Bestolife

STINGER® HDD-ALL SEASON is a copper-based drilling compound for use in all HDD drilling applications. It is especially effective in lower temperature environments but has the versatility to be used year-round. STINGER® HDD-ALL SEASON is designed to provide galling and seizing protection and support for high bearing stress on HDD pipe joints. NSF H2 registered.** APPLICATIONS Recommended for use on HDD drill pipe and developed for rugged conditions. Low temperature field application is enhanced through the use of a premium quality, low temperature base grease, making it an outstanding choice for environments reaching below 0ºF. Can be brushed on threads or applied via most automated lubrication systems. TECHNICAL DATA Finely powdered copper, graphite and special non metallic additives absorb stresses and enhance performance properties Friction Factor (Torque Correction Factor) of 1.0 Resistant to wash-out and will not harden or bleed excessively in storage ALL SEASON formula allows for easier application in lower temperatures Superb protection against seizing and galling PRODUCT CHARACTERISTICS Color: Copper Penetration: (ASTM D217) 310-340 NLGI Grade: 1 Weight/Gallon: 10.2 pounds/gallon Thickener: Calcium Fluid Type: Petroleum Dropping Point: (ASTM D2265) ≥300°F (≥149°C) Flash Point: ≥325°F (≥162.8°C) Brushable To: -40°F (-40°C) Service Rating: 400°F (204°C) Friction Factor: 1.0* Shelf Life: (Unopened container) 4 years Contains: Copper, graphite, and other non metallic additives Container Size: 1 gallon Container Weight: 10 pounds plastic Safety Data Sheet Technical Data Sheet

BESTOLIFE® 3000® was the first totally nonmetal drilling compound, formulated to address environmental concerns as well as the costs of thread compounds with high percentages of heavy metals. The formulation contains a variety of amorphous and synthetic graphite-based materials that combine to make a gasket-like seal to prevent connection washout even under high internal fluid pressures. The use of premium quality, high temperature based grease enhances its performance. APPLICATIONS Non metallic compound for rotary-shouldered connections. It is also effective for use on open gear jack-up legs. TECHNICAL DATA BESTOLIFE® 3000® has been formulated to address environmental concerns. The first totally non-metallic thread compound for rotary-shouldered connections, protects from high stresses, loads, downhole temperatures and internal pressures. Contains a premium quality high temperature base grease plus antiwear and oxidation inhibitors. This compound has a low environmental impact, along with a high level of extreme pressure performance without containing any heavy metal compounds. PRODUCT CHARACTERISTICS Color: Black Penetration: (ASTM D217) 310-340 NLGI Grade: 1 Weight/Gallon: 10.2 pounds/gallon Thickener: Lithium Complex Fluid Type: Petroleum Dropping Point: (ASTM D2265) ≥500°F (≥260°C) Flash Point: ≥392°F (≥200°C) Brushable To: 15°F (-9°C) Service Rating: 600°F (316°C) Friction Factor: 1.0* Shelf Life: (Unopened container) 4 years Contains: Amorphous and synthetic graphite and other nonmetallic additives Container Size: 3 1/2 gallon Container Weight: 35 pounds plastic Safety Data Sheet Technical Data Sheet

BESTOLIFE® 3010® Ultra is a non metallic thread compound for rotary-shouldered connections and is effective for jack up systems. Heavy metal free for environmental concerns, the compound excels in low temperature and high temperature environments. 3010® Ultra prevents galling and seizing, forming a gasket-like seal in a rotary connection for maximum protection in rough conditions. APPLICATIONS Non metallic, non conductive compound for rotary shouldered connections in cold, wet conditions. Recommended for all drilling applications including high temperature environments. TECHNICAL DATA Like compounds that contain lead, zinc, and copper, 3010® Ultra has the ability to prevent galling of contact surfaces (including non-magnetic materials) under high bearing loads and to form a continuous gasket between the shoulders of a rotary connection during make-up. This is achieved through the innovative combination of a variety of amorphous and synthetic graphite based materials, as first used in 3000®, interacting to form a seal when compressed between the shoulders during makeup to provide performance properties equal to the very best heavy metal compounds. Meets the current OSPAR Commission Harmonised Mandatory Control Scheme (HOCNF) regulations for the protection of the marine environment of the North-East Atlantic/North Sea. Registered in the UK/Netherlands as an OCNS Group E Chemical and in Norway as a Colour Category Yellow Pipe Dope. Registered in the Danish Produktregistret with PRNo. (Product Registration Number) 1367040. Contains biodegradable greases and synthetic lubricating fluids NOTES A safety data sheet is available from the manufacturer. Do not use on oxygen lines or in oxygen enriched atmospheres. PRODUCT CHARACTERISTICS Color: Black Penetration: (ASTM D217) 295-310 NLGI Grade: 1.5 Weight/Gallon: 10.4 pounds/gallon Thickener: Calcium Fluid Type: Synthetic Dropping Point: (ASTM D2265) ≥300°F (≥149°C) Flash Point: >310°F (>154°C) Brushable To: -49°F (-45°C) Service Rating: (grease/solids) 400°F (204°C)/1000°F (538°C) Friction Factor: 1.0* Shelf Life: (Unopened container) 4 years Contains: Amorphous and synthetic graphite and other non metallic additives Container Size: 5 gallon Container Weight: 50 pounds plastic Safety Data Sheet Technical Data Sheet

