3M
Showing 901–945 of 962 results
-
8523178 – 3M DBI-SALA Concrete Parapet Anchor, 1 ea
-
8530252 – 3M DBI-SALA Confined Space Pole Hoist System
-
8530253 – 3M DBI-SALA Confined Space Pole Hoist System
-
8530267 – 3M DBI-SALA SecuraSpan Fasten-in-Place HLL Bolt-on Floor Base, 1 ea
Maximize mobility, productivity and fall protection Versatility counts At 3M DBI-SALA we get that flexibility promotes productivity on the job. That's why we designed our 3M™ DBI-SALA® Temporary Cable Horizontal Lifeline fall protection systems to be modular and customizable. This bolt-on vertical base allows you and your team to achieve a secure anchorage point for a post that allows you to transform a single-span system into a multi-span system. Easy setup Designed for fasten-in-place systems for vertical concrete structures or steel beams, this clamp-on base is simple to install and includes a mounting kit. Made from zinc-plated steel, this base is durable to stand up to the rigors of the job site allowing the system to be left in place for longer periods of time. Reliable fall protection 3M™ DBI-SALA® Horizontal Lifeline systems are precision-engineered and tested to meet OSHA regulations to help ensure that you and your team are protected on the job, day in and day out. Recommended industries Construction General Industrial Oil & Gas Utilities SecuraSpan™ Extremely lightweight and portable, the SecuraSpan™ temporary horizontal lifeline system keeps your crew safe and agile, so they can get the job done with confidence. Each system incorporates a modular, multi-base design that accommodates a wide range of steel and concrete beams. Spans can reach up to 60 ft. (18.3 m) and total system length can be configured to run indefinitely for ultimate jobsite flexibility. Temporary Horizontal Lifelines These temporary safety systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Our broad selection of horizontal lifelines offers significant advantages in safety and productivity and have been precision engineered for specific applications, including connection point, connection type and number of users, and rigorously tested to meet industry standards. Permanent Horizontal Lifelines Our permanent horizontal lifeline (HLL) solutions are designed to work for your worksite, providing continuous fall protection without conflicting with other safety systems. They are available pre-engineered or customized based on your application needs. Elevating safety to new heights With its history of innovation and excellence, 3M Personal Safety Division offers its customers the quality products, expertise and service of the trusted 3M™ DBI-SALA® and 3M™ Protecta® Fall Protection brands. With 3M Fall Protection equipment, you can help elevate your employees' safety and comfort to new heights. Anchorages A secure point of attachment. Anchorage connectors vary by industry, job, type of installation and structure. They must be able to support the intended loads and provide a sufficient factor of safety for fall arrest. Body support Harnesses distribute fall forces over the upper thighs, pelvis, chest and shoulders. They provide a connection point on the worker for the personal fall arrest system. Connectors Self-retracting lifelines or shock-absorbing lanyards connect a worker's harness to the anchorage. Descent and rescue devices Used to raise or lower a fallen injured worker to safety or retrieve him from a confined space. Education We offer a variety of training and consultative services to fit your needs. Fall protection for tools Helps make work environments safer and more productive by reducing dropped object incidents. Details Highlights Bolt-on base for horizontal surfaces provides anchorage point for horizontal lifeline post Ideal for fasten-in-place system on horizontal steel and concrete structures Simple attachment with four fasteners (not included) Heavy-duty portable design Durable steel construction for strength and longevity Various lengths and individual components are available 3M™ DBI-SALA® Temporary Cable Horizontal Fasten-in-Place HLL Base is a bolt-on horizontal base for fasten-in-place post horizontal lifeline systems (fasteners not included). A fully engineered horizontal lifeline system designed to provide an overhead tie off point, complete efficient mobility and unrivaled ease of use. Whether your need is for a system that installs to concrete column tops, clamps to an i beam on a pipe rack or is welded to a transmission substation, this system can be configured with different bases to provide your fall protection solution. 3M offers the broadest selection, as well as significant advantages in safety and productivity. A horizontal lifeline may appear to be a basic line strung between two anchors, but it is not. It is critical to choose a system that has been precision engineered and rigorously tested to meet regulations. These systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped No For Use With 3M™ DBI-SALA® SecuraSpan™ Pour-in-Place/Fasten-in-Place HLL system Install Type Temporary/Portable Lifeline Material Order separately Maximum Number of Workers 2 Per Span, 6 Total Net Weight (Imperial) 75 lb Net Weight (Metric) 34 kg Product Series SecuraSpan™ Fasten-in-Place, SecuraSpan™ Pour/Fasten-in-Place Product Type Fasten-in-Place HLL Bolt-on Floor Base Recommended Industry Construction, General Industrial, Oil & Gas, Utilities Span Type Single or Multi-Span Weight (Imperial) 60 lb. Weight (Metric) 27 kg Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 141 kg -
8530288 – 3M DBI-SALA Flexiguard Box-Frame Rail Adjustable Height Anchor System, 2 User, 12 – 18 ft High, 12 ft Wide
