Vent Valve Adapter for DC-XD-6 Equipment Connection / Port Size: 3/4€³ NPT Male -
Des-Case DC-XDVA-16M Breather Adapter
$111.921€³ NPT Vent Valve Adapter for DC-XD-6 Equipment Connection / Port Size: 1€³ NPT Male -
Des-Case Depth Cellulose Filter Element
Price range: $201.60 through $400.00What is the Depth Cellulose Filter Element?Single piece cellulose depth element, 0.5 micron, Buna seal, for Off-Line Units and By-Pass Units, sold individually. The 2026 book prints each of these twice, once as 30HB / 60HB and once as 9317575 / 9404064, at the same price. They are one element.What is on this listing?30HB, 0.5 micron Buna (also listed as 9317575), 60HB, 0.5 micron Buna (also listed as 9404064). Each is a separate part number in the 2026 price book, quoted and supplied by PE Energy.[PROOF: field observation or a customer application for this part, to be added by PE Energy] -
Des-Case DF02EB1AE00006 Drum Filter Cart
$5,200.912 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler- NPT This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included for complete contamination control. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/ 648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C). Materials Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gasket: Buna-N Filter Indicators Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief Opens at 65psi Weight Approximately 175-250lbs without drum (will vary depending on options selected) Dimensions 30″L x 24.75″W x 57.85″H Features What is Standard Automatic pressure relief valve Dual-stage filtration 12′ hose assemblies with various quick connect options Rugged, powder-coated dolly with plastic removable drip pan Adjustable, heavy-duty straps with spring-loaded clips to secure drum Remote-mounted power switch Casters for easy mobility Mating color-coded drum adapter kit for easy connection One-year warranty What is Customizable Flow rates Filter bypass Sample valves Y-strainer Color Hose-end connection sizes and types Micron rating of filters Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE Filter Cart Guide: How Portable Filtration Extends Gearbox Oil Life. Or listen on RSS.com. -
Des-Case DF05EB1AEB10Y6 Drum Filter Cart
$5,641.615 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler- NPT, manual filter by-pass, standard sample valves, Y-strainer This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included for complete contamination control. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/ 648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C). Materials Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gasket: Buna-N Filter Indicators Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief Opens at 65psi Weight Approximately 175-250lbs without drum (will vary depending on options selected) Dimensions 30″L x 24.75″W x 57.85″H Features What is Standard Automatic pressure relief valve Dual-stage filtration 12′ hose assemblies with various quick connect options Rugged, powder-coated dolly with plastic removable drip pan Adjustable, heavy-duty straps with spring-loaded clips to secure drum Remote-mounted power switch Casters for easy mobility Mating color-coded drum adapter kit for easy connection One-year warranty What is Customizable Flow rates Filter bypass Sample valves Y-strainer Color Hose-end connection sizes and types Micron rating of filters Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE Filter Cart Guide: How Portable Filtration Extends Gearbox Oil Life. Or listen on RSS.com. -
Des-Case DF08AB1AEB10Y6 Drum Filter Cart
$6,290.398 gpm,1.7 hp, 0-3,000 rpm pneumatic motor model with manual filter bypass, sample valves, and Y-strainer This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included for complete contamination control. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/ 648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C). Materials Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gasket: Buna-N Filter Indicators Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief Opens at 65psi Weight Approximately 175-250lbs without drum (will vary depending on options selected) Dimensions 30″L x 24.75″W x 57.85″H Features What is Standard Automatic pressure relief valve Dual-stage filtration 12′ hose assemblies with various quick connect options Rugged, powder-coated dolly with plastic removable drip pan Adjustable, heavy-duty straps with spring-loaded clips to secure drum Remote-mounted power switch Casters for easy mobility Mating color-coded drum adapter kit for easy connection One-year warranty What is Customizable Flow rates Filter bypass Sample valves Y-strainer Color Hose-end connection sizes and types Micron rating of filters Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE Filter Cart Guide: How Portable Filtration Extends Gearbox Oil Life. Or listen on RSS.com. -
