Lubricants
Showing 316–360 of 2922 results
-
50341 – JET-LUBE WHITE LITHIUM GREASE 13 oz aerosol
$17.48All-Purpose Grease w/ PTFE - H2 Jet-Lube WHITE LITHIUM GREASE is a premium all-purpose grease that provides superior performance and protection. WHITE LITHIUM GREASE with PTFE penetrates and forms a long lasting protective film that will withstand heavy loads and will not run or wash away. Benefits of using White Lithium Grease Has a dropping point of >425°F Highly water-resistant Rust & corrosion inhibitors Pumpable High strength fluid film High lithium soap content >10% Pumpable Fortified with PTFE anti-wear additives Timken load - 45 lbs. Specifications of 50341 JET-LUBE WHITE LITHIUM GREASE 13 oz aerosol Base Materials: Lithium / Petroleum Oils Certifications: CFIA listed, NSF Registered H2 Bulk - Reg. #137549 Aerosol - Reg. #137550 Service Rating: 0°F to 370°F, -18°C to 190°C TDS (Aerosol) TDS SDS -
Sale!
50350 – Jet-Lube White Lithium Grease 14 oz Cartridge
Original price was: $13.88.$12.49Current price is: $12.49.All-Purpose Grease w/ PTFE - H2 Jet-Lube WHITE LITHIUM is a premium all-purpose grease that provides superior performance and protection. WHITE LITHIUM GREASE with PTFE penetrates and forms a long lasting protective film that will withstand heavy loads and will not run or wash away. Benefits of using White Lithium Has a dropping point of >425°F Highly water-resistant Rust & corrosion inhibitors Pumpable High strength fluid film High lithium soap content >10% Pumpable Fortified with PTFE anti-wear additives Timken load - 45 lbs. Specifications of 50350 WHITE LITHIUM Base Materials: Lithium / Petroleum Oils Certifications: CFIA listed, NSF Registered H2 Bulk - Reg. #137549 Aerosol - Reg. #137550 Service Rating: 0°F to 370°F, -18°C to 190°C TDS (Aerosol) TDS SDS -
50400130 – Lubchem Everlast 50-400 Valve Lubricant / Sealant – 130 LB. / 16 Gal Drum
50-400 is resistant to water, organic acids, dilute caustic solutions and hydrocarbons such as gasoline, jet fuel, lubricating oils and mixtures of these products. 50-400 is inhibited for use in H2S and/or CO2. Meets Mil-G-6032 “Grease Plug Valve, Gasoline & Oil Resistant.” Available in winter grade to < -40 F. Applications: For use in plug, ball, and gate valves. Suitable for use in hydrocarbon gasses. DO NOT use in oxygen service. Water insoluble and washout resistant Fully additive treated 100% synthetic High metal adhesion Excellent corrosion resistance Inhibited for H2S and CO2 Physical Properties: Color: Light Brown Temperature Range: -20 to 450°F Consistency, Cone Penetration (D-217): 215 to 230 Drop Point, °C: None Thickener: Inorganic TDS -
5040040 – Lubchem Everlast 50-400 Valve Lubricant / Sealant – 40 LB. / 5 Gal Pail
50-400 is resistant to water, organic acids, dilute caustic solutions and hydrocarbons such as gasoline, jet fuel, lubricating oils and mixtures of these products. 50-400 is inhibited for use in H2S and/or CO2. Meets Mil-G-6032 “Grease Plug Valve, Gasoline & Oil Resistant.” Available in winter grade to < -40 F. Applications: For use in plug, ball, and gate valves. Suitable for use in hydrocarbon gasses. DO NOT use in oxygen service. Water insoluble and washout resistant Fully additive treated 100% synthetic High metal adhesion Excellent corrosion resistance Inhibited for H2S and CO2 Physical Properties: Color: Light Brown Temperature Range: -20 to 450°F Consistency, Cone Penetration (D-217): 215 to 230 Drop Point, °C: None Thickener: Inorganic TDS -
50400420 – Lubchem Everlast 50-400 Valve Lubricant / Sealant – 420 LB. / 55 Gal Drum
50-400 is resistant to water, organic acids, dilute caustic solutions and hydrocarbons such as gasoline, jet fuel, lubricating oils and mixtures of these products. 50-400 is inhibited for use in H2S and/or CO2. Meets Mil-G-6032 “Grease Plug Valve, Gasoline & Oil Resistant.” Available in winter grade to < -40 F. Applications: For use in plug, ball, and gate valves. Suitable for use in hydrocarbon gasses. DO NOT use in oxygen service. Water insoluble and washout resistant Fully additive treated 100% synthetic High metal adhesion Excellent corrosion resistance Inhibited for H2S and CO2 Physical Properties: Color: Light Brown Temperature Range: -20 to 450°F Consistency, Cone Penetration (D-217): 215 to 230 Drop Point, °C: None Thickener: Inorganic TDS -
50400BLK- 130 – Lubchem Everlast 50-400 BLK Valve Lubricant / Sealant – 130 LB. / 16 Gal Drum