STINGER® Water Well is a copper-based drilling compound designed for exceptional performance. It is especially effective in lower temperature environments but has the versatility to be used year-round. STINGER® Water Well is designed to provide galling and seizing protection on water well drill pipe and drill collars. NSF H2 registered.* APPLICATIONS Recommended for use on water well drill pipe. Low temperature field application is enhanced through the use of premium quality, low temperature base grease, making it an outstanding choice for environments reaching below 0°F. TECHNICAL DATA • Finely powdered copper, graphite and special non metallic additives absorb stresses and enhance performance properties • ALL SEASON formula allows for easier application in lower temperatures • Premium thread protection • Resistant to wash-off and will not harden or bleed excessively in storage PRODUCT CHARACTERISTICS Color: Copper Penetration: (ASTM D217) 310-340 NLGI Grade: 1 Weight/Gallon: 10.2 pounds/gallon Thickener: Calcium Fluid Type: Petroleum Dropping Point: (ASTM D2265) ≥300°F (≥149°C) Flash Point: ≥325°F (≥162.8°C) Brushable To: -40°F (-40°C) Service Rating: 400°F (204°C) Shelf Life: (Unopened container) 4 years Contains: Copper, graphite, and other non metallic additives Container Size: 3.5 Gallon Container Weight: 25 lb Plastic Safety Data Sheet Technical Data Sheet

BESTOLIFE® 4010® NM is the fourth generation of the BESTOLIFE® family of non metallic thread compounds for rotary-shouldered and premium connections, designed and developed to address environmental concerns in ecologically sensitive areas of the world. APPLICATIONS Non metallic compound for rotary connections and proprietary premium self sealing casing/tubing connections. Effective for use on slides, jacking systems, cantilever type rigs and assemblies. Salt Spray Corrosion Protection for up to 1500 hours. 4010® NM is non conductive and resistant to high pH/brine water. TECHNICAL DATA BESTOLIFE® 4010® NM is the fourth generation of the highly successful BESTOLIFE® family of compounds designed with biodegradable greases and synthetic lubricating fluids, developed to address the environmental concerns related to the use of thread compounds for rotary-shouldered and premium connections, in ecologically sensitive areas of the world such as the North Sea, Nova Scotia, Newfoundland, the South Atlantic, Alaska, and Sakhalin Island. BESTOLIFE® 4010® NM combines the excellent low-temperature application properties of BESTOLIFE® 3010® Ultra with superior downhole galling resistance and enhanced eco-toxicological properties to provide the ideal drill string solution for all rotary-shouldered (drill pipe/tool joints/drill collars) and many proprietary premium self-sealing casing/tubing connection applications, irrespective of offshore drilling location. Applies easily to cold, wet connections exposed to seawater in ambient temperatures as low as -40ºF/-40ºC and yet provides optimum protection in the deepest, hottest holes. Will provide lubrication and protection to 600º F/316º C and the solids will protect to 1,000ºF/538º C. Has the ability to prevent galling of contact surfaces (including non-magnetic materials) under high bearing loads and to form a continuous gasket between the shoulders of a rotary connection during makeup. This is achieved through the innovative combination of graphite and other non-toxic materials, which interact to form a seal when compressed between seals, threads, and shoulders during makeup to provide performance properties that are equal to the very best heavy metal compounds. This gasket-like seal prevents connection washout, even under high internal fluid pressures and the combined loading of directional drilling, to provide maximum protection in the toughest conditions. Meets the performance requirements of many proprietary metal-to-metal seal casing/tubing and high interference connection designs in Carbon Steel, 13 Cr., Super-Chrome and Duplex Steels. Contains biodegradable greases and synthetic lubricating fluids Approved running compound for VAM® connections. For more details, recommendations per type of connection, material and conditions of use, please refer to the VAM® recommended compound chart: http://www.vamservices. com/library/files/Table of Running Compounds.pdf or liaise with your nearest VAM® contact. Conforms with API RP 5A3. Provides superior protection for the threaded connections of OCTG’s during transit and long term storage. Meets the current OSPAR Commission Harmonised Mandatory Control Scheme (HOCNF) regulations for the protection of the marine environment of the North-East Atlantic/North Sea. Registered in 2008 for use in the UK/Netherlands as an OCNS Group E Clemical and in Norway as a Colour Category Yellow Pipe Dope. Registered in the Danish Produktregistret with PRNo. (Product Registration Number) 2068624. NOTES A safety data sheet is available from the manufacturer. Do not use on oxygen lines or in oxygen enriched atmospheres. PRODUCT CHARACTERISTICS Color: Light Gray Penetration: (ASTM D217) 295-310 NLGI Grade: 1.5 Weight/Gallon: 10.4 pounds/gallon Thickener: Calcium Complex Fluid Type: Synthetic Dropping Point: (ASTM D2265) ≥550°F (≥288°C) Flash Point: 396°F (202°C) Brushable To: -40°F (-40°C) Service Rating: (grease/solids) 600°F (316°C)/1000°F (538°C) Friction Factor: 1.0* Salt Spray: 1500 Hours Shelf Life: (Unopened container) 4 years Contains: Graphite and other nonmetallic additives Container Size: 3 1/2 gallon Container Weight: 30 pounds plastic Safety Data Sheet Technical Data Sheet

