Lubricants

LUBRIPLATE MaxTacRed is a premium multi-purpose hightemp EP grease that provides superior performance for onroad and off-road trucks and automobile applications with the versatility to protect construction, farm, marine, and industrial equipment. This high-performance, heavy duty, NLGI 2, lithium complex EP grease utilizes highly refined base oils fortified with extreme pressure agents to provide excellent load-carrying capabilities, and the latest additives to enhance anti-wear, anti-corrosion, anti-rust properties. LUBRIPLATE MaxTacRed delivers outstanding high-temperature performance, exceptional film strength, high shear stability, and excellent water washout resistance. The tacky formulation gives it the ability to stay in applications longer. LUBRIPLATE MaxTacRed is NLGI GC/LB certified for wheel bearing & chassis lubrication. ADVANTAGES GC-LB certified Lithium Complex thickeners provide high dropping point (500+F): Hi-temp stability boosts performance in the presence of heat to extend life of high-speed bearings Stays in place: Tacky Consistency with excellent adhesion properties EP & Anti-wear properties: Superior extreme pressure properties and wear protection under extreme loads provides excellent load-carrying performance Excellent shear stability and retained consistency over long periods, even in severe conditions like off-road or long-distance driving Enhanced water and oxidation resistance: Extremely tacky grease stays where it is put so it is highly resistant to spray-off and water washout and provides a longlasting protective film to prevent corrosion and wear. Boosted rust and corrosion protection protects lubricated parts even in harsh wet environments APPLICATIONS LUBRIPLATE MaxTacRed provides superior protection for most automotive and industrial applications including on and off-road vehicles, trailers and hitches, all truck classifications, farm and construction equipment, wet environments, and in heavy-duty industrial service. MaxTacRed reduces repair and maintenance costs by providing dependable lubrication across a wide range of applications delivering extended run times, longer equipment life, and less downtime. LUBRIPLATE MaxTacRed is recommended for: Auto/Truck Wheel Bearings Boat Trailer Wheel Bearings Disc Brake Wheel Bearings Ball and Universal Joints Bushings, rod ends, couplings, and open gears King Pins, Steering Knuckles, Bucket Pins Chassis lubrication on heavy-duty fleets General farm and construction equipment lubrication Ball, Tapered Roller & spherical roller bearings Lubrication of conveyors, bearings, and springs, pivot points Home use lubricating doors and lawn equipment Data Sheet

LUBRIPLATE MaxTacRed is a premium multi-purpose hightemp EP grease that provides superior performance for onroad and off-road trucks and automobile applications with the versatility to protect construction, farm, marine, and industrial equipment. This high-performance, heavy duty, NLGI 2, lithium complex EP grease utilizes highly refined base oils fortified with extreme pressure agents to provide excellent load-carrying capabilities, and the latest additives to enhance anti-wear, anti-corrosion, anti-rust properties. LUBRIPLATE MaxTacRed delivers outstanding high-temperature performance, exceptional film strength, high shear stability, and excellent water washout resistance. The tacky formulation gives it the ability to stay in applications longer. LUBRIPLATE MaxTacRed is NLGI GC/LB certified for wheel bearing & chassis lubrication. ADVANTAGES GC-LB certified Lithium Complex thickeners provide high dropping point (500+F): Hi-temp stability boosts performance in the presence of heat to extend life of high-speed bearings Stays in place: Tacky Consistency with excellent adhesion properties EP & Anti-wear properties: Superior extreme pressure properties and wear protection under extreme loads provides excellent load-carrying performance Excellent shear stability and retained consistency over long periods, even in severe conditions like off-road or long-distance driving Enhanced water and oxidation resistance: Extremely tacky grease stays where it is put so it is highly resistant to spray-off and water washout and provides a longlasting protective film to prevent corrosion and wear. Boosted rust and corrosion protection protects lubricated parts even in harsh wet environments APPLICATIONS LUBRIPLATE MaxTacRed provides superior protection for most automotive and industrial applications including on and off-road vehicles, trailers and hitches, all truck classifications, farm and construction equipment, wet environments, and in heavy-duty industrial service. MaxTacRed reduces repair and maintenance costs by providing dependable lubrication across a wide range of applications delivering extended run times, longer equipment life, and less downtime. LUBRIPLATE MaxTacRed is recommended for: Auto/Truck Wheel Bearings Boat Trailer Wheel Bearings Disc Brake Wheel Bearings Ball and Universal Joints Bushings, rod ends, couplings, and open gears King Pins, Steering Knuckles, Bucket Pins Chassis lubrication on heavy-duty fleets General farm and construction equipment lubrication Ball, Tapered Roller & spherical roller bearings Lubrication of conveyors, bearings, and springs, pivot points Home use lubricating doors and lawn equipment Data Sheet