H2S & CO2 Valve Lubricant/Sealant 50-400 BLK is resistant to water, organic acids, dilute caustic solutions and hydrocarbons such as gasoline, jet fuel, lubricating oils and mixtures of these products. 50-400 BLK is inhibited for use in H2S and CO2. Contains moly and graphite. Available in NLGI Grade 2 & 3. Applications: For use in plug, ball and gate valves. Suitable for use in hydrocarbon gases. DO NOT use in oxygen service. Meets Mil-G-6032 “Grease Plug Valve, Gasoline and Oil Resistant” Water insoluble and washout resistant Fully additive treated 100% synthetic High metal adhesion Excellent corrosion resistance Inhibited for H2S and CO2 Physical Properties: Color: Dark grey to black Base Oil: Synthetic Temperature Range: -20 to 500°F Consistency, Cone Penetration (D-217) NLGI 1: 310-340 NLGI 2: 265-295 NLGI 3: 220-250 Drop Point, °C: None Thickener: Inorganic TDS -
50400BLK- 420 – Lubchem Everlast 50-400 BLK Valve Lubricant / Sealant – 420 LB. / 55 Gal Drum
H2S & CO2 Valve Lubricant/Sealant 50-400 BLK is resistant to water, organic acids, dilute caustic solutions and hydrocarbons such as gasoline, jet fuel, lubricating oils and mixtures of these products. 50-400 BLK is inhibited for use in H2S and CO2. Contains moly and graphite. Available in NLGI Grade 2 & 3. Applications: For use in plug, ball and gate valves. Suitable for use in hydrocarbon gases. DO NOT use in oxygen service. Meets Mil-G-6032 “Grease Plug Valve, Gasoline and Oil Resistant” Water insoluble and washout resistant Fully additive treated 100% synthetic High metal adhesion Excellent corrosion resistance Inhibited for H2S and CO2 Physical Properties: Color: Dark grey to black Base Oil: Synthetic Temperature Range: -20 to 500°F Consistency, Cone Penetration (D-217) NLGI 1: 310-340 NLGI 2: 265-295 NLGI 3: 220-250 Drop Point, °C: None Thickener: Inorganic TDS -
50400BLK- K12 – Lubchem Everlast 50-400 BLK Valve Lubricant / Sealant – K-Stick (12 PER CASE)
H2S & CO2 Valve Lubricant/Sealant 50-400 BLK is resistant to water, organic acids, dilute caustic solutions and hydrocarbons such as gasoline, jet fuel, lubricating oils and mixtures of these products. 50-400 BLK is inhibited for use in H2S and CO2. Contains moly and graphite. Available in NLGI Grade 2 & 3. Applications: For use in plug, ball and gate valves. Suitable for use in hydrocarbon gases. DO NOT use in oxygen service. Meets Mil-G-6032 “Grease Plug Valve, Gasoline and Oil Resistant” Water insoluble and washout resistant Fully additive treated 100% synthetic High metal adhesion Excellent corrosion resistance Inhibited for H2S and CO2 Physical Properties: Color: Dark grey to black Base Oil: Synthetic Temperature Range: -20 to 500°F Consistency, Cone Penetration (D-217) NLGI 1: 310-340 NLGI 2: 265-295 NLGI 3: 220-250 Drop Point, °C: None Thickener: Inorganic TDS -
50400BLK-40 – Lubchem Everlast 50-400 BLK Valve Lubricant / Sealant – 40 LB. / 5 Gal Pail
H2S & CO2 Valve Lubricant/Sealant 50-400 BLK is resistant to water, organic acids, dilute caustic solutions and hydrocarbons such as gasoline, jet fuel, lubricating oils and mixtures of these products. 50-400 BLK is inhibited for use in H2S and CO2. Contains moly and graphite. Available in NLGI Grade 2 & 3. Applications: For use in plug, ball and gate valves. Suitable for use in hydrocarbon gases. DO NOT use in oxygen service. Meets Mil-G-6032 “Grease Plug Valve, Gasoline and Oil Resistant” Water insoluble and washout resistant Fully additive treated 100% synthetic High metal adhesion Excellent corrosion resistance Inhibited for H2S and CO2 Physical Properties: Color: Dark grey to black Base Oil: Synthetic Temperature Range: -20 to 500°F Consistency, Cone Penetration (D-217) NLGI 1: 310-340 NLGI 2: 265-295 NLGI 3: 220-250 Drop Point, °C: None Thickener: Inorganic TDS -
50400K12 – Lubchem Everlast 50-400 Valve Lubricant / Sealant – K-Stick (12 PER CASE)
50-400 is resistant to water, organic acids, dilute caustic solutions and hydrocarbons such as gasoline, jet fuel, lubricating oils and mixtures of these products. 50-400 is inhibited for use in H2S and/or CO2. Meets Mil-G-6032 “Grease Plug Valve, Gasoline & Oil Resistant.” Available in winter grade to < -40 F. Applications: For use in plug, ball, and gate valves. Suitable for use in hydrocarbon gasses. DO NOT use in oxygen service. Water insoluble and washout resistant Fully additive treated 100% synthetic High metal adhesion Excellent corrosion resistance Inhibited for H2S and CO2 Physical Properties: Color: Light Brown Temperature Range: -20 to 450°F Consistency, Cone Penetration (D-217): 215 to 230 Drop Point, °C: None Thickener: Inorganic TDS -
Sale!