HONEY KOTE® from BESTOLIFE® is the superior choice when maximum protection against seizing, galling, and load-bearing stress is critical. Specially formulated to resist washout and corrosion while providing ultimate efficiency in higher temperature environments. Also provides long-term storage protection for threaded surfaces in a variety of conditions! NSF H2 registered.** APPLICATIONS HONEY KOTE® is a non-lead, non-zinc compound for drill collars and drill pipe. Recommended for all drilling applications (rotary-shouldered connections), including high temperature environments. HONEY KOTE® is also effective for use as long-term storage protection for threaded surfaces. TECHNICAL DATA Grease base with excellent water resistance and inherent extreme pressure protection Superb protection against seizing and galling at more than 54k ft/lbs on NC50 tool joints Average break out torque ratio: 89% of makeup Successfully pressure tested up to 25,000 psi Contains inhibitors to protect against rust and corrosion BESTOLIFE® HONEY KOTE® meets or exceeds the listed performance objectives in API RP 5A3. Resistant to high pH/brine water PRODUCT CHARACTERISTICS Color: Copper Penetration: (ASTM D217) 320-340 NLGI Grade: 1 Weight/Gallon: 11 pounds/gallon Thickener: Complex Fluid Type: Petroleum Dropping Point: (ASTM D2265) ≥500°F (≥260°C) Flash Point: ≥392°F (≥200°C) Brushable To: 0°F (-18°C) Service Rating: 600°F (316°C) Friction Factor: 1.2* Salt Spray Test: (ASTM B117) 2,500 hours Shelf Life: (Unopened Container) 4 years Contains: Copper, graphite and other nonmetallic additives Container Size: 5 gallon Container Weight: 50 pounds metal INT'L PRODUCT NUMBER CONTAINER SIZE CONTAINER WEIGHT 659004 5 gallon 50 pounds metal IMDG 659005 5 gallon 50 pounds metal IATA 659006 5 gallon 50 pounds plastic IMDG 659007 5 gallon 50 pounds plastic IATA   Safety Data Sheet Technical Data Sheet

Non-lead thread compound for fiberglass pipe NOTE: 1 gallon: 10 pounds plastic container weight 2 gallon: 20 pounds plastic container weight