Details Highlights Secure fall protection with intuitive pin-height selection system. The system can be adjusted using an overhead crane, forklift or other powered system Solid rubber wheels available Accessories available to suit worksite needs including optional tow bar Recommended for numerous applications within the transportation, construction, utilities, and mining industries Provides an overhead sliding anchor point for one, two or more personnel, maximum one person per trolley Aluminum and steel construction Conforms to OSHA 1926.502 and OSHA 1910.66 requirements Fixed and Adjustable height systems Requires clearance over equipment being accessed Overhead anchoring can improve at-height work safety; an effective fall arrest system The 3M™ DBI-SALA® FlexiGuard™ Box Frame System provides a means of securing a fall arrest rigid rail in areas with limited or inadequate overhead structure. These frames are built to accommodate a specific area or piece of equipment. These units can be designed as permanent or portable frames, allowing for relocation. The FlexiGuard™ Box Frame System provides a convenient means of securing a fall arrest rigid rail in areas with limited space or inadequate overhead structure. These frames are built to accommodate a specific area or piece of equipment. These units can be designed as permanent or portable frames, allowing for ease of relocation. These systems are ANSI and OSHA compliant. DBI SALA® has created a proven process for developing unique solutions. Whether it’s an existing or modified product, or an entirely new design, FlexiGuard™ always meets the requirements of your specific application. Each custom solution is driven by our customers’ needs and is dependent on the industry, environment and specific design constraints, including government standards. We also have numerous pre engineered systems that may be a perfect solution to your fall protection challenge. All of our systems are extremely durable and built to last with world class quality, materials and workmanship. They are unique solutions to unique challenges, and fall protection you can trust. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped Yes Install Type Temporary/Portable Maximum Height (Imperial) 19.27 ft Maximum Height (Metric) 5.87 m Maximum Number of Users Two Product Color Silver, Yellow Product Series FlexiGuard™ Product Type Adjustable Height Box Frame System Recommended Industry Construction, Mining, Transportation, Utilities Specifications Met ANSI Z359.6, OSHA 1926.502 Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 420 lb. Weight Capacity (Metric) 190 kg Overall Width (Imperial) 23.28 ft Overall Width (Metric) 7.06 m -
8530352 – 3M DBI-SALA Confined Space 4-in-1 Davit Guard System, 1 EA
Details Highlights Integrated 5,000 lb. (22 kN) mast anchorage point The 3-way SRL with emergency retrieval or winch attach easily to mounting bracket Adjustable leveling system Built-in handrail system with hinged gate Telescoping upper davit mast Fall arrest rated in all davit offset mast positions Built-in secondary fall arrest anchor point Set up and dismantle without tools Recommended for use in all industries Built in pulley for 3-way SRL with emergency retrieval or winch Folding base and handrail Corrosion-resistant construction Built-in guardrail system with hinged gate The 3M™ DBI-SALA® Confined Space 4-in-1 Davit Guard System has what workers need to complete their davit system. The davit guard system features a lightweight, folding base and guardrail with a hinged gate and comes equipped with a built-in pulley for use with a self-retracting lifeline. With a unique foot level and height adjustment system, safety pros can easily access various heights and adjust the guardrail system for uneven terrain. The confined space 4 in 1 Davit Guard system provides a basic hoist and a passive restraint guardrail system protecting companion workers and bystanders. It offers ample room for worker entry and maneuvering while keeping the confined space opening secure. The basic hoist is the most efficient and economical confined space entry/retrieval alternative to a tripod. This lightweight aluminum structure assembles and adjusts without tools. It features a collapsible base to reduce storage and transport space. A standard tie off point provides a convenient 5000 lb. (22 kN) anchor point for fall arrest devices where required. All hardware is zinc plated for corrosion resistance. When it comes to confined space entry/rescue, it is essential that equipment operates perfectly and quickly. DBI SALA® has an extensive line of rescue and retrieval systems with decades of proven field service. Safety engineers and site directors trust DBI SALA® for the type of high quality, rugged systems that will ensure top performance when it is needed the most. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped No Install Type Portable Net Weight (Imperial) 125 lb Net Weight (Metric) 56.7 kg Product Color Green Product Type 4-in-1 Davit Guard System Recommended Industry Construction, General Industrial, Mining, Oil & Gas, Transportation, Utilities, Wind Energy Weight (Imperial) 125 lb. Weight Capacity Personnel = 310 lbs. (140 kg), Materials = 620 lbs. (281 kg) -
8530373 – 3M DBI-SALA Temporary Fasten-In-Place Horizontal Lifeline Clamp-On Vertical Base For Concrete/Steel
Details Highlights Bolt-on base for horizontal surfaces provides anchorage point for horizontal lifeline post Ideal for fasten-in-place system on horizontal steel and concrete structures Simple attachment with four fasteners (not included) Heavy-duty portable design Durable steel construction for strength and longevity Various lengths and individual components are available 3M™ DBI-SALA® Temporary Cable Horizontal Fasten-in-Place HLL Base is a bolt-on horizontal base for fasten-in-place post horizontal lifeline systems (fasteners not included). SecuraSpan™ is a fully engineered horizontal lifeline system designed to provide an overhead tie off point, complete hands free mobility and unrivaled ease of use. Whether your need is for a system that installs to concrete column tops, clamps to an i beam on a pipe rack or is welded to a transmission substation, this system can be configured with different bases to provide your fall protection solution. You can always depend on our horizontal safety systems for mobility and fall protection when working at height. That’s why safety engineers and site directors choose DBI SALA® horizontal lifelines. We offer the broadest selection, as well as significant advantages in safety and productivity. A horizontal lifeline may appear to be a basic line strung between two anchors, but it is not. It is critical to choose a system that has been precision engineered and rigorously tested to meet regulations. These systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped No Install Type Temporary/Portable Lifeline Material Order separately Maximum Number of Workers 2 Per Span, 6 Total Product Series SecuraSpan™ Pour/Fasten-in-Place Product Type Fasten-in-Place HLL Clamp-on Vertical Base, Lifeline/Component Recommended Industry Construction, General Industrial, Oil & Gas, Utilities Span Type Single or Multi-Span Weight (Imperial) 85 lb. Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 141 kg -