50641 – Jet-Lube Food Grade Silicone 12 oz Aerosol
Original price was: $14.20.$12.78Current price is: $12.78.Food Grade Lubricant - NSF H1 JET-LUBE FOOD GRADE SILICONE is an excellent lubricant for use on processing equipment in all types of food and food-related industries where incidental food contact may occur. FOOD GRADE SILICONE stops sticking, squeaking, and binding of moving parts. It's an excellent release agent and will not gum, melt, freeze, become rancid, or form unwanted residues. FOOD GRADE SILICONE leaves a clear film that is moisture resistant, long-wearing, odorless, colorless, non-toxic, and non-staining. Flammable by Flame Extension Test. Benefits of using Food Grade Silicone Non-toxic Safe on plastics Non-staining Colorless & Odorless Excellent release agent Contains no 1:1:1 Trichloroethane, Freon TF or SARA Listed Ingredients Specifications of 50641 FOOD GRADE SILICONE Base Materials: Petroleum Distillates / Fluid White Oils Certifications: NSF H1 Registered #137548, FDA Regulation CFR-21, Part 178.3570 Incidental Food Contact, Authorized for use by Agriculture Canada Service Rating: 0°F to 350°F, -17°C to 177°C TDS SDS -
5090B APPLIANCE LUBRICANT Drum Greases
Whitmore's 5090B Appliance Lubricant is a colorless, nontoxic grease designed for use where incidental contact with the skin or with food is possible. It is highly resistant to water and most cleaners. Whitmore's 5090B Appliance Lubricant contains no solids or substances that might cause staining. The high viscosity base oil provides excellent film strength. The gelling agent used creates a highly stable, nondrip grease at elevated temperatures. Whitmore's 5090B Appliance Lubricant is a true multipurpose grease that is compatible with plastics, elastomers, and other components normally found in toys, vehicles, and appliances. This lubricant should not be used in highly loaded equipment (steel mills, mining, etc.) or at temperatures consistently above 350°F (177°C).BENEFITS: WATER-RESISTANT - remains in place when the appliance is washed. SMOOTH CONSISTENCY - extremely adherent to metal, yet it does not attract dust. CORROSION INHIBITED - protects metal parts from rust. COLOR - colorless, slightly opaque, will not cause staining. NONDRIP - will not drip when exposed to temperatures up to 350°F (177°C).APPLICATIONS: Vehicle doors, sliding doors, plastics, toys, and appliances (except oven doors). Where a nonstaining or food grade product is required. Where product appearance is important. Where long product life is advantageous Size and Type Container: Drum Weight: 441 LBS. -
5090B APPLIANCE LUBRICANT Keg Greases
$1,528.79Whitmore's 5090B Appliance Lubricant is a colorless, nontoxic grease designed for use where incidental contact with the skin or with food is possible. It is highly resistant to water and most cleaners. Whitmore's 5090B Appliance Lubricant contains no solids or substances that might cause staining. The high viscosity base oil provides excellent film strength. The gelling agent used creates a highly stable, nondrip grease at elevated temperatures. Whitmore's 5090B Appliance Lubricant is a true multipurpose grease that is compatible with plastics, elastomers, and other components normally found in toys, vehicles, and appliances. This lubricant should not be used in highly loaded equipment (steel mills, mining, etc.) or at temperatures consistently above 350°F (177°C).BENEFITS: WATER-RESISTANT - remains in place when the appliance is washed. SMOOTH CONSISTENCY - extremely adherent to metal, yet it does not attract dust. CORROSION INHIBITED - protects metal parts from rust. COLOR - colorless, slightly opaque, will not cause staining. NONDRIP - will not drip when exposed to temperatures up to 350°F (177°C).APPLICATIONS: Vehicle doors, sliding doors, plastics, toys, and appliances (except oven doors). Where a nonstaining or food grade product is required. Where product appearance is important. Where long product life is advantageous Size and Type Container: Keg Weight: 134 LBS. -
5090B APPLIANCE LUBRICANT Pail Greases
$409.77Whitmore's 5090B Appliance Lubricant is a colorless, nontoxic grease designed for use where incidental contact with the skin or with food is possible. It is highly resistant to water and most cleaners. Whitmore's 5090B Appliance Lubricant contains no solids or substances that might cause staining. The high viscosity base oil provides excellent film strength. The gelling agent used creates a highly stable, nondrip grease at elevated temperatures. Whitmore's 5090B Appliance Lubricant is a true multipurpose grease that is compatible with plastics, elastomers, and other components normally found in toys, vehicles, and appliances. This lubricant should not be used in highly loaded equipment (steel mills, mining, etc.) or at temperatures consistently above 350°F (177°C).BENEFITS: WATER-RESISTANT - remains in place when the appliance is washed. SMOOTH CONSISTENCY - extremely adherent to metal, yet it does not attract dust. CORROSION INHIBITED - protects metal parts from rust. COLOR - colorless, slightly opaque, will not cause staining. NONDRIP - will not drip when exposed to temperatures up to 350°F (177°C).APPLICATIONS: Vehicle doors, sliding doors, plastics, toys, and appliances (except oven doors). Where a nonstaining or food grade product is required. Where product appearance is important. Where long product life is advantageous Size and Type Container: Pail Weight: 38 LBS. -
Sale!
52029 – Jet-Lube Rubber Lubricant 425 lb Drum
Original price was: $3,836.00.$3,452.40Current price is: $3,452.40.Water-Based Mold Release Agent JET-LUBE RUBBER LUBRICANT is a water-based, multipurpose, environmentally safe silicone product that contains twice the silicone content of leading aerosols for increased protection. RUBBER LUBRICANT makes assembly of plastic and rubber parts fast and easy. Whether squirted, sprayed, or brushed on, RUBBER LUBRICANT provides a temporary, wet, slippery surface, and then either dries to a thin protective film, or is absorbed into natural or synthetic rubber. As a "Mold Release Agent", the larger silicone content and higher silicone viscosity provides maximum release capacity under even the most severe molding conditions. Benefits of using Rubber Lubricant™ Water-based High silicone >15% Chemically inert Easy to apply Environmentally safe Excellent lubricity Excellent release properties Low coefficient of friction Non-flammable Will not melt or gum Non-toxic Low foaming Odorless Heat stable Non-staining Non-flammable Ozone-friendly Specifications of 52029 RUBBER LUBRICANT™ Base Materials: Silicone TDS SDS -
Sale!