Des-Case Dispensing Lid Rebuild Kit
$22.80Dispensing Lid Rebuild Kit: O-ring 568-216, Spring for Lid Spout, .24x1.5 Binding Post W. Screw, 2 Mil x 21 In. Clear Polyfilm, .5 NPT Flanged Black HDPE Plug, O-Ring 349 BunaN 70 Duro, O-Ring 212 BunaN 50 Duro, Recessed Spring Washer, O-Ring-214 BunaN/PTFE 50 Duro, O-Ring-209 BunaN 70 Duro, Dispensing Lid Vent Valve Seat, Dispensing Lid Umbrella Valve -
Des-Case DRA5B3C0620 Drain Port Adapter Kit
$350.98Specifically designed for equipment with limited port locations and serves as a single solution for draining industrial oil. For decades, maintenance personnel have been combining multiple technologies on the drains of their equipment to try to control contamination and effectively remove or replace oil. There’s now a single solution for draining oil from gearboxes, hydraulic reservoirs, totes and other industrial equipment with the Des-Case drain port adapter kit, which functions as the connection between industrial equipment and filtration systems. For decades, maintenance personnel have been combining multiple technologies on the drains of their equipment to try to control contamination and effectively remove or replace oil. There’s now a single solution for draining oil from gearboxes, hydraulic reservoirs, totes and other industrial equipment with the Des-Case drain port adapter kit, which functions as the connection between industrial equipment and filtration systems. The Key Benefits Allows for easy equipment adaptation and quick connection to a filtration system Provides multiple useful components when port locations are limited Allows for customization What Are All the Features? Oil level indicator and vent tube Optional free-standing water sight glass Quick connect plugs Various connection sizes Sample valve TDS -
Des-Case DT01EB1LK002 Drum Topper
$2,945.28Compact, portable and customized for your application, the drum topper is an option you can carry wherever you need to go. Our drum topper provides many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment Handheld Drum Toppers Compact, portable and customized for your application, the drum topper is an option you can carry wherever you need to go. Our drum topper provides many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment You can completely customize your drum topper below. Simply click on the desired options to create your specific drum topper unit. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 10-460 (2000ssu/431cSt) at 100°F/38°C within ambient temperature ranges of -8°F to 104°F (-22°C to 40°C) Materials: Frame: Aluminum Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi (5.49bar) Weight: Approximately 45-55lbs/20.4-24.9Kg (will vary depending on options selected) Dimensions: 24.5″L x 13.5″W x 15.4″H Applications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Topping off reservoirs Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 460 at 100°F/38°C within ambient temperature ranges of -8°F to 104°F (-22°C to 40°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 6 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads Dual-stage filtration 6′ hose assemblies with various quick connect options 25′ power cord (for electric motors only) Industrial powder-coated paint One-year warranty TDS -
Des-Case DT03EB1WL002 Drum Topper