8530397 – 3M DBI-SALA Flexiguard Supported Ladder Rail Fixed Height Access Anchor System, 2 User, 9 ft High, 3 ft Wide
Details Highlights 9 ft. (2.7 m) platform height provides optimal access for transportation vehicle maintenance Non-slip working platform helps keep personnel on their feet One part of your personal fall arrest system; intended for use with personal protective equipment (PPE) including (but not limited to) harnesses and self retracting lifelines 9 ft. (2.7 m) platform length provides ample maneuvering space for 1-2 workers 8 in. (20 cm) urethane wheels allow the system to be moved between jobs Suitable for numerous applications within the transportation industry 12 ft. (3.7 m) fall arrest rail and trolley system for active fall protection Conforms to the requirements of OSHA 1926.502 and OSHA 1910.66 3M™ DBI-SALA® FlexiGuard™ Supported Ladder System provides workers with both passive and active fall protection capability. This safety system features guardrails that surround the work platform for passive protection and a fall arrest rail above to provide for active fall protection when needed. Worry-free fall protection Safety management professionals can rest easy with this system on site; the 3M™ DBI-SALA® FlexiGuard™ Supported Ladder System provides both active and passive fall protection for up to two individuals. No fuss or need to adjust Sometimes just one size is all you need for a perfect, streamlined application; the 3M™ DBI-SALA® FlexiGuard™ Supported Ladder System was designed to the specifications of work on transportation vehicles in a variety of environments and conditions. Workers will not have to pause for vertical or horizontal adjustments while utilizing this sophisticated piece of fall protection equipment. Secure anchoring wherever the job takes you The 3M™ DBI-SALA® FlexiGuard™ Solutions are designed to be versatile, lightweight, and exceptionally mobile to ensure workers' safety in a variety of challenging conditions. Our pre-engineered personal fall arrest systems provide secure anchor points and spacious, safe working areas to help personnel focus on the task at hand while working at heights. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped Yes Install Type Temporary/Portable Maximum Number of Users Two Product Color Silver, Yellow Product Series FlexiGuard™ Product Type Supported Ladder System Recommended Industry Transportation Specifications Met OSHA 1926.502 Weight (Imperial) 2206 lb. Weight Capacity 310 lbs. (141 kg) -
8530433 – 3M DBI-SALA FlexiGuard Counterweight Jib
Details Highlights Counterweighted Jib fall arrest system Portable with use of a forklift Available in multiple sizes, both fixed and adjustable heights Aluminum and steel construction Includes four steel leveling jacks; built-in slope indicators available as option One part of your fall protection system; intended for use with other personal protective equipment (PPE) including (but not limited to) harnesses and self-retracting lifelines Complete hardware provided Recommended for a variety of applications within the transportation, construction, utilities, and mining industries Specialized installation and training available 3M™ DBI-SALA® FlexiGuard™ Counterweighted Jib with 20 ft. (6.1m) offset, anchor height determined by user. The FlexiGuard™ Counterweighted Jib is a portable solution for indoor and outdoor maintenance where mobility and worker safety are key. These systems incorporate a 360° rotating jib with the capacity to provide fall protection for one person. Forklift pockets are strategically located on all four sides of the base to ensure ease of mobility and placement from job site to job site. The base also contains four heavy duty lifting rings for transport by a crane. These systems are ANSI and OSHA compliant. DBI SALA® has created a proven process for developing unique solutions. Whether it’s an existing or modified product, or an entirely new design, FlexiGuard™ always meets the requirements of your specific application. Each custom solution is driven by our customers’ needs and is dependent on the industry, environment and specific design constraints, including government standards. We also have numerous pre engineered systems that may be a perfect solution to your fall protection challenge. All of our systems are extremely durable and built to last with world class quality, materials and workmanship. They are unique solutions to unique challenges, and fall protection you can trust. Typical properties Brands 3M™ Case Quantity 1 Connected Safety ID Equipped Yes Install Type Temporary/Portable Maximum Height (Imperial) 20 ft Maximum Height (Metric) 6.1 m Maximum Number of Users One Product Color Yellow Product Series FlexiGuard™ Product Type Counterweight Jib Recommended Industry Construction, Mining, Transportation, Utilities Specifications Met ANSI Z359.6, OSHA 1926.502 Weight (Imperial) 380 lb. Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 140.6 kg -
8530563 – 3M DBI-SALA Flexiguard Jib Counterweight Base Stabilizing Jack Kit 8530563, Yellow