52033 – Jet-Lube Rubber Lubricant 1 gal Jug
Original price was: $89.36.$80.42Current price is: $80.42.Water-Based Mold Release Agent JET-LUBE RUBBER LUBRICANT is a water-based, multipurpose, environmentally safe silicone product that contains twice the silicone content of leading aerosols for increased protection. RUBBER LUBRICANT makes assembly of plastic and rubber parts fast and easy. Whether squirted, sprayed, or brushed on, RUBBER LUBRICANT provides a temporary, wet, slippery surface, and then either dries to a thin protective film, or is absorbed into natural or synthetic rubber. As a "Mold Release Agent", the larger silicone content and higher silicone viscosity provides maximum release capacity under even the most severe molding conditions. Benefits of using Rubber Lubricant™ Water-based High silicone >15% Chemically inert Easy to apply Environmentally safe Excellent lubricity Excellent release properties Low coefficient of friction Non-flammable Will not melt or gum Non-toxic Low foaming Odorless Heat stable Non-staining Non-flammable Ozone-friendly Specifications of 52033 RUBBER LUBRICANT™ Base Materials: Silicone TDS SDS -
Sale!
52035 – Jet-Lube Rubber Lubricant 41.5 lb Pail
Original price was: $386.46.$347.82Current price is: $347.82.Water-Based Mold Release Agent JET-LUBE RUBBER LUBRICANT is a water-based, multipurpose, environmentally safe silicone product that contains twice the silicone content of leading aerosols for increased protection. RUBBER LUBRICANT makes assembly of plastic and rubber parts fast and easy. Whether squirted, sprayed, or brushed on, RUBBER LUBRICANT provides a temporary, wet, slippery surface, and then either dries to a thin protective film, or is absorbed into natural or synthetic rubber. As a "Mold Release Agent", the larger silicone content and higher silicone viscosity provides maximum release capacity under even the most severe molding conditions. Benefits of using Rubber Lubricant™ Water-based High silicone >15% Chemically inert Easy to apply Environmentally safe Excellent lubricity Excellent release properties Low coefficient of friction Non-flammable Will not melt or gum Non-toxic Low foaming Odorless Heat stable Non-staining Non-flammable Ozone-friendly Specifications of 52035 RUBBER LUBRICANT™ Base Materials: Silicone TDS SDS -
Sale!
52043 – Jet-Lube Rubber Lubricant 1 lb Trigger Sprayer
Original price was: $27.73.$24.95Current price is: $24.95.Water-Based Mold Release Agent RUBBER LUBRICANT 16 OZ. TRIGGER SPRAY is a water-based, multipurpose, environmentally safe silicone product that contains twice the silicone content of leading aerosols for increased protection. RUBBER LUBRICANT makes assembly of plastic and rubber parts fast and easy. Whether squirted, sprayed, or brushed on, RUBBER LUBRICANT provides a temporary, wet, slippery surface, and then either dries to a thin protective film, or is absorbed into natural or synthetic rubber. As a "Mold Release Agent", the larger silicone content and higher silicone viscosity provides maximum release capacity under even the most severe molding conditions. Benefits of using Rubber Lubricant™ Water-based High silicone >15% Chemically inert Easy to apply Environmentally safe Excellent lubricity Excellent release properties Low coefficient of friction Non-flammable Will not melt or gum Non-toxic Low foaming Odorless Heat stable Non-staining Non-flammable Ozone-friendly Specifications of 52043 RUBBER LUBRICANT™ Base Materials: Silicone TDS SDS -
Sale!
52529 – Jet-Lube Ems 425 lb Drum
Original price was: $4,167.02.$3,750.32Current price is: $3,750.32.Water-Based Silicone Lubricant Jet-Lube EMS is an emulsified, multipurpose lubricant that lubricates, waterproofs and protects while being odorless, tasteless and Non-staining. EMS stops sticking, squeaking and binding of moving parts. It is an excellent release agent and ideal clear, clean lubricant. Benefits of using EMS™ Non-toxic No VOC's Non-staining Odorless Non-flammable Low Foaming Environmentally safe Specifications of 52529 EMS™ Base Materials: Silicone TDS SDS -
Sale!
52533 – Jet-Lube Ems 8.3 lb Jug
Original price was: $110.46.$99.42Current price is: $99.42.Water-Based Silicone Lubricant Jet-Lube EMS is an emulsified, multipurpose lubricant that lubricates, waterproofs and protects while being odorless, tasteless and Non-staining. EMS stops sticking, squeaking and binding of moving parts. It is an excellent release agent and ideal clear, clean lubricant. Benefits of using EMS™ Non-toxic No VOC's Non-staining Odorless Non-flammable Low Foaming Environmentally safe Specifications of 52533 EMS™ Base Materials: Silicone TDS SDS -
Sale!
52535 – Jet-Lube Ems 41.5 lb Pail
Original price was: $433.17.$389.85Current price is: $389.85.Water-Based Silicone Lubricant EMS 5 GAL. JUG is an emulsified, multipurpose lubricant that lubricates, waterproofs and protects while being odorless, tasteless and Non-staining. EMS stops sticking, squeaking and binding of moving parts. It is an excellent release agent and ideal clear, clean lubricant. Benefits of using EMS™ Non-toxic No VOC's Non-staining Odorless Non-flammable Low Foaming Environmentally safe Specifications: Base Materials: Silicone TDS SDS -
Sale!