$3,130.603.5 gpm, .25 hp electric motor, 115 vac, 1725 rpms, 5 amps, electric 60 Hz motor base model (for low viscosity oils up to ISO VG 100) with standard features of 1" and 3/4" ISO B quick connects, 6' hoses, manual filter bypass, sample valves and dual-stage filtration Compact, portable and customized for your application, the drum topper is an option you can carry wherever you need to go. Our drum topper provides many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment Handheld Drum Toppers Compact, portable and customized for your application, the drum topper is an option you can carry wherever you need to go. Our drum topper provides many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment You can completely customize your drum topper below. Simply click on the desired options to create your specific drum topper unit. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 10-460 (2000ssu/431cSt) at 100°F/38°C within ambient temperature ranges of -8°F to 104°F (-22°C to 40°C) Materials: Frame: Aluminum Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi (5.49bar) Weight: Approximately 45-55lbs/20.4-24.9Kg (will vary depending on options selected) Dimensions: 24.5″L x 13.5″W x 15.4″H Features Applications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Topping off reservoirs Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 460 at 100°F/38°C within ambient temperature ranges of -8°F to 104°F (-22°C to 40°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 6 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads Dual-stage filtration 6′ hose assemblies with various quick connect options 25′ power cord (for electric motors only) Industrial powder-coated paint One-year warranty TDS -
Des-Case DT08AB1KEB12 Drum Topper
$4,026.058 gpm pump / 1.7 hp air motor, 0-3000 rpms, with standard features of 1" and 3/4" ISO B quick connects, 6' hoses, manual filter bypass, sample valves and dual-stage filtration Compact, portable and customized for your application, the drum topper is an option you can carry wherever you need to go. Our drum topper provides many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment Handheld Drum Toppers Compact, portable and customized for your application, the drum topper is an option you can carry wherever you need to go. Our drum topper provides many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment You can completely customize your drum topper below. Simply click on the desired options to create your specific drum topper unit. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 10-460 (2000ssu/431cSt) at 100°F/38°C within ambient temperature ranges of -8°F to 104°F (-22°C to 40°C) Materials: Frame: Aluminum Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi (5.49bar) Weight: Approximately 45-55lbs/20.4-24.9Kg (will vary depending on options selected) Dimensions: 24.5″L x 13.5″W x 15.4″H Features Applications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Topping off reservoirs Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 460 at 100°F/38°C within ambient temperature ranges of -8°F to 104°F (-22°C to 40°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 6 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads Dual-stage filtration 6′ hose assemblies with various quick connect options 25′ power cord (for electric motors only) Industrial powder-coated paint One-year warranty TDS -
Des-Case Extended Spout Cap 12″ Tether
$6.47Extended Spout Cap 12" Tether -
Des-Case FC02EB1BA00002 Filter Cart
$3,623.352 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler- NPT Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi Weight: Approximately 100-150lbs (will vary depending on options selected) Dimensions: 18.8″L x 21.5″W x 46.4″H Features Applications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Reservoir top-offs Flushing systems Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation Dual-stage filtration 12′ hose assemblies with various quick connect options Pneumatic wheels for easy mobility Industrial powder-coated paint Heavy-duty cart with oil catch pan One-year warranty 25 ft cord (for electric motors only) TDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE Filter Cart Guide: How Portable Filtration Extends Gearbox Oil Life. Or listen on RSS.com. -
Des-Case FC05EB1BAB10Y2 Filter Cart