Details Highlights Counterweighted overhead rail fall protection system Portable with use of a forklift Available in multiple sizes, both fixed and adjustable heights Aluminum and steel construction Includes four steel leveling jacks; built-in slope indicators available as option One part of your fall protection system; intended for use with other personal protective equipment (PPE) including (but not limited to) harnesses and self-retracting lifelines Complete hardware provided Recommended for a variety of applications within the transportation, construction, utilities, and mining industries Specialized installation and training available 3M™ DBI-SALA® FlexiGuard™ Counterweight Base Jack Leveling Kit is designed to fit our concrete-filled jib base for portable anchorage applications with FlexiGuard™ systems (among others). This kit arrives with all of the hardware you need for a successful installation and four leveling legs for precise adjustment on uneven surfaces. Because no two jobs are the same Our portable fall arrest systems allow you to ensure your team's fall protection challenges are covered wherever the work is—but what about over uneven ground? Many access systems require a flat, even surface for a successful installation, so we created the 3M™ DBI-SALA® FlexiGuard™ Counterweight Base Jack Leveling Kit. This kit that allows you to lift the base from beneath its four corners to achieve the necessary stable, flat conditions. Easily moved with the right powered system A safety system that incorporates the 3M™ DBI-SALA® FlexiGuard™ Counterweight Base can be easily moved using a pallet jack, forklift, reach forklift, or other powered system. The base also features four heavy-duty lifting rings for transport with a crane. Secure anchoring wherever the job takes you The DBI-SALA® FlexiGuard™ Solutions are designed to be versatile, lightweight, and exceptionally mobile to ensure workers' safety in a variety of challenging conditions. Our pre-engineered personal fall arrest systems provide secure anchor points and spacious, safe working areas to help personnel focus on the task at hand while working at heights. Typical properties Brands FlexiGuard™ Case Quantity 1 Connected Safety ID Equipped No Dimensions (12.50x8.00x9.50)in Install Type Permanent Maximum Number of Users One Product Color Yellow Zinc Product Series FlexiGuard™ Product Type Counterweight Base Jack Leveling Kit Recommended Industry Construction, General Industrial, Mining, Transportation, Utilities Specifications Met OSHA Weight Capacity 7,000 lbs. (3,175 kg) -
8530566 – 3M DBI-SALA Flexiguard Jib Counterweight Base with Concrete, Yellow, 5000 lb
Details Highlights Counterweighted overhead rail fall protection system Portable with use of a forklift Available in multiple sizes, both fixed and adjustable heights Aluminum and steel construction Includes four steel leveling jacks; built-in slope indicators available as option One part of your fall protection system; intended for use with other personal protective equipment (PPE) including (but not limited to) harnesses and self-retracting lifelines Complete hardware provided Recommended for a variety of applications within the transportation, construction, utilities, and mining industries Specialized installation and training available 3M™ DBI-SALA® FlexiGuard™ Jib Base System is designed as a portable solution to provide an overhead anchor point for up to two users while working at heights. These systems are designed to be counterbalanced by concrete or other means, allowing for close positioning to the work surface without obstructing the equipment being accessed. These systems conform to ANSI and OSHA requirements. Each solution is driven by our customers’ needs and is dependent on the industry, environment, and specific design constraints, including government standards. 3M's pre-engineered systems may be an ideal solution to your fall protection challenge. DBI-SALA® FlexiGuard™ Solutions are designed to be versatile and mobile safety systems to help protect workers from the perils of at-height work in a variety of conditions. The 3M™ DBI-SALA® FlexiGuard™ safety systems can be moved from job to job using forklift pockets on the base. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped No Install Type Temporary/Portable Maximum Number of Users One Net Weight (Imperial) 5000 lb Net Weight (Metric) 2268 kg Product Color Yellow Zinc Product Series FlexiGuard™ Product Type Jib Base - Counterweight Recommended Industry Construction, General Industrial, Mining, Transportation, Utilities Specifications Met OSHA Weight Capacity 420 lbs. (190 kg) -
8530690 – 3M DBI-SALA Flexiguard Trailer Mounted Adjustable Height Anchor System, 2 User, Yellow, 12.75 – 20.5 ft
Details Highlights Utilizes integrated counterweight to provide a stand alone solution Rated for off-road use only Suitable for numerous applications within the transportation, construction, utilities, and mining industries Two shock-absorbing arms overhead anchroages provide secure anchoring for up to two users One part of your personal fall protection system; intended for use with personal protective equipment including (but not limited to) harnesses and self-retracting lifelines Steel Leveling Jacks capacity of 7,000 lb. (3,175 kg) Anchor is height-adjustable from 10 ft.–21.5 ft. (3.0 m–6.6 m) with a 4.5 ft. (1.4 m) offset Conforms to the requirements of OSHA 1926.502 and OSHA 1910.140 The 3M™ DBI-SALA® FlexiGuard™ Trailer Mount System features an integrated counterweight system and secure anchorage points for one or two users working with an anchor height up to 20.5 ft (6.25 m). This safety system can be attached to a hitch receiver on a truck or other service vehicle for mobility between jobsites. Moves into position easily and stays put Attach the 3M™ DBI-SALA® FlexiGuard™ Trailer Mount System to your truck or other service vehicle using a Class III hitch for total mobility on the worksite. Once the system is in place, deploying the heavy-duty stabilizing jacks ensures there's no rocking, tipping, or other hazardous movement during use. Get the height right An integrated winch and handle allow this overhead anchorage system to be easily raised or lowered, helping your team meet the task at hand as well as regulation clearance requirements. Secure anchoring wherever the job takes you The 3M™ DBI-SALA® FlexiGuard™ Solutions are designed to be versatile, lightweight, and exceptionally mobile to ensure workers' safety in a variety of challenging conditions. Our pre-engineered systems provide secure anchor points and spacious, safe working areas to help personnel focus on the task at hand while working at heights. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped No Install Type Temporary/Portable Maximum Number of Users Two Net Weight (Imperial) 4570 lb Net Weight (Metric) 2072.9 kg Product Color Silver Product Series FlexiGuard™ Product Type Trailer Mount System Recommended Industry Construction, Mining, Transportation, Utilities Specifications Met ANSI Z359.6, OSHA 1926.502, OSHA 1926.502 (d)(15) Weight (Imperial) 4570 lb. Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 450 lb. Weight Capacity (Metric) 140 kg Overall Height (Imperial) 252.5 in Overall Height (Metric) 641.35 cm -