52543 – Jet-Lube Ems 1 lb Trigger Sprayer
Original price was: $27.03.$24.33Current price is: $24.33.Water-Based Silicone Lubricant Jet-Lube EMS is an emulsified, multipurpose lubricant that lubricates, waterproofs and protects while being odorless, tasteless and Non-staining. EMS stops sticking, squeaking and binding of moving parts. It is an excellent release agent and ideal clear, clean lubricant. Benefits of using EMS™ Non-toxic No VOC's Non-staining Odorless Non-flammable Low Foaming Environmentally safe Specifications of 52543 EMS™ Base Materials: Silicone TDS SDS -
55160 – JET-LUBE JET-LOK TL-42 fish bowl
$0.93Removable Threadlocker JET-LUBE JET-LOK TL-42 is the most widely used threadlocker for medium-strength, general purpose use. JET-LOK TL-42 will hold all metric and imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. Benefits of using Jet-Lok® TL-42 Removable Does not run off or drip Replaces lock washers Controlled torque tension Thixotropic Typical breakaway strength: 100-200 in-lb Typical prevailing strength: 30-60 in-lb Specifications of 55160 JET-LUBE JET-LOK TL-42 fish bowl Base Materials: Methacrylate Certifications: MIL-S-46163A Type II, Grade N, MIL-S-22473E Letter Grade CVV Service Rating: -65°F to 300°F, -54°C to 148°C TDS -
55161 – JET-LUBE JET-LOK TL-42 softpack
$0.93Removable Threadlocker JET-LUBE JET-LOK TL-42 is the most widely used threadlocker for medium-strength, general purpose use. JET-LOK TL-42 will hold all metric and imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. Benefits of using Jet-Lok® TL-42 Removable Does not run off or drip Replaces lock washers Controlled torque tension Thixotropic Typical breakaway strength: 100-200 in-lb Typical prevailing strength: 30-60 in-lb Specifications of 55161 JET-LUBE JET-LOK TL-42 softpack Base Materials: Methacrylate Certifications: MIL-S-46163A Type II, Grade N, MIL-S-22473E Letter Grade CVV Service Rating: -65°F to 300°F, -54°C to 148°C TDS -
55165 – JET-LUBE JET-LOK TL-42 10 ml bottle
$0.93Removable Threadlocker JET-LUBE JET-LOK TL-42 is the most widely used threadlocker for medium-strength, general purpose use. JET-LOK TL-42 will hold all metric and imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. Benefits of using Jet-Lok® TL-42 Removable Does not run off or drip Replaces lock washers Controlled torque tension Thixotropic Typical breakaway strength: 100-200 in-lb Typical prevailing strength: 30-60 in-lb Specifications of 55165 JET-LUBE JET-LOK TL-42 10 ml bottle Base Materials: Methacrylate Certifications: MIL-S-46163A Type II, Grade N, MIL-S-22473E Letter Grade CVV Service Rating: -65°F to 300°F, -54°C to 148°C TDS -
55166 – JET-LOK® TL42-50
$16.96Removable Threadlocker JET-LUBE JET-LOK TL-42 is the most widely used threadlocker for medium-strength, general purpose use. JET-LOK TL-42 will hold all metric and imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. Benefits of using Jet-Lok® TL-42 Removable Does not run off or drip Replaces lock washers Controlled torque tension Thixotropic Typical breakaway strength: 100-200 in-lb Typical prevailing strength: 30-60 in-lb Specifications of 55166 - JET-LOK® TL42-50 Base Materials: Methacrylate Certifications: MIL-S-46163A Type II, Grade N, MIL-S-22473E Letter Grade CVV Service Rating: -65°F to 300°F, -54°C to 148°C TDS -
55167 – JET-LUBE JET-LOK TL-42 250 ml bottle
$0.93Removable Threadlocker JET-LUBE JET-LOK TL-42 is the most widely used threadlocker for medium-strength, general purpose use. JET-LOK TL-42 will hold all metric and imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. Benefits of using Jet-Lok® TL-42 Removable Does not run off or drip Replaces lock washers Controlled torque tension Thixotropic Typical breakaway strength: 100-200 in-lb Typical prevailing strength: 30-60 in-lb Specifications of 55167 JET-LUBE JET-LOK TL-42 250 ml bottle Base Materials: Methacrylate Certifications: MIL-S-46163A Type II, Grade N, MIL-S-22473E Letter Grade CVV Service Rating: -65°F to 300°F, -54°C to 148°C TDS -
55666 – JET-LUBE JET-LOK TL-22 50 ml tube
$0.93JET-LUBE JET-LOK TL-22 Removable Threadlocker is a thixotropic anaerobic thread locker of low strength designed for easy disassembly of treated components. BENEFITS: Removable Threadlocker Thixotropic anaerobic Low strength designed Easy disassembly Low removal torque Vibration and shock resistance Suitable for most small diameter, fine threaded screws, nuts and bolts Full Cure Time: 24 hours Typical Breakaway Strength: 50-100 in-lb Typical Prevailing Strength: 20-50 in-lb TL-22's anaerobic nature allows it to cure only when confined between metal parts. Low removal torque allows easy disassembly yet provides maximum vibration and shock resistance. Applications All small fasteners where vibration loosening prevention and non-leakage through threaded fastening is required. Ideal on small set screws, brass and most types of small threaded nuts, bolts, screws, hex and slot driven components including keyed fasteners, etc. Not recommended for oxygen service. Service Rating -65°F to 300°F -54°C to 158°C -
57966 – JET-LUBE JET-LOK® HP-45 50 ml tube