$4,043.595 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, ISO B Coupler- NPT, manual filter by-pass, standard sample valves, Y-strainer Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi Weight: Approximately 100-150lbs (will vary depending on options selected) Dimensions: 18.8″L x 21.5″W x 46.4″H Features Applications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Reservoir top-offs Flushing systems Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation Dual-stage filtration 12′ hose assemblies with various quick connect options Pneumatic wheels for easy mobility Industrial powder-coated paint Heavy-duty cart with oil catch pan One-year warranty 25 ft cord (for electric motors only) TDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE Filter Cart Guide: How Portable Filtration Extends Gearbox Oil Life. Or listen on RSS.com. -
Des-Case FC08AB1BAB10Y2 Filter Cart
$4,604.008 gpm,1.7 hp, 0-3,000 rpm pneumatic motor model with manual filter bypass, sample valves, and Y-strainer Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi Weight: Approximately 100-150lbs (will vary depending on options selected) Dimensions: 18.8″L x 21.5″W x 46.4″H Features Applications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Reservoir top-offs Flushing systems Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation Dual-stage filtration 12′ hose assemblies with various quick connect options Pneumatic wheels for easy mobility Industrial powder-coated paint Heavy-duty cart with oil catch pan One-year warranty 25 ft cord (for electric motors only) TDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE Filter Cart Guide: How Portable Filtration Extends Gearbox Oil Life. Or listen on RSS.com. -
Des-Case FC10EB1BAB10Y2 Filter Cart
$4,223.7110 gpm pump / 1 hp electric motor, 115 vac, 60 hz, 1725 rpms, 13 amps, manual filter bypass, sample valves, and Y-strainer Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant. Specifications For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO VG 680 (3000ssu/648cSt) at 100°F/38°C within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Materials: Frame: Carbon steel Paint: Industrial powder coat Filter Heads: Aluminum Fittings: Zinc-plated steel and/or brass Pumps: Aluminum/steel Hoses: Clear PVC with steel wire or hydraulic hose Gaskets: Buna-N Filter Indicators: Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced Pump Relief: Opens at 65psi Weight: Approximately 100-150lbs (will vary depending on options selected) Dimensions: 18.8″L x 21.5″W x 46.4″H Features Applications Decontaminating systems Flushing new or repaired systems Dispensing new oil Pre-filtering new oil Evacuating used oil Reservoir top-offs Flushing systems Collecting oil samples for analysis Intended Use To be used for offline, secondary filtration and not inline filtration In general industrial environments, both indoors and outdoors (IP rating of 54) For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C) Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source What is Standard Automatic pressure relief valve Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation Dual-stage filtration 12′ hose assemblies with various quick connect options Pneumatic wheels for easy mobility Industrial powder-coated paint Heavy-duty cart with oil catch pan One-year warranty 25 ft cord (for electric motors only) TDS Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE Filter Cart Guide: How Portable Filtration Extends Gearbox Oil Life. Or listen on RSS.com. -
Des-Case FCV-A Contamination Monitoring Sensor
$271.39Flow Control Assembly for CMS: 0,20 l/min, 1/4”BSP m inlet, M16x2 outlet, HEX body, 14-420 bar. The CMS in-line contamination monitor automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and cost are limited. Formats: ISO 4406:1999, NAS 1638, ES4059E Table 2, AS4059E Table 1, ISO 11218Accuracy: ± 1/2 code for 4, 6, 14 μm (c), ± 1 code for larger sizesCalibration: Each unit individually calibrated with ISO Medium Test Dust (MTD) based on ISO 11171 (1999) on equipment certified by IFTS.Hydraulic Fluid Compatibility: Mineral oil & petroleum based fluids (consult RMF Systems for other fluids)Flow Rate: 20-400 ml/minuteViscosity Range: max. 1000 cStFluid Temperature: -25° C to +80° CMax Working Pressure: 420 barElectrical Supply: Voltage 9 – 36V DCSeal Material: FPM (Viton) – Contact Des-Case regarding any fluids that are incompatible with FPM sealsTest Time: Adjustable 10 – 3600 seconds, factory set to 120 secondsMoisture Sensing: % RH (Relative Humidity) ±3%Temperature Measurement: ±3° CFlow Rate Measurement: Indication onlyData Storage: 4000 testsCommunication Options: RS 485, MODBUS, CANBUS, 4-20 mAAmbient Temperature: -25° C -to +80° C or -25° C to +55° C for K versionIP Rating: IP 65/67 versatile IK04 Impact protectionPhysical Dimensions: 123(H) x 142(W) x 65(D) mmWeight: 1,15 kg Sensors: Water and Temperature Sensor The water sensor option measures water content using a capacitive RH (relative humidity) sensor. The results is expressed as percentage saturation. 