BESTOLIFE® 2000® is a lead-free, zinc-free thread compound for casing, tubing, and line pipe. It is stable in high-pressure and high-temperature conditions. An excellent running compound, 2000® also provides superior protection for long-term storage. APPLICATIONS Premium lead-free API alternative for casing, tubing, and line pipe; contains no lead or zinc. Formulated for use in high temp steam injection service. TECHNICAL DATA BESTOLIFE® 2000® will meet or exceed the listed performance objectives in API RP 5A3. The major solid components are a proprietary blend of nonmetallic materials that are inert to chemical attack, such as occurs in sour gas environments and with CO2 injection. Contains a high-quality lubricating base grease formulated with H2S and oxidation inhibitors. BESTOLIFE® 2000® also addresses one of the major concerns in pipe yards and threading operations today: rejects due to pitting and corrosion. In a salt fog spray test, 2000® demonstrated corrosion protection that exceeds the performance of the leading storage compound in the industry. BESTOLIFE® 2000® conforms to API RP 5A3 evaporation, gas evolution, oil separation, water leaching, copper corrosion and cold application at 19.4°F (-7°C) requirements. PRODUCT CHARACTERISTICS Color: Dark Copper Penetration: (ASTM D217) 310 - 340 NLGI Grade: 1 Weight/Gallon: 10.4 pounds/gallon Thickener: Lithium Fluid Type: Petroleum Particle Size: <450 microns Dropping Point: (ASTM D2265) ≥350°F (≥177°C) Flash Point: ≥392°F (≥200°C) Brushable To: 10°F (-12°C) Service Rating: 500°F (260°C) Friction Factor: .9* Salt Spray Test: (ASTM B117) 1,250 hours Shelf Life: (Unopened container) 4 years Contains: PTFE, other inert nonmetallic solids and <4% copper flake Container Size: 1 gallon Container Weight: 9 pounds plastic Safety Data Sheet Technical Data Sheet

BESTOLIFE® 2000® is a lead-free, zinc-free thread compound for casing, tubing, and line pipe. It is stable in high-pressure and high-temperature conditions. An excellent running compound, 2000® also provides superior protection for long-term storage. APPLICATIONS Premium lead-free API alternative for casing, tubing, and line pipe; contains no lead or zinc. Formulated for use in high temp steam injection service. TECHNICAL DATA BESTOLIFE® 2000® will meet or exceed the listed performance objectives in API RP 5A3. The major solid components are a proprietary blend of nonmetallic materials that are inert to chemical attack, such as occurs in sour gas environments and with CO2 injection. Contains a high-quality lubricating base grease formulated with H2S and oxidation inhibitors. BESTOLIFE® 2000® also addresses one of the major concerns in pipe yards and threading operations today: rejects due to pitting and corrosion. In a salt fog spray test, 2000® demonstrated corrosion protection that exceeds the performance of the leading storage compound in the industry. BESTOLIFE® 2000® conforms to API RP 5A3 evaporation, gas evolution, oil separation, water leaching, copper corrosion and cold application at 19.4°F (-7°C) requirements. PRODUCT CHARACTERISTICS Color: Dark Copper Penetration: (ASTM D217) 310 - 340 NLGI Grade: 1 Weight/Gallon: 10.4 pounds/gallon Thickener: Lithium Fluid Type: Petroleum Particle Size: <450 microns Dropping Point: (ASTM D2265) ≥350°F (≥177°C) Flash Point: ≥392°F (≥200°C) Brushable To: 10°F (-12°C) Service Rating: 500°F (260°C) Friction Factor: .9* Salt Spray Test: (ASTM B117) 1,250 hours Shelf Life: (Unopened container) 4 years Contains: PTFE, other inert nonmetallic solids and <4% copper flake Container Size: 5 gallon Container Weight: 45 pounds plastic   INT'L PRODUCT NUMBER CONTAINER SIZE CONTAINER WEIGHT 615042 5 gallon 45 pounds plastic IMDG 615043 5 gallon 45 pounds metal IMDG 615069 5 gallon 45 pounds plastic IATA   Safety Data Sheet Technical Data Sheet