$18.53JET-LUBE JET-LOK® HP-45 JET-LUBE JET-LOK® HP-45 is a pneumatic & Hydraulic Sealant is a fast curing, high strength anaerobic sealant that seals hydraulic and pneumatic fittings up to 2” in diameter, resisting high pressures and vibration loosening. This product has excellent solvent resistance and withstands temperatures to 300°F (148°C). BENEFITS of JET-LOK® HP-45 Fast curing High strength anaerobic sealant Seals hydraulic and pnematic fittings Resists high pressures and vibration Excellent solvent resistance Withstands temperatures up to 300°F Typical strength: 2,000-3,000 psi Fast cure to fixture usually under 30 minutes. Temperature range: -65°F (-54°C) to <300°F (148°C). Typical strength: 2,000-3,000 psi. Applications Typical applications are hydraulic and pneumatic fittings, servo-mechanisms, and fine-filtration systems. Where cure speed is extended due to low temperatures or inactive surfaces, appropriate activators may be used. Best results are found if High Pressure Sealant is applied to 2nd or 3rd threadform. Excess can be wiped away, any migration into lines will not solidify and can be flushed away upon activation of the equipment. Not recommended fo oxygen service. Service Rating -65°F to 300°F -54°C to 148°C -
59071 – JET-LUBE JET-LOK EC-GEL 1 oz. tube
$0.93JET-LUBE JET-LOK EC-GEL Instant Super-Glue is a thixotropic gel-like super-glue. It is a non-drip formulation and will not run on vertical surfaces. BENEFITS: Instant super-glue Medium to low viscosity cyanoacrylate Bonds plastics and rubber Fast bond time Cure speed: 15-40 seconds General purpose bonding of plastics, name plates to equipment (plastic), thread termination on book bindings. Recommended for use on small gaps or relatively smooth, even surfaces. Applications Where vertical surfaces and/or large gaps are being bonded, EC-Gel is ideal. Using a gel formula as super glue is ideal for eliminating waste and the issues to relate to gluing your finger to the part. Apply the gel directly to the surface by placing one drop at the point of contact allowing the glue to travel or spread as you press fit the item together. Service Rating -65°F to 180°F -54°C to 82°C -
Sale!
60050 – Jet-Lube Jet-Red Ep 2 14 oz Cartridge
Original price was: $189.92.$170.93Current price is: $170.93.JET-RED™ is a highly versatile, high-temperature lithium complex grease that can be used for a wide range of lubrication requirements. It provides exceptional resistance against heat, water, oxidation, and heavy loads. Due to its water resistance, high dropping point, and corrosion and oxidation inhibitors, JET-RED provides protection in environments where dirt, dust, high humidity, rain, snow, and extreme temperatures are significant concerns. With JET-RED, you can streamline your inventory and equipment lubrication needs, making it a preferred choice for various industries. JET-RED Applications: Specifically designed for use in bearings, anti-friction bearings, journals, and general greasing applications where a multipurpose product is preferred for streamlined inventory and equipment. Ideal for oil drilling rigs, construction and road building equipment, mining operations, shipbuilding activities, and other applications. Also suitable for use in fans, blowers, pumps, conveyor bearings, drive trains, ball bearings, journal bearings, roller bearings, screw jacks, universal joints, and other lubrication points that have sliding or rolling friction. NLGI 2 Benefits: Economical Protects against rust and corrosion Pumpable Highly adhesive to metal Resistant to heat, water, oxidation & heavy loading High film strength Specifications: Base Materials: Lithium/Petroleum Oil Service Rating: 0°F to 400°F (-18°C to 204°C) PDS SDS -
Sale!
60242 – Jet-Lube Ps Terminal 10 oz Aerosol
Original price was: $50.87.$45.78Current price is: $45.78.CFC-Free Electrical Contact Cleaner - NSF K2 Jet-Lube PS TERMINAL™ is an electrical contact cleaner formulated with a blend of HCFC and HFC solvents and propellants to safely and quickly clean electrical and electronic components and equipment without damaging the environment or ozone levels. PS TERMINAL penetrates and remove dirt, grease and organic contaminants and then evaporates, leaving a residue-free surface. Benefits: Fast evaporating Residue-free No VOC's Non-flammable Non-staining Odorless High pressure stream spray Specifications: Base Materials: SolventCertifications: NSF Registered K2 Reg.# 136910Service Rating: >35kv Dielectric Strength TDSSDS -
Sale!
60541 – Jet-Lube Z-Plate 14.75 oz Aerosol
Original price was: $20.75.$18.67Current price is: $18.67.Zinc-Rich Galvanized Coating Jet-Lube Z-PLATE™ provides the protection of hot-dip galvanizing plus the convenience of on-the-job aerosol application. Z-PLATE contains 95% pure zinc and forms a tough, durable and flexible zinc metal coating that actually bonds electro-chemically with the base metal to protect against rust, rust-spreading and corrosion. Ideal tubing connections - aluminum. Benefits of using Z-Plate™ Easy to apply Quick drying Water displacing Dry film Long Lasting Indoor/Outdoor use Rust & corrosion inhibited Permanent, Flexible Specifications of 60541 Z-PLATE™ Base Materials: Zinc / Resin - Epoxy EsterCertifications: MIL-PRF-26915D (USAF), USDA Authorized TDS (Aerosol) SDS -
Sale!