100% RH corresponds to the point at which free water exists in the fluid, i.e. the fluid is no longer able to hold the water in a dissolved solution. Software All CMS units are supplied with software to download automatically new results as they are generated, provided the test is done while being directly controlled by the software. Or alternatively historical results can be downloaded form the CMS’s inbuilt memory. The CMS memory has space for around 4000 log entries, when full, the oldest log entry is overwritten. Which test are logged, and when, are determined by the log settingsEach log entry is time-stamped and contains the CMS serial number, so that it can be identified later. Accessories CMS “USB-I” ConnectorThis is a ready-made solution for easily connecting a PC/ Laptop to the CMS. CMS-FC1A pressure compensated flow control valve specifically designed to fit the CMS. This may be needed if the application produces an oil flow greater than 400ml/min. TDS -
Des-Case Filter Cart, Quick Ship
Price range: $6,303.51 through $6,536.31What is the Filter Cart, Quick Ship?Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant. We’re excited to introduce the rollout of our Quick Ship Program for select Des-Case filter carts! These carts are optimized with your most requested key features and options and are ready to ship in 3 DAYS ! Download our flyer to learn more.Which part number do I order?Quick Ship models are the pre-configured builds Des-Case stocks.What is on this listing?FC02EB6CBB20Y2, FC02EB6JBB20Y2, FC05EB6BAB20Y2, FC05EB6JAB20Y2. Each is a separate part number in the 2026 Des-Case price book, quoted and supplied by PE Energy.[PROOF: field observation, install or a customer application for this product, to be added by PE Energy] -
Des-Case GAB104V22 Gearbox Adapter Kit
$273.02Our gearbox adapter keeps water and particulate contamination out of your system during operations and during fluid transfer. Easily connect your gearbox to your filtration system while keeping your lubricants and equipment clean and dry The Key Benefits Allows for easy equipment adaptation and quick connection to a filtration system Prohibits entry of dirt and moisture Allows for customization What Are All the Features? Replaceable breather with colorindicating desiccant Quick connect plugs Single-position vacuum indicator ¾" male NPT connection size Customizable colors TDS -
Des-Case H2O Sorb Water Filter and 12 Micron Element
$253.60What is the H2O Sorb Water Filter and 12 Micron Element?H2O Sorb water filter and 12 micron element, Beta 1000, for the Off-Line Unit with water prefilter. Sold as a single element.What is on this listing?Single element. Each is a separate part number in the 2026 price book, quoted and supplied by PE Energy.[PROOF: field observation or a customer application for this part, to be added by PE Energy] -
Des-Case HAB112124E22 Hydraulic Adapter Kit
$333.56Our hydraulic adapter keeps water and particulate contamination out of your system during operations and during fluid transfer. Easily connect your hydraulics to your filtration system while keeping your lubricants and equipment clean and dry. The Key Benefits Allows for easy equipment adaptation and quick connection to a filtration system Prohibits entry of dirt and moisture Allows for customization What Are All the Features? Replaceable breather with color indicating desiccant Quick connect plugs Single-position vacuum indicator Sample valve 6-hole flange connection size Customizable colors TDS -
Des-Case KL120 Non-Desiccant Breather
$48.98Non-Desiccant Breathers Non Desiccant Air Filter: includes seal, 3 micron microglass spin-on element (also replacement spin-on for ACM, ACL, TDB & KL) Specifications Dimension/ Measurements: 15.39" x 5.12" ±100 x 130 mmConnection: 1 1/4" BSP FemaleMicron Rating: 3 micron Featured in our podcast Hear how this product solves real-world reliability problems in our episode DES-CASE TDB Series Desiccant Breathers: How ZR Gel and 3 µm Filtration Protect Hydraulic Systems. Or listen on RSS.com. -