BESTOLIFE® Copper Supreme Special Blend® Plus (CSSB Plus) adds a proprietary corrosion inhibitor to the original CSSB formula, providing excellent storage protection in addition to its superior running capabilities. CSSB Plus guards against corrosion, resists washout, and will not harden or bleed excessively in storage. APPLICATIONS High temperature compound for drill collars and drill pipe with storage protection. Recommended for all drilling applications (rotary-shouldered connections), including high temperature environments. It is also effective for use on slides, jacking systems, cantilever type rigs and assemblies. TECHNICAL DATA CSSB Plus contains copper flake combined with a proprietary blend of amorphous and synthetic graphite, oxidation, corrosion, and H2S inhibitors, in a high temperature base grease. API and IADC tables for drill collars and drill pipe are minimum torque values. BESTOLIFE® recommends applying the friction factor to the optimum makeup torque to ensure maximum performance and protection when using BESTOLIFE® copper compounds. PRODUCT CHARACTERISTICS Color: Copper Penetration: (ASTM D217) 310-330 NLGI Grade: 1 Weight/Gallon: 10.2 pounds/gallon Thickener: Lithium Complex Dropping Point: (ASTM D2265) ≥500°F (≥260°C) Flash Point: 399°F (204°C) Brushable To: 15°F (-9°C) Service Rating: 600°F (316°C) Friction Factor: 1.15* Salt Spray Test: (ASTM B117) ≥2500 Hours Shelf Life: (Unopened container) 4 years Contains: Copper flake, synthetic and amorphous graphite and other nonmetallic additives Container Size: 3 1/2 gallon Container Weight: 30 pounds plastic INT'L PRODUCT NUMBER CONTAINER SIZE CONTAINER WEIGHT 635019 3 1/2 gallon 30 pounds metal IMDG   Safety Data Sheet Technical Data Sheet

BESTOLIFE® Copper Supreme Special Blend® Plus (CSSB Plus) adds a proprietary corrosion inhibitor to the original CSSB formula, providing excellent storage protection in addition to its superior running capabilities. CSSB Plus guards against corrosion, resists washout, and will not harden or bleed excessively in storage. APPLICATIONS High temperature compound for drill collars and drill pipe with storage protection. Recommended for all drilling applications (rotary-shouldered connections), including high temperature environments. It is also effective for use on slides, jacking systems, cantilever type rigs and assemblies. TECHNICAL DATA CSSB Plus contains copper flake combined with a proprietary blend of amorphous and synthetic graphite, oxidation, corrosion, and H2S inhibitors, in a high temperature base grease. API and IADC tables for drill collars and drill pipe are minimum torque values. BESTOLIFE® recommends applying the friction factor to the optimum makeup torque to ensure maximum performance and protection when using BESTOLIFE® copper compounds. PRODUCT CHARACTERISTICS Color: Copper Penetration: (ASTM D217) 310-330 NLGI Grade: 1 Weight/Gallon: 10.2 pounds/gallon Thickener: Lithium Complex Dropping Point: (ASTM D2265) ≥500°F (≥260°C) Flash Point: 399°F (204°C) Brushable To: 15°F (-9°C) Service Rating: 600°F (316°C) Friction Factor: 1.15* Salt Spray Test: (ASTM B117) ≥2500 Hours Shelf Life: (Unopened container) 4 years Contains: Copper flake, synthetic and amorphous graphite and other nonmetallic additives Container Size: 3 1/2 gallon Container Weight: 30 pounds plastic INT'L PRODUCT NUMBER CONTAINER SIZE CONTAINER WEIGHT 635084 5 gallon 50 pounds plastic IMDG 635085 5 gallon 50 pounds metal IMDG 635091 5 gallon 50 pounds plastic IATA   Safety Data Sheet Technical Data Sheet

Industrial Compound - Copper Based BESTOLIFE Supr Copr is a lead-free, zinc-free compound for high temperature applications; it provides galling and seizure resistance to temperatures in excess of 600°F. Supr Copr can also be used for rotary-shouldered connections and premium self-sealing tubing and casing in high temperature environments. It is available in small containers with brush-top lids. APPLICATIONS Copper-based compound for deep and shallow wells; free of lead and graphite. Recommended for drill collars, tool joints, all rotary-shouldered connections, tubing and fishing tools. Suited for use on all threaded and flanged connections, studs, bolts and screws in high temperature environments. PRODUCT CHARACTERISTICS Color: Copper Penetration: 310-330 (ASTM D 217) Weight/Gallon: 10.7 pounds/gallon Dropping Point: ≥500°F/≥260°C (typ) Flash Point: >392°F/>200°C (min) Brushable To: 15°F/-9°C Friction Factor: 1.2 (per API RP 7A1) Contains: 14% Copper flake, synthetic graphite, and other nonmetallic additives NOTE: 1/2 pint: 1/2lb (12/case) container weight 1 pint: 1lb (12/case) container weight 1 quart: 2lb (6/case) container weight 1 gallon: 8lb plastic container weight 2 gallon: 20lb plastic container weight 5 gallon: 40lb plastic container weight