61442 – Jet-Lube Clean-Up Ii 14 oz Aerosol
Original price was: $12.54.$11.28Current price is: $11.28.Industrial Grade Degrease Jet-Lube CLEAN-UP II is a specially formulated, low VOC blend of solvents designed to quickly dissolve and rinse away dirt, grease, grime, oil, tar and wax while being both environmentally responsible and ozone friendly. CLEAN UP II™ contains no chlorinated or fluorinated solvents, no hazardous air pollutants and evaporates residue-free quickly. It is California compliant and acceptable for use in CARB/OTC States. CLEAN UP II starts working immediately on contact, breaking down and dissolving even stubborn contaminants without the use of fluorinated, chlorinated or SARA listed ingredients. It evaporates quickly while cleaning and leaves a residue-free surface. Safe on all metals and some plastics. Caution: Flammable Benefits of using Clean-Up™ II Replaces 1:1:1 Trichloroethane Fast evaporating Non-corrosive Non-staining Non-chlorinated Residue-free Low VOC's Specifications of 61442 CLEAN-UP™ II Base Materials: Acetone & Heptane Isomers Flammable Solvents Certifications: California Compliant Service Rating: Dielectric strength & breakdown voltage - 6.3 KV AC TDS (Aerosol) SDS -
61533 – CLEAN-UP™
$166.04A cleaner that is residue free and meets the requirements for a high rating of 29,000KV for electrical and energized equipment. A degreaser that penetrates heavy oil and grease products to breakdown and dissolve the petroleum base ingredients to clean the surface prior to painting or preparing for assembly. -
Sale!
61535 – Jet-Lube Clean-Up 5 gal Pail
Original price was: $501.47.$451.32Current price is: $451.32.A cleaner that is residue free and meets the requirements for a high rating of 29,000KV for electrical and energized equipment. A degreaser that penetrates heavy oil and grease products to breakdown and dissolve the petroleum base ingredients to clean the surface prior to painting or preparing for assembly. -
Sale!
61542 – Jet-Lube Clean-Up 18 oz Aerosol
Original price was: $17.86.$16.08Current price is: $16.08.Cleaner Safety Solvent - NSF K1 An industrial strength, specially formulated blend of non-flammable solvents. CLEAN-UP™ should be used to dissolve grease, oil, wax, paint, grime, dirt and dust. CLEAN-UP does not contain acids or alkalis and will not damage metal surfaces. Not for use in California. See SDS for additional OTC/LADCO state restrictions. In California and other CARB states use CLEAN UP II™. Benefits of using Clean-Up™ Ozone-friendly Non-flammable Non-staining Low odor Acid & alkali-free Specifications: Base Materials: Nonflammable Solvents Certifications: NSF K1 Registered Reg# 137558 Service Rating: Dielectric strength - >53 KV TDS (Aerosol) SDS SDS (Aerosol) PDS -
61729 – Jet-Lube C-PLATE 50 gal. drum
$0.93Copper Dry Film Coating Specifically designed to aid in the break-in process of freshly-cut threads where plating services are not available, nor desired due to the occupational or environmental hazards of those chemicals. It can also be used in conjunction with plated surfaces for additional protection. C-PLATE has low VOC’s, as exempted ketones are used as the diluent solvents. C-PLATE provides a durable micro-thin coating of copper to machined surfaces, aiding in preventing galling during the break-in process. The micro-sized copper flakes adhere to the steel, utilizing a high-tech resin that air-cures at room temperature in 4 to 6 hours. With the addition of heat, an even stronger, more durable bond may be achieved. Once cured, C-PLATE forms a durable, acid-free, corrosion-resistant finish which may then be burnished into the steel surface during the initial work hardening of the threaded connection. The thin copper coating provides a dissimilar metal which acts to prohibit the metal-to-metal contact under bearing loads which may cause galling damage to threaded connections. Benefits of using Jet-Lube C-Plate™ Lead & zinc-free Low VOC's Durable, acid-free, corrosion-resistant finish Ozone-friendly Fast evaporating Greaseless, acid-free film Specifications: Base Materials: Copper TDS (Aerosol) TDS SDS -
Sale!
61741 – Jet-Lube C-Plate 12 oz Aerosol
Original price was: $33.19.$29.88Current price is: $29.88.Copper Dry Film Coating Jet-Lube C-PLATE is specifically designed to aid in the break-in process of freshly-cut threads where plating services are not available, nor desired due to the occupational or environmental hazards of those chemicals. It can also be used in conjunction with plated surfaces for additional protection. C-PLATE has low VOC’s, as exempted ketones are used as the diluent solvents. C-PLATE provides a durable micro-thin coating of copper to machined surfaces, aiding in preventing galling during the break-in process. The micro-sized copper flakes adhere to the steel, utilizing a high-tech resin that air-cures at room temperature in 4 to 6 hours. With the addition of heat, an even stronger, more durable bond may be achieved. Once cured, C-PLATE forms a durable, acid-free, corrosion-resistant finish which may then be burnished into the steel surface during the initial work hardening of the threaded connection. The thin copper coating provides a dissimilar metal which acts to prohibit the metal-to-metal contact under bearing loads which may cause galling damage to threaded connections. Benefits of using C-Plate™ Lead & zinc-free Low VOC's Durable, acid-free, corrosion-resistant finish Ozone-friendly Fast evaporating Greaseless, acid-free film Specifications of Jet-Lube C-PLATE AEROSOL Base Materials: Copper TDS (Aerosol) TDS SDS -
Sale!