Des-Case KL1201 Breather Mounting Plate
$138.94Mounting plate for series 121 & 122 Breather Connection Size: 1-1/4" BSPP Female Equipment Connection Size: 6-Bolt Circular Mounting (Ø 2.9") -
Des-Case KL1202 Breather Mounting Plate
$61.75Mounting plate for series 121 & 122 Breather Connection Size: 1-1/4" BSPP FemaleEquipment Connection Size: 6-Bolt Circular Mounting (Ø 2.9") -
Des-Case KL1205 Breather Mounting Plate
$98.56Mounting plate for series 121 & 122 Breather Connection Size: 1-1/4" BSPP Female Equipment Connection Size: 6-Bolt Circular Mounting (Ø 2.9") -
Des-Case KL121R Desiccant Breather
$279.08KL Series Breathers The RMF Systems KL desiccant breathers are built around a steel standpipe making them well suited for vibration and harsh environments. This series is fully serviceable and has optional check valves that prevent premature saturation of the silica gel and extend breather life. The spin on filter cap also provides a high dirt holding capacity. Applications Hydraulics Mobile & off-road equipment Truck differentials Nautical applications Features  By the Numbers 1. Spin-On Filter CapA spin-on filter cap provides increased dirt holding capacity and removes airborne contamination to 3-micron absolute. 2. Foam PadFoam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. 3. External RibsExternal ribs on shell to create greater durability and grip when installing or replacing breather. 4. Stainless Steel StandpipeStainless steel standpipe provides high vibration resistance and durability. 5. Optional Check ValvesHigh quality check valves that won’t clog or stick are located underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions prolonging breather life and protecting system integrity. 6. Threaded MountingEasily replaces standard filler/breather cap or can be used with one of several adapters. Specifications Model: 121 SeriesFilter Efficiency: 3μ absolute (β3≥200)Amount of ZR Gel: 2.20 lbs (1000 g)Adsorption Capacity: 9.3 fl oz (288 ml)Max. Flow Rate: 53.0 cfm (1500 l/min)Temperature Range: -40°F to 194°F (-40°C to 90°C)Airflow without Check Valves: 53.0 cfm (1500 l/min)Airflow with Check Valves: 14.1 cfm (400 l/min)KL Spin-On: KL120 (9317903)ZR Gel Refill: 1000 cc / RF-1000 (9331157)Spare Kit: RK-121 (9318117)  TDS -
Des-Case KL121RV Desiccant Breather
$297.22KL Series Breathers The RMF Systems KL desiccant breathers are built around a steel standpipe making them well suited for vibration and harsh environments. This series is fully serviceable and has optional check valves that prevent premature saturation of the silica gel and extend breather life. The spin on filter cap also provides a high dirt holding capacity. Applications Hydraulics Mobile & off-road equipment Truck differentials Nautical applications Features  By the Numbers 1. Spin-On Filter CapA spin-on filter cap provides increased dirt holding capacity and removes airborne contamination to 3-micron absolute. 2. Foam PadFoam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. 3. External RibsExternal ribs on shell to create greater durability and grip when installing or replacing breather. 4. Stainless Steel StandpipeStainless steel standpipe provides high vibration resistance and durability. 5. Optional Check ValvesHigh quality check valves that won’t clog or stick are located underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions prolonging breather life and protecting system integrity. 6. Threaded MountingEasily replaces standard filler/breather cap or can be used with one of several adapters. Specifications Model: 121 SeriesFilter Efficiency: 3μ absolute (β3≥200)Amount of ZR Gel: 2.20 lbs (1000 g)Adsorption Capacity: 9.3 fl oz (288 ml)Max. Flow Rate: 53.0 cfm (1500 l/min)Temperature Range: -40°F to 194°F (-40°C to 90°C)Airflow without Check Valves: 53.0 cfm (1500 l/min)Airflow with Check Valves: 14.1 cfm (400 l/min)KL Spin-On: KL120 (9317903)ZR Gel Refill: 1000 cc / RF-1000 (9331157)Spare Kit: RK-121 (9318117)  TDS -
Des-Case KL122R Desiccant Breather