8530777 – 3M DBI-SALA Flexiguard Counterweight Base Hoist Ring Kit, 5000 lb, 4 ea/Pack
Details Highlights Enables M200 counterweight box to be moved with overhead lifting equipment Designed to enable easy system transport Improves system mobility to help maximize usage in various locations The 3M™ DBI-SALA® Flexiguard™ Modular Jib System is comprised of a modular set of components that when properly configured constitute a unique overhead anchorage system. The 3M™ DBI-SALA® FlexiGuard™ M200 Lifting Ring Kit can be attached to M200 counterweight base boxes, and enable boxes to be moved using overhead lifting equipment. The 3M™ DBI SALA® Flexiguard™ Modular Jib System is a collection of modular components that can be configured in a multitude of ways to create highly portable and highly configurable overhead anchorage solutions. A combinantion of base and mast assemblies can be interchanged with a variety of accessories to custom tailor a solution for a specific application or environment. Significant measures were taken to create a design that maximized portability via a wide variety of transport methods. Many adjustable mast height options are paired with a variety of cantilever distances and user capacity ratings to meet unique and dynamic customer requirements. Typical properties Brands DBI-SALA® Connected Safety ID Equipped No Install Type Temporary/Portable Manufacturing Origin USA Maximum Height (Imperial) 6.36 in Maximum Height (Metric) 16.15 cm Minimum Height (Imperial) 6.36 in Minimum Height (Metric) 16.15 cm Net Weight (Imperial) 10.2 lb Net Weight (Metric) 4.62 kg Product Series M100 & M200 Product Type M100 & M200 Accessory Recommended Industry Mining System Type Lifting Ring Kit Weight (Metric) 4.92 kg Overall Height (Metric) 0 mm Overall Length (Metric) 0 mm Overall Width (Metric) 0 mm -
8530873 – 3M DBI-SALA Flexiguard M100 Modular Jib Outrigger Base
Details Highlights Powder coated steel upright and gusset components Automatic mast lock helps prevent uncontrolled mast movement Permanent and portable mounted designs available 3M™ Safety-Walk™ Slip Resistant walking surface (counterweight Bases) Extended rail-length increases safe working area compared to our previous jib systems Aluminum extruded trolley rail with stainless steel / nylon trolley construction Power assisted height adjustment capability for adjustable models Additional system mobility with optional caster wheel kit Extended anchor height enhances capabilities in various applications compared to our previous jib systems Rotating mast up to 360 degrees with Flip up rotation handle Leveling jacks standard on the M100 with integrated fork pockets for transporting and positioning using industrial forklifts The 3M™ DBI-SALA® Flexiguard™ Modular Jib System is comprised of a modular set of components that when properly configured constitute a unique overhead anchorage system. The 3M™ DBI-SALA® FlexiGuard™ M100 Portable Outrigger Bases is built with a powder coated steel, and utilizes a free-standing / self-supporting design. The integrated drive-over outriggers enables optimal positioning next to large vehicles. The 3M™ DBI SALA® Flexiguard™ Modular Jib System is a collection of modular components that can be configured in a multitude of ways to create highly portable and highly configurable overhead anchorage solutions. A combinantion of base and mast assemblies can be interchanged with a variety of accessories to custom tailor a solution for a specific application or environment. Significant measures were taken to create a design that maximized portability via a wide variety of transport methods. Many adjustable mast height options are paired with a variety of cantilever distances and user capacity ratings to meet unique and dynamic customer requirements. Typical properties Brands DBI-SALA® Connected Safety ID Equipped No Install Type Temporary/Portable Manufacturing Origin USA Maximum Height (Imperial) 4.1 ft Maximum Height (Metric) 1.3 m Maximum Number of Users One Minimum Height (Imperial) 4.1 ft Minimum Height (Metric) 1.3 m Mounting Type Surface Net Weight (Imperial) 1335 lb Net Weight (Metric) 605.55 kg Product Series FlexiGuard™ Product Type Portable Jib Base Recommended Industry Mining System Type Portable Outrigger Bases Weight (Metric) 0 kg Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 141 kg Overall Height (Metric) 0 mm Overall Length (Metric) 1100.0 mm Overall Width (Metric) 457.0 mm -
8530885 – 3M DBI-SALA Flexiguard M100 Modular Jib Rescue Mount and Pulley Kit, Black
Details Highlights Enables a rescue device to be mounted to the system Includes mounting brackets Includes re-direct pulleys The 3M™ DBI-SALA® Flexiguard™ Modular Jib System is comprised of a modular set of components that when properly configured constitute a unique overhead anchorage system. The 3M™ DBI-SALA® FlexiGuard™ M100 Rescue Mount and Pulley Kit contains the hardware necessary to mount a rescue/retrival device to the jib. This enables the jib to perform rescue operations, and/or be used in confined space entry & retrieval applications. The 3M™ DBI SALA® Flexiguard™ Modular Jib System is a collection of modular components that can be configured in a multitude of ways to create highly portable and highly configurable overhead anchorage solutions. A combinantion of base and mast assemblies can be interchanged with a variety of accessories to custom tailor a solution for a specific application or environment. Significant measures were taken to create a design that maximized portability via a wide variety of transport methods. Many adjustable mast height options are paired with a variety of cantilever distances and user capacity ratings to meet unique and dynamic customer requirements. Typical properties Brands DBI-SALA® Connected Safety ID Equipped No Install Type Temporary/Portable Maximum Number of Users One Net Weight (Imperial) 27 lb Net Weight (Metric) 12.25 kg Product Series FlexiGuard™, M100 Product Type Modular Jib Accessory Recommended Industry Construction, General Industrial, Mining, Transportation, Utilities System Type Rescue Mount and Pulley Kit Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 141 kg -
8530905 – 3M DBI-SALA Flexiguard M100 Modular Jib Rescue Mount and Pulley Kit, Black