The LUBRIPLATE SYN-LTR-2/460 Synthetic HighPerformance Grease is a 100% synthetic product. This product has far superior oxidation stability, better wear protection and significantly better operating temperature ranges than other synthetic greases built with polymers and mineral oil based greases. Manufactured with 100% polyalphaolefin (PAO) base fluids and thickened with lithium complex, the LUBRIPLATE SYN-LTR-2/460 grease is compatible with conventional lithium-thickened, mineral oil-based greases. The LUBRIPLATE SYN-LTR-2/460 grease is fortified with additives to prevent rust and corrosion and to reduce grease bleed. Its distinctive red color and tacky/adhesive texture increases its operating performance APPLICATIONS Perfect for multi-purpose and heavy-duty industrial, construction, aggregate/quarry and automotive applications ADVANTAGES Manufactured with 100% PAO synthetic base fluid: Outstanding effective lubricating temperature range, -50°F to 450°F Unsurpassed oxidation stability Compatibility with most mineral oil-based greases Lithium-complex thickener: High dropping (melting) points to 500°F(260°C) Outstanding shear stability. These greases do not thin out when worked in the application Reduces grease product needs. LUBRICANT CONSOLIDATION Multi-functional additive system: Prevents wear Prevents rust and corrosion Prevents grease bleed Data Sheet

LUBRIPLATE Low Temp is an anhydrous calcium, NLGI 1-1/2 grade lubricant with excellent cold operating characteristics. LUBRIPLATE Low Temp is an unusual lubricant having many applications other than the applications suggested by the name. LUBRIPLATE Low Temp has a wide operating range from pump ability at -60°F to an ASTM Dropping Point of 280°F, providing a workable range from -60°F to 250°F. ADVANTAGES Wide temperature range lubricating ability Anti-wear protection Extremely water-resistant Oxidation and corrosion inhibited LUBRIPLATE Low Temp is not approved against any Military Specification, but has been recommended and used in applications where the following Military Specifications were designated with excellent results: MIL-G-10924A, MIL-G-25537, MIL-G-23827, MIL-G-7118, MIL-G-10924B, MIL-G-3278, MILG-7112 APPLICATIONS LUBRIPLATE Low Temp has many successful applications including a few listed below: Railroad switch lubricant General- purpose low temperature lubricant for chains, ball and roller bearings etc. Ball and roller bearings operating at high rpm’s Overrunning clutch lubricant Conveyors operating in cold rooms, freezers and outside Valve packing lubricant Electronic equipment and accessories “Genie” Automatic Garage Door Openers Data Sheet

LUBRIPLATE Low Temp is an anhydrous calcium, NLGI 1-1/2 grade lubricant with excellent cold operating characteristics. LUBRIPLATE Low Temp is an unusual lubricant having many applications other than the applications suggested by the name. LUBRIPLATE Low Temp has a wide operating range from pump ability at -60°F to an ASTM Dropping Point of 280°F, providing a workable range from -60°F to 250°F. ADVANTAGES Wide temperature range lubricating ability Anti-wear protection Extremely water-resistant Oxidation and corrosion inhibited LUBRIPLATE Low Temp is not approved against any Military Specification, but has been recommended and used in applications where the following Military Specifications were designated with excellent results: MIL-G-10924A, MIL-G-25537, MIL-G-23827, MIL-G-7118, MIL-G-10924B, MIL-G-3278, MILG-7112 APPLICATIONS LUBRIPLATE Low Temp has many successful applications including a few listed below: Railroad switch lubricant General- purpose low temperature lubricant for chains, ball and roller bearings etc. Ball and roller bearings operating at high rpm’s Overrunning clutch lubricant Conveyors operating in cold rooms, freezers and outside Valve packing lubricant Electronic equipment and accessories “Genie” Automatic Garage Door Openers Data Sheet

LUBRIPLATE 3H DIRECT has been specially formulated from USP ingredients to provide food producers with a lubricating grease suitable for those applications where contact with food is possible. LUBRIPLATE 3H DIRECT is NSF/3H Registered (Release Agent for grills, ovens, loaf pans, boning benches, chopping boards, or other hard surfaces in contact with meat and poultry food products to prevent food from adhering during processing). LUBRIPLATE 3H DIRECT is dielectric. APPLICATIONS Anti-Friction Bearings, Plain Bearings, Guides & Seals Machine Parts Requiring Grease Lubrication and In Direct Contact with the Food Product Slicing Blade Lubrication. Especially Effective at Start Up Prior to Food Product Providing Blade Lubrication (Extends Blade life) Also, NSF H1 Food Grade Registered, can replace H1 Greases When Direct Food Contact is Also Needed Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLE Data Sheet Flyer

LUBRIPLATE 3H DIRECT has been specially formulated from USP ingredients to provide food producers with a lubricating grease suitable for those applications where contact with food is possible. LUBRIPLATE 3H DIRECT is NSF/3H Registered (Release Agent for grills, ovens, loaf pans, boning benches, chopping boards, or other hard surfaces in contact with meat and poultry food products to prevent food from adhering during processing). LUBRIPLATE 3H DIRECT is dielectric. APPLICATIONS Anti-Friction Bearings, Plain Bearings, Guides & Seals Machine Parts Requiring Grease Lubrication and In Direct Contact with the Food Product Slicing Blade Lubrication. Especially Effective at Start Up Prior to Food Product Providing Blade Lubrication (Extends Blade life) Also, NSF H1 Food Grade Registered, can replace H1 Greases When Direct Food Contact is Also Needed Aerosol package utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLE Data Sheet Flyer