$340.48Refillable breather comes standard with Integrated S.S Standpipe, ZR gel. Breathers with spring loaded check valves end in "V" KL Series Breathers The RMF Systems KL desiccant breathers are built around a steel standpipe making them well suited for vibration and harsh environments. This series is fully serviceable and has optional check valves that prevent premature saturation of the silica gel and extend breather life. The spin on filter cap also provides a high dirt holding capacity. Applications Hydraulics Mobile & off-road equipment Truck differentials Nautical applications Features By the Numbers 1. Spin-On Filter CapA spin-on filter cap provides increased dirt holding capacity and removes airborne contamination to 3-micron absolute. 2. Foam PadFoam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. 3. External RibsExternal ribs on shell to create greater durability and grip when installing or replacing breather. 4. Stainless Steel StandpipeStainless steel standpipe provides high vibration resistance and durability. 5. Optional Check ValvesHigh quality check valves that won’t clog or stick are located underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions prolonging breather life and protecting system integrity. 6. Threaded MountingEasily replaces standard filler/breather cap or can be used with one of several adapters. Specifications Dimension/ Measurements: 15.39" x 5.12" ±391 x 130 mmConnection: 1 1/4" BSP MaleMicron Rating: 3 micron TDS -
Des-Case KL122RV Desiccant Breather
$358.62Refillable breather comes standard with Integrated S.S Standpipe, ZR gel. Breathers with spring loaded check valves end in "V" KL Series Breathers The RMF Systems KL desiccant breathers are built around a steel standpipe making them well suited for vibration and harsh environments. This series is fully serviceable and has optional check valves that prevent premature saturation of the silica gel and extend breather life. The spin on filter cap also provides a high dirt holding capacity. Applications Hydraulics Mobile & off-road equipment Truck differentials Nautical applications Features By the Numbers 1. Spin-On Filter CapA spin-on filter cap provides increased dirt holding capacity and removes airborne contamination to 3-micron absolute. 2. Foam PadFoam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. 3. External RibsExternal ribs on shell to create greater durability and grip when installing or replacing breather. 4. Stainless Steel StandpipeStainless steel standpipe provides high vibration resistance and durability. 5. Optional Check ValvesHigh quality check valves that won’t clog or stick are located underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions prolonging breather life and protecting system integrity. 6. Threaded MountingEasily replaces standard filler/breather cap or can be used with one of several adapters. Specifications Dimension/ Measurements: 15.39" x 5.12" ±391 x 130 mmConnection: 1 1/4" BSP MaleMicron Rating: 3 micron TDS -
Des-Case KL60 Non-Desiccant Breather
$27.49Non-Desiccant Breathers Non Desiccant Air Filter: includes seal, 3 micron microglass spin-on element (also replacement spin-on for ACM, ACL, TDB & KL) Specifications Dimension/ Measurements: 5.31" x 2.68" ±60 x 68 mmConnection: M20 x 1.5 FemaleMicron Rating: 3 micron TDS -
Des-Case KL75 Breather Tank Adapter
$268.67Barrel adapter for 93 & 96 series Breather Connection Size: 3/4" BSPP FemaleEquipment Connection Size: 2" BSPP Male -
Des-Case KL90 Non-Desiccant Breather
$35.16Non-Desiccant Breathers Non Desiccant Air Filter: includes seal, 3 micron microglass spin-on element (also replacement spin-on for ACM, ACL, TDB & KL) Specifications Dimension/ Measurements: 5.91" x 3.78" ±60 x 96 mmConnection: 3/4" BSP FemaleMicron Rating: 3 micronTDS -
Des-Case KL91 Breather Mounting Plate
$88.61Mounting plate for 93 & 96 series Breather Connection Size: 3/4" BSPP FemaleEquipment Connection Size: 6-Bolt Circular Mounting (Ø 2.9") -
Des-Case KL91SR Breather Mounting Plate
$152.00Mounting plate for 93 & 96 series Breather Connection Size: 3/4" BSPP Female Equipment Connection Size: 6-Bolt Circular Mounting (Ø 2.9") -
Des-Case KL92 Breather Mounting Plate
$51.80Mounting plate for 93 & 96 series Breather Connection Size: 3/4" BSPP FemaleEquipment Connection Size: 6-Bolt Circular Mounting (Ø 2.9")