-
8530907 – 3M DBI-SALA FlexiGuard M200 Jack Stabilizing, 1 Kit
Details Highlights Designed to stabilize and level counterweight base systems Removable for ease of transport and storage Recommended with M200 counterweight base systems The 3M™ DBI-SALA® Flexiguard™ Modular Jib System is comprised of a modular set of components that when properly configured constitute a unique overhead anchorage system. The 3M™ DBI-SALA® FlexiGuard™ M200 Jack Stabilizing Kit help to ensure M200 counterweight base systems can be leveled and stablized on slightly uneven terrain. The 3M™ DBI SALA® Flexiguard™ Modular Jib System is a collection of modular components that can be configured in a multitude of ways to create highly portable and highly configurable overhead anchorage solutions. A combinantion of base and mast assemblies can be interchanged with a variety of accessories to custom tailor a solution for a specific application or environment. Significant measures were taken to create a design that maximized portability via a wide variety of transport methods. Many adjustable mast height options are paired with a variety of cantilever distances and user capacity ratings to meet unique and dynamic customer requirements. Typical properties Brands DBI-SALA® Connected Safety ID Equipped No Install Type Temporary/Portable Manufacturing Origin Mexico Mounting Type Surface Net Weight (Imperial) 108 lb Net Weight (Metric) 48.99 kg Product Series M200 Product Type Modular Jib Accessory Recommended Industry Construction System Type Jack Stabilizing Kit Weight (Metric) 48.99 kg Overall Height (Metric) 0 mm Overall Length (Metric) 0 mm Overall Width (Metric) 0 mm -
8530908 – 3M DBI-SALA Flexiguard M100 & M200 Modular Jib Smooth Surface Leveling Caster Assembly
Details Highlights Kit comes with 4 wheel assemblies and required fasteners Designed to enable system transport Helps maximize usage in various locations The 3M™ DBI-SALA® Flexiguard™ Modular Jib System is comprised of a modular set of components that when properly configured constitute a versatile overhead anchorage system. The 3M™ DBI-SALA® FlexiGuard™ Surface Caster Kit provides an alternative means to move M100/M200 systems when maneuvering into tight spaces on smooth surfaces. The 3M™ DBI SALA® Flexiguard™ Modular Jib System is a collection of modular components that can provide portable and configurable overhead anchorage solutions. A combination of base and mast assemblies can be interchanged with a variety of accessories for a specific application or environment. Significant measures were taken to create a design that maximized portability via a wide variety of transport methods. Many adjustable mast height options are paired with a variety of cantilever distances and user capacity ratings to meet customer requirements. Typical properties Brands DBI-SALA® Connected Safety ID Equipped No Install Type Temporary/Portable Manufacturing Origin Mexico Mounting Type Surface Net Weight (Imperial) 152 lb Net Weight (Metric) 68.95 kg Product Series FlexiGuard™ Product Type Modular Jib Accessory Recommended Industry Transportation System Type Surface Caster Kit Weight (Metric) 100 kg Overall Height (Metric) 1050 mm Overall Length (Metric) 1200 mm Overall Width (Metric) 90 mm -
8530911 – 3M DBI-SALA Flexiguard M100 Modular Jib Fork Pocket Kit
Details Highlights Enables mast to be separated from the base and transported vertically using a forklift Designed to enable easy system transport Helps maximize usage in various locations The 3M™ DBI-SALA® FlexiGuard™ M100 Forklift Pocket Mast Transport Kit is designed to assist system transport. This kit allows the mast to be separated from the base and transported vertically using a forklift. The 3M™ DBI SALA® Flexiguard™ Modular Jib System is a collection of modular components that can provide portable and configurable overhead anchorage solutions. A combination of base and mast assemblies can be interchanged with a variety of accessories for a specific application or environment. Significant measures were taken to create a design that maximized portability via a wide variety of transport methods. Many adjustable mast height options are paired with a variety of cantilever distances and user capacity ratings to meet customer requirements. The M100 mast forklift transport kit was designed to assist system transport by enabling the mast to be separated from the base and moved vertically with a forklift. Typical properties Brands DBI-SALA® Connected Safety ID Equipped No Install Type Temporary/Portable Manufacturing Origin USA Net Weight (Imperial) 70 lb Net Weight (Metric) 32 kg Product Series FlexiGuard™ Product Type Modular Jib Accessory Recommended Industry Construction System Type Mast Forklift Transport Kit Weight (Metric) 27 kg Overall Height (Metric) 220 mm Overall Length (Metric) 650 mm Overall Width (Metric) 34 mm -
8530912 – 3M DBI-SALA FlexiGuard M200 Adjustable Upright Fork Pocket Kit
Details Highlights Enables mast to be separated from the base and transported vertically using a forklift Designed to enable system transport Helps maximize usage in various locations The 3M™ DBI-SALA® Flexiguard™ Modular Jib System is comprised of a modular set of components that when properly configured constitute a versatile overhead anchorage system. The 3M™ DBI-SALA® FlexiGuard™ M200 Mast Forklift Transport Kit was designed to assist system transport by enabling the mast to be separated from the base and moved vertically with a forklift. The 3M™ DBI SALA® Flexiguard™ Modular Jib System is a collection of modular components that can provide portable and configurable overhead anchorage solutions. A combination of base and mast assemblies can be interchanged with a variety of accessories for a specific application or environment. Significant measures were taken to create a design that maximized portability via a wide variety of transport methods. Many adjustable mast height options are paired with a variety of cantilever distances and user capacity ratings to meet customer requirements. The M200 mast forklift transport kit was designed to assist system transport by enabling the mast to be separated from the base and moved vertically with a forklift. Typical properties Brands DBI-SALA® Connected Safety ID Equipped No Install Type Temporary/Portable Manufacturing Origin USA Net Weight (Imperial) 70 lb Net Weight (Metric) 32 kg Product Series M200 Product Type Modular Jib Accessory Recommended Industry Transportation System Type Mast Forklift Transport Kit Weight (Metric) 29.03 kg Overall Height (Metric) 0 mm Overall Length (Metric) 0 mm Overall Width (Metric) 0 mm -