LUBRIPLATE Mo-Lith No. 2 is exactly what the name indicates -- a moly-lithium lubricant – containing Technical Fine Molybdenum Disulfide. The use of moly has been widely acclaimed by various members in the lubricant field: however, unless the correct amount is used, it has little affect on the end result. Likewise, the base grease that carries the moly must be of premium quality or the benefits are not forthcoming. In LUBRIPLATE Mo-Lith No. 2, we have compounded the optimum percentage of moly for the greatest performance. APPLICATIONS Recommended as a primary friction barrier lubricant ADVANTAGES Anti-wear/extreme pressure reinforced by the addition of Molybdenum Disulfide (MoS2) Non-corrosive High water resistance Data Sheet

LUBRIPLATE Mo-Lith No. 2 is exactly what the name indicates -- a moly-lithium lubricant – containing Technical Fine Molybdenum Disulfide. The use of moly has been widely acclaimed by various members in the lubricant field: however, unless the correct amount is used, it has little affect on the end result. Likewise, the base grease that carries the moly must be of premium quality or the benefits are not forthcoming. In LUBRIPLATE Mo-Lith No. 2, we have compounded the optimum percentage of moly for the greatest performance. APPLICATIONS Recommended as a primary friction barrier lubricant ADVANTAGES Anti-wear/extreme pressure reinforced by the addition of Molybdenum Disulfide (MoS2) Non-corrosive High water resistance Data Sheet

LUBRIPLATE Metal Working Fluid is a specially developed product suitable for a variety of metal working applications. ADVANTAGES Does not contain Fluorocarbons Does not contain 1,1,1 Trichloroethane Utilizes LUBRIPLATE’S SECURE STRAW DUAL SPRAY NOZZLE APPLICATIONS The 12-ounce aerosol can, including extension spout, makes it the ideal lubricant for: Drilling Sawing Tapping Grinding Thread Chasing Pipe Cutting Filing Nut Busting Data Sheet

LUBRIPLATE MAG-00 is a shear stable, multi-functional, non-corrosive extreme pressure, water resistant, semifluid polymer type lubricant for both plain and anti-friction bearings, gears, cams and slides. This polymer lubricant will provide long service over a wide temperature range. ADVANTAGES LUBRIPLATE MAG-00 saves energy, time, money and lubricants Polymer shear stable High film strength, low torque Prevents wear, rust and corrosion Wide operating temperature range Exceptional load carrying film APPLICATIONS LUBRIPLATE MAG-00 is recommended for a large variety of applications: Centralized lubricating systems, especially those operating under wide temperature ranges Track roll reservoirs using a semi-fluid lubricant Gear cases under various and adverse operating conditions. Trailer landing gear cases Steering gear boxes and columns using semi-fluid operating conditions Roller bearing guide pin sleeves (high speed) on machine tools Automatic lubricators using a soft lubricant Spindle box gear grease Cotton picker semi-fluid lubricant Data Sheet

LUBRIPLATE “Oil Well” in a Bottle is a lubricating, penetrating, moisture displacement, “wet start” and cleansing fluid designed for a multitude of applications. APPLICATIONS Typical uses include: Chains Cables Locks Hinges Latches Slides Rusty Nuts & Bolts Moisture Displacement ADVANTAGES The moisture displacement properties of LUBRIPLATE “Oil Well” in a Bottle make it an excellent choice for “wet start” applications. LUBRIPLATE “Oil Well” in a Bottle possesses exceptional rust-proofing properties. Its light viscosity promotes excellent wetting characteristics which will quickly spread to cover the applied area. LUBRIPLATE “Oil Well” in a Bottle hand pump spray does not contain Fluorocarbons or 1,1,1-Trichloroethane. This non-aerosol formula is non-flammable and does not contain any solvents or propellants which will give you 100% lubricant for your money. Data Sheet

LUBRIPLATE MAG-1 is a polymer type lubricant for both plain and anti-friction bearings, gears, cams and slides that will provide long service over a wide temperature range. LUBRIPLATE MAG-1 is especially designed to provide high film strength and also to provide for low torque or power reduction. LUBRIPLATE MAG-1 is designed to provide lubrication over a wide temperature range from -60°F (-51°C) to +300°F (149°C). APPLICATIONS For use at low temperatures. Applications such as freezers and fifth wheels. ADVANTAGES LUBRIPLATE MAG-1 saves energy, time, money and lubricants. Polymer shear stable High film strength, low torque Prevents wear, rust and corrosion Wide operating temperature range Exceptional load carrying film Data Sheet

This heavy-duty, extreme pressure type, aluminum complex grease with moly, copper and graphite, is made for use on most types of heavy-duty power hammers. ADVANTAGES Greatly extends shaft and bushing life Data Sheet

This heavy-duty, extreme pressure type, aluminum complex grease with moly, copper and graphite, is made for use on most types of heavy-duty power hammers. ADVANTAGES Greatly extends shaft and bushing life Data Sheet