63016 – Jet-Lube Marine-Mp 35 lb Pail
Original price was: $325.73.$293.16Current price is: $293.16.Multipurpose Grease (Purple) A mixed soap, calcium-lithium grease boosted with polymers that is ideal for a multitude of onboard applications where both economy and performance are important. MARINE-MP #2 is a smooth, buttery grease with an operating temperature range of -10F to 325F to provide ingle grease use for a variety of applications. It's water resistant, tenacious, and has excellent resistance to the effects of salt spray, heat, water, oxidation, and other adverse conditions common to marine usage. As a result, this product will lower maintenance costs and simplify inventory while providing excellent performance. Ideal for anti-friction and plain bearings. Benefits of using Marine-MP™ Water-resistant Heavy load EP Package Pumpable Timken Load - 55 lbs. Specifications: Base Materials: Calcium - Lithium / Petroleum Certifications: MILITARY - 915000103 CARD Service Rating: -10°F to 325°F, -23°C to 163°C TDS SDS -
Sale!
63024 – Jet-Lube Marine-Mp 120 lb Keg
Original price was: $1,163.89.$1,047.50Current price is: $1,047.50.Multipurpose Grease (Purple) A mixed soap, calcium-lithium grease boosted with polymers that is ideal for a multitude of onboard applications where both economy and performance are important. MARINE-MP #2 is a smooth, buttery grease with an operating temperature range of -10F to 325F to provide ingle grease use for a variety of applications. It's water resistant, tenacious, and has excellent resistance to the effects of salt spray, heat, water, oxidation, and other adverse conditions common to marine usage. As a result, this product will lower maintenance costs and simplify inventory while providing excellent performance. Ideal for anti-friction and plain bearings. Benefits of using Marine-MP™ Water-resistant Heavy load EP Package Pumpable Timken Load - 55 lbs. Specifications of 63024 MARINE MP #2™ Base Materials: Calcium - Lithium / Petroleum Certifications: MILITARY - 915000103 CARD Service Rating: -10°F to 325°F, -23°C to 163°C TDS SDS -
Sale!
63029 – Jet-Lube Marine Mp #2 400 lb Drum – Metal
Original price was: $2,543.17.$2,288.85Current price is: $2,288.85.Multipurpose Grease (Purple) JET-LUBE MARINE-MP is a mixed soap, calcium-lithium grease boosted with polymers that is ideal for a multitude of onboard applications where both economy and performance are important. MARINE-MP #2 is a smooth, buttery grease with an operating temperature range of -10F to 325F to provide ingle grease use for a variety of applications. It's water resistant, tenacious, and has excellent resistance to the effects of salt spray, heat, water, oxidation, and other adverse conditions common to marine usage. As a result, this product will lower maintenance costs and simplify inventory while providing excellent performance. Ideal for anti-friction and plain bearings. Benefits of using Marine-MP™ Water-resistant Heavy load EP Package Pumpable Timken Load - 55 lbs. Specifications of 63029 JET-LUBE MARINE-MP 50 gal drum Base Materials: Calcium - Lithium / Petroleum Certifications: MILITARY - 915000103 CARD Service Rating: -10°F to 325°F, -23°C to 163°C TDS SDS -
Sale!
63050 – Jet-Lube Marine-Mp 14 oz Cartridge
Original price was: $12.73.$11.45Current price is: $11.45.Multipurpose Grease (Purple) JET-LUBE MARINE-MP is a mixed soap, calcium-lithium grease boosted with polymers that is ideal for a multitude of onboard applications where both economy and performance are important. MARINE-MP #2 is a smooth, buttery grease with an operating temperature range of -10F to 325F to provide ingle grease use for a variety of applications. It's water resistant, tenacious, and has excellent resistance to the effects of salt spray, heat, water, oxidation, and other adverse conditions common to marine usage. As a result, this product will lower maintenance costs and simplify inventory while providing excellent performance. Ideal for anti-friction and plain bearings. Benefits of using MARINE MP #2™ Water-resistant Heavy load EP Package Pumpable Timken Load - 55 lbs. Specifications of 63050 MARINE MP #2™ Base Materials: Calcium - Lithium / Petroleum Certifications: MILITARY - 915000103 CARD Service Rating: -10°F to 325°F, -23°C to 163°C TDS SDS -
Sale!
64016 – Jet-Lube Ep White Grease 35 lb Pail
Original price was: $348.90.$314.01Current price is: $314.01.Multipurpose Grease - Construction Grade Jet-Lube EP WHITE GREASE is specially designed to meet the ever-increasing requirements for high film strength, higher operating temperatures, greater stability and longer lubricant life. EP WHITE GREASE provides a tough protective film ensuring superior lubrication and extended lubrication intervals. Ideal for wheel bearings. Benefits of using EP White Grease Non- staining Fortified with rust & corrosion inhibitors Water-resistant Fluid film lubrication properties Non-drying Timken EP Test – 65 lbs. Specifications of 64016 EP WHITE GREASE Base Materials: Lithium / Petroleum Oils Certifications: MIL-G-18458B (SH) Service Rating: 0°F to 325°F, -18°C to 163°C TDS SDS -
Sale!
64050 – Jet-Lube Ep White Grease 14 oz Cartridge
Original price was: $13.27.$11.94Current price is: $11.94.Multipurpose Grease - Construction Grade Jet-Lube EP WHITE GREASE is specially designed to meet the ever-increasing requirements for high film strength, higher operating temperatures, greater stability and longer lubricant life. EP WHITE GREASE provides a tough protective film ensuring superior lubrication and extended lubrication intervals. Ideal for wheel bearings. Benefits of using EP White Grease Non- staining Fortified with rust & corrosion inhibitors Water-resistant Fluid film lubrication properties Non-drying Timken EP Test – 65 lbs. Specifications of 64050 EP WHITE GREASE Base Materials: Lithium / Petroleum Oils Certifications: MIL-G-18458B (SH) Service Rating: 0°F to 325°F, -18°C to 163°C TDS SDS