8530914 – 3M DBI-SALA Flexiguard Counterweight Base Hoist Ring Kit, 5000 lb, 4 ea/Pack
Details Highlights Enables system counterweight box to be moved with overhead lifting equipment Designed to enable system transport Helps maximize usage in various locations 3M™ DBI-SALA® Flexiguard™ Modular Jib System is comprised of a modular set of components that when properly configured constitute a unique overhead anchorage system. The 3M™ DBI-SALA® FlexiGuard™ M100 Lifting Ring Kit can be attached to M100 counterweight base boxes and enable boxes to be moved using overhead lifting equipment. The 3M™ DBI SALA® Flexiguard™ Modular Jib System is a collection of modular components that provide portable and configurable overhead anchorage solutions. A combination of base and mast assemblies can be interchanged with a variety of accessories for a specific application or environment. Significant measures were taken to create a design that maximized portability via a wide variety of transport methods. Many adjustable mast height options are paired with a variety of cantilever distances and user capacity ratings to meet customer requirements. The M100 lifting ring kit can be attached to M100 counterweight base boxes, and enable boxes to be moved using overhead lifting equipment. Typical properties Brands DBI-SALA® Connected Safety ID Equipped No Install Type Temporary/Portable Manufacturing Origin USA Maximum Height (Imperial) 6.36 in Maximum Height (Metric) 16.15 cm Minimum Height (Imperial) 6.36 in Minimum Height (Metric) 16.15 cm Net Weight (Imperial) 5.1 lb Net Weight (Metric) 2.31 kg Product Series M100 Product Type Modular Jib Accessory Recommended Industry Transportation System Type Lifting Ring Kit Weight (Metric) 4.08 kg Overall Height (Metric) 0 mm Overall Length (Metric) 0 mm Overall Width (Metric) 0 mm -
8549915 – 3M DBI-SALA Confined Space Winch/Self-Retracting Lifeline Mounting Bracket For Davit Mast
Details Highlights Spare Parts Disc Spring Stainless Steel Built-in handle and label access pockets Designed to fit all DBI-SALA Sealed-Blok™ Retrieval SRL models Locking pin and mounting bolts included Service and repair parts for Self-retracting lifelines (SRL) featuring internal braking systems help to ensure unit passes compentent person inspections. Common repair parts for SRLs include: pawl, pawl spring, motor spring, brake, housings, drum, labels, lifeline assemblies and miscellaneous components. When it comes to confined space entry/rescue, it is essential that equipment operates perfectly and quickly. Lightweight, portable Protecta® aluminum tripods are ideal for confined space manhole entry and retrieval. They’re easily transported from one location to another and can be set-up by one worker. Attach one or two mechanical devices such as a winch or 3-way self retracting lifeline and you’re ready to go. Our tripods are loaded with features such as locking legs, simple detent pin style adjustment, quick-mount mechanical device bracket, safety chain to prevent movement and skid resistant tread plate soles on feet. Typical properties For Use With Digital Winch Product Type Mounting Bracket -
8560409 – 3M DBI-SALA Confined Space Portable Extendable Pole Hoist, Stainless Steel Hardware, 4 ft – 7 ft
-
8560476 – 3M DBI-SALA Confined Space Portable Extendable Pole Hoist 8560476, Stainless Steel Hardware, 6 ft – 10 ft
-
8561235 – 3M DBI-SALA Confined Space Portable Extendable Pole Hoist T-Bar Leg Assembly, Stainless Steel Hardware
-
8567422 – 3M DBI-SALA Permanent Weld-On Uni-Anchor with Tie-Off Fall Arrest Post Base, Sandblasted Steel, 10 in x 8 in CE
-
8700225 – 3M™ DBI-SALA® Rope Carrying Bag, PVC Vinyl, Yellow, 8 in x 7.5 in x 25 in
-
8800023 – 3M DBI-SALA Portable Tandem Pulley Anchor Fits 3/8 – 1/2 in Rope/Cable
Details Highlights Portable Pylon Anchor is ideal for anchoring the 3M™ Rollgliss™ descender system Portable design is easily moved by hand Quick and easy installation Use on a variety of surfaces for added flexibility This safety equipment is designed for use with additional personal protective equipment Durable and corrosion resistant construction System does not require special tools or equipment to install Twenty individual 45 lb. (20 kg) counterweights included 3M DBI-SALA Portable Anchor counterweight type with 45 lb (20 kg) weights 3M's anchorage connectors are built from quality materials providing high strength and durability to stand up to tough environments. Anchorage connectors are the foundation of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor. -
8900298 – 3M™ DBI-SALA® Rollgliss™ Rescue Pole, Silver and Red, 4 ft. to 16 ft. (1.2 to 4.9 m)
-
8900299 – 3M™ DBI-SALA® Rescue Pole, Black, 1 EA
-
9501207 – 3M™ DBI-SALA® Comfort Shoulder/Back Pad For Harness, Universal
-
9501215 – 3M™ Hex Head Cap Screw, Stainless Steel, 1/2 in-13 x 3 in
-
9501264 – 3M DBI-SALA Cell Phone Holder Pouch For Harness, Hook and Loop
Details Highlights Compatible with 3M™ DBI-SALA® and Protecta® Fall Protection systems and components Enable workers to secure tools and accessories while working at height Multiple materials, closure systems, and attachment point options designed for a variety of applications 3M™ DBI-SALA® Fall Protection for Tools Buckets and Pouches are designed with functional features to enable workers to secure tools and accessories while working at height. We offer a variety of accessory items that will work with you, making your job easier, more productive and safe. Our accessories for attachment to a harness range from suspension trauma straps to tool pouches, comfort padding, hydrations systems and tool lanyard to name just a few. We also offer various carrying and storage bags to store and transport your fall protection equipment. When it comes to an accessory, it is essential the equipment operates perfectly in combination with the other parts of the system. Safety engineers and site directors trust DBI SALA® for the type of high quality, rugged systems that will ensure top performance when it is needed the most. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped No Dimensions 76.00x150.00x25.00mm Net Weight (Imperial) 0.1 lb Net Weight (Metric) 0.04 kg Product Color Blue Product Type Cell Phone Holder Pouch Recommended Industry Construction, General Industrial, Oil & Gas, Transportation, Utilities, Wind Energy Weight (Imperial) 0.1 lb. Weight Capacity None eClass 14 Classification Group 15310100 -
9501683 – 3M Unthreaded Anchorage Ring, Zinc Plated Steel, 13 mm
-
9502006 – 3M™ DBI-SALA® Comfort Shoulder Pad For Harness, Hook and Loop
-
9502058 – 3M Double Locking Rebar Snap Hook, Aluminum, 3600 lb Gate, 2 1/4 in Throat
-
9502116 – 3M Double Locking Snap Hook 3600 lb Gate, 0.75 in Throat
Details Highlights Corrosion resistant plated steel hardware Compact design Recommended for use in multiple industries including construction, oil and gas, and utilities High strength construction with 3,600 lb (16kN) rated gate Designed to allow horizontal movement along the anchorage, but does not include capability to pass intersecting structures Meets the requirements for 29 CFR OSHA 1910.140, 29 CFR OSHA 1926.502 Double action and locking gate for added safety Compatible with various fall arrest systems 3M™ DBI-SALA® Double Action Snap Hook is corrosion resistant plated steel hardware When it comes to your crew’s fall protection equipment, 3M™ DBI-SALA® and Protecta® Snap Hooks and Carabiners help make installation quick and easy. Simply squeeze the handles to open the “jaws” and slide the grip over anchorage and you’re ready to attach your fall arrest system to get to work. Protecting your workers and elevating their comfort and safety is the number one priority for 3M Fall Protection. These hand grips are built with the quality and function your crew requires. 3M's anchoring safety equipment combines ease and strength. The anchorage connectors are built from quality materials providing high strength and durability to stand up to the harsher environments. Wherever the job takes you, 3M has safety equipment to create a fall protection system that addresses a variety of job demands. These solutions are designed to help keep you and your crew protected. Typical properties Attachment Type Hook, None Brands Advanced™ Carabiner/Hook Material Zinc Plated Steel Case Quantity 1 Connected Safety ID Equipped No Dimensions 110.00x73.00xmm Install Type None, Reusable Product Type Double action snap hook Recommended Industry Construction, General Industrial, Oil & Gas, Transportation, Utilities, Wind Energy Specifications Met AS/NZS 1891, AS/NZS 1891.1, EN362 Weight (Imperial) 356 g -
9502195 – 3M™ Double Locking Swiveling Snap Hook, Zinc Plated Steel, 3600 lb Gate, 0.75 in Throat
-
9503094 – 3M™ DBI-SALA® Confined Space Carrying Bag for 7 ft Aluminum Tripod KK0RM3094
-
9503095 – 3M™ DBI-SALA® Confined Space Carrying Bag for 9 ft. Aluminum Tripod
-
9503317 – 3M Quick Release Locking Detent Pin, 5/16 in x 3.7 in
-
9503806 – 3M™ DBI-SALA® Equipment Carrying and Storage Bag, 10.5 in x 12 in x 19.5 in
-
9504733 – 3M DBI-SALA Aluminum Rope Pulley for Rollgliss
Details Highlights Hardware kit for sloped high speed Rollgliss™ Descender Designed to be compact and lightweight 11.2 lb. (5.1 kg) Suspension bars connect descender to guide cable Corrosion-resistant steel construction Braking trolley with snap hook for more control during descent Recommended for use in construction, oil and gas, and general industrial applications 3M™ DBI-SALA® Rescue & Descent accessories are designed for use with a variety of rescue and descent devices for the safe extractions of personnel during emergency situations. Strength and durability High-speed descender hardware kit consists of two suspension bars, a secure snap hook, and braking trolley made of corrosion-resistant steel. Weather repellent and ready for repeat use, this tool kit promises high performance in all conditions and emergency situations. Sloped, high-speed rescue When workers need extraction from dangerous situations, sometimes it takes more than a straight vertical rescue. Built to equip the 3M™ DBI-SALA® Rollgliss™ High Speed Auto-Retracting Descender, this safety equipment hardware allows for sloped extraction when challenging angles and obstructions are present—and when time is of the essence. Secure connection A pair of steel suspension bars connects to the descender unit so it can attach securely to the guide cable, ensuring there are no accidents or injuries on the way down. The steel snap hook is placed at the end of the guide cable for a tight tether to a personal safety harness D-ring. Typical properties Brands DBI-SALA® For Use With Rescue & Descent Devices Product Series Rollgliss™ Product Type Pulley -
9505504 – 3M DBI-SALA ExoFit NEX Lumbar Wear Pads For Wind Energy Harness Belt, Small/Medium
Details Highlights Replaceable lumbar protector Fits ExoFit NEX™ wind energy harness belt - Small or Medium Size Protects web from damage during climb Durable nylon construction Compact and lightweight design Lumbar wear pads for Small or Medium ExoFit™ NEX wind energy harness belt. We offer a variety of accessory items that will work with you, making your job easier, more productive and safe. Our accessories for attachment to a harness range from suspension trauma straps to tool pouches, comfort padding, hydrations systems and tool lanyard to name just a few. We also offer various carrying and storage bags to store and transport your fall protection equipment. When it comes to an accessory, it is essential the equipment operates perfectly in combination with the other parts of the system. Safety engineers and site directors trust DBI SALA® for the type of high quality, rugged systems that will ensure top performance when it is needed the most. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped No For Use With ExoFit NEX™ Wind Energy Harness Net Weight (Imperial) 0.3 lb Net Weight (Metric) 0.1 kg Product Color Blue Product Series ExoFit NEX™ Product Type Lumbar Wear Pads for Wind Energy Harness Recommended Industry Construction, General Industrial, Oil & Gas, Transportation, Wind Energy Weight (Imperial) 0.3 lb. Weight Capacity None -
9506162 – 3M™ DBI-SALA® Equipment Carrying/Storage Bag, 9 in x 9 in x 30 in